As of I3c7aed1bdb45db728d319f7d757400e44d232283 the Bluetooth stack
defaults to reasonable defaults that should work for all devices.
Change-Id: I056d63c4c8a2727e384172e964dc0000b6773504
Since updating QMI blobs from sweet Android 12 the cnss-daemon
from Android 11 (on devices with no stock Android 12) fails to
get the correct MAC address. Commonize cnss-daemon to fix the
mismatch. Xiaomis cnss-daemon loads device specific custom
bdwlan firmware and fortunately the one from sweet seems to
support all in-house xiaomi sm6150 devices. However it does
not contain the firmware names for longcheer devices (surya).
But since these devices also need an updated cnss-daemon, they
are suggested to apply a patch like this: [1] to mount their
firmware with the default name (bdwlan.bin) in order to not
loose the tuning with sweet cnss-daemon.
This commit also makes cnss-daemon a module, which it wasn't
before the removal.
[1]: 3595347298
This reverts commit 605de37605.
Change-Id: I17d7aa0cf141fc153a12ff3334178ea3e7091873
System properties set with the "=" operator cannot be overriden. This
device is used elsewhere in the system and some of the properties need
to be overridden. The "?=" operator will use the assigned value if no
other values are assigned elsewhere, allowing for overrides.
Bug: 230638462
Test: adb shell getprop | grep bluetooth
Change-Id: Id6cd7901555edafef141bbc1bbd5e06dc3a54d0c
The class of device is a string with a list of uint8t values:
90,2,12
The meaning is as follows:
{Service Field, Major class, Minor class}
Service Field: 0x5A -> 90
Bit 17: Networking
Bit 19: Capturing
Bit 20: Object Transfer
Bit 22: Telephony
MAJOR_CLASS: 0x02 -> 2 (Phone)
MINOR_CLASS: 0x0C -> 12 (Smart Phone)
Bug: 217452259
Test: make -j; -- check that bluetooth.device.class_of_device is
correct
Change-Id: I24fd57bacbf6786a26f7079e7a6e9857dbe170d1
This common tree is updated further than the EOL state of
some devices now. For EOL devices we can not update the
device specific proprietary vendor blobs. Since the vendor
security patch level should be set according to the least
updated components in vendor this differs betweeen devices,
hence decommonize it so that devices with up-to-date stock
can update it.
Change-Id: I320b2f93f7b78d01393259662450f328bbef5484
The values provided in gnss_antenna_info.conf are
for illustration purpose only and should not be
used in production
Change-Id: I29afd24893e95b918126c4dc7b94e064b39920b7
CRs-fixed: 2967039
Tag Block grouping is used to report more than 12 SVs in GSA.
It is controlled by item NMEA_TAG_BLOCK_GROUPING_ENABLED in
gps.conf and only applicable to GSA.
Change-Id: Id9b89af96419c179554ce9f5c8d702f19153ed32
CRs-Fixed: 2813599
For earpiece to be properly enumerated as a output device,
set valid and supported out_ channel mask.
Change-Id: Ic83b009956ff43567b3acbb186d0069b16e91e83
Adding stereo config channel support to usb surround sound proflle
to address CTS-V failure issue seen due to mismatch in channel mask
support for record usecase
Change-Id: Ib50511d2fa6df24b3aa4764553cd48726129b2c2
Add support to set "ro.netflix.bsp_rev" property at run time
depending on the target. This is needed when 2 or targets are
binary compatible, but have different Netflix proprty for
device whitelisting.
Change-Id: Ieccd17128f1b73c819a3f33816eb8c402cfa17e2
Increase the log level to '4', which would only log KERN_ERR
and lower, onto the console.Earlier it was incorrectly reduced
to 3 which would only log KERN_CRIT and lower.
Fixes: 06b604b6bef40abdb4b507fc13debb2146a922e1("Decrease the console log level")
Change-Id: Ic87d037450dd49138c3208e1b9f844469550364b
