########################## Start of libnfc-nci.conf ###########################
###############################################################################
# Application options
NFC_DEBUG_ENABLED=1

###############################################################################
# performance measurement
# Change this setting to control how often USERIAL log the performance (throughput)
# data on read/write/poll
# defailt is to log performance dara for every 100 read or write
#REPORT_PERFORMANCE_MEASURE=100

###############################################################################
# File used for NFA storage
NFA_STORAGE="/data/nfc"

###############################################################################
# Configure the default NfcA/IsoDep techology and protocol route. Can be
# either a secure element (e.g. 0xF4) or the host (0x00)
#DEFAULT_ISODEP_ROUTE=0x00

###############################################################################
## Default poll duration (in ms)
## The defualt is 500ms if not set
NFA_DM_DISC_DURATION_POLL=500

###############################################################################
# Force UICC to only listen to the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
UICC_LISTEN_TECH_MASK=0x07

###############################################################################
# Force HOST listen feature enable or disable.
# 0: Disable
# 1: Enable
HOST_LISTEN_ENABLE=0x01

###############################################################################
# When screen is turned off, specify the desired power state of the controller.
# 0: power-off-sleep state; DEFAULT
# 1: full-power state
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
SCREEN_OFF_POWER_STATE=1

###############################################################################
# Force tag polling for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
#            NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
#            NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
# NFA_TECHNOLOGY_MASK_B             0x02    /* NFC Technology B             */
# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
# NFA_TECHNOLOGY_MASK_ISO15693	    0x08    /* Proprietary Technology       */
# NFA_TECHNOLOGY_MASK_KOVIO         0x20    /* Proprietary Technology       */
# NFA_TECHNOLOGY_MASK_ACTIVE        0x40    /* NFC Technology active mode   */
POLLING_TECH_MASK=0x4F

###############################################################################
# Force P2P to only listen for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A	            0x01    /* NFC Technology A             */
# NFA_TECHNOLOGY_MASK_F	            0x04    /* NFC Technology F             */
# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
P2P_LISTEN_TECH_MASK=0x45

###############################################################################
PRESERVE_STORAGE=0x01

###############################################################################
# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
# The value is set to 3 by default as it assumes we will discover 0xF2,
# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
# so that the stack will not wait any longer than necessary.
# Maximum EE supported number
# NXP PN547C2 0x02
# NXP PN65T 0x03
# NXP PN548C2 0x02
# NXP PN66T 0x03
NFA_MAX_EE_SUPPORTED=0x03

##############################################################################
# Deactivate notification wait time out in seconds used in ETSI Reader mode
# 0 - Infinite wait
NFA_DM_DISC_NTF_TIMEOUT=100

###############################################################################
# AID_MATCHING constants
# AID_MATCHING_EXACT_ONLY 0x00
# AID_MATCHING_EXACT_OR_PREFIX 0x01
# AID_MATCHING_PREFIX_ONLY 0x02
#AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
AID_MATCHING_MODE=0x03

###############################################################################
# Preferred Secure Element for Technology based routing
# eSE               0x01
# UICC              0x02
NXP_PRFD_TECH_SE=0x01

################################################################################
#Set bit to 1 , black list is enabled
#Set bit to 0,  to disable balcklist
NFA_AID_BLOCK_ROUTE=0x01

################################################################################
# Maximum WTX requests entertained by MW
NXP_WM_MAX_WTX_COUNT=50

################################################################################
#Set the default Felica T3T System Code :
#This settings will be used when application does not set this parameter
DEFAULT_SYS_CODE={FE:FF}

#########################################################################
#Set NCI credit notification timeout value
NXP_NCI_CREDIT_NTF_TIMEOUT=2