######################################### # Log verbosity control for izat modules ######################################### # OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5 IZAT_DEBUG_LEVEL = 2 ################################################## # Select WIFI Wait Timeout value in seconds for SUPL ################################################## WIFI_WAIT_TIMEOUT_SELECT = 0 ################################################## # Time interval of injecting SRN scan data to modem # time in seconds. # Note: recommended value is between 1-5 sec ################################################## LPPE_SRN_DATA_SCAN_INJECT_TIME=2 ################################ # NLP Settings ################################ # NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred # For Automotive products, please use NLP_MODE = 4 only. # NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode # to determine how much Tolerance for first position # NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode # to determine how much Tolerance for positions after first # NLP_THRESHOLD: Sets how many failures needed before # switching preferred NLP in Combo mode # NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy # must be, in multiples, between two NLP location reports to # be considered much worse accuracy. Used in switching logic # NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines # whether or not to still send network location requests to # QNP when the EULA is not consented to by the user. QNP can # still return ZPP locations or injected locations even # without EULA consent, but the uncertainty can be high. # QNP preferred mode prefers QNP when there is EULA consent, # otherwise OSNLP is used. NLP_MODE = 1 NLP_MODE_EMERGENCY = 2 NLP_TOLERANCE_TIME_FIRST = 5000 NLP_TOLERANCE_TIME_AFTER = 20000 NLP_THRESHOLD = 3 NLP_ACCURACY_MULTIPLE = 2 NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1 ######################################### # NLP PACKAGE SETTINGS ######################################### # OSNLP_PACKAGE: name of default NLP package OSNLP_PACKAGE = com.google.android.gms # REGION_OSNLP_PACKAGE: # This value will be used as alternative # for particular region where default NLP is not functional. #REGION_OSNLP_PACKAGE = ################################### # GEOFENCE SERVICES ################################### # If set to one of the defined values below, it will override # the responsiveness for geofence services, which implements # the Proximity Alert API. If not set to a value defined below, # which is default, it will not override the responsivness. # The geofence HAL API is unaffected by this value. # GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values: # 1: LOW responsiveness # 2: MEDIUM responsiveness # 3: HIGH responsiveness GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0 ##################################### #GTP Opt-In app ##################################### #GTP privacy policy version url #https support is required GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html #GTP privacy policy version download retry interval #unit is second. default is 86400 GTP_PRIVACY_RETRY_INTERVAL = 86400 ##################################### # IZAT PREMIUM FEATURE SETTINGS ##################################### #Possible states of a feature: #DISABLED #BASIC #PREMIUM #GTP_MODE valid modes: # DISABLED # LEGACY_WWAN # SDK (WWAN not available for Modems before LocTech 10.0) GTP_MODE=DISABLED #GTP_WAA valid modes: # DISABLED # BASIC GTP_WAA=DISABLED #SAP valid modes: # DISABLED # BASIC # PREMIUM SAP=PREMIUM #FREE_WIFI_SCAN_INJECT valid modes: #DISABLED #BASIC FREE_WIFI_SCAN_INJECT=BASIC #SUPL_WIFI valid modes: #DISABLED #BASIC SUPL_WIFI=BASIC #WIFI_SUPPLICANT_INFO valid modes: #DISABLED #BASIC WIFI_SUPPLICANT_INFO=BASIC ##################################### # Location process launcher settings ##################################### # DO NOT MODIFY # Modifying below attributes without # caution can have serious implications. #Values for PROCESS_STATE: # ENABLED # DISABLED #PROCESS_NAME # Name of the executable file. #FEATURE MASKS: # GTP-WIFI 0X03 # GTP-MP-CELL 0xc00 # GTP-WAA 0x100 # SAP 0Xc0 # ODCPI 0x1000 # FREE_WIFI_SCAN_INJECT 0x2000 # SUPL_WIFI 0x4000 # WIFI_SUPPLICANT_INFO 0x8000 #Values for PLATFORMS can be: #1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226 #2. 'all' or 'all exclude' -> for All platforms #3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937 #Values for BASEBAND can be: #1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2 #2. 'all' or 'all exclude' -> for all basebands #3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte PROCESS_NAME=lowi-server PROCESS_ARGUMENT= PROCESS_STATE=ENABLED PROCESS_GROUPS=gps wifi inet oem_2901 PREMIUM_FEATURE=0 IZAT_FEATURE_MASK=0xf303 PLATFORMS=all BASEBAND=all HARDWARE_TYPE=all VENDOR_ENHANCED_PROCESS=0 PROCESS_NAME=xtwifi-inet-agent PROCESS_ARGUMENT= PROCESS_STATE=ENABLED PROCESS_GROUPS=inet gps PREMIUM_FEATURE=1 IZAT_FEATURE_MASK=0xc03 PLATFORMS=all BASEBAND=all HARDWARE_TYPE=all VENDOR_ENHANCED_PROCESS=1 PROCESS_NAME=xtwifi-client PROCESS_ARGUMENT= PROCESS_STATE=ENABLED PROCESS_GROUPS=wifi inet gps system oem_2904 PREMIUM_FEATURE=1 IZAT_FEATURE_MASK=0xd03 PLATFORMS=all BASEBAND=all HARDWARE_TYPE=all VENDOR_ENHANCED_PROCESS=1 PROCESS_NAME=slim_daemon PROCESS_ARGUMENT= PROCESS_STATE=DISABLED PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors PREMIUM_FEATURE=1 IZAT_FEATURE_MASK=0xf0 PLATFORMS=all BASEBAND=all HARDWARE_TYPE=all VENDOR_ENHANCED_PROCESS=1 PROCESS_NAME=xtra-daemon PROCESS_ARGUMENT= PROCESS_STATE=ENABLED PROCESS_GROUPS=inet gps system PREMIUM_FEATURE=0 IZAT_FEATURE_MASK=0 PLATFORMS=all BASEBAND=all HARDWARE_TYPE=all VENDOR_ENHANCED_PROCESS=0 ######################################## # Engine Service which host DRE module # # To enable DRE engine service, change # # PROCESS_STATE=ENABLED # ######################################## PROCESS_NAME=engine-service PROCESS_ARGUMENT=DRE-INT libloc_epDr.so PROCESS_STATE=DISABLED PROCESS_GROUPS=gps diag inet qwes oem_2901 system PREMIUM_FEATURE=0 IZAT_FEATURE_MASK=0 PLATFORMS=all BASEBAND=all HARDWARE_TYPE=all VENDOR_ENHANCED_PROCESS=1 ######################################## # Engine Service which host PPE module # # To enable PPE engine service, change # # PROCESS_STATE=ENABLED # # and update process arugements # # with PPE library name # #PROCESS_ARGUMENT=PPE libepsimulator.so# ######################################## PROCESS_NAME=engine-service PROCESS_ARGUMENT=PPE libepsimulator.so PROCESS_STATE=DISABLED PROCESS_GROUPS=gps diag inet oem_2901 PREMIUM_FEATURE=0 IZAT_FEATURE_MASK=0 PLATFORMS=all BASEBAND=all HARDWARE_TYPE=all VENDOR_ENHANCED_PROCESS=1