sweet: Move NFC configs to vendor
Change-Id: Id6dc9052673afd4ca6f32af154cb8c7a50ccf479
This commit is contained in:
Alexander Winkowski
basamaryan
parent
6ed4c96703
commit
12ef45d42e
@ -1,103 +0,0 @@
|
|||||||
###################### Start of libnfc-common.conf #######################
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Application options
|
|
||||||
APPL_TRACE_LEVEL=0xFF
|
|
||||||
PROTOCOL_TRACE_LEVEL=0xFFFFFFFF
|
|
||||||
|
|
||||||
NFC_DEBUG_ENABLED=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# File used for NFA storage
|
|
||||||
NFA_STORAGE="/data/nfc"
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Force UICC to only listen to the following technology(s).
|
|
||||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
|
||||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
|
|
||||||
UICC_LISTEN_TECH_MASK=0x07
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Configure the default Destination Gate used by HCI (the default is 4, which
|
|
||||||
# is the ETSI loopback gate.
|
|
||||||
NFA_HCI_DEFAULT_DEST_GATE=0xF0
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Forcing HOST to listen for a selected protocol
|
|
||||||
# 0x00 : Disable Host Listen
|
|
||||||
# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A
|
|
||||||
# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B
|
|
||||||
# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F
|
|
||||||
# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
|
|
||||||
HOST_LISTEN_TECH_MASK=0x07
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Enabling/Disabling Forward functionality
|
|
||||||
# Disable 0x00
|
|
||||||
# Enable 0x01
|
|
||||||
NXP_FWD_FUNCTIONALITY_ENABLE=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# AID for Empty Select command
|
|
||||||
# If specified, this AID will be substituted when an Empty SELECT command is
|
|
||||||
# detected. The first byte is the length of the AID. Maximum length is 16.
|
|
||||||
AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# When screen is turned off, specify the desired power state of the controller.
|
|
||||||
# 0: power-off-sleep state; DEFAULT
|
|
||||||
# 1: full-power state
|
|
||||||
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
|
|
||||||
SCREEN_OFF_POWER_STATE=1
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Default poll duration (in ms)
|
|
||||||
# The defualt is 500ms if not set (see nfc_target.h)
|
|
||||||
#NFA_DM_DISC_DURATION_POLL=333
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Force tag polling for the following technology(s).
|
|
||||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
|
||||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
|
|
||||||
# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
|
|
||||||
# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
|
|
||||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
|
|
||||||
#
|
|
||||||
# Notable bits:
|
|
||||||
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
|
||||||
# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
|
|
||||||
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
|
||||||
# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
|
|
||||||
# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
|
|
||||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
|
|
||||||
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
|
|
||||||
POLLING_TECH_MASK=0xEF
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Force P2P to only listen for the following technology(s).
|
|
||||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
|
||||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
|
|
||||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
|
|
||||||
#
|
|
||||||
# Notable bits:
|
|
||||||
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
|
||||||
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
|
||||||
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
|
|
||||||
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
|
|
||||||
P2P_LISTEN_TECH_MASK=0xC5
|
|
||||||
|
|
||||||
PRESERVE_STORAGE=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Deactivate notification wait time out in seconds used in ETSI Reader mode
|
|
||||||
# 0 - Infinite wait
|
|
||||||
NFA_DM_DISC_NTF_TIMEOUT=0
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# AID_MATCHING constants
|
|
||||||
# AID_MATCHING_EXACT_ONLY 0x00
|
|
||||||
# AID_MATCHING_EXACT_OR_PREFIX 0x01
|
|
||||||
# AID_MATCHING_PREFIX_ONLY 0x02
|
|
||||||
AID_MATCHING_MODE=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
@ -1,567 +0,0 @@
|
|||||||
#============================================================================
|
|
||||||
# File Name: libnfc-nxp.conf
|
|
||||||
#
|
|
||||||
# Description:
|
|
||||||
# NFC configuration management file
|
|
||||||
#
|
|
||||||
# Modification History:
|
|
||||||
# Revision 1.0 2017/01/04 20:50:20 xiaohua.wang@xiaomi.com
|
|
||||||
# Initial draft version for Xiaomi C1 P2 board
|
|
||||||
#
|
|
||||||
# Revision 1.1 2017/03/01 16:32:09 xiaohua.wang@xiaomi.com
|
|
||||||
# Upgrade NFCC firmware version to 11.1.E
|
|
||||||
#
|
|
||||||
# Revision 1.2 2017/06/30 23:45:41 xiaohua.wang@xiaomi.com
|
|
||||||
# Improved notification management of received NCI Mode Set
|
|
||||||
#
|
|
||||||
# Revision 1.3 firmware version to 11.1.13/14
|
|
||||||
# Kevin.hu@nxp.com 2017/09/05 16:06:41
|
|
||||||
#=============================================================================
|
|
||||||
|
|
||||||
# FW_VERSION=ALMSL 11.1.13/14
|
|
||||||
# DEVICE_MANUFACTURER=Xiaomi
|
|
||||||
# DEVICE_MODEL=E1
|
|
||||||
|
|
||||||
# This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn5x)
|
|
||||||
# and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn5x)
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Application options
|
|
||||||
# Logging Levels
|
|
||||||
# NXPLOG_DEFAULT_LOGLEVEL 0x01
|
|
||||||
# ANDROID_LOG_DEBUG 0x03
|
|
||||||
# ANDROID_LOG_WARN 0x02
|
|
||||||
# ANDROID_LOG_ERROR 0x01
|
|
||||||
# ANDROID_LOG_SILENT 0x00
|
|
||||||
#
|
|
||||||
NXPLOG_EXTNS_LOGLEVEL=0x03
|
|
||||||
NXPLOG_NCIHAL_LOGLEVEL=0x03
|
|
||||||
NXPLOG_NCIX_LOGLEVEL=0x03
|
|
||||||
NXPLOG_NCIR_LOGLEVEL=0x03
|
|
||||||
NXPLOG_FWDNLD_LOGLEVEL=0x03
|
|
||||||
NXPLOG_TML_LOGLEVEL=0x03
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Nfc Device Node name
|
|
||||||
NXP_NFC_DEV_NODE="/dev/nq-nci"
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Extension for Mifare reader enable
|
|
||||||
MIFARE_READER_ENABLE=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Vzw Feature enable
|
|
||||||
VZW_FEATURE_ENABLE=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# File name for Firmware
|
|
||||||
NXP_FW_NAME="libpn553_fw.so"
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# System clock source selection configuration
|
|
||||||
#define CLK_SRC_XTAL 1
|
|
||||||
#define CLK_SRC_PLL 2
|
|
||||||
|
|
||||||
NXP_SYS_CLK_SRC_SEL=0x02
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# System clock frequency selection configuration
|
|
||||||
#define CLK_FREQ_13MHZ 1
|
|
||||||
#define CLK_FREQ_19_2MHZ 2
|
|
||||||
#define CLK_FREQ_24MHZ 3
|
|
||||||
#define CLK_FREQ_26MHZ 4
|
|
||||||
#define CLK_FREQ_32MHZ 5
|
|
||||||
#define CLK_FREQ_38_4MHZ 6
|
|
||||||
#define CLK_FREQ_52MHZ 7
|
|
||||||
NXP_SYS_CLK_FREQ_SEL=0x02
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# The timeout value to be used for clock request acknowledgment
|
|
||||||
# min value = 0x01 to max = 0x06
|
|
||||||
|
|
||||||
NXP_SYS_CLOCK_TO_CFG=0x06
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# NXP proprietary settings
|
|
||||||
NXP_ACT_PROP_EXTN={2F, 02, 00}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Standby enable settings
|
|
||||||
NXP_CORE_STANDBY={2F, 00, 01, 01}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# NXP TVDD configurations settings
|
|
||||||
# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
|
|
||||||
# out of them only one can be configured at a time.
|
|
||||||
NXP_EXT_TVDD_CFG=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#config1:SLALM, 3.6V for both RM and CM
|
|
||||||
NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, 01, 31, 00, 00, 00, 10, 00, 10, 0C}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
|
|
||||||
# monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
|
|
||||||
NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, BA, 1E, 15, 00, D0, 0C}
|
|
||||||
|
|
||||||
#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC,
|
|
||||||
# DCDCWaitTime=4.2ms
|
|
||||||
NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 40, 0A}
|
|
||||||
|
|
||||||
NXP_RF_CONF_BLK_1={
|
|
||||||
20, 02, E7, 1B,
|
|
||||||
A0, 0D, 06, 06, 37, 08, 76, 00, 00,
|
|
||||||
A0, 0D, 03, 24, 03, 7E,
|
|
||||||
A0, 0D, 06, 02, 35, 00, 3E, 00, 00,
|
|
||||||
A0, 0D, 06, 04, 35, 2D, 02, 70, 02,
|
|
||||||
A0, 0D, 06, C2, 35, 00, 3E, 00, 03,
|
|
||||||
A0, 0D, 06, 04, 42, F8, 40, FF, FF,
|
|
||||||
A0, 0D, 04, 32, 42, F8, 40,
|
|
||||||
A0, 0D, 04, 46, 42, 68, 40,
|
|
||||||
A0, 0D, 04, 56, 42, 78, 40,
|
|
||||||
A0, 0D, 04, 5C, 42, 80, 40,
|
|
||||||
A0, 0D, 04, CA, 42, 68, 40,
|
|
||||||
A0, 0D, 06, 06, 42, 00, 02, F8, F8,
|
|
||||||
A0, 0D, 06, 32, 4A, 53, 07, 00, 1B,
|
|
||||||
A0, 0D, 06, 46, 4A, 33, 07, 00, 07,
|
|
||||||
A0, 0D, 06, 56, 4A, 43, 07, 00, 07,
|
|
||||||
A0, 0D, 06, 5C, 4A, 11, 07, 01, 07,
|
|
||||||
A0, 0D, 06, 34, 44, 66, 0A, 00, 00,
|
|
||||||
A0, 0D, 06, 48, 44, 65, 0A, 00, 00,
|
|
||||||
A0, 0D, 06, 58, 44, 55, 08, 00, 00,
|
|
||||||
A0, 0D, 06, 5E, 44, 55, 08, 00, 00,
|
|
||||||
A0, 0D, 06, CA, 44, 65, 0A, 00, 00,
|
|
||||||
A0, 0D, 06, 06, 44, 04, 04, C4, 00,
|
|
||||||
A0, 0D, 06, 34, 2D, DC, 20, 04, 00,
|
|
||||||
A0, 0D, 06, 48, 2D, 15, 34, 1F, 01,
|
|
||||||
A0, 0D, 06, 58, 2D, 0D, 48, 0C, 01,
|
|
||||||
A0, 0D, 06, 5E, 2D, 0D, 5A, 0C, 01,
|
|
||||||
A0, 0D, 06, CA, 2D, 15, 34, 1F, 01
|
|
||||||
}
|
|
||||||
|
|
||||||
# Enable DLMA
|
|
||||||
NXP_RF_CONF_BLK_2={
|
|
||||||
20, 02, D6, 01, A0, 34, D2, 23, 04, 18, 47, 40, 00, 00, 40, 00, 49, 00, 40, 00, 6F, 00, 40, 00, B3, 00, 40, 00, 13, 01, 40, 00, A5, 01, 40, 00, 5E, 02, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00, 00, 00, 00, 00, 47, 00, 00, 40, 00, 49, 00, 40, 00, 6F, 00, 40, 00, B3, 00, 40, 00, 13, 01, 40, 00, A5, 01, 40, 00, 5E, 02, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00
|
|
||||||
}
|
|
||||||
|
|
||||||
# Disable DPC
|
|
||||||
NXP_RF_CONF_BLK_3={
|
|
||||||
20, 02, 5B, 01, A0, 0B, 57, 11, 11, 90, 78, 0F, 4E, 00, 3D, 95, 00, 00, 3D, 9F, 00, 00, 50, 9F, 00, 00, 59, 9F, 00, 00, 5A, 9F, 00, 00, 64, 9F, 00, 00, 65, 9F, 00, 00, 6E, 9F, 00, 00, 72, 9F, 00, 00, 79, 9F, 00, 00, 7B, 9F, 00, 00, 84, 9F, 00, 00, 86, 9F, 00, 00, 8F, 9F, 00, 00, 91, 9F, 00, 00, 9A, 9F, 00, 00, A1, 9F, 00, 00, A7, 9F, 00, 00, B0, 1F, 00, 00, B9, 1F, 00, 00
|
|
||||||
}
|
|
||||||
|
|
||||||
# CE detector/phase
|
|
||||||
NXP_RF_CONF_BLK_4={
|
|
||||||
20, 02, 21, 04,
|
|
||||||
A0, 38, 04, 14, 0B, 0B, 00,
|
|
||||||
A0, 3A, 08, 1E, 00, 1E, 00, 1E, 00, 1E, 00,
|
|
||||||
A0, 0D, 06, 06, 16, 0E, 00, 1F, 00,
|
|
||||||
A0, B1, 02, BB, 08
|
|
||||||
}
|
|
||||||
###############################################################################
|
|
||||||
# Set configuration optimization decision setting
|
|
||||||
# Enable = 0x01
|
|
||||||
# Disable = 0x00
|
|
||||||
NXP_SET_CONFIG_ALWAYS=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Set configuration optimization decision setting
|
|
||||||
# Enable = 0x01
|
|
||||||
# Disable = 0x00
|
|
||||||
NXP_RF_UPDATE_REQ=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Core configuration extensions
|
|
||||||
# A009 - Time-out before standby
|
|
||||||
# A0EC - Disable/Enable SWP1 interface
|
|
||||||
# A0ED - Disable/Enable SWP2 interface
|
|
||||||
# A05E - Send RID automatically in Jewel Reader mode
|
|
||||||
# A012 - NFCEE interface 2 configuration
|
|
||||||
# A040 - Low Power Card Detector Enable
|
|
||||||
# A041 - Low Power Card Detector Threshold
|
|
||||||
# A042 - Low Power Card Detector Sampling
|
|
||||||
# A043 - Low Power Card Detector Hybrid
|
|
||||||
# A0D5 - SWP/DWP desired baudrate
|
|
||||||
# A0D8 - Configure the number of Sliding Windows used on DWP
|
|
||||||
# A0DD - Retry on SWP2 interface
|
|
||||||
# A0F2 - SVDD_PWR_REQ enable
|
|
||||||
# A09F - Add ON/OFF guard time for SVDD power management(Step value ~1mSec)
|
|
||||||
# A096 - Notify all AIDs
|
|
||||||
# A037 - SE DWP system configuration
|
|
||||||
NXP_CORE_CONF_EXTN={20, 02, 6B, 14,
|
|
||||||
A0, 09, 02, 90, 01,
|
|
||||||
A0, EC, 01, 01,
|
|
||||||
A0, ED, 01, 03,
|
|
||||||
A0, 5E, 01, 01,
|
|
||||||
A0, 12, 01, 02,
|
|
||||||
A0, 40, 01, 01,
|
|
||||||
A0, 41, 01, 05,
|
|
||||||
A0, 43, 01, 04,
|
|
||||||
A0, 46, 02, BA, 27,
|
|
||||||
A0, 47, 02, BA, 27,
|
|
||||||
A0, 81, 01, 01,
|
|
||||||
A0, D5, 01, 0A,
|
|
||||||
A0, D8, 01, 02,
|
|
||||||
A0, DD, 01, 2D,
|
|
||||||
A0, F2, 01, 01,
|
|
||||||
A0, 9F, 02, 08, 08,
|
|
||||||
A0, 96, 01, 01,
|
|
||||||
A0, 37, 01, 35,
|
|
||||||
A0, 3F, 01, 01,
|
|
||||||
A0, 29, 17, 19, 07, 40, 1C, 00, 02, 40, 1C, 00, 02, 00, 41, F4, F6, 00, 41, F4, F6, 38, 70, 00, 00, 00
|
|
||||||
}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
|
|
||||||
# NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01}
|
|
||||||
# NXP_CORE_RF_FIELD={ 2F, 32, 01, 01}
|
|
||||||
###############################################################################
|
|
||||||
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
|
|
||||||
# to 0x00
|
|
||||||
NXP_I2C_FRAGMENTATION_ENABLED=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Core configuration settings
|
|
||||||
NXP_CORE_CONF={ 20, 02, 2E, 0E,
|
|
||||||
28, 01, 00,
|
|
||||||
21, 01, 00,
|
|
||||||
30, 01, 08,
|
|
||||||
31, 01, 03,
|
|
||||||
32, 01, 60,
|
|
||||||
38, 01, 01,
|
|
||||||
33, 04, 01, 02, 03, 04,
|
|
||||||
54, 01, 06,
|
|
||||||
50, 01, 02,
|
|
||||||
5B, 01, 00,
|
|
||||||
80, 01, 01,
|
|
||||||
81, 01, 01,
|
|
||||||
82, 01, 0E,
|
|
||||||
18, 01, 01
|
|
||||||
}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Mifare Classic Key settings
|
|
||||||
# NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
|
|
||||||
# A0, 52, 06, D3, F7, D3, F7, D3, F7,
|
|
||||||
# A0, 53, 06, FF, FF, FF, FF, FF, FF,
|
|
||||||
# A0, 54, 06, 00, 00, 00, 00, 00, 00}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Enable SWP full power mode when phone is power off
|
|
||||||
NXP_SWP_FULL_PWR_ON=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#### Select the CHIP ####
|
|
||||||
#PN547C2 0x01
|
|
||||||
#PN65T 0x02
|
|
||||||
#PN548AD 0x03
|
|
||||||
#PN66T 0x04
|
|
||||||
#PN551 0x05
|
|
||||||
#PN67T 0x06
|
|
||||||
#PN553 0x07
|
|
||||||
#PN80T 0x08
|
|
||||||
NXP_NFC_CHIP=0x07
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# CE when Screen state is locked
|
|
||||||
# This setting is for DEFAULT_AID_ROUTE,
|
|
||||||
# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
|
|
||||||
# Disable 0x00
|
|
||||||
# Enable 0x01
|
|
||||||
NXP_CE_ROUTE_STRICT_DISABLE=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Timeout in secs to get NFCEE Discover notification
|
|
||||||
NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
NXP_DEFAULT_NFCEE_TIMEOUT=0x06
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Timeout in secs
|
|
||||||
NXP_SWP_RD_START_TIMEOUT=0x0A
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Timeout in secs
|
|
||||||
NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
|
|
||||||
# Set the default AID route Location :
|
|
||||||
# This settings will be used when application does not set this parameter
|
|
||||||
# host 0x00
|
|
||||||
# eSE 0x01
|
|
||||||
# UICC 0x02
|
|
||||||
# UICC2 0x04
|
|
||||||
DEFAULT_AID_ROUTE=0x02
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Set the Mifare Desfire route Location :
|
|
||||||
# Configure the default NfcA/IsoDep techology and protocol route. Can be
|
|
||||||
# either a secure element (e.g. 0xF4) or the host (0x00)
|
|
||||||
# host 0x00
|
|
||||||
# eSE 0x01
|
|
||||||
# UICC 0x02
|
|
||||||
# UICC2 0x04
|
|
||||||
DEFAULT_ISODEP_ROUTE=0x02
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Configure the single default SE to use. The default is to use the first
|
|
||||||
# SE that is detected by the stack. This value might be used when the phone
|
|
||||||
# supports multiple SE (e.g. 0xC0 and 0x80) but you want to force it to use
|
|
||||||
# one of them (e.g. 0xC0).
|
|
||||||
# host 0x00
|
|
||||||
# eSE 0x01
|
|
||||||
# UICC 0x02
|
|
||||||
DEFAULT_OFFHOST_ROUTE=0x02
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Configure the single default SE to use. The default is to use the first
|
|
||||||
# SE that is detected by the stack. This value might be used when the phone
|
|
||||||
# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
|
|
||||||
# one of them (e.g. 0xF4).
|
|
||||||
# host 0x00
|
|
||||||
# eSE 0x01
|
|
||||||
# UICC 0x02
|
|
||||||
# UICC2 0x04
|
|
||||||
DEFAULT_TECH_ABF_ROUTE=0x02
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Set the default Felica T3T System Code OffHost route Location :
|
|
||||||
#This settings will be used when application does not set this parameter
|
|
||||||
# host 0x00
|
|
||||||
# eSE 0x01
|
|
||||||
DEFAULT_SYS_CODE_ROUTE=0x02
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Set the default AID Power state :
|
|
||||||
#This settings will be used when application does not set this parameter
|
|
||||||
# bit pos 0 = Switch On
|
|
||||||
# bit pos 1 = Switch Off
|
|
||||||
# bit pos 2 = Battery Off
|
|
||||||
# bit pos 3 = Screen Off
|
|
||||||
# bit pos 4 = Screen Lock
|
|
||||||
DEFAULT_AID_PWR_STATE=0x1B
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Set the Mifare Desfire Power state :
|
|
||||||
#This settings will be used when application does not set this parameter
|
|
||||||
# bit pos 0 = Switch On
|
|
||||||
# bit pos 1 = Switch Off
|
|
||||||
# bit pos 2 = Battery Off
|
|
||||||
# bit pos 3 = Screen Off
|
|
||||||
# bit pos 4 = Screen Lock
|
|
||||||
DEFAULT_ISODEP_PWR_STATE=0x1B
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Set the Mifare CLT Power state :
|
|
||||||
#This settings will be used when application does not set this parameter
|
|
||||||
# bit pos 0 = Switch On
|
|
||||||
# bit pos 1 = Switch Off
|
|
||||||
# bit pos 2 = Battery Off
|
|
||||||
# bit pos 3 = Screen Off
|
|
||||||
# bit pos 4 = Screen Lock
|
|
||||||
DEFAULT_OFFHOST_PWR_STATE=0x1B
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Set Tech A,B,F Power state :
|
|
||||||
#This settings will be used when application does not set this parameter
|
|
||||||
# bit pos 0 = Switch On
|
|
||||||
# bit pos 1 = Switch Off
|
|
||||||
# bit pos 2 = Battery Off
|
|
||||||
# bit pos 3 = Screen Off
|
|
||||||
# bit pos 4 = Screen Lock
|
|
||||||
DEFAULT_TECH_ABF_PWR_STATE=0x1B
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Set the SYS_CODE Power state :
|
|
||||||
#This settings will be used when application does not set this parameter
|
|
||||||
# bit pos 0 = Switch On
|
|
||||||
# bit pos 1 = Switch Off
|
|
||||||
# bit pos 2 = Battery Off
|
|
||||||
# bit pos 3 = Screen Off
|
|
||||||
# bit pos 4 = Screen Lock
|
|
||||||
DEFAULT_SYS_CODE_PWR_STATE=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Configure the NFC Extras to open and use a static pipe. If the value is
|
|
||||||
# not set or set to 0, then the default is use a dynamic pipe based on a
|
|
||||||
# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
|
|
||||||
# for each UICC (where F3="UICC0" and F4="UICC1")
|
|
||||||
OFF_HOST_ESE_PIPE_ID=0x19
|
|
||||||
OFF_HOST_SIM_PIPE_ID=0x0A
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Bail out mode
|
|
||||||
# If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
|
|
||||||
NFA_POLL_BAIL_OUT_MODE=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# AID Matching platform options
|
|
||||||
# AID_MATCHING_L 0x01
|
|
||||||
# AID_MATCHING_K 0x02
|
|
||||||
AID_MATCHING_PLATFORM=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#CHINA_TIANJIN_RF_SETTING
|
|
||||||
#Enable 0x01
|
|
||||||
#Disable 0x00
|
|
||||||
NXP_CHINA_TIANJIN_RF_ENABLED=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#SWP_SWITCH_TIMEOUT_SETTING
|
|
||||||
# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
|
|
||||||
# Timeout in milliseconds, for example
|
|
||||||
# No Timeout 0x00
|
|
||||||
# 10 millisecond timeout 0x0A
|
|
||||||
NXP_SWP_SWITCH_TIMEOUT=0x0A
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Loader service version
|
|
||||||
# NFC service checks for LS version 2.0 or 2.1
|
|
||||||
# LS2.0 0x20
|
|
||||||
# LS2.1 0x21
|
|
||||||
# LS2.2 0x22
|
|
||||||
# AT NFC service intialization
|
|
||||||
NXP_LOADER_SERVICE_VERSION=0x22
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Timeout value in milliseconds for NFCC standby mode.The range is between 5000
|
|
||||||
#msec to 20000 msec and zero is to disable.
|
|
||||||
NXP_NFCC_STANDBY_TIMEOUT=20000
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Dynamic RSSI feature enable
|
|
||||||
# Disable 0x00
|
|
||||||
# Enable 0x01
|
|
||||||
NXP_AGC_DEBUG_ENABLE=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode
|
|
||||||
# For Technology routing to ESE Technology Mask = 4
|
|
||||||
# For ISO-DEP Protocol routing to ESE Mask = 2
|
|
||||||
# It can also take TECH|PROTO = 6
|
|
||||||
# To ignore the delay set mask to = 0
|
|
||||||
NXP_ESE_WIRED_PRT_MASK=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode
|
|
||||||
#For Technology routing to UICC Technology Mask = 4
|
|
||||||
#For ISO-DEP Protocol routing to UICC set Mask = 2
|
|
||||||
#For Select AID Routing to UICC set Mask = 1
|
|
||||||
#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay
|
|
||||||
#set mask = 0
|
|
||||||
NXP_UICC_WIRED_PRT_MASK=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#RF field true delay Wired Mode
|
|
||||||
# delay wired mode = 1
|
|
||||||
# allow wired mode = 0
|
|
||||||
NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# UICC mode supported
|
|
||||||
# Disable 0x00
|
|
||||||
# Enable 0x01
|
|
||||||
NXP_DUAL_UICC_ENABLE=0x00
|
|
||||||
###############################################################################
|
|
||||||
#Config to allow adding aids
|
|
||||||
#NFC on/off is required after this config
|
|
||||||
#1 = enabling adding aid to NFCC routing table.
|
|
||||||
#0 = disabling adding aid to NFCC routing table.
|
|
||||||
NXP_ENABLE_ADD_AID=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal
|
|
||||||
# JCOP CP TIMEOUT
|
|
||||||
NXP_CP_TIMEOUT={00, 77}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Enable/Disable checking default proto SE Id
|
|
||||||
# Disable 0x00
|
|
||||||
# Enable 0x01
|
|
||||||
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
|
|
||||||
#Enable/Disable block number checks for china transit use case
|
|
||||||
#Enable 0x01
|
|
||||||
#Disable 0x00
|
|
||||||
NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#Enable NXP NCI runtime parser library
|
|
||||||
#Enable 0x01
|
|
||||||
#Disable 0x00
|
|
||||||
NXP_NCI_PARSER_LIBRARY=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#This config will enable different level of Rf transaction debugs based on the
|
|
||||||
#following values provided. Decoded information will be printed in adb logcat
|
|
||||||
#Debug Mode Levels
|
|
||||||
#Disable Debug 0x00
|
|
||||||
#L1 Debug 0x01
|
|
||||||
#L2 Debug 0x02
|
|
||||||
#L1 & L2 Debug 0x03
|
|
||||||
#L1 & L2 & RSSI 0x04
|
|
||||||
#L1 & L2 & Felica 0x05
|
|
||||||
#NXP_CORE_PROP_SYSTEM_DEBUG=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Enable/Disable Block Route feature.
|
|
||||||
# Block Route will restrict routing to first matched rule
|
|
||||||
# Block Route enable 0x01
|
|
||||||
# Block Route disable 0x00
|
|
||||||
AID_BLOCK_ROUTE=0x01
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Enable or Disable RF_STATUS_UPDATE to EseHal module
|
|
||||||
# Disable 0x00
|
|
||||||
# Enable 0x01
|
|
||||||
RF_STATUS_UPDATE_ENABLE=0x00
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Timeout value in milliseconds to send response for Felica command received
|
|
||||||
NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000
|
|
||||||
###############################################################################
|
|
||||||
# Vendor Specific Proprietary Protocol & Discovery Configuration
|
|
||||||
# Set to 0xFF if unsupported
|
|
||||||
# byte[0] NCI_PROTOCOL_18092_ACTIVE
|
|
||||||
# byte[1] NCI_PROTOCOL_B_PRIME
|
|
||||||
# byte[2] NCI_PROTOCOL_DUAL
|
|
||||||
# byte[3] NCI_PROTOCOL_15693
|
|
||||||
# byte[4] NCI_PROTOCOL_KOVIO
|
|
||||||
# byte[5] NCI_PROTOCOL_MIFARE
|
|
||||||
# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
|
|
||||||
# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
|
|
||||||
# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
|
|
||||||
NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#White list of Hosts
|
|
||||||
#This values will be the Hosts(NFCEEs) in the HCI Network.
|
|
||||||
DEVICE_HOST_WHITE_LIST={02}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
#OffHost UICC route location for MultiSE
|
|
||||||
#UICC1 = 02
|
|
||||||
#UICC2 = 03
|
|
||||||
OFFHOST_ROUTE_UICC={02}
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1.
|
|
||||||
# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
|
|
||||||
# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
|
|
||||||
# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
|
|
||||||
PRESENCE_CHECK_ALGORITHM=2
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Extended APDU length for ISO_DEP
|
|
||||||
ISO_DEP_MAX_TRANSCEIVE=0xFEFF
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Enable/Disable mifare desfire CE prio feature
|
|
||||||
# Disable 0x00
|
|
||||||
# Enable 0x01
|
|
||||||
NXP_MIFARE_DESFIRE_DISABLE=0x00
|
|
||||||
@ -49,10 +49,6 @@ PRODUCT_PACKAGES += \
|
|||||||
PRODUCT_PACKAGES += \
|
PRODUCT_PACKAGES += \
|
||||||
android.hardware.nfc-service.nxp
|
android.hardware.nfc-service.nxp
|
||||||
|
|
||||||
PRODUCT_COPY_FILES += \
|
|
||||||
$(LOCAL_PATH)/configs/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf \
|
|
||||||
$(LOCAL_PATH)/configs/nfc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf
|
|
||||||
|
|
||||||
PRODUCT_COPY_FILES += \
|
PRODUCT_COPY_FILES += \
|
||||||
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/sku_sweet/android.hardware.nfc.ese.xml \
|
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/sku_sweet/android.hardware.nfc.ese.xml \
|
||||||
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/sku_sweet/android.hardware.nfc.hcef.xml \
|
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/sku_sweet/android.hardware.nfc.hcef.xml \
|
||||||
|
|||||||
@ -333,6 +333,8 @@ vendor/firmware/a630_sqe.fw
|
|||||||
-vendor/lib64/hw/consumerir.default.so:vendor/lib64/hw/consumerir.sm6150.so
|
-vendor/lib64/hw/consumerir.default.so:vendor/lib64/hw/consumerir.sm6150.so
|
||||||
|
|
||||||
# NFC
|
# NFC
|
||||||
|
vendor/etc/libnfc-nci.conf
|
||||||
|
vendor/etc/libnfc-nxp.conf
|
||||||
-vendor/lib/libpn553_fw.so
|
-vendor/lib/libpn553_fw.so
|
||||||
|
|
||||||
# Sensors
|
# Sensors
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user