donjohanliebert/device_xiaomi_sweet
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

sweet: overlay: Configure RefreshRate brightness thresholds

Browse Source 
The display uses different gamma curves for different refresh rates.
It's hard for panel vendor to tune the curves to have exact same brightness
for different refresh rate (lazy). To avoid flicker at darker environment,
set threshold for 120Hz, so 120Hz will be default in such conditions.

- values kanged from redfin, it works for our panel fine

Change-Id: Ie2042aa5d7b114c006841e1cd86c3257653242be
This commit is contained in:
althafvly 2021-11-16 12:08:22 +05:30 committed by basamaryan
parent 96e11b160f
commit 778a6b6ccd
No known key found for this signature in database
GPG Key ID: 707BA6C82329E8F9
1 changed files with 22 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
overlay/frameworks/base/core/res/res/values/config.xml
View File

@ -326,6 +326,28 @@
<item>21</item>
</integer-array>
<!-- The display uses different gamma curves for different refresh rates. It's hard for panel
vendor to tune the curves to have exact same brightness for different refresh rate. So
flicker could be observed at switch time. The issue is worse at the gamma lower end.
In addition, human eyes are more sensitive to the flicker at darker environment.
To prevent flicker, we only support higher refresh rates if the display brightness is above
a threshold. And the darker environment could have higher threshold.
For example, no higher refresh rate if
display brightness <= disp0 && ambient brightness <= amb0
|| display brightness <= disp1 && ambient brightness <= amb1 -->
<integer-array name="config_brightnessThresholdsOfPeakRefreshRate">
<item>10</item> <!-- 33% UI brightness -->
<item>14</item> <!-- 40% UI brightness -->
</integer-array>
<integer-array name="config_ambientThresholdsOfPeakRefreshRate">
<item>-1</item>
<item>20</item>
</integer-array>
<!-- Default refresh rate in the zone defined by brightness and ambient thresholds.
If non-positive, then the refresh rate is unchanged even if thresholds are configured. -->
<integer name="config_defaultRefreshRateInZone">120</integer>
<!-- Vibrator pattern for feedback about touching a virtual key -->
<integer-array name="config_virtualKeyVibePattern">
<item>0</item>