From 40511a2fb841f9832871409b8773aa0b659c7087 Mon Sep 17 00:00:00 2001 From: basamaryan Date: Sun, 24 Mar 2024 04:27:10 -0400 Subject: [PATCH] sweet: Move NFC configs to vendor Change-Id: I6295cc83b0a4568f5ba111cdf40c6b0eb13a2955 --- proprietary/vendor/etc/libnfc-nci.conf | 103 +++++ proprietary/vendor/etc/libnfc-nxp.conf | 568 +++++++++++++++++++++++++ sweet-vendor.mk | 2 + 3 files changed, 673 insertions(+) create mode 100644 proprietary/vendor/etc/libnfc-nci.conf create mode 100644 proprietary/vendor/etc/libnfc-nxp.conf diff --git a/proprietary/vendor/etc/libnfc-nci.conf b/proprietary/vendor/etc/libnfc-nci.conf new file mode 100644 index 0000000..9765d79 --- /dev/null +++ b/proprietary/vendor/etc/libnfc-nci.conf @@ -0,0 +1,103 @@ +###################### Start of libnfc-common.conf ####################### + +############################################################################### +# Application options +APPL_TRACE_LEVEL=0xFF +PROTOCOL_TRACE_LEVEL=0xFFFFFFFF + +NFC_DEBUG_ENABLED=0x01 + +############################################################################### +# File used for NFA storage +NFA_STORAGE="/data/nfc" + +############################################################################### +# Force UICC to only listen to the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F +UICC_LISTEN_TECH_MASK=0x07 + +############################################################################### +# Configure the default Destination Gate used by HCI (the default is 4, which +# is the ETSI loopback gate. +NFA_HCI_DEFAULT_DEST_GATE=0xF0 + +############################################################################### +# Forcing HOST to listen for a selected protocol +# 0x00 : Disable Host Listen +# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A +# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B +# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F +# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F +HOST_LISTEN_TECH_MASK=0x07 + +############################################################################### +# Enabling/Disabling Forward functionality +# Disable 0x00 +# Enable 0x01 +NXP_FWD_FUNCTIONALITY_ENABLE=0x01 + +############################################################################### +# AID for Empty Select command +# If specified, this AID will be substituted when an Empty SELECT command is +# detected. The first byte is the length of the AID. Maximum length is 16. +AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} + +############################################################################### +# When screen is turned off, specify the desired power state of the controller. +# 0: power-off-sleep state; DEFAULT +# 1: full-power state +# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) +SCREEN_OFF_POWER_STATE=1 + +############################################################################### +# Default poll duration (in ms) +# The defualt is 500ms if not set (see nfc_target.h) +#NFA_DM_DISC_DURATION_POLL=333 + +############################################################################### +# Force tag polling for the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | +# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | +# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | +# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE. +# +# Notable bits: +# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ +# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ +# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ +# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ +# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ +# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */ +# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */ +POLLING_TECH_MASK=0xEF + +############################################################################### +# Force P2P to only listen for the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | +# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE +# +# Notable bits: +# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ +# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ +# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */ +# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */ +P2P_LISTEN_TECH_MASK=0xC5 + +PRESERVE_STORAGE=0x01 + +############################################################################### +# Deactivate notification wait time out in seconds used in ETSI Reader mode +# 0 - Infinite wait +NFA_DM_DISC_NTF_TIMEOUT=0 + +############################################################################### +# AID_MATCHING constants +# AID_MATCHING_EXACT_ONLY 0x00 +# AID_MATCHING_EXACT_OR_PREFIX 0x01 +# AID_MATCHING_PREFIX_ONLY 0x02 +AID_MATCHING_MODE=0x01 + +############################################################################### diff --git a/proprietary/vendor/etc/libnfc-nxp.conf b/proprietary/vendor/etc/libnfc-nxp.conf new file mode 100644 index 0000000..bbf57cd --- /dev/null +++ b/proprietary/vendor/etc/libnfc-nxp.conf @@ -0,0 +1,568 @@ +#============================================================================ +# File Name: libnfc-nxp.conf +# +# Description: +# NFC configuration management file +# +# Modification History: +# Revision 1.0 2017/01/04 20:50:20 xiaohua.wang@xiaomi.com +# Initial draft version for Xiaomi C1 P2 board +# +# Revision 1.1 2017/03/01 16:32:09 xiaohua.wang@xiaomi.com +# Upgrade NFCC firmware version to 11.1.E +# +# Revision 1.2 2017/06/30 23:45:41 xiaohua.wang@xiaomi.com +# Improved notification management of received NCI Mode Set +# +# Revision 1.3 firmware version to 11.1.13/14 +# Kevin.hu@nxp.com 2017/09/05 16:06:41 +#============================================================================= + +# FW_VERSION=ALMSL 11.1.13/14 +# DEVICE_MANUFACTURER=Xiaomi +# DEVICE_MODEL=E1 + +# This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn5x) +# and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn5x) + +############################################################################### +# Application options +# Logging Levels +# NXPLOG_DEFAULT_LOGLEVEL 0x01 +# ANDROID_LOG_DEBUG 0x03 +# ANDROID_LOG_WARN 0x02 +# ANDROID_LOG_ERROR 0x01 +# ANDROID_LOG_SILENT 0x00 +# +NXPLOG_EXTNS_LOGLEVEL=0x03 +NXPLOG_NCIHAL_LOGLEVEL=0x03 +NXPLOG_NCIX_LOGLEVEL=0x03 +NXPLOG_NCIR_LOGLEVEL=0x03 +NXPLOG_FWDNLD_LOGLEVEL=0x03 +NXPLOG_TML_LOGLEVEL=0x03 + +############################################################################### +# Nfc Device Node name +NXP_NFC_DEV_NODE="/dev/nq-nci" + +############################################################################### +# Extension for Mifare reader enable +MIFARE_READER_ENABLE=0x01 + +############################################################################### +# Vzw Feature enable +VZW_FEATURE_ENABLE=0x01 + +############################################################################### +# File name for Firmware +NXP_FW_NAME="libpn553_fw.so" + +############################################################################### +# System clock source selection configuration +#define CLK_SRC_XTAL 1 +#define CLK_SRC_PLL 2 + +NXP_SYS_CLK_SRC_SEL=0x02 + +############################################################################### +# System clock frequency selection configuration +#define CLK_FREQ_13MHZ 1 +#define CLK_FREQ_19_2MHZ 2 +#define CLK_FREQ_24MHZ 3 +#define CLK_FREQ_26MHZ 4 +#define CLK_FREQ_32MHZ 5 +#define CLK_FREQ_38_4MHZ 6 +#define CLK_FREQ_52MHZ 7 +NXP_SYS_CLK_FREQ_SEL=0x02 + +############################################################################### +# The timeout value to be used for clock request acknowledgment +# min value = 0x01 to max = 0x06 + +NXP_SYS_CLOCK_TO_CFG=0x06 + +############################################################################### +# NXP proprietary settings +NXP_ACT_PROP_EXTN={2F, 02, 00} + +############################################################################### + +############################################################################### +# Standby enable settings +NXP_CORE_STANDBY={2F, 00, 01, 01} + +############################################################################### +# NXP TVDD configurations settings +# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, +# out of them only one can be configured at a time. +NXP_EXT_TVDD_CFG=0x01 + +############################################################################### +#config1:SLALM, 3.6V for both RM and CM +NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, 01, 31, 00, 00, 00, 10, 00, 10, 0C} + +############################################################################### +#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, +# monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms +NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, BA, 1E, 15, 00, D0, 0C} + +#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC, +# DCDCWaitTime=4.2ms +NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 40, 0A} + +NXP_RF_CONF_BLK_1={ + 20, 02, E7, 1B, + A0, 0D, 06, 06, 37, 08, 76, 00, 00, + A0, 0D, 03, 24, 03, 7E, + A0, 0D, 06, 02, 35, 00, 3E, 00, 00, + A0, 0D, 06, 04, 35, 2D, 02, 70, 02, + A0, 0D, 06, C2, 35, 00, 3E, 00, 03, + A0, 0D, 06, 04, 42, F8, 40, FF, FF, + A0, 0D, 04, 32, 42, F8, 40, + A0, 0D, 04, 46, 42, 68, 40, + A0, 0D, 04, 56, 42, 78, 40, + A0, 0D, 04, 5C, 42, 80, 40, + A0, 0D, 04, CA, 42, 68, 40, + A0, 0D, 06, 06, 42, 00, 02, F8, F8, + A0, 0D, 06, 32, 4A, 53, 07, 00, 1B, + A0, 0D, 06, 46, 4A, 33, 07, 00, 07, + A0, 0D, 06, 56, 4A, 43, 07, 00, 07, + A0, 0D, 06, 5C, 4A, 11, 07, 01, 07, + A0, 0D, 06, 34, 44, 66, 0A, 00, 00, + A0, 0D, 06, 48, 44, 65, 0A, 00, 00, + A0, 0D, 06, 58, 44, 55, 08, 00, 00, + A0, 0D, 06, 5E, 44, 55, 08, 00, 00, + A0, 0D, 06, CA, 44, 65, 0A, 00, 00, + A0, 0D, 06, 06, 44, 04, 04, C4, 00, + A0, 0D, 06, 34, 2D, DC, 20, 04, 00, + A0, 0D, 06, 48, 2D, 15, 34, 1F, 01, + A0, 0D, 06, 58, 2D, 0D, 48, 0C, 01, + A0, 0D, 06, 5E, 2D, 0D, 5A, 0C, 01, + A0, 0D, 06, CA, 2D, 15, 34, 1F, 01 +} + +# Enable DLMA +NXP_RF_CONF_BLK_2={ + 20, 02, D6, 01, A0, 34, D2, 23, 04, 18, 47, 40, 00, 00, 40, 00, 49, 00, 40, 00, 6F, 00, 40, 00, B3, 00, 40, 00, 13, 01, 40, 00, A5, 01, 40, 00, 5E, 02, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00, 00, 00, 00, 00, 47, 00, 00, 40, 00, 49, 00, 40, 00, 6F, 00, 40, 00, B3, 00, 40, 00, 13, 01, 40, 00, A5, 01, 40, 00, 5E, 02, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00 +} + +# Disable DPC +NXP_RF_CONF_BLK_3={ + 20, 02, 5B, 01, A0, 0B, 57, 11, 11, 90, 78, 0F, 4E, 00, 3D, 95, 00, 00, 3D, 9F, 00, 00, 50, 9F, 00, 00, 59, 9F, 00, 00, 5A, 9F, 00, 00, 64, 9F, 00, 00, 65, 9F, 00, 00, 6E, 9F, 00, 00, 72, 9F, 00, 00, 79, 9F, 00, 00, 7B, 9F, 00, 00, 84, 9F, 00, 00, 86, 9F, 00, 00, 8F, 9F, 00, 00, 91, 9F, 00, 00, 9A, 9F, 00, 00, A1, 9F, 00, 00, A7, 9F, 00, 00, B0, 1F, 00, 00, B9, 1F, 00, 00 +} + +# CE detector/phase +NXP_RF_CONF_BLK_4={ + 20, 02, 21, 04, + A0, 38, 04, 14, 0B, 0B, 00, + A0, 3A, 08, 1E, 00, 1E, 00, 1E, 00, 1E, 00, + A0, 0D, 06, 06, 16, 0E, 00, 1F, 00, + A0, B1, 02, BB, 08 +} +############################################################################### +# Set configuration optimization decision setting +# Enable = 0x01 +# Disable = 0x00 +NXP_SET_CONFIG_ALWAYS=0x01 + +############################################################################### +# Set configuration optimization decision setting +# Enable = 0x01 +# Disable = 0x00 +NXP_RF_UPDATE_REQ=0x01 + +############################################################################### +# Core configuration extensions +# A009 - Time-out before standby +# A0EC - Disable/Enable SWP1 interface +# A0ED - Disable/Enable SWP2 interface +# A05E - Send RID automatically in Jewel Reader mode +# A012 - NFCEE interface 2 configuration +# A040 - Low Power Card Detector Enable +# A041 - Low Power Card Detector Threshold +# A042 - Low Power Card Detector Sampling +# A043 - Low Power Card Detector Hybrid +# A0D5 - SWP/DWP desired baudrate +# A0D8 - Configure the number of Sliding Windows used on DWP +# A0DD - Retry on SWP2 interface +# A0F2 - SVDD_PWR_REQ enable +# A09F - Add ON/OFF guard time for SVDD power management(Step value ~1mSec) +# A096 - Notify all AIDs +# A037 - SE DWP system configuration +NXP_CORE_CONF_EXTN={20, 02, 6B, 14, + A0, 09, 02, 90, 01, + A0, EC, 01, 01, + A0, ED, 01, 03, + A0, 5E, 01, 01, + A0, 12, 01, 02, + A0, 40, 01, 01, + A0, 41, 01, 05, + A0, 43, 01, 04, + A0, 46, 02, BA, 27, + A0, 47, 02, BA, 27, + A0, 81, 01, 01, + A0, D5, 01, 0A, + A0, D8, 01, 02, + A0, DD, 01, 2D, + A0, F2, 01, 01, + A0, 9F, 02, 08, 08, + A0, 96, 01, 01, + A0, 37, 01, 35, + A0, 3F, 01, 01, + A0, 29, 17, 19, 07, 40, 1C, 00, 02, 40, 1C, 00, 02, 00, 41, F4, F6, 00, 41, F4, F6, 38, 70, 00, 00, 00 + } + +############################################################################### +# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit +# NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01} +# NXP_CORE_RF_FIELD={ 2F, 32, 01, 01} +############################################################################### +# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set +# to 0x00 +NXP_I2C_FRAGMENTATION_ENABLED=0x00 + +############################################################################### +# Core configuration settings +NXP_CORE_CONF={ 20, 02, 2E, 0E, + 28, 01, 00, + 21, 01, 00, + 30, 01, 08, + 31, 01, 03, + 32, 01, 60, + 38, 01, 01, + 33, 04, 01, 02, 03, 04, + 54, 01, 06, + 50, 01, 02, + 5B, 01, 00, + 80, 01, 01, + 81, 01, 01, + 82, 01, 0E, + 18, 01, 01 + } + +############################################################################### +# Mifare Classic Key settings +# NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, +# A0, 52, 06, D3, F7, D3, F7, D3, F7, +# A0, 53, 06, FF, FF, FF, FF, FF, FF, +# A0, 54, 06, 00, 00, 00, 00, 00, 00} + +############################################################################### +#Enable SWP full power mode when phone is power off +NXP_SWP_FULL_PWR_ON=0x00 + +############################################################################### +#### Select the CHIP #### +#PN547C2 0x01 +#PN65T 0x02 +#PN548AD 0x03 +#PN66T 0x04 +#PN551 0x05 +#PN67T 0x06 +#PN553 0x07 +#PN80T 0x08 +NXP_NFC_CHIP=0x07 + +############################################################################### +# CE when Screen state is locked +# This setting is for DEFAULT_AID_ROUTE, +# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE +# Disable 0x00 +# Enable 0x01 +NXP_CE_ROUTE_STRICT_DISABLE=0x01 + +############################################################################### +#Timeout in secs to get NFCEE Discover notification +NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 + +############################################################################### +NXP_DEFAULT_NFCEE_TIMEOUT=0x06 + +############################################################################### +# Timeout in secs +NXP_SWP_RD_START_TIMEOUT=0x0A + +############################################################################### +# Timeout in secs +NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 + +############################################################################### + +# Set the default AID route Location : +# This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x04 +DEFAULT_AID_ROUTE=0x02 + +############################################################################### +# Set the Mifare Desfire route Location : +# Configure the default NfcA/IsoDep techology and protocol route. Can be +# either a secure element (e.g. 0xF4) or the host (0x00) +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x04 +DEFAULT_ISODEP_ROUTE=0x02 + +############################################################################### +# Configure the single default SE to use. The default is to use the first +# SE that is detected by the stack. This value might be used when the phone +# supports multiple SE (e.g. 0xC0 and 0x80) but you want to force it to use +# one of them (e.g. 0xC0). +# host 0x00 +# eSE 0x01 +# UICC 0x02 +DEFAULT_OFFHOST_ROUTE=0x02 + +############################################################################### +# Configure the single default SE to use. The default is to use the first +# SE that is detected by the stack. This value might be used when the phone +# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use +# one of them (e.g. 0xF4). +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x04 +DEFAULT_TECH_ABF_ROUTE=0x02 + +############################################################################### +#Set the default Felica T3T System Code OffHost route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +DEFAULT_SYS_CODE_ROUTE=0x02 + +############################################################################### +#Set the default AID Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Off +# bit pos 4 = Screen Lock +DEFAULT_AID_PWR_STATE=0x1B + +############################################################################### +#Set the Mifare Desfire Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Off +# bit pos 4 = Screen Lock +DEFAULT_ISODEP_PWR_STATE=0x1B + +############################################################################### +#Set the Mifare CLT Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Off +# bit pos 4 = Screen Lock +DEFAULT_OFFHOST_PWR_STATE=0x1B + +############################################################################### +#Set Tech A,B,F Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Off +# bit pos 4 = Screen Lock +DEFAULT_TECH_ABF_PWR_STATE=0x1B + +############################################################################### +#Set the SYS_CODE Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen Off +# bit pos 4 = Screen Lock +DEFAULT_SYS_CODE_PWR_STATE=0x00 + +############################################################################### +# Configure the NFC Extras to open and use a static pipe. If the value is +# not set or set to 0, then the default is use a dynamic pipe based on a +# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value +# for each UICC (where F3="UICC0" and F4="UICC1") +OFF_HOST_ESE_PIPE_ID=0x19 +OFF_HOST_SIM_PIPE_ID=0x0A + +############################################################################### +# Bail out mode +# If set to 1, NFCC is using bail out mode for either Type A or Type B poll. +NFA_POLL_BAIL_OUT_MODE=0x00 + +############################################################################### +# AID Matching platform options +# AID_MATCHING_L 0x01 +# AID_MATCHING_K 0x02 +AID_MATCHING_PLATFORM=0x01 + +############################################################################### +#CHINA_TIANJIN_RF_SETTING +#Enable 0x01 +#Disable 0x00 +NXP_CHINA_TIANJIN_RF_ENABLED=0x01 + +############################################################################### +#SWP_SWITCH_TIMEOUT_SETTING +# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. +# Timeout in milliseconds, for example +# No Timeout 0x00 +# 10 millisecond timeout 0x0A +NXP_SWP_SWITCH_TIMEOUT=0x0A + +############################################################################### +# Loader service version +# NFC service checks for LS version 2.0 or 2.1 +# LS2.0 0x20 +# LS2.1 0x21 +# LS2.2 0x22 +# AT NFC service intialization +NXP_LOADER_SERVICE_VERSION=0x22 + +############################################################################### +#Timeout value in milliseconds for NFCC standby mode.The range is between 5000 +#msec to 20000 msec and zero is to disable. +NXP_NFCC_STANDBY_TIMEOUT=20000 + +############################################################################### +#Dynamic RSSI feature enable +# Disable 0x00 +# Enable 0x01 +NXP_AGC_DEBUG_ENABLE=0x00 + +############################################################################### +#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode +# For Technology routing to ESE Technology Mask = 4 +# For ISO-DEP Protocol routing to ESE Mask = 2 +# It can also take TECH|PROTO = 6 +# To ignore the delay set mask to = 0 +NXP_ESE_WIRED_PRT_MASK=0x00 + +############################################################################### +#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode +#For Technology routing to UICC Technology Mask = 4 +#For ISO-DEP Protocol routing to UICC set Mask = 2 +#For Select AID Routing to UICC set Mask = 1 +#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay +#set mask = 0 +NXP_UICC_WIRED_PRT_MASK=0x00 + +############################################################################### +#RF field true delay Wired Mode +# delay wired mode = 1 +# allow wired mode = 0 +NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 + +############################################################################### +# UICC mode supported +# Disable 0x00 +# Enable 0x01 +NXP_DUAL_UICC_ENABLE=0x00 +############################################################################### +#Config to allow adding aids +#NFC on/off is required after this config +#1 = enabling adding aid to NFCC routing table. +#0 = disabling adding aid to NFCC routing table. +NXP_ENABLE_ADD_AID=0x01 + +############################################################################### +# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal +# JCOP CP TIMEOUT +NXP_CP_TIMEOUT={00, 77} + +############################################################################### +# Enable/Disable checking default proto SE Id +# Disable 0x00 +# Enable 0x01 +NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 + +############################################################################### +#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE +#Enable/Disable block number checks for china transit use case +#Enable 0x01 +#Disable 0x00 +NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 + +############################################################################### +#Enable NXP NCI runtime parser library +#Enable 0x01 +#Disable 0x00 +NXP_NCI_PARSER_LIBRARY=0x00 + +############################################################################### +#This config will enable different level of Rf transaction debugs based on the +#following values provided. Decoded information will be printed in adb logcat +#Debug Mode Levels +#Disable Debug 0x00 +#L1 Debug 0x01 +#L2 Debug 0x02 +#L1 & L2 Debug 0x03 +#L1 & L2 & RSSI 0x04 +#L1 & L2 & Felica 0x05 +#NXP_CORE_PROP_SYSTEM_DEBUG=0x00 + +############################################################################### +# Enable/Disable Block Route feature. +# Block Route will restrict routing to first matched rule +# Block Route enable 0x01 +# Block Route disable 0x00 +AID_BLOCK_ROUTE=0x01 + +############################################################################### +# Enable or Disable RF_STATUS_UPDATE to EseHal module +# Disable 0x00 +# Enable 0x01 +RF_STATUS_UPDATE_ENABLE=0x00 + +############################################################################### +# Timeout value in milliseconds to send response for Felica command received +NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 +############################################################################### +# Vendor Specific Proprietary Protocol & Discovery Configuration +# Set to 0xFF if unsupported +# byte[0] NCI_PROTOCOL_18092_ACTIVE +# byte[1] NCI_PROTOCOL_B_PRIME +# byte[2] NCI_PROTOCOL_DUAL +# byte[3] NCI_PROTOCOL_15693 +# byte[4] NCI_PROTOCOL_KOVIO +# byte[5] NCI_PROTOCOL_MIFARE +# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO +# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME +# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME +NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF} + +############################################################################### +#White list of Hosts +#This values will be the Hosts(NFCEEs) in the HCI Network. +DEVICE_HOST_WHITE_LIST={02} + +############################################################################### +#OffHost UICC route location for MultiSE +#UICC1 = 02 +#UICC2 = 03 +OFFHOST_ROUTE_UICC={02} + +############################################################################### +# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1. +# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm +# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block +# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check +PRESENCE_CHECK_ALGORITHM=2 + +############################################################################### +# Extended APDU length for ISO_DEP +ISO_DEP_MAX_TRANSCEIVE=0xFEFF + +############################################################################### +# Enable/Disable mifare desfire CE prio feature +# Disable 0x00 +# Enable 0x01 +NXP_MIFARE_DESFIRE_DISABLE=0x00 + diff --git a/sweet-vendor.mk b/sweet-vendor.mk index 0cc4fc7..22809a5 100644 --- a/sweet-vendor.mk +++ b/sweet-vendor.mk @@ -53,6 +53,8 @@ PRODUCT_COPY_FILES += \ vendor/xiaomi/sweet/proprietary/vendor/etc/init/init.mi_thermald.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.mi_thermald.rc \ vendor/xiaomi/sweet/proprietary/vendor/etc/init/init.vendor.sensors.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.vendor.sensors.rc \ vendor/xiaomi/sweet/proprietary/vendor/etc/init/vendor.sensors.qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.sensors.qti.rc \ + vendor/xiaomi/sweet/proprietary/vendor/etc/libnfc-nci.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci.conf \ + vendor/xiaomi/sweet/proprietary/vendor/etc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf \ vendor/xiaomi/sweet/proprietary/vendor/etc/sensors/config/adux1050_0.json:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/config/adux1050_0.json \ vendor/xiaomi/sweet/proprietary/vendor/etc/sensors/config/ak991x_dri_0.json:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/config/ak991x_dri_0.json \ vendor/xiaomi/sweet/proprietary/vendor/etc/sensors/config/bu27030_0.json:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/config/bu27030_0.json \