lisa/android_device_xiaomi_sm8350-common
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
bdd5935f43
android_device_xiaomi_sm835.../audio/audio_policy_configuration.xml

438 lines
31 KiB
XML
Raw Normal View History

sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- Copyright (c) 2016-2019, The Linux Foundation. All rights reserved
Not a Contribution.
-->
<!-- Copyright (C) 2015 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
<!-- version section contains a “version” tag in the form “major.minor” e.g version=”1.0” -->
<!-- Global configuration Decalaration -->
sm6250-common: audio: Add mixer controls for call screen support Add mixer controls for proxy ports. Enable call screen mode support in audio_policy_config. Change-Id: I88eb274e8b88d089da930a786f9ea8085955ae3b
2020-05-26 05:59:20 -04:00
<globalConfiguration speaker_drc_enabled="true" call_screen_mode_supported="true"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<!-- Modules section:
There is one section per audio HW module present on the platform.
Each module section will contains two mandatory tags for audio HAL “halVersion” and “name”.
The module names are the same as in current .conf file:
“primary”, “A2DP”, “remote_submix”, “USB”
Each module will contain the following sections:
“devicePorts”: a list of device descriptors for all input and output devices accessible via this
module.
This contains both permanently attached devices and removable devices.
“mixPorts”: listing all output and input streams exposed by the audio HAL
“routes”: list of possible connections between input and output devices or between stream and
devices.
"route": is defined by an attribute:
-"type": <mux|mix> means all sources are mutual exclusive (mux) or can be mixed (mix)
-"sink": the sink involved in this route
-"sources": all the sources than can be connected to the sink via vis route
“attachedDevices”: permanently attached devices.
The attachedDevices section is a list of devices names. The names correspond to device names
defined in <devicePorts> section.
“defaultOutputDevice”: device to be used by default when no policy rule applies
-->
<modules>
<!-- Primary Audio HAL -->
<module name="primary" halVersion="2.0">
<attachedDevices>
<item>Earpiece</item>
<item>Speaker</item>
<item>Telephony Tx</item>
<item>Built-In Mic</item>
<item>Built-In Back Mic</item>
<item>FM Tuner</item>
<item>Telephony Rx</item>
</attachedDevices>
<defaultOutputDevice>Speaker</defaultOutputDevice>
<mixPorts>
sm6250-common: audio: correct routing order for voip output Routing primary output before voip_rx output will cause unexpected RX/TX path suddenly and unmuted voice stream during when system plays touch sound and switches path between handset and handsfree. Bug: 152292858 Test: manual test in VoIP Test: Regression test for VoIP(b/153276370) - pass Signed-off-by: Jasmine Cha <chajasmine@google.com> Change-Id: Ia60802ec887f0dfeaa0f93d151ba2f2c50e0d41d
2020-03-31 00:18:54 -04:00
<mixPort name="voip_rx" role="source"
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_VOIP_RX">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<mixPort name="primary output" role="source" flags="AUDIO_OUTPUT_FLAG_FAST|AUDIO_OUTPUT_FLAG_PRIMARY">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="raw" role="source"
sm6250-common: audio: remove raw flag for audio pop
2020-07-16 20:42:59 -04:00
flags="AUDIO_OUTPUT_FLAG_FAST">
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="deep_buffer" role="source"
flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="mmap_no_irq_out" role="source" flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_MMAP_NOIRQ">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="hifi_playback" role="source" />
<mixPort name="compress_passthrough" role="source"
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
<profile name="" format="dynamic"
samplingRates="dynamic" channelMasks="dynamic"/>
</mixPort>
<mixPort name="direct_pcm" role="source"
flags="AUDIO_OUTPUT_FLAG_DIRECT">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
<profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000,352800,384000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
<profile name="" format="AUDIO_FORMAT_PCM_24_BIT_PACKED"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000,352800,384000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
<profile name="" format="AUDIO_FORMAT_PCM_32_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000,352800,384000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
</mixPort>
<mixPort name="compressed_offload" role="source"
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
<profile name="" format="AUDIO_FORMAT_MP3"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_FLAC"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_ALAC"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
<profile name="" format="AUDIO_FORMAT_APE"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_LC"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_DTS"
samplingRates="32000,44100,48000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1"/>
<profile name="" format="AUDIO_FORMAT_DTS_HD"
samplingRates="32000,44100,48000,64000,88200,96000,128000,176400,192000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
<profile name="" format="AUDIO_FORMAT_WMA"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
<profile name="" format="AUDIO_FORMAT_WMA_PRO"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_LC"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_HE_V1"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_HE_V2"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
</mixPort>
<mixPort name="dsd_compress_passthrough" role="source"
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
<profile name="" format="AUDIO_FORMAT_DSD"
samplingRates="2822400,5644800"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
</mixPort>
<mixPort name="voice_tx" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="incall_music_uplink" role="source"
flags="AUDIO_OUTPUT_FLAG_INCALL_MUSIC">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,48000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
sm6250-common: audio: Remove 2 instance support for "primary input" As FM app no longer uses app loopback, 2 instances of "primary input" is not needed Change-Id: I7d5e941e916bdf221798ca89360e4751d4af322b
2019-01-22 04:28:10 -05:00
<mixPort name="primary input" role="sink">
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</mixPort>
sm6250-common: audio: Add fast input profile for the record concurrency If two recording apps both select the primary input with fast flag, second app will fail to start because the hal doesn't support two inputs with the same use case if input can't be reused since of the limit of primary input's max open count. Add the dedicated profile for “low-latency-record” to make the first input can be reused if possible. CRs-Fixed: 2550228 Change-Id: I233bd3eaf614b195df0a41402747f496d3a56b44
2019-10-27 23:12:18 -04:00
<mixPort name="fast input" role="sink"
flags="AUDIO_INPUT_FLAG_FAST">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</mixPort>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<mixPort name="voip_tx" role="sink"
flags="AUDIO_INPUT_FLAG_VOIP_TX">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</mixPort>
<mixPort name="usb_surround_sound" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4,AUDIO_CHANNEL_IN_5POINT1,AUDIO_CHANNEL_INDEX_MASK_6,AUDIO_CHANNEL_IN_7POINT1,AUDIO_CHANNEL_INDEX_MASK_8"/>
<profile name="" format="AUDIO_FORMAT_PCM_32_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000"
channelMasks="AUDIO_CHANNEL_IN_5POINT1,AUDIO_CHANNEL_INDEX_MASK_6,AUDIO_CHANNEL_IN_7POINT1,AUDIO_CHANNEL_INDEX_MASK_8"/>
<profile name="" format="AUDIO_FORMAT_PCM_FLOAT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000"
channelMasks="AUDIO_CHANNEL_IN_5POINT1,AUDIO_CHANNEL_INDEX_MASK_6,AUDIO_CHANNEL_IN_7POINT1,AUDIO_CHANNEL_INDEX_MASK_8"/>
</mixPort>
<mixPort name="record_24" role="sink" maxOpenCount="2" maxActiveCount="2">
<profile name="" format="AUDIO_FORMAT_PCM_24_BIT_PACKED"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,96000,192000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4"/>
<profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,96000,192000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4"/>
<profile name="" format="AUDIO_FORMAT_PCM_FLOAT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,96000,192000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4"/>
</mixPort>
<mixPort name="voice_rx" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
</mixPort>
<mixPort name="mmap_no_irq_in" role="sink" flags="AUDIO_INPUT_FLAG_MMAP_NOIRQ">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
</mixPort>
<mixPort name="hifi_input" role="sink" />
</mixPorts>
<devicePorts>
<!-- Output devices declaration, i.e. Sink DEVICE PORT -->
<devicePort tagName="Earpiece" type="AUDIO_DEVICE_OUT_EARPIECE" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</devicePort>
<devicePort tagName="Speaker" role="sink" type="AUDIO_DEVICE_OUT_SPEAKER" address="">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="Wired Headphones" type="AUDIO_DEVICE_OUT_WIRED_HEADPHONE" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="Line" type="AUDIO_DEVICE_OUT_LINE" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="BT SCO" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
</devicePort>
<devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
</devicePort>
<devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
</devicePort>
<devicePort tagName="Telephony Tx" type="AUDIO_DEVICE_OUT_TELEPHONY_TX" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="HDMI" type="AUDIO_DEVICE_OUT_AUX_DIGITAL" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,128000,176400,192000" channelMasks="dynamic"/>
</devicePort>
<devicePort tagName="Proxy" type="AUDIO_DEVICE_OUT_PROXY" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,128000,176400,192000" channelMasks="dynamic"/>
</devicePort>
<devicePort tagName="FM" type="AUDIO_DEVICE_OUT_FM" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="BT A2DP Out" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP" role="sink"
encodedFormats="AUDIO_FORMAT_SBC AUDIO_FORMAT_AAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_LDAC AUDIO_FORMAT_CELT AUDIO_FORMAT_APTX_ADAPTIVE AUDIO_FORMAT_APTX_TWSP">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="BT A2DP Headphones" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES" role="sink"
encodedFormats="AUDIO_FORMAT_SBC AUDIO_FORMAT_AAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_LDAC AUDIO_FORMAT_CELT AUDIO_FORMAT_APTX_ADAPTIVE AUDIO_FORMAT_APTX_TWSP">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="BT A2DP Speaker" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER" role="sink"
encodedFormats="AUDIO_FORMAT_SBC AUDIO_FORMAT_AAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_LDAC AUDIO_FORMAT_CELT AUDIO_FORMAT_APTX_ADAPTIVE AUDIO_FORMAT_APTX_TWSP">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="USB Device Out" type="AUDIO_DEVICE_OUT_USB_DEVICE" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100,48000,64000,88200,96000,128000,176400,192000" channelMasks="dynamic"/>
</devicePort>
<devicePort tagName="USB Headset Out" type="AUDIO_DEVICE_OUT_USB_HEADSET" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100,48000,64000,88200,96000,128000,176400,192000" channelMasks="dynamic"/>
</devicePort>
<!-- Input devices declaration, i.e. Source DEVICE PORT -->
<devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</devicePort>
<devicePort tagName="Built-In Back Mic" type="AUDIO_DEVICE_IN_BACK_MIC" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</devicePort>
<devicePort tagName="FM Tuner" type="AUDIO_DEVICE_IN_FM_TUNER" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
</devicePort>
<devicePort tagName="Wired Headset Mic" type="AUDIO_DEVICE_IN_WIRED_HEADSET" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</devicePort>
<devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</devicePort>
<devicePort tagName="Telephony Rx" type="AUDIO_DEVICE_IN_TELEPHONY_RX" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</devicePort>
<devicePort tagName="USB Device In" type="AUDIO_DEVICE_IN_USB_DEVICE" role="source">
</devicePort>
<devicePort tagName="USB Headset In" type="AUDIO_DEVICE_IN_USB_HEADSET" role="source">
</devicePort>
</devicePorts>
<!-- route declaration, i.e. list all available sources for a given sink -->
<routes>
<route type="mix" sink="Earpiece"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="Speaker"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="Wired Headset"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,dsd_compress_passthrough,voip_rx,mmap_no_irq_out"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="Wired Headphones"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,dsd_compress_passthrough,voip_rx,mmap_no_irq_out"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="Line"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,dsd_compress_passthrough,voip_rx,mmap_no_irq_out"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="HDMI"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,compress_passthrough,voip_rx"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="Proxy"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="FM"
sources="primary output"/>
<route type="mix" sink="BT SCO"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="BT SCO Headset"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="BT SCO Car Kit"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="USB Device Out"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="USB Headset Out"
sm6250-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I1f029d7df9a306f411598b0cffc536409cb2ae95
2018-01-28 18:55:25 -05:00
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="Telephony Tx"
sources="voice_tx,incall_music_uplink"/>
<route type="mix" sink="voice_rx"
sources="Telephony Rx"/>
<route type="mix" sink="primary input"
sm6250-common: configs: Remove TelePhony Rx from primary input Remove Telephony Rx to make in call record use case through different front end pcm device when sva enabled to solve concurrency capture issue Change-Id: I8a036423da689a4de9abe767a0b6a595b4e068f1
2020-06-02 05:08:34 -04:00
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,FM Tuner,USB Device In,USB Headset In"/>
sm6250-common: audio: Add fast input profile for the record concurrency If two recording apps both select the primary input with fast flag, second app will fail to start because the hal doesn't support two inputs with the same use case if input can't be reused since of the limit of primary input's max open count. Add the dedicated profile for “low-latency-record” to make the first input can be reused if possible. CRs-Fixed: 2550228 Change-Id: I233bd3eaf614b195df0a41402747f496d3a56b44
2019-10-27 23:12:18 -04:00
<route type="mix" sink="fast input"
sources="Built-In Mic,Built-In Back Mic,BT SCO Headset Mic,USB Device In,USB Headset In,Wired Headset Mic"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="voip_tx"
sources="Built-In Mic,Built-In Back Mic,BT SCO Headset Mic,USB Device In,USB Headset In,Wired Headset Mic"/>
<route type="mix" sink="usb_surround_sound"
sources="USB Device In,USB Headset In"/>
<route type="mix" sink="record_24"
sm6250-common: audio: add support of BT SCO mic for record_24 profile Usecase audio-record and audio-record-compress2 can both be mapped to record_24 profile, if both the usecases are active, when BT SCO mic is connected, due to no more available usecases in audio hal, check inputs for device can fail for other input profiles which support BT SCO mic. This makes BT SCO mic connection to be rejected and phone call can't route to BT. Add the support for record_24 profile, so existing input handle can be returned when checking inputs for BT SCO mic. Change-Id: I63046ec87e35774474e08762fb6aa6275318b2c8
2019-12-09 03:51:17 -05:00
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic"/>
sm6250-common: import audio policy configuration From https://source.codeaurora.org/quic/la/platform/hardware/qcom/audio/plain/configs/atoll/audio_policy_configuration.xml?h=LA.UM.8.9.r1-09600-SM6xx.0.
2020-07-16 15:16:34 -04:00
<route type="mix" sink="mmap_no_irq_in"
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,USB Device In,USB Headset In"/>
<route type="mix" sink="BT A2DP Out"
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
<route type="mix" sink="BT A2DP Headphones"
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
<route type="mix" sink="BT A2DP Speaker"
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
<route type="mix" sink="hifi_input" sources="USB Device In,USB Headset In" />
</routes>
</module>
<!-- A2DP Audio HAL -->
<module name="a2dp" halVersion="2.0">
<mixPorts>
<mixPort name="a2dp input" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
</mixPort>
</mixPorts>
<devicePorts>
<devicePort tagName="BT A2DP In" type="AUDIO_DEVICE_IN_BLUETOOTH_A2DP" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
</devicePort>
</devicePorts>
<routes>
<route type="mix" sink="a2dp input"
sources="BT A2DP In"/>
</routes>
</module>
<!-- Usb Audio HAL -->
<module name="usb" halVersion="2.0">
<mixPorts>
<mixPort name="usb_accessory output" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
</mixPorts>
<devicePorts>
<devicePort tagName="USB Host Out" type="AUDIO_DEVICE_OUT_USB_ACCESSORY" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
</devicePorts>
<routes>
<route type="mix" sink="USB Host Out"
sources="usb_accessory output"/>
</routes>
</module>
<!-- Remote Submix Audio HAL -->
<xi:include href="/vendor/etc/r_submix_audio_policy_configuration.xml"/>
</modules>
<!-- End of Modules section -->
<!-- Volume section -->
<xi:include href="/vendor/etc/audio_policy_volumes.xml"/>
<xi:include href="/vendor/etc/default_volume_tables.xml"/>
<!-- End of Volume section -->
</audioPolicyConfiguration>
Reference in New Issue Copy Permalink