From 1d0e2e3c5781394f0ea2a10053eeaecd0b6ad621 Mon Sep 17 00:00:00 2001 From: Cosmin Tanislav Date: Sun, 5 Sep 2021 12:28:47 +0300 Subject: [PATCH] sm8350-common: update wifi configs --- wifi/WCNSS_qcom_cfg.ini | 667 +++++++++---------------------- wifi/p2p_supplicant_overlay.conf | 3 +- 2 files changed, 187 insertions(+), 483 deletions(-) diff --git a/wifi/WCNSS_qcom_cfg.ini b/wifi/WCNSS_qcom_cfg.ini index 93f94c0..7954f62 100644 --- a/wifi/WCNSS_qcom_cfg.ini +++ b/wifi/WCNSS_qcom_cfg.ini @@ -1,143 +1,125 @@ # This file allows user to override the factory # defaults for the WLAN Driver -# Enable IMPS or not -gEnableImps=1 - -# Enable BMPS or not -gEnableBmps=1 - -# Phy Mode (auto, b, g, n, etc) -# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac -# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only -# 7 = 11b only 8 = 11ac only. +fw_timeout_crash=1 gDot11Mode=0 - -# Assigned MAC Addresses - This will be used until NV items are in place -# Each byte of MAC address is represented in Hex format as XX -Intf0MacAddress=000AF58989FF -Intf1MacAddress=000AF58989FE -Intf2MacAddress=000AF58989FD -Intf3MacAddress=000AF58989FC - -# UAPSD service interval for VO,VI, BE, BK traffic InfraUapsdVoSrvIntv=0 InfraUapsdViSrvIntv=0 InfraUapsdBeSrvIntv=0 InfraUapsdBkSrvIntv=0 - -# Flag to allow STA send AddTspec even when ACM is Off gAddTSWhenACMIsOff=1 - -# Flags to filter Mcast and Bcast RX packets. -# Value 0: No filtering, 1: Filter all Multicast. -# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast -McastBcastFilter=3 - -#Flag to enable HostARPOffload feature or not -hostArpOffload=1 - -#Flag to enable HostNSOffload feature or not -hostNSOffload=1 - -# 802.11n Protection flag -gEnableApProt=1 - -#Enable OBSS protection gEnableApOBSSProt=1 - -#Enable/Disable UAPSD for SoftAP -gEnableApUapsd=1 - -# Fixed Rate -gFixedRate=0 - -# Maximum Tx power -# gTxPowerCap=30 - -# Fragmentation Threshold -# gFragmentationThreshold=2346 - -# RTS threshold -RTSThreshold=2346 - -# Intra-BSS forward +RTSThreshold=1048576 gDisableIntraBssFwd=0 - -# WMM Enable/Disable -WmmIsEnabled=0 - -# 802.11d support g11dSupportEnabled=0 - -# 802.11h support -g11hSupportEnabled=1 - -# DFS Master Capability gEnableDFSMasterCap=1 - -# ESE Support and fast transition -EseEnabled=0 - -ImplicitQosIsEnabled=0 - gNeighborScanTimerPeriod=200 gNeighborLookupThreshold=76 gNeighborScanChannelMinTime=20 -gNeighborScanChannelMaxTime=30 -gMaxNeighborReqTries=3 - -# Legacy (non-ESE, non-802.11r) Fast Roaming Support -# To enable, set FastRoamEnabled=1 -# To disable, set FastRoamEnabled=0 FastRoamEnabled=1 - -# Check if the AP to which we are roaming is better than current AP in -# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will -# use this value as to how better the RSSI of the new/roamable AP should -# be for roaming RoamRssiDiff=5 - -# To enable, set gRoamIntraBand=1 (Roaming within band) -# To disable, set gRoamIntraBand=0 (Roaming across band) gRoamIntraBand=0 - -#Short Guard Interval Enable/disable -gShortGI20Mhz=1 -gShortGI40Mhz=1 - -#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled -gAPAutoShutOff=0 - -#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec -gWlanAutoShutdown = 0 - -# Not used. -gApAutoChannelSelection=0 - -#Preferred band (both or 2.4 only or 5 only) -BandCapability=0 - -#Channel Bonding gChannelBondingMode5GHz=1 +gEnableDFSChnlScan=1 +gAllowDFSChannelRoam=1 +gSetTxChainmask1x1=1 +gSetRxChainmask1x1=1 +gActiveMaxChannelTime=40 +gWlanMccToSccSwitchMode = 3 +gEnableTXSTBC=1 +gEnableTxBFeeSAP=1 +gEnableTxBFin20MHz=1 +gEnableTxSUBeamformer=1 +gRrmEnable=1 +gEnablefwprint=0 +gEnablefwlog=1 +gVhtAmpduLenExponent=7 +gVhtMpduLen=2 +isP2pDeviceAddrAdministrated=0 +gEnableVhtFor24GHzBand=1 +gEnableLpassSupport=1 +gCountryCodePriority=1 +gEnableMuBformee=1 +gEnableTDLSSupport=1 +gEnableTDLSImplicitTrigger=1 +gTDLSExternalControl=1 +gEnableTDLSOffChannel=1 -#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). -#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link -#is idle for last 10 seconds.) For both active and power save clients. +################ Datapath feature set Begin ################ +gBusBandwidthHighThreshold=2000 +gBusBandwidthMediumThreshold=500 +gBusBandwidthLowThreshold=150 +gBusBandwidthComputeInterval=100 +gVhtRxMCS=2 +gVhtTxMCS=2 +gEnable2x2=1 +gVhtRxMCS2x2=2 +gVhtTxMCS2x2=2 +gIPAConfig=0x7d +gIPADescSize=800 +dp_tx_ring_size=3072 +gReorderOffloadSupported=1 +gCEClassifyEnable=1 +rx_mode=20 +gEnableFastPath=1 +gEnableIpTcpUdpChecksumOffload=1 +TSOEnable=1 +GROEnable=1 +ght_mpdu_density=4 +gEnableFlowSteering=1 +ce_service_max_yield_time=500 +ce_service_max_rx_ind_flush=1 +maxMSDUsPerRxInd=8 +#gEnableNUDTracking=1 +dp_rx_fisa_enable=1 +dp_rx_flow_search_table_size=128 +rpsRxQueueCpuMapList=f3 +legacy_mode_csum_disable=1 -#Power save clients: DUT set TIM bit from 10th second onwards and till client -#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. +################ Datapath feature set End ################ -#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not -#success still we try on 11th second if not tries on 12th and so on till 15th -#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any -#case DUT will detect client got removed in (10+5) seconds. -#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. +adaptive_dwell_mode_enabled=1 +hostscan_adaptive_dwell_mode=1 +adapt_dwell_lpf_weight=80 +adapt_dwell_wifi_act_threshold=10 +enable_rtt_mac_randomization=1 +gEnableSNRMonitoring=1 +gWmiCreditCount=1 +acs_with_more_param=1 +AutoChannelSelectWeight=0x00fafafa +bcast_twt=1 +gRuntimePM=2 +gRuntimePMDelay=500 +gEnablePacketLog=0 +gfine_time_meas_cap=0x0030D +oem_6g_support_disable=0 +cfr_disable=7 -#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and -#it is period where we send NULL frame. -#gApLinkMonitorPeriod = 10 -#gGoLinkMonitorPeriod = 10 +active_max_channel_time_2g=80 +gActiveMaxChannelTime=60 +active_max_channel_time_6g=60 +gPassiveMaxChannelTime=110 +passive_max_channel_time_6g=60 + +#####################################Xiaomi ADD: START + +# WLM flags setting for ultralow level, bit9 for BMPS disabled +# bit 0: Avoid scan request from HLOS if setting +# bit 1: Skip DFS channel SCAN if setting +# bit 19/20: 1 to set PCIE in L1SS state(low power mode), 0 to set PCIE in L0 state(active mode) +wlm_latency_flags_ultralow=0x180003 + +#APF: Android Packet Filter +gActiveMcBcBpfMode=1 + +# Assoc failure timeout value +# Code default is 2000 +assoc_failure_timeout=5000 + +# Enable NUD tracking feature +# 0 - disable(default),1 - trigger disconnect, 2 - trigger roaming, +# 3 - trigger roaming, but if roam fails, disconnection +gEnableNUDTracking=3 #gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame #are succeed to send or not. Hence total effective detection time is @@ -145,377 +127,98 @@ gChannelBondingMode5GHz=1 # (gApLinkMonitorPeriod + gApKeepAlivePeriod) gGoKeepAlivePeriod = 20 gApKeepAlivePeriod = 20 - -#If set will start with active scan after driver load, otherwise will start with -#passive scan to find out the domain -gEnableBypass11d=1 - -#If set to 0, will not scan DFS channels -gEnableDFSChnlScan=1 - -# Enable DFS channel roam -# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE -gAllowDFSChannelRoam=1 - -gVhtChannelWidth=2 - -#Data Inactivity Timeout when in powersave (in ms) -gDataInactivityTimeout=200 - -# Set txchainmask and rxchainmask -# These parameters are used only if gEnable2x2 is 0 -# Valid values are 1,2 -# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. -# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. -gSetTxChainmask1x1=1 -gSetRxChainmask1x1=1 - -# Scan Timing Parameters -# gPassiveMaxChannelTime=110 -# gPassiveMinChannelTime=60 -gActiveMaxChannelTime=40 -gActiveMinChannelTime=20 - -#If set to 0, MCC is not allowed. -gEnableMCCMode=1 - -# MCC to SCC Switch mode: -# 0-Disable -# 1-Enable -# 2-Force SCC if same band, with SAP restart -# 3-Force SCC if same band, without SAP restart by sending (E)CSA -# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, -# without SAP restart by sending (E)CSA -gWlanMccToSccSwitchMode = 3 - -# 1=enable STBC; 0=disable STBC -gEnableRXSTBC=1 - -# 1=enable tx STBC; 0=disable -gEnableTXSTBC=1 - -# 1=enable rx LDPC; 0=disable -gEnableRXLDPC=1 - -#Enable/Disable Tx beamforming -gTxBFEnable=1 - -#Enable/Disable Tx beamformee in SAP mode -gEnableTxBFeeSAP=1 - -# Enable Tx beamforming in VHT20MHz -# Valid values are 0,1. If commented out, the default value is 0. -# 0=disable, 1=enable -gEnableTxBFin20MHz=1 - -#Enable/Disable SU Tx beamformer support. -gEnableTxSUBeamformer=1 - -gEnableFastRoamInConcurrency=1 - -#Maxium Channel time in msec -gMaxMediumTime = 6000 - -# 802.11K support -gRrmEnable=1 - -#Enable Power Save offload -gEnablePowerSaveOffload=1 - -#Enable firmware uart print -gEnablefwprint=0 - -# Firmware log mode -# Valid values are 0,1,2 -# 0=Disable, 1=WMI, 2=DIAG -gEnablefwlog=1 - -# Maximum Receive AMPDU size (VHT only. Valid values: -# 0->8k 1->16k 2->32k 3->64k 4->128k) -gVhtAmpduLenExponent=7 - -# Maximum MPDU length (VHT only. Valid values: -# 0->3895 octets, 1->7991 octets, 2->11454 octets) -gVhtMpduLen=2 - -# Maximum number of wow filters required -#gMaxWoWFilters=22 - -# WOW Enable/Disable. -# 0 - Disable both magic pattern match and pattern byte match. -# 1 - Enable magic pattern match on all interfaces. -# 2 - Enable pattern byte match on all interfaces. -# 3 - Enable both magic pattern and pattern byte match on all interfaces. -# Default value of gEnableWoW is 3. -# gEnableWoW=0 - -# Enable or Disable MCC Adaptive Scheduler at the FW -# 1=Enable (default), 0=Disable -gEnableMCCAdaptiveScheduler=1 - -#Enable or Disable p2p device address administered -isP2pDeviceAddrAdministrated=0 - -# Set Thermal Power limit -TxPower2g=10 -TxPower5g=10 -# Remove Overlap channel restriction -gEnableOverLapCh=0 - -#Enable VHT on 2.4Ghz -gEnableVhtFor24GHzBand=1 -# Configure channel Bonding in 2.4GHz -gChannelBondingMode24GHz=0 - -#Maximum number of offload peers supported -# gMaxOffloadPeers=2 - -# controlling the following offload patterns -# through ini parameter. Default value is 1 -# to disable set it to zero. ssdp = 0 -# Setup multicast pattern for mDNS 224.0.0.251, -# SSDP 239.255.255.250 and LLMNR 224.0.0.252 -ssdp=0 - -#Enable Memory Deep Sleep -gEnableMemDeepSleep=1 - -# Regulatory Setting; 0=STRICT; 1=CUSTOM -gRegulatoryChangeCountry=1 - -# RA filtering rate limit param, the current value would not -# help if the lifetime in RA is less than 3*60=3min. Then -# we need to change it, though it is uncommon. -# gRAFilterEnable=0 -gRArateLimitInterval=600 - -# Maximum number of concurrent connections -gMaxConcurrentActiveSessions=3 - -# Disable/Enable GreenAP -# 0 to disable, 1 to enable, default: 1 -gEnableGreenAp=0 - -# Radar PRI multiplier -gDFSradarMappingPriMultiplier=4 - -gPNOScanSupport=1 - -#Enable/Disable LPASS support -# 0 to disable, 1 to enable -gEnableLpassSupport=1 - -# Whether userspace country code setting shld have priority -gCountryCodePriority=1 - -# Enable(1)/Disable(0) SIFS burst -gEnableSifsBurst=1 - -# Enable or Disable Multi-user MIMO -# 1=Enable (default), 0=Disable -gEnableMuBformee=1 - -# Enable/Disable channel avoidance for SAP in SCC scenario -# 0 - disable -# 1 - enable -gSapSccChanAvoidance=0 - -# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode -gIbssTxSpEndInactivityTime=10 - -# Enable support for TDLS -# 0 - disable -# 1 - enable -gEnableTDLSSupport=1 - -# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall -# initiate TDLS Discovery towards a peer whenever setup criteria (throughput -# and RSSI) is met and then will initiate teardown when teardown criteria -# (idle packet count and RSSI) is met. -# 0 - disable -# 1 - enable -gEnableTDLSImplicitTrigger=1 - -# Enable TDLS External Control. That is, user space application has to -# first configure a peer MAC in wlan driver towards which TDLS is desired. -# Device will establish TDLS only towards those configured peers whenever -# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS -# when teardown criteria (idle packet count and RSSI) is met. However, -# device will accept TDLS connection if it is initiated from any other peer, -# even if that peer is not configured. -# 0 - disable -# 1 - enable -# For TDLS External Control, Implicit Trigger must also be enabled. -gTDLSExternalControl=1 - -# Enable support for TDLS off-channel operation -# 0 - disable -# 1 - enable -# TDLS off-channel operation will be invoked when there is only one -# TDLS connection. -gEnableTDLSOffChannel=1 - -# Enable or Disable Random MAC (Spoofing) -# 1=Enable (default), 0=Disable -gEnableMacAddrSpoof=1 - -################ Datapath feature set Begin ################ -# Bus bandwidth threshold values in terms of number of packets -gBusBandwidthHighThreshold=2000 -gBusBandwidthMediumThreshold=500 -gBusBandwidthLowThreshold=150 - -# Bus bandwidth compute timeout value in ms -gBusBandwidthComputeInterval=100 - -# VHT Tx/Rx MCS values -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gVhtRxMCS=2 -gVhtTxMCS=2 - -# VHT Tx/Rx MCS values for 2x2 -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gEnable2x2=1 -gVhtRxMCS2x2=2 -gVhtTxMCS2x2=2 - -#IPA config is a bit mask and following are the configurations. -#bit0 IPA Enable -#bit1 IPA PRE Filter enable -#bit2 IPv6 enable -#bit3 IPA Resource Manager (RM) enable -#bit4 IPA Clock scaling enable -#bit5 IPA uC ENABLE -#bit6 IPA uC STA ENABLE -#bit8 IPA Real Time Debugging -gIPAConfig=0x7d -gIPADescSize=800 - -# Enable/Disable RX full reorder offload -gReorderOffloadSupported=1 - -# Enable CE classification -# 1 - enable(default) 0 - disable -gCEClassifyEnable=1 - -# Enable Rx handling options -# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium) -rx_mode=5 - -# Enable(Tx) fastpath for data traffic. -# 1 - enable(default) 0 - disable -gEnableFastPath=1 - -# This flag enables IP, TCP and UDP checksum offload -# 1 - enable(default) 0 - disable -gEnableIpTcpUdpChecksumOffload=1 - -# Enable TCP Segmentation Offload -# 1 - enable 0 - disable -TSOEnable=1 - -# Enable Generic Receive Offload -# 1 - enable(default) 0 - disable -GROEnable=1 - -# Enable HT MPDU Density -# 4 for 2 micro sec -ght_mpdu_density=4 - -# Enable flow steering to enable multiple CEs for Rx flows. -# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. -# Parallel Rx paths. -# 1 - enable 0 - disable(default) -gEnableFlowSteering=1 - -# Time in microseconds after which a NAPI poll must yield -ce_service_max_yield_time=500 - -#Maximum number of HTT messages to be processed per NAPI poll -ce_service_max_rx_ind_flush=1 - -# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND -maxMSDUsPerRxInd=8 - -# Enable NUD tracking feature -# 1 - enable 0 - disable(default) -gEnableNUDTracking=1 - -# Enable PEER UNMAP CONF SUPPORT -# 1 - enable 0 - disable(default) -gEnablePeerUnmapConfSupport=1 - -################ Datapath feature set End ################ - -################ NAN feature set start ################### - -# Enable NAN discovery (NAN 1.0) -# 1 - enable 0 - disable(default) -gEnableNanSupport=1 -# Enable NAN Datapath -genable_nan_datapath=1 - -################ NAN feature set end ##################### - -adaptive_dwell_mode_enabled=1 - -hostscan_adaptive_dwell_mode=1 - -adapt_dwell_lpf_weight=80 - -adapt_dwell_wifi_act_threshold=10 - -MAWCEnabled=0 - -drop_bcn_on_chan_mismatch=0 -# Enable/Disable rtt sta mac randomization -enable_rtt_mac_randomization=1 - -#Enable/Disable SNR monitoring -gEnableSNRMonitoring=1 - -#Sets RSSI preference for 5GHz over 2.4GHz AP +#Enable Keep alive with non-zero period value +gStaKeepAlivePeriod = 30 + +# Enable ETSI SRD channels by Xiaomi. Qualcom default value is disable +# * BIT 0:- Enable/Disable SRD channels for SAP. +# * BIT 1:- Enable/Disable SRD channels for P2P-GO. +# * BIT 2:- Enable/Disable SRD channels for NAN. +# Code default value is 6. +etsi13_srd_chan_in_master_mode=7 + +#####Roaming +# Sets RSSI preference for 5GHz over 2.4GHz AP gSelect5GHzMargin=5 -#RSSI threshold offset for 2G to 5G roam -roam_bad_rssi_thresh_offset_2g=0 -#RSSI threshold for background roam -roam_bg_scan_bad_rssi_thresh=-76 -#Sends NULL frame to AP periodically in seconds to notify STA's existence -gStaKeepAlivePeriod=30 -gEnablePacketLog=1 -#Enable/Disable Modulated DTIM feature -gEnableModulatedDTIM=3 -#Set MaxLIModulate Dtim -gMaxLIModulatedDTIM=3 -#Sets dense roam RSSI Threshold diff -groam_dense_rssi_thresh_offset=5 -#traffic Threshold required for dense roam scan + +# Candidate AP minimum RSSI for beacon miss roam trigger +# Code default is -70 +candidate_min_rssi_for_beacon_miss=-83 + +# Dense traffic threshold in kBps +# Code default is 400 gtraffic_threshold=50 -gRoamBmissFirstBcnt=10 -gRoamBmissFinalBcnt=20 -#To Enable/Disable PER based Roaming in FW -gper_roam_enabled=3 -#ARP access category -arp_ac_category=0 -#Enable/Disable LPRx -gEnableLPRx=0 -gEnableSelfRecovery=1 -#Enable/Disable FT open feature + +#Idle Monitor Roaming: START +# Code default is flase to disable idle roaming +enable_idle_roam=1 +idle_roam_min_rssi=-65 +#Idle Monitor Roaming: END + +#enable/disable FT open feature +# Code default is 1 enable_ftopen=0 + +# Stop auto-creating twt session +twt_congestion_timeout=0 + +#VTS SAR test fail as sar version is not match +gEnableSARV1toSARV2=1 + +# This ini is used to give higher priority for 5g scc than dbs. +# It is bitmap per enum policy_mgr_con_mode. +# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system +# preference option, If 5G SCC needs higher priority than dbs, set it as 8. +g_prefer_5g_scc_to_dbs=8 + +# set modulated DTIM interval +gEnableModulatedDTIM=3 +gMaxLIModulatedDTIM=3 + +# Reduce the expiry time for avoid list and black list in drv. +avoid_list_expiry_time=3 +black_list_expiry_time=5 +# Improve threshold to move the Ap from avoid to blacklist +bad_bssid_counter_thresh=7 + +# Enable the sending of ICMP requests to the +# FW at an interval of 200 milliseconds +send_icmp_req_to_fw=200 + +# Enable SoftAP on indoor channel, but Xiaomi's patch in driver only +# allow this when STA was connected on the same indoor channel. +gindoor_channel_support=1 + #Enable max link speed gReportMaxLinkSpeed=2 -#Enable/Disable SAE support in Driver -sae_enabled=0 -# Enable/disable ETSI SRD channels in master mode PCL and ACS functionality -etsi13_srd_chan_in_master_mode=1 -# Set max time for active 2G channel scan -active_max_channel_time_2g=0 -# Enable/Disable emergency roaming during deauth/disassoc -enable_disconnect_roam_offload=1 -# Enable/Disable RTT feature -gEnableRTTSupport=0 + +#####################################Xiaomi ADD: END + + +# MIUI:ADD: +# Add for optimize download performance in noisy env. + +# used to specify AP OUIs. The station's EDCA should follow +# the APs' when connecting to those AP, even if the +# gEnableEdcaParams is set. +# Huawei OUI:ac:85:3d +gActionOUIDisableAggressiveEDCA=ac853d 00 01 +# Enable edca parameter +gEnableEdcaParams=1 +gEdcaVoCwmin=2 +gEdcaViCwmin=2 +gEdcaBkCwmin=2 +gEdcaBeCwmin=2 + +gEdcaVoCwmax=3 +gEdcaViCwmax=3 +gEdcaBkCwmax=3 +gEdcaBeCwmax=3 + +gEdcaVoAifs=2 +gEdcaViAifs=2 +gEdcaBkAifs=2 +gEdcaBeAifs=2 END diff --git a/wifi/p2p_supplicant_overlay.conf b/wifi/p2p_supplicant_overlay.conf index 4de5bc6..6c38a45 100644 --- a/wifi/p2p_supplicant_overlay.conf +++ b/wifi/p2p_supplicant_overlay.conf @@ -2,4 +2,5 @@ disable_scan_offload=1 p2p_no_group_iface=1 persistent_reconnect=1 bss_max_count=400 -p2p_go_intent=14 +p2p_go_he=1 +p2p_6ghz_disable=1