diff --git a/overlay-lineage/frameworks/base/packages/SystemUI/res/values-port/dimens.xml b/overlay-lineage/frameworks/base/packages/SystemUI/res/values-port/dimens.xml
deleted file mode 100644
index 0bdf1c9..0000000
--- a/overlay-lineage/frameworks/base/packages/SystemUI/res/values-port/dimens.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-     Copyright (C) 2021 The LineageOS Project
-     Licensed under the Apache License, Version 2.0 (the "License");
-     you may not use this file except in compliance with the License.
-     You may obtain a copy of the License at
-          http://www.apache.org/licenses/LICENSE-2.0
-     Unless required by applicable law or agreed to in writing, software
-     distributed under the License is distributed on an "AS IS" BASIS,
-     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-     See the License for the specific language governing permissions and
-     limitations under the License.
--->
-<resources>
-    <!-- The bottom margin of the keyguard security container -->
-    <dimen name="kg_security_container_min_bottom_margin">1106px</dimen>
-</resources>
diff --git a/overlay-lineage/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay-lineage/frameworks/base/packages/SystemUI/res/values/config.xml
deleted file mode 100644
index bbd06cf..0000000
--- a/overlay-lineage/frameworks/base/packages/SystemUI/res/values/config.xml
+++ /dev/null
@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-     Copyright (C) 2021 The LineageOS Project
-
-     Licensed under the Apache License, Version 2.0 (the "License");
-     you may not use this file except in compliance with the License.
-     You may obtain a copy of the License at
-          http://www.apache.org/licenses/LICENSE-2.0
-     Unless required by applicable law or agreed to in writing, software
-     distributed under the License is distributed on an "AS IS" BASIS,
-     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-     See the License for the specific language governing permissions and
-     limitations under the License.
--->
-<resources>
-    <!-- Color of the FOD view -->
-    <color name="config_fodColor">#ffffff</color>
-</resources>
diff --git a/overlay-lineage/packages/apps/Settings/res/values/config.xml b/overlay-lineage/packages/apps/Settings/res/values/config.xml
deleted file mode 100644
index 83cb3f8..0000000
--- a/overlay-lineage/packages/apps/Settings/res/values/config.xml
+++ /dev/null
@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-     Copyright (C) 2020 The LineageOS Project
-
-     Licensed under the Apache License, Version 2.0 (the "License");
-     you may not use this file except in compliance with the License.
-     You may obtain a copy of the License at
-          http://www.apache.org/licenses/LICENSE-2.0
-     Unless required by applicable law or agreed to in writing, software
-     distributed under the License is distributed on an "AS IS" BASIS,
-     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-     See the License for the specific language governing permissions and
-     limitations under the License.
--->
-
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-    <!-- Defines the location of the fingerprint sensor on the device
-         0 = back
-         1 = front
-         2 = left side
-         3 = right side
-    -->
-    <integer name="config_fingerprintSensorLocation">1</integer>
-
-    <!-- Screen off FOD -->
-    <bool name="config_supportScreenOffFod">true</bool>
-</resources>
diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
index 19a8656..fac69f8 100644
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -175,284 +175,6 @@
          and one pSIM) -->
     <integer name="config_num_physical_slots">2</integer>
 
-    <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
-    <bool name="config_intrusiveNotificationLed">true</bool>
-
-    <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
-         percent. The length of this array is assumed to be one greater than
-         config_ambientThresholdLevels. The brightening threshold is calculated as
-         lux * (1.0f + CONSTRAINT_VALUE). When the current lux is higher than this threshold,
-         the screen brightness is recalculated. See the config_ambientThresholdLevels
-         description for how the constraint value is chosen. -->
-    <array name="config_ambientBrighteningThresholds">
-        <item>5</item>
-        <item>5</item>
-        <item>10</item>
-        <item>30</item>
-        <item>100</item>
-        <item>400</item>
-        <item>600</item>
-        <item>1000</item>
-    </array>
-
-    <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
-         percent. The length of this array is assumed to be one greater than
-         config_ambientThresholdLevels. The darkening threshold is calculated as
-         lux * (1.0f - CONSTRAINT_VALUE). When the current lux is lower than this threshold,
-         the screen brightness is recalculated. See the config_ambientThresholdLevels
-         description for how the constraint value is chosen. -->
-    <array name="config_ambientDarkeningThresholds">
-        <item>800</item>
-        <item>800</item>
-        <item>800</item>
-        <item>800</item>
-        <item>800</item>
-        <item>500</item>
-        <item>500</item>
-        <item>500</item>
-    </array>
-
-    <!-- Array of ambient lux threshold values. This is used for determining hysteresis constraint
-         values by calculating the index to use for lookup and then setting the constraint value
-         to the corresponding value of the array. The new brightening hysteresis constraint value
-         is the n-th element of config_ambientBrighteningThresholds, and the new darkening
-         hysteresis constraint value is the n-th element of config_ambientDarkeningThresholds.
-         The (zero-based) index is calculated as follows: (MAX is the largest index of the array)
-         condition                       calculated index
-         value < level[0]                0
-         level[n] <= value < level[n+1]  n+1
-         level[MAX] <= value             MAX+1 -->
-    <array name="config_ambientThresholdLevels">
-        <item>2</item>
-        <item>10</item>
-        <item>30</item>
-        <item>100</item>
-        <item>800</item>
-        <item>2000</item>
-        <item>4000</item>
-    </array>
-
-    <!-- Array of desired screen brightness in nits corresponding to the lux values
-         in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
-         config_screenBrightnessMaximumNits, the display brightness is defined as the measured
-         brightness of an all-white image.
-
-         If this is defined then:
-            - config_autoBrightnessLcdBacklightValues should not be defined
-            - config_screenBrightnessNits must be defined
-            - config_screenBrightnessBacklight must be defined
-
-         This array should have size one greater than the size of the config_autoBrightnessLevels
-         array. The brightness values must be non-negative and non-decreasing. This must be
-         overridden in platform specific overlays -->
-    <array name="config_autoBrightnessDisplayValuesNits">
-        <item>5</item>
-        <item>5</item>
-        <item>5</item>
-        <item>5</item>
-        <item>15</item>
-        <item>24</item>
-        <item>37</item>
-        <item>47</item>
-        <item>61</item>
-        <item>76</item>
-        <item>83</item>
-        <item>83</item>
-        <item>83</item>
-        <item>87</item>
-        <item>93</item>
-        <item>107</item>
-        <item>117</item>
-        <item>124</item>
-        <item>133</item>
-        <item>166</item>
-        <item>182</item>
-        <item>270</item>
-        <item>315</item>
-        <item>373</item>
-        <item>442</item>
-        <item>455</item>
-    </array>
-
-    <!-- Array of output values for LCD backlight corresponding to the lux values
-         in the config_autoBrightnessLevels array.  This array should have size one greater
-         than the size of the config_autoBrightnessLevels array.
-         The brightness values must be between 0 and 255 and be non-decreasing.
-         This must be overridden in platform specific overlays -->
-    <array name="config_autoBrightnessLcdBacklightValues">
-        <item>3</item>
-        <item>3</item>
-        <item>3</item>
-        <item>3</item>
-        <item>8</item>
-        <item>13</item>
-        <item>20</item>
-        <item>25</item>
-        <item>33</item>
-        <item>41</item>
-        <item>45</item>
-        <item>45</item>
-        <item>45</item>
-        <item>47</item>
-        <item>50</item>
-        <item>58</item>
-        <item>63</item>
-        <item>67</item>
-        <item>72</item>
-        <item>90</item>
-        <item>99</item>
-        <item>150</item>
-        <item>175</item>
-        <item>208</item>
-        <item>248</item>
-        <item>255</item>
-    </array>
-
-    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
-         The N entries of this array define N + 1 control points as follows:
-         (1-based arrays)
-         Point 1:            (0, value[1]):             lux <= 0
-         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
-         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
-         ...
-         Point N+1: (level[N], value[N+1]):  level[N] < lux
-         The control points must be strictly increasing.  Each control point
-         corresponds to an entry in the brightness backlight values arrays.
-         For example, if lux == level[1] (first element of the levels array)
-         then the brightness will be determined by value[2] (second element
-         of the brightness values array).
-         Spline interpolation is used to determine the auto-brightness
-         backlight values for lux levels between these control points.
-         Must be overridden in platform specific overlays -->
-    <array name="config_autoBrightnessLevels">
-        <item>1</item>
-        <item>2</item>
-        <item>4</item>
-        <item>5</item>
-        <item>8</item>
-        <item>13</item>
-        <item>17</item>
-        <item>21</item>
-        <item>26</item>
-        <item>30</item>
-        <item>34</item>
-        <item>39</item>
-        <item>60</item>
-        <item>140</item>
-        <item>310</item>
-        <item>400</item>
-        <item>500</item>
-        <item>600</item>
-        <item>1000</item>
-        <item>1200</item>
-        <item>1500</item>
-        <item>2100</item>
-        <item>3000</item>
-        <item>3500</item>
-        <item>4000</item>
-    </array>
-
-    <!-- An array describing the screen's backlight values corresponding to the brightness
-         values in the config_screenBrightnessNits array. -->
-    <array name="config_screenBrightnessBacklight">
-        <item>@null</item>
-        <item>1</item>
-        <item>10</item>
-        <item>15</item>
-        <item>30</item>
-        <item>45</item>
-        <item>60</item>
-        <item>75</item>
-        <item>90</item>
-        <item>105</item>
-        <item>120</item>
-        <item>135</item>
-        <item>150</item>
-        <item>165</item>
-        <item>180</item>
-        <item>195</item>
-        <item>210</item>
-        <item>225</item>
-        <item>240</item>
-        <item>255</item>
-    </array>
-
-    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
-         values in the config_screenBrightnessBacklight array.  On OLED displays these  values
-         should be measured with an all white image while the display is in the fully on state.
-         Note that this value should *not* reflect the maximum brightness value for any high
-         brightness modes but only the maximum brightness value obtainable in a sustainable manner.
-         This array should be equal in size to config_screenBrightnessBacklight -->
-    <array name="config_screenBrightnessNits">
-        <item>@null</item>
-        <item>4</item>
-        <item>22</item>
-        <item>30</item>
-        <item>68</item>
-        <item>95</item>
-        <item>133</item>
-        <item>165</item>
-        <item>192</item>
-        <item>218</item>
-        <item>255</item>
-        <item>290</item>
-        <item>326</item>
-        <item>352</item>
-        <item>384</item>
-        <item>399</item>
-        <item>422</item>
-        <item>432</item>
-        <item>442</item>
-        <item>455</item>
-    </array>
-
-    <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
-         percent. The length of this array is assumed to be one greater than
-         config_screenThresholdLevels. The brightening threshold is calculated as
-         screenBrightness * (1.0f + CONSTRAINT_VALUE). When the new screen brightness is higher
-         than this threshold, it is applied. See the config_screenThresholdLevels description for
-         how the constraint value is chosen. -->
-    <array name="config_screenBrighteningThresholds">
-        <item>@null</item>
-    </array>
-
-   <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
-         percent. The length of this array is assumed to be one greater than
-         config_screenThresholdLevels. The darkening threshold is calculated as
-         screenBrightness * (1.0f - CONSTRAINT_VALUE). When the new screen brightness is lower than
-         this threshold, it is applied. See the config_screenThresholdLevels description for how
-         the constraint value is chosen. -->
-    <array name="config_screenDarkeningThresholds">
-        <item>@null</item>
-    </array>
-
-    <!-- Array of screen brightness threshold values. This is used for determining hysteresis
-         constraint values by calculating the index to use for lookup and then setting the
-         constraint value to the corresponding value of the array. The new brightening hysteresis
-         constraint value is the n-th element of config_screenBrighteningThresholds, and the new
-         darkening hysteresis constraint value is the n-th element of
-         config_screenDarkeningThresholds.
-
-         The (zero-based) index is calculated as follows: (MAX is the largest index of the array)
-         condition                       calculated index
-         value < level[0]                0
-         level[n] <= value < level[n+1]  n+1
-         level[MAX] <= value             MAX+1 -->
-    <array name="config_screenThresholdLevels">
-    </array>
-
-    <!-- The maximum range of gamma adjustment possible using the screen
-         auto-brightness adjustment setting. -->
-    <fraction name="config_autoBrightnessAdjustmentMaxGamma">100%</fraction>
-
-    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
-         for debouncing the light sensor.  Different constants are used to debounce the light sensor
-         when adapting to brighter or darker environments.  This parameter controls how quickly
-         brightness changes occur in response to an observed change in light level that exceeds the
-         hysteresis threshold. -->
-    <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
-    <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
-
     <!-- Fast brightness animation ramp rate in brightness units per second-->
     <integer name="config_brightness_ramp_rate_fast">308</integer>