From cfe2ce333c10b1e4b65ab423b254f9bb634692ed Mon Sep 17 00:00:00 2001 From: Arian Date: Thu, 3 Mar 2022 12:28:12 +0100 Subject: [PATCH] sm8350-common: Decommonize NFC configs Change-Id: I49d0bb5fc61d40eec3d218f5cebabea0217fc621 --- common.mk | 5 - nfc/libnfc-nci.conf | 117 --------- nfc/libnfc-nxp.conf | 543 ----------------------------------------- nfc/libnfc-nxp_RF.conf | 226 ----------------- proprietary-files.txt | 2 - 5 files changed, 893 deletions(-) delete mode 100644 nfc/libnfc-nci.conf delete mode 100644 nfc/libnfc-nxp.conf delete mode 100644 nfc/libnfc-nxp_RF.conf diff --git a/common.mk b/common.mk index d139b78..414e172 100644 --- a/common.mk +++ b/common.mk @@ -322,11 +322,6 @@ PRODUCT_PACKAGES += \ ls_nq_client \ se_nq_extn_client -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci.conf \ - $(LOCAL_PATH)/nfc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf \ - $(LOCAL_PATH)/nfc/libnfc-nxp_RF.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp_RF.conf - PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ diff --git a/nfc/libnfc-nci.conf b/nfc/libnfc-nci.conf deleted file mode 100644 index 0059186..0000000 --- a/nfc/libnfc-nci.conf +++ /dev/null @@ -1,117 +0,0 @@ -########################## Start of libnfc-nci.conf ########################### -############################################################################### -# Application options -NFC_DEBUG_ENABLED=1 -############################################################################### -# performance measurement -# Change this setting to control how often USERIAL log the performance (throughput) -# data on read/write/poll -# defailt is to log performance dara for every 100 read or write -#REPORT_PERFORMANCE_MEASURE=100 -############################################################################### -# File used for NFA storage -NFA_STORAGE="/data/nfc" -############################################################################### -# Configure the default NfcA/IsoDep techology and protocol route. Can be -# either a secure element (e.g. 0xF4) or the host (0x00) -#DEFAULT_ISODEP_ROUTE=0x00 - -############################################################################### -## Default poll duration (in ms) -## The defualt is 500ms if not set -NFA_DM_DISC_DURATION_POLL=500 - -############################################################################### -# Force UICC to only listen to the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F -UICC_LISTEN_TECH_MASK=0x07 - -############################################################################### -# Force HOST listen feature enable or disable. -# 0: Disable -# 1: Enable -HOST_LISTEN_ENABLE=0x01 -############################################################################### -# When screen is turned off, specify the desired power state of the controller. -# 0: power-off-sleep state; DEFAULT -# 1: full-power state -# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) -SCREEN_OFF_POWER_STATE=1 -############################################################################### -# Force tag polling for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | -# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | -# NFA_TECHNOLOGY_MASK_B_PRIME | -# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE. -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */ -# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */ -POLLING_TECH_MASK=0x4F -############################################################################### -# Force P2P to only listen for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | -# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */ -# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */ -P2P_LISTEN_TECH_MASK=0x45 -############################################################################### -PRESERVE_STORAGE=0x01 -############################################################################### -# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. -# The value is set to 3 by default as it assumes we will discover 0xF2, -# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced -# so that the stack will not wait any longer than necessary. - -# Maximum EE supported number -# NXP PN547C2 0x02 -# NXP PN65T 0x03 -# NXP PN548C2 0x02 -# NXP PN66T 0x03 -NFA_MAX_EE_SUPPORTED=0x03 -############################################################################## -# Deactivate notification wait time out in seconds used in ETSI Reader mode -# 0 - Infinite wait -NFA_DM_DISC_NTF_TIMEOUT=0 - -############################################################################### -# AID_MATCHING constants -# AID_MATCHING_EXACT_ONLY 0x00 -# AID_MATCHING_EXACT_OR_PREFIX 0x01 -# AID_MATCHING_PREFIX_ONLY 0x02 -#AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 -AID_MATCHING_MODE=0x03 -############################################################################### -# Preferred Secure Element for Technology based routing -# eSE 0x01 -# UICC 0x02 - -NXP_PRFD_TECH_SE=0x01 - -################################################################################ -#Set bit to 1 , black list is enabled -#Set bit to 0, to disable balcklist -NFA_AID_BLOCK_ROUTE=0x00 - -################################################################################ -# Maximum WTX requests entertained by MW -NXP_WM_MAX_WTX_COUNT=30 -################################################################################ -#Set the default Felica T3T System Code : -#This settings will be used when application does not set this parameter -DEFAULT_SYS_CODE={FE:FE} -######################################################################### -#Set NCI credit notification timeout value -NXP_NCI_CREDIT_NTF_TIMEOUT=2 -######################################################################### diff --git a/nfc/libnfc-nxp.conf b/nfc/libnfc-nxp.conf deleted file mode 100644 index 4bf9999..0000000 --- a/nfc/libnfc-nxp.conf +++ /dev/null @@ -1,543 +0,0 @@ -#################### This file is used by NXP NFC NCI HAL ##################### -# Sep.24, 2020 - Merged from MW11.51.F1 by Jian -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 -NFC_DEBUG_ENABLED=1 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/nq-nci" - -################################################################################# -#VEN Toggle Config -#Disable = 0x00 -#Enable = 0x01 -ENABLE_VEN_TOGGLE=0x00 - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Mifare Reader implementation -# 0: General implementation -# 1: Legacy implementation -LEGACY_MIFARE_READER=0 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libsn100u_fw.so" - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, -# out of them only one can be configured at a time. -# For PN553 only -#NXP_EXT_TVDD_CFG=0x02 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms -#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set -# to 00 last bit -#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set -# to 0x00 -#NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -#set autonomous mode -# disable autonomous 0x00 -# enable autonomous 0x01 -NXP_AUTONOMOUS_ENABLE=0x00 -############################################################################### -#set Guard Timer -# Gurad Timer range to 0x0F-0xFF(i.e.15-255 seconds) -NXP_GUARD_TIMER_VALUE=0x0F -############################################################################### -#Enable SWP full power mode when phone is power off -#NXP_SWP_FULL_PWR_ON=0x00 - -################################################################################ -#This is used to configure UICC2 at boot time. -# UICC2 0x03 -NXP_DEFAULT_UICC2_SELECT=0x03 -############################################################################### -# CE when Screen state is locked -# This setting is for DEFAULT_AID_ROUTE, -# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=20 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_AID_ROUTE=0x01 - -############################################################################### -#Set the ISODEP (Mifare Desfire) route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_ISODEP_ROUTE=0x01 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_MIFARE_CLT_ROUTE=0x01 - -############################################################################### -#Set the Felica CLT route Location : -#This settings will be used when application does not set this parameter -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_FELICA_CLT_ROUTE=0x01 - -############################################################################### -#Set the default AID Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen off unlock -# bit pos 4 = Screen On lock -# bit pos 5 = Screen Off lock -DEFAULT_AID_PWR_STATE=0x3B - -############################################################################### -#Set the Mifare Desfire Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen off unlock -# bit pos 4 = Screen On lock -# bit pos 5 = Screen Off lock -DEFAULT_DESFIRE_PWR_STATE=0x3B - -############################################################################### -#Set the Mifare CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen off unlock -# bit pos 4 = Screen On lock -# bit pos 5 = Screen Off lock -DEFAULT_MIFARE_CLT_PWR_STATE=0x3B - -############################################################################### -#Set the Felica CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen off unlock -# bit pos 4 = Screen On lock -# bit pos 5 = Screen Off lock -DEFAULT_FELICA_CLT_PWR_STATE=0x3B - -############################################################################### -#Set the T4TNfcee AID Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen off unlock -# bit pos 4 = Screen On lock -# bit pos 5 = Screen Off lock -DEFAULT_T4TNFCEE_AID_POWER_STATE=0x3B - -############################################################################### -#Set the default Felica T3T System Code OffHost route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_SYS_CODE_ROUTE=0x00 -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -#AID_MATCHING_PLATFORM=0x01 - -############################################################################### -# P61 interface options -# SPI 0x02 -NXP_P61_LS_DEFAULT_INTERFACE=0x02 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -#NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -#NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# Flashing Options Configurations -# FLASH_UPPER_VERSION 0x01 -# FLASH_DIFFERENT_VERSION 0x02 -# FLASH_ALWAYS 0x03 -NXP_FLASH_CONFIG=0x02 - -############################################################################### -# P61 interface options for JCOP Download -# SPI 0x02 -NXP_P61_JCOP_DEFAULT_INTERFACE=0x02 - -############################################################################### -# Option to perform LS update every boot -# Enable 0x01 -# Disable 0x00 -NXP_LS_FORCE_UPDATE_REQUIRED=0x00 - -############################################################################### -# Option to perform JCOP update every boot -# Enable 0x01 -# Disable 0x00 -NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00 - -############################################################################### -# Bail out mode -# If set to 1, NFCC is using bail out mode for either Type A or Type B poll. -# Set this parameter value to 1 if Android Beam is enabled, else set to 0. -NFA_POLL_BAIL_OUT_MODE=0x00 - -############################################################################### -# White list of Hosts -# This values will be the Hosts(NFCEEs) in the HCI Network. -DEVICE_HOST_WHITE_LIST={C0, 80} - -############################################################################### -# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1. -# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm -# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block -# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check -# command is sent waiting for rsp and ntf. -PRESENCE_CHECK_ALGORITHM=2 -############################################################################### -# Options to Fallback to alternative route -# Disable 0x00 -# DH 0x01 -# ESE 0x02 -NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 -############################################################################### -# Vendor Specific Proprietary Protocol & Discovery Configuration -# Set to 0xFF if unsupported -# byte[0] NCI_PROTOCOL_18092_ACTIVE -# byte[1] NCI_PROTOCOL_B_PRIME -# byte[2] NCI_PROTOCOL_DUAL -# byte[3] NCI_PROTOCOL_15693 -# byte[4] NCI_PROTOCOL_KOVIO -# byte[5] NCI_PROTOCOL_MIFARE -# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO -# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME -# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME -NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, FF, FF, FF} - -############################################################################### -#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE -#Enable/Disable block number checks for china transit use case -#Enable 0x01 -#Disable 0x00 -#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 - -################################################################################ -#This flags will enable different modes of Lx Debug based on bits of the Byte0 -#Byte 0: -# |_________Bit Mask_______| Debug Mode -# b7|b6|b5|b4|b3|b2|b1|b0| -# | |x | | | | | | Modulation Detected Notification -# | | |X | | | | | Enable L1 Events (ISO14443-4, ISO18092) -# | | | |X | | | | Enable L2 Reader Events(ROW specific) -# | | | | |X | | | Enable Felica SystemCode -# | | | | | |X | | Enable Felica RF (all Felica CM events) -# | | | | | | |X | Enable L2 Events CE (ISO14443-3, RF Field ON/OFF) -#Byte 1: RFU, shall always be 0x00 -# Byte1 Byte0 -# \__ __/ -# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0031 ==> Modulation detected, L1, L2 CE -NXP_CORE_PROP_SYSTEM_DEBUG=0x0000 - -############################################################################### -#Enable NXP NCI runtime parser library -#Enable 0x01 -#Disable 0x00 -NXP_NCI_PARSER_LIBRARY=0x00 - -############################################################################### -# Timeout value in milliseconds for JCOP OS download to complete -OS_DOWNLOAD_TIMEOUT_VALUE=60000 - -############################################################################### -# Forcing HOST to listen for a selected protocol -# 0x00 : Disable Host Listen -# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A -# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B -# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F -# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F -HOST_LISTEN_TECH_MASK=0x07 - -############################################################################### -# Enable forward functionality -# Disable 0x00 -# Enable 0x01 -FORWARD_FUNCTIONALITY_ENABLE=0x01 - -############################################################################### -# Configure the NFC Extras to open and use a static pipe. If the value is -# not set or set to 0, then the default is use a dynamic pipe based on a -# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value -# for each EE (ESE/SIM1/SIM2) -OFF_HOST_ESE_PIPE_ID=0x16 -OFF_HOST_SIM_PIPE_ID=0x0A -OFF_HOST_SIM2_PIPE_ID=0x23 - -############################################################################### -#Set the Felica T3T System Code Power state : -#This settings will be used when application does not set this parameter -#Update Power state as per NCI2.0 -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen On lock -# bit pos 4 = Screen off unlock -# bit pos 5 = Screen Off lock -DEFAULT_SYS_CODE_PWR_STATE=0x00 -############################################################################### -#Default Secure Element route id -DEFAULT_OFFHOST_ROUTE=0x02 - -############################################################################### -#Maximum SMB transceive wait for response -NXP_SMB_TRANSCEIVE_TIMEOUT=2000 -############################################################################### -# Firmware file type -#.so file 0x01 -#.bin file 0x02 -NXP_FW_TYPE=0x01 -############################################################################ -# Extended APDU length for ISO_DEP -ISO_DEP_MAX_TRANSCEIVE=0xFEFF -######################################################################### -# Support for Amendment I SEMS specification -# Support SEMS Amendment I 0x01 -# Support NXP LS client 0x00 -NXP_GP_AMD_I_SEMS_SUPPORTED=0x01 - -############################################################################### -#All eSE terminals shall be match with the /vendor/etc/vintf/manifest.xml file -#under android.hardware.secure_element -# The terminal name shall start from 1 -# Assign terminal number to each interface based on system config -NXP_SPI_SE_TERMINAL_NUM="eSE1" -############################################################################### -# Assign terminal number to each interface based on system config -#NXP_VISO_SE_TERMINAL_NUM="eSE3" -############################################################################### -# Assign terminal number to each interface based on system config -NXP_NFC_SE_TERMINAL_NUM="eSE2" -############################################################################### -#For static or dynamic dual UICC feature support -#Enable static dual uicc feature by setting value 0x00 -#Enable dynamic dual uicc feature by setting value 0x01 -NXP_DUAL_UICC_ENABLE=0x01 -############################################################################### -# Time to wait by DH when NFCC will report eSE Cold Temp Error. -# The value is as per the UM and in seconds -NXP_SE_COLD_TEMP_ERROR_DELAY=0x05 - -############################################################################### -# Set configuration optimization decision setting -# Enable = 0x01 -# Disable = 0x00 -NXP_SET_CONFIG_ALWAYS=0x01 - -############################################################################### -#OffHost ESE route location for MultiSE -#ESE = 01 -OFFHOST_ROUTE_ESE={01} - -############################################################################### -#OffHost UICC route location for MultiSE -#UICC1 = 02 -#UICC2 = 03 -OFFHOST_ROUTE_UICC={02:03} - -############################################################################### -#T4T NFCEE ENABLE -#bit pos 0 = T4T NFCEE Enable -#bit pos 6 = T4T NFCEE Contactless write enable -NXP_T4T_NFCEE_ENABLE=0x01 - -############################################################################### -#CORE_SET_CONF_CMD to reset Prop Emvco Flag -NXP_PROP_RESET_EMVCO_CMD={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -#Guard time in ms for the mPOS/SCR module to process the reader start/stop req -NXP_RDR_REQ_GUARD_TIME=0 - -############################################################################### -#MW workaround to enable LPCD when EMVCO polling mode starts and disable -#while switching back to NFC Forum mode -# 0 --> Disable MW workaround -# 1 --> Enable MW workaround -# 2 --> Use this option only for FW versions below 1.10.52 -NXP_RDR_DISABLE_ENABLE_LPCD=0 - -############################################################################### -# Firmware patch format, Only 1 and 5 should be set -# 0 -> NFC Default -# 1 -> EMVCO Default -# 3 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE = Removal process -# 5 -> EMVCO Cert Polling, DISC_IDLE = Removal process , DISC DEACTIVATE = POWER_OFF -# 7 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE = POWER_OFF -NFA_CONFIG_FORMAT=1 - -################################################################################ -# This will enable power state required for GSMA testing. -# When this is enabled , then default AID route power state is added with this power state -# If any aid with power state 0 is added, then this power state is used. -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen off unlock -# bit pos 4 = Screen On lock -# bit pos 5 = Screen Off lock -#DEFUALT_GSMA_PWR_STATE=0x3B - -################################################################################# -# Enable disconnect tag in screen off -# Disable 0x00 -# Enable 0x01 -NXP_DISCONNECT_TAG_IN_SCRN_OFF=0x01 -################################################################################# -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -# Clock timeout settings A004 -# eSE (SVDD) PWR REQ settings A0F2 -# Window size A0D8 -# DWP Speed A0D5 -# How eSE connected to PN553 A012 -# UICC2 bit rate A0D1 -# SWP1A interface A0D4 -# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037 -# Delay between EVT_END_OF_OPERATION and SE Deactivation set to 0x32(5ms) A113 -NXP_CORE_CONF_EXTN={20, 02, 21, 07, - A0, EC, 01, 01, - A0, ED, 01, 01, - A1, 13, 01, 32, - A0, 07, 01, 01, - A0, 0A, 01, 20, - A0, 47, 02, 00, 27, - A0, 85, 04, 58, 08, A8, AC -} - -# A0, 40, 01, 00 -# A0, 41, 01, 02, -# A0, 43, 01, 04, -# } - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 33, 11, - 28, 01, 00, - 21, 01, 00, - 30, 01, 04, - 31, 01, 00, - 32, 01, 60, - 38, 01, 01, - 33, 00, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 3E, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01, - 68, 01, 01, - 85, 01, 01 - } -############################################################################### -# Enable(0x01) or disable(0x00) non-standard tag reading -# Disable Non-standard card read 0x00 -# Enable Non-standard card read 0x01 -NXP_SUPPORT_NON_STD_CARD=0x01 -################################################################################# -# Enable(0x01) or disable(0x00) iso dep sak merge -# Disable SAK merging 0x00 -# Enable SAK merging 0x01 -NXP_ISO_DEP_MERGE_SAK=0x01 -################################################################################# -# Enable(0x01) or disable(0x00 ) for getting HW Info log over SMB wired -# Disable getting HW info log 0x00 -# Enable getting HW info log 0x01 -NXP_GET_HW_INFO_LOG=0x00 -################################################################################# -# Valid time difference range within for non-standard tag detection from first -# Activation fail to next discovery -# Note :- This will take effect only when NXP_SUPPORT_NON_STD_CARD is enabled -# Default 100 ms -NXP_NON_STD_CARD_TIMEDIFF=100 -################################################################################# - diff --git a/nfc/libnfc-nxp_RF.conf b/nfc/libnfc-nxp_RF.conf deleted file mode 100644 index 3651f91..0000000 --- a/nfc/libnfc-nxp_RF.conf +++ /dev/null @@ -1,226 +0,0 @@ -############################################################## -## Sep.24, 2020 - Merged from MW11.51.F1 by Jian ############# -## K2 P1.1 libnfc-nxp_RF.conf FW58 test 9th,Sep 2020######### -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 -#NXP_SYS_CLOCK_TO_CFG=0x06 - -############################################################################### -# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us -# min value = 0x01 to max = 0x1F -NXP_CLOCK_REQ_DELAY=0x1E - -############################################################################### -# MAX 20 RF configuration blocks are supported by MW -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#PMU_CFG - -NXP_RF_CONF_BLK_1={ - 20, 02, E5, 05, - A0, 0E, 2C, F0, 00, 3E, 11, E4, E4, E4, 00, 00, 00, 00, 00, A7, 8E, FF, FF, 23, 23, 23, 23, 0A, 00, 00, 00, 00, 02, 00, 00, 01, 00, 10, 00, 04, 00, 00, 00, 17, 40, FF, 07, 13, 07, 05, 13, - A0, A4, 85, 14, 00, 01, 00, 00, 00, 00, 00, 00, 01, 00, 03, 00, 05, 00, 07, 00, 08, 00, 0A, 00, 0C, 00, 0E, 00, 10, 00, 11, 00, 13, 00, 14, 00, 16, 00, 18, 00, 19, 00, 1A, 00, 1C, 00, 1D, 00, 1F, 00, 20, 00, 21, 00, 24, 00, 25, 00, 27, 00, 29, 00, 2A, 00, 2C, 00, 2D, 00, 2F, 00, 31, 00, 32, 00, 34, 00, 35, 00, 37, 00, 39, 00, 3A, 00, 3C, 00, 3D, 00, 3F, 00, 41, 00, 42, 00, 44, 00, 46, 00, 47, 00, 49, 00, 4A, 00, 4C, 00, 4E, 00, 4F, 00, 51, 00, 52, 00, 54, 00, 56, 00, 57, 00, 59, 00, 5A, 00, 5C, 00, 5E, 00, 5F, 00, 61, 00, 62, 00, 64, 00, - A0, 11, 07, 01, 4A, 32, 01, C8, F6, F6, - A0, A5, 0D, 3B, 3B, 3B, 3B, 3B, 3B, FF, 03, 1F, 00, 3B, 00, 00, - A0, 6A, 10, 74, 04, 74, 04, 74, 04, 74, 04, 38, 04, 38, 04, 38, 04, 38, 04 -} - -NXP_RF_CONF_BLK_2={ - 20, 02, CC, 01, - A0, 34, C8, 23, 04, 3D, 01, 02, 19, B9, 0A, 00, 00, B9, 0A, 00, 00, 82, 0C, 00, 00, 15, 10, 00, 00, DE, 11, 00, 00, DE, 11, 00, 00, DE, 11, 00, 00, DE, 11, 00, 00, 71, 15, 00, 00, 04, 19, 00, 00, 04, 19, 00, 00, CE, 1A, 00, 00, CE, 1A, 00, 00, 2A, 20, 00, 00, 2A, 20, 00, 00, 2A, 20, 00, 00, BD, 23, 00, 00, BD, 23, 00, 00, BD, 23, 00, 00, BD, 23, 00, 00, BD, 23, 00, 00, 9C, 3A, 00, 00, 9C, 3A, 00, 00, 9C, 3A, 00, 00, 03, 19, 12, 01, 00, 00, C9, 01, 00, 00, AE, 02, 00, 00, 37, 03, 00, 00, 1C, 04, 00, 00, A5, 04, 00, 00, B8, 05, 00, 00, AF, 07, 00, 00, 5D, 0A, 00, 00, 4C, 0E, 00, 00, 71, 15, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00, 7A, 47, 00, 00 -} - -NXP_RF_CONF_BLK_3={ - 20, 02, 66, 01, - A1, 0A, 62, 09, 18, 7A, 03, 00, 00, 7A, 03, 00, 00, 7A, 03, 00, 00, 7A, 03, 00, 00, 7A, 03, 00, 00, 78, 05, 00, 00, 08, 07, 00, 00, FC, 08, 00, 00, FC, 08, 00, 00, 92, 09, 00, 00, 92, 09, 00, 00, DC, 0A, 00, 00, DC, 0A, 00, 00, 48, 0D, 00, 00, 30, 11, 00, 00, 30, 11, 00, 00, 8E, 12, 00, 00, 7C, 15, 00, 00, 70, 17, 00, 00, 58, 1B, 00, 00, 40, 1F, 00, 00, 28, 23, 00, 00, 28, 23, 00, 00, 28, 23, 00, 00 -} - -NXP_RF_CONF_BLK_4={20, 02, F1, 01, A0, A9, ED, 00, 2A, FF, 01, 24, FF, 02, 1F, FF, 03, 1A, FF, 04, 16, FF, 05, 12, FF, 06, 0F, FF, 07, 0C, FF, 08, 09, FF, 09, 07, FF, 0A, 05, FF, 0B, 03, FF, 0C, 01, FF, 0D, 00, F5, 0E, 00, DC, 0F, 00, C6, 10, 00, B3, 11, 00, A2, 12, 00, 92, 13, 00, 84, 14, 00, 77, 15, 00, 6B, 16, 00, 60, 17, 00, 57, 18, 00, 4E, 19, 00, 46, 1A, 00, 3F, 1B, 00, 39, 1C, 00, 33, 1D, 00, 2E, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A} - - -NXP_RF_CONF_BLK_5={ - 20, 02, C5, 02, - A0, 0B, BB, 00, 1D, 01, 14, 6A, 2A, E8, 03, E8, 03, 06, 10, 0E, 2C, 01, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 3C, 00, 00, 00, 3C, 00, 00, 00, 3C, 00, 00, 00, 00, 00, 00, 00, - A0, A6, 03, C0, 08, 08 -} - -NXP_RF_CONF_BLK_6={ - 20, 02, E9, 05, - A0, AB, 82, 27, 1B, 33, 04, 42, 04, 55, 04, 75, 04, 9E, 04, C7, 04, F0, 04, 20, 05, 4F, 05, 7F, 05, B8, 05, F2, 05, 2B, 06, 72, 06, BA, 06, 02, 07, 49, 07, 91, 07, F0, 07, 50, 08, AF, 08, 0F, 09, 6E, 09, E1, 09, 54, 0A, C6, 0A, 56, 0B, E5, 0B, 74, 0C, 04, 0D, 93, 0D, 52, 0E, 11, 0F, D0, 0F, 8F, 10, 4F, 11, 0E, 12, 2C, 13, 4B, 14, 6A, 15, 88, 16, A7, 17, C6, 18, 44, 1A, C2, 1B, 41, 1D, BF, 1E, 9D, 20, 7B, 22, 58, 24, 96, 26, D3, 28, 11, 2B, 4E, 2D, 4B, 30, 47, 33, 44, 36, 40, 39, 3D, 3C, A2, 3F, 07, 43, 6C, 46, E6, 4A, 61, 4F, - A0, A7, 0B, 00, 02, 77, 17, 1F, 1F, 1F, 0A, FF, 19, 05, - A0, A8, 38, 00, 33, 33, 10, 00, 33, 23, 10, 00, 33, 24, 10, 4B, 23, 44, 10, CF, 22, 43, 10, CF, 22, 43, 10, CF, 22, 43, 10, CE, 22, 43, 10, CF, 22, 43, 10, CE, 22, 43, 10, 00, 33, 22, 10, C0, 22, 23, 10, 00, 33, 22, 10, C0, 22, 23, 10, - A0, 98, 08, 2F, 97, 1C, 80, 23, 2F, 2F, 2F, - A0, 9E, 0C, 0B, 97, 1C, 96, 00, 96, 00, 2B, 52, 03, 00, 00 -} - -NXP_RF_CONF_BLK_7={ - 20, 02, FB, 14, - A0, C6, 5B, 00, 00, 04, 00, 00, 00, 3C, 00, 00, 00, 20, 80, FF, 01, 00, 00, 64, 00, 00, C0, 00, 00, 00, C0, 00, 00, 00, 01, 01, 01, 20, 01, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, - A0, 0D, 06, 10, C9, 30, 00, 40, 00, - A0, 0D, 03, 24, 29, 07, - A0, 0D, 03, 24, 30, 07, - A0, 0D, 03, 25, 29, 01, - A0, 0D, 03, 25, 30, 01, - A0, 0D, 06, 40, 42, F0, C1, 37, CC, - A0, 0D, 06, 41, 45, 31, 12, 00, 00, - A0, 0D, 03, 42, 7C, 54, - A0, 0D, 06, 42, 8D, 00, A0, A4, 64, - A0, 0D, 06, 42, 8B, 00, A2, 23, 00, - A0, 0D, 06, 42, 89, 7F, 12, BD, 01, - A0, 0D, 06, 42, 44, 00, B0, 66, 01, - A0, 0D, 06, 42, 43, 24, 24, 4D, ED, - A0, 0D, 06, 42, 41, FD, FF, 5F, F0, - A0, 0D, 06, 42, 40, 20, 77, 33, 3A, - A0, 0D, 06, 42, 4A, 00, 00, 00, 00, - A0, 0D, 06, 42, 49, 00, 00, 00, 00, - A0, 0D, 06, 51, 40, 32, 77, 33, 3A, - A0, 0D, 06, 43, 44, 00, 34, 52, 01 -} - -NXP_RF_CONF_BLK_8={ - 20, 02, FD, 1C, - A0, 0D, 06, 43, 43, A5, 64, 4C, AD, - A0, 0D, 06, 43, 40, 05, 77, 33, 3D, - A0, 0D, 06, 43, 4A, 00, 00, 00, 00, - A0, 0D, 06, 43, 49, 00, 00, 00, 00, - A0, 0D, 06, 44, 44, 00, 34, 52, 01, - A0, 0D, 06, 44, 43, A5, 64, 4C, AD, - A0, 0D, 06, 44, 40, 05, 77, 33, 3D, - A0, 0D, 06, 44, 4A, 00, 00, 00, 00, - A0, 0D, 06, 44, 49, 00, 00, 00, 00, - A0, 0D, 06, 45, 44, 00, 34, 52, 01, - A0, 0D, 06, 45, 43, A5, 64, 4C, AD, - A0, 0D, 06, 45, 40, 05, 77, 33, 3D, - A0, 0D, 06, 45, 4A, 00, 00, 00, 00, - A0, 0D, 06, 45, 49, 00, 00, 00, 00, - A0, 0D, 06, 46, 45, 39, 12, 00, 00, - A0, 0D, 06, 46, 44, 00, 34, 52, 01, - A0, 0D, 06, 47, 43, A5, 64, 4C, ED, - A0, 0D, 06, 47, 40, 05, 77, 33, 3D, - A0, 0D, 06, 47, 4A, 20, AA, 0B, 81, - A0, 0D, 06, 47, 49, B5, 44, 22, 00, - A0, 0D, 06, 48, 43, A5, 64, 4C, AD, - A0, 0D, 06, 48, 40, 05, 77, 33, 3D, - A0, 0D, 06, 48, 4A, 00, 00, 00, 00, - A0, 0D, 06, 48, 49, 00, 00, 00, 00, - A0, 0D, 06, 49, 43, A5, 64, 4C, AD, - A0, 0D, 06, 49, 40, 05, 77, 33, 3D, - A0, 0D, 06, 49, 4A, 00, 00, 00, 00, - A0, 0D, 06, 49, 49, 00, 00, 00, 00 -} - -NXP_RF_CONF_BLK_9={ - 20, 02, FA, 1C, - A0, 0D, 06, 4A, 8B, 48, 02, F0, 80, - A0, 0D, 06, 4A, 43, A5, 64, 4C, AD, - A0, 0D, 06, 4A, 40, 05, 77, 33, 3D, - A0, 0D, 06, 4A, 4A, 00, 00, 00, 00, - A0, 0D, 06, 4A, 49, 00, 00, 00, 00, - A0, 0D, 06, 4B, 43, A5, 64, 4C, 6D, - A0, 0D, 06, 4C, 44, 00, 34, 52, 01, - A0, 0D, 06, 4C, 4A, 00, 00, 00, 00, - A0, 0D, 06, 4C, 49, 00, 00, 00, 00, - A0, 0D, 06, 4C, 40, 85, 51, 33, 3D, - A0, 0D, 06, 4D, 44, 00, 34, 52, 01, - A0, 0D, 06, 4D, 4A, 00, 00, 00, 00, - A0, 0D, 06, 4D, 49, 00, 00, 00, 00, - A0, 0D, 06, 4D, 40, 85, 51, 33, 3D, - A0, 0D, 06, 4E, 45, 31, 12, 00, 00, - A0, 0D, 03, 4E, 7C, 50, - A0, 0D, 06, 4E, 8D, 00, 00, 00, 06, - A0, 0D, 06, 4E, 8B, 00, A2, 24, 00, - A0, 0D, 06, 4E, 89, 7D, 84, 05, 08, - A0, 0D, 06, 4E, 44, 00, B0, 66, 01, - A0, 0D, 06, 4E, 43, A5, 64, 5C, AD, - A0, 0D, 06, 4E, 41, FD, FF, 5F, F0, - A0, 0D, 06, 4E, 40, 07, 77, 33, 3D, - A0, 0D, 06, 4F, 4A, 2A, 8E, 8D, 2A, - A0, 0D, 06, 4F, 49, 5D, 27, 27, 00, - A0, 0D, 06, 60, 4E, FF, FF, FF, 01, - A0, 0D, 06, 60, 4F, FF, FF, FF, 01, - A0, 0D, 06, 60, 50, FF, FF, FF, 3F -} - -NXP_RF_CONF_BLK_10={ - 20, 02, FD, 1C, - A0, 0D, 06, 80, 7D, A0, 00, 96, BF, - A0, 0D, 06, 80, 80, 42, 00, 04, 00, - A0, 0D, 06, 80, C9, 30, 00, 00, 00, - A0, 0D, 06, 8C, 80, 41, 00, 04, 00, - A0, 0D, 06, 90, 4F, FF, FF, F0, 01, - A0, 0D, 06, 90, 4E, FF, FF, F0, 01, - A0, 0D, 06, 90, 39, 3F, 00, 00, 61, - A0, 0D, 06, 9B, A9, 84, 00, 00, 00, - A0, 0D, 06, 9B, A1, 7F, 7F, 7F, 7F, - A0, 0D, 06, 9B, 99, 7F, 7F, 7F, 7F, - A0, 0D, 06, 9B, 95, FF, 00, 0F, 00, - A0, 0D, 06, 9B, A5, 7F, 7F, 7F, 7F, - A0, 0D, 06, 9B, 9D, 7F, 7F, 7F, 7F, - A0, 0D, 06, 9B, 97, FF, 00, 0F, 00, - A0, 0D, 06, 9B, 4F, FF, FF, FF, 01, - A0, 0D, 06, 9B, 4E, FF, FF, FF, 01, - A0, 0D, 06, 91, D4, F8, 84, EF, 03, - A0, 0D, 06, 91, D2, 4A, 4A, 4B, 38, - A0, 0D, 06, 9C, A9, 84, 00, 00, 00, - A0, 0D, 06, 9C, A1, 7F, 22, 5F, 00, - A0, 0D, 06, 9C, 99, 7F, 22, 7F, 7F, - A0, 0D, 06, 9C, 95, FF, 00, 0F, 00, - A0, 0D, 06, 9C, A5, 7F, 22, 5F, 00, - A0, 0D, 06, 9C, 9D, 7F, 22, 7F, 7F, - A0, 0D, 06, 9C, 97, FF, 00, 0F, 00, - A0, 0D, 06, 9C, 4F, 9F, 88, FF, 01, - A0, 0D, 06, 9C, 4E, 9F, 88, FF, 01, - A0, 0D, 06, 95, D4, F8, 84, 75, 00 -} - -NXP_RF_CONF_BLK_11={ - 20, 02, EC, 12, - A0, 0D, 06, 95, D2, 4A, 4B, 4B, 58, - A0, 0D, 06, 9D, A9, 84, 00, 00, 00, - A0, 0D, 06, 9D, A1, 7F, 7F, 7F, 7F, - A0, 0D, 06, 9D, 99, 7F, 7F, 7F, 7F, - A0, 0D, 06, 9D, 95, FF, 00, 0F, 00, - A0, 0D, 06, 9D, A5, 7F, 7F, 7F, 7F, - A0, 0D, 06, 9D, 9D, 7F, 7F, 7F, 7F, - A0, 0D, 06, 9D, 97, FF, 00, 0F, 00, - A0, 0D, 06, 9D, 4F, FF, FF, FF, 01, - A0, 0D, 06, 9D, 4E, FF, FF, FF, 01, - A0, 0D, 06, 99, D4, F8, 04, E4, 01, - A0, 0D, 06, 99, D2, 4A, 4B, 4B, 48, - A0, AF, 09, 11, 2F, 00, 23, 11, 2F, 00, 23, 00, - A0, 92, 28, 37, 00, 1B, 00, FC, 81, 0F, 00, 22, 80, 0F, 00, 14, 00, 20, 70, EA, 01, 43, 18, 32, 16, 78, 30, 0D, 00, 03, 55, EA, 05, 01, 04, 68, 02, 3F, 92, 04, 00, 0C, 13, - A0, 1F, 06, 63, 00, 42, 00, 14, 00, - A0, 9A, 02, 00, 00, - A0, 99, 0A, 03, 00, 80, 00, 00, 80, 00, 00, 00, 00, - A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00, 82, 04, 00, C0, 05, C0, 00, 00, 01, 00, 01, A0, 00, A0, 00, 03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00, 05, 7F, 00, 00, 01, 00, 03 -} - -NXP_RF_CONF_BLK_12={ - 20, 02, 46, 08, - A0, 0D, 03, 61, 09, 7F, - A0, 0D, 06, 60, AB, FF, FF, 00, 00, - A0, 0D, 06, 60, 95, FF, FF, 0F, 00, - A0, 0D, 06, 60, 97, FF, FF, 0F, 00, - A0, 0D, 06, 82, 82, 47, 80, 00, 00, - A0, 0D, 06, 80, 82, 47, 80, 00, 00, - A0, 0D, 06, 62, 32, AE, 00, 7F, 00, - A0, 0D, 06, 67, 32, AE, 00, 1F, 00 -} -NXP_RF_CONF_MAX_NUM=12 diff --git a/proprietary-files.txt b/proprietary-files.txt index d723a4e..545fa77 100644 --- a/proprietary-files.txt +++ b/proprietary-files.txt @@ -451,8 +451,6 @@ vendor/lib64/unnhal-acc-gpu.so vendor/lib64/unnhal-acc-htp.so # NFC -vendor/etc/libnfc-nxp.conf -vendor/etc/libnfc-nxp_RF.conf vendor/lib/libsn100u_fw.so # NVRAM