136 lines
5.6 KiB
Plaintext
136 lines
5.6 KiB
Plaintext
###################################
|
|
##### ANTENNA INFORMATION #####
|
|
###################################
|
|
|
|
###################################
|
|
# ANTENNA INFO VECTOR SIZE
|
|
###################################
|
|
# The number of antenna info
|
|
# structures in the vector. Each
|
|
# entry in this vector is a structure
|
|
# with the following elements:
|
|
#
|
|
# - CARRIER_FREQUENCY
|
|
# - PC_OFFSET
|
|
# - PC_VARIATION_CORRECTION
|
|
# - PC_VARIATION_CORRECTION_UNC
|
|
# - SIGNAL_GAIN_CORRECTION
|
|
# - SIGNAL_GAIN_CORRECTION_UNC
|
|
#
|
|
# Notes:
|
|
# CARRIER_FREQUENCY
|
|
# The carrier frequency in MHz.
|
|
#
|
|
# PC = PHASE CENTER
|
|
# PC_OFFSET is a structure with six
|
|
# elements: x, y, z and their associated uncertainties
|
|
# Phase center offset (PCO) is defined with
|
|
# respect to the origin of the Android sensor coordinate system, e.g.,
|
|
# center of primary screen for mobiles
|
|
#
|
|
# PC_VARIATION_CORRECTION
|
|
# 2D vectors representing the phase center variation (PCV) corrections,
|
|
# in millimeters, at regularly spaced azimuthal angle (theta) and zenith angle
|
|
# (phi). The PCV correction is added to the phase measurement to obtain the
|
|
# corrected value.
|
|
# The azimuthal angle, theta, is defined with respect to the X axis of the
|
|
# Android sensor coordinate system, increasing toward the Y axis. The zenith
|
|
# angle, phi, is defined with respect to the Z axis of the Android Sensor
|
|
# coordinate system, increasing toward the X-Y plane.
|
|
# Each row vector (outer vectors) represents a fixed theta. The first row
|
|
# corresponds to a theta angle of 0 degrees. The last row corresponds to a
|
|
# theta angle of (360 - deltaTheta) degrees, where deltaTheta is the regular
|
|
# spacing between azimuthal angles, i.e., deltaTheta = 360 / (number of rows).
|
|
# The columns (inner vectors) represent fixed zenith angles, beginning at 0
|
|
# degrees and ending at 180 degrees. They are separated by deltaPhi, the regular
|
|
# spacing between zenith angles, i.e., deltaPhi = 180 / (number of columns - 1).
|
|
#
|
|
# PC_VARIATION_CORRECTION_UNC
|
|
# 2D vectors of 1-sigma uncertainty in millimeters associated with the PCV
|
|
# correction values.
|
|
#
|
|
# SIGNAL_GAIN_CORRECTION
|
|
# 2D vectors representing the signal gain corrections at regularly spaced
|
|
# azimuthal angle (theta) and zenith angle (phi). The values are calculated or
|
|
# measured at the antenna feed point without considering the radio and receiver
|
|
# noise figure and path loss contribution, in dBi, i.e., decibel over isotropic
|
|
# antenna with the same total power. The signal gain correction is added the
|
|
# signal gain measurement to obtain the corrected value.
|
|
# The azimuthal angle, theta, is defined with respect to the X axis of the
|
|
# Android sensor coordinate system, increasing toward the Y axis. The zenith
|
|
# angle, phi, is defined with respect to the Z axis of the Android Sensor
|
|
# coordinate system, increasing toward the X-Y plane.
|
|
# Each row vector (outer vectors) represents a fixed theta. The first row
|
|
# corresponds to a theta angle of 0 degrees. The last row corresponds to a
|
|
# theta angle of (360 - deltaTheta) degrees, where deltaTheta is the regular
|
|
# spacing between azimuthal angles, i.e., deltaTheta = 360 / (number of rows).
|
|
# The columns (inner vectors) represent fixed zenith angles, beginning at 0
|
|
# degrees and ending at 180 degrees. They are separated by deltaPhi, the regular
|
|
# spacing between zenith angles, i.e., deltaPhi = 180 / (number of columns - 1).
|
|
#
|
|
# SIGNAL_GAIN_CORRECTION_UNC
|
|
# 2D vectors of 1-sigma uncertainty in dBi associated with the signal
|
|
# gain correction values.
|
|
#
|
|
# The number of rows and columns could be the same for PC variation correction
|
|
# and signal gain corrections, or could be different
|
|
# If the former then NUMBER_OF_ROWS_ and NUMBER_OF_COLUMNS_ are specified once
|
|
# only, if the latter then NUMBER_OF_ROWS_ and NUMBER_OF_COLUMNS_ represent
|
|
# the number of rows/columns for PC variation correction and
|
|
# NUMBER_OF_ROWS_SGC_ and NUMBER_OF_COLUMNS_SGC_ represent the number of
|
|
# rows/columns for signal gain corrections
|
|
|
|
# ANTENNA_INFO_VECTOR_SIZE must be non zero if antenna corrections are sent
|
|
# ANTENNA_INFO_VECTOR_SIZE = 2
|
|
|
|
CARRIER_FREQUENCY_0 = 1575.42
|
|
|
|
PC_OFFSET_0 = 1.2 0.1 3.4 0.2 5.6 0.3
|
|
|
|
NUMBER_OF_ROWS_0 = 3
|
|
NUMBER_OF_COLUMNS_0 = 4
|
|
|
|
PC_VARIATION_CORRECTION_0_ROW_0 = 11.22 33.44 55.66 77.88
|
|
PC_VARIATION_CORRECTION_0_ROW_1 = 10.2 30.4 50.6 70.8
|
|
PC_VARIATION_CORRECTION_0_ROW_2 = 12.2 34.4 56.6 78.8
|
|
|
|
PC_VARIATION_CORRECTION_UNC_0_ROW_0 = 0.1 0.2 0.3 0.4
|
|
PC_VARIATION_CORRECTION_UNC_0_ROW_1 = 1.1 1.2 1.3 1.4
|
|
PC_VARIATION_CORRECTION_UNC_0_ROW_2 = 2.1 2.2 2.3 2.4
|
|
|
|
SIGNAL_GAIN_CORRECTION_0_ROW_0 = 9.8 8.7 7.6 6.5
|
|
SIGNAL_GAIN_CORRECTION_0_ROW_1 = 5.4 4.3 3.2 2.1
|
|
SIGNAL_GAIN_CORRECTION_0_ROW_2 = 1.3 2.4 3.5 4.6
|
|
|
|
SIGNAL_GAIN_CORRECTION_UNC_0_ROW_0 = 0.11 0.22 0.33 0.44
|
|
SIGNAL_GAIN_CORRECTION_UNC_0_ROW_1 = 0.55 0.66 0.77 0.88
|
|
SIGNAL_GAIN_CORRECTION_UNC_0_ROW_2 = 0.91 0.92 0.93 0.94
|
|
|
|
|
|
CARRIER_FREQUENCY_1 = 1227.6
|
|
|
|
PC_OFFSET_1 = 3.4 0.2 5.6 0.3 1.2 0.1
|
|
|
|
NUMBER_OF_ROWS_1 = 4
|
|
NUMBER_OF_COLUMNS_1 = 2
|
|
NUMBER_OF_ROWS_SGC_1 = 3
|
|
NUMBER_OF_COLUMNS_SGC_1 = 4
|
|
|
|
PC_VARIATION_CORRECTION_1_ROW_0 = 55.66 77.88
|
|
PC_VARIATION_CORRECTION_1_ROW_1 = 11.22 33.44
|
|
PC_VARIATION_CORRECTION_1_ROW_2 = 56.6 78.8
|
|
PC_VARIATION_CORRECTION_1_ROW_3 = 12.2 34.4
|
|
|
|
PC_VARIATION_CORRECTION_UNC_1_ROW_0 = 0.3 0.4
|
|
PC_VARIATION_CORRECTION_UNC_1_ROW_1 = 1.1 1.2
|
|
PC_VARIATION_CORRECTION_UNC_1_ROW_2 = 2.1 2.2
|
|
PC_VARIATION_CORRECTION_UNC_1_ROW_3 = 0.1 0.2
|
|
|
|
SIGNAL_GAIN_CORRECTION_1_ROW_0 = 7.6 6.5 5.4 4.3
|
|
SIGNAL_GAIN_CORRECTION_1_ROW_1 = 1.3 2.4 9.8 8.7
|
|
SIGNAL_GAIN_CORRECTION_1_ROW_2 = 1.4 2.5 3.6 4.7
|
|
|
|
SIGNAL_GAIN_CORRECTION_UNC_1_ROW_0 = 0.91 0.92 0.55 0.66
|
|
SIGNAL_GAIN_CORRECTION_UNC_1_ROW_1 = 0.11 0.22 0.93 0.94
|
|
SIGNAL_GAIN_CORRECTION_UNC_1_ROW_2 = 0.95 0.96 0.33 0.44
|