blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
/*
|
|
|
|
* File: arch/blackfin/mach-common/ints-priority-sc.c
|
|
|
|
* Based on:
|
|
|
|
* Author:
|
|
|
|
*
|
|
|
|
* Created: ?
|
2007-06-11 03:31:30 -04:00
|
|
|
* Description: Set up the interrupt priorities
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
*
|
|
|
|
* Modified:
|
|
|
|
* 1996 Roman Zippel
|
|
|
|
* 1999 D. Jeff Dionne <jeff@uclinux.org>
|
|
|
|
* 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
|
|
|
|
* 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
|
|
|
|
* 2003 Metrowerks/Motorola
|
|
|
|
* 2003 Bas Vermeulen <bas@buyways.nl>
|
2007-07-12 10:41:45 -04:00
|
|
|
* Copyright 2004-2007 Analog Devices Inc.
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
*
|
|
|
|
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, see the file COPYING, or write
|
|
|
|
* to the Free Software Foundation, Inc.,
|
|
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel_stat.h>
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#ifdef CONFIG_KGDB
|
|
|
|
#include <linux/kgdb.h>
|
|
|
|
#endif
|
|
|
|
#include <asm/traps.h>
|
|
|
|
#include <asm/blackfin.h>
|
|
|
|
#include <asm/gpio.h>
|
|
|
|
#include <asm/irq_handler.h>
|
|
|
|
|
|
|
|
#ifdef BF537_FAMILY
|
|
|
|
# define BF537_GENERIC_ERROR_INT_DEMUX
|
|
|
|
#else
|
|
|
|
# undef BF537_GENERIC_ERROR_INT_DEMUX
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* NOTES:
|
|
|
|
* - we have separated the physical Hardware interrupt from the
|
|
|
|
* levels that the LINUX kernel sees (see the description in irq.h)
|
|
|
|
* -
|
|
|
|
*/
|
|
|
|
|
|
|
|
unsigned long irq_flags = 0;
|
|
|
|
|
|
|
|
/* The number of spurious interrupts */
|
|
|
|
atomic_t num_spurious;
|
|
|
|
|
|
|
|
struct ivgx {
|
|
|
|
/* irq number for request_irq, available in mach-bf533/irq.h */
|
2007-07-12 10:41:45 -04:00
|
|
|
unsigned int irqno;
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
/* corresponding bit in the SIC_ISR register */
|
2007-07-12 10:41:45 -04:00
|
|
|
unsigned int isrflag;
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
} ivg_table[NR_PERI_INTS];
|
|
|
|
|
|
|
|
struct ivg_slice {
|
|
|
|
/* position of first irq in ivg_table for given ivg */
|
|
|
|
struct ivgx *ifirst;
|
|
|
|
struct ivgx *istop;
|
|
|
|
} ivg7_13[IVG13 - IVG7 + 1];
|
|
|
|
|
|
|
|
static void search_IAR(void);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Search SIC_IAR and fill tables with the irqvalues
|
|
|
|
* and their positions in the SIC_ISR register.
|
|
|
|
*/
|
|
|
|
static void __init search_IAR(void)
|
|
|
|
{
|
|
|
|
unsigned ivg, irq_pos = 0;
|
|
|
|
for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
|
|
|
|
int irqn;
|
|
|
|
|
2007-07-12 04:17:18 -04:00
|
|
|
ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
|
|
|
|
int iar_shift = (irqn & 7) * 4;
|
|
|
|
if (ivg ==
|
|
|
|
(0xf &
|
2007-07-12 04:17:18 -04:00
|
|
|
bfin_read32((unsigned long *)SIC_IAR0 +
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
(irqn >> 3)) >> iar_shift)) {
|
|
|
|
ivg_table[irq_pos].irqno = IVG7 + irqn;
|
2007-07-12 10:41:45 -04:00
|
|
|
ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
ivg7_13[ivg].istop++;
|
|
|
|
irq_pos++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This is for BF533 internal IRQs
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void ack_noop(unsigned int irq)
|
|
|
|
{
|
|
|
|
/* Dummy function. */
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_core_mask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
irq_flags &= ~(1 << irq);
|
|
|
|
if (!irqs_disabled())
|
|
|
|
local_irq_enable();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_core_unmask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
irq_flags |= 1 << irq;
|
|
|
|
/*
|
|
|
|
* If interrupts are enabled, IMASK must contain the same value
|
|
|
|
* as irq_flags. Make sure that invariant holds. If interrupts
|
|
|
|
* are currently disabled we need not do anything; one of the
|
|
|
|
* callers will take care of setting IMASK to the proper value
|
|
|
|
* when reenabling interrupts.
|
|
|
|
* local_irq_enable just does "STI irq_flags", so it's exactly
|
|
|
|
* what we need.
|
|
|
|
*/
|
|
|
|
if (!irqs_disabled())
|
|
|
|
local_irq_enable();
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_internal_mask_irq(unsigned int irq)
|
|
|
|
{
|
2007-07-12 10:41:45 -04:00
|
|
|
#ifndef CONFIG_BF54x
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
|
|
|
|
~(1 << (irq - (IRQ_CORETMR + 1))));
|
2007-07-12 10:41:45 -04:00
|
|
|
#else
|
|
|
|
unsigned mask_bank, mask_bit;
|
2007-07-12 10:58:21 -04:00
|
|
|
mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
|
|
|
|
mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
|
2007-07-12 05:26:31 -04:00
|
|
|
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
|
|
|
|
~(1 << mask_bit));
|
2007-07-12 10:41:45 -04:00
|
|
|
#endif
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_internal_unmask_irq(unsigned int irq)
|
|
|
|
{
|
2007-07-12 10:41:45 -04:00
|
|
|
#ifndef CONFIG_BF54x
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
|
|
|
|
(1 << (irq - (IRQ_CORETMR + 1))));
|
2007-07-12 10:41:45 -04:00
|
|
|
#else
|
|
|
|
unsigned mask_bank, mask_bit;
|
2007-07-12 10:58:21 -04:00
|
|
|
mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
|
2007-07-12 05:26:31 -04:00
|
|
|
mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
|
|
|
|
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
|
|
|
|
(1 << mask_bit));
|
2007-07-12 10:41:45 -04:00
|
|
|
#endif
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip bfin_core_irqchip = {
|
|
|
|
.ack = ack_noop,
|
|
|
|
.mask = bfin_core_mask_irq,
|
|
|
|
.unmask = bfin_core_unmask_irq,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct irq_chip bfin_internal_irqchip = {
|
|
|
|
.ack = ack_noop,
|
|
|
|
.mask = bfin_internal_mask_irq,
|
|
|
|
.unmask = bfin_internal_unmask_irq,
|
|
|
|
};
|
|
|
|
|
|
|
|
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
|
|
|
|
static int error_int_mask;
|
|
|
|
|
|
|
|
static void bfin_generic_error_ack_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_generic_error_mask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
|
|
|
|
|
|
|
|
if (!error_int_mask) {
|
|
|
|
local_irq_disable();
|
|
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
|
|
|
|
~(1 <<
|
|
|
|
(IRQ_GENERIC_ERROR -
|
|
|
|
(IRQ_CORETMR + 1))));
|
|
|
|
SSYNC();
|
|
|
|
local_irq_enable();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_generic_error_unmask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
local_irq_disable();
|
|
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
|
|
|
|
(IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
|
|
|
|
SSYNC();
|
|
|
|
local_irq_enable();
|
|
|
|
|
|
|
|
error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip bfin_generic_error_irqchip = {
|
|
|
|
.ack = bfin_generic_error_ack_irq,
|
|
|
|
.mask = bfin_generic_error_mask_irq,
|
|
|
|
.unmask = bfin_generic_error_unmask_irq,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void bfin_demux_error_irq(unsigned int int_err_irq,
|
2007-07-12 04:17:18 -04:00
|
|
|
struct irq_desc *intb_desc)
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
{
|
|
|
|
int irq = 0;
|
|
|
|
|
|
|
|
SSYNC();
|
|
|
|
|
|
|
|
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
|
|
|
|
if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
|
|
|
|
irq = IRQ_MAC_ERROR;
|
|
|
|
else
|
|
|
|
#endif
|
|
|
|
if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
|
|
|
|
irq = IRQ_SPORT0_ERROR;
|
|
|
|
else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
|
|
|
|
irq = IRQ_SPORT1_ERROR;
|
|
|
|
else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
|
|
|
|
irq = IRQ_PPI_ERROR;
|
|
|
|
else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
|
|
|
|
irq = IRQ_CAN_ERROR;
|
|
|
|
else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
|
|
|
|
irq = IRQ_SPI_ERROR;
|
|
|
|
else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) &&
|
|
|
|
(bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0))
|
|
|
|
irq = IRQ_UART0_ERROR;
|
|
|
|
else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) &&
|
|
|
|
(bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0))
|
|
|
|
irq = IRQ_UART1_ERROR;
|
|
|
|
|
|
|
|
if (irq) {
|
|
|
|
if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) {
|
|
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
|
|
desc->handle_irq(irq, desc);
|
|
|
|
} else {
|
|
|
|
|
|
|
|
switch (irq) {
|
|
|
|
case IRQ_PPI_ERROR:
|
|
|
|
bfin_write_PPI_STATUS(PPI_ERR_MASK);
|
|
|
|
break;
|
|
|
|
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
|
|
|
|
case IRQ_MAC_ERROR:
|
|
|
|
bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
case IRQ_SPORT0_ERROR:
|
|
|
|
bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case IRQ_SPORT1_ERROR:
|
|
|
|
bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case IRQ_CAN_ERROR:
|
|
|
|
bfin_write_CAN_GIS(CAN_ERR_MASK);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case IRQ_SPI_ERROR:
|
|
|
|
bfin_write_SPI_STAT(SPI_ERR_MASK);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
pr_debug("IRQ %d:"
|
2007-07-12 04:17:18 -04:00
|
|
|
" MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
|
|
|
|
irq);
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
}
|
|
|
|
} else
|
|
|
|
printk(KERN_ERR
|
|
|
|
"%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR"
|
|
|
|
" INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
|
|
|
|
__FUNCTION__, __FILE__, __LINE__);
|
|
|
|
|
|
|
|
}
|
|
|
|
#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
|
|
|
|
|
2007-07-12 04:17:18 -04:00
|
|
|
#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && !defined(CONFIG_BF54x)
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
|
|
|
static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
|
|
|
|
|
|
|
static void bfin_gpio_ack_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
u16 gpionr = irq - IRQ_PF0;
|
|
|
|
|
|
|
|
if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
|
|
|
|
set_gpio_data(gpionr, 0);
|
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_gpio_mask_ack_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
u16 gpionr = irq - IRQ_PF0;
|
|
|
|
|
|
|
|
if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
|
|
|
|
set_gpio_data(gpionr, 0);
|
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
set_gpio_maska(gpionr, 0);
|
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_gpio_mask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
set_gpio_maska(irq - IRQ_PF0, 0);
|
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_gpio_unmask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
set_gpio_maska(irq - IRQ_PF0, 1);
|
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned int bfin_gpio_irq_startup(unsigned int irq)
|
|
|
|
{
|
|
|
|
unsigned int ret;
|
|
|
|
u16 gpionr = irq - IRQ_PF0;
|
|
|
|
|
|
|
|
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
|
|
|
|
ret = gpio_request(gpionr, NULL);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
|
|
bfin_gpio_unmask_irq(irq);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_gpio_irq_shutdown(unsigned int irq)
|
|
|
|
{
|
|
|
|
bfin_gpio_mask_irq(irq);
|
|
|
|
gpio_free(irq - IRQ_PF0);
|
|
|
|
gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
|
|
|
|
{
|
|
|
|
|
|
|
|
unsigned int ret;
|
|
|
|
u16 gpionr = irq - IRQ_PF0;
|
|
|
|
|
|
|
|
if (type == IRQ_TYPE_PROBE) {
|
|
|
|
/* only probe unenabled GPIO interrupt lines */
|
|
|
|
if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
|
|
|
|
return 0;
|
|
|
|
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
|
2007-07-12 04:17:18 -04:00
|
|
|
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
|
|
|
|
ret = gpio_request(gpionr, NULL);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
|
|
} else {
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
set_gpio_dir(gpionr, 0);
|
|
|
|
set_gpio_inen(gpionr, 1);
|
|
|
|
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
|
|
gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
|
|
set_gpio_edge(gpionr, 1);
|
|
|
|
} else {
|
|
|
|
set_gpio_edge(gpionr, 0);
|
|
|
|
gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
|
|
== (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
|
|
set_gpio_both(gpionr, 1);
|
|
|
|
else
|
|
|
|
set_gpio_both(gpionr, 0);
|
|
|
|
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
|
|
|
|
set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
|
|
|
|
else
|
|
|
|
set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
|
|
|
|
|
|
|
|
SSYNC();
|
|
|
|
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
|
|
set_irq_handler(irq, handle_edge_irq);
|
|
|
|
else
|
|
|
|
set_irq_handler(irq, handle_level_irq);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip bfin_gpio_irqchip = {
|
|
|
|
.ack = bfin_gpio_ack_irq,
|
|
|
|
.mask = bfin_gpio_mask_irq,
|
|
|
|
.mask_ack = bfin_gpio_mask_ack_irq,
|
|
|
|
.unmask = bfin_gpio_unmask_irq,
|
|
|
|
.set_type = bfin_gpio_irq_type,
|
|
|
|
.startup = bfin_gpio_irq_startup,
|
|
|
|
.shutdown = bfin_gpio_irq_shutdown
|
|
|
|
};
|
|
|
|
|
|
|
|
static void bfin_demux_gpio_irq(unsigned int intb_irq,
|
2007-07-12 04:17:18 -04:00
|
|
|
struct irq_desc *intb_desc)
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
{
|
|
|
|
u16 i;
|
2007-07-12 04:39:29 -04:00
|
|
|
struct irq_desc *desc;
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
2007-07-12 10:58:21 -04:00
|
|
|
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
int irq = IRQ_PF0 + i;
|
|
|
|
int flag_d = get_gpiop_data(i);
|
|
|
|
int mask =
|
2007-07-12 04:17:18 -04:00
|
|
|
flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i));
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
while (mask) {
|
|
|
|
if (mask & 1) {
|
2007-07-12 04:39:29 -04:00
|
|
|
desc = irq_desc + irq;
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
desc->handle_irq(irq, desc);
|
|
|
|
}
|
|
|
|
irq++;
|
|
|
|
mask >>= 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-07-12 04:17:18 -04:00
|
|
|
#else /* CONFIG_IRQCHIP_DEMUX_GPIO */
|
|
|
|
|
|
|
|
#define NR_PINT_SYS_IRQS 4
|
|
|
|
#define NR_PINT_BITS 32
|
|
|
|
#define NR_PINTS 160
|
|
|
|
#define IRQ_NOT_AVAIL 0xFF
|
|
|
|
|
|
|
|
#define PINT_2_BANK(x) ((x) >> 5)
|
|
|
|
#define PINT_2_BIT(x) ((x) & 0x1F)
|
|
|
|
#define PINT_BIT(x) (1 << (PINT_2_BIT(x)))
|
|
|
|
|
|
|
|
static unsigned char irq2pint_lut[NR_PINTS];
|
2007-07-12 04:39:29 -04:00
|
|
|
static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
|
2007-07-12 04:17:18 -04:00
|
|
|
|
|
|
|
struct pin_int_t {
|
|
|
|
unsigned int mask_set;
|
|
|
|
unsigned int mask_clear;
|
|
|
|
unsigned int request;
|
|
|
|
unsigned int assign;
|
|
|
|
unsigned int edge_set;
|
|
|
|
unsigned int edge_clear;
|
|
|
|
unsigned int invert_set;
|
|
|
|
unsigned int invert_clear;
|
|
|
|
unsigned int pinstate;
|
|
|
|
unsigned int latch;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
|
|
|
|
(struct pin_int_t *)PINT0_MASK_SET,
|
|
|
|
(struct pin_int_t *)PINT1_MASK_SET,
|
|
|
|
(struct pin_int_t *)PINT2_MASK_SET,
|
|
|
|
(struct pin_int_t *)PINT3_MASK_SET,
|
|
|
|
};
|
|
|
|
|
|
|
|
unsigned short get_irq_base(u8 bank, u8 bmap)
|
|
|
|
{
|
|
|
|
|
|
|
|
u16 irq_base;
|
|
|
|
|
|
|
|
if (bank < 2) { /*PA-PB */
|
|
|
|
irq_base = IRQ_PA0 + bmap * 16;
|
|
|
|
} else { /*PC-PJ */
|
|
|
|
irq_base = IRQ_PC0 + bmap * 16;
|
|
|
|
}
|
|
|
|
|
|
|
|
return irq_base;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
|
|
|
|
void init_pint_lut(void)
|
|
|
|
{
|
|
|
|
u16 bank, bit, irq_base, bit_pos;
|
|
|
|
u32 pint_assign;
|
|
|
|
u8 bmap;
|
|
|
|
|
|
|
|
memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut));
|
|
|
|
|
|
|
|
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
|
|
|
|
|
|
|
|
pint_assign = pint[bank]->assign;
|
|
|
|
|
|
|
|
for (bit = 0; bit < NR_PINT_BITS; bit++) {
|
|
|
|
|
|
|
|
bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF;
|
|
|
|
|
|
|
|
irq_base = get_irq_base(bank, bmap);
|
|
|
|
|
|
|
|
irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0);
|
|
|
|
bit_pos = bit + bank * NR_PINT_BITS;
|
|
|
|
|
2007-07-12 04:39:29 -04:00
|
|
|
pint2irq_lut[bit_pos] = irq_base - SYS_IRQS;
|
2007-07-12 04:17:18 -04:00
|
|
|
irq2pint_lut[irq_base - SYS_IRQS] = bit_pos;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
|
|
|
|
|
|
|
static void bfin_gpio_ack_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
|
|
|
|
|
|
pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val);
|
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_gpio_mask_ack_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
2007-07-12 04:39:29 -04:00
|
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
|
|
u8 bank = PINT_2_BANK(pint_val);
|
2007-07-12 04:17:18 -04:00
|
|
|
|
2007-07-12 04:39:29 -04:00
|
|
|
pint[bank]->request = pintbit;
|
|
|
|
pint[bank]->mask_clear = pintbit;
|
2007-07-12 04:17:18 -04:00
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_gpio_mask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
|
|
|
|
|
|
pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
|
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_gpio_unmask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
2007-07-12 04:39:29 -04:00
|
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
|
|
u8 bank = PINT_2_BANK(pint_val);
|
2007-07-12 04:17:18 -04:00
|
|
|
|
2007-07-12 04:39:29 -04:00
|
|
|
pint[bank]->request = pintbit;
|
|
|
|
pint[bank]->mask_set = pintbit;
|
2007-07-12 04:17:18 -04:00
|
|
|
SSYNC();
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned int bfin_gpio_irq_startup(unsigned int irq)
|
|
|
|
{
|
|
|
|
unsigned int ret;
|
|
|
|
u16 gpionr = irq - IRQ_PA0;
|
|
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
|
|
|
|
|
|
if (pint_val == IRQ_NOT_AVAIL)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
|
|
|
|
ret = gpio_request(gpionr, NULL);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
|
|
bfin_gpio_unmask_irq(irq);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bfin_gpio_irq_shutdown(unsigned int irq)
|
|
|
|
{
|
|
|
|
bfin_gpio_mask_irq(irq);
|
|
|
|
gpio_free(irq - IRQ_PA0);
|
|
|
|
gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
|
|
|
|
{
|
|
|
|
|
|
|
|
unsigned int ret;
|
|
|
|
u16 gpionr = irq - IRQ_PA0;
|
|
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
2007-07-12 04:39:29 -04:00
|
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
|
|
u8 bank = PINT_2_BANK(pint_val);
|
2007-07-12 04:17:18 -04:00
|
|
|
|
|
|
|
if (pint_val == IRQ_NOT_AVAIL)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (type == IRQ_TYPE_PROBE) {
|
|
|
|
/* only probe unenabled GPIO interrupt lines */
|
|
|
|
if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
|
|
|
|
return 0;
|
|
|
|
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
|
|
|
|
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
|
|
|
|
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
|
|
|
|
ret = gpio_request(gpionr, NULL);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
|
|
} else {
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_direction_input(gpionr);
|
|
|
|
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
2007-07-12 04:39:29 -04:00
|
|
|
pint[bank]->edge_set = pintbit;
|
2007-07-12 04:17:18 -04:00
|
|
|
} else {
|
2007-07-12 04:39:29 -04:00
|
|
|
pint[bank]->edge_clear = pintbit;
|
2007-07-12 04:17:18 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
|
2007-07-12 04:39:29 -04:00
|
|
|
pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */
|
2007-07-12 04:17:18 -04:00
|
|
|
else
|
2007-07-12 04:39:29 -04:00
|
|
|
pint[bank]->invert_set = pintbit; /* high or rising edge denoted by zero */
|
2007-07-12 04:17:18 -04:00
|
|
|
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
2007-07-12 04:39:29 -04:00
|
|
|
pint[bank]->invert_set = pintbit;
|
2007-07-12 04:17:18 -04:00
|
|
|
else
|
2007-07-12 04:39:29 -04:00
|
|
|
pint[bank]->invert_set = pintbit;
|
2007-07-12 04:17:18 -04:00
|
|
|
|
|
|
|
SSYNC();
|
|
|
|
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
|
|
set_irq_handler(irq, handle_edge_irq);
|
|
|
|
else
|
|
|
|
set_irq_handler(irq, handle_level_irq);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip bfin_gpio_irqchip = {
|
|
|
|
.ack = bfin_gpio_ack_irq,
|
|
|
|
.mask = bfin_gpio_mask_irq,
|
|
|
|
.mask_ack = bfin_gpio_mask_ack_irq,
|
|
|
|
.unmask = bfin_gpio_unmask_irq,
|
|
|
|
.set_type = bfin_gpio_irq_type,
|
|
|
|
.startup = bfin_gpio_irq_startup,
|
|
|
|
.shutdown = bfin_gpio_irq_shutdown
|
|
|
|
};
|
|
|
|
|
|
|
|
static void bfin_demux_gpio_irq(unsigned int intb_irq,
|
|
|
|
struct irq_desc *intb_desc)
|
|
|
|
{
|
|
|
|
u8 bank, pint_val;
|
|
|
|
u32 request, irq;
|
2007-07-12 04:39:29 -04:00
|
|
|
struct irq_desc *desc;
|
2007-07-12 04:17:18 -04:00
|
|
|
|
|
|
|
switch (intb_irq) {
|
|
|
|
case IRQ_PINT0:
|
|
|
|
bank = 0;
|
|
|
|
break;
|
|
|
|
case IRQ_PINT2:
|
|
|
|
bank = 2;
|
|
|
|
break;
|
|
|
|
case IRQ_PINT3:
|
|
|
|
bank = 3;
|
|
|
|
break;
|
|
|
|
case IRQ_PINT1:
|
|
|
|
bank = 1;
|
|
|
|
break;
|
2007-07-12 04:39:29 -04:00
|
|
|
default:
|
|
|
|
return;
|
2007-07-12 04:17:18 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
pint_val = bank * NR_PINT_BITS;
|
|
|
|
|
|
|
|
request = pint[bank]->request;
|
|
|
|
|
|
|
|
while (request) {
|
|
|
|
if (request & 1) {
|
2007-07-12 04:39:29 -04:00
|
|
|
irq = pint2irq_lut[pint_val] + SYS_IRQS;
|
|
|
|
desc = irq_desc + irq;
|
2007-07-12 04:17:18 -04:00
|
|
|
desc->handle_irq(irq, desc);
|
|
|
|
}
|
|
|
|
pint_val++;
|
|
|
|
request >>= 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function should be called during kernel startup to initialize
|
|
|
|
* the BFin IRQ handling routines.
|
|
|
|
*/
|
|
|
|
int __init init_arch_irq(void)
|
|
|
|
{
|
|
|
|
int irq;
|
|
|
|
unsigned long ilat = 0;
|
|
|
|
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
|
2007-07-12 10:41:45 -04:00
|
|
|
#ifdef CONFIG_BF54x
|
|
|
|
bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
|
|
|
|
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
|
|
|
|
bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
|
2007-06-20 23:34:16 -04:00
|
|
|
bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
|
|
|
|
bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
|
2007-07-12 05:26:31 -04:00
|
|
|
bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
|
2007-07-12 10:41:45 -04:00
|
|
|
#else
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
|
2007-06-20 23:34:16 -04:00
|
|
|
bfin_write_SIC_IWR(IWR_ENABLE_ALL);
|
2007-07-12 10:41:45 -04:00
|
|
|
#endif
|
|
|
|
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
SSYNC();
|
|
|
|
|
|
|
|
local_irq_disable();
|
|
|
|
|
|
|
|
#ifndef CONFIG_KGDB
|
|
|
|
bfin_write_EVT0(evt_emulation);
|
|
|
|
#endif
|
|
|
|
bfin_write_EVT2(evt_evt2);
|
|
|
|
bfin_write_EVT3(trap);
|
|
|
|
bfin_write_EVT5(evt_ivhw);
|
|
|
|
bfin_write_EVT6(evt_timer);
|
|
|
|
bfin_write_EVT7(evt_evt7);
|
|
|
|
bfin_write_EVT8(evt_evt8);
|
|
|
|
bfin_write_EVT9(evt_evt9);
|
|
|
|
bfin_write_EVT10(evt_evt10);
|
|
|
|
bfin_write_EVT11(evt_evt11);
|
|
|
|
bfin_write_EVT12(evt_evt12);
|
|
|
|
bfin_write_EVT13(evt_evt13);
|
|
|
|
bfin_write_EVT14(evt14_softirq);
|
|
|
|
bfin_write_EVT15(evt_system_call);
|
|
|
|
CSYNC();
|
|
|
|
|
2007-07-12 04:17:18 -04:00
|
|
|
#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
|
|
|
|
#ifdef CONFIG_PINTx_REASSIGN
|
|
|
|
pint[0]->assign = CONFIG_PINT0_ASSIGN;
|
|
|
|
pint[1]->assign = CONFIG_PINT1_ASSIGN;
|
|
|
|
pint[2]->assign = CONFIG_PINT2_ASSIGN;
|
|
|
|
pint[3]->assign = CONFIG_PINT3_ASSIGN;
|
|
|
|
#endif
|
|
|
|
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
|
|
|
|
init_pint_lut();
|
|
|
|
#endif
|
|
|
|
|
|
|
|
for (irq = 0; irq <= SYS_IRQS; irq++) {
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
if (irq <= IRQ_CORETMR)
|
|
|
|
set_irq_chip(irq, &bfin_core_irqchip);
|
|
|
|
else
|
|
|
|
set_irq_chip(irq, &bfin_internal_irqchip);
|
|
|
|
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
|
|
|
|
if (irq != IRQ_GENERIC_ERROR) {
|
|
|
|
#endif
|
|
|
|
|
2007-07-12 04:17:18 -04:00
|
|
|
switch (irq) {
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
|
2007-07-12 04:17:18 -04:00
|
|
|
#ifndef CONFIG_BF54x
|
|
|
|
case IRQ_PROG_INTA:
|
|
|
|
set_irq_chained_handler(irq,
|
|
|
|
bfin_demux_gpio_irq);
|
|
|
|
break;
|
|
|
|
#if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
|
|
|
|
case IRQ_MAC_RX:
|
|
|
|
set_irq_chained_handler(irq,
|
|
|
|
bfin_demux_gpio_irq);
|
|
|
|
break;
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
#endif
|
2007-07-12 04:17:18 -04:00
|
|
|
#else
|
|
|
|
case IRQ_PINT0:
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
set_irq_chained_handler(irq,
|
|
|
|
bfin_demux_gpio_irq);
|
2007-07-12 04:17:18 -04:00
|
|
|
break;
|
|
|
|
case IRQ_PINT1:
|
|
|
|
set_irq_chained_handler(irq,
|
|
|
|
bfin_demux_gpio_irq);
|
|
|
|
break;
|
|
|
|
case IRQ_PINT2:
|
|
|
|
set_irq_chained_handler(irq,
|
|
|
|
bfin_demux_gpio_irq);
|
|
|
|
break;
|
|
|
|
case IRQ_PINT3:
|
|
|
|
set_irq_chained_handler(irq,
|
|
|
|
bfin_demux_gpio_irq);
|
|
|
|
break;
|
|
|
|
#endif /*CONFIG_BF54x */
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
#endif
|
2007-07-12 04:17:18 -04:00
|
|
|
default:
|
|
|
|
set_irq_handler(irq, handle_simple_irq);
|
|
|
|
break;
|
|
|
|
}
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
|
|
|
|
} else {
|
|
|
|
set_irq_handler(irq, bfin_demux_error_irq);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
|
|
|
|
for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
|
|
|
|
set_irq_chip(irq, &bfin_generic_error_irqchip);
|
|
|
|
set_irq_handler(irq, handle_level_irq);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
|
2007-07-12 04:17:18 -04:00
|
|
|
#ifndef CONFIG_BF54x
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
|
2007-07-12 04:17:18 -04:00
|
|
|
#else
|
|
|
|
for (irq = IRQ_PA0; irq < NR_IRQS; irq++) {
|
|
|
|
#endif
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
set_irq_chip(irq, &bfin_gpio_irqchip);
|
|
|
|
/* if configured as edge, then will be changed to do_edge_IRQ */
|
|
|
|
set_irq_handler(irq, handle_level_irq);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
bfin_write_IMASK(0);
|
|
|
|
CSYNC();
|
|
|
|
ilat = bfin_read_ILAT();
|
|
|
|
CSYNC();
|
|
|
|
bfin_write_ILAT(ilat);
|
|
|
|
CSYNC();
|
|
|
|
|
2007-07-12 04:17:18 -04:00
|
|
|
printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
/* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
|
|
|
|
* local_irq_enable()
|
|
|
|
*/
|
|
|
|
program_IAR();
|
|
|
|
/* Therefore it's better to setup IARs before interrupts enabled */
|
|
|
|
search_IAR();
|
|
|
|
|
|
|
|
/* Enable interrupts IVG7-15 */
|
|
|
|
irq_flags = irq_flags | IMASK_IVG15 |
|
|
|
|
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
|
2007-07-12 04:17:18 -04:00
|
|
|
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_DO_IRQ_L1
|
2007-07-12 04:17:18 -04:00
|
|
|
void do_irq(int vec, struct pt_regs *fp) __attribute__((l1_text));
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
#endif
|
|
|
|
|
|
|
|
void do_irq(int vec, struct pt_regs *fp)
|
|
|
|
{
|
|
|
|
if (vec == EVT_IVTMR_P) {
|
|
|
|
vec = IRQ_CORETMR;
|
|
|
|
} else {
|
|
|
|
struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
|
|
|
|
struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
|
2007-07-12 10:41:45 -04:00
|
|
|
#ifdef CONFIG_BF54x
|
|
|
|
unsigned long sic_status[3];
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
2007-07-12 10:41:45 -04:00
|
|
|
SSYNC();
|
|
|
|
sic_status[0] = bfin_read_SIC_ISR(0) & bfin_read_SIC_IMASK(0);
|
|
|
|
sic_status[1] = bfin_read_SIC_ISR(1) & bfin_read_SIC_IMASK(1);
|
|
|
|
sic_status[2] = bfin_read_SIC_ISR(2) & bfin_read_SIC_IMASK(2);
|
2007-07-12 04:39:29 -04:00
|
|
|
|
2007-07-12 10:58:21 -04:00
|
|
|
for (;; ivg++) {
|
2007-07-12 10:41:45 -04:00
|
|
|
if (ivg >= ivg_stop) {
|
|
|
|
atomic_inc(&num_spurious);
|
|
|
|
return;
|
|
|
|
}
|
2007-07-12 04:17:18 -04:00
|
|
|
if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
|
2007-07-12 10:41:45 -04:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
unsigned long sic_status;
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
SSYNC();
|
|
|
|
sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
|
|
|
|
|
|
|
|
for (;; ivg++) {
|
|
|
|
if (ivg >= ivg_stop) {
|
|
|
|
atomic_inc(&num_spurious);
|
|
|
|
return;
|
|
|
|
} else if (sic_status & ivg->isrflag)
|
|
|
|
break;
|
|
|
|
}
|
2007-07-12 10:41:45 -04:00
|
|
|
#endif
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
vec = ivg->irqno;
|
|
|
|
}
|
|
|
|
asm_do_IRQ(vec, fp);
|
|
|
|
|
|
|
|
#ifdef CONFIG_KGDB
|
|
|
|
kgdb_process_breakpoint();
|
|
|
|
#endif
|
|
|
|
}
|