android_kernel_xiaomi_sm8350/net/rfkill/rfkill-input.c

460 lines
11 KiB
C
Raw Normal View History

/*
* Input layer to RF Kill interface connector
*
* Copyright (c) 2007 Dmitry Torokhov
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/init.h>
#include <linux/rfkill.h>
#include <linux/sched.h>
#include "rfkill-input.h"
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
MODULE_DESCRIPTION("Input layer to RF switch connector");
MODULE_LICENSE("GPL");
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
enum rfkill_input_master_mode {
RFKILL_INPUT_MASTER_DONOTHING = 0,
RFKILL_INPUT_MASTER_RESTORE = 1,
RFKILL_INPUT_MASTER_UNBLOCKALL = 2,
RFKILL_INPUT_MASTER_MAX, /* marker */
};
2008-10-09 17:15:33 -04:00
/* Delay (in ms) between consecutive switch ops */
#define RFKILL_OPS_DELAY 200
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
static enum rfkill_input_master_mode rfkill_master_switch_mode =
RFKILL_INPUT_MASTER_UNBLOCKALL;
module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0);
MODULE_PARM_DESC(master_switch_mode,
"SW_RFKILL_ALL ON should: 0=do nothing; 1=restore; 2=unblock all");
enum rfkill_global_sched_op {
RFKILL_GLOBAL_OP_EPO = 0,
RFKILL_GLOBAL_OP_RESTORE,
RFKILL_GLOBAL_OP_UNLOCK,
RFKILL_GLOBAL_OP_UNBLOCK,
};
/*
* Currently, the code marked with RFKILL_NEED_SWSET is inactive.
* If handling of EV_SW SW_WLAN/WWAN/BLUETOOTH/etc is needed in the
* future, when such events are added, that code will be necessary.
*/
struct rfkill_task {
2008-10-09 17:15:33 -04:00
struct delayed_work dwork;
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
/* ensures that task is serialized */
struct mutex mutex;
/* protects everything below */
spinlock_t lock;
/* pending regular switch operations (1=pending) */
unsigned long sw_pending[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
#ifdef RFKILL_NEED_SWSET
/* set operation pending (1=pending) */
unsigned long sw_setpending[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
/* desired state for pending set operation (1=unblock) */
unsigned long sw_newstate[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
#endif
/* should the state be complemented (1=yes) */
unsigned long sw_togglestate[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
bool global_op_pending;
enum rfkill_global_sched_op op;
2008-10-09 17:15:33 -04:00
/* last time it was scheduled */
unsigned long last_scheduled;
};
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
static void __rfkill_handle_global_op(enum rfkill_global_sched_op op)
{
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
unsigned int i;
switch (op) {
case RFKILL_GLOBAL_OP_EPO:
rfkill_epo();
break;
case RFKILL_GLOBAL_OP_RESTORE:
rfkill_restore_states();
break;
case RFKILL_GLOBAL_OP_UNLOCK:
rfkill_remove_epo_lock();
break;
case RFKILL_GLOBAL_OP_UNBLOCK:
rfkill_remove_epo_lock();
for (i = 0; i < RFKILL_TYPE_MAX; i++)
rfkill_switch_all(i, RFKILL_STATE_UNBLOCKED);
break;
default:
/* memory corruption or bug, fail safely */
rfkill_epo();
WARN(1, "Unknown requested operation %d! "
"rfkill Emergency Power Off activated\n",
op);
}
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
#ifdef RFKILL_NEED_SWSET
static void __rfkill_handle_normal_op(const enum rfkill_type type,
const bool sp, const bool s, const bool c)
{
enum rfkill_state state;
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
if (sp)
state = (s) ? RFKILL_STATE_UNBLOCKED :
RFKILL_STATE_SOFT_BLOCKED;
else
state = rfkill_get_global_state(type);
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
if (c)
state = rfkill_state_complement(state);
rfkill_switch_all(type, state);
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
#else
static void __rfkill_handle_normal_op(const enum rfkill_type type,
const bool c)
{
enum rfkill_state state;
state = rfkill_get_global_state(type);
if (c)
state = rfkill_state_complement(state);
rfkill_switch_all(type, state);
}
#endif
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
static void rfkill_task_handler(struct work_struct *work)
{
2008-10-09 17:15:33 -04:00
struct rfkill_task *task = container_of(work,
struct rfkill_task, dwork.work);
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
bool doit = true;
mutex_lock(&task->mutex);
spin_lock_irq(&task->lock);
while (doit) {
if (task->global_op_pending) {
enum rfkill_global_sched_op op = task->op;
task->global_op_pending = false;
memset(task->sw_pending, 0, sizeof(task->sw_pending));
spin_unlock_irq(&task->lock);
__rfkill_handle_global_op(op);
/* make sure we do at least one pass with
* !task->global_op_pending */
spin_lock_irq(&task->lock);
continue;
} else if (!rfkill_is_epo_lock_active()) {
unsigned int i = 0;
while (!task->global_op_pending &&
i < RFKILL_TYPE_MAX) {
if (test_and_clear_bit(i, task->sw_pending)) {
bool c;
#ifdef RFKILL_NEED_SWSET
bool sp, s;
sp = test_and_clear_bit(i,
task->sw_setpending);
s = test_bit(i, task->sw_newstate);
#endif
c = test_and_clear_bit(i,
task->sw_togglestate);
spin_unlock_irq(&task->lock);
#ifdef RFKILL_NEED_SWSET
__rfkill_handle_normal_op(i, sp, s, c);
#else
__rfkill_handle_normal_op(i, c);
#endif
spin_lock_irq(&task->lock);
}
i++;
}
}
doit = task->global_op_pending;
}
spin_unlock_irq(&task->lock);
mutex_unlock(&task->mutex);
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
static struct rfkill_task rfkill_task = {
2008-10-09 17:15:33 -04:00
.dwork = __DELAYED_WORK_INITIALIZER(rfkill_task.dwork,
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
rfkill_task_handler),
.mutex = __MUTEX_INITIALIZER(rfkill_task.mutex),
.lock = __SPIN_LOCK_UNLOCKED(rfkill_task.lock),
};
2008-10-09 17:15:33 -04:00
static unsigned long rfkill_ratelimit(const unsigned long last)
{
const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY);
return (time_after(jiffies, last + delay)) ? 0 : delay;
}
static void rfkill_schedule_ratelimited(void)
{
if (!delayed_work_pending(&rfkill_task.dwork)) {
schedule_delayed_work(&rfkill_task.dwork,
rfkill_ratelimit(rfkill_task.last_scheduled));
rfkill_task.last_scheduled = jiffies;
}
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
static void rfkill_schedule_global_op(enum rfkill_global_sched_op op)
{
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
unsigned long flags;
spin_lock_irqsave(&rfkill_task.lock, flags);
rfkill_task.op = op;
rfkill_task.global_op_pending = true;
2008-10-09 17:15:33 -04:00
if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) {
/* bypass the limiter for EPO */
cancel_delayed_work(&rfkill_task.dwork);
schedule_delayed_work(&rfkill_task.dwork, 0);
rfkill_task.last_scheduled = jiffies;
} else
rfkill_schedule_ratelimited();
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
spin_unlock_irqrestore(&rfkill_task.lock, flags);
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
#ifdef RFKILL_NEED_SWSET
/* Use this if you need to add EV_SW SW_WLAN/WWAN/BLUETOOTH/etc handling */
static void rfkill_schedule_set(enum rfkill_type type,
enum rfkill_state desired_state)
{
unsigned long flags;
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
if (rfkill_is_epo_lock_active())
return;
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
spin_lock_irqsave(&rfkill_task.lock, flags);
if (!rfkill_task.global_op_pending) {
set_bit(type, rfkill_task.sw_pending);
set_bit(type, rfkill_task.sw_setpending);
clear_bit(type, rfkill_task.sw_togglestate);
if (desired_state)
set_bit(type, rfkill_task.sw_newstate);
else
clear_bit(type, rfkill_task.sw_newstate);
2008-10-09 17:15:33 -04:00
rfkill_schedule_ratelimited();
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
spin_unlock_irqrestore(&rfkill_task.lock, flags);
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
#endif
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
static void rfkill_schedule_toggle(enum rfkill_type type)
{
unsigned long flags;
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
if (rfkill_is_epo_lock_active())
return;
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
spin_lock_irqsave(&rfkill_task.lock, flags);
if (!rfkill_task.global_op_pending) {
set_bit(type, rfkill_task.sw_pending);
change_bit(type, rfkill_task.sw_togglestate);
2008-10-09 17:15:33 -04:00
rfkill_schedule_ratelimited();
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
spin_unlock_irqrestore(&rfkill_task.lock, flags);
}
static void rfkill_schedule_evsw_rfkillall(int state)
{
if (state) {
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
switch (rfkill_master_switch_mode) {
case RFKILL_INPUT_MASTER_UNBLOCKALL:
rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNBLOCK);
break;
case RFKILL_INPUT_MASTER_RESTORE:
rfkill_schedule_global_op(RFKILL_GLOBAL_OP_RESTORE);
break;
case RFKILL_INPUT_MASTER_DONOTHING:
rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNLOCK);
break;
default:
/* memory corruption or driver bug! fail safely */
rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO);
WARN(1, "Unknown rfkill_master_switch_mode (%d), "
"driver bug or memory corruption detected!\n",
rfkill_master_switch_mode);
break;
}
} else
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO);
}
static void rfkill_event(struct input_handle *handle, unsigned int type,
unsigned int code, int data)
{
if (type == EV_KEY && data == 1) {
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
enum rfkill_type t;
switch (code) {
case KEY_WLAN:
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
t = RFKILL_TYPE_WLAN;
break;
case KEY_BLUETOOTH:
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
t = RFKILL_TYPE_BLUETOOTH;
break;
case KEY_UWB:
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
t = RFKILL_TYPE_UWB;
break;
case KEY_WIMAX:
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
t = RFKILL_TYPE_WIMAX;
break;
default:
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
return;
}
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
rfkill_schedule_toggle(t);
return;
} else if (type == EV_SW) {
switch (code) {
case SW_RFKILL_ALL:
rfkill_schedule_evsw_rfkillall(data);
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
return;
default:
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
return;
}
}
}
static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
const struct input_device_id *id)
{
struct input_handle *handle;
int error;
handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
if (!handle)
return -ENOMEM;
handle->dev = dev;
handle->handler = handler;
handle->name = "rfkill";
/* causes rfkill_start() to be called */
error = input_register_handle(handle);
if (error)
goto err_free_handle;
error = input_open_device(handle);
if (error)
goto err_unregister_handle;
return 0;
err_unregister_handle:
input_unregister_handle(handle);
err_free_handle:
kfree(handle);
return error;
}
static void rfkill_start(struct input_handle *handle)
{
/* Take event_lock to guard against configuration changes, we
* should be able to deal with concurrency with rfkill_event()
* just fine (which event_lock will also avoid). */
spin_lock_irq(&handle->dev->event_lock);
if (test_bit(EV_SW, handle->dev->evbit)) {
if (test_bit(SW_RFKILL_ALL, handle->dev->swbit))
rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL,
handle->dev->sw));
/* add resync for further EV_SW events here */
}
spin_unlock_irq(&handle->dev->event_lock);
}
static void rfkill_disconnect(struct input_handle *handle)
{
input_close_device(handle);
input_unregister_handle(handle);
kfree(handle);
}
static const struct input_device_id rfkill_ids[] = {
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) },
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) },
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) },
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) },
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT,
.evbit = { BIT(EV_SW) },
.swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) },
},
{ }
};
static struct input_handler rfkill_handler = {
.event = rfkill_event,
.connect = rfkill_connect,
.disconnect = rfkill_disconnect,
.start = rfkill_start,
.name = "rfkill",
.id_table = rfkill_ids,
};
static int __init rfkill_handler_init(void)
{
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
if (rfkill_master_switch_mode >= RFKILL_INPUT_MASTER_MAX)
return -EINVAL;
2008-10-09 17:15:33 -04:00
/*
* The penalty to not doing this is a possible RFKILL_OPS_DELAY delay
* at the first use. Acceptable, but if we can avoid it, why not?
*/
rfkill_task.last_scheduled =
jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1;
return input_register_handler(&rfkill_handler);
}
static void __exit rfkill_handler_exit(void)
{
input_unregister_handler(&rfkill_handler);
2008-10-09 17:15:33 -04:00
cancel_delayed_work_sync(&rfkill_task.dwork);
rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_<radio type> or SW_<radio type> events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-09 20:49:33 -04:00
rfkill_remove_epo_lock();
}
module_init(rfkill_handler_init);
module_exit(rfkill_handler_exit);