2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* SMP support for power macintosh.
|
|
|
|
*
|
|
|
|
* We support both the old "powersurge" SMP architecture
|
|
|
|
* and the current Core99 (G4 PowerMac) machines.
|
|
|
|
*
|
|
|
|
* Note that we don't support the very first rev. of
|
|
|
|
* Apple/DayStar 2 CPUs board, the one with the funky
|
|
|
|
* watchdog. Hopefully, none of these should be there except
|
|
|
|
* maybe internally to Apple. I should probably still add some
|
|
|
|
* code to detect this card though and disable SMP. --BenH.
|
|
|
|
*
|
|
|
|
* Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
|
|
|
|
* and Ben Herrenschmidt <benh@kernel.crashing.org>.
|
|
|
|
*
|
|
|
|
* Support for DayStar quad CPU cards
|
|
|
|
* Copyright (C) XLR8, Inc. 1994-2000
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version
|
|
|
|
* 2 of the License, or (at your option) any later version.
|
|
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/smp.h>
|
|
|
|
#include <linux/smp_lock.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/kernel_stat.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/hardirq.h>
|
|
|
|
|
|
|
|
#include <asm/ptrace.h>
|
|
|
|
#include <asm/atomic.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/page.h>
|
|
|
|
#include <asm/pgtable.h>
|
|
|
|
#include <asm/sections.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/prom.h>
|
|
|
|
#include <asm/smp.h>
|
|
|
|
#include <asm/residual.h>
|
|
|
|
#include <asm/machdep.h>
|
|
|
|
#include <asm/pmac_feature.h>
|
|
|
|
#include <asm/time.h>
|
|
|
|
#include <asm/open_pic.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include <asm/keylargo.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Powersurge (old powermac SMP) support.
|
|
|
|
*/
|
|
|
|
|
|
|
|
extern void __secondary_start_psurge(void);
|
|
|
|
extern void __secondary_start_psurge2(void); /* Temporary horrible hack */
|
|
|
|
extern void __secondary_start_psurge3(void); /* Temporary horrible hack */
|
|
|
|
|
|
|
|
/* Addresses for powersurge registers */
|
|
|
|
#define HAMMERHEAD_BASE 0xf8000000
|
|
|
|
#define HHEAD_CONFIG 0x90
|
|
|
|
#define HHEAD_SEC_INTR 0xc0
|
|
|
|
|
|
|
|
/* register for interrupting the primary processor on the powersurge */
|
|
|
|
/* N.B. this is actually the ethernet ROM! */
|
|
|
|
#define PSURGE_PRI_INTR 0xf3019000
|
|
|
|
|
|
|
|
/* register for storing the start address for the secondary processor */
|
|
|
|
/* N.B. this is the PCI config space address register for the 1st bridge */
|
|
|
|
#define PSURGE_START 0xf2800000
|
|
|
|
|
|
|
|
/* Daystar/XLR8 4-CPU card */
|
|
|
|
#define PSURGE_QUAD_REG_ADDR 0xf8800000
|
|
|
|
|
|
|
|
#define PSURGE_QUAD_IRQ_SET 0
|
|
|
|
#define PSURGE_QUAD_IRQ_CLR 1
|
|
|
|
#define PSURGE_QUAD_IRQ_PRIMARY 2
|
|
|
|
#define PSURGE_QUAD_CKSTOP_CTL 3
|
|
|
|
#define PSURGE_QUAD_PRIMARY_ARB 4
|
|
|
|
#define PSURGE_QUAD_BOARD_ID 6
|
|
|
|
#define PSURGE_QUAD_WHICH_CPU 7
|
|
|
|
#define PSURGE_QUAD_CKSTOP_RDBK 8
|
|
|
|
#define PSURGE_QUAD_RESET_CTL 11
|
|
|
|
|
|
|
|
#define PSURGE_QUAD_OUT(r, v) (out_8(quad_base + ((r) << 4) + 4, (v)))
|
|
|
|
#define PSURGE_QUAD_IN(r) (in_8(quad_base + ((r) << 4) + 4) & 0x0f)
|
|
|
|
#define PSURGE_QUAD_BIS(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
|
|
|
|
#define PSURGE_QUAD_BIC(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
|
|
|
|
|
|
|
|
/* virtual addresses for the above */
|
2005-04-24 17:58:08 -04:00
|
|
|
static volatile u8 __iomem *hhead_base;
|
|
|
|
static volatile u8 __iomem *quad_base;
|
|
|
|
static volatile u32 __iomem *psurge_pri_intr;
|
|
|
|
static volatile u8 __iomem *psurge_sec_intr;
|
|
|
|
static volatile u32 __iomem *psurge_start;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* values for psurge_type */
|
|
|
|
#define PSURGE_NONE -1
|
|
|
|
#define PSURGE_DUAL 0
|
|
|
|
#define PSURGE_QUAD_OKEE 1
|
|
|
|
#define PSURGE_QUAD_COTTON 2
|
|
|
|
#define PSURGE_QUAD_ICEGRASS 3
|
|
|
|
|
|
|
|
/* what sort of powersurge board we have */
|
|
|
|
static int psurge_type = PSURGE_NONE;
|
|
|
|
|
|
|
|
/* L2 and L3 cache settings to pass from CPU0 to CPU1 */
|
|
|
|
volatile static long int core99_l2_cache;
|
|
|
|
volatile static long int core99_l3_cache;
|
|
|
|
|
|
|
|
/* Timebase freeze GPIO */
|
|
|
|
static unsigned int core99_tb_gpio;
|
|
|
|
|
|
|
|
/* Sync flag for HW tb sync */
|
|
|
|
static volatile int sec_tb_reset = 0;
|
2005-04-16 18:24:16 -04:00
|
|
|
static unsigned int pri_tb_hi, pri_tb_lo;
|
|
|
|
static unsigned int pri_tb_stamp;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
static void __init core99_init_caches(int cpu)
|
|
|
|
{
|
|
|
|
if (!cpu_has_feature(CPU_FTR_L2CR))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (cpu == 0) {
|
|
|
|
core99_l2_cache = _get_L2CR();
|
|
|
|
printk("CPU0: L2CR is %lx\n", core99_l2_cache);
|
|
|
|
} else {
|
|
|
|
printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
|
|
|
|
_set_L2CR(0);
|
|
|
|
_set_L2CR(core99_l2_cache);
|
|
|
|
printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!cpu_has_feature(CPU_FTR_L3CR))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (cpu == 0){
|
|
|
|
core99_l3_cache = _get_L3CR();
|
|
|
|
printk("CPU0: L3CR is %lx\n", core99_l3_cache);
|
|
|
|
} else {
|
|
|
|
printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
|
|
|
|
_set_L3CR(0);
|
|
|
|
_set_L3CR(core99_l3_cache);
|
|
|
|
printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set and clear IPIs for powersurge.
|
|
|
|
*/
|
|
|
|
static inline void psurge_set_ipi(int cpu)
|
|
|
|
{
|
|
|
|
if (psurge_type == PSURGE_NONE)
|
|
|
|
return;
|
|
|
|
if (cpu == 0)
|
|
|
|
in_be32(psurge_pri_intr);
|
|
|
|
else if (psurge_type == PSURGE_DUAL)
|
|
|
|
out_8(psurge_sec_intr, 0);
|
|
|
|
else
|
|
|
|
PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void psurge_clr_ipi(int cpu)
|
|
|
|
{
|
|
|
|
if (cpu > 0) {
|
|
|
|
switch(psurge_type) {
|
|
|
|
case PSURGE_DUAL:
|
|
|
|
out_8(psurge_sec_intr, ~0);
|
|
|
|
case PSURGE_NONE:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* On powersurge (old SMP powermac architecture) we don't have
|
|
|
|
* separate IPIs for separate messages like openpic does. Instead
|
|
|
|
* we have a bitmap for each processor, where a 1 bit means that
|
|
|
|
* the corresponding message is pending for that processor.
|
|
|
|
* Ideally each cpu's entry would be in a different cache line.
|
|
|
|
* -- paulus.
|
|
|
|
*/
|
|
|
|
static unsigned long psurge_smp_message[NR_CPUS];
|
|
|
|
|
|
|
|
void __pmac psurge_smp_message_recv(struct pt_regs *regs)
|
|
|
|
{
|
|
|
|
int cpu = smp_processor_id();
|
|
|
|
int msg;
|
|
|
|
|
|
|
|
/* clear interrupt */
|
|
|
|
psurge_clr_ipi(cpu);
|
|
|
|
|
|
|
|
if (num_online_cpus() < 2)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* make sure there is a message there */
|
|
|
|
for (msg = 0; msg < 4; msg++)
|
|
|
|
if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
|
|
|
|
smp_message_recv(msg, regs);
|
|
|
|
}
|
|
|
|
|
|
|
|
irqreturn_t __pmac psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
|
|
|
|
{
|
|
|
|
psurge_smp_message_recv(regs);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __pmac smp_psurge_message_pass(int target, int msg, unsigned long data,
|
|
|
|
int wait)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (num_online_cpus() < 2)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0; i < NR_CPUS; i++) {
|
|
|
|
if (!cpu_online(i))
|
|
|
|
continue;
|
|
|
|
if (target == MSG_ALL
|
|
|
|
|| (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
|
|
|
|
|| target == i) {
|
|
|
|
set_bit(msg, &psurge_smp_message[i]);
|
|
|
|
psurge_set_ipi(i);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Determine a quad card presence. We read the board ID register, we
|
|
|
|
* force the data bus to change to something else, and we read it again.
|
|
|
|
* It it's stable, then the register probably exist (ugh !)
|
|
|
|
*/
|
|
|
|
static int __init psurge_quad_probe(void)
|
|
|
|
{
|
|
|
|
int type;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
|
|
|
|
if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
|
|
|
|
|| type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
|
|
|
|
return PSURGE_DUAL;
|
|
|
|
|
|
|
|
/* looks OK, try a slightly more rigorous test */
|
|
|
|
/* bogus is not necessarily cacheline-aligned,
|
|
|
|
though I don't suppose that really matters. -- paulus */
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
|
|
volatile u32 bogus[8];
|
|
|
|
bogus[(0+i)%8] = 0x00000000;
|
|
|
|
bogus[(1+i)%8] = 0x55555555;
|
|
|
|
bogus[(2+i)%8] = 0xFFFFFFFF;
|
|
|
|
bogus[(3+i)%8] = 0xAAAAAAAA;
|
|
|
|
bogus[(4+i)%8] = 0x33333333;
|
|
|
|
bogus[(5+i)%8] = 0xCCCCCCCC;
|
|
|
|
bogus[(6+i)%8] = 0xCCCCCCCC;
|
|
|
|
bogus[(7+i)%8] = 0x33333333;
|
|
|
|
wmb();
|
|
|
|
asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
|
|
|
|
mb();
|
|
|
|
if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
|
|
|
|
return PSURGE_DUAL;
|
|
|
|
}
|
|
|
|
return type;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init psurge_quad_init(void)
|
|
|
|
{
|
|
|
|
int procbits;
|
|
|
|
|
|
|
|
if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
|
|
|
|
procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
|
|
|
|
if (psurge_type == PSURGE_QUAD_ICEGRASS)
|
|
|
|
PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
|
|
|
|
else
|
|
|
|
PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
|
|
|
|
mdelay(33);
|
|
|
|
out_8(psurge_sec_intr, ~0);
|
|
|
|
PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
|
|
|
|
PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
|
|
|
|
if (psurge_type != PSURGE_QUAD_ICEGRASS)
|
|
|
|
PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
|
|
|
|
PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
|
|
|
|
mdelay(33);
|
|
|
|
PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
|
|
|
|
mdelay(33);
|
|
|
|
PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
|
|
|
|
mdelay(33);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init smp_psurge_probe(void)
|
|
|
|
{
|
|
|
|
int i, ncpus;
|
|
|
|
|
|
|
|
/* We don't do SMP on the PPC601 -- paulus */
|
|
|
|
if (PVR_VER(mfspr(SPRN_PVR)) == 1)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The powersurge cpu board can be used in the generation
|
|
|
|
* of powermacs that have a socket for an upgradeable cpu card,
|
|
|
|
* including the 7500, 8500, 9500, 9600.
|
|
|
|
* The device tree doesn't tell you if you have 2 cpus because
|
|
|
|
* OF doesn't know anything about the 2nd processor.
|
|
|
|
* Instead we look for magic bits in magic registers,
|
|
|
|
* in the hammerhead memory controller in the case of the
|
|
|
|
* dual-cpu powersurge board. -- paulus.
|
|
|
|
*/
|
|
|
|
if (find_devices("hammerhead") == NULL)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
|
|
|
|
quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
|
|
|
|
psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
|
|
|
|
|
|
|
|
psurge_type = psurge_quad_probe();
|
|
|
|
if (psurge_type != PSURGE_DUAL) {
|
|
|
|
psurge_quad_init();
|
|
|
|
/* All released cards using this HW design have 4 CPUs */
|
|
|
|
ncpus = 4;
|
|
|
|
} else {
|
2005-04-24 17:58:08 -04:00
|
|
|
iounmap(quad_base);
|
2005-04-16 18:20:36 -04:00
|
|
|
if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
|
|
|
|
/* not a dual-cpu card */
|
2005-04-24 17:58:08 -04:00
|
|
|
iounmap(hhead_base);
|
2005-04-16 18:20:36 -04:00
|
|
|
psurge_type = PSURGE_NONE;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
ncpus = 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
psurge_start = ioremap(PSURGE_START, 4);
|
|
|
|
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
|
|
|
|
|
|
|
|
/* this is not actually strictly necessary -- paulus. */
|
|
|
|
for (i = 1; i < ncpus; ++i)
|
|
|
|
smp_hw_index[i] = i;
|
|
|
|
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
|
|
|
|
|
|
|
|
return ncpus;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init smp_psurge_kick_cpu(int nr)
|
|
|
|
{
|
|
|
|
void (*start)(void) = __secondary_start_psurge;
|
|
|
|
unsigned long a;
|
|
|
|
|
|
|
|
/* may need to flush here if secondary bats aren't setup */
|
|
|
|
for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
|
|
|
|
asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
|
|
|
|
asm volatile("sync");
|
|
|
|
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
|
|
|
|
|
|
|
|
/* setup entry point of secondary processor */
|
|
|
|
switch (nr) {
|
|
|
|
case 2:
|
|
|
|
start = __secondary_start_psurge2;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
start = __secondary_start_psurge3;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
out_be32(psurge_start, __pa(start));
|
|
|
|
mb();
|
|
|
|
|
|
|
|
psurge_set_ipi(nr);
|
|
|
|
udelay(10);
|
|
|
|
psurge_clr_ipi(nr);
|
|
|
|
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* With the dual-cpu powersurge board, the decrementers and timebases
|
|
|
|
* of both cpus are frozen after the secondary cpu is started up,
|
|
|
|
* until we give the secondary cpu another interrupt. This routine
|
|
|
|
* uses this to get the timebases synchronized.
|
|
|
|
* -- paulus.
|
|
|
|
*/
|
|
|
|
static void __init psurge_dual_sync_tb(int cpu_nr)
|
|
|
|
{
|
|
|
|
int t;
|
|
|
|
|
|
|
|
set_dec(tb_ticks_per_jiffy);
|
|
|
|
set_tb(0, 0);
|
|
|
|
last_jiffy_stamp(cpu_nr) = 0;
|
|
|
|
|
|
|
|
if (cpu_nr > 0) {
|
|
|
|
mb();
|
|
|
|
sec_tb_reset = 1;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* wait for the secondary to have reset its TB before proceeding */
|
|
|
|
for (t = 10000000; t > 0 && !sec_tb_reset; --t)
|
|
|
|
;
|
|
|
|
|
|
|
|
/* now interrupt the secondary, starting both TBs */
|
|
|
|
psurge_set_ipi(1);
|
|
|
|
|
|
|
|
smp_tb_synchronized = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irqaction psurge_irqaction = {
|
|
|
|
.handler = psurge_primary_intr,
|
|
|
|
.flags = SA_INTERRUPT,
|
|
|
|
.mask = CPU_MASK_NONE,
|
|
|
|
.name = "primary IPI",
|
|
|
|
};
|
|
|
|
|
|
|
|
static void __init smp_psurge_setup_cpu(int cpu_nr)
|
|
|
|
{
|
|
|
|
|
|
|
|
if (cpu_nr == 0) {
|
|
|
|
/* If we failed to start the second CPU, we should still
|
|
|
|
* send it an IPI to start the timebase & DEC or we might
|
|
|
|
* have them stuck.
|
|
|
|
*/
|
|
|
|
if (num_online_cpus() < 2) {
|
|
|
|
if (psurge_type == PSURGE_DUAL)
|
|
|
|
psurge_set_ipi(1);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/* reset the entry point so if we get another intr we won't
|
|
|
|
* try to startup again */
|
|
|
|
out_be32(psurge_start, 0x100);
|
|
|
|
if (setup_irq(30, &psurge_irqaction))
|
|
|
|
printk(KERN_ERR "Couldn't get primary IPI interrupt");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (psurge_type == PSURGE_DUAL)
|
|
|
|
psurge_dual_sync_tb(cpu_nr);
|
|
|
|
}
|
|
|
|
|
|
|
|
void __init smp_psurge_take_timebase(void)
|
|
|
|
{
|
|
|
|
/* Dummy implementation */
|
|
|
|
}
|
|
|
|
|
|
|
|
void __init smp_psurge_give_timebase(void)
|
|
|
|
{
|
|
|
|
/* Dummy implementation */
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init smp_core99_probe(void)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_6xx
|
|
|
|
extern int powersave_nap;
|
|
|
|
#endif
|
|
|
|
struct device_node *cpus, *firstcpu;
|
|
|
|
int i, ncpus = 0, boot_cpu = -1;
|
2005-04-16 18:24:16 -04:00
|
|
|
u32 *tbprop = NULL;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
|
|
|
|
cpus = firstcpu = find_type_devices("cpu");
|
|
|
|
while(cpus != NULL) {
|
|
|
|
u32 *regprop = (u32 *)get_property(cpus, "reg", NULL);
|
|
|
|
char *stateprop = (char *)get_property(cpus, "state", NULL);
|
|
|
|
if (regprop != NULL && stateprop != NULL &&
|
|
|
|
!strncmp(stateprop, "running", 7))
|
|
|
|
boot_cpu = *regprop;
|
|
|
|
++ncpus;
|
|
|
|
cpus = cpus->next;
|
|
|
|
}
|
|
|
|
if (boot_cpu == -1)
|
|
|
|
printk(KERN_WARNING "Couldn't detect boot CPU !\n");
|
|
|
|
if (boot_cpu != 0)
|
|
|
|
printk(KERN_WARNING "Boot CPU is %d, unsupported setup !\n", boot_cpu);
|
|
|
|
|
|
|
|
if (machine_is_compatible("MacRISC4")) {
|
|
|
|
extern struct smp_ops_t core99_smp_ops;
|
|
|
|
|
|
|
|
core99_smp_ops.take_timebase = smp_generic_take_timebase;
|
|
|
|
core99_smp_ops.give_timebase = smp_generic_give_timebase;
|
|
|
|
} else {
|
|
|
|
if (firstcpu != NULL)
|
|
|
|
tbprop = (u32 *)get_property(firstcpu, "timebase-enable", NULL);
|
|
|
|
if (tbprop)
|
|
|
|
core99_tb_gpio = *tbprop;
|
|
|
|
else
|
|
|
|
core99_tb_gpio = KL_GPIO_TB_ENABLE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ncpus > 1) {
|
|
|
|
openpic_request_IPIs();
|
|
|
|
for (i = 1; i < ncpus; ++i)
|
|
|
|
smp_hw_index[i] = i;
|
|
|
|
#ifdef CONFIG_6xx
|
|
|
|
powersave_nap = 0;
|
|
|
|
#endif
|
|
|
|
core99_init_caches(0);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ncpus;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init smp_core99_kick_cpu(int nr)
|
|
|
|
{
|
|
|
|
unsigned long save_vector, new_vector;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
volatile unsigned long *vector
|
|
|
|
= ((volatile unsigned long *)(KERNELBASE+0x100));
|
|
|
|
if (nr < 1 || nr > 3)
|
|
|
|
return;
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
local_irq_disable();
|
|
|
|
|
|
|
|
/* Save reset vector */
|
|
|
|
save_vector = *vector;
|
|
|
|
|
|
|
|
/* Setup fake reset vector that does
|
|
|
|
* b __secondary_start_psurge - KERNELBASE
|
|
|
|
*/
|
|
|
|
switch(nr) {
|
|
|
|
case 1:
|
|
|
|
new_vector = (unsigned long)__secondary_start_psurge;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
new_vector = (unsigned long)__secondary_start_psurge2;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
new_vector = (unsigned long)__secondary_start_psurge3;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
*vector = 0x48000002 + new_vector - KERNELBASE;
|
|
|
|
|
|
|
|
/* flush data cache and inval instruction cache */
|
|
|
|
flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
|
|
|
|
|
|
|
|
/* Put some life in our friend */
|
|
|
|
pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
|
|
|
|
|
|
|
|
/* FIXME: We wait a bit for the CPU to take the exception, I should
|
|
|
|
* instead wait for the entry code to set something for me. Well,
|
|
|
|
* ideally, all that crap will be done in prom.c and the CPU left
|
|
|
|
* in a RAM-based wait loop like CHRP.
|
|
|
|
*/
|
|
|
|
mdelay(1);
|
|
|
|
|
|
|
|
/* Restore our exception vector */
|
|
|
|
*vector = save_vector;
|
|
|
|
flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
|
|
|
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init smp_core99_setup_cpu(int cpu_nr)
|
|
|
|
{
|
|
|
|
/* Setup L2/L3 */
|
|
|
|
if (cpu_nr != 0)
|
|
|
|
core99_init_caches(cpu_nr);
|
|
|
|
|
|
|
|
/* Setup openpic */
|
|
|
|
do_openpic_setup_cpu();
|
|
|
|
|
|
|
|
if (cpu_nr == 0) {
|
|
|
|
#ifdef CONFIG_POWER4
|
|
|
|
extern void g5_phy_disable_cpu1(void);
|
|
|
|
|
|
|
|
/* If we didn't start the second CPU, we must take
|
|
|
|
* it off the bus
|
|
|
|
*/
|
|
|
|
if (machine_is_compatible("MacRISC4") &&
|
|
|
|
num_online_cpus() < 2)
|
|
|
|
g5_phy_disable_cpu1();
|
|
|
|
#endif /* CONFIG_POWER4 */
|
|
|
|
if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:24:16 -04:00
|
|
|
/* not __init, called in sleep/wakeup code */
|
|
|
|
void smp_core99_take_timebase(void)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-04-16 18:24:16 -04:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
/* tell the primary we're here */
|
|
|
|
sec_tb_reset = 1;
|
2005-04-16 18:20:36 -04:00
|
|
|
mb();
|
|
|
|
|
2005-04-16 18:24:16 -04:00
|
|
|
/* wait for the primary to set pri_tb_hi/lo */
|
|
|
|
while (sec_tb_reset < 2)
|
|
|
|
mb();
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-04-16 18:24:16 -04:00
|
|
|
/* set our stuff the same as the primary */
|
|
|
|
local_irq_save(flags);
|
|
|
|
set_dec(1);
|
|
|
|
set_tb(pri_tb_hi, pri_tb_lo);
|
|
|
|
last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp;
|
|
|
|
mb();
|
|
|
|
|
|
|
|
/* tell the primary we're done */
|
|
|
|
sec_tb_reset = 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
mb();
|
2005-04-16 18:24:16 -04:00
|
|
|
local_irq_restore(flags);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-04-16 18:24:16 -04:00
|
|
|
/* not __init, called in sleep/wakeup code */
|
|
|
|
void smp_core99_give_timebase(void)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-04-16 18:24:16 -04:00
|
|
|
unsigned long flags;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int t;
|
|
|
|
|
2005-04-16 18:24:16 -04:00
|
|
|
/* wait for the secondary to be in take_timebase */
|
|
|
|
for (t = 100000; t > 0 && !sec_tb_reset; --t)
|
|
|
|
udelay(10);
|
|
|
|
if (!sec_tb_reset) {
|
2005-04-16 18:20:36 -04:00
|
|
|
printk(KERN_WARNING "Timeout waiting sync on second CPU\n");
|
2005-04-16 18:24:16 -04:00
|
|
|
return;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-04-16 18:24:16 -04:00
|
|
|
/* freeze the timebase and read it */
|
|
|
|
/* disable interrupts so the timebase is disabled for the
|
|
|
|
shortest possible time */
|
|
|
|
local_irq_save(flags);
|
|
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
|
|
|
|
pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
|
|
|
|
mb();
|
|
|
|
pri_tb_hi = get_tbu();
|
|
|
|
pri_tb_lo = get_tbl();
|
|
|
|
pri_tb_stamp = last_jiffy_stamp(smp_processor_id());
|
2005-04-16 18:20:36 -04:00
|
|
|
mb();
|
|
|
|
|
2005-04-16 18:24:16 -04:00
|
|
|
/* tell the secondary we're ready */
|
|
|
|
sec_tb_reset = 2;
|
|
|
|
mb();
|
|
|
|
|
|
|
|
/* wait for the secondary to have taken it */
|
|
|
|
for (t = 100000; t > 0 && sec_tb_reset; --t)
|
|
|
|
udelay(10);
|
|
|
|
if (sec_tb_reset)
|
|
|
|
printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n");
|
|
|
|
else
|
|
|
|
smp_tb_synchronized = 1;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* Now, restart the timebase by leaving the GPIO to an open collector */
|
|
|
|
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
|
|
|
|
pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
|
2005-04-16 18:24:16 -04:00
|
|
|
local_irq_restore(flags);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* PowerSurge-style Macs */
|
|
|
|
struct smp_ops_t psurge_smp_ops __pmacdata = {
|
|
|
|
.message_pass = smp_psurge_message_pass,
|
|
|
|
.probe = smp_psurge_probe,
|
|
|
|
.kick_cpu = smp_psurge_kick_cpu,
|
|
|
|
.setup_cpu = smp_psurge_setup_cpu,
|
|
|
|
.give_timebase = smp_psurge_give_timebase,
|
|
|
|
.take_timebase = smp_psurge_take_timebase,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Core99 Macs (dual G4s) */
|
|
|
|
struct smp_ops_t core99_smp_ops __pmacdata = {
|
|
|
|
.message_pass = smp_openpic_message_pass,
|
|
|
|
.probe = smp_core99_probe,
|
|
|
|
.kick_cpu = smp_core99_kick_cpu,
|
|
|
|
.setup_cpu = smp_core99_setup_cpu,
|
|
|
|
.give_timebase = smp_core99_give_timebase,
|
|
|
|
.take_timebase = smp_core99_take_timebase,
|
|
|
|
};
|