lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
10f03f1a24
android_kernel_xiaomi_sm8350/arch/arm/mach-omap2/pm.h

47 lines
1.6 KiB
C
Raw Normal View History

OMAP2/3: PM: push core PM code from linux-omap This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28 13:56:16 -04:00
/*
* OMAP2/3 Power Management Routines
*
* Copyright (C) 2008 Nokia Corporation
* Jouni Hogander
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
OMAP: PM: Add pm-debug counters This patch provides the debugfs entries and a function which will be called by the PM code to register the time spent per domain per state. Also some new fields are added to the powerdomain struct to keep the time information. NOTE: As of v2.6.29, using getnstimeofday() after drivers are suspended is no longer safe since the timekeeping subsystem is also suspended as part of the suspend process. Instead use sched_clock() which on OMAP returns the 32k SYNC timer in nanoseconds. Also, do not print out status for meta powerdomains (dpll*) Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 11:13:48 -04:00
#include <mach/powerdomain.h>
OMAP: PM: Added suspend target state control to debugfs for OMAP3 Target state can be read / programmed via files under: [debugfs]/pm_debug/[pwrdm]/suspend Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-11-26 05:26:24 -05:00
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
OMAP2/3: PM: push core PM code from linux-omap This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28 13:56:16 -04:00
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
OMAP: PM: Add pm-debug counters This patch provides the debugfs entries and a function which will be called by the PM code to register the time spent per domain per state. Also some new fields are added to the powerdomain struct to keep the time information. NOTE: As of v2.6.29, using getnstimeofday() after drivers are suspended is no longer safe since the timekeeping subsystem is also suspended as part of the suspend process. Instead use sched_clock() which on OMAP returns the 32k SYNC timer in nanoseconds. Also, do not print out status for meta powerdomains (dpll*) Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 11:13:48 -04:00
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
OMAP: PM debug: Add PRCM register dump support Allows dumping out current register contents from the debug filesystem, and also allows user to add arbitrary register save points into code. Current register contents are available under debugfs at: [debugfs]/pm_debug/registers/current To add a save point, do following: From module init (or somewhere before the save call, called only once): pm_dbg_init_regset(n); // n=1..4, allocates memory for dump area #n From arbitrary code location: pm_dbg_regset_save(n); // n=1..4, saves registers to dump area #n After this, the register dump can be seen under [debugfs]/pm_debug/registers/n Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-29 07:31:24 -04:00
extern int pm_dbg_regset_save(int reg_set);
extern int pm_dbg_regset_init(int reg_set);
OMAP2/3: PM: push core PM code from linux-omap This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28 13:56:16 -04:00
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_debug 0
OMAP: PM: Add pm-debug counters This patch provides the debugfs entries and a function which will be called by the PM code to register the time spent per domain per state. Also some new fields are added to the powerdomain struct to keep the time information. NOTE: As of v2.6.29, using getnstimeofday() after drivers are suspended is no longer safe since the timekeeping subsystem is also suspended as part of the suspend process. Instead use sched_clock() which on OMAP returns the 32k SYNC timer in nanoseconds. Also, do not print out status for meta powerdomains (dpll*) Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 11:13:48 -04:00
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
OMAP: PM debug: Add PRCM register dump support Allows dumping out current register contents from the debug filesystem, and also allows user to add arbitrary register save points into code. Current register contents are available under debugfs at: [debugfs]/pm_debug/registers/current To add a save point, do following: From module init (or somewhere before the save call, called only once): pm_dbg_init_regset(n); // n=1..4, allocates memory for dump area #n From arbitrary code location: pm_dbg_regset_save(n); // n=1..4, saves registers to dump area #n After this, the register dump can be seen under [debugfs]/pm_debug/registers/n Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-29 07:31:24 -04:00
#define pm_dbg_regset_save(reg_set) do {} while (0);
#define pm_dbg_regset_init(reg_set) do {} while (0);
OMAP2/3: PM: push core PM code from linux-omap This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28 13:56:16 -04:00
#endif /* CONFIG_PM_DEBUG */
extern void omap24xx_idle_loop_suspend(void);
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
extern void save_secure_ram_context(u32 *addr);
extern unsigned int omap24xx_idle_loop_suspend_sz;
extern unsigned int omap34xx_suspend_sz;
extern unsigned int save_secure_ram_context_sz;
extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap34xx_cpu_suspend_sz;
#endif
Reference in New Issue Copy Permalink