2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* linux/arch/arm/kernel/ecard.c
|
|
|
|
*
|
|
|
|
* Copyright 1995-2001 Russell King
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* Find all installed expansion cards, and handle interrupts from them.
|
|
|
|
*
|
|
|
|
* Created from information from Acorns RiscOS3 PRMs
|
|
|
|
*
|
|
|
|
* 08-Dec-1996 RMK Added code for the 9'th expansion card - the ether
|
|
|
|
* podule slot.
|
|
|
|
* 06-May-1997 RMK Added blacklist for cards whose loader doesn't work.
|
|
|
|
* 12-Sep-1997 RMK Created new handling of interrupt enables/disables
|
|
|
|
* - cards can now register their own routine to control
|
|
|
|
* interrupts (recommended).
|
|
|
|
* 29-Sep-1997 RMK Expansion card interrupt hardware not being re-enabled
|
|
|
|
* on reset from Linux. (Caused cards not to respond
|
|
|
|
* under RiscOS without hard reset).
|
|
|
|
* 15-Feb-1998 RMK Added DMA support
|
|
|
|
* 12-Sep-1998 RMK Added EASI support
|
|
|
|
* 10-Jan-1999 RMK Run loaders in a simulated RISC OS environment.
|
|
|
|
* 17-Apr-1999 RMK Support for EASI Type C cycles.
|
|
|
|
*/
|
|
|
|
#define ECARD_C
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/completion.h>
|
|
|
|
#include <linux/reboot.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/proc_fs.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/init.h>
|
2006-01-12 13:42:23 -05:00
|
|
|
#include <linux/mutex.h>
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
#include <asm/dma.h>
|
|
|
|
#include <asm/ecard.h>
|
|
|
|
#include <asm/hardware.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mmu_context.h>
|
|
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/tlbflush.h>
|
|
|
|
|
|
|
|
#ifndef CONFIG_ARCH_RPC
|
|
|
|
#define HAVE_EXPMASK
|
|
|
|
#endif
|
|
|
|
|
|
|
|
struct ecard_request {
|
|
|
|
void (*fn)(struct ecard_request *);
|
|
|
|
ecard_t *ec;
|
|
|
|
unsigned int address;
|
|
|
|
unsigned int length;
|
|
|
|
unsigned int use_loader;
|
|
|
|
void *buffer;
|
|
|
|
struct completion *complete;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct expcard_blacklist {
|
|
|
|
unsigned short manufacturer;
|
|
|
|
unsigned short product;
|
|
|
|
const char *type;
|
|
|
|
};
|
|
|
|
|
|
|
|
static ecard_t *cards;
|
|
|
|
static ecard_t *slot_to_expcard[MAX_ECARDS];
|
|
|
|
static unsigned int ectcr;
|
|
|
|
#ifdef HAS_EXPMASK
|
|
|
|
static unsigned int have_expmask;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* List of descriptions of cards which don't have an extended
|
|
|
|
* identification, or chunk directories containing a description.
|
|
|
|
*/
|
|
|
|
static struct expcard_blacklist __initdata blacklist[] = {
|
|
|
|
{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }
|
|
|
|
};
|
|
|
|
|
|
|
|
asmlinkage extern int
|
|
|
|
ecard_loader_reset(unsigned long base, loader_t loader);
|
|
|
|
asmlinkage extern int
|
|
|
|
ecard_loader_read(int off, unsigned long base, loader_t loader);
|
|
|
|
|
|
|
|
static inline unsigned short ecard_getu16(unsigned char *v)
|
|
|
|
{
|
|
|
|
return v[0] | v[1] << 8;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline signed long ecard_gets24(unsigned char *v)
|
|
|
|
{
|
|
|
|
return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline ecard_t *slot_to_ecard(unsigned int slot)
|
|
|
|
{
|
|
|
|
return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ===================== Expansion card daemon ======================== */
|
|
|
|
/*
|
|
|
|
* Since the loader programs on the expansion cards need to be run
|
|
|
|
* in a specific environment, create a separate task with this
|
|
|
|
* environment up, and pass requests to this task as and when we
|
|
|
|
* need to.
|
|
|
|
*
|
|
|
|
* This should allow 99% of loaders to be called from Linux.
|
|
|
|
*
|
|
|
|
* From a security standpoint, we trust the card vendors. This
|
|
|
|
* may be a misplaced trust.
|
|
|
|
*/
|
|
|
|
static void ecard_task_reset(struct ecard_request *req)
|
|
|
|
{
|
|
|
|
struct expansion_card *ec = req->ec;
|
|
|
|
struct resource *res;
|
|
|
|
|
|
|
|
res = ec->slot_no == 8
|
|
|
|
? &ec->resource[ECARD_RES_MEMC]
|
|
|
|
: ec->type == ECARD_EASI
|
|
|
|
? &ec->resource[ECARD_RES_EASI]
|
|
|
|
: &ec->resource[ECARD_RES_IOCSYNC];
|
|
|
|
|
|
|
|
ecard_loader_reset(res->start, ec->loader);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ecard_task_readbytes(struct ecard_request *req)
|
|
|
|
{
|
|
|
|
struct expansion_card *ec = req->ec;
|
|
|
|
unsigned char *buf = req->buffer;
|
|
|
|
unsigned int len = req->length;
|
|
|
|
unsigned int off = req->address;
|
|
|
|
|
|
|
|
if (ec->slot_no == 8) {
|
|
|
|
void __iomem *base = (void __iomem *)
|
|
|
|
ec->resource[ECARD_RES_MEMC].start;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The card maintains an index which increments the address
|
|
|
|
* into a 4096-byte page on each access. We need to keep
|
|
|
|
* track of the counter.
|
|
|
|
*/
|
|
|
|
static unsigned int index;
|
|
|
|
unsigned int page;
|
|
|
|
|
|
|
|
page = (off >> 12) * 4;
|
|
|
|
if (page > 256 * 4)
|
|
|
|
return;
|
|
|
|
|
|
|
|
off &= 4095;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we are reading offset 0, or our current index is
|
|
|
|
* greater than the offset, reset the hardware index counter.
|
|
|
|
*/
|
|
|
|
if (off == 0 || index > off) {
|
|
|
|
writeb(0, base);
|
|
|
|
index = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Increment the hardware index counter until we get to the
|
|
|
|
* required offset. The read bytes are discarded.
|
|
|
|
*/
|
|
|
|
while (index < off) {
|
|
|
|
readb(base + page);
|
|
|
|
index += 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (len--) {
|
|
|
|
*buf++ = readb(base + page);
|
|
|
|
index += 1;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
unsigned long base = (ec->type == ECARD_EASI
|
|
|
|
? &ec->resource[ECARD_RES_EASI]
|
|
|
|
: &ec->resource[ECARD_RES_IOCSYNC])->start;
|
|
|
|
void __iomem *pbase = (void __iomem *)base;
|
|
|
|
|
|
|
|
if (!req->use_loader || !ec->loader) {
|
|
|
|
off *= 4;
|
|
|
|
while (len--) {
|
|
|
|
*buf++ = readb(pbase + off);
|
|
|
|
off += 4;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
while(len--) {
|
|
|
|
/*
|
|
|
|
* The following is required by some
|
|
|
|
* expansion card loader programs.
|
|
|
|
*/
|
|
|
|
*(unsigned long *)0x108 = 0;
|
|
|
|
*buf++ = ecard_loader_read(off++, base,
|
|
|
|
ec->loader);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
|
|
|
|
static struct ecard_request *ecard_req;
|
2006-01-12 13:42:23 -05:00
|
|
|
static DEFINE_MUTEX(ecard_mutex);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Set up the expansion card daemon's page tables.
|
|
|
|
*/
|
|
|
|
static void ecard_init_pgtables(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
struct vm_area_struct vma;
|
|
|
|
|
|
|
|
/* We want to set up the page tables for the following mapping:
|
|
|
|
* Virtual Physical
|
|
|
|
* 0x03000000 0x03000000
|
|
|
|
* 0x03010000 unmapped
|
|
|
|
* 0x03210000 0x03210000
|
|
|
|
* 0x03400000 unmapped
|
|
|
|
* 0x08000000 0x08000000
|
|
|
|
* 0x10000000 unmapped
|
|
|
|
*
|
|
|
|
* FIXME: we don't follow this 100% yet.
|
|
|
|
*/
|
|
|
|
pgd_t *src_pgd, *dst_pgd;
|
|
|
|
|
|
|
|
src_pgd = pgd_offset(mm, (unsigned long)IO_BASE);
|
|
|
|
dst_pgd = pgd_offset(mm, IO_START);
|
|
|
|
|
|
|
|
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
|
|
|
|
|
|
|
|
src_pgd = pgd_offset(mm, EASI_BASE);
|
|
|
|
dst_pgd = pgd_offset(mm, EASI_START);
|
|
|
|
|
|
|
|
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
|
|
|
|
|
|
|
|
vma.vm_mm = mm;
|
|
|
|
|
|
|
|
flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
|
|
|
|
flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ecard_init_mm(void)
|
|
|
|
{
|
|
|
|
struct mm_struct * mm = mm_alloc();
|
|
|
|
struct mm_struct *active_mm = current->active_mm;
|
|
|
|
|
|
|
|
if (!mm)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
current->mm = mm;
|
|
|
|
current->active_mm = mm;
|
|
|
|
activate_mm(active_mm, mm);
|
|
|
|
mmdrop(active_mm);
|
|
|
|
ecard_init_pgtables(mm);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ecard_task(void * unused)
|
|
|
|
{
|
|
|
|
daemonize("kecardd");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocate a mm. We're not a lazy-TLB kernel task since we need
|
|
|
|
* to set page table entries where the user space would be. Note
|
|
|
|
* that this also creates the page tables. Failure is not an
|
|
|
|
* option here.
|
|
|
|
*/
|
|
|
|
if (ecard_init_mm())
|
|
|
|
panic("kecardd: unable to alloc mm\n");
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
struct ecard_request *req;
|
|
|
|
|
|
|
|
wait_event_interruptible(ecard_wait, ecard_req != NULL);
|
|
|
|
|
|
|
|
req = xchg(&ecard_req, NULL);
|
|
|
|
if (req != NULL) {
|
|
|
|
req->fn(req);
|
|
|
|
complete(req->complete);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Wake the expansion card daemon to action our request.
|
|
|
|
*
|
|
|
|
* FIXME: The test here is not sufficient to detect if the
|
|
|
|
* kcardd is running.
|
|
|
|
*/
|
|
|
|
static void ecard_call(struct ecard_request *req)
|
|
|
|
{
|
2006-10-01 02:28:10 -04:00
|
|
|
DECLARE_COMPLETION_ONSTACK(completion);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
req->complete = &completion;
|
|
|
|
|
2006-01-12 13:42:23 -05:00
|
|
|
mutex_lock(&ecard_mutex);
|
2005-04-16 18:20:36 -04:00
|
|
|
ecard_req = req;
|
|
|
|
wake_up(&ecard_wait);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Now wait for kecardd to run.
|
|
|
|
*/
|
|
|
|
wait_for_completion(&completion);
|
2006-01-12 13:42:23 -05:00
|
|
|
mutex_unlock(&ecard_mutex);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* ======================= Mid-level card control ===================== */
|
|
|
|
|
|
|
|
static void
|
|
|
|
ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
|
|
|
|
{
|
|
|
|
struct ecard_request req;
|
|
|
|
|
|
|
|
req.fn = ecard_task_readbytes;
|
|
|
|
req.ec = ec;
|
|
|
|
req.address = off;
|
|
|
|
req.length = len;
|
|
|
|
req.use_loader = useld;
|
|
|
|
req.buffer = addr;
|
|
|
|
|
|
|
|
ecard_call(&req);
|
|
|
|
}
|
|
|
|
|
|
|
|
int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
|
|
|
|
{
|
|
|
|
struct ex_chunk_dir excd;
|
|
|
|
int index = 16;
|
|
|
|
int useld = 0;
|
|
|
|
|
|
|
|
if (!ec->cid.cd)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
while(1) {
|
|
|
|
ecard_readbytes(&excd, ec, index, 8, useld);
|
|
|
|
index += 8;
|
|
|
|
if (c_id(&excd) == 0) {
|
|
|
|
if (!useld && ec->loader) {
|
|
|
|
useld = 1;
|
|
|
|
index = 0;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
if (c_id(&excd) == 0xf0) { /* link */
|
|
|
|
index = c_start(&excd);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (c_id(&excd) == 0x80) { /* loader */
|
|
|
|
if (!ec->loader) {
|
|
|
|
ec->loader = (loader_t)kmalloc(c_len(&excd),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (ec->loader)
|
|
|
|
ecard_readbytes(ec->loader, ec,
|
|
|
|
(int)c_start(&excd),
|
|
|
|
c_len(&excd), useld);
|
|
|
|
else
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (c_id(&excd) == id && num-- == 0)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (c_id(&excd) & 0x80) {
|
|
|
|
switch (c_id(&excd) & 0x70) {
|
|
|
|
case 0x70:
|
|
|
|
ecard_readbytes((unsigned char *)excd.d.string, ec,
|
|
|
|
(int)c_start(&excd), c_len(&excd),
|
|
|
|
useld);
|
|
|
|
break;
|
|
|
|
case 0x00:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
cd->start_offset = c_start(&excd);
|
|
|
|
memcpy(cd->d.string, excd.d.string, 256);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ======================= Interrupt control ============================ */
|
|
|
|
|
|
|
|
static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
|
|
|
|
{
|
|
|
|
#ifdef HAS_EXPMASK
|
|
|
|
if (irqnr < 4 && have_expmask) {
|
|
|
|
have_expmask |= 1 << irqnr;
|
|
|
|
__raw_writeb(have_expmask, EXPMASK_ENABLE);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
|
|
|
|
{
|
|
|
|
#ifdef HAS_EXPMASK
|
|
|
|
if (irqnr < 4 && have_expmask) {
|
|
|
|
have_expmask &= ~(1 << irqnr);
|
|
|
|
__raw_writeb(have_expmask, EXPMASK_ENABLE);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ecard_def_irq_pending(ecard_t *ec)
|
|
|
|
{
|
|
|
|
return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr)
|
|
|
|
{
|
|
|
|
panic("ecard_def_fiq_enable called - impossible");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr)
|
|
|
|
{
|
|
|
|
panic("ecard_def_fiq_disable called - impossible");
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ecard_def_fiq_pending(ecard_t *ec)
|
|
|
|
{
|
|
|
|
return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask;
|
|
|
|
}
|
|
|
|
|
|
|
|
static expansioncard_ops_t ecard_default_ops = {
|
|
|
|
ecard_def_irq_enable,
|
|
|
|
ecard_def_irq_disable,
|
|
|
|
ecard_def_irq_pending,
|
|
|
|
ecard_def_fiq_enable,
|
|
|
|
ecard_def_fiq_disable,
|
|
|
|
ecard_def_fiq_pending
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enable and disable interrupts from expansion cards.
|
|
|
|
* (interrupts are disabled for these functions).
|
|
|
|
*
|
|
|
|
* They are not meant to be called directly, but via enable/disable_irq.
|
|
|
|
*/
|
|
|
|
static void ecard_irq_unmask(unsigned int irqnr)
|
|
|
|
{
|
|
|
|
ecard_t *ec = slot_to_ecard(irqnr - 32);
|
|
|
|
|
|
|
|
if (ec) {
|
|
|
|
if (!ec->ops)
|
|
|
|
ec->ops = &ecard_default_ops;
|
|
|
|
|
|
|
|
if (ec->claimed && ec->ops->irqenable)
|
|
|
|
ec->ops->irqenable(ec, irqnr);
|
|
|
|
else
|
|
|
|
printk(KERN_ERR "ecard: rejecting request to "
|
|
|
|
"enable IRQs for %d\n", irqnr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ecard_irq_mask(unsigned int irqnr)
|
|
|
|
{
|
|
|
|
ecard_t *ec = slot_to_ecard(irqnr - 32);
|
|
|
|
|
|
|
|
if (ec) {
|
|
|
|
if (!ec->ops)
|
|
|
|
ec->ops = &ecard_default_ops;
|
|
|
|
|
|
|
|
if (ec->ops && ec->ops->irqdisable)
|
|
|
|
ec->ops->irqdisable(ec, irqnr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2006-08-01 17:26:25 -04:00
|
|
|
static struct irq_chip ecard_chip = {
|
|
|
|
.name = "ECARD",
|
2005-04-16 18:20:36 -04:00
|
|
|
.ack = ecard_irq_mask,
|
|
|
|
.mask = ecard_irq_mask,
|
|
|
|
.unmask = ecard_irq_unmask,
|
|
|
|
};
|
|
|
|
|
|
|
|
void ecard_enablefiq(unsigned int fiqnr)
|
|
|
|
{
|
|
|
|
ecard_t *ec = slot_to_ecard(fiqnr);
|
|
|
|
|
|
|
|
if (ec) {
|
|
|
|
if (!ec->ops)
|
|
|
|
ec->ops = &ecard_default_ops;
|
|
|
|
|
|
|
|
if (ec->claimed && ec->ops->fiqenable)
|
|
|
|
ec->ops->fiqenable(ec, fiqnr);
|
|
|
|
else
|
|
|
|
printk(KERN_ERR "ecard: rejecting request to "
|
|
|
|
"enable FIQs for %d\n", fiqnr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void ecard_disablefiq(unsigned int fiqnr)
|
|
|
|
{
|
|
|
|
ecard_t *ec = slot_to_ecard(fiqnr);
|
|
|
|
|
|
|
|
if (ec) {
|
|
|
|
if (!ec->ops)
|
|
|
|
ec->ops = &ecard_default_ops;
|
|
|
|
|
|
|
|
if (ec->ops->fiqdisable)
|
|
|
|
ec->ops->fiqdisable(ec, fiqnr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ecard_dump_irq_state(void)
|
|
|
|
{
|
|
|
|
ecard_t *ec;
|
|
|
|
|
|
|
|
printk("Expansion card IRQ state:\n");
|
|
|
|
|
|
|
|
for (ec = cards; ec; ec = ec->next) {
|
|
|
|
if (ec->slot_no == 8)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
printk(" %d: %sclaimed, ",
|
|
|
|
ec->slot_no, ec->claimed ? "" : "not ");
|
|
|
|
|
|
|
|
if (ec->ops && ec->ops->irqpending &&
|
|
|
|
ec->ops != &ecard_default_ops)
|
|
|
|
printk("irq %spending\n",
|
|
|
|
ec->ops->irqpending(ec) ? "" : "not ");
|
|
|
|
else
|
|
|
|
printk("irqaddr %p, mask = %02X, status = %02X\n",
|
|
|
|
ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ecard_check_lockup(struct irqdesc *desc)
|
|
|
|
{
|
|
|
|
static unsigned long last;
|
|
|
|
static int lockup;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the timer interrupt has not run since the last million
|
|
|
|
* unrecognised expansion card interrupts, then there is
|
|
|
|
* something seriously wrong. Disable the expansion card
|
|
|
|
* interrupts so at least we can continue.
|
|
|
|
*
|
|
|
|
* Maybe we ought to start a timer to re-enable them some time
|
|
|
|
* later?
|
|
|
|
*/
|
|
|
|
if (last == jiffies) {
|
|
|
|
lockup += 1;
|
|
|
|
if (lockup > 1000000) {
|
|
|
|
printk(KERN_ERR "\nInterrupt lockup detected - "
|
|
|
|
"disabling all expansion card interrupts\n");
|
|
|
|
|
|
|
|
desc->chip->mask(IRQ_EXPANSIONCARD);
|
|
|
|
ecard_dump_irq_state();
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
lockup = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we did not recognise the source of this interrupt,
|
|
|
|
* warn the user, but don't flood the user with these messages.
|
|
|
|
*/
|
|
|
|
if (!last || time_after(jiffies, last + 5*HZ)) {
|
|
|
|
last = jiffies;
|
|
|
|
printk(KERN_WARNING "Unrecognised interrupt from backplane\n");
|
|
|
|
ecard_dump_irq_state();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2006-10-06 13:53:39 -04:00
|
|
|
ecard_irq_handler(unsigned int irq, struct irqdesc *desc)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
ecard_t *ec;
|
|
|
|
int called = 0;
|
|
|
|
|
|
|
|
desc->chip->mask(irq);
|
|
|
|
for (ec = cards; ec; ec = ec->next) {
|
|
|
|
int pending;
|
|
|
|
|
|
|
|
if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (ec->ops && ec->ops->irqpending)
|
|
|
|
pending = ec->ops->irqpending(ec);
|
|
|
|
else
|
|
|
|
pending = ecard_default_ops.irqpending(ec);
|
|
|
|
|
|
|
|
if (pending) {
|
|
|
|
struct irqdesc *d = irq_desc + ec->irq;
|
2006-10-06 13:53:39 -04:00
|
|
|
desc_handle_irq(ec->irq, d);
|
2005-04-16 18:20:36 -04:00
|
|
|
called ++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
desc->chip->unmask(irq);
|
|
|
|
|
|
|
|
if (called == 0)
|
|
|
|
ecard_check_lockup(desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef HAS_EXPMASK
|
|
|
|
static unsigned char priority_masks[] =
|
|
|
|
{
|
|
|
|
0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff
|
|
|
|
};
|
|
|
|
|
|
|
|
static unsigned char first_set[] =
|
|
|
|
{
|
|
|
|
0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00,
|
|
|
|
0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00
|
|
|
|
};
|
|
|
|
|
|
|
|
static void
|
2006-10-06 13:53:39 -04:00
|
|
|
ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
const unsigned int statusmask = 15;
|
|
|
|
unsigned int status;
|
|
|
|
|
|
|
|
status = __raw_readb(EXPMASK_STATUS) & statusmask;
|
|
|
|
if (status) {
|
|
|
|
unsigned int slot = first_set[status];
|
|
|
|
ecard_t *ec = slot_to_ecard(slot);
|
|
|
|
|
|
|
|
if (ec->claimed) {
|
2006-07-01 17:32:36 -04:00
|
|
|
struct irq_desc *d = irq_desc + ec->irq;
|
2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* this ugly code is so that we can operate a
|
|
|
|
* prioritorising system:
|
|
|
|
*
|
|
|
|
* Card 0 highest priority
|
|
|
|
* Card 1
|
|
|
|
* Card 2
|
|
|
|
* Card 3 lowest priority
|
|
|
|
*
|
|
|
|
* Serial cards should go in 0/1, ethernet/scsi in 2/3
|
|
|
|
* otherwise you will lose serial data at high speeds!
|
|
|
|
*/
|
2006-10-06 13:53:39 -04:00
|
|
|
desc_handle_irq(ec->irq, d);
|
2005-04-16 18:20:36 -04:00
|
|
|
} else {
|
|
|
|
printk(KERN_WARNING "card%d: interrupt from unclaimed "
|
|
|
|
"card???\n", slot);
|
|
|
|
have_expmask &= ~(1 << slot);
|
|
|
|
__raw_writeb(have_expmask, EXPMASK_ENABLE);
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
printk(KERN_WARNING "Wild interrupt from backplane (masks)\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init ecard_probeirqhw(void)
|
|
|
|
{
|
|
|
|
ecard_t *ec;
|
|
|
|
int found;
|
|
|
|
|
|
|
|
__raw_writeb(0x00, EXPMASK_ENABLE);
|
|
|
|
__raw_writeb(0xff, EXPMASK_STATUS);
|
|
|
|
found = (__raw_readb(EXPMASK_STATUS) & 15) == 0;
|
|
|
|
__raw_writeb(0xff, EXPMASK_ENABLE);
|
|
|
|
|
|
|
|
if (found) {
|
|
|
|
printk(KERN_DEBUG "Expansion card interrupt "
|
|
|
|
"management hardware found\n");
|
|
|
|
|
|
|
|
/* for each card present, set a bit to '1' */
|
|
|
|
have_expmask = 0x80000000;
|
|
|
|
|
|
|
|
for (ec = cards; ec; ec = ec->next)
|
|
|
|
have_expmask |= 1 << ec->slot_no;
|
|
|
|
|
|
|
|
__raw_writeb(have_expmask, EXPMASK_ENABLE);
|
|
|
|
}
|
|
|
|
|
|
|
|
return found;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define ecard_irqexp_handler NULL
|
|
|
|
#define ecard_probeirqhw() (0)
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef IO_EC_MEMC8_BASE
|
|
|
|
#define IO_EC_MEMC8_BASE 0
|
|
|
|
#endif
|
|
|
|
|
|
|
|
unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
|
|
|
|
{
|
|
|
|
unsigned long address = 0;
|
|
|
|
int slot = ec->slot_no;
|
|
|
|
|
|
|
|
if (ec->slot_no == 8)
|
|
|
|
return IO_EC_MEMC8_BASE;
|
|
|
|
|
|
|
|
ectcr &= ~(1 << slot);
|
|
|
|
|
|
|
|
switch (type) {
|
|
|
|
case ECARD_MEMC:
|
|
|
|
if (slot < 4)
|
|
|
|
address = IO_EC_MEMC_BASE + (slot << 12);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ECARD_IOC:
|
|
|
|
if (slot < 4)
|
|
|
|
address = IO_EC_IOC_BASE + (slot << 12);
|
|
|
|
#ifdef IO_EC_IOC4_BASE
|
|
|
|
else
|
|
|
|
address = IO_EC_IOC4_BASE + ((slot - 4) << 12);
|
|
|
|
#endif
|
|
|
|
if (address)
|
|
|
|
address += speed << 17;
|
|
|
|
break;
|
|
|
|
|
|
|
|
#ifdef IO_EC_EASI_BASE
|
|
|
|
case ECARD_EASI:
|
|
|
|
address = IO_EC_EASI_BASE + (slot << 22);
|
|
|
|
if (speed == ECARD_FAST)
|
|
|
|
ectcr |= 1 << slot;
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef IOMD_ECTCR
|
|
|
|
iomd_writeb(ectcr, IOMD_ECTCR);
|
|
|
|
#endif
|
|
|
|
return address;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ecard_prints(char *buffer, ecard_t *ec)
|
|
|
|
{
|
|
|
|
char *start = buffer;
|
|
|
|
|
|
|
|
buffer += sprintf(buffer, " %d: %s ", ec->slot_no,
|
|
|
|
ec->type == ECARD_EASI ? "EASI" : " ");
|
|
|
|
|
|
|
|
if (ec->cid.id == 0) {
|
|
|
|
struct in_chunk_dir incd;
|
|
|
|
|
|
|
|
buffer += sprintf(buffer, "[%04X:%04X] ",
|
|
|
|
ec->cid.manufacturer, ec->cid.product);
|
|
|
|
|
|
|
|
if (!ec->card_desc && ec->cid.cd &&
|
|
|
|
ecard_readchunk(&incd, ec, 0xf5, 0)) {
|
|
|
|
ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL);
|
|
|
|
|
|
|
|
if (ec->card_desc)
|
|
|
|
strcpy((char *)ec->card_desc, incd.d.string);
|
|
|
|
}
|
|
|
|
|
|
|
|
buffer += sprintf(buffer, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
|
|
|
|
} else
|
|
|
|
buffer += sprintf(buffer, "Simple card %d\n", ec->cid.id);
|
|
|
|
|
|
|
|
return buffer - start;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int get_ecard_dev_info(char *buf, char **start, off_t pos, int count)
|
|
|
|
{
|
|
|
|
ecard_t *ec = cards;
|
|
|
|
off_t at = 0;
|
|
|
|
int len, cnt;
|
|
|
|
|
|
|
|
cnt = 0;
|
|
|
|
while (ec && count > cnt) {
|
|
|
|
len = ecard_prints(buf, ec);
|
|
|
|
at += len;
|
|
|
|
if (at >= pos) {
|
|
|
|
if (!*start) {
|
|
|
|
*start = buf + (pos - (at - len));
|
|
|
|
cnt = at - pos;
|
|
|
|
} else
|
|
|
|
cnt += len;
|
|
|
|
buf += len;
|
|
|
|
}
|
|
|
|
ec = ec->next;
|
|
|
|
}
|
|
|
|
return (count > cnt) ? cnt : count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct proc_dir_entry *proc_bus_ecard_dir = NULL;
|
|
|
|
|
|
|
|
static void ecard_proc_init(void)
|
|
|
|
{
|
|
|
|
proc_bus_ecard_dir = proc_mkdir("ecard", proc_bus);
|
|
|
|
create_proc_info_entry("devices", 0, proc_bus_ecard_dir,
|
|
|
|
get_ecard_dev_info);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define ec_set_resource(ec,nr,st,sz) \
|
|
|
|
do { \
|
|
|
|
(ec)->resource[nr].name = ec->dev.bus_id; \
|
|
|
|
(ec)->resource[nr].start = st; \
|
|
|
|
(ec)->resource[nr].end = (st) + (sz) - 1; \
|
|
|
|
(ec)->resource[nr].flags = IORESOURCE_MEM; \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
static void __init ecard_free_card(struct expansion_card *ec)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ECARD_NUM_RESOURCES; i++)
|
|
|
|
if (ec->resource[i].flags)
|
|
|
|
release_resource(&ec->resource[i]);
|
|
|
|
|
|
|
|
kfree(ec);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct expansion_card *__init ecard_alloc_card(int type, int slot)
|
|
|
|
{
|
|
|
|
struct expansion_card *ec;
|
|
|
|
unsigned long base;
|
|
|
|
int i;
|
|
|
|
|
2006-03-20 14:46:41 -05:00
|
|
|
ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (!ec) {
|
|
|
|
ec = ERR_PTR(-ENOMEM);
|
|
|
|
goto nomem;
|
|
|
|
}
|
|
|
|
|
|
|
|
ec->slot_no = slot;
|
|
|
|
ec->type = type;
|
|
|
|
ec->irq = NO_IRQ;
|
|
|
|
ec->fiq = NO_IRQ;
|
|
|
|
ec->dma = NO_DMA;
|
|
|
|
ec->ops = &ecard_default_ops;
|
|
|
|
|
|
|
|
snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot);
|
|
|
|
ec->dev.parent = NULL;
|
|
|
|
ec->dev.bus = &ecard_bus_type;
|
|
|
|
ec->dev.dma_mask = &ec->dma_mask;
|
|
|
|
ec->dma_mask = (u64)0xffffffff;
|
|
|
|
|
|
|
|
if (slot < 4) {
|
|
|
|
ec_set_resource(ec, ECARD_RES_MEMC,
|
|
|
|
PODSLOT_MEMC_BASE + (slot << 14),
|
|
|
|
PODSLOT_MEMC_SIZE);
|
|
|
|
base = PODSLOT_IOC0_BASE + (slot << 14);
|
|
|
|
} else
|
|
|
|
base = PODSLOT_IOC4_BASE + ((slot - 4) << 14);
|
|
|
|
|
|
|
|
#ifdef CONFIG_ARCH_RPC
|
|
|
|
if (slot < 8) {
|
|
|
|
ec_set_resource(ec, ECARD_RES_EASI,
|
|
|
|
PODSLOT_EASI_BASE + (slot << 24),
|
|
|
|
PODSLOT_EASI_SIZE);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (slot == 8) {
|
|
|
|
ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE);
|
|
|
|
} else
|
|
|
|
#endif
|
|
|
|
|
|
|
|
for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++)
|
|
|
|
ec_set_resource(ec, i + ECARD_RES_IOCSLOW,
|
|
|
|
base + (i << 19), PODSLOT_IOC_SIZE);
|
|
|
|
|
|
|
|
for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
|
|
|
|
if (ec->resource[i].flags &&
|
|
|
|
request_resource(&iomem_resource, &ec->resource[i])) {
|
|
|
|
printk(KERN_ERR "%s: resource(s) not available\n",
|
|
|
|
ec->dev.bus_id);
|
|
|
|
ec->resource[i].end -= ec->resource[i].start;
|
|
|
|
ec->resource[i].start = 0;
|
|
|
|
ec->resource[i].flags = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
nomem:
|
|
|
|
return ec;
|
|
|
|
}
|
|
|
|
|
2005-05-17 06:40:51 -04:00
|
|
|
static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
return sprintf(buf, "%u\n", ec->irq);
|
|
|
|
}
|
|
|
|
|
2005-05-17 06:40:51 -04:00
|
|
|
static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
return sprintf(buf, "%u\n", ec->dma);
|
|
|
|
}
|
|
|
|
|
2005-05-17 06:40:51 -04:00
|
|
|
static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
char *str = buf;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ECARD_NUM_RESOURCES; i++)
|
2006-07-03 08:29:03 -04:00
|
|
|
str += sprintf(str, "%08x %08x %08lx\n",
|
2005-04-16 18:20:36 -04:00
|
|
|
ec->resource[i].start,
|
|
|
|
ec->resource[i].end,
|
|
|
|
ec->resource[i].flags);
|
|
|
|
|
|
|
|
return str - buf;
|
|
|
|
}
|
|
|
|
|
2005-05-17 06:40:51 -04:00
|
|
|
static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
return sprintf(buf, "%u\n", ec->cid.manufacturer);
|
|
|
|
}
|
|
|
|
|
2005-05-17 06:40:51 -04:00
|
|
|
static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
return sprintf(buf, "%u\n", ec->cid.product);
|
|
|
|
}
|
|
|
|
|
2005-05-17 06:40:51 -04:00
|
|
|
static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC");
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct device_attribute ecard_dev_attrs[] = {
|
|
|
|
__ATTR(device, S_IRUGO, ecard_show_device, NULL),
|
|
|
|
__ATTR(dma, S_IRUGO, ecard_show_dma, NULL),
|
|
|
|
__ATTR(irq, S_IRUGO, ecard_show_irq, NULL),
|
|
|
|
__ATTR(resource, S_IRUGO, ecard_show_resources, NULL),
|
|
|
|
__ATTR(type, S_IRUGO, ecard_show_type, NULL),
|
|
|
|
__ATTR(vendor, S_IRUGO, ecard_show_vendor, NULL),
|
|
|
|
__ATTR_NULL,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
int ecard_request_resources(struct expansion_card *ec)
|
|
|
|
{
|
|
|
|
int i, err = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
|
|
|
|
if (ecard_resource_end(ec, i) &&
|
|
|
|
!request_mem_region(ecard_resource_start(ec, i),
|
|
|
|
ecard_resource_len(ec, i),
|
|
|
|
ec->dev.driver->name)) {
|
|
|
|
err = -EBUSY;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (err) {
|
|
|
|
while (i--)
|
|
|
|
if (ecard_resource_end(ec, i))
|
|
|
|
release_mem_region(ecard_resource_start(ec, i),
|
|
|
|
ecard_resource_len(ec, i));
|
|
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ecard_request_resources);
|
|
|
|
|
|
|
|
void ecard_release_resources(struct expansion_card *ec)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ECARD_NUM_RESOURCES; i++)
|
|
|
|
if (ecard_resource_end(ec, i))
|
|
|
|
release_mem_region(ecard_resource_start(ec, i),
|
|
|
|
ecard_resource_len(ec, i));
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ecard_release_resources);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Probe for an expansion card.
|
|
|
|
*
|
|
|
|
* If bit 1 of the first byte of the card is set, then the
|
|
|
|
* card does not exist.
|
|
|
|
*/
|
|
|
|
static int __init
|
|
|
|
ecard_probe(int slot, card_type_t type)
|
|
|
|
{
|
|
|
|
ecard_t **ecp;
|
|
|
|
ecard_t *ec;
|
|
|
|
struct ex_ecid cid;
|
|
|
|
int i, rc;
|
|
|
|
|
|
|
|
ec = ecard_alloc_card(type, slot);
|
|
|
|
if (IS_ERR(ec)) {
|
|
|
|
rc = PTR_ERR(ec);
|
|
|
|
goto nomem;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = -ENODEV;
|
|
|
|
if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0)
|
|
|
|
goto nodev;
|
|
|
|
|
|
|
|
cid.r_zero = 1;
|
|
|
|
ecard_readbytes(&cid, ec, 0, 16, 0);
|
|
|
|
if (cid.r_zero)
|
|
|
|
goto nodev;
|
|
|
|
|
|
|
|
ec->cid.id = cid.r_id;
|
|
|
|
ec->cid.cd = cid.r_cd;
|
|
|
|
ec->cid.is = cid.r_is;
|
|
|
|
ec->cid.w = cid.r_w;
|
|
|
|
ec->cid.manufacturer = ecard_getu16(cid.r_manu);
|
|
|
|
ec->cid.product = ecard_getu16(cid.r_prod);
|
|
|
|
ec->cid.country = cid.r_country;
|
|
|
|
ec->cid.irqmask = cid.r_irqmask;
|
|
|
|
ec->cid.irqoff = ecard_gets24(cid.r_irqoff);
|
|
|
|
ec->cid.fiqmask = cid.r_fiqmask;
|
|
|
|
ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff);
|
|
|
|
ec->fiqaddr =
|
|
|
|
ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr);
|
|
|
|
|
|
|
|
if (ec->cid.is) {
|
|
|
|
ec->irqmask = ec->cid.irqmask;
|
|
|
|
ec->irqaddr += ec->cid.irqoff;
|
|
|
|
ec->fiqmask = ec->cid.fiqmask;
|
|
|
|
ec->fiqaddr += ec->cid.fiqoff;
|
|
|
|
} else {
|
|
|
|
ec->irqmask = 1;
|
|
|
|
ec->fiqmask = 4;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++)
|
|
|
|
if (blacklist[i].manufacturer == ec->cid.manufacturer &&
|
|
|
|
blacklist[i].product == ec->cid.product) {
|
|
|
|
ec->card_desc = blacklist[i].type;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* hook the interrupt handlers
|
|
|
|
*/
|
|
|
|
if (slot < 8) {
|
|
|
|
ec->irq = 32 + slot;
|
|
|
|
set_irq_chip(ec->irq, &ecard_chip);
|
|
|
|
set_irq_handler(ec->irq, do_level_IRQ);
|
|
|
|
set_irq_flags(ec->irq, IRQF_VALID);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef IO_EC_MEMC8_BASE
|
|
|
|
if (slot == 8)
|
|
|
|
ec->irq = 11;
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_RPC
|
|
|
|
/* On RiscPC, only first two slots have DMA capability */
|
|
|
|
if (slot < 2)
|
|
|
|
ec->dma = 2 + slot;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
for (ecp = &cards; *ecp; ecp = &(*ecp)->next);
|
|
|
|
|
|
|
|
*ecp = ec;
|
|
|
|
slot_to_expcard[slot] = ec;
|
|
|
|
|
|
|
|
device_register(&ec->dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
nodev:
|
|
|
|
ecard_free_card(ec);
|
|
|
|
nomem:
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialise the expansion card system.
|
|
|
|
* Locate all hardware - interrupt management and
|
|
|
|
* actual cards.
|
|
|
|
*/
|
|
|
|
static int __init ecard_init(void)
|
|
|
|
{
|
|
|
|
int slot, irqhw, ret;
|
|
|
|
|
|
|
|
ret = kernel_thread(ecard_task, NULL, CLONE_KERNEL);
|
|
|
|
if (ret < 0) {
|
|
|
|
printk(KERN_ERR "Ecard: unable to create kernel thread: %d\n",
|
|
|
|
ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
printk("Probing expansion cards\n");
|
|
|
|
|
|
|
|
for (slot = 0; slot < 8; slot ++) {
|
|
|
|
if (ecard_probe(slot, ECARD_EASI) == -ENODEV)
|
|
|
|
ecard_probe(slot, ECARD_IOC);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef IO_EC_MEMC8_BASE
|
|
|
|
ecard_probe(8, ECARD_IOC);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
irqhw = ecard_probeirqhw();
|
|
|
|
|
|
|
|
set_irq_chained_handler(IRQ_EXPANSIONCARD,
|
|
|
|
irqhw ? ecard_irqexp_handler : ecard_irq_handler);
|
|
|
|
|
|
|
|
ecard_proc_init();
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
subsys_initcall(ecard_init);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ECARD "bus"
|
|
|
|
*/
|
|
|
|
static const struct ecard_id *
|
|
|
|
ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; ids[i].manufacturer != 65535; i++)
|
|
|
|
if (ec->cid.manufacturer == ids[i].manufacturer &&
|
|
|
|
ec->cid.product == ids[i].product)
|
|
|
|
return ids + i;
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ecard_drv_probe(struct device *dev)
|
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
struct ecard_driver *drv = ECARD_DRV(dev->driver);
|
|
|
|
const struct ecard_id *id;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
id = ecard_match_device(drv->id_table, ec);
|
|
|
|
|
|
|
|
ecard_claim(ec);
|
|
|
|
ret = drv->probe(ec, id);
|
|
|
|
if (ret)
|
|
|
|
ecard_release(ec);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ecard_drv_remove(struct device *dev)
|
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
struct ecard_driver *drv = ECARD_DRV(dev->driver);
|
|
|
|
|
|
|
|
drv->remove(ec);
|
|
|
|
ecard_release(ec);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Before rebooting, we must make sure that the expansion card is in a
|
|
|
|
* sensible state, so it can be re-detected. This means that the first
|
|
|
|
* page of the ROM must be visible. We call the expansion cards reset
|
|
|
|
* handler, if any.
|
|
|
|
*/
|
|
|
|
static void ecard_drv_shutdown(struct device *dev)
|
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
|
|
struct ecard_driver *drv = ECARD_DRV(dev->driver);
|
|
|
|
struct ecard_request req;
|
|
|
|
|
2006-01-05 09:30:57 -05:00
|
|
|
if (dev->driver) {
|
|
|
|
if (drv->shutdown)
|
|
|
|
drv->shutdown(ec);
|
|
|
|
ecard_release(ec);
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If this card has a loader, call the reset handler.
|
|
|
|
*/
|
|
|
|
if (ec->loader) {
|
|
|
|
req.fn = ecard_task_reset;
|
|
|
|
req.ec = ec;
|
|
|
|
ecard_call(&req);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int ecard_register_driver(struct ecard_driver *drv)
|
|
|
|
{
|
|
|
|
drv->drv.bus = &ecard_bus_type;
|
|
|
|
|
|
|
|
return driver_register(&drv->drv);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ecard_remove_driver(struct ecard_driver *drv)
|
|
|
|
{
|
|
|
|
driver_unregister(&drv->drv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ecard_match(struct device *_dev, struct device_driver *_drv)
|
|
|
|
{
|
|
|
|
struct expansion_card *ec = ECARD_DEV(_dev);
|
|
|
|
struct ecard_driver *drv = ECARD_DRV(_drv);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (drv->id_table) {
|
|
|
|
ret = ecard_match_device(drv->id_table, ec) != NULL;
|
|
|
|
} else {
|
|
|
|
ret = ec->cid.id == drv->id;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct bus_type ecard_bus_type = {
|
|
|
|
.name = "ecard",
|
|
|
|
.dev_attrs = ecard_dev_attrs,
|
|
|
|
.match = ecard_match,
|
2006-01-05 09:30:57 -05:00
|
|
|
.probe = ecard_drv_probe,
|
|
|
|
.remove = ecard_drv_remove,
|
|
|
|
.shutdown = ecard_drv_shutdown,
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
|
|
|
|
|
|
|
static int ecard_bus_init(void)
|
|
|
|
{
|
|
|
|
return bus_register(&ecard_bus_type);
|
|
|
|
}
|
|
|
|
|
|
|
|
postcore_initcall(ecard_bus_init);
|
|
|
|
|
|
|
|
EXPORT_SYMBOL(ecard_readchunk);
|
|
|
|
EXPORT_SYMBOL(__ecard_address);
|
|
|
|
EXPORT_SYMBOL(ecard_register_driver);
|
|
|
|
EXPORT_SYMBOL(ecard_remove_driver);
|
|
|
|
EXPORT_SYMBOL(ecard_bus_type);
|