blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
#
|
|
|
|
|
# Automatically generated make config: don't edit
|
2007-05-21 06:09:36 -04:00
|
|
|
# Linux kernel version: 2.6.20.4
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
#
|
|
|
|
|
# CONFIG_MMU is not set
|
|
|
|
|
# CONFIG_FPU is not set
|
|
|
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
|
|
|
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
2007-05-21 06:09:36 -04:00
|
|
|
CONFIG_BLACKFIN=y
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
CONFIG_BFIN=y
|
|
|
|
|
CONFIG_SEMAPHORE_SLEEPERS=y
|
|
|
|
|
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
|
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
|
|
|
CONFIG_GENERIC_HARDIRQS=y
|
|
|
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
2007-05-21 06:09:36 -04:00
|
|
|
# CONFIG_GENERIC_TIME is not set
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
|
|
|
CONFIG_FORCE_MAX_ZONEORDER=14
|
|
|
|
|
CONFIG_IRQCHIP_DEMUX_GPIO=y
|
|
|
|
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Code maturity level options
|
|
|
|
|
#
|
|
|
|
|
CONFIG_EXPERIMENTAL=y
|
|
|
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
|
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# General setup
|
|
|
|
|
#
|
|
|
|
|
CONFIG_LOCALVERSION=""
|
|
|
|
|
CONFIG_LOCALVERSION_AUTO=y
|
|
|
|
|
CONFIG_SYSVIPC=y
|
|
|
|
|
# CONFIG_IPC_NS is not set
|
|
|
|
|
# CONFIG_POSIX_MQUEUE is not set
|
|
|
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
|
|
|
# CONFIG_TASKSTATS is not set
|
|
|
|
|
# CONFIG_UTS_NS is not set
|
|
|
|
|
# CONFIG_AUDIT is not set
|
|
|
|
|
# CONFIG_IKCONFIG is not set
|
|
|
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
|
|
|
# CONFIG_RELAY is not set
|
|
|
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
|
|
|
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
|
|
|
CONFIG_SYSCTL=y
|
|
|
|
|
CONFIG_EMBEDDED=y
|
|
|
|
|
CONFIG_UID16=y
|
|
|
|
|
CONFIG_SYSCTL_SYSCALL=y
|
|
|
|
|
CONFIG_KALLSYMS=y
|
|
|
|
|
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
|
|
|
CONFIG_HOTPLUG=y
|
|
|
|
|
CONFIG_PRINTK=y
|
|
|
|
|
CONFIG_BUG=y
|
|
|
|
|
CONFIG_ELF_CORE=y
|
|
|
|
|
CONFIG_BASE_FULL=y
|
|
|
|
|
CONFIG_FUTEX=y
|
|
|
|
|
CONFIG_EPOLL=y
|
2007-05-21 06:09:36 -04:00
|
|
|
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
# CONFIG_LIMIT_PAGECACHE is not set
|
|
|
|
|
CONFIG_BUDDY=y
|
|
|
|
|
# CONFIG_NP2 is not set
|
|
|
|
|
CONFIG_SLAB=y
|
|
|
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
|
|
|
CONFIG_RT_MUTEXES=y
|
|
|
|
|
CONFIG_TINY_SHMEM=y
|
|
|
|
|
CONFIG_BASE_SMALL=0
|
|
|
|
|
# CONFIG_SLOB is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Loadable module support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MODULES=y
|
|
|
|
|
CONFIG_MODULE_UNLOAD=y
|
|
|
|
|
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
|
|
|
# CONFIG_MODVERSIONS is not set
|
|
|
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
|
|
|
CONFIG_KMOD=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Block layer
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BLOCK=y
|
|
|
|
|
# CONFIG_LBD is not set
|
|
|
|
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
|
|
|
# CONFIG_LSF is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# IO Schedulers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_IOSCHED_NOOP=y
|
|
|
|
|
CONFIG_IOSCHED_AS=y
|
|
|
|
|
# CONFIG_IOSCHED_DEADLINE is not set
|
|
|
|
|
CONFIG_IOSCHED_CFQ=y
|
|
|
|
|
CONFIG_DEFAULT_AS=y
|
|
|
|
|
# CONFIG_DEFAULT_DEADLINE is not set
|
|
|
|
|
# CONFIG_DEFAULT_CFQ is not set
|
|
|
|
|
# CONFIG_DEFAULT_NOOP is not set
|
|
|
|
|
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
2007-05-21 06:09:36 -04:00
|
|
|
# CONFIG_PREEMPT_NONE is not set
|
|
|
|
|
CONFIG_PREEMPT_VOLUNTARY=y
|
|
|
|
|
# CONFIG_PREEMPT is not set
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Blackfin Processor Options
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Processor and Board Settings
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_BF531 is not set
|
|
|
|
|
# CONFIG_BF532 is not set
|
|
|
|
|
# CONFIG_BF533 is not set
|
|
|
|
|
# CONFIG_BF534 is not set
|
|
|
|
|
# CONFIG_BF536 is not set
|
|
|
|
|
CONFIG_BF537=y
|
|
|
|
|
# CONFIG_BF561 is not set
|
|
|
|
|
CONFIG_BF_REV_0_2=y
|
|
|
|
|
# CONFIG_BF_REV_0_3 is not set
|
|
|
|
|
# CONFIG_BF_REV_0_4 is not set
|
|
|
|
|
# CONFIG_BF_REV_0_5 is not set
|
|
|
|
|
CONFIG_BFIN_SINGLE_CORE=y
|
|
|
|
|
# CONFIG_BFIN533_EZKIT is not set
|
|
|
|
|
# CONFIG_BFIN533_STAMP is not set
|
|
|
|
|
CONFIG_BFIN537_STAMP=y
|
|
|
|
|
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
|
|
|
|
|
# CONFIG_BFIN537_BLUETECHNIX_CM is not set
|
|
|
|
|
# CONFIG_BFIN561_BLUETECHNIX_CM is not set
|
|
|
|
|
# CONFIG_BFIN561_EZKIT is not set
|
|
|
|
|
# CONFIG_PNAV10 is not set
|
|
|
|
|
# CONFIG_GENERIC_BOARD is not set
|
|
|
|
|
CONFIG_MEM_MT48LC32M8A2_75=y
|
|
|
|
|
CONFIG_IRQ_PLL_WAKEUP=7
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# BF537 Specific Configuration
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# PORT F/G Selection
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BF537_PORT_F=y
|
|
|
|
|
# CONFIG_BF537_PORT_G is not set
|
|
|
|
|
# CONFIG_BF537_PORT_H is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Interrupt Priority Assignment
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Priority
|
|
|
|
|
#
|
|
|
|
|
CONFIG_IRQ_DMA_ERROR=7
|
|
|
|
|
CONFIG_IRQ_ERROR=7
|
|
|
|
|
CONFIG_IRQ_RTC=8
|
|
|
|
|
CONFIG_IRQ_PPI=8
|
|
|
|
|
CONFIG_IRQ_SPORT0_RX=9
|
|
|
|
|
CONFIG_IRQ_SPORT0_TX=9
|
|
|
|
|
CONFIG_IRQ_SPORT1_RX=9
|
|
|
|
|
CONFIG_IRQ_SPORT1_TX=9
|
|
|
|
|
CONFIG_IRQ_TWI=10
|
|
|
|
|
CONFIG_IRQ_SPI=10
|
|
|
|
|
CONFIG_IRQ_UART0_RX=10
|
|
|
|
|
CONFIG_IRQ_UART0_TX=10
|
|
|
|
|
CONFIG_IRQ_UART1_RX=10
|
|
|
|
|
CONFIG_IRQ_UART1_TX=10
|
|
|
|
|
CONFIG_IRQ_CAN_RX=11
|
|
|
|
|
CONFIG_IRQ_CAN_TX=11
|
|
|
|
|
CONFIG_IRQ_MAC_RX=11
|
|
|
|
|
CONFIG_IRQ_MAC_TX=11
|
|
|
|
|
CONFIG_IRQ_TMR0=12
|
|
|
|
|
CONFIG_IRQ_TMR1=12
|
|
|
|
|
CONFIG_IRQ_TMR2=12
|
|
|
|
|
CONFIG_IRQ_TMR3=12
|
|
|
|
|
CONFIG_IRQ_TMR4=12
|
|
|
|
|
CONFIG_IRQ_TMR5=12
|
|
|
|
|
CONFIG_IRQ_TMR6=12
|
|
|
|
|
CONFIG_IRQ_TMR7=12
|
|
|
|
|
CONFIG_IRQ_PROG_INTA=12
|
|
|
|
|
CONFIG_IRQ_PORTG_INTB=12
|
|
|
|
|
CONFIG_IRQ_MEM_DMA0=13
|
|
|
|
|
CONFIG_IRQ_MEM_DMA1=13
|
|
|
|
|
CONFIG_IRQ_WATCH=13
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Board customizations
|
|
|
|
|
#
|
2007-05-21 06:09:36 -04:00
|
|
|
# CONFIG_CMDLINE_BOOL is not set
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Board Setup
|
|
|
|
|
#
|
|
|
|
|
CONFIG_CLKIN_HZ=25000000
|
|
|
|
|
CONFIG_MEM_SIZE=64
|
|
|
|
|
CONFIG_MEM_ADD_WIDTH=10
|
|
|
|
|
CONFIG_BOOT_LOAD=0x1000
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Console UART Setup
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_BAUD_9600 is not set
|
|
|
|
|
# CONFIG_BAUD_19200 is not set
|
|
|
|
|
# CONFIG_BAUD_38400 is not set
|
|
|
|
|
CONFIG_BAUD_57600=y
|
|
|
|
|
# CONFIG_BAUD_115200 is not set
|
|
|
|
|
CONFIG_BAUD_NO_PARITY=y
|
|
|
|
|
# CONFIG_BAUD_PARITY is not set
|
|
|
|
|
CONFIG_BAUD_1_STOPBIT=y
|
|
|
|
|
# CONFIG_BAUD_2_STOPBIT is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Blackfin Kernel Optimizations
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Timer Tick
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_HZ_100 is not set
|
|
|
|
|
CONFIG_HZ_250=y
|
|
|
|
|
# CONFIG_HZ_300 is not set
|
|
|
|
|
# CONFIG_HZ_1000 is not set
|
|
|
|
|
CONFIG_HZ=250
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Memory Optimizations
|
|
|
|
|
#
|
|
|
|
|
CONFIG_I_ENTRY_L1=y
|
2007-05-21 06:09:36 -04:00
|
|
|
CONFIG_EXCPT_IRQ_SYSC_L1=y
|
|
|
|
|
CONFIG_DO_IRQ_L1=y
|
|
|
|
|
CONFIG_CORE_TIMER_IRQ_L1=y
|
|
|
|
|
CONFIG_IDLE_L1=y
|
|
|
|
|
CONFIG_SCHEDULE_L1=y
|
|
|
|
|
CONFIG_ARITHMETIC_OPS_L1=y
|
|
|
|
|
CONFIG_ACCESS_OK_L1=y
|
|
|
|
|
CONFIG_MEMSET_L1=y
|
|
|
|
|
CONFIG_MEMCPY_L1=y
|
|
|
|
|
CONFIG_SYS_BFIN_SPINLOCK_L1=y
|
|
|
|
|
# CONFIG_IP_CHECKSUM_L1 is not set
|
|
|
|
|
# CONFIG_SYSCALL_TAB_L1 is not set
|
|
|
|
|
# CONFIG_CPLB_SWITCH_TAB_L1 is not set
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
CONFIG_RAMKERNEL=y
|
|
|
|
|
# CONFIG_ROMKERNEL is not set
|
|
|
|
|
CONFIG_SELECT_MEMORY_MODEL=y
|
|
|
|
|
CONFIG_FLATMEM_MANUAL=y
|
|
|
|
|
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
|
|
|
# CONFIG_SPARSEMEM_MANUAL is not set
|
|
|
|
|
CONFIG_FLATMEM=y
|
|
|
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
|
|
|
# CONFIG_SPARSEMEM_STATIC is not set
|
|
|
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
|
|
|
# CONFIG_RESOURCES_64BIT is not set
|
|
|
|
|
CONFIG_LARGE_ALLOCS=y
|
|
|
|
|
CONFIG_BFIN_DMA_5XX=y
|
|
|
|
|
# CONFIG_DMA_UNCACHED_2M is not set
|
|
|
|
|
CONFIG_DMA_UNCACHED_1M=y
|
|
|
|
|
# CONFIG_DMA_UNCACHED_NONE is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Cache Support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BLKFIN_CACHE=y
|
|
|
|
|
CONFIG_BLKFIN_DCACHE=y
|
2007-05-21 06:09:36 -04:00
|
|
|
# CONFIG_BLKFIN_DCACHE_BANKA is not set
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
# CONFIG_BLKFIN_CACHE_LOCK is not set
|
|
|
|
|
# CONFIG_BLKFIN_WB is not set
|
|
|
|
|
CONFIG_BLKFIN_WT=y
|
|
|
|
|
CONFIG_L1_MAX_PIECE=16
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Clock Settings
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Asynchonous Memory Configuration
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# EBIU_AMBCTL Global Control
|
|
|
|
|
#
|
|
|
|
|
CONFIG_C_AMCKEN=y
|
|
|
|
|
CONFIG_C_CDPRIO=y
|
|
|
|
|
# CONFIG_C_AMBEN is not set
|
|
|
|
|
# CONFIG_C_AMBEN_B0 is not set
|
|
|
|
|
# CONFIG_C_AMBEN_B0_B1 is not set
|
|
|
|
|
# CONFIG_C_AMBEN_B0_B1_B2 is not set
|
|
|
|
|
CONFIG_C_AMBEN_ALL=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# EBIU_AMBCTL Control
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BANK_0=0x7BB0
|
|
|
|
|
CONFIG_BANK_1=0x7BB0
|
|
|
|
|
CONFIG_BANK_2=0x7BB0
|
|
|
|
|
CONFIG_BANK_3=0x99B3
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PCI is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# PCCARD (PCMCIA/CardBus) support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PCCARD is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# PCI Hotplug Support
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Executable file formats
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BINFMT_ELF_FDPIC=y
|
|
|
|
|
CONFIG_BINFMT_FLAT=y
|
|
|
|
|
CONFIG_BINFMT_ZFLAT=y
|
|
|
|
|
# CONFIG_BINFMT_SHARED_FLAT is not set
|
|
|
|
|
# CONFIG_BINFMT_MISC is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Power management options
|
|
|
|
|
#
|
|
|
|
|
CONFIG_PM=y
|
|
|
|
|
CONFIG_PM_LEGACY=y
|
|
|
|
|
# CONFIG_PM_DEBUG is not set
|
|
|
|
|
# CONFIG_PM_SYSFS_DEPRECATED is not set
|
|
|
|
|
CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
|
|
|
|
|
# CONFIG_PM_WAKEUP_BY_GPIO is not set
|
|
|
|
|
# CONFIG_PM_WAKEUP_GPIO_API is not set
|
|
|
|
|
CONFIG_PM_WAKEUP_SIC_IWR=0x80000000
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# CPU Frequency scaling
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CPU_FREQ is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Networking
|
|
|
|
|
#
|
|
|
|
|
CONFIG_NET=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Networking options
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_NETDEBUG is not set
|
|
|
|
|
CONFIG_PACKET=y
|
|
|
|
|
# CONFIG_PACKET_MMAP is not set
|
|
|
|
|
CONFIG_UNIX=y
|
|
|
|
|
CONFIG_XFRM=y
|
|
|
|
|
# CONFIG_XFRM_USER is not set
|
|
|
|
|
# CONFIG_XFRM_SUB_POLICY is not set
|
|
|
|
|
# CONFIG_NET_KEY is not set
|
|
|
|
|
CONFIG_INET=y
|
|
|
|
|
# CONFIG_IP_MULTICAST is not set
|
|
|
|
|
# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
|
|
|
CONFIG_IP_FIB_HASH=y
|
|
|
|
|
CONFIG_IP_PNP=y
|
|
|
|
|
# CONFIG_IP_PNP_DHCP is not set
|
|
|
|
|
# CONFIG_IP_PNP_BOOTP is not set
|
|
|
|
|
# CONFIG_IP_PNP_RARP is not set
|
|
|
|
|
# CONFIG_NET_IPIP is not set
|
|
|
|
|
# CONFIG_NET_IPGRE is not set
|
|
|
|
|
# CONFIG_ARPD is not set
|
|
|
|
|
CONFIG_SYN_COOKIES=y
|
|
|
|
|
# CONFIG_INET_AH is not set
|
|
|
|
|
# CONFIG_INET_ESP is not set
|
|
|
|
|
# CONFIG_INET_IPCOMP is not set
|
|
|
|
|
# CONFIG_INET_XFRM_TUNNEL is not set
|
|
|
|
|
# CONFIG_INET_TUNNEL is not set
|
|
|
|
|
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
|
|
|
|
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
|
|
|
|
CONFIG_INET_XFRM_MODE_BEET=y
|
|
|
|
|
CONFIG_INET_DIAG=y
|
|
|
|
|
CONFIG_INET_TCP_DIAG=y
|
|
|
|
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
|
|
|
|
CONFIG_TCP_CONG_CUBIC=y
|
|
|
|
|
CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
|
|
|
# CONFIG_TCP_MD5SIG is not set
|
|
|
|
|
# CONFIG_IPV6 is not set
|
|
|
|
|
# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
|
|
|
# CONFIG_INET6_TUNNEL is not set
|
|
|
|
|
# CONFIG_NETLABEL is not set
|
|
|
|
|
# CONFIG_NETWORK_SECMARK is not set
|
|
|
|
|
# CONFIG_NETFILTER is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# DCCP Configuration (EXPERIMENTAL)
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_IP_DCCP is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SCTP Configuration (EXPERIMENTAL)
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_IP_SCTP is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# TIPC Configuration (EXPERIMENTAL)
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_TIPC is not set
|
|
|
|
|
# CONFIG_ATM is not set
|
|
|
|
|
# CONFIG_BRIDGE is not set
|
|
|
|
|
# CONFIG_VLAN_8021Q is not set
|
|
|
|
|
# CONFIG_DECNET is not set
|
|
|
|
|
# CONFIG_LLC2 is not set
|
|
|
|
|
# CONFIG_IPX is not set
|
|
|
|
|
# CONFIG_ATALK is not set
|
|
|
|
|
# CONFIG_X25 is not set
|
|
|
|
|
# CONFIG_LAPB is not set
|
|
|
|
|
# CONFIG_ECONET is not set
|
|
|
|
|
# CONFIG_WAN_ROUTER is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# QoS and/or fair queueing
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_NET_SCHED is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Network testing
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_NET_PKTGEN is not set
|
|
|
|
|
# CONFIG_HAMRADIO is not set
|
|
|
|
|
CONFIG_IRDA=m
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# IrDA protocols
|
|
|
|
|
#
|
|
|
|
|
CONFIG_IRLAN=m
|
|
|
|
|
CONFIG_IRCOMM=m
|
|
|
|
|
# CONFIG_IRDA_ULTRA is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# IrDA options
|
|
|
|
|
#
|
|
|
|
|
CONFIG_IRDA_CACHE_LAST_LSAP=y
|
|
|
|
|
# CONFIG_IRDA_FAST_RR is not set
|
|
|
|
|
# CONFIG_IRDA_DEBUG is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Infrared-port device drivers
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SIR device drivers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_IRTTY_SIR=m
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Dongle support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_DONGLE is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Old SIR device drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_IRPORT_SIR is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Old Serial dongle support
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# FIR device drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_BT is not set
|
|
|
|
|
# CONFIG_IEEE80211 is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Device Drivers
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Generic Driver Options
|
|
|
|
|
#
|
|
|
|
|
CONFIG_STANDALONE=y
|
|
|
|
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
|
|
|
# CONFIG_FW_LOADER is not set
|
|
|
|
|
# CONFIG_SYS_HYPERVISOR is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Connector - unified userspace <-> kernelspace linker
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CONNECTOR is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Memory Technology Devices (MTD)
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MTD=y
|
|
|
|
|
# CONFIG_MTD_DEBUG is not set
|
|
|
|
|
# CONFIG_MTD_CONCAT is not set
|
|
|
|
|
CONFIG_MTD_PARTITIONS=y
|
|
|
|
|
# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
|
|
|
# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# User Modules And Translation Layers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MTD_CHAR=m
|
|
|
|
|
CONFIG_MTD_BLKDEVS=y
|
|
|
|
|
CONFIG_MTD_BLOCK=y
|
|
|
|
|
# CONFIG_FTL is not set
|
|
|
|
|
# CONFIG_NFTL is not set
|
|
|
|
|
# CONFIG_INFTL is not set
|
|
|
|
|
# CONFIG_RFD_FTL is not set
|
|
|
|
|
# CONFIG_SSFDC is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# RAM/ROM/Flash chip drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_CFI is not set
|
|
|
|
|
CONFIG_MTD_JEDECPROBE=m
|
|
|
|
|
CONFIG_MTD_GEN_PROBE=m
|
|
|
|
|
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
|
|
|
|
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
|
|
|
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
|
|
|
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
|
|
|
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
|
|
|
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
|
|
|
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
|
|
|
CONFIG_MTD_CFI_I1=y
|
|
|
|
|
CONFIG_MTD_CFI_I2=y
|
|
|
|
|
# CONFIG_MTD_CFI_I4 is not set
|
|
|
|
|
# CONFIG_MTD_CFI_I8 is not set
|
|
|
|
|
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
|
|
|
# CONFIG_MTD_CFI_AMDSTD is not set
|
|
|
|
|
# CONFIG_MTD_CFI_STAA is not set
|
|
|
|
|
CONFIG_MTD_MW320D=m
|
|
|
|
|
CONFIG_MTD_RAM=y
|
|
|
|
|
CONFIG_MTD_ROM=m
|
|
|
|
|
# CONFIG_MTD_ABSENT is not set
|
|
|
|
|
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Mapping drivers for chip access
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
|
|
|
|
# CONFIG_MTD_PHYSMAP is not set
|
|
|
|
|
CONFIG_MTD_BF5xx=m
|
|
|
|
|
CONFIG_BFIN_FLASH_SIZE=0x400000
|
|
|
|
|
CONFIG_EBIU_FLASH_BASE=0x20000000
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# FLASH_EBIU_AMBCTL Control
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BFIN_FLASH_BANK_0=0x7BB0
|
|
|
|
|
CONFIG_BFIN_FLASH_BANK_1=0x7BB0
|
|
|
|
|
CONFIG_BFIN_FLASH_BANK_2=0x7BB0
|
|
|
|
|
CONFIG_BFIN_FLASH_BANK_3=0x7BB0
|
|
|
|
|
CONFIG_MTD_UCLINUX=y
|
|
|
|
|
# CONFIG_MTD_PLATRAM is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Self-contained MTD device drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_DATAFLASH is not set
|
|
|
|
|
# CONFIG_MTD_M25P80 is not set
|
|
|
|
|
# CONFIG_MTD_SLRAM is not set
|
|
|
|
|
# CONFIG_MTD_PHRAM is not set
|
|
|
|
|
# CONFIG_MTD_MTDRAM is not set
|
|
|
|
|
# CONFIG_MTD_BLOCK2MTD is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Disk-On-Chip Device Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_DOC2000 is not set
|
|
|
|
|
# CONFIG_MTD_DOC2001 is not set
|
|
|
|
|
# CONFIG_MTD_DOC2001PLUS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# NAND Flash Device Drivers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MTD_NAND=m
|
|
|
|
|
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
|
|
|
# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
|
|
|
CONFIG_MTD_NAND_BFIN=m
|
|
|
|
|
CONFIG_BFIN_NAND_BASE=0x20212000
|
|
|
|
|
CONFIG_BFIN_NAND_CLE=2
|
|
|
|
|
CONFIG_BFIN_NAND_ALE=1
|
|
|
|
|
CONFIG_BFIN_NAND_READY=3
|
|
|
|
|
CONFIG_MTD_NAND_IDS=m
|
|
|
|
|
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
|
|
|
# CONFIG_MTD_NAND_NANDSIM is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# OneNAND Flash Device Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_ONENAND is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Parallel port support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PARPORT is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Plug and Play support
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Block devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
|
|
|
# CONFIG_BLK_DEV_LOOP is not set
|
|
|
|
|
# CONFIG_BLK_DEV_NBD is not set
|
|
|
|
|
CONFIG_BLK_DEV_RAM=y
|
|
|
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
|
|
|
CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
|
|
|
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
|
|
|
# CONFIG_BLK_DEV_INITRD is not set
|
|
|
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
|
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Misc devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_TIFM_CORE is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# ATA/ATAPI/MFM/RLL support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_IDE is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SCSI device support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_RAID_ATTRS is not set
|
|
|
|
|
# CONFIG_SCSI is not set
|
|
|
|
|
# CONFIG_SCSI_NETLINK is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Serial ATA (prod) and Parallel ATA (experimental) drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_ATA is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Multi-device support (RAID and LVM)
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MD is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Fusion MPT device support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_FUSION is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# IEEE 1394 (FireWire) support
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# I2O device support
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Network device support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_NETDEVICES=y
|
|
|
|
|
# CONFIG_DUMMY is not set
|
|
|
|
|
# CONFIG_BONDING is not set
|
|
|
|
|
# CONFIG_EQUALIZER is not set
|
|
|
|
|
# CONFIG_TUN is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# PHY device support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PHYLIB is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Ethernet (10 or 100Mbit)
|
|
|
|
|
#
|
|
|
|
|
CONFIG_NET_ETHERNET=y
|
|
|
|
|
CONFIG_MII=y
|
|
|
|
|
# CONFIG_SMC91X is not set
|
|
|
|
|
CONFIG_BFIN_MAC=y
|
|
|
|
|
CONFIG_BFIN_MAC_USE_L1=y
|
|
|
|
|
CONFIG_BFIN_TX_DESC_NUM=10
|
|
|
|
|
CONFIG_BFIN_RX_DESC_NUM=20
|
|
|
|
|
# CONFIG_BFIN_MAC_RMII is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Ethernet (1000 Mbit)
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Ethernet (10000 Mbit)
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Token Ring devices
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Wireless LAN (non-hamradio)
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_NET_RADIO is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Wan interfaces
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_WAN is not set
|
|
|
|
|
# CONFIG_PPP is not set
|
|
|
|
|
# CONFIG_SLIP is not set
|
|
|
|
|
# CONFIG_SHAPER is not set
|
|
|
|
|
# CONFIG_NETCONSOLE is not set
|
|
|
|
|
# CONFIG_NETPOLL is not set
|
|
|
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# ISDN subsystem
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_ISDN is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Telephony Support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PHONE is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Input device support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_INPUT=y
|
|
|
|
|
# CONFIG_INPUT_FF_MEMLESS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Userland interfaces
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_INPUT_MOUSEDEV is not set
|
|
|
|
|
# CONFIG_INPUT_JOYDEV is not set
|
|
|
|
|
# CONFIG_INPUT_TSDEV is not set
|
|
|
|
|
CONFIG_INPUT_EVDEV=m
|
|
|
|
|
# CONFIG_INPUT_EVBUG is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Input Device Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_INPUT_KEYBOARD is not set
|
|
|
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
|
|
|
# CONFIG_INPUT_JOYSTICK is not set
|
|
|
|
|
# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
|
|
|
CONFIG_INPUT_MISC=y
|
|
|
|
|
# CONFIG_INPUT_UINPUT is not set
|
|
|
|
|
# CONFIG_BF53X_PFBUTTONS is not set
|
|
|
|
|
CONFIG_TWI_KEYPAD=m
|
|
|
|
|
CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Hardware I/O ports
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SERIO is not set
|
|
|
|
|
# CONFIG_GAMEPORT is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Character devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_AD9960 is not set
|
|
|
|
|
# CONFIG_SPI_ADC_BF533 is not set
|
|
|
|
|
# CONFIG_BF533_PFLAGS is not set
|
|
|
|
|
# CONFIG_BF5xx_PPIFCD is not set
|
|
|
|
|
# CONFIG_BF5xx_TIMERS is not set
|
|
|
|
|
# CONFIG_BF5xx_PPI is not set
|
|
|
|
|
CONFIG_BFIN_SPORT=y
|
|
|
|
|
# CONFIG_BFIN_TIMER_LATENCY is not set
|
|
|
|
|
CONFIG_TWI_LCD=m
|
|
|
|
|
CONFIG_TWI_LCD_SLAVE_ADDR=34
|
|
|
|
|
# CONFIG_AD5304 is not set
|
|
|
|
|
# CONFIG_VT is not set
|
|
|
|
|
# CONFIG_SERIAL_NONSTANDARD is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Serial drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SERIAL_8250 is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Non-8250 serial port support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_SERIAL_BFIN=y
|
|
|
|
|
CONFIG_SERIAL_BFIN_CONSOLE=y
|
|
|
|
|
CONFIG_SERIAL_BFIN_DMA=y
|
|
|
|
|
# CONFIG_SERIAL_BFIN_PIO is not set
|
|
|
|
|
CONFIG_SERIAL_BFIN_UART0=y
|
|
|
|
|
# CONFIG_BFIN_UART0_CTSRTS is not set
|
|
|
|
|
# CONFIG_SERIAL_BFIN_UART1 is not set
|
|
|
|
|
CONFIG_SERIAL_CORE=y
|
|
|
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
|
|
|
|
# CONFIG_SERIAL_BFIN_SPORT is not set
|
|
|
|
|
CONFIG_UNIX98_PTYS=y
|
|
|
|
|
# CONFIG_LEGACY_PTYS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# CAN, the car bus and industrial fieldbus
|
|
|
|
|
#
|
|
|
|
|
CONFIG_CAN4LINUX=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# linux embedded drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CAN_MCF5282 is not set
|
|
|
|
|
# CONFIG_CAN_UNCTWINCAN is not set
|
|
|
|
|
CONFIG_CAN_BLACKFIN=m
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# IPMI
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Watchdog Cards
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_WATCHDOG is not set
|
|
|
|
|
CONFIG_HW_RANDOM=y
|
|
|
|
|
# CONFIG_GEN_RTC is not set
|
|
|
|
|
CONFIG_BLACKFIN_DPMC=y
|
|
|
|
|
# CONFIG_DTLK is not set
|
|
|
|
|
# CONFIG_R3964 is not set
|
|
|
|
|
# CONFIG_RAW_DRIVER is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# TPM devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_TCG_TPM is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# I2C support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_I2C=m
|
|
|
|
|
CONFIG_I2C_CHARDEV=m
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# I2C Algorithms
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_I2C_ALGOBIT is not set
|
|
|
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
|
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# I2C Hardware Bus support
|
|
|
|
|
#
|
2007-05-21 06:09:36 -04:00
|
|
|
# CONFIG_I2C_BLACKFIN_GPIO is not set
|
|
|
|
|
# CONFIG_I2C_BLACKFIN_TWI is not set
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
# CONFIG_I2C_OCORES is not set
|
|
|
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
|
|
|
# CONFIG_I2C_STUB is not set
|
|
|
|
|
# CONFIG_I2C_PCA_ISA is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Miscellaneous I2C Chip support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SENSORS_DS1337 is not set
|
|
|
|
|
# CONFIG_SENSORS_DS1374 is not set
|
|
|
|
|
CONFIG_SENSORS_AD5252=m
|
|
|
|
|
# CONFIG_SENSORS_EEPROM is not set
|
|
|
|
|
# CONFIG_SENSORS_PCF8574 is not set
|
|
|
|
|
# CONFIG_SENSORS_PCF8575 is not set
|
2007-05-21 06:09:36 -04:00
|
|
|
# CONFIG_SENSORS_PCA9543 is not set
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
# CONFIG_SENSORS_PCA9539 is not set
|
|
|
|
|
# CONFIG_SENSORS_PCF8591 is not set
|
|
|
|
|
# CONFIG_SENSORS_MAX6875 is not set
|
|
|
|
|
# CONFIG_I2C_DEBUG_CORE is not set
|
|
|
|
|
# CONFIG_I2C_DEBUG_ALGO is not set
|
|
|
|
|
# CONFIG_I2C_DEBUG_BUS is not set
|
|
|
|
|
# CONFIG_I2C_DEBUG_CHIP is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SPI support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_SPI=y
|
|
|
|
|
CONFIG_SPI_MASTER=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SPI Master Controller Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SPI_BITBANG is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SPI Protocol Masters
|
|
|
|
|
#
|
2007-05-21 06:09:36 -04:00
|
|
|
CONFIG_SPI_BFIN=y
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Dallas's 1-wire bus
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_W1 is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Hardware Monitoring support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_HWMON=y
|
|
|
|
|
# CONFIG_HWMON_VID is not set
|
|
|
|
|
# CONFIG_SENSORS_ABITUGURU is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM1021 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM1025 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM1026 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM1031 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM9240 is not set
|
|
|
|
|
# CONFIG_SENSORS_ASB100 is not set
|
|
|
|
|
# CONFIG_SENSORS_ATXP1 is not set
|
|
|
|
|
# CONFIG_SENSORS_DS1621 is not set
|
|
|
|
|
# CONFIG_SENSORS_F71805F is not set
|
|
|
|
|
# CONFIG_SENSORS_FSCHER is not set
|
|
|
|
|
# CONFIG_SENSORS_FSCPOS is not set
|
|
|
|
|
# CONFIG_SENSORS_GL518SM is not set
|
|
|
|
|
# CONFIG_SENSORS_GL520SM is not set
|
|
|
|
|
# CONFIG_SENSORS_IT87 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM63 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM70 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM75 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM77 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM78 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM80 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM83 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM85 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM87 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM90 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM92 is not set
|
|
|
|
|
# CONFIG_SENSORS_MAX1619 is not set
|
|
|
|
|
# CONFIG_SENSORS_PC87360 is not set
|
|
|
|
|
# CONFIG_SENSORS_PC87427 is not set
|
|
|
|
|
# CONFIG_SENSORS_SMSC47M1 is not set
|
|
|
|
|
# CONFIG_SENSORS_SMSC47M192 is not set
|
|
|
|
|
# CONFIG_SENSORS_SMSC47B397 is not set
|
|
|
|
|
# CONFIG_SENSORS_VT1211 is not set
|
|
|
|
|
# CONFIG_SENSORS_W83781D is not set
|
|
|
|
|
# CONFIG_SENSORS_W83791D is not set
|
|
|
|
|
# CONFIG_SENSORS_W83792D is not set
|
|
|
|
|
# CONFIG_SENSORS_W83793 is not set
|
|
|
|
|
# CONFIG_SENSORS_W83L785TS is not set
|
|
|
|
|
# CONFIG_SENSORS_W83627HF is not set
|
|
|
|
|
# CONFIG_SENSORS_W83627EHF is not set
|
|
|
|
|
# CONFIG_HWMON_DEBUG_CHIP is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Multimedia devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_VIDEO_DEV is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Digital Video Broadcasting Devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_DVB is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Graphics support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_FIRMWARE_EDID=y
|
|
|
|
|
CONFIG_FB=m
|
|
|
|
|
CONFIG_FB_CFB_FILLRECT=m
|
|
|
|
|
CONFIG_FB_CFB_COPYAREA=m
|
|
|
|
|
CONFIG_FB_CFB_IMAGEBLIT=m
|
|
|
|
|
# CONFIG_FB_MACMODES is not set
|
|
|
|
|
# CONFIG_FB_BACKLIGHT is not set
|
|
|
|
|
# CONFIG_FB_MODE_HELPERS is not set
|
|
|
|
|
# CONFIG_FB_TILEBLITTING is not set
|
|
|
|
|
CONFIG_FB_BFIN_7171=m
|
|
|
|
|
CONFIG_FB_BFIN_7393=m
|
|
|
|
|
CONFIG_NTSC=y
|
|
|
|
|
# CONFIG_PAL is not set
|
|
|
|
|
# CONFIG_NTSC_640x480 is not set
|
|
|
|
|
# CONFIG_PAL_640x480 is not set
|
|
|
|
|
# CONFIG_NTSC_YCBCR is not set
|
|
|
|
|
# CONFIG_PAL_YCBCR is not set
|
|
|
|
|
CONFIG_ADV7393_1XMEM=y
|
|
|
|
|
# CONFIG_ADV7393_2XMEM is not set
|
|
|
|
|
# CONFIG_FB_S1D13XXX is not set
|
|
|
|
|
# CONFIG_FB_VIRTUAL is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Logo configuration
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_LOGO is not set
|
|
|
|
|
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
|
|
|
|
CONFIG_BACKLIGHT_CLASS_DEVICE=m
|
|
|
|
|
CONFIG_BACKLIGHT_DEVICE=y
|
|
|
|
|
CONFIG_LCD_CLASS_DEVICE=m
|
|
|
|
|
CONFIG_LCD_DEVICE=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Sound
|
|
|
|
|
#
|
|
|
|
|
CONFIG_SOUND=m
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Advanced Linux Sound Architecture
|
|
|
|
|
#
|
|
|
|
|
CONFIG_SND=m
|
|
|
|
|
CONFIG_SND_TIMER=m
|
|
|
|
|
CONFIG_SND_PCM=m
|
|
|
|
|
# CONFIG_SND_SEQUENCER is not set
|
|
|
|
|
CONFIG_SND_OSSEMUL=y
|
|
|
|
|
CONFIG_SND_MIXER_OSS=m
|
|
|
|
|
CONFIG_SND_PCM_OSS=m
|
|
|
|
|
CONFIG_SND_PCM_OSS_PLUGINS=y
|
|
|
|
|
# CONFIG_SND_DYNAMIC_MINORS is not set
|
|
|
|
|
CONFIG_SND_SUPPORT_OLD_API=y
|
|
|
|
|
CONFIG_SND_VERBOSE_PROCFS=y
|
|
|
|
|
# CONFIG_SND_VERBOSE_PRINTK is not set
|
|
|
|
|
# CONFIG_SND_DEBUG is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Generic devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SND_DUMMY is not set
|
|
|
|
|
# CONFIG_SND_MTPAV is not set
|
|
|
|
|
# CONFIG_SND_SERIAL_U16550 is not set
|
|
|
|
|
# CONFIG_SND_MPU401 is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Open Sound System
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SOUND_PRIME is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# HID Devices
|
|
|
|
|
#
|
|
|
|
|
CONFIG_HID=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_USB_ARCH_HAS_HCD=y
|
|
|
|
|
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
|
|
|
|
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
|
|
|
# CONFIG_USB is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB Gadget Support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_USB_GADGET is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# MMC/SD Card support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SPI_MMC is not set
|
|
|
|
|
# CONFIG_MMC is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# LED devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_NEW_LEDS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# LED drivers
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# LED Triggers
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# InfiniBand support
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Real Time Clock
|
|
|
|
|
#
|
|
|
|
|
CONFIG_RTC_LIB=y
|
|
|
|
|
CONFIG_RTC_CLASS=y
|
|
|
|
|
CONFIG_RTC_HCTOSYS=y
|
|
|
|
|
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
|
|
|
# CONFIG_RTC_DEBUG is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# RTC interfaces
|
|
|
|
|
#
|
|
|
|
|
CONFIG_RTC_INTF_SYSFS=y
|
|
|
|
|
CONFIG_RTC_INTF_PROC=y
|
|
|
|
|
CONFIG_RTC_INTF_DEV=y
|
|
|
|
|
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# RTC drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_RTC_DRV_X1205 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1307 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1553 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_ISL1208 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1672 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1742 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_PCF8563 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_PCF8583 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_RS5C348 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_RS5C372 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_M48T86 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_TEST is not set
|
|
|
|
|
# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
|
CONFIG_RTC_DRV_BFIN=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# DMA Engine support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_DMA_ENGINE is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# DMA Clients
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# DMA Devices
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Virtualization
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# PBX support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PBX is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# File systems
|
|
|
|
|
#
|
|
|
|
|
CONFIG_EXT2_FS=y
|
|
|
|
|
CONFIG_EXT2_FS_XATTR=y
|
|
|
|
|
# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
|
|
|
# CONFIG_EXT2_FS_SECURITY is not set
|
|
|
|
|
# CONFIG_EXT3_FS is not set
|
|
|
|
|
# CONFIG_EXT4DEV_FS is not set
|
|
|
|
|
CONFIG_FS_MBCACHE=y
|
|
|
|
|
# CONFIG_REISERFS_FS is not set
|
|
|
|
|
# CONFIG_JFS_FS is not set
|
|
|
|
|
# CONFIG_FS_POSIX_ACL is not set
|
|
|
|
|
# CONFIG_XFS_FS is not set
|
|
|
|
|
# CONFIG_GFS2_FS is not set
|
|
|
|
|
# CONFIG_OCFS2_FS is not set
|
|
|
|
|
# CONFIG_MINIX_FS is not set
|
|
|
|
|
# CONFIG_ROMFS_FS is not set
|
|
|
|
|
CONFIG_INOTIFY=y
|
|
|
|
|
CONFIG_INOTIFY_USER=y
|
|
|
|
|
# CONFIG_QUOTA is not set
|
|
|
|
|
CONFIG_DNOTIFY=y
|
|
|
|
|
# CONFIG_AUTOFS_FS is not set
|
|
|
|
|
# CONFIG_AUTOFS4_FS is not set
|
|
|
|
|
# CONFIG_FUSE_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# CD-ROM/DVD Filesystems
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_ISO9660_FS is not set
|
|
|
|
|
# CONFIG_UDF_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# DOS/FAT/NT Filesystems
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MSDOS_FS is not set
|
|
|
|
|
# CONFIG_VFAT_FS is not set
|
|
|
|
|
# CONFIG_NTFS_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Pseudo filesystems
|
|
|
|
|
#
|
|
|
|
|
CONFIG_PROC_FS=y
|
|
|
|
|
CONFIG_PROC_SYSCTL=y
|
|
|
|
|
CONFIG_SYSFS=y
|
|
|
|
|
# CONFIG_TMPFS is not set
|
|
|
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
|
|
|
CONFIG_RAMFS=y
|
|
|
|
|
# CONFIG_CONFIGFS_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Miscellaneous filesystems
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_ADFS_FS is not set
|
|
|
|
|
# CONFIG_AFFS_FS is not set
|
|
|
|
|
# CONFIG_HFS_FS is not set
|
|
|
|
|
# CONFIG_HFSPLUS_FS is not set
|
|
|
|
|
# CONFIG_BEFS_FS is not set
|
|
|
|
|
# CONFIG_BFS_FS is not set
|
|
|
|
|
# CONFIG_EFS_FS is not set
|
|
|
|
|
CONFIG_YAFFS_FS=m
|
|
|
|
|
CONFIG_YAFFS_YAFFS1=y
|
|
|
|
|
# CONFIG_YAFFS_DOES_ECC is not set
|
|
|
|
|
CONFIG_YAFFS_YAFFS2=y
|
|
|
|
|
CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
|
|
|
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
|
|
|
CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
|
|
|
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
|
|
|
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
|
|
|
|
|
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
|
|
|
CONFIG_JFFS2_FS=m
|
|
|
|
|
CONFIG_JFFS2_FS_DEBUG=0
|
|
|
|
|
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
|
|
|
# CONFIG_JFFS2_SUMMARY is not set
|
|
|
|
|
# CONFIG_JFFS2_FS_XATTR is not set
|
|
|
|
|
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
|
|
|
CONFIG_JFFS2_ZLIB=y
|
|
|
|
|
CONFIG_JFFS2_RTIME=y
|
|
|
|
|
# CONFIG_JFFS2_RUBIN is not set
|
|
|
|
|
# CONFIG_CRAMFS is not set
|
|
|
|
|
# CONFIG_VXFS_FS is not set
|
|
|
|
|
# CONFIG_HPFS_FS is not set
|
|
|
|
|
# CONFIG_QNX4FS_FS is not set
|
|
|
|
|
# CONFIG_SYSV_FS is not set
|
|
|
|
|
# CONFIG_UFS_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Network File Systems
|
|
|
|
|
#
|
|
|
|
|
CONFIG_NFS_FS=m
|
|
|
|
|
CONFIG_NFS_V3=y
|
|
|
|
|
# CONFIG_NFS_V3_ACL is not set
|
|
|
|
|
# CONFIG_NFS_V4 is not set
|
|
|
|
|
# CONFIG_NFS_DIRECTIO is not set
|
|
|
|
|
# CONFIG_NFSD is not set
|
|
|
|
|
CONFIG_LOCKD=m
|
|
|
|
|
CONFIG_LOCKD_V4=y
|
|
|
|
|
CONFIG_NFS_COMMON=y
|
|
|
|
|
CONFIG_SUNRPC=m
|
|
|
|
|
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
|
|
|
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
|
|
|
CONFIG_SMB_FS=m
|
|
|
|
|
# CONFIG_SMB_NLS_DEFAULT is not set
|
|
|
|
|
# CONFIG_CIFS is not set
|
|
|
|
|
# CONFIG_NCP_FS is not set
|
|
|
|
|
# CONFIG_CODA_FS is not set
|
|
|
|
|
# CONFIG_AFS_FS is not set
|
|
|
|
|
# CONFIG_9P_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Partition Types
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PARTITION_ADVANCED is not set
|
|
|
|
|
CONFIG_MSDOS_PARTITION=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Native Language Support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_NLS=m
|
|
|
|
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_437 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_737 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_775 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_850 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_852 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_855 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_857 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_860 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_861 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_862 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_863 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_864 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_865 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_866 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_869 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_936 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_950 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_932 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_949 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_874 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_8 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
|
|
|
# CONFIG_NLS_ASCII is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_1 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_2 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_3 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_4 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_5 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_6 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_7 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_9 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_13 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_14 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_15 is not set
|
|
|
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
|
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
|
|
|
# CONFIG_NLS_UTF8 is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Distributed Lock Manager
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_DLM is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Profiling support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PROFILING is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Kernel hacking
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PRINTK_TIME is not set
|
|
|
|
|
CONFIG_ENABLE_MUST_CHECK=y
|
|
|
|
|
# CONFIG_MAGIC_SYSRQ is not set
|
|
|
|
|
# CONFIG_UNUSED_SYMBOLS is not set
|
|
|
|
|
# CONFIG_DEBUG_FS is not set
|
|
|
|
|
# CONFIG_HEADERS_CHECK is not set
|
|
|
|
|
# CONFIG_DEBUG_KERNEL is not set
|
|
|
|
|
CONFIG_LOG_BUF_SHIFT=14
|
|
|
|
|
# CONFIG_DEBUG_BUGVERBOSE is not set
|
2007-05-21 06:09:36 -04:00
|
|
|
# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
CONFIG_DEBUG_HUNT_FOR_ZERO=y
|
|
|
|
|
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
|
|
|
|
|
CONFIG_CPLB_INFO=y
|
2007-05-21 06:09:36 -04:00
|
|
|
CONFIG_ACCESS_CHECK=y
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Security options
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_KEYS is not set
|
|
|
|
|
CONFIG_SECURITY=y
|
|
|
|
|
# CONFIG_SECURITY_NETWORK is not set
|
|
|
|
|
CONFIG_SECURITY_CAPABILITIES=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Cryptographic options
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CRYPTO is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Library routines
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BITREVERSE=y
|
|
|
|
|
CONFIG_CRC_CCITT=m
|
|
|
|
|
# CONFIG_CRC16 is not set
|
|
|
|
|
CONFIG_CRC32=y
|
|
|
|
|
# CONFIG_LIBCRC32C is not set
|
|
|
|
|
CONFIG_ZLIB_INFLATE=y
|
|
|
|
|
CONFIG_ZLIB_DEFLATE=m
|
|
|
|
|
CONFIG_PLIST=y
|
|
|
|
|
CONFIG_IOMAP_COPY=y
|