powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
#
|
|
|
|
|
# Automatically generated make config: don't edit
|
2009-07-30 00:34:01 -04:00
|
|
|
# Linux kernel version: 2.6.31-rc4
|
|
|
|
|
# Wed Jul 29 23:32:19 2009
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
#
|
|
|
|
|
# CONFIG_PPC64 is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Processor support
|
|
|
|
|
#
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_PPC_BOOK3S_32 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_PPC_85xx=y
|
|
|
|
|
# CONFIG_PPC_8xx is not set
|
|
|
|
|
# CONFIG_40x is not set
|
|
|
|
|
# CONFIG_44x is not set
|
|
|
|
|
# CONFIG_E200 is not set
|
|
|
|
|
CONFIG_E500=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_PPC_E500MC is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_BOOKE=y
|
|
|
|
|
CONFIG_FSL_BOOKE=y
|
|
|
|
|
CONFIG_FSL_EMB_PERFMON=y
|
|
|
|
|
# CONFIG_PHYS_64BIT is not set
|
|
|
|
|
CONFIG_SPE=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_PPC_MMU_NOHASH=y
|
|
|
|
|
CONFIG_PPC_BOOK3E_MMU=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_PPC_MM_SLICES is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SMP is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_PPC32=y
|
|
|
|
|
CONFIG_WORD_SIZE=32
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_MMU=y
|
|
|
|
|
CONFIG_GENERIC_CMOS_UPDATE=y
|
|
|
|
|
CONFIG_GENERIC_TIME=y
|
|
|
|
|
CONFIG_GENERIC_TIME_VSYSCALL=y
|
|
|
|
|
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
|
|
|
CONFIG_GENERIC_HARDIRQS=y
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
|
|
|
|
|
CONFIG_IRQ_PER_CPU=y
|
|
|
|
|
CONFIG_STACKTRACE_SUPPORT=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_LOCKDEP_SUPPORT=y
|
|
|
|
|
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
|
|
|
|
CONFIG_ARCH_HAS_ILOG2_U32=y
|
|
|
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
|
|
|
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
|
|
|
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
|
|
|
|
|
CONFIG_PPC=y
|
|
|
|
|
CONFIG_EARLY_PRINTK=y
|
|
|
|
|
CONFIG_GENERIC_NVRAM=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
|
|
|
|
CONFIG_PPC_OF=y
|
|
|
|
|
CONFIG_OF=y
|
|
|
|
|
CONFIG_PPC_UDBG_16550=y
|
|
|
|
|
# CONFIG_GENERIC_TBSYNC is not set
|
|
|
|
|
CONFIG_AUDIT_ARCH=y
|
|
|
|
|
CONFIG_GENERIC_BUG=y
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_DTC=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_DEFAULT_UIMAGE=y
|
|
|
|
|
# CONFIG_PPC_DCR_NATIVE is not set
|
|
|
|
|
# CONFIG_PPC_DCR_MMIO is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_CONSTRUCTORS=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# General setup
|
|
|
|
|
#
|
|
|
|
|
CONFIG_EXPERIMENTAL=y
|
|
|
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
|
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
|
|
|
CONFIG_LOCALVERSION=""
|
|
|
|
|
CONFIG_LOCALVERSION_AUTO=y
|
|
|
|
|
CONFIG_SWAP=y
|
|
|
|
|
CONFIG_SYSVIPC=y
|
|
|
|
|
CONFIG_SYSVIPC_SYSCTL=y
|
|
|
|
|
# CONFIG_POSIX_MQUEUE is not set
|
|
|
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
|
|
|
# CONFIG_TASKSTATS is not set
|
|
|
|
|
# CONFIG_AUDIT is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# RCU Subsystem
|
|
|
|
|
#
|
|
|
|
|
CONFIG_CLASSIC_RCU=y
|
|
|
|
|
# CONFIG_TREE_RCU is not set
|
|
|
|
|
# CONFIG_PREEMPT_RCU is not set
|
|
|
|
|
# CONFIG_TREE_RCU_TRACE is not set
|
|
|
|
|
# CONFIG_PREEMPT_RCU_TRACE is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_IKCONFIG is not set
|
|
|
|
|
CONFIG_LOG_BUF_SHIFT=16
|
|
|
|
|
CONFIG_GROUP_SCHED=y
|
|
|
|
|
CONFIG_FAIR_GROUP_SCHED=y
|
|
|
|
|
# CONFIG_RT_GROUP_SCHED is not set
|
|
|
|
|
CONFIG_USER_SCHED=y
|
|
|
|
|
# CONFIG_CGROUP_SCHED is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_CGROUPS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
|
|
|
CONFIG_SYSFS_DEPRECATED_V2=y
|
|
|
|
|
# CONFIG_RELAY is not set
|
|
|
|
|
# CONFIG_NAMESPACES is not set
|
|
|
|
|
CONFIG_BLK_DEV_INITRD=y
|
|
|
|
|
CONFIG_INITRAMFS_SOURCE=""
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_RD_GZIP=y
|
|
|
|
|
# CONFIG_RD_BZIP2 is not set
|
|
|
|
|
# CONFIG_RD_LZMA is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
|
|
|
CONFIG_SYSCTL=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_ANON_INODES=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_EMBEDDED=y
|
|
|
|
|
CONFIG_SYSCTL_SYSCALL=y
|
|
|
|
|
# CONFIG_KALLSYMS is not set
|
|
|
|
|
# CONFIG_HOTPLUG is not set
|
|
|
|
|
CONFIG_PRINTK=y
|
|
|
|
|
CONFIG_BUG=y
|
|
|
|
|
CONFIG_ELF_CORE=y
|
|
|
|
|
CONFIG_BASE_FULL=y
|
|
|
|
|
CONFIG_FUTEX=y
|
|
|
|
|
# CONFIG_EPOLL is not set
|
|
|
|
|
CONFIG_SIGNALFD=y
|
|
|
|
|
CONFIG_TIMERFD=y
|
|
|
|
|
CONFIG_EVENTFD=y
|
|
|
|
|
CONFIG_SHMEM=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_AIO=y
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_HAVE_PERF_COUNTERS=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Performance Counters
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PERF_COUNTERS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_PCI_QUIRKS=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_SLUB_DEBUG=y
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_STRIP_ASM_SYMS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_COMPAT_BRK=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SLAB is not set
|
|
|
|
|
CONFIG_SLUB=y
|
|
|
|
|
# CONFIG_SLOB is not set
|
|
|
|
|
# CONFIG_PROFILING is not set
|
|
|
|
|
# CONFIG_MARKERS is not set
|
|
|
|
|
CONFIG_HAVE_OPROFILE=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
|
|
|
|
|
CONFIG_HAVE_IOREMAP_PROT=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_HAVE_KPROBES=y
|
|
|
|
|
CONFIG_HAVE_KRETPROBES=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
2009-07-30 00:34:01 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# GCOV-based kernel profiling
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SLOW_WORK is not set
|
|
|
|
|
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_SLABINFO=y
|
|
|
|
|
CONFIG_RT_MUTEXES=y
|
|
|
|
|
CONFIG_BASE_SMALL=0
|
|
|
|
|
CONFIG_MODULES=y
|
|
|
|
|
# CONFIG_MODULE_FORCE_LOAD is not set
|
|
|
|
|
CONFIG_MODULE_UNLOAD=y
|
|
|
|
|
CONFIG_MODULE_FORCE_UNLOAD=y
|
|
|
|
|
# CONFIG_MODVERSIONS is not set
|
|
|
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
|
|
|
CONFIG_BLOCK=y
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_LBDAF=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_BLK_DEV_BSG is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_BLK_DEV_INTEGRITY is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# IO Schedulers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_IOSCHED_NOOP=y
|
|
|
|
|
CONFIG_IOSCHED_AS=y
|
|
|
|
|
CONFIG_IOSCHED_DEADLINE=y
|
|
|
|
|
CONFIG_IOSCHED_CFQ=y
|
|
|
|
|
CONFIG_DEFAULT_AS=y
|
|
|
|
|
# CONFIG_DEFAULT_DEADLINE is not set
|
|
|
|
|
# CONFIG_DEFAULT_CFQ is not set
|
|
|
|
|
# CONFIG_DEFAULT_NOOP is not set
|
|
|
|
|
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_FREEZER is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Platform support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PPC_CELL is not set
|
|
|
|
|
# CONFIG_PPC_CELL_NATIVE is not set
|
|
|
|
|
# CONFIG_PQ2ADS is not set
|
|
|
|
|
CONFIG_MPC85xx=y
|
|
|
|
|
# CONFIG_MPC8540_ADS is not set
|
|
|
|
|
# CONFIG_MPC8560_ADS is not set
|
|
|
|
|
# CONFIG_MPC85xx_CDS is not set
|
|
|
|
|
# CONFIG_MPC85xx_MDS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_MPC8536_DS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_MPC85xx_DS is not set
|
|
|
|
|
CONFIG_SOCRATES=y
|
|
|
|
|
# CONFIG_KSI8560 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_XES_MPC85xx is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_STX_GP3 is not set
|
|
|
|
|
# CONFIG_TQM8540 is not set
|
|
|
|
|
# CONFIG_TQM8541 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_TQM8548 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_TQM8555 is not set
|
|
|
|
|
# CONFIG_TQM8560 is not set
|
|
|
|
|
# CONFIG_SBC8548 is not set
|
|
|
|
|
# CONFIG_SBC8560 is not set
|
|
|
|
|
# CONFIG_IPIC is not set
|
|
|
|
|
CONFIG_MPIC=y
|
|
|
|
|
# CONFIG_MPIC_WEIRD is not set
|
|
|
|
|
# CONFIG_PPC_I8259 is not set
|
|
|
|
|
# CONFIG_PPC_RTAS is not set
|
|
|
|
|
# CONFIG_MMIO_NVRAM is not set
|
|
|
|
|
# CONFIG_PPC_MPC106 is not set
|
|
|
|
|
# CONFIG_PPC_970_NAP is not set
|
|
|
|
|
# CONFIG_PPC_INDIRECT_IO is not set
|
|
|
|
|
# CONFIG_GENERIC_IOMAP is not set
|
|
|
|
|
# CONFIG_CPU_FREQ is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_QUICC_ENGINE is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CPM2 is not set
|
|
|
|
|
# CONFIG_FSL_ULI1575 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_MPC8xxx_GPIO is not set
|
|
|
|
|
# CONFIG_SIMPLE_GPIO is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Kernel options
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_HIGHMEM is not set
|
|
|
|
|
# CONFIG_NO_HZ is not set
|
|
|
|
|
# CONFIG_HIGH_RES_TIMERS is not set
|
|
|
|
|
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
|
|
|
# CONFIG_HZ_100 is not set
|
|
|
|
|
CONFIG_HZ_250=y
|
|
|
|
|
# CONFIG_HZ_300 is not set
|
|
|
|
|
# CONFIG_HZ_1000 is not set
|
|
|
|
|
CONFIG_HZ=250
|
|
|
|
|
# CONFIG_SCHED_HRTICK is not set
|
|
|
|
|
CONFIG_PREEMPT_NONE=y
|
|
|
|
|
# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
|
|
|
# CONFIG_PREEMPT is not set
|
|
|
|
|
CONFIG_BINFMT_ELF=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
|
|
|
|
# CONFIG_HAVE_AOUT is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_BINFMT_MISC is not set
|
|
|
|
|
CONFIG_MATH_EMULATION=y
|
|
|
|
|
# CONFIG_IOMMU_HELPER is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_SWIOTLB is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
|
|
|
|
CONFIG_ARCH_HAS_WALK_MEMORY=y
|
|
|
|
|
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
|
|
|
|
|
CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
|
|
|
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
|
|
|
CONFIG_SELECT_MEMORY_MODEL=y
|
|
|
|
|
CONFIG_FLATMEM_MANUAL=y
|
|
|
|
|
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
|
|
|
# CONFIG_SPARSEMEM_MANUAL is not set
|
|
|
|
|
CONFIG_FLATMEM=y
|
|
|
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
|
|
|
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
|
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_MIGRATION=y
|
|
|
|
|
# CONFIG_PHYS_ADDR_T_64BIT is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_ZONE_DMA_FLAG=1
|
|
|
|
|
CONFIG_BOUNCE=y
|
|
|
|
|
CONFIG_VIRT_TO_BUS=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_HAVE_MLOCK=y
|
|
|
|
|
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_PPC_4K_PAGES=y
|
|
|
|
|
# CONFIG_PPC_16K_PAGES is not set
|
|
|
|
|
# CONFIG_PPC_64K_PAGES is not set
|
|
|
|
|
# CONFIG_PPC_256K_PAGES is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_FORCE_MAX_ZONEORDER=11
|
|
|
|
|
# CONFIG_PROC_DEVICETREE is not set
|
|
|
|
|
# CONFIG_CMDLINE_BOOL is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_EXTRA_TARGETS=""
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_PM is not set
|
|
|
|
|
CONFIG_SECCOMP=y
|
|
|
|
|
CONFIG_ISA_DMA_API=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Bus options
|
|
|
|
|
#
|
|
|
|
|
CONFIG_ZONE_DMA=y
|
|
|
|
|
CONFIG_PPC_INDIRECT_PCI=y
|
|
|
|
|
CONFIG_FSL_SOC=y
|
|
|
|
|
CONFIG_FSL_PCI=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_PPC_PCI_CHOICE=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_PCI=y
|
|
|
|
|
CONFIG_PCI_DOMAINS=y
|
|
|
|
|
CONFIG_PCI_SYSCALL=y
|
|
|
|
|
# CONFIG_PCIEPORTBUS is not set
|
|
|
|
|
CONFIG_ARCH_SUPPORTS_MSI=y
|
|
|
|
|
# CONFIG_PCI_MSI is not set
|
|
|
|
|
CONFIG_PCI_LEGACY=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_PCI_STUB is not set
|
|
|
|
|
# CONFIG_PCI_IOV is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_HAS_RAPIDIO is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Advanced setup
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_ADVANCED_OPTIONS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Default settings for advanced configuration options are used
|
|
|
|
|
#
|
|
|
|
|
CONFIG_LOWMEM_SIZE=0x30000000
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_LOWMEM_CAM_NUM=3
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_PAGE_OFFSET=0xc0000000
|
|
|
|
|
CONFIG_KERNEL_START=0xc0000000
|
|
|
|
|
CONFIG_PHYSICAL_START=0x00000000
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_PHYSICAL_ALIGN=0x04000000
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_TASK_SIZE=0xc0000000
|
|
|
|
|
CONFIG_NET=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Networking options
|
|
|
|
|
#
|
|
|
|
|
CONFIG_PACKET=y
|
|
|
|
|
# CONFIG_PACKET_MMAP is not set
|
|
|
|
|
CONFIG_UNIX=y
|
|
|
|
|
CONFIG_XFRM=y
|
|
|
|
|
# CONFIG_XFRM_USER is not set
|
|
|
|
|
# CONFIG_XFRM_SUB_POLICY is not set
|
|
|
|
|
# CONFIG_XFRM_MIGRATE is not set
|
|
|
|
|
# CONFIG_XFRM_STATISTICS is not set
|
|
|
|
|
# CONFIG_NET_KEY is not set
|
|
|
|
|
CONFIG_INET=y
|
|
|
|
|
CONFIG_IP_MULTICAST=y
|
|
|
|
|
# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
|
|
|
CONFIG_IP_FIB_HASH=y
|
|
|
|
|
CONFIG_IP_PNP=y
|
|
|
|
|
CONFIG_IP_PNP_DHCP=y
|
|
|
|
|
CONFIG_IP_PNP_BOOTP=y
|
|
|
|
|
# CONFIG_IP_PNP_RARP is not set
|
|
|
|
|
# CONFIG_NET_IPIP is not set
|
|
|
|
|
# CONFIG_NET_IPGRE is not set
|
|
|
|
|
# CONFIG_IP_MROUTE is not set
|
|
|
|
|
# CONFIG_ARPD is not set
|
|
|
|
|
CONFIG_SYN_COOKIES=y
|
|
|
|
|
# CONFIG_INET_AH is not set
|
|
|
|
|
# CONFIG_INET_ESP is not set
|
|
|
|
|
# CONFIG_INET_IPCOMP is not set
|
|
|
|
|
# CONFIG_INET_XFRM_TUNNEL is not set
|
|
|
|
|
# CONFIG_INET_TUNNEL is not set
|
|
|
|
|
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
|
|
|
|
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
|
|
|
|
CONFIG_INET_XFRM_MODE_BEET=y
|
|
|
|
|
# CONFIG_INET_LRO is not set
|
|
|
|
|
CONFIG_INET_DIAG=y
|
|
|
|
|
CONFIG_INET_TCP_DIAG=y
|
|
|
|
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
|
|
|
|
CONFIG_TCP_CONG_CUBIC=y
|
|
|
|
|
CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
|
|
|
# CONFIG_TCP_MD5SIG is not set
|
|
|
|
|
# CONFIG_IPV6 is not set
|
|
|
|
|
# CONFIG_NETWORK_SECMARK is not set
|
|
|
|
|
# CONFIG_NETFILTER is not set
|
|
|
|
|
# CONFIG_IP_DCCP is not set
|
|
|
|
|
# CONFIG_IP_SCTP is not set
|
|
|
|
|
# CONFIG_TIPC is not set
|
|
|
|
|
# CONFIG_ATM is not set
|
|
|
|
|
# CONFIG_BRIDGE is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_NET_DSA is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_VLAN_8021Q is not set
|
|
|
|
|
# CONFIG_DECNET is not set
|
|
|
|
|
# CONFIG_LLC2 is not set
|
|
|
|
|
# CONFIG_IPX is not set
|
|
|
|
|
# CONFIG_ATALK is not set
|
|
|
|
|
# CONFIG_X25 is not set
|
|
|
|
|
# CONFIG_LAPB is not set
|
|
|
|
|
# CONFIG_ECONET is not set
|
|
|
|
|
# CONFIG_WAN_ROUTER is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_PHONET is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_IEEE802154 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_NET_SCHED is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_DCB is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Network testing
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_NET_PKTGEN is not set
|
|
|
|
|
# CONFIG_HAMRADIO is not set
|
|
|
|
|
CONFIG_CAN=y
|
|
|
|
|
CONFIG_CAN_RAW=y
|
|
|
|
|
CONFIG_CAN_BCM=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# CAN Device Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CAN_VCAN is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_CAN_DEV is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CAN_DEBUG_DEVICES is not set
|
|
|
|
|
# CONFIG_IRDA is not set
|
|
|
|
|
# CONFIG_BT is not set
|
|
|
|
|
# CONFIG_AF_RXRPC is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_WIRELESS=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CFG80211 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_WIRELESS_OLD_REGULATORY is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_WIRELESS_EXT is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_LIB80211 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# CFG80211 needs to be enabled for MAC80211
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MAC80211_DEFAULT_PS_VALUE=0
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_WIMAX is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_RFKILL is not set
|
|
|
|
|
# CONFIG_NET_9P is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Device Drivers
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Generic Driver Options
|
|
|
|
|
#
|
|
|
|
|
CONFIG_STANDALONE=y
|
|
|
|
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
|
|
|
# CONFIG_SYS_HYPERVISOR is not set
|
|
|
|
|
# CONFIG_CONNECTOR is not set
|
|
|
|
|
CONFIG_MTD=y
|
|
|
|
|
# CONFIG_MTD_DEBUG is not set
|
|
|
|
|
CONFIG_MTD_CONCAT=y
|
|
|
|
|
CONFIG_MTD_PARTITIONS=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_MTD_TESTS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
|
|
|
CONFIG_MTD_CMDLINE_PARTS=y
|
|
|
|
|
CONFIG_MTD_OF_PARTS=y
|
|
|
|
|
# CONFIG_MTD_AR7_PARTS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# User Modules And Translation Layers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MTD_CHAR=y
|
|
|
|
|
CONFIG_MTD_BLKDEVS=y
|
|
|
|
|
CONFIG_MTD_BLOCK=y
|
|
|
|
|
# CONFIG_FTL is not set
|
|
|
|
|
# CONFIG_NFTL is not set
|
|
|
|
|
# CONFIG_INFTL is not set
|
|
|
|
|
# CONFIG_RFD_FTL is not set
|
|
|
|
|
# CONFIG_SSFDC is not set
|
|
|
|
|
# CONFIG_MTD_OOPS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# RAM/ROM/Flash chip drivers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MTD_CFI=y
|
|
|
|
|
CONFIG_MTD_JEDECPROBE=y
|
|
|
|
|
CONFIG_MTD_GEN_PROBE=y
|
|
|
|
|
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
|
|
|
|
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
|
|
|
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
|
|
|
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
|
|
|
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
|
|
|
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
|
|
|
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
|
|
|
CONFIG_MTD_CFI_I1=y
|
|
|
|
|
CONFIG_MTD_CFI_I2=y
|
|
|
|
|
# CONFIG_MTD_CFI_I4 is not set
|
|
|
|
|
# CONFIG_MTD_CFI_I8 is not set
|
|
|
|
|
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
|
|
|
CONFIG_MTD_CFI_AMDSTD=y
|
|
|
|
|
# CONFIG_MTD_CFI_STAA is not set
|
|
|
|
|
CONFIG_MTD_CFI_UTIL=y
|
|
|
|
|
# CONFIG_MTD_RAM is not set
|
|
|
|
|
# CONFIG_MTD_ROM is not set
|
|
|
|
|
# CONFIG_MTD_ABSENT is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Mapping drivers for chip access
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
|
|
|
# CONFIG_MTD_PHYSMAP is not set
|
|
|
|
|
CONFIG_MTD_PHYSMAP_OF=y
|
|
|
|
|
# CONFIG_MTD_INTEL_VR_NOR is not set
|
|
|
|
|
# CONFIG_MTD_PLATRAM is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Self-contained MTD device drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_PMC551 is not set
|
|
|
|
|
# CONFIG_MTD_DATAFLASH is not set
|
|
|
|
|
# CONFIG_MTD_M25P80 is not set
|
|
|
|
|
# CONFIG_MTD_SLRAM is not set
|
|
|
|
|
# CONFIG_MTD_PHRAM is not set
|
|
|
|
|
# CONFIG_MTD_MTDRAM is not set
|
|
|
|
|
# CONFIG_MTD_BLOCK2MTD is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Disk-On-Chip Device Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_DOC2000 is not set
|
|
|
|
|
# CONFIG_MTD_DOC2001 is not set
|
|
|
|
|
# CONFIG_MTD_DOC2001PLUS is not set
|
|
|
|
|
CONFIG_MTD_NAND=y
|
|
|
|
|
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
|
|
|
# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
|
|
|
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
|
|
|
CONFIG_MTD_NAND_IDS=y
|
|
|
|
|
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
|
|
|
# CONFIG_MTD_NAND_CAFE is not set
|
|
|
|
|
# CONFIG_MTD_NAND_NANDSIM is not set
|
|
|
|
|
# CONFIG_MTD_NAND_PLATFORM is not set
|
|
|
|
|
# CONFIG_MTD_ALAUDA is not set
|
|
|
|
|
# CONFIG_MTD_NAND_FSL_ELBC is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_MTD_NAND_FSL_UPM is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_MTD_NAND_SOCRATES=y
|
|
|
|
|
# CONFIG_MTD_ONENAND is not set
|
|
|
|
|
|
2009-05-13 18:24:50 -04:00
|
|
|
#
|
|
|
|
|
# LPDDR flash memory drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_LPDDR is not set
|
|
|
|
|
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
#
|
|
|
|
|
# UBI - Unsorted block images
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MTD_UBI is not set
|
|
|
|
|
CONFIG_OF_DEVICE=y
|
|
|
|
|
CONFIG_OF_I2C=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_OF_SPI=y
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_OF_MDIO=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_PARPORT is not set
|
|
|
|
|
CONFIG_BLK_DEV=y
|
|
|
|
|
# CONFIG_BLK_DEV_FD is not set
|
|
|
|
|
# CONFIG_BLK_CPQ_DA is not set
|
|
|
|
|
# CONFIG_BLK_CPQ_CISS_DA is not set
|
|
|
|
|
# CONFIG_BLK_DEV_DAC960 is not set
|
|
|
|
|
# CONFIG_BLK_DEV_UMEM is not set
|
|
|
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
|
|
|
CONFIG_BLK_DEV_LOOP=y
|
|
|
|
|
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
|
|
|
# CONFIG_BLK_DEV_NBD is not set
|
|
|
|
|
# CONFIG_BLK_DEV_SX8 is not set
|
|
|
|
|
# CONFIG_BLK_DEV_UB is not set
|
|
|
|
|
CONFIG_BLK_DEV_RAM=y
|
|
|
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
|
|
|
CONFIG_BLK_DEV_RAM_SIZE=32768
|
|
|
|
|
# CONFIG_BLK_DEV_XIP is not set
|
|
|
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
|
|
|
# CONFIG_ATA_OVER_ETH is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_BLK_DEV_HD is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_MISC_DEVICES=y
|
|
|
|
|
# CONFIG_PHANTOM is not set
|
|
|
|
|
# CONFIG_SGI_IOC4 is not set
|
|
|
|
|
# CONFIG_TIFM_CORE is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_ICS932S401 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_ENCLOSURE_SERVICES is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_HP_ILO is not set
|
|
|
|
|
# CONFIG_ISL29003 is not set
|
|
|
|
|
# CONFIG_C2PORT is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# EEPROM support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_EEPROM_AT24 is not set
|
|
|
|
|
# CONFIG_EEPROM_AT25 is not set
|
|
|
|
|
# CONFIG_EEPROM_LEGACY is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_EEPROM_MAX6875 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_EEPROM_93CX6 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_CB710_CORE is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_HAVE_IDE=y
|
|
|
|
|
# CONFIG_IDE is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SCSI device support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_RAID_ATTRS is not set
|
|
|
|
|
CONFIG_SCSI=y
|
|
|
|
|
CONFIG_SCSI_DMA=y
|
|
|
|
|
# CONFIG_SCSI_TGT is not set
|
|
|
|
|
# CONFIG_SCSI_NETLINK is not set
|
|
|
|
|
CONFIG_SCSI_PROC_FS=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SCSI support type (disk, tape, CD-ROM)
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BLK_DEV_SD=y
|
|
|
|
|
# CONFIG_CHR_DEV_ST is not set
|
|
|
|
|
# CONFIG_CHR_DEV_OSST is not set
|
|
|
|
|
# CONFIG_BLK_DEV_SR is not set
|
|
|
|
|
# CONFIG_CHR_DEV_SG is not set
|
|
|
|
|
# CONFIG_CHR_DEV_SCH is not set
|
|
|
|
|
# CONFIG_SCSI_MULTI_LUN is not set
|
|
|
|
|
# CONFIG_SCSI_CONSTANTS is not set
|
|
|
|
|
# CONFIG_SCSI_LOGGING is not set
|
|
|
|
|
# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
|
|
|
CONFIG_SCSI_WAIT_SCAN=m
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SCSI Transports
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SCSI_SPI_ATTRS is not set
|
|
|
|
|
# CONFIG_SCSI_FC_ATTRS is not set
|
|
|
|
|
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
|
|
|
# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
|
|
|
# CONFIG_SCSI_SRP_ATTRS is not set
|
|
|
|
|
# CONFIG_SCSI_LOWLEVEL is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SCSI_DH is not set
|
|
|
|
|
# CONFIG_SCSI_OSD_INITIATOR is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_ATA is not set
|
|
|
|
|
# CONFIG_MD is not set
|
|
|
|
|
# CONFIG_FUSION is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# IEEE 1394 (FireWire) support
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
2009-07-30 00:34:01 -04:00
|
|
|
# You can enable one or both FireWire driver stacks.
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# See the help texts for more information.
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
#
|
|
|
|
|
# CONFIG_FIREWIRE is not set
|
|
|
|
|
# CONFIG_IEEE1394 is not set
|
|
|
|
|
# CONFIG_I2O is not set
|
|
|
|
|
# CONFIG_MACINTOSH_DRIVERS is not set
|
|
|
|
|
CONFIG_NETDEVICES=y
|
|
|
|
|
# CONFIG_DUMMY is not set
|
|
|
|
|
# CONFIG_BONDING is not set
|
|
|
|
|
# CONFIG_MACVLAN is not set
|
|
|
|
|
# CONFIG_EQUALIZER is not set
|
|
|
|
|
# CONFIG_TUN is not set
|
|
|
|
|
# CONFIG_VETH is not set
|
|
|
|
|
# CONFIG_ARCNET is not set
|
|
|
|
|
CONFIG_PHYLIB=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# MII PHY device drivers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_MARVELL_PHY=y
|
|
|
|
|
# CONFIG_DAVICOM_PHY is not set
|
|
|
|
|
# CONFIG_QSEMI_PHY is not set
|
|
|
|
|
# CONFIG_LXT_PHY is not set
|
|
|
|
|
# CONFIG_CICADA_PHY is not set
|
|
|
|
|
# CONFIG_VITESSE_PHY is not set
|
|
|
|
|
# CONFIG_SMSC_PHY is not set
|
|
|
|
|
# CONFIG_BROADCOM_PHY is not set
|
|
|
|
|
# CONFIG_ICPLUS_PHY is not set
|
|
|
|
|
# CONFIG_REALTEK_PHY is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_NATIONAL_PHY is not set
|
|
|
|
|
# CONFIG_STE10XP is not set
|
|
|
|
|
# CONFIG_LSI_ET1011C_PHY is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_FIXED_PHY is not set
|
|
|
|
|
# CONFIG_MDIO_BITBANG is not set
|
|
|
|
|
CONFIG_NET_ETHERNET=y
|
|
|
|
|
CONFIG_MII=y
|
|
|
|
|
# CONFIG_HAPPYMEAL is not set
|
|
|
|
|
# CONFIG_SUNGEM is not set
|
|
|
|
|
# CONFIG_CASSINI is not set
|
|
|
|
|
# CONFIG_NET_VENDOR_3COM is not set
|
|
|
|
|
# CONFIG_ENC28J60 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_ETHOC is not set
|
|
|
|
|
# CONFIG_DNET is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_NET_TULIP is not set
|
|
|
|
|
# CONFIG_HP100 is not set
|
|
|
|
|
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
|
|
|
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
|
|
|
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
|
|
|
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
|
|
|
|
|
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
|
|
|
|
|
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_NET_PCI is not set
|
|
|
|
|
# CONFIG_B44 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_KS8842 is not set
|
|
|
|
|
# CONFIG_KS8851 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_ATL2 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_NETDEV_1000=y
|
|
|
|
|
# CONFIG_ACENIC is not set
|
|
|
|
|
# CONFIG_DL2K is not set
|
|
|
|
|
# CONFIG_E1000 is not set
|
|
|
|
|
# CONFIG_E1000E is not set
|
|
|
|
|
# CONFIG_IP1000 is not set
|
|
|
|
|
# CONFIG_IGB is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_IGBVF is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_NS83820 is not set
|
|
|
|
|
# CONFIG_HAMACHI is not set
|
|
|
|
|
# CONFIG_YELLOWFIN is not set
|
|
|
|
|
# CONFIG_R8169 is not set
|
|
|
|
|
# CONFIG_SIS190 is not set
|
|
|
|
|
# CONFIG_SKGE is not set
|
|
|
|
|
# CONFIG_SKY2 is not set
|
|
|
|
|
# CONFIG_VIA_VELOCITY is not set
|
|
|
|
|
# CONFIG_TIGON3 is not set
|
|
|
|
|
# CONFIG_BNX2 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_CNIC is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_FSL_PQ_MDIO=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_GIANFAR=y
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_MV643XX_ETH is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_QLA3XXX is not set
|
|
|
|
|
# CONFIG_ATL1 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_ATL1E is not set
|
|
|
|
|
# CONFIG_ATL1C is not set
|
|
|
|
|
# CONFIG_JME is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_NETDEV_10000 is not set
|
|
|
|
|
# CONFIG_TR is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Wireless LAN
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_WLAN_PRE80211 is not set
|
|
|
|
|
# CONFIG_WLAN_80211 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Enable WiMAX (Networking options) to see the WiMAX drivers
|
|
|
|
|
#
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB Network Adapters
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_USB_CATC is not set
|
|
|
|
|
# CONFIG_USB_KAWETH is not set
|
|
|
|
|
# CONFIG_USB_PEGASUS is not set
|
|
|
|
|
# CONFIG_USB_RTL8150 is not set
|
|
|
|
|
# CONFIG_USB_USBNET is not set
|
|
|
|
|
# CONFIG_WAN is not set
|
|
|
|
|
# CONFIG_FDDI is not set
|
|
|
|
|
# CONFIG_HIPPI is not set
|
|
|
|
|
# CONFIG_PPP is not set
|
|
|
|
|
# CONFIG_SLIP is not set
|
|
|
|
|
# CONFIG_NET_FC is not set
|
|
|
|
|
# CONFIG_NETCONSOLE is not set
|
|
|
|
|
# CONFIG_NETPOLL is not set
|
|
|
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
|
|
|
# CONFIG_ISDN is not set
|
|
|
|
|
# CONFIG_PHONE is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Input device support
|
|
|
|
|
#
|
|
|
|
|
CONFIG_INPUT=y
|
|
|
|
|
# CONFIG_INPUT_FF_MEMLESS is not set
|
|
|
|
|
# CONFIG_INPUT_POLLDEV is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Userland interfaces
|
|
|
|
|
#
|
|
|
|
|
CONFIG_INPUT_MOUSEDEV=y
|
|
|
|
|
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
|
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
|
|
|
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
|
|
|
|
|
# CONFIG_INPUT_JOYDEV is not set
|
|
|
|
|
CONFIG_INPUT_EVDEV=y
|
|
|
|
|
# CONFIG_INPUT_EVBUG is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Input Device Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_INPUT_KEYBOARD is not set
|
|
|
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
|
|
|
# CONFIG_INPUT_JOYSTICK is not set
|
|
|
|
|
# CONFIG_INPUT_TABLET is not set
|
|
|
|
|
CONFIG_INPUT_TOUCHSCREEN=y
|
|
|
|
|
# CONFIG_TOUCHSCREEN_ADS7846 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_AD7877 is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_AD7879 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_EETI is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_FUJITSU is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_GUNZE is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_ELO is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_MTOUCH is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_INEXIO is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_MK712 is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
|
|
|
|
|
# CONFIG_TOUCHSCREEN_TSC2007 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_TOUCHSCREEN_W90X900 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_INPUT_MISC is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Hardware I/O ports
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SERIO is not set
|
|
|
|
|
# CONFIG_GAMEPORT is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Character devices
|
|
|
|
|
#
|
|
|
|
|
CONFIG_VT=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_CONSOLE_TRANSLATIONS=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_VT_CONSOLE=y
|
|
|
|
|
CONFIG_HW_CONSOLE=y
|
|
|
|
|
# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
|
|
|
|
CONFIG_DEVKMEM=y
|
|
|
|
|
# CONFIG_SERIAL_NONSTANDARD is not set
|
|
|
|
|
# CONFIG_NOZOMI is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Serial drivers
|
|
|
|
|
#
|
|
|
|
|
CONFIG_SERIAL_8250=y
|
|
|
|
|
CONFIG_SERIAL_8250_CONSOLE=y
|
|
|
|
|
CONFIG_SERIAL_8250_PCI=y
|
|
|
|
|
CONFIG_SERIAL_8250_NR_UARTS=2
|
|
|
|
|
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
|
|
|
|
CONFIG_SERIAL_8250_EXTENDED=y
|
|
|
|
|
CONFIG_SERIAL_8250_MANY_PORTS=y
|
|
|
|
|
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
|
|
|
|
CONFIG_SERIAL_8250_DETECT_IRQ=y
|
|
|
|
|
CONFIG_SERIAL_8250_RSA=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Non-8250 serial port support
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SERIAL_MAX3100 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SERIAL_UARTLITE is not set
|
|
|
|
|
CONFIG_SERIAL_CORE=y
|
|
|
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
|
|
|
|
# CONFIG_SERIAL_JSM is not set
|
|
|
|
|
# CONFIG_SERIAL_OF_PLATFORM is not set
|
|
|
|
|
CONFIG_UNIX98_PTYS=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_LEGACY_PTYS=y
|
|
|
|
|
CONFIG_LEGACY_PTY_COUNT=256
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_HVC_UDBG is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
|
|
|
CONFIG_HW_RANDOM=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_NVRAM is not set
|
|
|
|
|
# CONFIG_R3964 is not set
|
|
|
|
|
# CONFIG_APPLICOM is not set
|
|
|
|
|
# CONFIG_RAW_DRIVER is not set
|
|
|
|
|
# CONFIG_TCG_TPM is not set
|
|
|
|
|
CONFIG_DEVPORT=y
|
|
|
|
|
CONFIG_I2C=y
|
|
|
|
|
CONFIG_I2C_BOARDINFO=y
|
|
|
|
|
CONFIG_I2C_CHARDEV=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_I2C_HELPER_AUTO=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# I2C Hardware Bus support
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# PC SMBus host controller drivers
|
|
|
|
|
#
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_I2C_ALI1535 is not set
|
|
|
|
|
# CONFIG_I2C_ALI1563 is not set
|
|
|
|
|
# CONFIG_I2C_ALI15X3 is not set
|
|
|
|
|
# CONFIG_I2C_AMD756 is not set
|
|
|
|
|
# CONFIG_I2C_AMD8111 is not set
|
|
|
|
|
# CONFIG_I2C_I801 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_I2C_ISCH is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_I2C_PIIX4 is not set
|
|
|
|
|
# CONFIG_I2C_NFORCE2 is not set
|
|
|
|
|
# CONFIG_I2C_SIS5595 is not set
|
|
|
|
|
# CONFIG_I2C_SIS630 is not set
|
|
|
|
|
# CONFIG_I2C_SIS96X is not set
|
|
|
|
|
# CONFIG_I2C_VIA is not set
|
|
|
|
|
# CONFIG_I2C_VIAPRO is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# I2C system bus drivers (mostly embedded / system-on-chip)
|
|
|
|
|
#
|
|
|
|
|
CONFIG_I2C_MPC=y
|
|
|
|
|
# CONFIG_I2C_OCORES is not set
|
|
|
|
|
# CONFIG_I2C_SIMTEC is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# External I2C/SMBus adapter drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
|
|
|
# CONFIG_I2C_TAOS_EVM is not set
|
|
|
|
|
# CONFIG_I2C_TINY_USB is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Graphics adapter I2C/DDC channel drivers
|
|
|
|
|
#
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_I2C_VOODOO3 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Other I2C/SMBus bus drivers
|
|
|
|
|
#
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_I2C_PCA_PLATFORM is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_I2C_STUB is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Miscellaneous I2C Chip support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_DS1682 is not set
|
|
|
|
|
# CONFIG_SENSORS_PCF8574 is not set
|
|
|
|
|
# CONFIG_PCF8575 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_PCA9539 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_TSL2550 is not set
|
|
|
|
|
# CONFIG_I2C_DEBUG_CORE is not set
|
|
|
|
|
# CONFIG_I2C_DEBUG_ALGO is not set
|
|
|
|
|
# CONFIG_I2C_DEBUG_BUS is not set
|
|
|
|
|
# CONFIG_I2C_DEBUG_CHIP is not set
|
|
|
|
|
CONFIG_SPI=y
|
|
|
|
|
CONFIG_SPI_MASTER=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SPI Master Controller Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SPI_BITBANG is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_SPI_MPC8xxx is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SPI Protocol Masters
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SPI_SPIDEV is not set
|
|
|
|
|
# CONFIG_SPI_TLE62X0 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# PPS support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PPS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
|
|
|
|
|
# CONFIG_GPIOLIB is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_W1 is not set
|
|
|
|
|
# CONFIG_POWER_SUPPLY is not set
|
|
|
|
|
CONFIG_HWMON=y
|
|
|
|
|
CONFIG_HWMON_VID=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_AD7414 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_AD7418 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_ADCXX is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_ADM1021 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM1025 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM1026 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM1029 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM1031 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADM9240 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_ADT7462 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_ADT7470 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADT7473 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_ADT7475 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_ATXP1 is not set
|
|
|
|
|
# CONFIG_SENSORS_DS1621 is not set
|
|
|
|
|
# CONFIG_SENSORS_I5K_AMB is not set
|
|
|
|
|
# CONFIG_SENSORS_F71805F is not set
|
|
|
|
|
# CONFIG_SENSORS_F71882FG is not set
|
|
|
|
|
# CONFIG_SENSORS_F75375S is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_G760A is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_GL518SM is not set
|
|
|
|
|
# CONFIG_SENSORS_GL520SM is not set
|
|
|
|
|
# CONFIG_SENSORS_IT87 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM63 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM70 is not set
|
|
|
|
|
CONFIG_SENSORS_LM75=y
|
|
|
|
|
# CONFIG_SENSORS_LM77 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM78 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM80 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM83 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM85 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM87 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM90 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM92 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM93 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_LTC4215 is not set
|
|
|
|
|
# CONFIG_SENSORS_LTC4245 is not set
|
|
|
|
|
# CONFIG_SENSORS_LM95241 is not set
|
|
|
|
|
# CONFIG_SENSORS_MAX1111 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_MAX1619 is not set
|
|
|
|
|
# CONFIG_SENSORS_MAX6650 is not set
|
|
|
|
|
# CONFIG_SENSORS_PC87360 is not set
|
|
|
|
|
# CONFIG_SENSORS_PC87427 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_PCF8591 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_SIS5595 is not set
|
|
|
|
|
# CONFIG_SENSORS_DME1737 is not set
|
|
|
|
|
# CONFIG_SENSORS_SMSC47M1 is not set
|
|
|
|
|
# CONFIG_SENSORS_SMSC47M192 is not set
|
|
|
|
|
# CONFIG_SENSORS_SMSC47B397 is not set
|
|
|
|
|
# CONFIG_SENSORS_ADS7828 is not set
|
|
|
|
|
# CONFIG_SENSORS_THMC50 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_SENSORS_TMP401 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SENSORS_VIA686A is not set
|
|
|
|
|
# CONFIG_SENSORS_VT1211 is not set
|
|
|
|
|
# CONFIG_SENSORS_VT8231 is not set
|
|
|
|
|
CONFIG_SENSORS_W83781D=y
|
|
|
|
|
# CONFIG_SENSORS_W83791D is not set
|
|
|
|
|
# CONFIG_SENSORS_W83792D is not set
|
|
|
|
|
# CONFIG_SENSORS_W83793 is not set
|
|
|
|
|
# CONFIG_SENSORS_W83L785TS is not set
|
|
|
|
|
# CONFIG_SENSORS_W83L786NG is not set
|
|
|
|
|
# CONFIG_SENSORS_W83627HF is not set
|
|
|
|
|
# CONFIG_SENSORS_W83627EHF is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SENSORS_LIS3_SPI is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_HWMON_DEBUG_CHIP=y
|
|
|
|
|
# CONFIG_THERMAL is not set
|
|
|
|
|
# CONFIG_THERMAL_HWMON is not set
|
|
|
|
|
# CONFIG_WATCHDOG is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_SSB_POSSIBLE=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Sonics Silicon Backplane
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_SSB is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Multifunction device drivers
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_MFD_CORE is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_MFD_SM501 is not set
|
|
|
|
|
# CONFIG_HTC_PASIC3 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_TWL4030_CORE is not set
|
|
|
|
|
# CONFIG_MFD_TMIO is not set
|
|
|
|
|
# CONFIG_PMIC_DA903X is not set
|
|
|
|
|
# CONFIG_MFD_WM8400 is not set
|
|
|
|
|
# CONFIG_MFD_WM8350_I2C is not set
|
|
|
|
|
# CONFIG_MFD_PCF50633 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_AB3100_CORE is not set
|
|
|
|
|
# CONFIG_EZX_PCAP is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_REGULATOR is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_MEDIA_SUPPORT is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Graphics support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_AGP is not set
|
|
|
|
|
# CONFIG_DRM is not set
|
|
|
|
|
# CONFIG_VGASTATE is not set
|
|
|
|
|
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
|
|
|
CONFIG_FB=y
|
|
|
|
|
# CONFIG_FIRMWARE_EDID is not set
|
|
|
|
|
# CONFIG_FB_DDC is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_FB_CFB_FILLRECT=y
|
|
|
|
|
CONFIG_FB_CFB_COPYAREA=y
|
|
|
|
|
CONFIG_FB_CFB_IMAGEBLIT=y
|
|
|
|
|
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
|
|
|
# CONFIG_FB_SYS_FILLRECT is not set
|
|
|
|
|
# CONFIG_FB_SYS_COPYAREA is not set
|
|
|
|
|
# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
|
|
|
CONFIG_FB_FOREIGN_ENDIAN=y
|
|
|
|
|
CONFIG_FB_BOTH_ENDIAN=y
|
|
|
|
|
# CONFIG_FB_BIG_ENDIAN is not set
|
|
|
|
|
# CONFIG_FB_LITTLE_ENDIAN is not set
|
|
|
|
|
# CONFIG_FB_SYS_FOPS is not set
|
|
|
|
|
# CONFIG_FB_SVGALIB is not set
|
|
|
|
|
# CONFIG_FB_MACMODES is not set
|
|
|
|
|
# CONFIG_FB_BACKLIGHT is not set
|
|
|
|
|
# CONFIG_FB_MODE_HELPERS is not set
|
|
|
|
|
# CONFIG_FB_TILEBLITTING is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Frame buffer hardware drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_FB_CIRRUS is not set
|
|
|
|
|
# CONFIG_FB_PM2 is not set
|
|
|
|
|
# CONFIG_FB_CYBER2000 is not set
|
|
|
|
|
# CONFIG_FB_OF is not set
|
|
|
|
|
# CONFIG_FB_CT65550 is not set
|
|
|
|
|
# CONFIG_FB_ASILIANT is not set
|
|
|
|
|
# CONFIG_FB_IMSTT is not set
|
|
|
|
|
# CONFIG_FB_VGA16 is not set
|
|
|
|
|
# CONFIG_FB_S1D13XXX is not set
|
|
|
|
|
# CONFIG_FB_NVIDIA is not set
|
|
|
|
|
# CONFIG_FB_RIVA is not set
|
|
|
|
|
# CONFIG_FB_MATROX is not set
|
|
|
|
|
# CONFIG_FB_RADEON is not set
|
|
|
|
|
# CONFIG_FB_ATY128 is not set
|
|
|
|
|
# CONFIG_FB_ATY is not set
|
|
|
|
|
# CONFIG_FB_S3 is not set
|
|
|
|
|
# CONFIG_FB_SAVAGE is not set
|
|
|
|
|
# CONFIG_FB_SIS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_FB_VIA is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_FB_NEOMAGIC is not set
|
|
|
|
|
# CONFIG_FB_KYRO is not set
|
|
|
|
|
# CONFIG_FB_3DFX is not set
|
|
|
|
|
# CONFIG_FB_VOODOO1 is not set
|
|
|
|
|
# CONFIG_FB_VT8623 is not set
|
|
|
|
|
# CONFIG_FB_TRIDENT is not set
|
|
|
|
|
# CONFIG_FB_ARK is not set
|
|
|
|
|
# CONFIG_FB_PM3 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_FB_CARMINE is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_FB_FSL_DIU is not set
|
|
|
|
|
# CONFIG_FB_IBM_GXT4500 is not set
|
|
|
|
|
# CONFIG_FB_VIRTUAL is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_FB_METRONOME is not set
|
|
|
|
|
CONFIG_FB_MB862XX=y
|
|
|
|
|
# CONFIG_FB_MB862XX_PCI_GDC is not set
|
|
|
|
|
CONFIG_FB_MB862XX_LIME=y
|
|
|
|
|
# CONFIG_FB_PRE_INIT_FB is not set
|
|
|
|
|
# CONFIG_FB_BROADSHEET is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Display device support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_DISPLAY_SUPPORT is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Console display driver support
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_VGA_CONSOLE is not set
|
|
|
|
|
CONFIG_DUMMY_CONSOLE=y
|
|
|
|
|
CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
|
|
|
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
|
|
|
|
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
|
|
|
CONFIG_FONTS=y
|
|
|
|
|
# CONFIG_FONT_8x8 is not set
|
|
|
|
|
CONFIG_FONT_8x16=y
|
|
|
|
|
# CONFIG_FONT_6x11 is not set
|
|
|
|
|
# CONFIG_FONT_7x14 is not set
|
|
|
|
|
# CONFIG_FONT_PEARL_8x8 is not set
|
|
|
|
|
# CONFIG_FONT_ACORN_8x8 is not set
|
|
|
|
|
# CONFIG_FONT_MINI_4x6 is not set
|
|
|
|
|
# CONFIG_FONT_SUN8x16 is not set
|
|
|
|
|
# CONFIG_FONT_SUN12x22 is not set
|
|
|
|
|
# CONFIG_FONT_10x18 is not set
|
|
|
|
|
# CONFIG_LOGO is not set
|
|
|
|
|
# CONFIG_SOUND is not set
|
|
|
|
|
CONFIG_HID_SUPPORT=y
|
|
|
|
|
CONFIG_HID=y
|
|
|
|
|
# CONFIG_HID_DEBUG is not set
|
|
|
|
|
# CONFIG_HIDRAW is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB Input Devices
|
|
|
|
|
#
|
|
|
|
|
CONFIG_USB_HID=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_HID_PID is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_USB_HIDDEV is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Special HID drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_HID_A4TECH is not set
|
|
|
|
|
# CONFIG_HID_APPLE is not set
|
|
|
|
|
# CONFIG_HID_BELKIN is not set
|
|
|
|
|
# CONFIG_HID_CHERRY is not set
|
|
|
|
|
# CONFIG_HID_CHICONY is not set
|
|
|
|
|
# CONFIG_HID_CYPRESS is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_HID_DRAGONRISE is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_HID_EZKEY is not set
|
|
|
|
|
# CONFIG_HID_KYE is not set
|
|
|
|
|
# CONFIG_HID_GYRATION is not set
|
|
|
|
|
# CONFIG_HID_KENSINGTON is not set
|
|
|
|
|
# CONFIG_HID_LOGITECH is not set
|
|
|
|
|
# CONFIG_HID_MICROSOFT is not set
|
|
|
|
|
# CONFIG_HID_MONTEREY is not set
|
|
|
|
|
# CONFIG_HID_NTRIG is not set
|
|
|
|
|
# CONFIG_HID_PANTHERLORD is not set
|
|
|
|
|
# CONFIG_HID_PETALYNX is not set
|
|
|
|
|
# CONFIG_HID_SAMSUNG is not set
|
|
|
|
|
# CONFIG_HID_SONY is not set
|
|
|
|
|
# CONFIG_HID_SUNPLUS is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_HID_GREENASIA is not set
|
|
|
|
|
# CONFIG_HID_SMARTJOYPLUS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_HID_TOPSEED is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_HID_THRUSTMASTER is not set
|
|
|
|
|
# CONFIG_HID_ZEROPLUS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_USB_SUPPORT=y
|
|
|
|
|
CONFIG_USB_ARCH_HAS_HCD=y
|
|
|
|
|
CONFIG_USB_ARCH_HAS_OHCI=y
|
|
|
|
|
CONFIG_USB_ARCH_HAS_EHCI=y
|
|
|
|
|
CONFIG_USB=y
|
|
|
|
|
# CONFIG_USB_DEBUG is not set
|
|
|
|
|
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Miscellaneous USB options
|
|
|
|
|
#
|
|
|
|
|
CONFIG_USB_DEVICEFS=y
|
|
|
|
|
CONFIG_USB_DEVICE_CLASS=y
|
|
|
|
|
# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
|
|
|
# CONFIG_USB_OTG is not set
|
|
|
|
|
# CONFIG_USB_OTG_WHITELIST is not set
|
|
|
|
|
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_USB_MON=y
|
|
|
|
|
# CONFIG_USB_WUSB is not set
|
|
|
|
|
# CONFIG_USB_WUSB_CBAF is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB Host Controller Drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_USB_C67X00_HCD is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_USB_XHCI_HCD is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_USB_EHCI_HCD=y
|
|
|
|
|
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
|
|
|
|
|
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
|
|
|
|
|
# CONFIG_USB_EHCI_FSL is not set
|
|
|
|
|
CONFIG_USB_EHCI_HCD_PPC_OF=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_USB_OXU210HP_HCD is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_USB_ISP116X_HCD is not set
|
|
|
|
|
# CONFIG_USB_ISP1760_HCD is not set
|
|
|
|
|
CONFIG_USB_OHCI_HCD=y
|
|
|
|
|
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
|
|
|
|
|
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_USB_OHCI_HCD_PPC_OF=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_USB_OHCI_HCD_PCI=y
|
|
|
|
|
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
|
|
|
|
|
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
|
|
|
|
|
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
|
|
|
# CONFIG_USB_UHCI_HCD is not set
|
|
|
|
|
# CONFIG_USB_SL811_HCD is not set
|
|
|
|
|
# CONFIG_USB_R8A66597_HCD is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_USB_WHCI_HCD is not set
|
|
|
|
|
# CONFIG_USB_HWA_HCD is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB Device Class drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_USB_ACM is not set
|
|
|
|
|
# CONFIG_USB_PRINTER is not set
|
|
|
|
|
# CONFIG_USB_WDM is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_USB_TMC is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# also be needed; see USB_STORAGE Help for more info
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
#
|
|
|
|
|
CONFIG_USB_STORAGE=y
|
|
|
|
|
# CONFIG_USB_STORAGE_DEBUG is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_FREECOM is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_ISD200 is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_USBAT is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_ONETOUCH is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_KARMA is not set
|
|
|
|
|
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
|
|
|
|
|
# CONFIG_USB_LIBUSUAL is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB Imaging devices
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_USB_MDC800 is not set
|
|
|
|
|
# CONFIG_USB_MICROTEK is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB port drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_USB_SERIAL is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# USB Miscellaneous drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_USB_EMI62 is not set
|
|
|
|
|
# CONFIG_USB_EMI26 is not set
|
|
|
|
|
# CONFIG_USB_ADUTUX is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_USB_SEVSEG is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_USB_RIO500 is not set
|
|
|
|
|
# CONFIG_USB_LEGOTOWER is not set
|
|
|
|
|
# CONFIG_USB_LCD is not set
|
|
|
|
|
# CONFIG_USB_BERRY_CHARGE is not set
|
|
|
|
|
# CONFIG_USB_LED is not set
|
|
|
|
|
# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
|
|
|
# CONFIG_USB_CYTHERM is not set
|
|
|
|
|
# CONFIG_USB_IDMOUSE is not set
|
|
|
|
|
# CONFIG_USB_FTDI_ELAN is not set
|
|
|
|
|
# CONFIG_USB_APPLEDISPLAY is not set
|
|
|
|
|
# CONFIG_USB_SISUSBVGA is not set
|
|
|
|
|
# CONFIG_USB_LD is not set
|
|
|
|
|
# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
|
|
|
# CONFIG_USB_IOWARRIOR is not set
|
|
|
|
|
# CONFIG_USB_TEST is not set
|
|
|
|
|
# CONFIG_USB_ISIGHTFW is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_USB_VST is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_USB_GADGET is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# OTG and related infrastructure
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_NOP_USB_XCEIV is not set
|
|
|
|
|
# CONFIG_UWB is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_MMC is not set
|
|
|
|
|
# CONFIG_MEMSTICK is not set
|
|
|
|
|
# CONFIG_NEW_LEDS is not set
|
|
|
|
|
# CONFIG_ACCESSIBILITY is not set
|
|
|
|
|
# CONFIG_INFINIBAND is not set
|
|
|
|
|
# CONFIG_EDAC is not set
|
|
|
|
|
CONFIG_RTC_LIB=y
|
|
|
|
|
CONFIG_RTC_CLASS=y
|
|
|
|
|
CONFIG_RTC_HCTOSYS=y
|
|
|
|
|
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
|
|
|
# CONFIG_RTC_DEBUG is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# RTC interfaces
|
|
|
|
|
#
|
|
|
|
|
CONFIG_RTC_INTF_SYSFS=y
|
|
|
|
|
CONFIG_RTC_INTF_PROC=y
|
|
|
|
|
CONFIG_RTC_INTF_DEV=y
|
|
|
|
|
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
|
|
|
# CONFIG_RTC_DRV_TEST is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# I2C RTC drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_RTC_DRV_DS1307 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1374 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1672 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_MAX6900 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_RS5C372 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_ISL1208 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_X1205 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_PCF8563 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_PCF8583 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_M41T80 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_S35390A is not set
|
|
|
|
|
# CONFIG_RTC_DRV_FM3130 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_RTC_DRV_RX8581 is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_RTC_DRV_RX8025 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# SPI RTC drivers
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_RTC_DRV_M41T94 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1305 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1390 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_R9701 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_RS5C348 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_RTC_DRV_DS3234 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Platform RTC drivers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_RTC_DRV_CMOS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_RTC_DRV_DS1286 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_RTC_DRV_DS1511 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1553 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_DS1742 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
|
|
|
# CONFIG_RTC_DRV_M48T86 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_RTC_DRV_M48T35 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_RTC_DRV_M48T59 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_RTC_DRV_BQ4802 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# on-CPU RTC drivers
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_RTC_DRV_GENERIC is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_DMADEVICES is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_AUXDISPLAY is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_UIO is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# TI VLYNQ
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_STAGING is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# File systems
|
|
|
|
|
#
|
|
|
|
|
CONFIG_EXT2_FS=y
|
|
|
|
|
# CONFIG_EXT2_FS_XATTR is not set
|
|
|
|
|
# CONFIG_EXT2_FS_XIP is not set
|
|
|
|
|
CONFIG_EXT3_FS=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_EXT3_FS_XATTR=y
|
|
|
|
|
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
|
|
|
|
# CONFIG_EXT3_FS_SECURITY is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_EXT4_FS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_JBD=y
|
|
|
|
|
CONFIG_FS_MBCACHE=y
|
|
|
|
|
# CONFIG_REISERFS_FS is not set
|
|
|
|
|
# CONFIG_JFS_FS is not set
|
|
|
|
|
# CONFIG_FS_POSIX_ACL is not set
|
|
|
|
|
# CONFIG_XFS_FS is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_GFS2_FS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_OCFS2_FS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_BTRFS_FS is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_FILE_LOCKING=y
|
|
|
|
|
CONFIG_FSNOTIFY=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_DNOTIFY=y
|
|
|
|
|
CONFIG_INOTIFY=y
|
|
|
|
|
CONFIG_INOTIFY_USER=y
|
|
|
|
|
# CONFIG_QUOTA is not set
|
|
|
|
|
# CONFIG_AUTOFS_FS is not set
|
|
|
|
|
# CONFIG_AUTOFS4_FS is not set
|
|
|
|
|
# CONFIG_FUSE_FS is not set
|
|
|
|
|
|
2009-05-13 18:24:50 -04:00
|
|
|
#
|
|
|
|
|
# Caches
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_FSCACHE is not set
|
|
|
|
|
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
#
|
|
|
|
|
# CD-ROM/DVD Filesystems
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_ISO9660_FS is not set
|
|
|
|
|
# CONFIG_UDF_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# DOS/FAT/NT Filesystems
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_MSDOS_FS is not set
|
|
|
|
|
# CONFIG_VFAT_FS is not set
|
|
|
|
|
# CONFIG_NTFS_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Pseudo filesystems
|
|
|
|
|
#
|
|
|
|
|
CONFIG_PROC_FS=y
|
|
|
|
|
CONFIG_PROC_KCORE=y
|
|
|
|
|
CONFIG_PROC_SYSCTL=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_PROC_PAGE_MONITOR=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_SYSFS=y
|
|
|
|
|
CONFIG_TMPFS=y
|
|
|
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
|
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
|
|
|
# CONFIG_CONFIGFS_FS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_MISC_FILESYSTEMS=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_ADFS_FS is not set
|
|
|
|
|
# CONFIG_AFFS_FS is not set
|
|
|
|
|
# CONFIG_HFS_FS is not set
|
|
|
|
|
# CONFIG_HFSPLUS_FS is not set
|
|
|
|
|
# CONFIG_BEFS_FS is not set
|
|
|
|
|
# CONFIG_BFS_FS is not set
|
|
|
|
|
# CONFIG_EFS_FS is not set
|
|
|
|
|
CONFIG_JFFS2_FS=y
|
|
|
|
|
CONFIG_JFFS2_FS_DEBUG=0
|
|
|
|
|
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
|
|
|
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
|
|
|
|
# CONFIG_JFFS2_SUMMARY is not set
|
|
|
|
|
# CONFIG_JFFS2_FS_XATTR is not set
|
|
|
|
|
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
|
|
|
CONFIG_JFFS2_ZLIB=y
|
|
|
|
|
# CONFIG_JFFS2_LZO is not set
|
|
|
|
|
CONFIG_JFFS2_RTIME=y
|
|
|
|
|
# CONFIG_JFFS2_RUBIN is not set
|
|
|
|
|
CONFIG_CRAMFS=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SQUASHFS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_VXFS_FS is not set
|
|
|
|
|
# CONFIG_MINIX_FS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_OMFS_FS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_HPFS_FS is not set
|
|
|
|
|
# CONFIG_QNX4FS_FS is not set
|
|
|
|
|
# CONFIG_ROMFS_FS is not set
|
|
|
|
|
# CONFIG_SYSV_FS is not set
|
|
|
|
|
# CONFIG_UFS_FS is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_NILFS2_FS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_NETWORK_FILESYSTEMS=y
|
|
|
|
|
CONFIG_NFS_FS=y
|
|
|
|
|
CONFIG_NFS_V3=y
|
|
|
|
|
# CONFIG_NFS_V3_ACL is not set
|
|
|
|
|
# CONFIG_NFS_V4 is not set
|
|
|
|
|
CONFIG_ROOT_NFS=y
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_NFSD is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_LOCKD=y
|
|
|
|
|
CONFIG_LOCKD_V4=y
|
|
|
|
|
CONFIG_NFS_COMMON=y
|
|
|
|
|
CONFIG_SUNRPC=y
|
|
|
|
|
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
|
|
|
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
|
|
|
# CONFIG_SMB_FS is not set
|
|
|
|
|
# CONFIG_CIFS is not set
|
|
|
|
|
# CONFIG_NCP_FS is not set
|
|
|
|
|
# CONFIG_CODA_FS is not set
|
|
|
|
|
# CONFIG_AFS_FS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Partition Types
|
|
|
|
|
#
|
|
|
|
|
CONFIG_PARTITION_ADVANCED=y
|
|
|
|
|
# CONFIG_ACORN_PARTITION is not set
|
|
|
|
|
# CONFIG_OSF_PARTITION is not set
|
|
|
|
|
# CONFIG_AMIGA_PARTITION is not set
|
|
|
|
|
# CONFIG_ATARI_PARTITION is not set
|
|
|
|
|
# CONFIG_MAC_PARTITION is not set
|
|
|
|
|
CONFIG_MSDOS_PARTITION=y
|
|
|
|
|
# CONFIG_BSD_DISKLABEL is not set
|
|
|
|
|
# CONFIG_MINIX_SUBPARTITION is not set
|
|
|
|
|
# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
|
|
|
# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
|
|
|
# CONFIG_LDM_PARTITION is not set
|
|
|
|
|
# CONFIG_SGI_PARTITION is not set
|
|
|
|
|
# CONFIG_ULTRIX_PARTITION is not set
|
|
|
|
|
# CONFIG_SUN_PARTITION is not set
|
|
|
|
|
# CONFIG_KARMA_PARTITION is not set
|
|
|
|
|
# CONFIG_EFI_PARTITION is not set
|
|
|
|
|
# CONFIG_SYSV68_PARTITION is not set
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_NLS=y
|
|
|
|
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_437 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_737 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_775 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_850 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_852 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_855 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_857 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_860 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_861 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_862 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_863 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_864 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_865 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_866 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_869 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_936 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_950 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_932 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_949 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_874 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_8 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
|
|
|
# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
|
|
|
# CONFIG_NLS_ASCII is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_1 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_2 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_3 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_4 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_5 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_6 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_7 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_9 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_13 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_14 is not set
|
|
|
|
|
# CONFIG_NLS_ISO8859_15 is not set
|
|
|
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
|
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
|
|
|
# CONFIG_NLS_UTF8 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_DLM is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_BINARY_PRINTF is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Library routines
|
|
|
|
|
#
|
|
|
|
|
CONFIG_BITREVERSE=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_GENERIC_FIND_LAST_BIT=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CRC_CCITT is not set
|
|
|
|
|
# CONFIG_CRC16 is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_CRC_T10DIF is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CRC_ITU_T is not set
|
|
|
|
|
CONFIG_CRC32=y
|
|
|
|
|
# CONFIG_CRC7 is not set
|
|
|
|
|
# CONFIG_LIBCRC32C is not set
|
|
|
|
|
CONFIG_ZLIB_INFLATE=y
|
|
|
|
|
CONFIG_ZLIB_DEFLATE=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_DECOMPRESS_GZIP=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_HAS_IOMEM=y
|
|
|
|
|
CONFIG_HAS_IOPORT=y
|
|
|
|
|
CONFIG_HAS_DMA=y
|
|
|
|
|
CONFIG_HAVE_LMB=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_NLATTR=y
|
2009-07-30 00:34:01 -04:00
|
|
|
CONFIG_GENERIC_ATOMIC64=y
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Kernel hacking
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_PRINTK_TIME is not set
|
|
|
|
|
CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
|
|
|
CONFIG_ENABLE_MUST_CHECK=y
|
|
|
|
|
CONFIG_FRAME_WARN=1024
|
|
|
|
|
# CONFIG_MAGIC_SYSRQ is not set
|
|
|
|
|
# CONFIG_UNUSED_SYMBOLS is not set
|
|
|
|
|
# CONFIG_DEBUG_FS is not set
|
|
|
|
|
# CONFIG_HEADERS_CHECK is not set
|
|
|
|
|
# CONFIG_DEBUG_KERNEL is not set
|
|
|
|
|
# CONFIG_SLUB_DEBUG_ON is not set
|
|
|
|
|
# CONFIG_SLUB_STATS is not set
|
|
|
|
|
# CONFIG_DEBUG_BUGVERBOSE is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_DEBUG_MEMORY_INIT is not set
|
|
|
|
|
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
|
|
|
|
# CONFIG_LATENCYTOP is not set
|
|
|
|
|
CONFIG_SYSCTL_SYSCALL_CHECK=y
|
|
|
|
|
CONFIG_HAVE_FUNCTION_TRACER=y
|
|
|
|
|
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
|
|
|
|
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
|
|
|
|
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
|
|
|
|
CONFIG_TRACING_SUPPORT=y
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_FTRACE is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SAMPLES is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_HAVE_ARCH_KGDB=y
|
2009-07-30 00:34:01 -04:00
|
|
|
# CONFIG_PPC_DISABLE_WERROR is not set
|
|
|
|
|
CONFIG_PPC_WERROR=y
|
2009-05-13 18:24:50 -04:00
|
|
|
CONFIG_PRINT_STACK_DEPTH=64
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_IRQSTACKS is not set
|
|
|
|
|
# CONFIG_PPC_EARLY_DEBUG is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Security options
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_KEYS is not set
|
|
|
|
|
# CONFIG_SECURITY is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_SECURITYFS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
|
|
|
CONFIG_CRYPTO=y
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Crypto core or helper
|
|
|
|
|
#
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_CRYPTO_FIPS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CRYPTO_MANAGER is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_CRYPTO_MANAGER2 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CRYPTO_GF128MUL is not set
|
|
|
|
|
# CONFIG_CRYPTO_NULL is not set
|
|
|
|
|
# CONFIG_CRYPTO_CRYPTD is not set
|
|
|
|
|
# CONFIG_CRYPTO_AUTHENC is not set
|
|
|
|
|
# CONFIG_CRYPTO_TEST is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Authenticated Encryption with Associated Data
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CRYPTO_CCM is not set
|
|
|
|
|
# CONFIG_CRYPTO_GCM is not set
|
|
|
|
|
# CONFIG_CRYPTO_SEQIV is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Block modes
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CRYPTO_CBC is not set
|
|
|
|
|
# CONFIG_CRYPTO_CTR is not set
|
|
|
|
|
# CONFIG_CRYPTO_CTS is not set
|
|
|
|
|
# CONFIG_CRYPTO_ECB is not set
|
|
|
|
|
# CONFIG_CRYPTO_LRW is not set
|
|
|
|
|
# CONFIG_CRYPTO_PCBC is not set
|
|
|
|
|
# CONFIG_CRYPTO_XTS is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Hash modes
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CRYPTO_HMAC is not set
|
|
|
|
|
# CONFIG_CRYPTO_XCBC is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Digest
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CRYPTO_CRC32C is not set
|
|
|
|
|
# CONFIG_CRYPTO_MD4 is not set
|
|
|
|
|
# CONFIG_CRYPTO_MD5 is not set
|
|
|
|
|
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_CRYPTO_RMD128 is not set
|
|
|
|
|
# CONFIG_CRYPTO_RMD160 is not set
|
|
|
|
|
# CONFIG_CRYPTO_RMD256 is not set
|
|
|
|
|
# CONFIG_CRYPTO_RMD320 is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CRYPTO_SHA1 is not set
|
|
|
|
|
# CONFIG_CRYPTO_SHA256 is not set
|
|
|
|
|
# CONFIG_CRYPTO_SHA512 is not set
|
|
|
|
|
# CONFIG_CRYPTO_TGR192 is not set
|
|
|
|
|
# CONFIG_CRYPTO_WP512 is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Ciphers
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CRYPTO_AES is not set
|
|
|
|
|
# CONFIG_CRYPTO_ANUBIS is not set
|
|
|
|
|
# CONFIG_CRYPTO_ARC4 is not set
|
|
|
|
|
# CONFIG_CRYPTO_BLOWFISH is not set
|
|
|
|
|
# CONFIG_CRYPTO_CAMELLIA is not set
|
|
|
|
|
# CONFIG_CRYPTO_CAST5 is not set
|
|
|
|
|
# CONFIG_CRYPTO_CAST6 is not set
|
|
|
|
|
# CONFIG_CRYPTO_DES is not set
|
|
|
|
|
# CONFIG_CRYPTO_FCRYPT is not set
|
|
|
|
|
# CONFIG_CRYPTO_KHAZAD is not set
|
|
|
|
|
# CONFIG_CRYPTO_SALSA20 is not set
|
|
|
|
|
# CONFIG_CRYPTO_SEED is not set
|
|
|
|
|
# CONFIG_CRYPTO_SERPENT is not set
|
|
|
|
|
# CONFIG_CRYPTO_TEA is not set
|
|
|
|
|
# CONFIG_CRYPTO_TWOFISH is not set
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Compression
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CRYPTO_DEFLATE is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_CRYPTO_ZLIB is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_CRYPTO_LZO is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Random Number Generation
|
|
|
|
|
#
|
|
|
|
|
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
CONFIG_CRYPTO_HW=y
|
|
|
|
|
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
|
2009-05-13 18:24:50 -04:00
|
|
|
# CONFIG_CRYPTO_DEV_TALITOS is not set
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 09:58:43 -04:00
|
|
|
# CONFIG_PPC_CLOCK is not set
|
|
|
|
|
# CONFIG_VIRTUALIZATION is not set
|
