2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
|
|
|
|
bttv - Bt848 frame grabber driver
|
|
|
|
|
|
|
|
Copyright (C) 1996,97,98 Ralph Metzler <rjkm@thp.uni-koeln.de>
|
2005-11-09 00:37:43 -05:00
|
|
|
& Marcus Metzler <mocm@thp.uni-koeln.de>
|
2005-04-16 18:20:36 -04:00
|
|
|
(c) 1999-2002 Gerd Knorr <kraxel@bytesex.org>
|
|
|
|
|
|
|
|
some v4l2 code lines are taken from Justin's bttv2 driver which is
|
|
|
|
(c) 2000 Justin Schoeman <justin@suntiger.ee.up.ac.za>
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
Cropping and overscan support
|
|
|
|
Copyright (C) 2005, 2006 Michael H. Schimek <mschimek@gmx.at>
|
|
|
|
Sponsored by OPQ Systems AB
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program; if not, write to the Free Software
|
|
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/moduleparam.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/fs.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/kdev_t.h>
|
2006-01-09 12:25:20 -05:00
|
|
|
#include "bttvp.h"
|
2006-01-09 12:32:31 -05:00
|
|
|
#include <media/v4l2-common.h>
|
2006-03-18 19:31:00 -05:00
|
|
|
#include <media/tvaudio.h>
|
2006-03-19 10:35:57 -05:00
|
|
|
#include <media/msp3400.h>
|
2006-01-09 12:25:20 -05:00
|
|
|
|
2005-07-12 16:58:42 -04:00
|
|
|
#include <linux/dma-mapping.h>
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
|
|
|
2006-03-23 19:45:24 -05:00
|
|
|
#include <media/rds.h>
|
2005-09-09 16:03:39 -04:00
|
|
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int bttv_num; /* number of Bt848s in use */
|
|
|
|
struct bttv bttvs[BTTV_MAX];
|
|
|
|
|
2006-01-13 11:10:19 -05:00
|
|
|
unsigned int bttv_debug;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int bttv_verbose = 1;
|
2006-01-13 11:10:19 -05:00
|
|
|
unsigned int bttv_gpio;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* config variables */
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
|
|
static unsigned int bigendian=1;
|
|
|
|
#else
|
2006-01-13 11:10:19 -05:00
|
|
|
static unsigned int bigendian;
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
static unsigned int radio[BTTV_MAX];
|
2006-01-13 11:10:19 -05:00
|
|
|
static unsigned int irq_debug;
|
2005-04-16 18:20:36 -04:00
|
|
|
static unsigned int gbuffers = 8;
|
|
|
|
static unsigned int gbufsize = 0x208000;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
static unsigned int reset_crop = 1;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
static int video_nr = -1;
|
|
|
|
static int radio_nr = -1;
|
|
|
|
static int vbi_nr = -1;
|
2006-01-13 11:10:19 -05:00
|
|
|
static int debug_latency;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2006-01-13 11:10:19 -05:00
|
|
|
static unsigned int fdsr;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* options */
|
2006-01-13 11:10:19 -05:00
|
|
|
static unsigned int combfilter;
|
|
|
|
static unsigned int lumafilter;
|
2005-04-16 18:20:36 -04:00
|
|
|
static unsigned int automute = 1;
|
2006-01-13 11:10:19 -05:00
|
|
|
static unsigned int chroma_agc;
|
2005-04-16 18:20:36 -04:00
|
|
|
static unsigned int adc_crush = 1;
|
|
|
|
static unsigned int whitecrush_upper = 0xCF;
|
|
|
|
static unsigned int whitecrush_lower = 0x7F;
|
2006-01-13 11:10:19 -05:00
|
|
|
static unsigned int vcr_hack;
|
|
|
|
static unsigned int irq_iswitch;
|
2005-06-28 23:45:25 -04:00
|
|
|
static unsigned int uv_ratio = 50;
|
2006-01-13 11:10:19 -05:00
|
|
|
static unsigned int full_luma_range;
|
|
|
|
static unsigned int coring;
|
2005-08-04 15:53:30 -04:00
|
|
|
extern int no_overlay;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* API features (turn on/off stuff for testing) */
|
|
|
|
static unsigned int v4l2 = 1;
|
|
|
|
|
|
|
|
/* insmod args */
|
|
|
|
module_param(bttv_verbose, int, 0644);
|
|
|
|
module_param(bttv_gpio, int, 0644);
|
|
|
|
module_param(bttv_debug, int, 0644);
|
|
|
|
module_param(irq_debug, int, 0644);
|
|
|
|
module_param(debug_latency, int, 0644);
|
|
|
|
|
|
|
|
module_param(fdsr, int, 0444);
|
|
|
|
module_param(video_nr, int, 0444);
|
|
|
|
module_param(radio_nr, int, 0444);
|
|
|
|
module_param(vbi_nr, int, 0444);
|
|
|
|
module_param(gbuffers, int, 0444);
|
|
|
|
module_param(gbufsize, int, 0444);
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
module_param(reset_crop, int, 0444);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
module_param(v4l2, int, 0644);
|
|
|
|
module_param(bigendian, int, 0644);
|
|
|
|
module_param(irq_iswitch, int, 0644);
|
|
|
|
module_param(combfilter, int, 0444);
|
|
|
|
module_param(lumafilter, int, 0444);
|
|
|
|
module_param(automute, int, 0444);
|
|
|
|
module_param(chroma_agc, int, 0444);
|
|
|
|
module_param(adc_crush, int, 0444);
|
|
|
|
module_param(whitecrush_upper, int, 0444);
|
|
|
|
module_param(whitecrush_lower, int, 0444);
|
|
|
|
module_param(vcr_hack, int, 0444);
|
2005-06-28 23:45:25 -04:00
|
|
|
module_param(uv_ratio, int, 0444);
|
|
|
|
module_param(full_luma_range, int, 0444);
|
|
|
|
module_param(coring, int, 0444);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
module_param_array(radio, int, NULL, 0444);
|
|
|
|
|
|
|
|
MODULE_PARM_DESC(radio,"The TV card supports radio, default is 0 (no)");
|
|
|
|
MODULE_PARM_DESC(bigendian,"byte order of the framebuffer, default is native endian");
|
|
|
|
MODULE_PARM_DESC(bttv_verbose,"verbose startup messages, default is 1 (yes)");
|
|
|
|
MODULE_PARM_DESC(bttv_gpio,"log gpio changes, default is 0 (no)");
|
|
|
|
MODULE_PARM_DESC(bttv_debug,"debug messages, default is 0 (no)");
|
|
|
|
MODULE_PARM_DESC(irq_debug,"irq handler debug messages, default is 0 (no)");
|
|
|
|
MODULE_PARM_DESC(gbuffers,"number of capture buffers. range 2-32, default 8");
|
|
|
|
MODULE_PARM_DESC(gbufsize,"size of the capture buffers, default is 0x208000");
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
MODULE_PARM_DESC(reset_crop,"reset cropping parameters at open(), default "
|
|
|
|
"is 1 (yes) for compatibility with older applications");
|
2005-04-16 18:20:36 -04:00
|
|
|
MODULE_PARM_DESC(automute,"mute audio on bad/missing video signal, default is 1 (yes)");
|
|
|
|
MODULE_PARM_DESC(chroma_agc,"enables the AGC of chroma signal, default is 0 (no)");
|
|
|
|
MODULE_PARM_DESC(adc_crush,"enables the luminance ADC crush, default is 1 (yes)");
|
|
|
|
MODULE_PARM_DESC(whitecrush_upper,"sets the white crush upper value, default is 207");
|
|
|
|
MODULE_PARM_DESC(whitecrush_lower,"sets the white crush lower value, default is 127");
|
|
|
|
MODULE_PARM_DESC(vcr_hack,"enables the VCR hack (improves synch on poor VCR tapes), default is 0 (no)");
|
|
|
|
MODULE_PARM_DESC(irq_iswitch,"switch inputs in irq handler");
|
2005-06-28 23:45:25 -04:00
|
|
|
MODULE_PARM_DESC(uv_ratio,"ratio between u and v gains, default is 50");
|
|
|
|
MODULE_PARM_DESC(full_luma_range,"use the full luma range, default is 0 (no)");
|
|
|
|
MODULE_PARM_DESC(coring,"set the luma coring level, default is 0 (no)");
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards");
|
|
|
|
MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* sysfs */
|
|
|
|
|
|
|
|
static ssize_t show_card(struct class_device *cd, char *buf)
|
|
|
|
{
|
|
|
|
struct video_device *vfd = to_video_device(cd);
|
|
|
|
struct bttv *btv = dev_get_drvdata(vfd->dev);
|
|
|
|
return sprintf(buf, "%d\n", btv ? btv->c.type : UNSET);
|
|
|
|
}
|
|
|
|
static CLASS_DEVICE_ATTR(card, S_IRUGO, show_card, NULL);
|
|
|
|
|
2007-03-24 14:23:50 -04:00
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* dvb auto-load setup */
|
|
|
|
#if defined(CONFIG_MODULES) && defined(MODULE)
|
|
|
|
static void request_module_async(struct work_struct *work)
|
|
|
|
{
|
|
|
|
request_module("dvb-bt8xx");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void request_modules(struct bttv *dev)
|
|
|
|
{
|
|
|
|
INIT_WORK(&dev->request_module_wk, request_module_async);
|
|
|
|
schedule_work(&dev->request_module_wk);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define request_modules(dev)
|
|
|
|
#endif /* CONFIG_MODULES */
|
|
|
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* static data */
|
|
|
|
|
|
|
|
/* special timing tables from conexant... */
|
|
|
|
static u8 SRAM_Table[][60] =
|
|
|
|
{
|
|
|
|
/* PAL digital input over GPIO[7:0] */
|
|
|
|
{
|
|
|
|
45, // 45 bytes following
|
|
|
|
0x36,0x11,0x01,0x00,0x90,0x02,0x05,0x10,0x04,0x16,
|
|
|
|
0x12,0x05,0x11,0x00,0x04,0x12,0xC0,0x00,0x31,0x00,
|
|
|
|
0x06,0x51,0x08,0x03,0x89,0x08,0x07,0xC0,0x44,0x00,
|
|
|
|
0x81,0x01,0x01,0xA9,0x0D,0x02,0x02,0x50,0x03,0x37,
|
|
|
|
0x37,0x00,0xAF,0x21,0x00
|
|
|
|
},
|
|
|
|
/* NTSC digital input over GPIO[7:0] */
|
|
|
|
{
|
|
|
|
51, // 51 bytes following
|
|
|
|
0x0C,0xC0,0x00,0x00,0x90,0x02,0x03,0x10,0x03,0x06,
|
|
|
|
0x10,0x04,0x12,0x12,0x05,0x02,0x13,0x04,0x19,0x00,
|
|
|
|
0x04,0x39,0x00,0x06,0x59,0x08,0x03,0x83,0x08,0x07,
|
|
|
|
0x03,0x50,0x00,0xC0,0x40,0x00,0x86,0x01,0x01,0xA6,
|
|
|
|
0x0D,0x02,0x03,0x11,0x01,0x05,0x37,0x00,0xAC,0x21,
|
|
|
|
0x00,
|
|
|
|
},
|
|
|
|
// TGB_NTSC392 // quartzsight
|
|
|
|
// This table has been modified to be used for Fusion Rev D
|
|
|
|
{
|
|
|
|
0x2A, // size of table = 42
|
|
|
|
0x06, 0x08, 0x04, 0x0a, 0xc0, 0x00, 0x18, 0x08, 0x03, 0x24,
|
|
|
|
0x08, 0x07, 0x02, 0x90, 0x02, 0x08, 0x10, 0x04, 0x0c, 0x10,
|
|
|
|
0x05, 0x2c, 0x11, 0x04, 0x55, 0x48, 0x00, 0x05, 0x50, 0x00,
|
|
|
|
0xbf, 0x0c, 0x02, 0x2f, 0x3d, 0x00, 0x2f, 0x3f, 0x00, 0xc3,
|
|
|
|
0x20, 0x00
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
/* minhdelayx1 first video pixel we can capture on a line and
|
|
|
|
hdelayx1 start of active video, both relative to rising edge of
|
|
|
|
/HRESET pulse (0H) in 1 / fCLKx1.
|
|
|
|
swidth width of active video and
|
|
|
|
totalwidth total line width, both in 1 / fCLKx1.
|
|
|
|
sqwidth total line width in square pixels.
|
|
|
|
vdelay start of active video in 2 * field lines relative to
|
|
|
|
trailing edge of /VRESET pulse (VDELAY register).
|
|
|
|
sheight height of active video in 2 * field lines.
|
|
|
|
videostart0 ITU-R frame line number of the line corresponding
|
|
|
|
to vdelay in the first field. */
|
|
|
|
#define CROPCAP(minhdelayx1, hdelayx1, swidth, totalwidth, sqwidth, \
|
|
|
|
vdelay, sheight, videostart0) \
|
|
|
|
.cropcap.bounds.left = minhdelayx1, \
|
|
|
|
/* * 2 because vertically we count field lines times two, */ \
|
|
|
|
/* e.g. 23 * 2 to 23 * 2 + 576 in PAL-BGHI defrect. */ \
|
|
|
|
.cropcap.bounds.top = (videostart0) * 2 - (vdelay) + MIN_VDELAY, \
|
|
|
|
/* 4 is a safety margin at the end of the line. */ \
|
|
|
|
.cropcap.bounds.width = (totalwidth) - (minhdelayx1) - 4, \
|
|
|
|
.cropcap.bounds.height = (sheight) + (vdelay) - MIN_VDELAY, \
|
|
|
|
.cropcap.defrect.left = hdelayx1, \
|
|
|
|
.cropcap.defrect.top = (videostart0) * 2, \
|
|
|
|
.cropcap.defrect.width = swidth, \
|
|
|
|
.cropcap.defrect.height = sheight, \
|
|
|
|
.cropcap.pixelaspect.numerator = totalwidth, \
|
|
|
|
.cropcap.pixelaspect.denominator = sqwidth,
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
const struct bttv_tvnorm bttv_tvnorms[] = {
|
|
|
|
/* PAL-BDGHI */
|
2005-11-09 00:37:43 -05:00
|
|
|
/* max. active video is actually 922, but 924 is divisible by 4 and 3! */
|
|
|
|
/* actually, max active PAL with HSCALE=0 is 948, NTSC is 768 - nil */
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
.v4l2_id = V4L2_STD_PAL,
|
|
|
|
.name = "PAL",
|
|
|
|
.Fsc = 35468950,
|
|
|
|
.swidth = 924,
|
|
|
|
.sheight = 576,
|
|
|
|
.totalwidth = 1135,
|
|
|
|
.adelay = 0x7f,
|
|
|
|
.bdelay = 0x72,
|
|
|
|
.iform = (BT848_IFORM_PAL_BDGHI|BT848_IFORM_XT1),
|
|
|
|
.scaledtwidth = 1135,
|
|
|
|
.hdelayx1 = 186,
|
|
|
|
.hactivex1 = 924,
|
|
|
|
.vdelay = 0x20,
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
.vbipack = 255, /* min (2048 / 4, 0x1ff) & 0xff */
|
2005-04-16 18:20:36 -04:00
|
|
|
.sram = 0,
|
2006-01-09 12:25:27 -05:00
|
|
|
/* ITU-R frame line number of the first VBI line
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
we can capture, of the first and second field.
|
|
|
|
The last line is determined by cropcap.bounds. */
|
|
|
|
.vbistart = { 7, 320 },
|
|
|
|
CROPCAP(/* minhdelayx1 */ 68,
|
|
|
|
/* hdelayx1 */ 186,
|
|
|
|
/* Should be (768 * 1135 + 944 / 2) / 944.
|
|
|
|
cropcap.defrect is used for image width
|
|
|
|
checks, so we keep the old value 924. */
|
|
|
|
/* swidth */ 924,
|
|
|
|
/* totalwidth */ 1135,
|
|
|
|
/* sqwidth */ 944,
|
|
|
|
/* vdelay */ 0x20,
|
|
|
|
/* sheight */ 576,
|
|
|
|
/* videostart0 */ 23)
|
|
|
|
/* bt878 (and bt848?) can capture another
|
|
|
|
line below active video. */
|
|
|
|
.cropcap.bounds.height = (576 + 2) + 0x20 - 2,
|
2005-04-16 18:20:36 -04:00
|
|
|
},{
|
2006-02-07 03:48:40 -05:00
|
|
|
.v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
|
2005-04-16 18:20:36 -04:00
|
|
|
.name = "NTSC",
|
|
|
|
.Fsc = 28636363,
|
|
|
|
.swidth = 768,
|
|
|
|
.sheight = 480,
|
|
|
|
.totalwidth = 910,
|
|
|
|
.adelay = 0x68,
|
|
|
|
.bdelay = 0x5d,
|
|
|
|
.iform = (BT848_IFORM_NTSC|BT848_IFORM_XT0),
|
|
|
|
.scaledtwidth = 910,
|
|
|
|
.hdelayx1 = 128,
|
|
|
|
.hactivex1 = 910,
|
|
|
|
.vdelay = 0x1a,
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
.vbipack = 144, /* min (1600 / 4, 0x1ff) & 0xff */
|
2005-04-16 18:20:36 -04:00
|
|
|
.sram = 1,
|
2006-01-09 12:25:27 -05:00
|
|
|
.vbistart = { 10, 273 },
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
CROPCAP(/* minhdelayx1 */ 68,
|
|
|
|
/* hdelayx1 */ 128,
|
|
|
|
/* Should be (640 * 910 + 780 / 2) / 780? */
|
|
|
|
/* swidth */ 768,
|
|
|
|
/* totalwidth */ 910,
|
|
|
|
/* sqwidth */ 780,
|
|
|
|
/* vdelay */ 0x1a,
|
|
|
|
/* sheight */ 480,
|
|
|
|
/* videostart0 */ 23)
|
2005-04-16 18:20:36 -04:00
|
|
|
},{
|
|
|
|
.v4l2_id = V4L2_STD_SECAM,
|
|
|
|
.name = "SECAM",
|
|
|
|
.Fsc = 35468950,
|
|
|
|
.swidth = 924,
|
|
|
|
.sheight = 576,
|
|
|
|
.totalwidth = 1135,
|
|
|
|
.adelay = 0x7f,
|
|
|
|
.bdelay = 0xb0,
|
|
|
|
.iform = (BT848_IFORM_SECAM|BT848_IFORM_XT1),
|
|
|
|
.scaledtwidth = 1135,
|
|
|
|
.hdelayx1 = 186,
|
|
|
|
.hactivex1 = 922,
|
|
|
|
.vdelay = 0x20,
|
|
|
|
.vbipack = 255,
|
|
|
|
.sram = 0, /* like PAL, correct? */
|
2006-01-09 12:25:27 -05:00
|
|
|
.vbistart = { 7, 320 },
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
CROPCAP(/* minhdelayx1 */ 68,
|
|
|
|
/* hdelayx1 */ 186,
|
|
|
|
/* swidth */ 924,
|
|
|
|
/* totalwidth */ 1135,
|
|
|
|
/* sqwidth */ 944,
|
|
|
|
/* vdelay */ 0x20,
|
|
|
|
/* sheight */ 576,
|
|
|
|
/* videostart0 */ 23)
|
2005-04-16 18:20:36 -04:00
|
|
|
},{
|
|
|
|
.v4l2_id = V4L2_STD_PAL_Nc,
|
|
|
|
.name = "PAL-Nc",
|
|
|
|
.Fsc = 28636363,
|
|
|
|
.swidth = 640,
|
|
|
|
.sheight = 576,
|
|
|
|
.totalwidth = 910,
|
|
|
|
.adelay = 0x68,
|
|
|
|
.bdelay = 0x5d,
|
|
|
|
.iform = (BT848_IFORM_PAL_NC|BT848_IFORM_XT0),
|
|
|
|
.scaledtwidth = 780,
|
|
|
|
.hdelayx1 = 130,
|
|
|
|
.hactivex1 = 734,
|
|
|
|
.vdelay = 0x1a,
|
|
|
|
.vbipack = 144,
|
|
|
|
.sram = -1,
|
2006-01-09 12:25:27 -05:00
|
|
|
.vbistart = { 7, 320 },
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
CROPCAP(/* minhdelayx1 */ 68,
|
|
|
|
/* hdelayx1 */ 130,
|
|
|
|
/* swidth */ (640 * 910 + 780 / 2) / 780,
|
|
|
|
/* totalwidth */ 910,
|
|
|
|
/* sqwidth */ 780,
|
|
|
|
/* vdelay */ 0x1a,
|
|
|
|
/* sheight */ 576,
|
|
|
|
/* videostart0 */ 23)
|
2005-04-16 18:20:36 -04:00
|
|
|
},{
|
|
|
|
.v4l2_id = V4L2_STD_PAL_M,
|
|
|
|
.name = "PAL-M",
|
|
|
|
.Fsc = 28636363,
|
|
|
|
.swidth = 640,
|
|
|
|
.sheight = 480,
|
|
|
|
.totalwidth = 910,
|
|
|
|
.adelay = 0x68,
|
|
|
|
.bdelay = 0x5d,
|
|
|
|
.iform = (BT848_IFORM_PAL_M|BT848_IFORM_XT0),
|
|
|
|
.scaledtwidth = 780,
|
|
|
|
.hdelayx1 = 135,
|
|
|
|
.hactivex1 = 754,
|
|
|
|
.vdelay = 0x1a,
|
|
|
|
.vbipack = 144,
|
|
|
|
.sram = -1,
|
2006-01-09 12:25:27 -05:00
|
|
|
.vbistart = { 10, 273 },
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
CROPCAP(/* minhdelayx1 */ 68,
|
|
|
|
/* hdelayx1 */ 135,
|
|
|
|
/* swidth */ (640 * 910 + 780 / 2) / 780,
|
|
|
|
/* totalwidth */ 910,
|
|
|
|
/* sqwidth */ 780,
|
|
|
|
/* vdelay */ 0x1a,
|
|
|
|
/* sheight */ 480,
|
|
|
|
/* videostart0 */ 23)
|
2005-04-16 18:20:36 -04:00
|
|
|
},{
|
|
|
|
.v4l2_id = V4L2_STD_PAL_N,
|
|
|
|
.name = "PAL-N",
|
|
|
|
.Fsc = 35468950,
|
|
|
|
.swidth = 768,
|
|
|
|
.sheight = 576,
|
|
|
|
.totalwidth = 1135,
|
|
|
|
.adelay = 0x7f,
|
|
|
|
.bdelay = 0x72,
|
|
|
|
.iform = (BT848_IFORM_PAL_N|BT848_IFORM_XT1),
|
|
|
|
.scaledtwidth = 944,
|
|
|
|
.hdelayx1 = 186,
|
|
|
|
.hactivex1 = 922,
|
|
|
|
.vdelay = 0x20,
|
|
|
|
.vbipack = 144,
|
|
|
|
.sram = -1,
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
.vbistart = { 7, 320 },
|
|
|
|
CROPCAP(/* minhdelayx1 */ 68,
|
|
|
|
/* hdelayx1 */ 186,
|
|
|
|
/* swidth */ (768 * 1135 + 944 / 2) / 944,
|
|
|
|
/* totalwidth */ 1135,
|
|
|
|
/* sqwidth */ 944,
|
|
|
|
/* vdelay */ 0x20,
|
|
|
|
/* sheight */ 576,
|
|
|
|
/* videostart0 */ 23)
|
2005-04-16 18:20:36 -04:00
|
|
|
},{
|
|
|
|
.v4l2_id = V4L2_STD_NTSC_M_JP,
|
|
|
|
.name = "NTSC-JP",
|
|
|
|
.Fsc = 28636363,
|
|
|
|
.swidth = 640,
|
|
|
|
.sheight = 480,
|
|
|
|
.totalwidth = 910,
|
|
|
|
.adelay = 0x68,
|
|
|
|
.bdelay = 0x5d,
|
|
|
|
.iform = (BT848_IFORM_NTSC_J|BT848_IFORM_XT0),
|
|
|
|
.scaledtwidth = 780,
|
|
|
|
.hdelayx1 = 135,
|
|
|
|
.hactivex1 = 754,
|
|
|
|
.vdelay = 0x16,
|
|
|
|
.vbipack = 144,
|
|
|
|
.sram = -1,
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
.vbistart = { 10, 273 },
|
|
|
|
CROPCAP(/* minhdelayx1 */ 68,
|
|
|
|
/* hdelayx1 */ 135,
|
|
|
|
/* swidth */ (640 * 910 + 780 / 2) / 780,
|
|
|
|
/* totalwidth */ 910,
|
|
|
|
/* sqwidth */ 780,
|
|
|
|
/* vdelay */ 0x16,
|
|
|
|
/* sheight */ 480,
|
|
|
|
/* videostart0 */ 23)
|
2005-04-16 18:20:36 -04:00
|
|
|
},{
|
|
|
|
/* that one hopefully works with the strange timing
|
|
|
|
* which video recorders produce when playing a NTSC
|
|
|
|
* tape on a PAL TV ... */
|
|
|
|
.v4l2_id = V4L2_STD_PAL_60,
|
|
|
|
.name = "PAL-60",
|
|
|
|
.Fsc = 35468950,
|
|
|
|
.swidth = 924,
|
|
|
|
.sheight = 480,
|
|
|
|
.totalwidth = 1135,
|
|
|
|
.adelay = 0x7f,
|
|
|
|
.bdelay = 0x72,
|
|
|
|
.iform = (BT848_IFORM_PAL_BDGHI|BT848_IFORM_XT1),
|
|
|
|
.scaledtwidth = 1135,
|
|
|
|
.hdelayx1 = 186,
|
|
|
|
.hactivex1 = 924,
|
|
|
|
.vdelay = 0x1a,
|
|
|
|
.vbipack = 255,
|
|
|
|
.vtotal = 524,
|
|
|
|
.sram = -1,
|
2006-01-09 12:25:27 -05:00
|
|
|
.vbistart = { 10, 273 },
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
CROPCAP(/* minhdelayx1 */ 68,
|
|
|
|
/* hdelayx1 */ 186,
|
|
|
|
/* swidth */ 924,
|
|
|
|
/* totalwidth */ 1135,
|
|
|
|
/* sqwidth */ 944,
|
|
|
|
/* vdelay */ 0x1a,
|
|
|
|
/* sheight */ 480,
|
|
|
|
/* videostart0 */ 23)
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
};
|
|
|
|
static const unsigned int BTTV_TVNORMS = ARRAY_SIZE(bttv_tvnorms);
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* bttv format list
|
|
|
|
packed pixel formats must come first */
|
|
|
|
static const struct bttv_format bttv_formats[] = {
|
|
|
|
{
|
|
|
|
.name = "8 bpp, gray",
|
|
|
|
.palette = VIDEO_PALETTE_GREY,
|
|
|
|
.fourcc = V4L2_PIX_FMT_GREY,
|
|
|
|
.btformat = BT848_COLOR_FMT_Y8,
|
|
|
|
.depth = 8,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "8 bpp, dithered color",
|
|
|
|
.palette = VIDEO_PALETTE_HI240,
|
|
|
|
.fourcc = V4L2_PIX_FMT_HI240,
|
|
|
|
.btformat = BT848_COLOR_FMT_RGB8,
|
|
|
|
.depth = 8,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED | FORMAT_FLAGS_DITHER,
|
|
|
|
},{
|
|
|
|
.name = "15 bpp RGB, le",
|
|
|
|
.palette = VIDEO_PALETTE_RGB555,
|
|
|
|
.fourcc = V4L2_PIX_FMT_RGB555,
|
|
|
|
.btformat = BT848_COLOR_FMT_RGB15,
|
|
|
|
.depth = 16,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "15 bpp RGB, be",
|
|
|
|
.palette = -1,
|
|
|
|
.fourcc = V4L2_PIX_FMT_RGB555X,
|
|
|
|
.btformat = BT848_COLOR_FMT_RGB15,
|
|
|
|
.btswap = 0x03, /* byteswap */
|
|
|
|
.depth = 16,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "16 bpp RGB, le",
|
|
|
|
.palette = VIDEO_PALETTE_RGB565,
|
|
|
|
.fourcc = V4L2_PIX_FMT_RGB565,
|
|
|
|
.btformat = BT848_COLOR_FMT_RGB16,
|
|
|
|
.depth = 16,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "16 bpp RGB, be",
|
|
|
|
.palette = -1,
|
|
|
|
.fourcc = V4L2_PIX_FMT_RGB565X,
|
|
|
|
.btformat = BT848_COLOR_FMT_RGB16,
|
|
|
|
.btswap = 0x03, /* byteswap */
|
|
|
|
.depth = 16,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "24 bpp RGB, le",
|
|
|
|
.palette = VIDEO_PALETTE_RGB24,
|
|
|
|
.fourcc = V4L2_PIX_FMT_BGR24,
|
|
|
|
.btformat = BT848_COLOR_FMT_RGB24,
|
|
|
|
.depth = 24,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "32 bpp RGB, le",
|
|
|
|
.palette = VIDEO_PALETTE_RGB32,
|
|
|
|
.fourcc = V4L2_PIX_FMT_BGR32,
|
|
|
|
.btformat = BT848_COLOR_FMT_RGB32,
|
|
|
|
.depth = 32,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "32 bpp RGB, be",
|
|
|
|
.palette = -1,
|
|
|
|
.fourcc = V4L2_PIX_FMT_RGB32,
|
|
|
|
.btformat = BT848_COLOR_FMT_RGB32,
|
|
|
|
.btswap = 0x0f, /* byte+word swap */
|
|
|
|
.depth = 32,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "4:2:2, packed, YUYV",
|
|
|
|
.palette = VIDEO_PALETTE_YUV422,
|
|
|
|
.fourcc = V4L2_PIX_FMT_YUYV,
|
|
|
|
.btformat = BT848_COLOR_FMT_YUY2,
|
|
|
|
.depth = 16,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "4:2:2, packed, YUYV",
|
|
|
|
.palette = VIDEO_PALETTE_YUYV,
|
|
|
|
.fourcc = V4L2_PIX_FMT_YUYV,
|
|
|
|
.btformat = BT848_COLOR_FMT_YUY2,
|
|
|
|
.depth = 16,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "4:2:2, packed, UYVY",
|
|
|
|
.palette = VIDEO_PALETTE_UYVY,
|
|
|
|
.fourcc = V4L2_PIX_FMT_UYVY,
|
|
|
|
.btformat = BT848_COLOR_FMT_YUY2,
|
|
|
|
.btswap = 0x03, /* byteswap */
|
|
|
|
.depth = 16,
|
|
|
|
.flags = FORMAT_FLAGS_PACKED,
|
|
|
|
},{
|
|
|
|
.name = "4:2:2, planar, Y-Cb-Cr",
|
|
|
|
.palette = VIDEO_PALETTE_YUV422P,
|
|
|
|
.fourcc = V4L2_PIX_FMT_YUV422P,
|
|
|
|
.btformat = BT848_COLOR_FMT_YCrCb422,
|
|
|
|
.depth = 16,
|
|
|
|
.flags = FORMAT_FLAGS_PLANAR,
|
|
|
|
.hshift = 1,
|
|
|
|
.vshift = 0,
|
|
|
|
},{
|
|
|
|
.name = "4:2:0, planar, Y-Cb-Cr",
|
|
|
|
.palette = VIDEO_PALETTE_YUV420P,
|
|
|
|
.fourcc = V4L2_PIX_FMT_YUV420,
|
|
|
|
.btformat = BT848_COLOR_FMT_YCrCb422,
|
|
|
|
.depth = 12,
|
|
|
|
.flags = FORMAT_FLAGS_PLANAR,
|
|
|
|
.hshift = 1,
|
|
|
|
.vshift = 1,
|
|
|
|
},{
|
|
|
|
.name = "4:2:0, planar, Y-Cr-Cb",
|
|
|
|
.palette = -1,
|
|
|
|
.fourcc = V4L2_PIX_FMT_YVU420,
|
|
|
|
.btformat = BT848_COLOR_FMT_YCrCb422,
|
|
|
|
.depth = 12,
|
|
|
|
.flags = FORMAT_FLAGS_PLANAR | FORMAT_FLAGS_CrCb,
|
|
|
|
.hshift = 1,
|
|
|
|
.vshift = 1,
|
|
|
|
},{
|
|
|
|
.name = "4:1:1, planar, Y-Cb-Cr",
|
|
|
|
.palette = VIDEO_PALETTE_YUV411P,
|
|
|
|
.fourcc = V4L2_PIX_FMT_YUV411P,
|
|
|
|
.btformat = BT848_COLOR_FMT_YCrCb411,
|
|
|
|
.depth = 12,
|
|
|
|
.flags = FORMAT_FLAGS_PLANAR,
|
|
|
|
.hshift = 2,
|
|
|
|
.vshift = 0,
|
|
|
|
},{
|
|
|
|
.name = "4:1:0, planar, Y-Cb-Cr",
|
|
|
|
.palette = VIDEO_PALETTE_YUV410P,
|
|
|
|
.fourcc = V4L2_PIX_FMT_YUV410,
|
|
|
|
.btformat = BT848_COLOR_FMT_YCrCb411,
|
|
|
|
.depth = 9,
|
|
|
|
.flags = FORMAT_FLAGS_PLANAR,
|
|
|
|
.hshift = 2,
|
|
|
|
.vshift = 2,
|
|
|
|
},{
|
|
|
|
.name = "4:1:0, planar, Y-Cr-Cb",
|
|
|
|
.palette = -1,
|
|
|
|
.fourcc = V4L2_PIX_FMT_YVU410,
|
|
|
|
.btformat = BT848_COLOR_FMT_YCrCb411,
|
|
|
|
.depth = 9,
|
|
|
|
.flags = FORMAT_FLAGS_PLANAR | FORMAT_FLAGS_CrCb,
|
|
|
|
.hshift = 2,
|
|
|
|
.vshift = 2,
|
|
|
|
},{
|
|
|
|
.name = "raw scanlines",
|
|
|
|
.palette = VIDEO_PALETTE_RAW,
|
|
|
|
.fourcc = -1,
|
|
|
|
.btformat = BT848_COLOR_FMT_RAW,
|
|
|
|
.depth = 8,
|
|
|
|
.flags = FORMAT_FLAGS_RAW,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
static const unsigned int BTTV_FORMATS = ARRAY_SIZE(bttv_formats);
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
|
|
|
|
#define V4L2_CID_PRIVATE_CHROMA_AGC (V4L2_CID_PRIVATE_BASE + 0)
|
|
|
|
#define V4L2_CID_PRIVATE_COMBFILTER (V4L2_CID_PRIVATE_BASE + 1)
|
|
|
|
#define V4L2_CID_PRIVATE_AUTOMUTE (V4L2_CID_PRIVATE_BASE + 2)
|
|
|
|
#define V4L2_CID_PRIVATE_LUMAFILTER (V4L2_CID_PRIVATE_BASE + 3)
|
|
|
|
#define V4L2_CID_PRIVATE_AGC_CRUSH (V4L2_CID_PRIVATE_BASE + 4)
|
|
|
|
#define V4L2_CID_PRIVATE_VCR_HACK (V4L2_CID_PRIVATE_BASE + 5)
|
|
|
|
#define V4L2_CID_PRIVATE_WHITECRUSH_UPPER (V4L2_CID_PRIVATE_BASE + 6)
|
|
|
|
#define V4L2_CID_PRIVATE_WHITECRUSH_LOWER (V4L2_CID_PRIVATE_BASE + 7)
|
2005-06-28 23:45:25 -04:00
|
|
|
#define V4L2_CID_PRIVATE_UV_RATIO (V4L2_CID_PRIVATE_BASE + 8)
|
|
|
|
#define V4L2_CID_PRIVATE_FULL_LUMA_RANGE (V4L2_CID_PRIVATE_BASE + 9)
|
|
|
|
#define V4L2_CID_PRIVATE_CORING (V4L2_CID_PRIVATE_BASE + 10)
|
|
|
|
#define V4L2_CID_PRIVATE_LASTP1 (V4L2_CID_PRIVATE_BASE + 11)
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
static const struct v4l2_queryctrl no_ctl = {
|
|
|
|
.name = "42",
|
|
|
|
.flags = V4L2_CTRL_FLAG_DISABLED,
|
|
|
|
};
|
|
|
|
static const struct v4l2_queryctrl bttv_ctls[] = {
|
|
|
|
/* --- video --- */
|
|
|
|
{
|
|
|
|
.id = V4L2_CID_BRIGHTNESS,
|
|
|
|
.name = "Brightness",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 65535,
|
|
|
|
.step = 256,
|
|
|
|
.default_value = 32768,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_CONTRAST,
|
|
|
|
.name = "Contrast",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 65535,
|
|
|
|
.step = 128,
|
|
|
|
.default_value = 32768,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_SATURATION,
|
|
|
|
.name = "Saturation",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 65535,
|
|
|
|
.step = 128,
|
|
|
|
.default_value = 32768,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_HUE,
|
|
|
|
.name = "Hue",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 65535,
|
|
|
|
.step = 256,
|
|
|
|
.default_value = 32768,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},
|
|
|
|
/* --- audio --- */
|
|
|
|
{
|
|
|
|
.id = V4L2_CID_AUDIO_MUTE,
|
|
|
|
.name = "Mute",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_AUDIO_VOLUME,
|
|
|
|
.name = "Volume",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 65535,
|
|
|
|
.step = 65535/100,
|
|
|
|
.default_value = 65535,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_AUDIO_BALANCE,
|
|
|
|
.name = "Balance",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 65535,
|
|
|
|
.step = 65535/100,
|
|
|
|
.default_value = 32768,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_AUDIO_BASS,
|
|
|
|
.name = "Bass",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 65535,
|
|
|
|
.step = 65535/100,
|
|
|
|
.default_value = 32768,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_AUDIO_TREBLE,
|
|
|
|
.name = "Treble",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 65535,
|
|
|
|
.step = 65535/100,
|
|
|
|
.default_value = 32768,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},
|
|
|
|
/* --- private --- */
|
|
|
|
{
|
|
|
|
.id = V4L2_CID_PRIVATE_CHROMA_AGC,
|
|
|
|
.name = "chroma agc",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_COMBFILTER,
|
|
|
|
.name = "combfilter",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_AUTOMUTE,
|
|
|
|
.name = "automute",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_LUMAFILTER,
|
|
|
|
.name = "luma decimation filter",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_AGC_CRUSH,
|
|
|
|
.name = "agc crush",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_VCR_HACK,
|
|
|
|
.name = "vcr hack",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_WHITECRUSH_UPPER,
|
|
|
|
.name = "whitecrush upper",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 255,
|
|
|
|
.step = 1,
|
|
|
|
.default_value = 0xCF,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_WHITECRUSH_LOWER,
|
|
|
|
.name = "whitecrush lower",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 255,
|
|
|
|
.step = 1,
|
|
|
|
.default_value = 0x7F,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
2005-06-28 23:45:25 -04:00
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_UV_RATIO,
|
|
|
|
.name = "uv ratio",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 100,
|
|
|
|
.step = 1,
|
|
|
|
.default_value = 50,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_FULL_LUMA_RANGE,
|
|
|
|
.name = "full luma range",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_PRIVATE_CORING,
|
|
|
|
.name = "coring",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 3,
|
|
|
|
.step = 1,
|
|
|
|
.default_value = 0,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-06-28 23:45:25 -04:00
|
|
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
|
|
|
static const int BTTV_CTLS = ARRAY_SIZE(bttv_ctls);
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* resource management */
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
/*
|
|
|
|
RESOURCE_ allocated by freed by
|
|
|
|
|
|
|
|
VIDEO_READ bttv_read 1) bttv_read 2)
|
|
|
|
|
|
|
|
VIDEO_STREAM VIDIOC_STREAMON VIDIOC_STREAMOFF
|
|
|
|
VIDIOC_QBUF 1) bttv_release
|
|
|
|
VIDIOCMCAPTURE 1)
|
|
|
|
|
|
|
|
OVERLAY VIDIOCCAPTURE on VIDIOCCAPTURE off
|
|
|
|
VIDIOC_OVERLAY on VIDIOC_OVERLAY off
|
|
|
|
3) bttv_release
|
|
|
|
|
|
|
|
VBI VIDIOC_STREAMON VIDIOC_STREAMOFF
|
|
|
|
VIDIOC_QBUF 1) bttv_release
|
|
|
|
bttv_read, bttv_poll 1) 4)
|
|
|
|
|
|
|
|
1) The resource must be allocated when we enter buffer prepare functions
|
|
|
|
and remain allocated while buffers are in the DMA queue.
|
|
|
|
2) This is a single frame read.
|
|
|
|
3) VIDIOC_S_FBUF and VIDIOC_S_FMT (OVERLAY) still work when
|
|
|
|
RESOURCE_OVERLAY is allocated.
|
|
|
|
4) This is a continuous read, implies VIDIOC_STREAMON.
|
|
|
|
|
|
|
|
Note this driver permits video input and standard changes regardless if
|
|
|
|
resources are allocated.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define VBI_RESOURCES (RESOURCE_VBI)
|
|
|
|
#define VIDEO_RESOURCES (RESOURCE_VIDEO_READ | \
|
|
|
|
RESOURCE_VIDEO_STREAM | \
|
|
|
|
RESOURCE_OVERLAY)
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
static
|
|
|
|
int check_alloc_btres(struct bttv *btv, struct bttv_fh *fh, int bit)
|
|
|
|
{
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
int xbits; /* mutual exclusive resources */
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (fh->resources & bit)
|
|
|
|
/* have it already allocated */
|
|
|
|
return 1;
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
xbits = bit;
|
|
|
|
if (bit & (RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM))
|
|
|
|
xbits |= RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* is it free? */
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
mutex_lock(&btv->lock);
|
|
|
|
if (btv->resources & xbits) {
|
2005-04-16 18:20:36 -04:00
|
|
|
/* no, someone else uses it */
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((bit & VIDEO_RESOURCES)
|
|
|
|
&& 0 == (btv->resources & VIDEO_RESOURCES)) {
|
|
|
|
/* Do crop - use current, don't - use default parameters. */
|
|
|
|
__s32 top = btv->crop[!!fh->do_crop].rect.top;
|
|
|
|
|
|
|
|
if (btv->vbi_end > top)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
/* We cannot capture the same line as video and VBI data.
|
|
|
|
Claim scan lines crop[].rect.top to bottom. */
|
|
|
|
btv->crop_start = top;
|
|
|
|
} else if (bit & VBI_RESOURCES) {
|
|
|
|
__s32 end = fh->vbi_fmt.end;
|
|
|
|
|
|
|
|
if (end > btv->crop_start)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
/* Claim scan lines above fh->vbi_fmt.end. */
|
|
|
|
btv->vbi_end = end;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* it's free, grab it */
|
|
|
|
fh->resources |= bit;
|
|
|
|
btv->resources |= bit;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 1;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
|
|
|
|
fail:
|
|
|
|
mutex_unlock(&btv->lock);
|
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static
|
|
|
|
int check_btres(struct bttv_fh *fh, int bit)
|
|
|
|
{
|
|
|
|
return (fh->resources & bit);
|
|
|
|
}
|
|
|
|
|
|
|
|
static
|
|
|
|
int locked_btres(struct bttv *btv, int bit)
|
|
|
|
{
|
|
|
|
return (btv->resources & bit);
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
/* Call with btv->lock down. */
|
|
|
|
static void
|
|
|
|
disclaim_vbi_lines(struct bttv *btv)
|
|
|
|
{
|
|
|
|
btv->vbi_end = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Call with btv->lock down. */
|
|
|
|
static void
|
|
|
|
disclaim_video_lines(struct bttv *btv)
|
|
|
|
{
|
|
|
|
const struct bttv_tvnorm *tvnorm;
|
|
|
|
u8 crop;
|
|
|
|
|
|
|
|
tvnorm = &bttv_tvnorms[btv->tvnorm];
|
|
|
|
btv->crop_start = tvnorm->cropcap.bounds.top
|
|
|
|
+ tvnorm->cropcap.bounds.height;
|
|
|
|
|
|
|
|
/* VBI capturing ends at VDELAY, start of video capturing, no
|
|
|
|
matter how many lines the VBI RISC program expects. When video
|
|
|
|
capturing is off, it shall no longer "preempt" VBI capturing,
|
|
|
|
so we set VDELAY to maximum. */
|
|
|
|
crop = btread(BT848_E_CROP) | 0xc0;
|
|
|
|
btwrite(crop, BT848_E_CROP);
|
|
|
|
btwrite(0xfe, BT848_E_VDELAY_LO);
|
|
|
|
btwrite(crop, BT848_O_CROP);
|
|
|
|
btwrite(0xfe, BT848_O_VDELAY_LO);
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
static
|
|
|
|
void free_btres(struct bttv *btv, struct bttv_fh *fh, int bits)
|
|
|
|
{
|
|
|
|
if ((fh->resources & bits) != bits) {
|
|
|
|
/* trying to free ressources not allocated by us ... */
|
|
|
|
printk("bttv: BUG! (btres)\n");
|
|
|
|
}
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
fh->resources &= ~bits;
|
|
|
|
btv->resources &= ~bits;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
|
|
|
|
bits = btv->resources;
|
|
|
|
|
|
|
|
if (0 == (bits & VIDEO_RESOURCES))
|
|
|
|
disclaim_video_lines(btv);
|
|
|
|
|
|
|
|
if (0 == (bits & VBI_RESOURCES))
|
|
|
|
disclaim_vbi_lines(btv);
|
|
|
|
|
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* If Bt848a or Bt849, use PLL for PAL/SECAM and crystal for NTSC */
|
|
|
|
|
|
|
|
/* Frequency = (F_input / PLL_X) * PLL_I.PLL_F/PLL_C
|
|
|
|
PLL_X = Reference pre-divider (0=1, 1=2)
|
|
|
|
PLL_C = Post divider (0=6, 1=4)
|
|
|
|
PLL_I = Integer input
|
|
|
|
PLL_F = Fractional input
|
|
|
|
|
|
|
|
F_input = 28.636363 MHz:
|
|
|
|
PAL (CLKx2 = 35.46895 MHz): PLL_X = 1, PLL_I = 0x0E, PLL_F = 0xDCF9, PLL_C = 0
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void set_pll_freq(struct bttv *btv, unsigned int fin, unsigned int fout)
|
|
|
|
{
|
2005-12-12 03:37:27 -05:00
|
|
|
unsigned char fl, fh, fi;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
/* prevent overflows */
|
|
|
|
fin/=4;
|
|
|
|
fout/=4;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
fout*=12;
|
|
|
|
fi=fout/fin;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
fout=(fout%fin)*256;
|
|
|
|
fh=fout/fin;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
fout=(fout%fin)*256;
|
|
|
|
fl=fout/fin;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
btwrite(fl, BT848_PLL_F_LO);
|
|
|
|
btwrite(fh, BT848_PLL_F_HI);
|
|
|
|
btwrite(fi|BT848_PLL_X, BT848_PLL_XCI);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static void set_pll(struct bttv *btv)
|
|
|
|
{
|
2005-12-12 03:37:27 -05:00
|
|
|
int i;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
if (!btv->pll.pll_crystal)
|
|
|
|
return;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
if (btv->pll.pll_ofreq == btv->pll.pll_current) {
|
|
|
|
dprintk("bttv%d: PLL: no change required\n",btv->c.nr);
|
2005-12-12 03:37:27 -05:00
|
|
|
return;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
if (btv->pll.pll_ifreq == btv->pll.pll_ofreq) {
|
|
|
|
/* no PLL needed */
|
|
|
|
if (btv->pll.pll_current == 0)
|
2005-12-12 03:37:28 -05:00
|
|
|
return;
|
2005-09-23 00:43:53 -04:00
|
|
|
bttv_printk(KERN_INFO "bttv%d: PLL can sleep, using XTAL (%d).\n",
|
2005-12-12 03:37:28 -05:00
|
|
|
btv->c.nr,btv->pll.pll_ifreq);
|
2005-12-12 03:37:27 -05:00
|
|
|
btwrite(0x00,BT848_TGCTRL);
|
|
|
|
btwrite(0x00,BT848_PLL_XCI);
|
|
|
|
btv->pll.pll_current = 0;
|
|
|
|
return;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-09-23 00:43:53 -04:00
|
|
|
bttv_printk(KERN_INFO "bttv%d: PLL: %d => %d ",btv->c.nr,
|
2005-12-12 03:37:28 -05:00
|
|
|
btv->pll.pll_ifreq, btv->pll.pll_ofreq);
|
2005-04-16 18:20:36 -04:00
|
|
|
set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq);
|
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
for (i=0; i<10; i++) {
|
2005-04-16 18:20:36 -04:00
|
|
|
/* Let other people run while the PLL stabilizes */
|
2005-09-23 00:43:53 -04:00
|
|
|
bttv_printk(".");
|
2005-04-16 18:20:36 -04:00
|
|
|
msleep(10);
|
|
|
|
|
2005-12-12 03:37:27 -05:00
|
|
|
if (btread(BT848_DSTATUS) & BT848_DSTATUS_PLOCK) {
|
2005-04-16 18:20:36 -04:00
|
|
|
btwrite(0,BT848_DSTATUS);
|
2005-12-12 03:37:27 -05:00
|
|
|
} else {
|
2005-12-12 03:37:28 -05:00
|
|
|
btwrite(0x08,BT848_TGCTRL);
|
|
|
|
btv->pll.pll_current = btv->pll.pll_ofreq;
|
2005-09-23 00:43:53 -04:00
|
|
|
bttv_printk(" ok\n");
|
2005-12-12 03:37:28 -05:00
|
|
|
return;
|
2005-12-12 03:37:27 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
btv->pll.pll_current = -1;
|
2005-09-23 00:43:53 -04:00
|
|
|
bttv_printk("failed\n");
|
2005-12-12 03:37:27 -05:00
|
|
|
return;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* used to switch between the bt848's analog/digital video capture modes */
|
|
|
|
static void bt848A_set_timing(struct bttv *btv)
|
|
|
|
{
|
|
|
|
int i, len;
|
|
|
|
int table_idx = bttv_tvnorms[btv->tvnorm].sram;
|
|
|
|
int fsc = bttv_tvnorms[btv->tvnorm].Fsc;
|
|
|
|
|
|
|
|
if (UNSET == bttv_tvcards[btv->c.type].muxsel[btv->input]) {
|
|
|
|
dprintk("bttv%d: load digital timing table (table_idx=%d)\n",
|
|
|
|
btv->c.nr,table_idx);
|
|
|
|
|
|
|
|
/* timing change...reset timing generator address */
|
2005-11-09 00:37:43 -05:00
|
|
|
btwrite(0x00, BT848_TGCTRL);
|
|
|
|
btwrite(0x02, BT848_TGCTRL);
|
|
|
|
btwrite(0x00, BT848_TGCTRL);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
len=SRAM_Table[table_idx][0];
|
|
|
|
for(i = 1; i <= len; i++)
|
|
|
|
btwrite(SRAM_Table[table_idx][i],BT848_TGLB);
|
|
|
|
btv->pll.pll_ofreq = 27000000;
|
|
|
|
|
|
|
|
set_pll(btv);
|
|
|
|
btwrite(0x11, BT848_TGCTRL);
|
|
|
|
btwrite(0x41, BT848_DVSIF);
|
|
|
|
} else {
|
|
|
|
btv->pll.pll_ofreq = fsc;
|
|
|
|
set_pll(btv);
|
|
|
|
btwrite(0x0, BT848_DVSIF);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
|
|
|
|
static void bt848_bright(struct bttv *btv, int bright)
|
|
|
|
{
|
|
|
|
int value;
|
|
|
|
|
|
|
|
// printk("bttv: set bright: %d\n",bright); // DEBUG
|
|
|
|
btv->bright = bright;
|
|
|
|
|
|
|
|
/* We want -128 to 127 we get 0-65535 */
|
|
|
|
value = (bright >> 8) - 128;
|
|
|
|
btwrite(value & 0xff, BT848_BRIGHT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bt848_hue(struct bttv *btv, int hue)
|
|
|
|
{
|
|
|
|
int value;
|
|
|
|
|
|
|
|
btv->hue = hue;
|
|
|
|
|
|
|
|
/* -128 to 127 */
|
|
|
|
value = (hue >> 8) - 128;
|
2005-11-09 00:37:43 -05:00
|
|
|
btwrite(value & 0xff, BT848_HUE);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static void bt848_contrast(struct bttv *btv, int cont)
|
|
|
|
{
|
|
|
|
int value,hibit;
|
|
|
|
|
|
|
|
btv->contrast = cont;
|
|
|
|
|
|
|
|
/* 0-511 */
|
|
|
|
value = (cont >> 7);
|
|
|
|
hibit = (value >> 6) & 4;
|
2005-11-09 00:37:43 -05:00
|
|
|
btwrite(value & 0xff, BT848_CONTRAST_LO);
|
|
|
|
btaor(hibit, ~4, BT848_E_CONTROL);
|
|
|
|
btaor(hibit, ~4, BT848_O_CONTROL);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static void bt848_sat(struct bttv *btv, int color)
|
|
|
|
{
|
|
|
|
int val_u,val_v,hibits;
|
|
|
|
|
|
|
|
btv->saturation = color;
|
|
|
|
|
|
|
|
/* 0-511 for the color */
|
2005-06-28 23:45:25 -04:00
|
|
|
val_u = ((color * btv->opt_uv_ratio) / 50) >> 7;
|
|
|
|
val_v = (((color * (100 - btv->opt_uv_ratio) / 50) >>7)*180L)/254;
|
2005-11-09 00:37:43 -05:00
|
|
|
hibits = (val_u >> 7) & 2;
|
2005-04-16 18:20:36 -04:00
|
|
|
hibits |= (val_v >> 8) & 1;
|
2005-11-09 00:37:43 -05:00
|
|
|
btwrite(val_u & 0xff, BT848_SAT_U_LO);
|
|
|
|
btwrite(val_v & 0xff, BT848_SAT_V_LO);
|
|
|
|
btaor(hibits, ~3, BT848_E_CONTROL);
|
|
|
|
btaor(hibits, ~3, BT848_O_CONTROL);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
|
|
|
|
static int
|
|
|
|
video_mux(struct bttv *btv, unsigned int input)
|
|
|
|
{
|
|
|
|
int mux,mask2;
|
|
|
|
|
|
|
|
if (input >= bttv_tvcards[btv->c.type].video_inputs)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* needed by RemoteVideo MX */
|
2005-04-16 18:20:36 -04:00
|
|
|
mask2 = bttv_tvcards[btv->c.type].gpiomask2;
|
|
|
|
if (mask2)
|
|
|
|
gpio_inout(mask2,mask2);
|
|
|
|
|
|
|
|
if (input == btv->svhs) {
|
|
|
|
btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
|
|
|
|
btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
|
|
|
|
} else {
|
|
|
|
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
|
|
|
|
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
|
|
|
|
}
|
|
|
|
mux = bttv_tvcards[btv->c.type].muxsel[input] & 3;
|
|
|
|
btaor(mux<<5, ~(3<<5), BT848_IFORM);
|
|
|
|
dprintk(KERN_DEBUG "bttv%d: video mux: input=%d mux=%d\n",
|
|
|
|
btv->c.nr,input,mux);
|
|
|
|
|
|
|
|
/* card specific hook */
|
|
|
|
if(bttv_tvcards[btv->c.type].muxsel_hook)
|
|
|
|
bttv_tvcards[btv->c.type].muxsel_hook (btv, input);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static char *audio_modes[] = {
|
|
|
|
"audio: tuner", "audio: radio", "audio: extern",
|
2006-03-18 19:31:00 -05:00
|
|
|
"audio: intern", "audio: mute"
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
2006-03-18 19:31:00 -05:00
|
|
|
audio_mux(struct bttv *btv, int input, int mute)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2006-03-18 19:31:00 -05:00
|
|
|
int gpio_val, signal;
|
|
|
|
struct v4l2_control ctrl;
|
|
|
|
struct i2c_client *c;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
gpio_inout(bttv_tvcards[btv->c.type].gpiomask,
|
|
|
|
bttv_tvcards[btv->c.type].gpiomask);
|
|
|
|
signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC;
|
|
|
|
|
2006-03-18 19:31:00 -05:00
|
|
|
btv->mute = mute;
|
|
|
|
btv->audio = input;
|
|
|
|
|
|
|
|
/* automute */
|
|
|
|
mute = mute || (btv->opt_automute && !signal && !btv->radio_user);
|
|
|
|
|
|
|
|
if (mute)
|
|
|
|
gpio_val = bttv_tvcards[btv->c.type].gpiomute;
|
|
|
|
else
|
|
|
|
gpio_val = bttv_tvcards[btv->c.type].gpiomux[input];
|
|
|
|
|
|
|
|
gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (bttv_gpio)
|
2006-03-18 19:31:00 -05:00
|
|
|
bttv_gpio_tracking(btv, audio_modes[mute ? 4 : input]);
|
|
|
|
if (in_interrupt())
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ctrl.id = V4L2_CID_AUDIO_MUTE;
|
2006-03-19 10:35:57 -05:00
|
|
|
ctrl.value = btv->mute;
|
2006-03-18 19:31:00 -05:00
|
|
|
bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl);
|
|
|
|
c = btv->i2c_msp34xx_client;
|
2006-03-19 10:35:57 -05:00
|
|
|
if (c) {
|
|
|
|
struct v4l2_routing route;
|
|
|
|
|
|
|
|
/* Note: the inputs tuner/radio/extern/intern are translated
|
|
|
|
to msp routings. This assumes common behavior for all msp3400
|
|
|
|
based TV cards. When this assumption fails, then the
|
|
|
|
specific MSP routing must be added to the card table.
|
|
|
|
For now this is sufficient. */
|
|
|
|
switch (input) {
|
|
|
|
case TVAUDIO_INPUT_RADIO:
|
2006-04-01 16:03:23 -05:00
|
|
|
route.input = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1,
|
|
|
|
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART);
|
2006-03-19 10:35:57 -05:00
|
|
|
break;
|
|
|
|
case TVAUDIO_INPUT_EXTERN:
|
2006-04-01 16:03:23 -05:00
|
|
|
route.input = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
|
|
|
|
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART);
|
2006-03-19 10:35:57 -05:00
|
|
|
break;
|
|
|
|
case TVAUDIO_INPUT_INTERN:
|
|
|
|
/* Yes, this is the same input as for RADIO. I doubt
|
|
|
|
if this is ever used. The only board with an INTERN
|
|
|
|
input is the BTTV_BOARD_AVERMEDIA98. I wonder how
|
|
|
|
that was tested. My guess is that the whole INTERN
|
|
|
|
input does not work. */
|
2006-04-01 16:03:23 -05:00
|
|
|
route.input = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1,
|
|
|
|
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART);
|
2006-03-19 10:35:57 -05:00
|
|
|
break;
|
|
|
|
case TVAUDIO_INPUT_TUNER:
|
|
|
|
default:
|
|
|
|
route.input = MSP_INPUT_DEFAULT;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
route.output = MSP_OUTPUT_DEFAULT;
|
|
|
|
c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
|
|
|
|
}
|
2006-03-18 19:31:00 -05:00
|
|
|
c = btv->i2c_tvaudio_client;
|
2006-03-19 10:35:57 -05:00
|
|
|
if (c) {
|
|
|
|
struct v4l2_routing route;
|
|
|
|
|
|
|
|
route.input = input;
|
|
|
|
route.output = 0;
|
|
|
|
c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-03-18 19:31:00 -05:00
|
|
|
static inline int
|
|
|
|
audio_mute(struct bttv *btv, int mute)
|
|
|
|
{
|
|
|
|
return audio_mux(btv, btv->audio, mute);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
audio_input(struct bttv *btv, int input)
|
|
|
|
{
|
|
|
|
return audio_mux(btv, input, btv->mute);
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
static void
|
|
|
|
i2c_vidiocschan(struct bttv *btv)
|
|
|
|
{
|
2006-03-30 17:50:34 -05:00
|
|
|
v4l2_std_id std = bttv_tvnorms[btv->tvnorm].v4l2_id;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2006-03-30 17:50:34 -05:00
|
|
|
bttv_call_i2c_clients(btv, VIDIOC_S_STD, &std);
|
2005-11-09 00:36:52 -05:00
|
|
|
if (btv->c.type == BTTV_BOARD_VOODOOTV_FM)
|
2006-03-30 17:50:34 -05:00
|
|
|
bttv_tda9880_setnorm(btv,btv->tvnorm);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
static void
|
|
|
|
bttv_crop_calc_limits(struct bttv_crop *c)
|
|
|
|
{
|
|
|
|
/* Scale factor min. 1:1, max. 16:1. Min. image size
|
|
|
|
48 x 32. Scaled width must be a multiple of 4. */
|
|
|
|
|
|
|
|
if (1) {
|
|
|
|
/* For bug compatibility with VIDIOCGCAP and image
|
|
|
|
size checks in earlier driver versions. */
|
|
|
|
c->min_scaled_width = 48;
|
|
|
|
c->min_scaled_height = 32;
|
|
|
|
} else {
|
|
|
|
c->min_scaled_width =
|
|
|
|
(max(48, c->rect.width >> 4) + 3) & ~3;
|
|
|
|
c->min_scaled_height =
|
|
|
|
max(32, c->rect.height >> 4);
|
|
|
|
}
|
|
|
|
|
|
|
|
c->max_scaled_width = c->rect.width & ~3;
|
|
|
|
c->max_scaled_height = c->rect.height;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bttv_crop_reset(struct bttv_crop *c, int norm)
|
|
|
|
{
|
|
|
|
c->rect = bttv_tvnorms[norm].cropcap.defrect;
|
|
|
|
bttv_crop_calc_limits(c);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Call with btv->lock down. */
|
2005-04-16 18:20:36 -04:00
|
|
|
static int
|
|
|
|
set_tvnorm(struct bttv *btv, unsigned int norm)
|
|
|
|
{
|
|
|
|
const struct bttv_tvnorm *tvnorm;
|
|
|
|
|
|
|
|
if (norm < 0 || norm >= BTTV_TVNORMS)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
tvnorm = &bttv_tvnorms[norm];
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
if (btv->tvnorm < 0 ||
|
|
|
|
btv->tvnorm >= BTTV_TVNORMS ||
|
|
|
|
0 != memcmp(&bttv_tvnorms[btv->tvnorm].cropcap,
|
|
|
|
&tvnorm->cropcap,
|
|
|
|
sizeof (tvnorm->cropcap))) {
|
|
|
|
bttv_crop_reset(&btv->crop[0], norm);
|
|
|
|
btv->crop[1] = btv->crop[0]; /* current = default */
|
|
|
|
|
|
|
|
if (0 == (btv->resources & VIDEO_RESOURCES)) {
|
|
|
|
btv->crop_start = tvnorm->cropcap.bounds.top
|
|
|
|
+ tvnorm->cropcap.bounds.height;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
btv->tvnorm = norm;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
btwrite(tvnorm->adelay, BT848_ADELAY);
|
|
|
|
btwrite(tvnorm->bdelay, BT848_BDELAY);
|
|
|
|
btaor(tvnorm->iform,~(BT848_IFORM_NORM|BT848_IFORM_XTBOTH),
|
|
|
|
BT848_IFORM);
|
|
|
|
btwrite(tvnorm->vbipack, BT848_VBI_PACK_SIZE);
|
|
|
|
btwrite(1, BT848_VBI_PACK_DEL);
|
|
|
|
bt848A_set_timing(btv);
|
|
|
|
|
|
|
|
switch (btv->c.type) {
|
2005-11-09 00:36:52 -05:00
|
|
|
case BTTV_BOARD_VOODOOTV_FM:
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_tda9880_setnorm(btv,norm);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
/* Call with btv->lock down. */
|
2005-04-16 18:20:36 -04:00
|
|
|
static void
|
V4L/DVB (5808): Bttv: fix v4l1 breaking the driver
If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as
the first user after the driver is loaded, the driver wedges itself and will
never capture properly. Even if one uses a V4L2 application later, it still
won't work.
If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2
driver, then the driver will be ok. One can then run a V4L1 application, and
it will work.
It turns out the problem is with norm changing and the crop support that was
added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was
set too across opens. If one changes the norm via V4L1, the cropping
parameters are not reset like they should be, and they'll remain broken across
device opens.
This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl
VIDIOCSCHAN handler. The norm is set via the existing call to set_input(),
which calls set_tvnorm(), which will reset the cropping values now that it is
able to detect the norm change.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03 14:08:10 -04:00
|
|
|
set_input(struct bttv *btv, unsigned int input, unsigned int norm)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
btv->input = input;
|
|
|
|
if (irq_iswitch) {
|
|
|
|
spin_lock_irqsave(&btv->s_lock,flags);
|
|
|
|
if (btv->curr.frame_irq) {
|
|
|
|
/* active capture -> delayed input switch */
|
|
|
|
btv->new_input = input;
|
|
|
|
} else {
|
|
|
|
video_mux(btv,input);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&btv->s_lock,flags);
|
|
|
|
} else {
|
|
|
|
video_mux(btv,input);
|
|
|
|
}
|
2006-03-18 19:31:00 -05:00
|
|
|
audio_input(btv,(input == bttv_tvcards[btv->c.type].tuner ?
|
|
|
|
TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN));
|
V4L/DVB (5808): Bttv: fix v4l1 breaking the driver
If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as
the first user after the driver is loaded, the driver wedges itself and will
never capture properly. Even if one uses a V4L2 application later, it still
won't work.
If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2
driver, then the driver will be ok. One can then run a V4L1 application, and
it will work.
It turns out the problem is with norm changing and the crop support that was
added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was
set too across opens. If one changes the norm via V4L1, the cropping
parameters are not reset like they should be, and they'll remain broken across
device opens.
This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl
VIDIOCSCHAN handler. The norm is set via the existing call to set_input(),
which calls set_tvnorm(), which will reset the cropping values now that it is
able to detect the norm change.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03 14:08:10 -04:00
|
|
|
set_tvnorm(btv, norm);
|
2005-04-16 18:20:36 -04:00
|
|
|
i2c_vidiocschan(btv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void init_irqreg(struct bttv *btv)
|
|
|
|
{
|
|
|
|
/* clear status */
|
|
|
|
btwrite(0xfffffUL, BT848_INT_STAT);
|
|
|
|
|
|
|
|
if (bttv_tvcards[btv->c.type].no_video) {
|
|
|
|
/* i2c only */
|
|
|
|
btwrite(BT848_INT_I2CDONE,
|
|
|
|
BT848_INT_MASK);
|
|
|
|
} else {
|
|
|
|
/* full video */
|
|
|
|
btwrite((btv->triton1) |
|
|
|
|
(btv->gpioirq ? BT848_INT_GPINT : 0) |
|
|
|
|
BT848_INT_SCERR |
|
|
|
|
(fdsr ? BT848_INT_FDSR : 0) |
|
|
|
|
BT848_INT_RISCI|BT848_INT_OCERR|BT848_INT_VPRES|
|
|
|
|
BT848_INT_FMTCHG|BT848_INT_HLOCK|
|
|
|
|
BT848_INT_I2CDONE,
|
|
|
|
BT848_INT_MASK);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void init_bt848(struct bttv *btv)
|
|
|
|
{
|
|
|
|
int val;
|
|
|
|
|
|
|
|
if (bttv_tvcards[btv->c.type].no_video) {
|
|
|
|
/* very basic init only */
|
|
|
|
init_irqreg(btv);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
btwrite(0x00, BT848_CAP_CTL);
|
|
|
|
btwrite(BT848_COLOR_CTL_GAMMA, BT848_COLOR_CTL);
|
|
|
|
btwrite(BT848_IFORM_XTAUTO | BT848_IFORM_AUTO, BT848_IFORM);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* set planar and packed mode trigger points and */
|
|
|
|
/* set rising edge of inverted GPINTR pin as irq trigger */
|
|
|
|
btwrite(BT848_GPIO_DMA_CTL_PKTP_32|
|
|
|
|
BT848_GPIO_DMA_CTL_PLTP1_16|
|
|
|
|
BT848_GPIO_DMA_CTL_PLTP23_16|
|
|
|
|
BT848_GPIO_DMA_CTL_GPINTC|
|
|
|
|
BT848_GPIO_DMA_CTL_GPINTI,
|
|
|
|
BT848_GPIO_DMA_CTL);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0;
|
2005-11-09 00:37:43 -05:00
|
|
|
btwrite(val, BT848_E_SCLOOP);
|
|
|
|
btwrite(val, BT848_O_SCLOOP);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
btwrite(0x20, BT848_E_VSCALE_HI);
|
|
|
|
btwrite(0x20, BT848_O_VSCALE_HI);
|
|
|
|
btwrite(BT848_ADC_RESERVED | (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0),
|
2005-04-16 18:20:36 -04:00
|
|
|
BT848_ADC);
|
|
|
|
|
|
|
|
btwrite(whitecrush_upper, BT848_WC_UP);
|
|
|
|
btwrite(whitecrush_lower, BT848_WC_DOWN);
|
|
|
|
|
|
|
|
if (btv->opt_lumafilter) {
|
|
|
|
btwrite(0, BT848_E_CONTROL);
|
|
|
|
btwrite(0, BT848_O_CONTROL);
|
|
|
|
} else {
|
|
|
|
btwrite(BT848_CONTROL_LDEC, BT848_E_CONTROL);
|
|
|
|
btwrite(BT848_CONTROL_LDEC, BT848_O_CONTROL);
|
|
|
|
}
|
|
|
|
|
|
|
|
bt848_bright(btv, btv->bright);
|
|
|
|
bt848_hue(btv, btv->hue);
|
|
|
|
bt848_contrast(btv, btv->contrast);
|
|
|
|
bt848_sat(btv, btv->saturation);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* interrupt */
|
2005-04-16 18:20:36 -04:00
|
|
|
init_irqreg(btv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bttv_reinit_bt848(struct bttv *btv)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if (bttv_verbose)
|
|
|
|
printk(KERN_INFO "bttv%d: reset, reinitialize\n",btv->c.nr);
|
|
|
|
spin_lock_irqsave(&btv->s_lock,flags);
|
|
|
|
btv->errors=0;
|
|
|
|
bttv_set_dma(btv,0);
|
|
|
|
spin_unlock_irqrestore(&btv->s_lock,flags);
|
|
|
|
|
|
|
|
init_bt848(btv);
|
2005-11-09 00:37:43 -05:00
|
|
|
btv->pll.pll_current = -1;
|
V4L/DVB (5808): Bttv: fix v4l1 breaking the driver
If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as
the first user after the driver is loaded, the driver wedges itself and will
never capture properly. Even if one uses a V4L2 application later, it still
won't work.
If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2
driver, then the driver will be ok. One can then run a V4L1 application, and
it will work.
It turns out the problem is with norm changing and the crop support that was
added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was
set too across opens. If one changes the norm via V4L1, the cropping
parameters are not reset like they should be, and they'll remain broken across
device opens.
This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl
VIDIOCSCHAN handler. The norm is set via the existing call to set_input(),
which calls set_tvnorm(), which will reset the cropping values now that it is
able to detect the norm change.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03 14:08:10 -04:00
|
|
|
set_input(btv, btv->input, btv->tvnorm);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static int get_control(struct bttv *btv, struct v4l2_control *c)
|
|
|
|
{
|
|
|
|
struct video_audio va;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < BTTV_CTLS; i++)
|
|
|
|
if (bttv_ctls[i].id == c->id)
|
|
|
|
break;
|
|
|
|
if (i == BTTV_CTLS)
|
|
|
|
return -EINVAL;
|
2006-03-30 17:50:34 -05:00
|
|
|
if (btv->audio_hook && i >= 4 && i <= 8) {
|
2005-04-16 18:20:36 -04:00
|
|
|
memset(&va,0,sizeof(va));
|
2006-03-30 17:50:34 -05:00
|
|
|
btv->audio_hook(btv,&va,0);
|
|
|
|
switch (c->id) {
|
|
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
|
|
c->value = (VIDEO_AUDIO_MUTE & va.flags) ? 1 : 0;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
|
|
c->value = va.volume;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_BALANCE:
|
|
|
|
c->value = va.balance;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_BASS:
|
|
|
|
c->value = va.bass;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_TREBLE:
|
|
|
|
c->value = va.treble;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
switch (c->id) {
|
|
|
|
case V4L2_CID_BRIGHTNESS:
|
|
|
|
c->value = btv->bright;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_HUE:
|
|
|
|
c->value = btv->hue;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_CONTRAST:
|
|
|
|
c->value = btv->contrast;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_SATURATION:
|
|
|
|
c->value = btv->saturation;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
|
|
case V4L2_CID_AUDIO_BALANCE:
|
|
|
|
case V4L2_CID_AUDIO_BASS:
|
|
|
|
case V4L2_CID_AUDIO_TREBLE:
|
2006-03-30 17:50:34 -05:00
|
|
|
bttv_call_i2c_clients(btv,VIDIOC_G_CTRL,c);
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
|
|
|
|
case V4L2_CID_PRIVATE_CHROMA_AGC:
|
|
|
|
c->value = btv->opt_chroma_agc;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_COMBFILTER:
|
|
|
|
c->value = btv->opt_combfilter;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_LUMAFILTER:
|
|
|
|
c->value = btv->opt_lumafilter;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_AUTOMUTE:
|
|
|
|
c->value = btv->opt_automute;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_AGC_CRUSH:
|
|
|
|
c->value = btv->opt_adc_crush;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_VCR_HACK:
|
|
|
|
c->value = btv->opt_vcr_hack;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_WHITECRUSH_UPPER:
|
|
|
|
c->value = btv->opt_whitecrush_upper;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_WHITECRUSH_LOWER:
|
|
|
|
c->value = btv->opt_whitecrush_lower;
|
|
|
|
break;
|
2005-06-28 23:45:25 -04:00
|
|
|
case V4L2_CID_PRIVATE_UV_RATIO:
|
|
|
|
c->value = btv->opt_uv_ratio;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_FULL_LUMA_RANGE:
|
|
|
|
c->value = btv->opt_full_luma_range;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_CORING:
|
|
|
|
c->value = btv->opt_coring;
|
|
|
|
break;
|
2005-04-16 18:20:36 -04:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int set_control(struct bttv *btv, struct v4l2_control *c)
|
|
|
|
{
|
|
|
|
struct video_audio va;
|
|
|
|
int i,val;
|
|
|
|
|
|
|
|
for (i = 0; i < BTTV_CTLS; i++)
|
|
|
|
if (bttv_ctls[i].id == c->id)
|
|
|
|
break;
|
|
|
|
if (i == BTTV_CTLS)
|
|
|
|
return -EINVAL;
|
2006-03-30 17:50:34 -05:00
|
|
|
if (btv->audio_hook && i >= 4 && i <= 8) {
|
2005-04-16 18:20:36 -04:00
|
|
|
memset(&va,0,sizeof(va));
|
2006-03-30 17:50:34 -05:00
|
|
|
btv->audio_hook(btv,&va,0);
|
|
|
|
switch (c->id) {
|
|
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
|
|
if (c->value) {
|
|
|
|
va.flags |= VIDEO_AUDIO_MUTE;
|
|
|
|
audio_mute(btv, 1);
|
|
|
|
} else {
|
|
|
|
va.flags &= ~VIDEO_AUDIO_MUTE;
|
|
|
|
audio_mute(btv, 0);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
|
|
va.volume = c->value;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_BALANCE:
|
|
|
|
va.balance = c->value;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_BASS:
|
|
|
|
va.bass = c->value;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_TREBLE:
|
|
|
|
va.treble = c->value;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
btv->audio_hook(btv,&va,1);
|
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
switch (c->id) {
|
|
|
|
case V4L2_CID_BRIGHTNESS:
|
|
|
|
bt848_bright(btv,c->value);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_HUE:
|
|
|
|
bt848_hue(btv,c->value);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_CONTRAST:
|
|
|
|
bt848_contrast(btv,c->value);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_SATURATION:
|
|
|
|
bt848_sat(btv,c->value);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_MUTE:
|
2006-03-30 17:50:34 -05:00
|
|
|
audio_mute(btv, c->value);
|
|
|
|
/* fall through */
|
2005-04-16 18:20:36 -04:00
|
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
|
|
case V4L2_CID_AUDIO_BALANCE:
|
|
|
|
case V4L2_CID_AUDIO_BASS:
|
|
|
|
case V4L2_CID_AUDIO_TREBLE:
|
2006-03-30 17:50:34 -05:00
|
|
|
bttv_call_i2c_clients(btv,VIDIOC_S_CTRL,c);
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
|
|
|
|
case V4L2_CID_PRIVATE_CHROMA_AGC:
|
|
|
|
btv->opt_chroma_agc = c->value;
|
|
|
|
val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0;
|
|
|
|
btwrite(val, BT848_E_SCLOOP);
|
|
|
|
btwrite(val, BT848_O_SCLOOP);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_COMBFILTER:
|
|
|
|
btv->opt_combfilter = c->value;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_LUMAFILTER:
|
|
|
|
btv->opt_lumafilter = c->value;
|
|
|
|
if (btv->opt_lumafilter) {
|
|
|
|
btand(~BT848_CONTROL_LDEC, BT848_E_CONTROL);
|
|
|
|
btand(~BT848_CONTROL_LDEC, BT848_O_CONTROL);
|
|
|
|
} else {
|
|
|
|
btor(BT848_CONTROL_LDEC, BT848_E_CONTROL);
|
|
|
|
btor(BT848_CONTROL_LDEC, BT848_O_CONTROL);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_AUTOMUTE:
|
|
|
|
btv->opt_automute = c->value;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_AGC_CRUSH:
|
|
|
|
btv->opt_adc_crush = c->value;
|
|
|
|
btwrite(BT848_ADC_RESERVED | (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0),
|
|
|
|
BT848_ADC);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_VCR_HACK:
|
|
|
|
btv->opt_vcr_hack = c->value;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_WHITECRUSH_UPPER:
|
|
|
|
btv->opt_whitecrush_upper = c->value;
|
|
|
|
btwrite(c->value, BT848_WC_UP);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_WHITECRUSH_LOWER:
|
|
|
|
btv->opt_whitecrush_lower = c->value;
|
|
|
|
btwrite(c->value, BT848_WC_DOWN);
|
|
|
|
break;
|
2005-06-28 23:45:25 -04:00
|
|
|
case V4L2_CID_PRIVATE_UV_RATIO:
|
|
|
|
btv->opt_uv_ratio = c->value;
|
|
|
|
bt848_sat(btv, btv->saturation);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_FULL_LUMA_RANGE:
|
|
|
|
btv->opt_full_luma_range = c->value;
|
|
|
|
btaor((c->value<<7), ~BT848_OFORM_RANGE, BT848_OFORM);
|
|
|
|
break;
|
|
|
|
case V4L2_CID_PRIVATE_CORING:
|
|
|
|
btv->opt_coring = c->value;
|
|
|
|
btaor((c->value<<5), ~BT848_OFORM_CORE32, BT848_OFORM);
|
|
|
|
break;
|
2005-04-16 18:20:36 -04:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
|
|
|
|
void bttv_gpio_tracking(struct bttv *btv, char *comment)
|
|
|
|
{
|
|
|
|
unsigned int outbits, data;
|
|
|
|
outbits = btread(BT848_GPIO_OUT_EN);
|
|
|
|
data = btread(BT848_GPIO_DATA);
|
|
|
|
printk(KERN_DEBUG "bttv%d: gpio: en=%08x, out=%08x in=%08x [%s]\n",
|
|
|
|
btv->c.nr,outbits,data & outbits, data & ~outbits, comment);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bttv_field_count(struct bttv *btv)
|
|
|
|
{
|
|
|
|
int need_count = 0;
|
|
|
|
|
|
|
|
if (btv->users)
|
|
|
|
need_count++;
|
|
|
|
|
|
|
|
if (need_count) {
|
|
|
|
/* start field counter */
|
|
|
|
btor(BT848_INT_VSYNC,BT848_INT_MASK);
|
|
|
|
} else {
|
|
|
|
/* stop field counter */
|
|
|
|
btand(~BT848_INT_VSYNC,BT848_INT_MASK);
|
|
|
|
btv->field_count = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct bttv_format*
|
|
|
|
format_by_palette(int palette)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < BTTV_FORMATS; i++) {
|
|
|
|
if (-1 == bttv_formats[i].palette)
|
|
|
|
continue;
|
|
|
|
if (bttv_formats[i].palette == palette)
|
|
|
|
return bttv_formats+i;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct bttv_format*
|
|
|
|
format_by_fourcc(int fourcc)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < BTTV_FORMATS; i++) {
|
|
|
|
if (-1 == bttv_formats[i].fourcc)
|
|
|
|
continue;
|
|
|
|
if (bttv_formats[i].fourcc == fourcc)
|
|
|
|
return bttv_formats+i;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* misc helpers */
|
|
|
|
|
|
|
|
static int
|
|
|
|
bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh,
|
|
|
|
struct bttv_buffer *new)
|
|
|
|
{
|
|
|
|
struct bttv_buffer *old;
|
|
|
|
unsigned long flags;
|
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
dprintk("switch_overlay: enter [new=%p]\n",new);
|
|
|
|
if (new)
|
|
|
|
new->vb.state = STATE_DONE;
|
|
|
|
spin_lock_irqsave(&btv->s_lock,flags);
|
|
|
|
old = btv->screen;
|
|
|
|
btv->screen = new;
|
|
|
|
btv->loop_irq |= 1;
|
|
|
|
bttv_set_dma(btv, 0x03);
|
|
|
|
spin_unlock_irqrestore(&btv->s_lock,flags);
|
|
|
|
if (NULL != old) {
|
|
|
|
dprintk("switch_overlay: old=%p state is %d\n",old,old->vb.state);
|
2006-03-10 10:29:15 -05:00
|
|
|
bttv_dma_free(&fh->cap,btv, old);
|
2005-04-16 18:20:36 -04:00
|
|
|
kfree(old);
|
|
|
|
}
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
if (NULL == new)
|
|
|
|
free_btres(btv,fh,RESOURCE_OVERLAY);
|
2005-04-16 18:20:36 -04:00
|
|
|
dprintk("switch_overlay: done\n");
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* video4linux (1) interface */
|
|
|
|
|
2006-03-10 10:29:15 -05:00
|
|
|
static int bttv_prepare_buffer(struct videobuf_queue *q,struct bttv *btv,
|
|
|
|
struct bttv_buffer *buf,
|
2005-11-09 00:37:43 -05:00
|
|
|
const struct bttv_format *fmt,
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int width, unsigned int height,
|
|
|
|
enum v4l2_field field)
|
|
|
|
{
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
struct bttv_fh *fh = q->priv_data;
|
2005-04-16 18:20:36 -04:00
|
|
|
int redo_dma_risc = 0;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
struct bttv_crop c;
|
|
|
|
int norm;
|
2005-04-16 18:20:36 -04:00
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* check settings */
|
|
|
|
if (NULL == fmt)
|
|
|
|
return -EINVAL;
|
|
|
|
if (fmt->btformat == BT848_COLOR_FMT_RAW) {
|
|
|
|
width = RAW_BPL;
|
|
|
|
height = RAW_LINES*2;
|
|
|
|
if (width*height > buf->vb.bsize)
|
|
|
|
return -EINVAL;
|
|
|
|
buf->vb.size = buf->vb.bsize;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
|
|
|
|
/* Make sure tvnorm and vbi_end remain consistent
|
|
|
|
until we're done. */
|
|
|
|
mutex_lock(&btv->lock);
|
|
|
|
|
|
|
|
norm = btv->tvnorm;
|
|
|
|
|
|
|
|
/* In this mode capturing always starts at defrect.top
|
|
|
|
(default VDELAY), ignoring cropping parameters. */
|
|
|
|
if (btv->vbi_end > bttv_tvnorms[norm].cropcap.defrect.top) {
|
|
|
|
mutex_unlock(&btv->lock);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&btv->lock);
|
|
|
|
|
|
|
|
c.rect = bttv_tvnorms[norm].cropcap.defrect;
|
2005-04-16 18:20:36 -04:00
|
|
|
} else {
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
mutex_lock(&btv->lock);
|
|
|
|
|
|
|
|
norm = btv->tvnorm;
|
|
|
|
c = btv->crop[!!fh->do_crop];
|
|
|
|
|
|
|
|
mutex_unlock(&btv->lock);
|
|
|
|
|
|
|
|
if (width < c.min_scaled_width ||
|
|
|
|
width > c.max_scaled_width ||
|
|
|
|
height < c.min_scaled_height)
|
2005-04-16 18:20:36 -04:00
|
|
|
return -EINVAL;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
|
|
|
|
switch (field) {
|
|
|
|
case V4L2_FIELD_TOP:
|
|
|
|
case V4L2_FIELD_BOTTOM:
|
|
|
|
case V4L2_FIELD_ALTERNATE:
|
|
|
|
/* btv->crop counts frame lines. Max. scale
|
|
|
|
factor is 16:1 for frames, 8:1 for fields. */
|
|
|
|
if (height * 2 > c.max_scaled_height)
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
if (height > c.max_scaled_height)
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
buf->vb.size = (width * height * fmt->depth) >> 3;
|
|
|
|
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* alloc + fill struct bttv_buffer (if changed) */
|
|
|
|
if (buf->vb.width != width || buf->vb.height != height ||
|
|
|
|
buf->vb.field != field ||
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
buf->tvnorm != norm || buf->fmt != fmt ||
|
|
|
|
buf->crop.top != c.rect.top ||
|
|
|
|
buf->crop.left != c.rect.left ||
|
|
|
|
buf->crop.width != c.rect.width ||
|
|
|
|
buf->crop.height != c.rect.height) {
|
2005-04-16 18:20:36 -04:00
|
|
|
buf->vb.width = width;
|
|
|
|
buf->vb.height = height;
|
|
|
|
buf->vb.field = field;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
buf->tvnorm = norm;
|
2005-04-16 18:20:36 -04:00
|
|
|
buf->fmt = fmt;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
buf->crop = c.rect;
|
2005-04-16 18:20:36 -04:00
|
|
|
redo_dma_risc = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* alloc risc memory */
|
|
|
|
if (STATE_NEEDS_INIT == buf->vb.state) {
|
|
|
|
redo_dma_risc = 1;
|
2006-03-10 10:29:15 -05:00
|
|
|
if (0 != (rc = videobuf_iolock(q,&buf->vb,&btv->fbuf)))
|
2005-04-16 18:20:36 -04:00
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (redo_dma_risc)
|
|
|
|
if (0 != (rc = bttv_buffer_risc(btv,buf)))
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
buf->vb.state = STATE_PREPARED;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail:
|
2006-03-10 10:29:15 -05:00
|
|
|
bttv_dma_free(q,btv,buf);
|
2005-04-16 18:20:36 -04:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
|
|
|
|
{
|
|
|
|
struct bttv_fh *fh = q->priv_data;
|
|
|
|
|
|
|
|
*size = fh->fmt->depth*fh->width*fh->height >> 3;
|
|
|
|
if (0 == *count)
|
|
|
|
*count = gbuffers;
|
|
|
|
while (*size * *count > gbuffers * gbufsize)
|
|
|
|
(*count)--;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
|
|
|
|
enum v4l2_field field)
|
|
|
|
{
|
|
|
|
struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
|
|
|
|
struct bttv_fh *fh = q->priv_data;
|
|
|
|
|
2006-03-10 10:29:15 -05:00
|
|
|
return bttv_prepare_buffer(q,fh->btv, buf, fh->fmt,
|
2005-04-16 18:20:36 -04:00
|
|
|
fh->width, fh->height, field);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
|
|
|
|
{
|
|
|
|
struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
|
|
|
|
struct bttv_fh *fh = q->priv_data;
|
|
|
|
struct bttv *btv = fh->btv;
|
|
|
|
|
|
|
|
buf->vb.state = STATE_QUEUED;
|
|
|
|
list_add_tail(&buf->vb.queue,&btv->capture);
|
|
|
|
if (!btv->curr.frame_irq) {
|
|
|
|
btv->loop_irq |= 1;
|
|
|
|
bttv_set_dma(btv, 0x03);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
|
|
|
|
{
|
|
|
|
struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
|
|
|
|
struct bttv_fh *fh = q->priv_data;
|
|
|
|
|
2007-01-26 06:30:05 -05:00
|
|
|
bttv_dma_free(q,fh->btv,buf);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct videobuf_queue_ops bttv_video_qops = {
|
|
|
|
.buf_setup = buffer_setup,
|
|
|
|
.buf_prepare = buffer_prepare,
|
|
|
|
.buf_queue = buffer_queue,
|
|
|
|
.buf_release = buffer_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
|
|
|
|
{
|
|
|
|
switch (cmd) {
|
2005-11-09 00:37:43 -05:00
|
|
|
case BTTV_VERSION:
|
|
|
|
return BTTV_VERSION_CODE;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* *** v4l1 *** ************************************************ */
|
|
|
|
case VIDIOCGFREQ:
|
|
|
|
{
|
|
|
|
unsigned long *freq = arg;
|
|
|
|
*freq = btv->freq;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCSFREQ:
|
|
|
|
{
|
2006-04-01 13:27:52 -05:00
|
|
|
struct v4l2_frequency freq;
|
|
|
|
|
|
|
|
memset(&freq, 0, sizeof(freq));
|
|
|
|
freq.frequency = *(unsigned long *)arg;
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2006-04-01 13:27:52 -05:00
|
|
|
freq.type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
|
|
|
|
btv->freq = *(unsigned long *)arg;
|
|
|
|
bttv_call_i2c_clients(btv,VIDIOC_S_FREQUENCY,&freq);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (btv->has_matchbox && btv->radio_user)
|
2006-04-01 13:27:52 -05:00
|
|
|
tea5757_set_freq(btv,*(unsigned long *)arg);
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOCGTUNER:
|
|
|
|
{
|
|
|
|
struct video_tuner *v = arg;
|
|
|
|
|
|
|
|
if (UNSET == bttv_tvcards[btv->c.type].tuner)
|
|
|
|
return -EINVAL;
|
|
|
|
if (v->tuner) /* Only tuner 0 */
|
|
|
|
return -EINVAL;
|
|
|
|
strcpy(v->name, "Television");
|
|
|
|
v->rangelow = 0;
|
|
|
|
v->rangehigh = 0x7FFFFFFF;
|
|
|
|
v->flags = VIDEO_TUNER_PAL|VIDEO_TUNER_NTSC|VIDEO_TUNER_SECAM;
|
|
|
|
v->mode = btv->tvnorm;
|
|
|
|
v->signal = (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC) ? 0xFFFF : 0;
|
|
|
|
bttv_call_i2c_clients(btv,cmd,v);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCSTUNER:
|
|
|
|
{
|
|
|
|
struct video_tuner *v = arg;
|
|
|
|
|
|
|
|
if (v->tuner) /* Only tuner 0 */
|
|
|
|
return -EINVAL;
|
|
|
|
if (v->mode >= BTTV_TVNORMS)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
set_tvnorm(btv,v->mode);
|
|
|
|
bttv_call_i2c_clients(btv,cmd,v);
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
case VIDIOCGCHAN:
|
|
|
|
{
|
|
|
|
struct video_channel *v = arg;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int channel = v->channel;
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
if (channel >= bttv_tvcards[btv->c.type].video_inputs)
|
|
|
|
return -EINVAL;
|
|
|
|
v->tuners=0;
|
|
|
|
v->flags = VIDEO_VC_AUDIO;
|
|
|
|
v->type = VIDEO_TYPE_CAMERA;
|
|
|
|
v->norm = btv->tvnorm;
|
2005-04-16 18:20:36 -04:00
|
|
|
if (channel == bttv_tvcards[btv->c.type].tuner) {
|
2005-11-09 00:37:43 -05:00
|
|
|
strcpy(v->name,"Television");
|
|
|
|
v->flags|=VIDEO_VC_TUNER;
|
|
|
|
v->type=VIDEO_TYPE_TV;
|
|
|
|
v->tuners=1;
|
|
|
|
} else if (channel == btv->svhs) {
|
|
|
|
strcpy(v->name,"S-Video");
|
|
|
|
} else {
|
|
|
|
sprintf(v->name,"Composite%d",channel);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
return 0;
|
2005-11-09 00:37:43 -05:00
|
|
|
}
|
|
|
|
case VIDIOCSCHAN:
|
|
|
|
{
|
|
|
|
struct video_channel *v = arg;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int channel = v->channel;
|
|
|
|
|
|
|
|
if (channel >= bttv_tvcards[btv->c.type].video_inputs)
|
|
|
|
return -EINVAL;
|
|
|
|
if (v->norm >= BTTV_TVNORMS)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (channel == btv->input &&
|
|
|
|
v->norm == btv->tvnorm) {
|
|
|
|
/* nothing to do */
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5808): Bttv: fix v4l1 breaking the driver
If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as
the first user after the driver is loaded, the driver wedges itself and will
never capture properly. Even if one uses a V4L2 application later, it still
won't work.
If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2
driver, then the driver will be ok. One can then run a V4L1 application, and
it will work.
It turns out the problem is with norm changing and the crop support that was
added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was
set too across opens. If one changes the norm via V4L1, the cropping
parameters are not reset like they should be, and they'll remain broken across
device opens.
This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl
VIDIOCSCHAN handler. The norm is set via the existing call to set_input(),
which calls set_tvnorm(), which will reset the cropping values now that it is
able to detect the norm change.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03 14:08:10 -04:00
|
|
|
set_input(btv, v->channel, v->norm);
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
case VIDIOCGAUDIO:
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
struct video_audio *v = arg;
|
|
|
|
|
|
|
|
memset(v,0,sizeof(*v));
|
|
|
|
strcpy(v->name,"Television");
|
|
|
|
v->flags |= VIDEO_AUDIO_MUTABLE;
|
|
|
|
v->mode = VIDEO_SOUND_MONO;
|
|
|
|
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_call_i2c_clients(btv,cmd,v);
|
|
|
|
|
|
|
|
/* card specific hooks */
|
|
|
|
if (btv->audio_hook)
|
|
|
|
btv->audio_hook(btv,v,0);
|
|
|
|
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCSAUDIO:
|
|
|
|
{
|
|
|
|
struct video_audio *v = arg;
|
|
|
|
unsigned int audio = v->audio;
|
|
|
|
|
|
|
|
if (audio >= bttv_tvcards[btv->c.type].audio_inputs)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2006-03-18 19:31:00 -05:00
|
|
|
audio_mute(btv, (v->flags&VIDEO_AUDIO_MUTE) ? 1 : 0);
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_call_i2c_clients(btv,cmd,v);
|
|
|
|
|
|
|
|
/* card specific hooks */
|
|
|
|
if (btv->audio_hook)
|
|
|
|
btv->audio_hook(btv,v,1);
|
|
|
|
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* *** v4l2 *** ************************************************ */
|
|
|
|
case VIDIOC_ENUMSTD:
|
|
|
|
{
|
|
|
|
struct v4l2_standard *e = arg;
|
|
|
|
unsigned int index = e->index;
|
|
|
|
|
|
|
|
if (index >= BTTV_TVNORMS)
|
|
|
|
return -EINVAL;
|
|
|
|
v4l2_video_std_construct(e, bttv_tvnorms[e->index].v4l2_id,
|
|
|
|
bttv_tvnorms[e->index].name);
|
|
|
|
e->index = index;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_G_STD:
|
|
|
|
{
|
|
|
|
v4l2_std_id *id = arg;
|
|
|
|
*id = bttv_tvnorms[btv->tvnorm].v4l2_id;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_S_STD:
|
|
|
|
{
|
|
|
|
v4l2_std_id *id = arg;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < BTTV_TVNORMS; i++)
|
|
|
|
if (*id & bttv_tvnorms[i].v4l2_id)
|
|
|
|
break;
|
|
|
|
if (i == BTTV_TVNORMS)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
set_tvnorm(btv,i);
|
|
|
|
i2c_vidiocschan(btv);
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_QUERYSTD:
|
|
|
|
{
|
|
|
|
v4l2_std_id *id = arg;
|
|
|
|
|
|
|
|
if (btread(BT848_DSTATUS) & BT848_DSTATUS_NUML)
|
|
|
|
*id = V4L2_STD_625_50;
|
|
|
|
else
|
|
|
|
*id = V4L2_STD_525_60;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_ENUMINPUT:
|
|
|
|
{
|
|
|
|
struct v4l2_input *i = arg;
|
|
|
|
unsigned int n;
|
|
|
|
|
|
|
|
n = i->index;
|
|
|
|
if (n >= bttv_tvcards[btv->c.type].video_inputs)
|
|
|
|
return -EINVAL;
|
|
|
|
memset(i,0,sizeof(*i));
|
|
|
|
i->index = n;
|
|
|
|
i->type = V4L2_INPUT_TYPE_CAMERA;
|
2006-11-14 10:40:07 -05:00
|
|
|
i->audioset = 1;
|
2005-04-16 18:20:36 -04:00
|
|
|
if (i->index == bttv_tvcards[btv->c.type].tuner) {
|
|
|
|
sprintf(i->name, "Television");
|
|
|
|
i->type = V4L2_INPUT_TYPE_TUNER;
|
|
|
|
i->tuner = 0;
|
|
|
|
} else if (i->index == btv->svhs) {
|
|
|
|
sprintf(i->name, "S-Video");
|
|
|
|
} else {
|
2005-11-09 00:37:43 -05:00
|
|
|
sprintf(i->name,"Composite%d",i->index);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
if (i->index == btv->input) {
|
|
|
|
__u32 dstatus = btread(BT848_DSTATUS);
|
|
|
|
if (0 == (dstatus & BT848_DSTATUS_PRES))
|
|
|
|
i->status |= V4L2_IN_ST_NO_SIGNAL;
|
|
|
|
if (0 == (dstatus & BT848_DSTATUS_HLOC))
|
|
|
|
i->status |= V4L2_IN_ST_NO_H_LOCK;
|
|
|
|
}
|
|
|
|
for (n = 0; n < BTTV_TVNORMS; n++)
|
|
|
|
i->std |= bttv_tvnorms[n].v4l2_id;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_G_INPUT:
|
|
|
|
{
|
|
|
|
int *i = arg;
|
|
|
|
*i = btv->input;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_S_INPUT:
|
|
|
|
{
|
|
|
|
unsigned int *i = arg;
|
|
|
|
|
|
|
|
if (*i > bttv_tvcards[btv->c.type].video_inputs)
|
|
|
|
return -EINVAL;
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
V4L/DVB (5808): Bttv: fix v4l1 breaking the driver
If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as
the first user after the driver is loaded, the driver wedges itself and will
never capture properly. Even if one uses a V4L2 application later, it still
won't work.
If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2
driver, then the driver will be ok. One can then run a V4L1 application, and
it will work.
It turns out the problem is with norm changing and the crop support that was
added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was
set too across opens. If one changes the norm via V4L1, the cropping
parameters are not reset like they should be, and they'll remain broken across
device opens.
This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl
VIDIOCSCHAN handler. The norm is set via the existing call to set_input(),
which calls set_tvnorm(), which will reset the cropping values now that it is
able to detect the norm change.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03 14:08:10 -04:00
|
|
|
set_input(btv, *i, btv->tvnorm);
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_G_TUNER:
|
|
|
|
{
|
|
|
|
struct v4l2_tuner *t = arg;
|
|
|
|
|
|
|
|
if (UNSET == bttv_tvcards[btv->c.type].tuner)
|
|
|
|
return -EINVAL;
|
|
|
|
if (0 != t->index)
|
|
|
|
return -EINVAL;
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
memset(t,0,sizeof(*t));
|
2006-03-30 17:50:34 -05:00
|
|
|
t->rxsubchans = V4L2_TUNER_SUB_MONO;
|
|
|
|
bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t);
|
2005-04-16 18:20:36 -04:00
|
|
|
strcpy(t->name, "Television");
|
|
|
|
t->capability = V4L2_TUNER_CAP_NORM;
|
2006-03-30 17:50:34 -05:00
|
|
|
t->type = V4L2_TUNER_ANALOG_TV;
|
2005-04-16 18:20:36 -04:00
|
|
|
if (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC)
|
|
|
|
t->signal = 0xffff;
|
2006-03-30 17:50:34 -05:00
|
|
|
|
|
|
|
if (btv->audio_hook) {
|
2005-04-16 18:20:36 -04:00
|
|
|
/* Hmmm ... */
|
|
|
|
struct video_audio va;
|
|
|
|
memset(&va, 0, sizeof(struct video_audio));
|
2006-03-30 17:50:34 -05:00
|
|
|
btv->audio_hook(btv,&va,0);
|
|
|
|
t->audmode = V4L2_TUNER_MODE_MONO;
|
|
|
|
t->rxsubchans = V4L2_TUNER_SUB_MONO;
|
2005-04-16 18:20:36 -04:00
|
|
|
if(va.mode & VIDEO_SOUND_STEREO) {
|
2006-03-30 17:50:34 -05:00
|
|
|
t->audmode = V4L2_TUNER_MODE_STEREO;
|
|
|
|
t->rxsubchans = V4L2_TUNER_SUB_STEREO;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
2006-03-30 17:50:34 -05:00
|
|
|
if(va.mode & VIDEO_SOUND_LANG2) {
|
2005-04-16 18:20:36 -04:00
|
|
|
t->audmode = V4L2_TUNER_MODE_LANG1;
|
|
|
|
t->rxsubchans = V4L2_TUNER_SUB_LANG1
|
|
|
|
| V4L2_TUNER_SUB_LANG2;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* FIXME: fill capability+audmode */
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_S_TUNER:
|
|
|
|
{
|
|
|
|
struct v4l2_tuner *t = arg;
|
|
|
|
|
|
|
|
if (UNSET == bttv_tvcards[btv->c.type].tuner)
|
|
|
|
return -EINVAL;
|
|
|
|
if (0 != t->index)
|
|
|
|
return -EINVAL;
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2006-03-30 17:50:34 -05:00
|
|
|
bttv_call_i2c_clients(btv, VIDIOC_S_TUNER, t);
|
|
|
|
if (btv->audio_hook) {
|
2005-04-16 18:20:36 -04:00
|
|
|
struct video_audio va;
|
|
|
|
memset(&va, 0, sizeof(struct video_audio));
|
|
|
|
if (t->audmode == V4L2_TUNER_MODE_MONO)
|
|
|
|
va.mode = VIDEO_SOUND_MONO;
|
2006-03-18 15:15:00 -05:00
|
|
|
else if (t->audmode == V4L2_TUNER_MODE_STEREO ||
|
|
|
|
t->audmode == V4L2_TUNER_MODE_LANG1_LANG2)
|
2005-04-16 18:20:36 -04:00
|
|
|
va.mode = VIDEO_SOUND_STEREO;
|
|
|
|
else if (t->audmode == V4L2_TUNER_MODE_LANG1)
|
|
|
|
va.mode = VIDEO_SOUND_LANG1;
|
|
|
|
else if (t->audmode == V4L2_TUNER_MODE_LANG2)
|
|
|
|
va.mode = VIDEO_SOUND_LANG2;
|
2006-03-30 17:50:34 -05:00
|
|
|
btv->audio_hook(btv,&va,1);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_G_FREQUENCY:
|
|
|
|
{
|
|
|
|
struct v4l2_frequency *f = arg;
|
|
|
|
|
|
|
|
memset(f,0,sizeof(*f));
|
|
|
|
f->type = V4L2_TUNER_ANALOG_TV;
|
|
|
|
f->frequency = btv->freq;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_S_FREQUENCY:
|
|
|
|
{
|
|
|
|
struct v4l2_frequency *f = arg;
|
|
|
|
|
|
|
|
if (unlikely(f->tuner != 0))
|
|
|
|
return -EINVAL;
|
2005-07-12 16:58:42 -04:00
|
|
|
if (unlikely (f->type != V4L2_TUNER_ANALOG_TV))
|
2005-04-16 18:20:36 -04:00
|
|
|
return -EINVAL;
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
btv->freq = f->frequency;
|
2006-03-30 17:50:34 -05:00
|
|
|
bttv_call_i2c_clients(btv,VIDIOC_S_FREQUENCY,f);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (btv->has_matchbox && btv->radio_user)
|
|
|
|
tea5757_set_freq(btv,btv->freq);
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
2005-11-09 00:37:42 -05:00
|
|
|
case VIDIOC_LOG_STATUS:
|
|
|
|
{
|
2006-03-30 17:50:34 -05:00
|
|
|
printk(KERN_INFO "bttv%d: ================= START STATUS CARD #%d =================\n", btv->c.nr, btv->c.nr);
|
2005-12-01 03:51:24 -05:00
|
|
|
bttv_call_i2c_clients(btv, VIDIOC_LOG_STATUS, NULL);
|
2006-03-30 17:50:34 -05:00
|
|
|
printk(KERN_INFO "bttv%d: ================== END STATUS CARD #%d ==================\n", btv->c.nr, btv->c.nr);
|
2005-11-09 00:37:42 -05:00
|
|
|
return 0;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
default:
|
|
|
|
return -ENOIOCTLCMD;
|
|
|
|
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
/* Given cropping boundaries b and the scaled width and height of a
|
|
|
|
single field or frame, which must not exceed hardware limits, this
|
|
|
|
function adjusts the cropping parameters c. */
|
|
|
|
static void
|
|
|
|
bttv_crop_adjust (struct bttv_crop * c,
|
|
|
|
const struct v4l2_rect * b,
|
|
|
|
__s32 width,
|
|
|
|
__s32 height,
|
|
|
|
enum v4l2_field field)
|
|
|
|
{
|
|
|
|
__s32 frame_height = height << !V4L2_FIELD_HAS_BOTH(field);
|
|
|
|
__s32 max_left;
|
|
|
|
__s32 max_top;
|
|
|
|
|
|
|
|
if (width < c->min_scaled_width) {
|
|
|
|
/* Max. hor. scale factor 16:1. */
|
|
|
|
c->rect.width = width * 16;
|
|
|
|
} else if (width > c->max_scaled_width) {
|
|
|
|
/* Min. hor. scale factor 1:1. */
|
|
|
|
c->rect.width = width;
|
|
|
|
|
|
|
|
max_left = b->left + b->width - width;
|
|
|
|
max_left = min(max_left, (__s32) MAX_HDELAY);
|
|
|
|
if (c->rect.left > max_left)
|
|
|
|
c->rect.left = max_left;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (height < c->min_scaled_height) {
|
|
|
|
/* Max. vert. scale factor 16:1, single fields 8:1. */
|
|
|
|
c->rect.height = height * 16;
|
|
|
|
} else if (frame_height > c->max_scaled_height) {
|
|
|
|
/* Min. vert. scale factor 1:1.
|
|
|
|
Top and height count field lines times two. */
|
|
|
|
c->rect.height = (frame_height + 1) & ~1;
|
|
|
|
|
|
|
|
max_top = b->top + b->height - c->rect.height;
|
|
|
|
if (c->rect.top > max_top)
|
|
|
|
c->rect.top = max_top;
|
|
|
|
}
|
|
|
|
|
|
|
|
bttv_crop_calc_limits(c);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns an error if scaling to a frame or single field with the given
|
|
|
|
width and height is not possible with the current cropping parameters
|
|
|
|
and width aligned according to width_mask. If adjust_size is TRUE the
|
|
|
|
function may adjust the width and/or height instead, rounding width
|
|
|
|
to (width + width_bias) & width_mask. If adjust_crop is TRUE it may
|
|
|
|
also adjust the current cropping parameters to get closer to the
|
|
|
|
desired image size. */
|
|
|
|
static int
|
|
|
|
limit_scaled_size (struct bttv_fh * fh,
|
|
|
|
__s32 * width,
|
|
|
|
__s32 * height,
|
|
|
|
enum v4l2_field field,
|
|
|
|
unsigned int width_mask,
|
|
|
|
unsigned int width_bias,
|
|
|
|
int adjust_size,
|
|
|
|
int adjust_crop)
|
|
|
|
{
|
|
|
|
struct bttv *btv = fh->btv;
|
|
|
|
const struct v4l2_rect *b;
|
|
|
|
struct bttv_crop *c;
|
|
|
|
__s32 min_width;
|
|
|
|
__s32 min_height;
|
|
|
|
__s32 max_width;
|
|
|
|
__s32 max_height;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
BUG_ON((int) width_mask >= 0 ||
|
|
|
|
width_bias >= (unsigned int) -width_mask);
|
|
|
|
|
|
|
|
/* Make sure tvnorm, vbi_end and the current cropping parameters
|
|
|
|
remain consistent until we're done. */
|
|
|
|
mutex_lock(&btv->lock);
|
|
|
|
|
|
|
|
b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds;
|
|
|
|
|
|
|
|
/* Do crop - use current, don't - use default parameters. */
|
|
|
|
c = &btv->crop[!!fh->do_crop];
|
|
|
|
|
|
|
|
if (fh->do_crop
|
|
|
|
&& adjust_size
|
|
|
|
&& adjust_crop
|
|
|
|
&& !locked_btres(btv, VIDEO_RESOURCES)) {
|
|
|
|
min_width = 48;
|
|
|
|
min_height = 32;
|
|
|
|
|
|
|
|
/* We cannot scale up. When the scaled image is larger
|
|
|
|
than crop.rect we adjust the crop.rect as required
|
|
|
|
by the V4L2 spec, hence cropcap.bounds are our limit. */
|
|
|
|
max_width = min(b->width, (__s32) MAX_HACTIVE);
|
|
|
|
max_height = b->height;
|
|
|
|
|
|
|
|
/* We cannot capture the same line as video and VBI data.
|
|
|
|
Note btv->vbi_end is really a minimum, see
|
|
|
|
bttv_vbi_try_fmt(). */
|
|
|
|
if (btv->vbi_end > b->top) {
|
|
|
|
max_height -= btv->vbi_end - b->top;
|
|
|
|
rc = -EBUSY;
|
|
|
|
if (min_height > max_height)
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
rc = -EBUSY;
|
|
|
|
if (btv->vbi_end > c->rect.top)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
min_width = c->min_scaled_width;
|
|
|
|
min_height = c->min_scaled_height;
|
|
|
|
max_width = c->max_scaled_width;
|
|
|
|
max_height = c->max_scaled_height;
|
|
|
|
|
|
|
|
adjust_crop = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
min_width = (min_width - width_mask - 1) & width_mask;
|
|
|
|
max_width = max_width & width_mask;
|
|
|
|
|
|
|
|
/* Max. scale factor is 16:1 for frames, 8:1 for fields. */
|
|
|
|
min_height = min_height;
|
|
|
|
/* Min. scale factor is 1:1. */
|
|
|
|
max_height >>= !V4L2_FIELD_HAS_BOTH(field);
|
|
|
|
|
|
|
|
if (adjust_size) {
|
|
|
|
*width = clamp(*width, min_width, max_width);
|
|
|
|
*height = clamp(*height, min_height, max_height);
|
|
|
|
|
|
|
|
/* Round after clamping to avoid overflow. */
|
|
|
|
*width = (*width + width_bias) & width_mask;
|
|
|
|
|
|
|
|
if (adjust_crop) {
|
|
|
|
bttv_crop_adjust(c, b, *width, *height, field);
|
|
|
|
|
|
|
|
if (btv->vbi_end > c->rect.top) {
|
|
|
|
/* Move the crop window out of the way. */
|
|
|
|
c->rect.top = btv->vbi_end;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
rc = -EINVAL;
|
|
|
|
if (*width < min_width ||
|
|
|
|
*height < min_height ||
|
|
|
|
*width > max_width ||
|
|
|
|
*height > max_height ||
|
|
|
|
0 != (*width & ~width_mask))
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = 0; /* success */
|
|
|
|
|
|
|
|
fail:
|
|
|
|
mutex_unlock(&btv->lock);
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns an error if the given overlay window dimensions are not
|
|
|
|
possible with the current cropping parameters. If adjust_size is
|
|
|
|
TRUE the function may adjust the window width and/or height
|
|
|
|
instead, however it always rounds the horizontal position and
|
|
|
|
width as btcx_align() does. If adjust_crop is TRUE the function
|
|
|
|
may also adjust the current cropping parameters to get closer
|
|
|
|
to the desired window size. */
|
|
|
|
static int
|
|
|
|
verify_window (struct bttv_fh * fh,
|
|
|
|
struct v4l2_window * win,
|
|
|
|
int adjust_size,
|
|
|
|
int adjust_crop)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
enum v4l2_field field;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
unsigned int width_mask;
|
|
|
|
int rc;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
if (win->w.width < 48 || win->w.height < 32)
|
|
|
|
return -EINVAL;
|
|
|
|
if (win->clipcount > 2048)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
field = win->field;
|
|
|
|
|
|
|
|
if (V4L2_FIELD_ANY == field) {
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
__s32 height2;
|
|
|
|
|
|
|
|
height2 = fh->btv->crop[!!fh->do_crop].rect.height >> 1;
|
|
|
|
field = (win->w.height > height2)
|
2005-04-16 18:20:36 -04:00
|
|
|
? V4L2_FIELD_INTERLACED
|
|
|
|
: V4L2_FIELD_TOP;
|
|
|
|
}
|
|
|
|
switch (field) {
|
|
|
|
case V4L2_FIELD_TOP:
|
|
|
|
case V4L2_FIELD_BOTTOM:
|
|
|
|
case V4L2_FIELD_INTERLACED:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
/* 4-byte alignment. */
|
|
|
|
if (NULL == fh->ovfmt)
|
2005-04-16 18:20:36 -04:00
|
|
|
return -EINVAL;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
width_mask = ~0;
|
|
|
|
switch (fh->ovfmt->depth) {
|
|
|
|
case 8:
|
|
|
|
case 24:
|
|
|
|
width_mask = ~3;
|
|
|
|
break;
|
|
|
|
case 16:
|
|
|
|
width_mask = ~1;
|
|
|
|
break;
|
|
|
|
case 32:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
|
|
|
|
win->w.width -= win->w.left & ~width_mask;
|
|
|
|
win->w.left = (win->w.left - width_mask - 1) & width_mask;
|
|
|
|
|
|
|
|
rc = limit_scaled_size(fh, &win->w.width, &win->w.height,
|
|
|
|
field, width_mask,
|
|
|
|
/* width_bias: round down */ 0,
|
|
|
|
adjust_size, adjust_crop);
|
|
|
|
if (0 != rc)
|
|
|
|
return rc;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
win->field = field;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int setup_window(struct bttv_fh *fh, struct bttv *btv,
|
|
|
|
struct v4l2_window *win, int fixup)
|
|
|
|
{
|
|
|
|
struct v4l2_clip *clips = NULL;
|
|
|
|
int n,size,retval = 0;
|
|
|
|
|
|
|
|
if (NULL == fh->ovfmt)
|
|
|
|
return -EINVAL;
|
|
|
|
if (!(fh->ovfmt->flags & FORMAT_FLAGS_PACKED))
|
|
|
|
return -EINVAL;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
retval = verify_window(fh, win,
|
|
|
|
/* adjust_size */ fixup,
|
|
|
|
/* adjust_crop */ fixup);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (0 != retval)
|
|
|
|
return retval;
|
|
|
|
|
|
|
|
/* copy clips -- luckily v4l1 + v4l2 are binary
|
|
|
|
compatible here ...*/
|
|
|
|
n = win->clipcount;
|
|
|
|
size = sizeof(*clips)*(n+4);
|
|
|
|
clips = kmalloc(size,GFP_KERNEL);
|
|
|
|
if (NULL == clips)
|
|
|
|
return -ENOMEM;
|
|
|
|
if (n > 0) {
|
|
|
|
if (copy_from_user(clips,win->clips,sizeof(struct v4l2_clip)*n)) {
|
|
|
|
kfree(clips);
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* clip against screen */
|
|
|
|
if (NULL != btv->fbuf.base)
|
|
|
|
n = btcx_screen_clips(btv->fbuf.fmt.width, btv->fbuf.fmt.height,
|
|
|
|
&win->w, clips, n);
|
|
|
|
btcx_sort_clips(clips,n);
|
|
|
|
|
|
|
|
/* 4-byte alignments */
|
|
|
|
switch (fh->ovfmt->depth) {
|
|
|
|
case 8:
|
|
|
|
case 24:
|
|
|
|
btcx_align(&win->w, clips, n, 3);
|
|
|
|
break;
|
|
|
|
case 16:
|
|
|
|
btcx_align(&win->w, clips, n, 1);
|
|
|
|
break;
|
|
|
|
case 32:
|
|
|
|
/* no alignment fixups needed */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-12-12 03:37:28 -05:00
|
|
|
kfree(fh->ov.clips);
|
2005-04-16 18:20:36 -04:00
|
|
|
fh->ov.clips = clips;
|
|
|
|
fh->ov.nclips = n;
|
|
|
|
|
|
|
|
fh->ov.w = win->w;
|
|
|
|
fh->ov.field = win->field;
|
|
|
|
fh->ov.setup_ok = 1;
|
|
|
|
btv->init.ov.w.width = win->w.width;
|
|
|
|
btv->init.ov.w.height = win->w.height;
|
|
|
|
btv->init.ov.field = win->field;
|
|
|
|
|
|
|
|
/* update overlay if needed */
|
|
|
|
retval = 0;
|
|
|
|
if (check_btres(fh, RESOURCE_OVERLAY)) {
|
|
|
|
struct bttv_buffer *new;
|
|
|
|
|
|
|
|
new = videobuf_alloc(sizeof(*new));
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
new->crop = btv->crop[!!fh->do_crop].rect;
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
|
|
|
|
retval = bttv_switch_overlay(btv,fh,new);
|
|
|
|
}
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
|
|
|
|
static struct videobuf_queue* bttv_queue(struct bttv_fh *fh)
|
|
|
|
{
|
|
|
|
struct videobuf_queue* q = NULL;
|
|
|
|
|
|
|
|
switch (fh->type) {
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
|
|
|
|
q = &fh->cap;
|
|
|
|
break;
|
|
|
|
case V4L2_BUF_TYPE_VBI_CAPTURE:
|
|
|
|
q = &fh->vbi;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
return q;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_resource(struct bttv_fh *fh)
|
|
|
|
{
|
|
|
|
int res = 0;
|
|
|
|
|
|
|
|
switch (fh->type) {
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
res = RESOURCE_VIDEO_STREAM;
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
case V4L2_BUF_TYPE_VBI_CAPTURE:
|
|
|
|
res = RESOURCE_VBI;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_switch_type(struct bttv_fh *fh, enum v4l2_buf_type type)
|
|
|
|
{
|
|
|
|
struct videobuf_queue *q = bttv_queue(fh);
|
|
|
|
int res = bttv_resource(fh);
|
|
|
|
|
|
|
|
if (check_btres(fh,res))
|
|
|
|
return -EBUSY;
|
|
|
|
if (videobuf_queue_is_busy(q))
|
|
|
|
return -EBUSY;
|
|
|
|
fh->type = type;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-12-01 03:51:33 -05:00
|
|
|
static void
|
|
|
|
pix_format_set_size (struct v4l2_pix_format * f,
|
|
|
|
const struct bttv_format * fmt,
|
|
|
|
unsigned int width,
|
|
|
|
unsigned int height)
|
|
|
|
{
|
|
|
|
f->width = width;
|
|
|
|
f->height = height;
|
|
|
|
|
|
|
|
if (fmt->flags & FORMAT_FLAGS_PLANAR) {
|
|
|
|
f->bytesperline = width; /* Y plane */
|
|
|
|
f->sizeimage = (width * height * fmt->depth) >> 3;
|
|
|
|
} else {
|
|
|
|
f->bytesperline = (width * fmt->depth) >> 3;
|
|
|
|
f->sizeimage = height * f->bytesperline;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
static int bttv_g_fmt(struct bttv_fh *fh, struct v4l2_format *f)
|
|
|
|
{
|
|
|
|
switch (f->type) {
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
|
|
|
|
memset(&f->fmt.pix,0,sizeof(struct v4l2_pix_format));
|
2005-12-01 03:51:33 -05:00
|
|
|
pix_format_set_size (&f->fmt.pix, fh->fmt,
|
|
|
|
fh->width, fh->height);
|
2005-04-16 18:20:36 -04:00
|
|
|
f->fmt.pix.field = fh->cap.field;
|
|
|
|
f->fmt.pix.pixelformat = fh->fmt->fourcc;
|
|
|
|
return 0;
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
|
|
|
|
memset(&f->fmt.win,0,sizeof(struct v4l2_window));
|
|
|
|
f->fmt.win.w = fh->ov.w;
|
|
|
|
f->fmt.win.field = fh->ov.field;
|
|
|
|
return 0;
|
|
|
|
case V4L2_BUF_TYPE_VBI_CAPTURE:
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
bttv_vbi_get_fmt(fh, &f->fmt.vbi);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_try_fmt(struct bttv_fh *fh, struct bttv *btv,
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
struct v4l2_format *f, int adjust_crop)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
switch (f->type) {
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
|
|
|
|
{
|
|
|
|
const struct bttv_format *fmt;
|
|
|
|
enum v4l2_field field;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
__s32 width, height;
|
|
|
|
int rc;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
|
|
|
|
if (NULL == fmt)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
field = f->fmt.pix.field;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
if (V4L2_FIELD_ANY == field) {
|
|
|
|
__s32 height2;
|
|
|
|
|
|
|
|
height2 = btv->crop[!!fh->do_crop].rect.height >> 1;
|
|
|
|
field = (f->fmt.pix.height > height2)
|
2005-04-16 18:20:36 -04:00
|
|
|
? V4L2_FIELD_INTERLACED
|
|
|
|
: V4L2_FIELD_BOTTOM;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
if (V4L2_FIELD_SEQ_BT == field)
|
|
|
|
field = V4L2_FIELD_SEQ_TB;
|
|
|
|
switch (field) {
|
|
|
|
case V4L2_FIELD_TOP:
|
|
|
|
case V4L2_FIELD_BOTTOM:
|
|
|
|
case V4L2_FIELD_ALTERNATE:
|
|
|
|
case V4L2_FIELD_INTERLACED:
|
|
|
|
break;
|
|
|
|
case V4L2_FIELD_SEQ_TB:
|
|
|
|
if (fmt->flags & FORMAT_FLAGS_PLANAR)
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
width = f->fmt.pix.width;
|
|
|
|
height = f->fmt.pix.height;
|
|
|
|
|
|
|
|
rc = limit_scaled_size(fh, &width, &height, field,
|
|
|
|
/* width_mask: 4 pixels */ ~3,
|
|
|
|
/* width_bias: nearest */ 2,
|
|
|
|
/* adjust_size */ 1,
|
|
|
|
adjust_crop);
|
|
|
|
if (0 != rc)
|
|
|
|
return rc;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* update data for the application */
|
|
|
|
f->fmt.pix.field = field;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
pix_format_set_size(&f->fmt.pix, fmt, width, height);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
return verify_window(fh, &f->fmt.win,
|
|
|
|
/* adjust_size */ 1,
|
|
|
|
/* adjust_crop */ 0);
|
2005-04-16 18:20:36 -04:00
|
|
|
case V4L2_BUF_TYPE_VBI_CAPTURE:
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
return bttv_vbi_try_fmt(fh, &f->fmt.vbi);
|
2005-04-16 18:20:36 -04:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_s_fmt(struct bttv_fh *fh, struct bttv *btv,
|
|
|
|
struct v4l2_format *f)
|
|
|
|
{
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
switch (f->type) {
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
|
|
|
|
{
|
|
|
|
const struct bttv_format *fmt;
|
|
|
|
|
|
|
|
retval = bttv_switch_type(fh,f->type);
|
|
|
|
if (0 != retval)
|
|
|
|
return retval;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
retval = bttv_try_fmt(fh,btv,f, /* adjust_crop */ 1);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (0 != retval)
|
|
|
|
return retval;
|
|
|
|
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
|
|
|
|
|
|
|
|
/* update our state informations */
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
fh->fmt = fmt;
|
|
|
|
fh->cap.field = f->fmt.pix.field;
|
|
|
|
fh->cap.last = V4L2_FIELD_NONE;
|
|
|
|
fh->width = f->fmt.pix.width;
|
|
|
|
fh->height = f->fmt.pix.height;
|
|
|
|
btv->init.fmt = fmt;
|
|
|
|
btv->init.width = f->fmt.pix.width;
|
|
|
|
btv->init.height = f->fmt.pix.height;
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
|
2005-08-04 15:53:30 -04:00
|
|
|
if (no_overlay > 0) {
|
|
|
|
printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
return setup_window(fh, btv, &f->fmt.win, 1);
|
|
|
|
case V4L2_BUF_TYPE_VBI_CAPTURE:
|
|
|
|
retval = bttv_switch_type(fh,f->type);
|
|
|
|
if (0 != retval)
|
|
|
|
return retval;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
return bttv_vbi_set_fmt(fh, &f->fmt.vbi);
|
2005-04-16 18:20:36 -04:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_do_ioctl(struct inode *inode, struct file *file,
|
|
|
|
unsigned int cmd, void *arg)
|
|
|
|
{
|
|
|
|
struct bttv_fh *fh = file->private_data;
|
|
|
|
struct bttv *btv = fh->btv;
|
|
|
|
unsigned long flags;
|
|
|
|
int retval = 0;
|
|
|
|
|
2006-01-09 12:32:31 -05:00
|
|
|
if (bttv_debug > 1)
|
|
|
|
v4l_print_ioctl(btv->c.name, cmd);
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (btv->errors)
|
|
|
|
bttv_reinit_bt848(btv);
|
|
|
|
|
|
|
|
switch (cmd) {
|
2005-11-09 00:37:43 -05:00
|
|
|
case VIDIOCSFREQ:
|
|
|
|
case VIDIOCSTUNER:
|
|
|
|
case VIDIOCSCHAN:
|
2005-04-16 18:20:36 -04:00
|
|
|
case VIDIOC_S_CTRL:
|
|
|
|
case VIDIOC_S_STD:
|
|
|
|
case VIDIOC_S_INPUT:
|
|
|
|
case VIDIOC_S_TUNER:
|
|
|
|
case VIDIOC_S_FREQUENCY:
|
|
|
|
retval = v4l2_prio_check(&btv->prio,&fh->prio);
|
|
|
|
if (0 != retval)
|
|
|
|
return retval;
|
|
|
|
};
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
|
|
|
|
/* *** v4l1 *** ************************************************ */
|
|
|
|
case VIDIOCGCAP:
|
|
|
|
{
|
2005-11-09 00:37:43 -05:00
|
|
|
struct video_capability *cap = arg;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
memset(cap,0,sizeof(*cap));
|
2005-11-09 00:37:43 -05:00
|
|
|
strcpy(cap->name,btv->video_dev->name);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) {
|
|
|
|
/* vbi */
|
|
|
|
cap->type = VID_TYPE_TUNER|VID_TYPE_TELETEXT;
|
|
|
|
} else {
|
|
|
|
/* others */
|
|
|
|
cap->type = VID_TYPE_CAPTURE|
|
|
|
|
VID_TYPE_TUNER|
|
|
|
|
VID_TYPE_CLIPPING|
|
|
|
|
VID_TYPE_SCALES;
|
2005-08-04 15:53:30 -04:00
|
|
|
if (no_overlay <= 0)
|
|
|
|
cap->type |= VID_TYPE_OVERLAY;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
cap->maxwidth = bttv_tvnorms[btv->tvnorm].swidth;
|
|
|
|
cap->maxheight = bttv_tvnorms[btv->tvnorm].sheight;
|
|
|
|
cap->minwidth = 48;
|
|
|
|
cap->minheight = 32;
|
|
|
|
}
|
|
|
|
cap->channels = bttv_tvcards[btv->c.type].video_inputs;
|
|
|
|
cap->audios = bttv_tvcards[btv->c.type].audio_inputs;
|
2005-11-09 00:37:43 -05:00
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOCGPICT:
|
|
|
|
{
|
|
|
|
struct video_picture *pic = arg;
|
|
|
|
|
|
|
|
memset(pic,0,sizeof(*pic));
|
|
|
|
pic->brightness = btv->bright;
|
|
|
|
pic->contrast = btv->contrast;
|
|
|
|
pic->hue = btv->hue;
|
|
|
|
pic->colour = btv->saturation;
|
|
|
|
if (fh->fmt) {
|
|
|
|
pic->depth = fh->fmt->depth;
|
|
|
|
pic->palette = fh->fmt->palette;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCSPICT:
|
|
|
|
{
|
|
|
|
struct video_picture *pic = arg;
|
|
|
|
const struct bttv_format *fmt;
|
|
|
|
|
|
|
|
fmt = format_by_palette(pic->palette);
|
|
|
|
if (NULL == fmt)
|
|
|
|
return -EINVAL;
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (fmt->depth != pic->depth) {
|
|
|
|
retval = -EINVAL;
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
}
|
2005-12-01 03:51:37 -05:00
|
|
|
if (fmt->flags & FORMAT_FLAGS_RAW) {
|
|
|
|
/* VIDIOCMCAPTURE uses gbufsize, not RAW_BPL *
|
|
|
|
RAW_LINES * 2. F1 is stored at offset 0, F2
|
|
|
|
at buffer size / 2. */
|
|
|
|
fh->width = RAW_BPL;
|
|
|
|
fh->height = gbufsize / RAW_BPL;
|
|
|
|
btv->init.width = RAW_BPL;
|
|
|
|
btv->init.height = gbufsize / RAW_BPL;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
fh->ovfmt = fmt;
|
|
|
|
fh->fmt = fmt;
|
|
|
|
btv->init.ovfmt = fmt;
|
|
|
|
btv->init.fmt = fmt;
|
|
|
|
if (bigendian) {
|
|
|
|
/* dirty hack time: swap bytes for overlay if the
|
|
|
|
display adaptor is big endian (insmod option) */
|
|
|
|
if (fmt->palette == VIDEO_PALETTE_RGB555 ||
|
|
|
|
fmt->palette == VIDEO_PALETTE_RGB565 ||
|
|
|
|
fmt->palette == VIDEO_PALETTE_RGB32) {
|
|
|
|
fh->ovfmt = fmt+1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
bt848_bright(btv,pic->brightness);
|
|
|
|
bt848_contrast(btv,pic->contrast);
|
|
|
|
bt848_hue(btv,pic->hue);
|
|
|
|
bt848_sat(btv,pic->colour);
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-11-09 00:37:43 -05:00
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOCGWIN:
|
|
|
|
{
|
|
|
|
struct video_window *win = arg;
|
|
|
|
|
|
|
|
memset(win,0,sizeof(*win));
|
|
|
|
win->x = fh->ov.w.left;
|
|
|
|
win->y = fh->ov.w.top;
|
|
|
|
win->width = fh->ov.w.width;
|
|
|
|
win->height = fh->ov.w.height;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCSWIN:
|
|
|
|
{
|
|
|
|
struct video_window *win = arg;
|
|
|
|
struct v4l2_window w2;
|
|
|
|
|
2005-08-04 15:53:30 -04:00
|
|
|
if (no_overlay > 0) {
|
|
|
|
printk ("VIDIOCSWIN: no_overlay\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
w2.field = V4L2_FIELD_ANY;
|
|
|
|
w2.w.left = win->x;
|
|
|
|
w2.w.top = win->y;
|
|
|
|
w2.w.width = win->width;
|
|
|
|
w2.w.height = win->height;
|
|
|
|
w2.clipcount = win->clipcount;
|
|
|
|
w2.clips = (struct v4l2_clip __user *)win->clips;
|
|
|
|
retval = setup_window(fh, btv, &w2, 0);
|
|
|
|
if (0 == retval) {
|
|
|
|
/* on v4l1 this ioctl affects the read() size too */
|
|
|
|
fh->width = fh->ov.w.width;
|
|
|
|
fh->height = fh->ov.w.height;
|
|
|
|
btv->init.width = fh->ov.w.width;
|
|
|
|
btv->init.height = fh->ov.w.height;
|
|
|
|
}
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOCGFBUF:
|
|
|
|
{
|
|
|
|
struct video_buffer *fbuf = arg;
|
|
|
|
|
|
|
|
fbuf->base = btv->fbuf.base;
|
|
|
|
fbuf->width = btv->fbuf.fmt.width;
|
|
|
|
fbuf->height = btv->fbuf.fmt.height;
|
|
|
|
fbuf->bytesperline = btv->fbuf.fmt.bytesperline;
|
|
|
|
if (fh->ovfmt)
|
|
|
|
fbuf->depth = fh->ovfmt->depth;
|
2006-08-06 08:10:06 -04:00
|
|
|
else {
|
|
|
|
if (fbuf->width)
|
|
|
|
fbuf->depth = ((fbuf->bytesperline<<3)
|
2006-08-07 19:01:01 -04:00
|
|
|
+ (fbuf->width-1) )
|
|
|
|
/fbuf->width;
|
2006-08-06 08:10:06 -04:00
|
|
|
else
|
|
|
|
fbuf->depth = 0;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCSFBUF:
|
|
|
|
{
|
|
|
|
struct video_buffer *fbuf = arg;
|
|
|
|
const struct bttv_format *fmt;
|
|
|
|
unsigned long end;
|
|
|
|
|
|
|
|
if(!capable(CAP_SYS_ADMIN) &&
|
2005-11-09 00:37:43 -05:00
|
|
|
!capable(CAP_SYS_RAWIO))
|
|
|
|
return -EPERM;
|
2005-04-16 18:20:36 -04:00
|
|
|
end = (unsigned long)fbuf->base +
|
|
|
|
fbuf->height * fbuf->bytesperline;
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
retval = -EINVAL;
|
|
|
|
|
|
|
|
switch (fbuf->depth) {
|
|
|
|
case 8:
|
|
|
|
fmt = format_by_palette(VIDEO_PALETTE_HI240);
|
|
|
|
break;
|
|
|
|
case 16:
|
|
|
|
fmt = format_by_palette(VIDEO_PALETTE_RGB565);
|
|
|
|
break;
|
|
|
|
case 24:
|
|
|
|
fmt = format_by_palette(VIDEO_PALETTE_RGB24);
|
|
|
|
break;
|
|
|
|
case 32:
|
|
|
|
fmt = format_by_palette(VIDEO_PALETTE_RGB32);
|
|
|
|
break;
|
|
|
|
case 15:
|
|
|
|
fbuf->depth = 16;
|
|
|
|
fmt = format_by_palette(VIDEO_PALETTE_RGB555);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
fmt = NULL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (NULL == fmt)
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
|
|
|
|
fh->ovfmt = fmt;
|
|
|
|
fh->fmt = fmt;
|
|
|
|
btv->init.ovfmt = fmt;
|
|
|
|
btv->init.fmt = fmt;
|
|
|
|
btv->fbuf.base = fbuf->base;
|
|
|
|
btv->fbuf.fmt.width = fbuf->width;
|
|
|
|
btv->fbuf.fmt.height = fbuf->height;
|
|
|
|
if (fbuf->bytesperline)
|
|
|
|
btv->fbuf.fmt.bytesperline = fbuf->bytesperline;
|
|
|
|
else
|
|
|
|
btv->fbuf.fmt.bytesperline = btv->fbuf.fmt.width*fbuf->depth/8;
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOCCAPTURE:
|
|
|
|
case VIDIOC_OVERLAY:
|
|
|
|
{
|
|
|
|
struct bttv_buffer *new;
|
|
|
|
int *on = arg;
|
|
|
|
|
|
|
|
if (*on) {
|
|
|
|
/* verify args */
|
|
|
|
if (NULL == btv->fbuf.base)
|
|
|
|
return -EINVAL;
|
|
|
|
if (!fh->ov.setup_ok) {
|
|
|
|
dprintk("bttv%d: overlay: !setup_ok\n",btv->c.nr);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!check_alloc_btres(btv,fh,RESOURCE_OVERLAY))
|
|
|
|
return -EBUSY;
|
|
|
|
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (*on) {
|
|
|
|
fh->ov.tvnorm = btv->tvnorm;
|
|
|
|
new = videobuf_alloc(sizeof(*new));
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
new->crop = btv->crop[!!fh->do_crop].rect;
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
|
|
|
|
} else {
|
|
|
|
new = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* switch over */
|
2005-11-09 00:37:43 -05:00
|
|
|
retval = bttv_switch_overlay(btv,fh,new);
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOCGMBUF:
|
|
|
|
{
|
|
|
|
struct video_mbuf *mbuf = arg;
|
|
|
|
unsigned int i;
|
|
|
|
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
retval = videobuf_mmap_setup(&fh->cap,gbuffers,gbufsize,
|
|
|
|
V4L2_MEMORY_MMAP);
|
|
|
|
if (retval < 0)
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
memset(mbuf,0,sizeof(*mbuf));
|
|
|
|
mbuf->frames = gbuffers;
|
|
|
|
mbuf->size = gbuffers * gbufsize;
|
|
|
|
for (i = 0; i < gbuffers; i++)
|
|
|
|
mbuf->offsets[i] = i * gbufsize;
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCMCAPTURE:
|
|
|
|
{
|
|
|
|
struct video_mmap *vm = arg;
|
|
|
|
struct bttv_buffer *buf;
|
|
|
|
enum v4l2_field field;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
__s32 height2;
|
|
|
|
int res;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
if (vm->frame >= VIDEO_MAX_FRAME)
|
|
|
|
return -EINVAL;
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
res = bttv_resource(fh);
|
|
|
|
if (!check_alloc_btres(btv, fh, res))
|
|
|
|
return -EBUSY;
|
|
|
|
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
retval = -EINVAL;
|
|
|
|
buf = (struct bttv_buffer *)fh->cap.bufs[vm->frame];
|
|
|
|
if (NULL == buf)
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
if (0 == buf->vb.baddr)
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
if (buf->vb.state == STATE_QUEUED ||
|
|
|
|
buf->vb.state == STATE_ACTIVE)
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
height2 = btv->crop[!!fh->do_crop].rect.height >> 1;
|
|
|
|
field = (vm->height > height2)
|
2005-04-16 18:20:36 -04:00
|
|
|
? V4L2_FIELD_INTERLACED
|
|
|
|
: V4L2_FIELD_BOTTOM;
|
2006-03-10 10:29:15 -05:00
|
|
|
retval = bttv_prepare_buffer(&fh->cap,btv,buf,
|
2005-04-16 18:20:36 -04:00
|
|
|
format_by_palette(vm->format),
|
|
|
|
vm->width,vm->height,field);
|
|
|
|
if (0 != retval)
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
spin_lock_irqsave(&btv->s_lock,flags);
|
|
|
|
buffer_queue(&fh->cap,&buf->vb);
|
|
|
|
spin_unlock_irqrestore(&btv->s_lock,flags);
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCSYNC:
|
|
|
|
{
|
|
|
|
int *frame = arg;
|
|
|
|
struct bttv_buffer *buf;
|
|
|
|
|
|
|
|
if (*frame >= VIDEO_MAX_FRAME)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
retval = -EINVAL;
|
|
|
|
buf = (struct bttv_buffer *)fh->cap.bufs[*frame];
|
|
|
|
if (NULL == buf)
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
retval = videobuf_waiton(&buf->vb,0,1);
|
|
|
|
if (0 != retval)
|
|
|
|
goto fh_unlock_and_return;
|
|
|
|
switch (buf->vb.state) {
|
|
|
|
case STATE_ERROR:
|
|
|
|
retval = -EIO;
|
|
|
|
/* fall through */
|
|
|
|
case STATE_DONE:
|
2006-03-10 10:29:15 -05:00
|
|
|
videobuf_dma_sync(&fh->cap,&buf->vb.dma);
|
|
|
|
bttv_dma_free(&fh->cap,btv,buf);
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
retval = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOCGVBIFMT:
|
|
|
|
if (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE) {
|
|
|
|
retval = bttv_switch_type(fh,V4L2_BUF_TYPE_VBI_CAPTURE);
|
|
|
|
if (0 != retval)
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
/* fall through */
|
2005-04-16 18:20:36 -04:00
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
case VIDIOCSVBIFMT:
|
|
|
|
return v4l_compat_translate_ioctl(inode, file, cmd,
|
|
|
|
arg, bttv_do_ioctl);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
case BTTV_VERSION:
|
|
|
|
case VIDIOCGFREQ:
|
|
|
|
case VIDIOCSFREQ:
|
|
|
|
case VIDIOCGTUNER:
|
|
|
|
case VIDIOCSTUNER:
|
|
|
|
case VIDIOCGCHAN:
|
|
|
|
case VIDIOCSCHAN:
|
2005-04-16 18:20:36 -04:00
|
|
|
case VIDIOCGAUDIO:
|
|
|
|
case VIDIOCSAUDIO:
|
|
|
|
return bttv_common_ioctls(btv,cmd,arg);
|
|
|
|
|
|
|
|
/* *** v4l2 *** ************************************************ */
|
|
|
|
case VIDIOC_QUERYCAP:
|
|
|
|
{
|
|
|
|
struct v4l2_capability *cap = arg;
|
|
|
|
|
|
|
|
if (0 == v4l2)
|
|
|
|
return -EINVAL;
|
2005-12-01 03:51:40 -05:00
|
|
|
memset(cap, 0, sizeof (*cap));
|
|
|
|
strlcpy(cap->driver, "bttv", sizeof (cap->driver));
|
|
|
|
strlcpy(cap->card, btv->video_dev->name, sizeof (cap->card));
|
|
|
|
snprintf(cap->bus_info, sizeof (cap->bus_info),
|
|
|
|
"PCI:%s", pci_name(btv->c.pci));
|
2005-04-16 18:20:36 -04:00
|
|
|
cap->version = BTTV_VERSION_CODE;
|
|
|
|
cap->capabilities =
|
|
|
|
V4L2_CAP_VIDEO_CAPTURE |
|
|
|
|
V4L2_CAP_VBI_CAPTURE |
|
|
|
|
V4L2_CAP_READWRITE |
|
|
|
|
V4L2_CAP_STREAMING;
|
2005-08-04 15:53:30 -04:00
|
|
|
if (no_overlay <= 0)
|
|
|
|
cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (bttv_tvcards[btv->c.type].tuner != UNSET &&
|
|
|
|
bttv_tvcards[btv->c.type].tuner != TUNER_ABSENT)
|
|
|
|
cap->capabilities |= V4L2_CAP_TUNER;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_ENUM_FMT:
|
|
|
|
{
|
|
|
|
struct v4l2_fmtdesc *f = arg;
|
|
|
|
enum v4l2_buf_type type;
|
|
|
|
unsigned int i;
|
|
|
|
int index;
|
|
|
|
|
|
|
|
type = f->type;
|
|
|
|
if (V4L2_BUF_TYPE_VBI_CAPTURE == type) {
|
|
|
|
/* vbi */
|
|
|
|
index = f->index;
|
|
|
|
if (0 != index)
|
|
|
|
return -EINVAL;
|
|
|
|
memset(f,0,sizeof(*f));
|
|
|
|
f->index = index;
|
|
|
|
f->type = type;
|
|
|
|
f->pixelformat = V4L2_PIX_FMT_GREY;
|
|
|
|
strcpy(f->description,"vbi data");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* video capture + overlay */
|
|
|
|
index = -1;
|
|
|
|
for (i = 0; i < BTTV_FORMATS; i++) {
|
|
|
|
if (bttv_formats[i].fourcc != -1)
|
|
|
|
index++;
|
|
|
|
if ((unsigned int)index == f->index)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (BTTV_FORMATS == i)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
switch (f->type) {
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
|
|
|
|
break;
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
|
|
|
|
if (!(bttv_formats[i].flags & FORMAT_FLAGS_PACKED))
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
memset(f,0,sizeof(*f));
|
|
|
|
f->index = index;
|
|
|
|
f->type = type;
|
|
|
|
f->pixelformat = bttv_formats[i].fourcc;
|
|
|
|
strlcpy(f->description,bttv_formats[i].name,sizeof(f->description));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_TRY_FMT:
|
|
|
|
{
|
|
|
|
struct v4l2_format *f = arg;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
return bttv_try_fmt(fh,btv,f, /* adjust_crop */ 0);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
case VIDIOC_G_FMT:
|
|
|
|
{
|
|
|
|
struct v4l2_format *f = arg;
|
|
|
|
return bttv_g_fmt(fh,f);
|
|
|
|
}
|
|
|
|
case VIDIOC_S_FMT:
|
|
|
|
{
|
|
|
|
struct v4l2_format *f = arg;
|
|
|
|
return bttv_s_fmt(fh,btv,f);
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_G_FBUF:
|
|
|
|
{
|
|
|
|
struct v4l2_framebuffer *fb = arg;
|
|
|
|
|
|
|
|
*fb = btv->fbuf;
|
|
|
|
fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING;
|
|
|
|
if (fh->ovfmt)
|
|
|
|
fb->fmt.pixelformat = fh->ovfmt->fourcc;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_S_FBUF:
|
|
|
|
{
|
|
|
|
struct v4l2_framebuffer *fb = arg;
|
|
|
|
const struct bttv_format *fmt;
|
|
|
|
|
|
|
|
if(!capable(CAP_SYS_ADMIN) &&
|
|
|
|
!capable(CAP_SYS_RAWIO))
|
|
|
|
return -EPERM;
|
|
|
|
|
|
|
|
/* check args */
|
|
|
|
fmt = format_by_fourcc(fb->fmt.pixelformat);
|
|
|
|
if (NULL == fmt)
|
|
|
|
return -EINVAL;
|
|
|
|
if (0 == (fmt->flags & FORMAT_FLAGS_PACKED))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
retval = -EINVAL;
|
|
|
|
if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) {
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
__s32 width = fb->fmt.width;
|
|
|
|
__s32 height = fb->fmt.height;
|
|
|
|
|
|
|
|
retval = limit_scaled_size(fh, &width, &height,
|
|
|
|
V4L2_FIELD_INTERLACED,
|
|
|
|
/* width_mask */ ~3,
|
|
|
|
/* width_bias */ 2,
|
|
|
|
/* adjust_size */ 0,
|
|
|
|
/* adjust_crop */ 0);
|
|
|
|
if (0 != retval)
|
|
|
|
return retval;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* ok, accept it */
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
btv->fbuf.base = fb->base;
|
|
|
|
btv->fbuf.fmt.width = fb->fmt.width;
|
|
|
|
btv->fbuf.fmt.height = fb->fmt.height;
|
|
|
|
if (0 != fb->fmt.bytesperline)
|
|
|
|
btv->fbuf.fmt.bytesperline = fb->fmt.bytesperline;
|
|
|
|
else
|
|
|
|
btv->fbuf.fmt.bytesperline = btv->fbuf.fmt.width*fmt->depth/8;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
fh->ovfmt = fmt;
|
|
|
|
btv->init.ovfmt = fmt;
|
|
|
|
if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) {
|
|
|
|
fh->ov.w.left = 0;
|
|
|
|
fh->ov.w.top = 0;
|
|
|
|
fh->ov.w.width = fb->fmt.width;
|
|
|
|
fh->ov.w.height = fb->fmt.height;
|
|
|
|
btv->init.ov.w.width = fb->fmt.width;
|
|
|
|
btv->init.ov.w.height = fb->fmt.height;
|
2005-12-12 03:37:28 -05:00
|
|
|
kfree(fh->ov.clips);
|
2005-04-16 18:20:36 -04:00
|
|
|
fh->ov.clips = NULL;
|
|
|
|
fh->ov.nclips = 0;
|
|
|
|
|
|
|
|
if (check_btres(fh, RESOURCE_OVERLAY)) {
|
|
|
|
struct bttv_buffer *new;
|
|
|
|
|
|
|
|
new = videobuf_alloc(sizeof(*new));
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
new->crop = btv->crop[!!fh->do_crop].rect;
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_overlay_risc(btv,&fh->ov,fh->ovfmt,new);
|
|
|
|
retval = bttv_switch_overlay(btv,fh,new);
|
|
|
|
}
|
|
|
|
}
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_REQBUFS:
|
|
|
|
return videobuf_reqbufs(bttv_queue(fh),arg);
|
|
|
|
|
|
|
|
case VIDIOC_QUERYBUF:
|
|
|
|
return videobuf_querybuf(bttv_queue(fh),arg);
|
|
|
|
|
|
|
|
case VIDIOC_QBUF:
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
{
|
|
|
|
int res = bttv_resource(fh);
|
|
|
|
|
|
|
|
if (!check_alloc_btres(btv, fh, res))
|
|
|
|
return -EBUSY;
|
2005-04-16 18:20:36 -04:00
|
|
|
return videobuf_qbuf(bttv_queue(fh),arg);
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
case VIDIOC_DQBUF:
|
|
|
|
return videobuf_dqbuf(bttv_queue(fh),arg,
|
|
|
|
file->f_flags & O_NONBLOCK);
|
|
|
|
|
|
|
|
case VIDIOC_STREAMON:
|
|
|
|
{
|
|
|
|
int res = bttv_resource(fh);
|
|
|
|
|
|
|
|
if (!check_alloc_btres(btv,fh,res))
|
|
|
|
return -EBUSY;
|
|
|
|
return videobuf_streamon(bttv_queue(fh));
|
|
|
|
}
|
|
|
|
case VIDIOC_STREAMOFF:
|
|
|
|
{
|
|
|
|
int res = bttv_resource(fh);
|
|
|
|
|
|
|
|
retval = videobuf_streamoff(bttv_queue(fh));
|
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
|
|
|
free_btres(btv,fh,res);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_QUERYCTRL:
|
|
|
|
{
|
|
|
|
struct v4l2_queryctrl *c = arg;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if ((c->id < V4L2_CID_BASE ||
|
|
|
|
c->id >= V4L2_CID_LASTP1) &&
|
|
|
|
(c->id < V4L2_CID_PRIVATE_BASE ||
|
|
|
|
c->id >= V4L2_CID_PRIVATE_LASTP1))
|
|
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < BTTV_CTLS; i++)
|
|
|
|
if (bttv_ctls[i].id == c->id)
|
|
|
|
break;
|
|
|
|
if (i == BTTV_CTLS) {
|
|
|
|
*c = no_ctl;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
*c = bttv_ctls[i];
|
2006-03-30 17:50:34 -05:00
|
|
|
if (btv->audio_hook && i >= 4 && i <= 8) {
|
2005-04-16 18:20:36 -04:00
|
|
|
struct video_audio va;
|
|
|
|
memset(&va,0,sizeof(va));
|
2006-03-30 17:50:34 -05:00
|
|
|
btv->audio_hook(btv,&va,0);
|
2005-04-16 18:20:36 -04:00
|
|
|
switch (bttv_ctls[i].id) {
|
|
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
|
|
if (!(va.flags & VIDEO_AUDIO_VOLUME))
|
|
|
|
*c = no_ctl;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_BALANCE:
|
|
|
|
if (!(va.flags & VIDEO_AUDIO_BALANCE))
|
|
|
|
*c = no_ctl;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_BASS:
|
|
|
|
if (!(va.flags & VIDEO_AUDIO_BASS))
|
|
|
|
*c = no_ctl;
|
|
|
|
break;
|
|
|
|
case V4L2_CID_AUDIO_TREBLE:
|
|
|
|
if (!(va.flags & VIDEO_AUDIO_TREBLE))
|
|
|
|
*c = no_ctl;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_G_CTRL:
|
|
|
|
return get_control(btv,arg);
|
|
|
|
case VIDIOC_S_CTRL:
|
|
|
|
return set_control(btv,arg);
|
|
|
|
case VIDIOC_G_PARM:
|
|
|
|
{
|
|
|
|
struct v4l2_streamparm *parm = arg;
|
|
|
|
struct v4l2_standard s;
|
|
|
|
if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
|
|
return -EINVAL;
|
|
|
|
memset(parm,0,sizeof(*parm));
|
|
|
|
v4l2_video_std_construct(&s, bttv_tvnorms[btv->tvnorm].v4l2_id,
|
|
|
|
bttv_tvnorms[btv->tvnorm].name);
|
|
|
|
parm->parm.capture.timeperframe = s.frameperiod;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
case VIDIOC_G_PRIORITY:
|
|
|
|
{
|
|
|
|
enum v4l2_priority *p = arg;
|
|
|
|
|
|
|
|
*p = v4l2_prio_max(&btv->prio);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_S_PRIORITY:
|
|
|
|
{
|
|
|
|
enum v4l2_priority *prio = arg;
|
|
|
|
|
|
|
|
return v4l2_prio_change(&btv->prio, &fh->prio, *prio);
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
case VIDIOC_CROPCAP:
|
|
|
|
{
|
|
|
|
struct v4l2_cropcap *cap = arg;
|
|
|
|
enum v4l2_buf_type type;
|
|
|
|
|
|
|
|
type = cap->type;
|
|
|
|
|
|
|
|
if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
|
|
|
|
type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
*cap = bttv_tvnorms[btv->tvnorm].cropcap;
|
|
|
|
cap->type = type;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_G_CROP:
|
|
|
|
{
|
|
|
|
struct v4l2_crop * crop = arg;
|
|
|
|
|
|
|
|
if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
|
|
|
|
crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* No fh->do_crop = 1; because btv->crop[1] may be
|
|
|
|
inconsistent with fh->width or fh->height and apps
|
|
|
|
do not expect a change here. */
|
|
|
|
|
|
|
|
crop->c = btv->crop[!!fh->do_crop].rect;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOC_S_CROP:
|
|
|
|
{
|
|
|
|
struct v4l2_crop *crop = arg;
|
|
|
|
const struct v4l2_rect *b;
|
|
|
|
struct bttv_crop c;
|
|
|
|
__s32 b_left;
|
|
|
|
__s32 b_top;
|
|
|
|
__s32 b_right;
|
|
|
|
__s32 b_bottom;
|
|
|
|
|
|
|
|
if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
|
|
|
|
crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
retval = v4l2_prio_check(&btv->prio,&fh->prio);
|
|
|
|
if (0 != retval)
|
|
|
|
return retval;
|
|
|
|
|
|
|
|
/* Make sure tvnorm, vbi_end and the current cropping
|
|
|
|
parameters remain consistent until we're done. Note
|
|
|
|
read() may change vbi_end in check_alloc_btres(). */
|
|
|
|
mutex_lock(&btv->lock);
|
|
|
|
|
|
|
|
retval = -EBUSY;
|
|
|
|
|
|
|
|
if (locked_btres(fh->btv, VIDEO_RESOURCES))
|
|
|
|
goto btv_unlock_and_return;
|
|
|
|
|
|
|
|
b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds;
|
|
|
|
|
|
|
|
b_left = b->left;
|
|
|
|
b_right = b_left + b->width;
|
|
|
|
b_bottom = b->top + b->height;
|
|
|
|
|
|
|
|
b_top = max(b->top, btv->vbi_end);
|
|
|
|
if (b_top + 32 >= b_bottom)
|
|
|
|
goto btv_unlock_and_return;
|
|
|
|
|
|
|
|
/* Min. scaled size 48 x 32. */
|
|
|
|
c.rect.left = clamp(crop->c.left, b_left, b_right - 48);
|
|
|
|
c.rect.left = min(c.rect.left, (__s32) MAX_HDELAY);
|
|
|
|
|
|
|
|
c.rect.width = clamp(crop->c.width,
|
|
|
|
48, b_right - c.rect.left);
|
|
|
|
|
|
|
|
c.rect.top = clamp(crop->c.top, b_top, b_bottom - 32);
|
|
|
|
/* Top and height must be a multiple of two. */
|
|
|
|
c.rect.top = (c.rect.top + 1) & ~1;
|
|
|
|
|
|
|
|
c.rect.height = clamp(crop->c.height,
|
|
|
|
32, b_bottom - c.rect.top);
|
|
|
|
c.rect.height = (c.rect.height + 1) & ~1;
|
|
|
|
|
|
|
|
bttv_crop_calc_limits(&c);
|
|
|
|
|
|
|
|
btv->crop[1] = c;
|
|
|
|
|
|
|
|
mutex_unlock(&btv->lock);
|
|
|
|
|
|
|
|
fh->do_crop = 1;
|
|
|
|
|
|
|
|
mutex_lock(&fh->cap.lock);
|
|
|
|
|
|
|
|
if (fh->width < c.min_scaled_width) {
|
|
|
|
fh->width = c.min_scaled_width;
|
|
|
|
btv->init.width = c.min_scaled_width;
|
|
|
|
} else if (fh->width > c.max_scaled_width) {
|
|
|
|
fh->width = c.max_scaled_width;
|
|
|
|
btv->init.width = c.max_scaled_width;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (fh->height < c.min_scaled_height) {
|
|
|
|
fh->height = c.min_scaled_height;
|
|
|
|
btv->init.height = c.min_scaled_height;
|
|
|
|
} else if (fh->height > c.max_scaled_height) {
|
|
|
|
fh->height = c.max_scaled_height;
|
|
|
|
btv->init.height = c.max_scaled_height;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&fh->cap.lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
case VIDIOC_ENUMSTD:
|
|
|
|
case VIDIOC_G_STD:
|
|
|
|
case VIDIOC_S_STD:
|
|
|
|
case VIDIOC_ENUMINPUT:
|
|
|
|
case VIDIOC_G_INPUT:
|
|
|
|
case VIDIOC_S_INPUT:
|
|
|
|
case VIDIOC_G_TUNER:
|
|
|
|
case VIDIOC_S_TUNER:
|
|
|
|
case VIDIOC_G_FREQUENCY:
|
|
|
|
case VIDIOC_S_FREQUENCY:
|
2005-11-09 00:37:42 -05:00
|
|
|
case VIDIOC_LOG_STATUS:
|
2005-04-16 18:20:36 -04:00
|
|
|
return bttv_common_ioctls(btv,cmd,arg);
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -ENOIOCTLCMD;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fh_unlock_and_return:
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return retval;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
|
|
|
|
btv_unlock_and_return:
|
|
|
|
mutex_unlock(&btv->lock);
|
|
|
|
return retval;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_ioctl(struct inode *inode, struct file *file,
|
|
|
|
unsigned int cmd, unsigned long arg)
|
|
|
|
{
|
|
|
|
struct bttv_fh *fh = file->private_data;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case BTTV_VBISIZE:
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
{
|
|
|
|
const struct bttv_tvnorm *tvnorm;
|
|
|
|
|
|
|
|
tvnorm = fh->vbi_fmt.tvnorm;
|
|
|
|
|
|
|
|
if (fh->vbi_fmt.fmt.start[0] != tvnorm->vbistart[0] ||
|
|
|
|
fh->vbi_fmt.fmt.start[1] != tvnorm->vbistart[1] ||
|
|
|
|
fh->vbi_fmt.fmt.count[0] != fh->vbi_fmt.fmt.count[1]) {
|
|
|
|
/* BTTV_VBISIZE cannot express these parameters,
|
|
|
|
however open() resets the paramters to defaults
|
|
|
|
and apps shouldn't call BTTV_VBISIZE after
|
|
|
|
VIDIOC_S_FMT. */
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_switch_type(fh,V4L2_BUF_TYPE_VBI_CAPTURE);
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
return (fh->vbi_fmt.fmt.count[0] * 2
|
|
|
|
* fh->vbi_fmt.fmt.samples_per_line);
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
default:
|
|
|
|
return video_usercopy(inode, file, cmd, arg, bttv_do_ioctl);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t bttv_read(struct file *file, char __user *data,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct bttv_fh *fh = file->private_data;
|
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
if (fh->btv->errors)
|
|
|
|
bttv_reinit_bt848(fh->btv);
|
|
|
|
dprintk("bttv%d: read count=%d type=%s\n",
|
|
|
|
fh->btv->c.nr,(int)count,v4l2_type_names[fh->type]);
|
|
|
|
|
|
|
|
switch (fh->type) {
|
|
|
|
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
if (!check_alloc_btres(fh->btv, fh, RESOURCE_VIDEO_READ)) {
|
|
|
|
/* VIDEO_READ in use by another fh,
|
|
|
|
or VIDEO_STREAM by any fh. */
|
2005-04-16 18:20:36 -04:00
|
|
|
return -EBUSY;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
retval = videobuf_read_one(&fh->cap, data, count, ppos,
|
|
|
|
file->f_flags & O_NONBLOCK);
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
free_btres(fh->btv, fh, RESOURCE_VIDEO_READ);
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
case V4L2_BUF_TYPE_VBI_CAPTURE:
|
|
|
|
if (!check_alloc_btres(fh->btv,fh,RESOURCE_VBI))
|
|
|
|
return -EBUSY;
|
|
|
|
retval = videobuf_read_stream(&fh->vbi, data, count, ppos, 1,
|
|
|
|
file->f_flags & O_NONBLOCK);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned int bttv_poll(struct file *file, poll_table *wait)
|
|
|
|
{
|
|
|
|
struct bttv_fh *fh = file->private_data;
|
|
|
|
struct bttv_buffer *buf;
|
|
|
|
enum v4l2_field field;
|
|
|
|
|
|
|
|
if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) {
|
|
|
|
if (!check_alloc_btres(fh->btv,fh,RESOURCE_VBI))
|
|
|
|
return POLLERR;
|
|
|
|
return videobuf_poll_stream(file, &fh->vbi, wait);
|
|
|
|
}
|
|
|
|
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
if (check_btres(fh,RESOURCE_VIDEO_STREAM)) {
|
2005-04-16 18:20:36 -04:00
|
|
|
/* streaming capture */
|
|
|
|
if (list_empty(&fh->cap.stream))
|
|
|
|
return POLLERR;
|
|
|
|
buf = list_entry(fh->cap.stream.next,struct bttv_buffer,vb.stream);
|
|
|
|
} else {
|
|
|
|
/* read() capture */
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_lock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (NULL == fh->cap.read_buf) {
|
|
|
|
/* need to capture a new frame */
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
if (locked_btres(fh->btv,RESOURCE_VIDEO_STREAM)) {
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return POLLERR;
|
|
|
|
}
|
|
|
|
fh->cap.read_buf = videobuf_alloc(fh->cap.msize);
|
|
|
|
if (NULL == fh->cap.read_buf) {
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return POLLERR;
|
|
|
|
}
|
|
|
|
fh->cap.read_buf->memory = V4L2_MEMORY_USERPTR;
|
|
|
|
field = videobuf_next_field(&fh->cap);
|
|
|
|
if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,field)) {
|
2005-12-01 03:51:32 -05:00
|
|
|
kfree (fh->cap.read_buf);
|
|
|
|
fh->cap.read_buf = NULL;
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
return POLLERR;
|
|
|
|
}
|
|
|
|
fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf);
|
|
|
|
fh->cap.read_off = 0;
|
|
|
|
}
|
2006-02-07 03:49:14 -05:00
|
|
|
mutex_unlock(&fh->cap.lock);
|
2005-04-16 18:20:36 -04:00
|
|
|
buf = (struct bttv_buffer*)fh->cap.read_buf;
|
|
|
|
}
|
|
|
|
|
|
|
|
poll_wait(file, &buf->vb.done, wait);
|
|
|
|
if (buf->vb.state == STATE_DONE ||
|
|
|
|
buf->vb.state == STATE_ERROR)
|
|
|
|
return POLLIN|POLLRDNORM;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
int minor = iminor(inode);
|
|
|
|
struct bttv *btv = NULL;
|
|
|
|
struct bttv_fh *fh;
|
|
|
|
enum v4l2_buf_type type = 0;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
dprintk(KERN_DEBUG "bttv: open minor=%d\n",minor);
|
|
|
|
|
|
|
|
for (i = 0; i < bttv_num; i++) {
|
|
|
|
if (bttvs[i].video_dev &&
|
|
|
|
bttvs[i].video_dev->minor == minor) {
|
|
|
|
btv = &bttvs[i];
|
|
|
|
type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (bttvs[i].vbi_dev &&
|
|
|
|
bttvs[i].vbi_dev->minor == minor) {
|
|
|
|
btv = &bttvs[i];
|
|
|
|
type = V4L2_BUF_TYPE_VBI_CAPTURE;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (NULL == btv)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
dprintk(KERN_DEBUG "bttv%d: open called (type=%s)\n",
|
|
|
|
btv->c.nr,v4l2_type_names[type]);
|
|
|
|
|
|
|
|
/* allocate per filehandle data */
|
|
|
|
fh = kmalloc(sizeof(*fh),GFP_KERNEL);
|
|
|
|
if (NULL == fh)
|
|
|
|
return -ENOMEM;
|
|
|
|
file->private_data = fh;
|
|
|
|
*fh = btv->init;
|
|
|
|
fh->type = type;
|
|
|
|
fh->ov.setup_ok = 0;
|
|
|
|
v4l2_prio_open(&btv->prio,&fh->prio);
|
|
|
|
|
|
|
|
videobuf_queue_init(&fh->cap, &bttv_video_qops,
|
|
|
|
btv->c.pci, &btv->s_lock,
|
|
|
|
V4L2_BUF_TYPE_VIDEO_CAPTURE,
|
|
|
|
V4L2_FIELD_INTERLACED,
|
|
|
|
sizeof(struct bttv_buffer),
|
|
|
|
fh);
|
|
|
|
videobuf_queue_init(&fh->vbi, &bttv_vbi_qops,
|
|
|
|
btv->c.pci, &btv->s_lock,
|
|
|
|
V4L2_BUF_TYPE_VBI_CAPTURE,
|
|
|
|
V4L2_FIELD_SEQ_TB,
|
|
|
|
sizeof(struct bttv_buffer),
|
|
|
|
fh);
|
|
|
|
i2c_vidiocschan(btv);
|
|
|
|
|
|
|
|
btv->users++;
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
|
|
|
|
/* The V4L2 spec requires one global set of cropping parameters
|
|
|
|
which only change on request. These are stored in btv->crop[1].
|
|
|
|
However for compatibility with V4L apps and cropping unaware
|
|
|
|
V4L2 apps we now reset the cropping parameters as seen through
|
|
|
|
this fh, which is to say VIDIOC_G_CROP and scaling limit checks
|
|
|
|
will use btv->crop[0], the default cropping parameters for the
|
|
|
|
current video standard, and VIDIOC_S_FMT will not implicitely
|
|
|
|
change the cropping parameters until VIDIOC_S_CROP has been
|
|
|
|
called. */
|
|
|
|
fh->do_crop = !reset_crop; /* module parameter */
|
|
|
|
|
|
|
|
/* Likewise there should be one global set of VBI capture
|
|
|
|
parameters, but for compatibility with V4L apps and earlier
|
|
|
|
driver versions each fh has its own parameters. */
|
|
|
|
bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm);
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_field_count(btv);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct bttv_fh *fh = file->private_data;
|
|
|
|
struct bttv *btv = fh->btv;
|
|
|
|
|
|
|
|
/* turn off overlay */
|
|
|
|
if (check_btres(fh, RESOURCE_OVERLAY))
|
|
|
|
bttv_switch_overlay(btv,fh,NULL);
|
|
|
|
|
|
|
|
/* stop video capture */
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
if (check_btres(fh, RESOURCE_VIDEO_STREAM)) {
|
2005-04-16 18:20:36 -04:00
|
|
|
videobuf_streamoff(&fh->cap);
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
free_btres(btv,fh,RESOURCE_VIDEO_STREAM);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
if (fh->cap.read_buf) {
|
|
|
|
buffer_release(&fh->cap,fh->cap.read_buf);
|
|
|
|
kfree(fh->cap.read_buf);
|
|
|
|
}
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
if (check_btres(fh, RESOURCE_VIDEO_READ)) {
|
|
|
|
free_btres(btv, fh, RESOURCE_VIDEO_READ);
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* stop vbi capture */
|
|
|
|
if (check_btres(fh, RESOURCE_VBI)) {
|
|
|
|
if (fh->vbi.streaming)
|
|
|
|
videobuf_streamoff(&fh->vbi);
|
|
|
|
if (fh->vbi.reading)
|
|
|
|
videobuf_read_stop(&fh->vbi);
|
|
|
|
free_btres(btv,fh,RESOURCE_VBI);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* free stuff */
|
|
|
|
videobuf_mmap_free(&fh->cap);
|
|
|
|
videobuf_mmap_free(&fh->vbi);
|
|
|
|
v4l2_prio_close(&btv->prio,&fh->prio);
|
|
|
|
file->private_data = NULL;
|
|
|
|
kfree(fh);
|
|
|
|
|
|
|
|
btv->users--;
|
|
|
|
bttv_field_count(btv);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
bttv_mmap(struct file *file, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
struct bttv_fh *fh = file->private_data;
|
|
|
|
|
|
|
|
dprintk("bttv%d: mmap type=%s 0x%lx+%ld\n",
|
|
|
|
fh->btv->c.nr, v4l2_type_names[fh->type],
|
|
|
|
vma->vm_start, vma->vm_end - vma->vm_start);
|
|
|
|
return videobuf_mmap_mapper(bttv_queue(fh),vma);
|
|
|
|
}
|
|
|
|
|
2007-02-12 03:55:33 -05:00
|
|
|
static const struct file_operations bttv_fops =
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.open = bttv_open,
|
|
|
|
.release = bttv_release,
|
|
|
|
.ioctl = bttv_ioctl,
|
2006-01-09 12:24:57 -05:00
|
|
|
.compat_ioctl = v4l_compat_ioctl32,
|
2005-04-16 18:20:36 -04:00
|
|
|
.llseek = no_llseek,
|
|
|
|
.read = bttv_read,
|
|
|
|
.mmap = bttv_mmap,
|
|
|
|
.poll = bttv_poll,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct video_device bttv_video_template =
|
|
|
|
{
|
|
|
|
.name = "UNSET",
|
2005-08-04 15:53:30 -04:00
|
|
|
.type = VID_TYPE_CAPTURE|VID_TYPE_TUNER|
|
2005-11-09 00:37:43 -05:00
|
|
|
VID_TYPE_CLIPPING|VID_TYPE_SCALES,
|
2005-04-16 18:20:36 -04:00
|
|
|
.hardware = VID_HARDWARE_BT848,
|
|
|
|
.fops = &bttv_fops,
|
|
|
|
.minor = -1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct video_device bttv_vbi_template =
|
|
|
|
{
|
|
|
|
.name = "bt848/878 vbi",
|
|
|
|
.type = VID_TYPE_TUNER|VID_TYPE_TELETEXT,
|
|
|
|
.hardware = VID_HARDWARE_BT848,
|
|
|
|
.fops = &bttv_fops,
|
|
|
|
.minor = -1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* radio interface */
|
|
|
|
|
|
|
|
static int radio_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
int minor = iminor(inode);
|
|
|
|
struct bttv *btv = NULL;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
dprintk("bttv: open minor=%d\n",minor);
|
|
|
|
|
|
|
|
for (i = 0; i < bttv_num; i++) {
|
|
|
|
if (bttvs[i].radio_dev->minor == minor) {
|
|
|
|
btv = &bttvs[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (NULL == btv)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
dprintk("bttv%d: open called (radio)\n",btv->c.nr);
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_lock(&btv->lock);
|
2005-09-09 16:03:39 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
btv->radio_user++;
|
2005-09-09 16:03:39 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
file->private_data = btv;
|
|
|
|
|
2006-03-18 19:31:00 -05:00
|
|
|
bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
|
|
|
|
audio_input(btv,TVAUDIO_INPUT_RADIO);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_unlock(&btv->lock);
|
2005-11-09 00:37:43 -05:00
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
2005-09-09 16:03:39 -04:00
|
|
|
struct bttv *btv = file->private_data;
|
|
|
|
struct rds_command cmd;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
btv->radio_user--;
|
2005-09-09 16:03:39 -04:00
|
|
|
|
|
|
|
bttv_call_i2c_clients(btv, RDS_CMD_CLOSE, &cmd);
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_do_ioctl(struct inode *inode, struct file *file,
|
|
|
|
unsigned int cmd, void *arg)
|
|
|
|
{
|
|
|
|
struct bttv *btv = file->private_data;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case VIDIOCGCAP:
|
|
|
|
{
|
2005-11-09 00:37:43 -05:00
|
|
|
struct video_capability *cap = arg;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
memset(cap,0,sizeof(*cap));
|
2005-11-09 00:37:43 -05:00
|
|
|
strcpy(cap->name,btv->radio_dev->name);
|
|
|
|
cap->type = VID_TYPE_TUNER;
|
2005-04-16 18:20:36 -04:00
|
|
|
cap->channels = 1;
|
|
|
|
cap->audios = 1;
|
2005-11-09 00:37:43 -05:00
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
case VIDIOCGTUNER:
|
|
|
|
{
|
|
|
|
struct video_tuner *v = arg;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
if(v->tuner)
|
|
|
|
return -EINVAL;
|
2005-04-16 18:20:36 -04:00
|
|
|
memset(v,0,sizeof(*v));
|
2005-11-09 00:37:43 -05:00
|
|
|
strcpy(v->name, "Radio");
|
|
|
|
bttv_call_i2c_clients(btv,cmd,v);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
case VIDIOCSTUNER:
|
2005-04-16 18:20:36 -04:00
|
|
|
/* nothing to do */
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
case BTTV_VERSION:
|
2005-11-09 00:37:43 -05:00
|
|
|
case VIDIOCGFREQ:
|
|
|
|
case VIDIOCSFREQ:
|
2005-04-16 18:20:36 -04:00
|
|
|
case VIDIOCGAUDIO:
|
|
|
|
case VIDIOCSAUDIO:
|
2006-01-09 15:21:37 -05:00
|
|
|
case VIDIOC_LOG_STATUS:
|
2005-04-16 18:20:36 -04:00
|
|
|
return bttv_common_ioctls(btv,cmd,arg);
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -ENOIOCTLCMD;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_ioctl(struct inode *inode, struct file *file,
|
|
|
|
unsigned int cmd, unsigned long arg)
|
|
|
|
{
|
|
|
|
return video_usercopy(inode, file, cmd, arg, radio_do_ioctl);
|
|
|
|
}
|
|
|
|
|
2005-09-09 16:03:39 -04:00
|
|
|
static ssize_t radio_read(struct file *file, char __user *data,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct bttv *btv = file->private_data;
|
|
|
|
struct rds_command cmd;
|
|
|
|
cmd.block_count = count/3;
|
|
|
|
cmd.buffer = data;
|
|
|
|
cmd.instance = file;
|
|
|
|
cmd.result = -ENODEV;
|
|
|
|
|
|
|
|
bttv_call_i2c_clients(btv, RDS_CMD_READ, &cmd);
|
|
|
|
|
|
|
|
return cmd.result;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned int radio_poll(struct file *file, poll_table *wait)
|
|
|
|
{
|
|
|
|
struct bttv *btv = file->private_data;
|
|
|
|
struct rds_command cmd;
|
|
|
|
cmd.instance = file;
|
|
|
|
cmd.event_list = wait;
|
|
|
|
cmd.result = -ENODEV;
|
|
|
|
bttv_call_i2c_clients(btv, RDS_CMD_POLL, &cmd);
|
|
|
|
|
|
|
|
return cmd.result;
|
|
|
|
}
|
|
|
|
|
2007-02-12 03:55:33 -05:00
|
|
|
static const struct file_operations radio_fops =
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.open = radio_open,
|
2005-09-09 16:03:39 -04:00
|
|
|
.read = radio_read,
|
2005-04-16 18:20:36 -04:00
|
|
|
.release = radio_release,
|
|
|
|
.ioctl = radio_ioctl,
|
|
|
|
.llseek = no_llseek,
|
2005-09-09 16:03:39 -04:00
|
|
|
.poll = radio_poll,
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct video_device radio_template =
|
|
|
|
{
|
|
|
|
.name = "bt848/878 radio",
|
|
|
|
.type = VID_TYPE_TUNER,
|
|
|
|
.hardware = VID_HARDWARE_BT848,
|
|
|
|
.fops = &radio_fops,
|
|
|
|
.minor = -1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* some debug code */
|
|
|
|
|
2005-05-01 11:59:29 -04:00
|
|
|
static int bttv_risc_decode(u32 risc)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
static char *instr[16] = {
|
|
|
|
[ BT848_RISC_WRITE >> 28 ] = "write",
|
|
|
|
[ BT848_RISC_SKIP >> 28 ] = "skip",
|
|
|
|
[ BT848_RISC_WRITEC >> 28 ] = "writec",
|
|
|
|
[ BT848_RISC_JUMP >> 28 ] = "jump",
|
|
|
|
[ BT848_RISC_SYNC >> 28 ] = "sync",
|
|
|
|
[ BT848_RISC_WRITE123 >> 28 ] = "write123",
|
|
|
|
[ BT848_RISC_SKIP123 >> 28 ] = "skip123",
|
|
|
|
[ BT848_RISC_WRITE1S23 >> 28 ] = "write1s23",
|
|
|
|
};
|
|
|
|
static int incr[16] = {
|
|
|
|
[ BT848_RISC_WRITE >> 28 ] = 2,
|
|
|
|
[ BT848_RISC_JUMP >> 28 ] = 2,
|
|
|
|
[ BT848_RISC_SYNC >> 28 ] = 2,
|
|
|
|
[ BT848_RISC_WRITE123 >> 28 ] = 5,
|
|
|
|
[ BT848_RISC_SKIP123 >> 28 ] = 2,
|
|
|
|
[ BT848_RISC_WRITE1S23 >> 28 ] = 3,
|
|
|
|
};
|
|
|
|
static char *bits[] = {
|
|
|
|
"be0", "be1", "be2", "be3/resync",
|
|
|
|
"set0", "set1", "set2", "set3",
|
|
|
|
"clr0", "clr1", "clr2", "clr3",
|
|
|
|
"irq", "res", "eol", "sol",
|
|
|
|
};
|
|
|
|
int i;
|
|
|
|
|
|
|
|
printk("0x%08x [ %s", risc,
|
|
|
|
instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
|
|
|
|
for (i = ARRAY_SIZE(bits)-1; i >= 0; i--)
|
|
|
|
if (risc & (1 << (i + 12)))
|
|
|
|
printk(" %s",bits[i]);
|
|
|
|
printk(" count=%d ]\n", risc & 0xfff);
|
|
|
|
return incr[risc >> 28] ? incr[risc >> 28] : 1;
|
|
|
|
}
|
|
|
|
|
2005-05-01 11:59:29 -04:00
|
|
|
static void bttv_risc_disasm(struct bttv *btv,
|
|
|
|
struct btcx_riscmem *risc)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
unsigned int i,j,n;
|
|
|
|
|
|
|
|
printk("%s: risc disasm: %p [dma=0x%08lx]\n",
|
|
|
|
btv->c.name, risc->cpu, (unsigned long)risc->dma);
|
|
|
|
for (i = 0; i < (risc->size >> 2); i += n) {
|
|
|
|
printk("%s: 0x%lx: ", btv->c.name,
|
|
|
|
(unsigned long)(risc->dma + (i<<2)));
|
|
|
|
n = bttv_risc_decode(risc->cpu[i]);
|
|
|
|
for (j = 1; j < n; j++)
|
|
|
|
printk("%s: 0x%lx: 0x%08x [ arg #%d ]\n",
|
|
|
|
btv->c.name, (unsigned long)(risc->dma + ((i+j)<<2)),
|
|
|
|
risc->cpu[i+j], j);
|
|
|
|
if (0 == risc->cpu[i])
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bttv_print_riscaddr(struct bttv *btv)
|
|
|
|
{
|
|
|
|
printk(" main: %08Lx\n",
|
|
|
|
(unsigned long long)btv->main.dma);
|
|
|
|
printk(" vbi : o=%08Lx e=%08Lx\n",
|
|
|
|
btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0,
|
|
|
|
btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0);
|
|
|
|
printk(" cap : o=%08Lx e=%08Lx\n",
|
|
|
|
btv->curr.top ? (unsigned long long)btv->curr.top->top.dma : 0,
|
|
|
|
btv->curr.bottom ? (unsigned long long)btv->curr.bottom->bottom.dma : 0);
|
|
|
|
printk(" scr : o=%08Lx e=%08Lx\n",
|
|
|
|
btv->screen ? (unsigned long long)btv->screen->top.dma : 0,
|
|
|
|
btv->screen ? (unsigned long long)btv->screen->bottom.dma : 0);
|
|
|
|
bttv_risc_disasm(btv, &btv->main);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* irq handler */
|
|
|
|
|
|
|
|
static char *irq_name[] = {
|
|
|
|
"FMTCHG", // format change detected (525 vs. 625)
|
|
|
|
"VSYNC", // vertical sync (new field)
|
|
|
|
"HSYNC", // horizontal sync
|
|
|
|
"OFLOW", // chroma/luma AGC overflow
|
|
|
|
"HLOCK", // horizontal lock changed
|
|
|
|
"VPRES", // video presence changed
|
|
|
|
"6", "7",
|
|
|
|
"I2CDONE", // hw irc operation finished
|
|
|
|
"GPINT", // gpio port triggered irq
|
|
|
|
"10",
|
|
|
|
"RISCI", // risc instruction triggered irq
|
|
|
|
"FBUS", // pixel data fifo dropped data (high pci bus latencies)
|
|
|
|
"FTRGT", // pixel data fifo overrun
|
|
|
|
"FDSR", // fifo data stream resyncronisation
|
|
|
|
"PPERR", // parity error (data transfer)
|
|
|
|
"RIPERR", // parity error (read risc instructions)
|
|
|
|
"PABORT", // pci abort
|
|
|
|
"OCERR", // risc instruction error
|
|
|
|
"SCERR", // syncronisation error
|
|
|
|
};
|
|
|
|
|
|
|
|
static void bttv_print_irqbits(u32 print, u32 mark)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
printk("bits:");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(irq_name); i++) {
|
|
|
|
if (print & (1 << i))
|
|
|
|
printk(" %s",irq_name[i]);
|
|
|
|
if (mark & (1 << i))
|
|
|
|
printk("*");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc)
|
|
|
|
{
|
|
|
|
printk("bttv%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n",
|
|
|
|
btv->c.nr,
|
|
|
|
(unsigned long)btv->main.dma,
|
|
|
|
(unsigned long)btv->main.cpu[RISC_SLOT_O_VBI+1],
|
|
|
|
(unsigned long)btv->main.cpu[RISC_SLOT_O_FIELD+1],
|
|
|
|
(unsigned long)rc);
|
|
|
|
|
|
|
|
if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) {
|
|
|
|
printk("bttv%d: Oh, there (temporarely?) is no input signal. "
|
|
|
|
"Ok, then this is harmless, don't worry ;)\n",
|
|
|
|
btv->c.nr);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
printk("bttv%d: Uhm. Looks like we have unusual high IRQ latencies.\n",
|
|
|
|
btv->c.nr);
|
|
|
|
printk("bttv%d: Lets try to catch the culpit red-handed ...\n",
|
|
|
|
btv->c.nr);
|
|
|
|
dump_stack();
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set)
|
|
|
|
{
|
|
|
|
struct bttv_buffer *item;
|
|
|
|
|
|
|
|
memset(set,0,sizeof(*set));
|
|
|
|
|
|
|
|
/* capture request ? */
|
|
|
|
if (!list_empty(&btv->capture)) {
|
|
|
|
set->frame_irq = 1;
|
|
|
|
item = list_entry(btv->capture.next, struct bttv_buffer, vb.queue);
|
|
|
|
if (V4L2_FIELD_HAS_TOP(item->vb.field))
|
|
|
|
set->top = item;
|
|
|
|
if (V4L2_FIELD_HAS_BOTTOM(item->vb.field))
|
|
|
|
set->bottom = item;
|
|
|
|
|
|
|
|
/* capture request for other field ? */
|
|
|
|
if (!V4L2_FIELD_HAS_BOTH(item->vb.field) &&
|
|
|
|
(item->vb.queue.next != &btv->capture)) {
|
|
|
|
item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue);
|
|
|
|
if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) {
|
|
|
|
if (NULL == set->top &&
|
|
|
|
V4L2_FIELD_TOP == item->vb.field) {
|
|
|
|
set->top = item;
|
|
|
|
}
|
|
|
|
if (NULL == set->bottom &&
|
|
|
|
V4L2_FIELD_BOTTOM == item->vb.field) {
|
|
|
|
set->bottom = item;
|
|
|
|
}
|
|
|
|
if (NULL != set->top && NULL != set->bottom)
|
|
|
|
set->top_irq = 2;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* screen overlay ? */
|
|
|
|
if (NULL != btv->screen) {
|
|
|
|
if (V4L2_FIELD_HAS_BOTH(btv->screen->vb.field)) {
|
|
|
|
if (NULL == set->top && NULL == set->bottom) {
|
|
|
|
set->top = btv->screen;
|
|
|
|
set->bottom = btv->screen;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (V4L2_FIELD_TOP == btv->screen->vb.field &&
|
|
|
|
NULL == set->top) {
|
|
|
|
set->top = btv->screen;
|
|
|
|
}
|
|
|
|
if (V4L2_FIELD_BOTTOM == btv->screen->vb.field &&
|
|
|
|
NULL == set->bottom) {
|
|
|
|
set->bottom = btv->screen;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
dprintk("bttv%d: next set: top=%p bottom=%p [screen=%p,irq=%d,%d]\n",
|
|
|
|
btv->c.nr,set->top, set->bottom,
|
|
|
|
btv->screen,set->frame_irq,set->top_irq);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bttv_irq_wakeup_video(struct bttv *btv, struct bttv_buffer_set *wakeup,
|
|
|
|
struct bttv_buffer_set *curr, unsigned int state)
|
|
|
|
{
|
|
|
|
struct timeval ts;
|
|
|
|
|
|
|
|
do_gettimeofday(&ts);
|
|
|
|
|
|
|
|
if (wakeup->top == wakeup->bottom) {
|
|
|
|
if (NULL != wakeup->top && curr->top != wakeup->top) {
|
|
|
|
if (irq_debug > 1)
|
|
|
|
printk("bttv%d: wakeup: both=%p\n",btv->c.nr,wakeup->top);
|
|
|
|
wakeup->top->vb.ts = ts;
|
|
|
|
wakeup->top->vb.field_count = btv->field_count;
|
|
|
|
wakeup->top->vb.state = state;
|
|
|
|
wake_up(&wakeup->top->vb.done);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (NULL != wakeup->top && curr->top != wakeup->top) {
|
|
|
|
if (irq_debug > 1)
|
|
|
|
printk("bttv%d: wakeup: top=%p\n",btv->c.nr,wakeup->top);
|
|
|
|
wakeup->top->vb.ts = ts;
|
|
|
|
wakeup->top->vb.field_count = btv->field_count;
|
|
|
|
wakeup->top->vb.state = state;
|
|
|
|
wake_up(&wakeup->top->vb.done);
|
|
|
|
}
|
|
|
|
if (NULL != wakeup->bottom && curr->bottom != wakeup->bottom) {
|
|
|
|
if (irq_debug > 1)
|
|
|
|
printk("bttv%d: wakeup: bottom=%p\n",btv->c.nr,wakeup->bottom);
|
|
|
|
wakeup->bottom->vb.ts = ts;
|
|
|
|
wakeup->bottom->vb.field_count = btv->field_count;
|
|
|
|
wakeup->bottom->vb.state = state;
|
|
|
|
wake_up(&wakeup->bottom->vb.done);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bttv_irq_wakeup_vbi(struct bttv *btv, struct bttv_buffer *wakeup,
|
|
|
|
unsigned int state)
|
|
|
|
{
|
|
|
|
struct timeval ts;
|
|
|
|
|
|
|
|
if (NULL == wakeup)
|
|
|
|
return;
|
|
|
|
|
|
|
|
do_gettimeofday(&ts);
|
|
|
|
wakeup->vb.ts = ts;
|
|
|
|
wakeup->vb.field_count = btv->field_count;
|
|
|
|
wakeup->vb.state = state;
|
|
|
|
wake_up(&wakeup->vb.done);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bttv_irq_timeout(unsigned long data)
|
|
|
|
{
|
|
|
|
struct bttv *btv = (struct bttv *)data;
|
|
|
|
struct bttv_buffer_set old,new;
|
|
|
|
struct bttv_buffer *ovbi;
|
|
|
|
struct bttv_buffer *item;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if (bttv_verbose) {
|
|
|
|
printk(KERN_INFO "bttv%d: timeout: drop=%d irq=%d/%d, risc=%08x, ",
|
|
|
|
btv->c.nr, btv->framedrop, btv->irq_me, btv->irq_total,
|
|
|
|
btread(BT848_RISC_COUNT));
|
|
|
|
bttv_print_irqbits(btread(BT848_INT_STAT),0);
|
|
|
|
printk("\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&btv->s_lock,flags);
|
|
|
|
|
|
|
|
/* deactivate stuff */
|
|
|
|
memset(&new,0,sizeof(new));
|
|
|
|
old = btv->curr;
|
|
|
|
ovbi = btv->cvbi;
|
|
|
|
btv->curr = new;
|
|
|
|
btv->cvbi = NULL;
|
|
|
|
btv->loop_irq = 0;
|
|
|
|
bttv_buffer_activate_video(btv, &new);
|
|
|
|
bttv_buffer_activate_vbi(btv, NULL);
|
|
|
|
bttv_set_dma(btv, 0);
|
|
|
|
|
|
|
|
/* wake up */
|
|
|
|
bttv_irq_wakeup_video(btv, &old, &new, STATE_ERROR);
|
|
|
|
bttv_irq_wakeup_vbi(btv, ovbi, STATE_ERROR);
|
|
|
|
|
|
|
|
/* cancel all outstanding capture / vbi requests */
|
|
|
|
while (!list_empty(&btv->capture)) {
|
|
|
|
item = list_entry(btv->capture.next, struct bttv_buffer, vb.queue);
|
|
|
|
list_del(&item->vb.queue);
|
|
|
|
item->vb.state = STATE_ERROR;
|
|
|
|
wake_up(&item->vb.done);
|
|
|
|
}
|
|
|
|
while (!list_empty(&btv->vcapture)) {
|
|
|
|
item = list_entry(btv->vcapture.next, struct bttv_buffer, vb.queue);
|
|
|
|
list_del(&item->vb.queue);
|
|
|
|
item->vb.state = STATE_ERROR;
|
|
|
|
wake_up(&item->vb.done);
|
|
|
|
}
|
|
|
|
|
|
|
|
btv->errors++;
|
|
|
|
spin_unlock_irqrestore(&btv->s_lock,flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bttv_irq_wakeup_top(struct bttv *btv)
|
|
|
|
{
|
|
|
|
struct bttv_buffer *wakeup = btv->curr.top;
|
|
|
|
|
|
|
|
if (NULL == wakeup)
|
|
|
|
return;
|
|
|
|
|
|
|
|
spin_lock(&btv->s_lock);
|
|
|
|
btv->curr.top_irq = 0;
|
|
|
|
btv->curr.top = NULL;
|
|
|
|
bttv_risc_hook(btv, RISC_SLOT_O_FIELD, NULL, 0);
|
|
|
|
|
|
|
|
do_gettimeofday(&wakeup->vb.ts);
|
|
|
|
wakeup->vb.field_count = btv->field_count;
|
|
|
|
wakeup->vb.state = STATE_DONE;
|
|
|
|
wake_up(&wakeup->vb.done);
|
|
|
|
spin_unlock(&btv->s_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int is_active(struct btcx_riscmem *risc, u32 rc)
|
|
|
|
{
|
|
|
|
if (rc < risc->dma)
|
|
|
|
return 0;
|
|
|
|
if (rc > risc->dma + risc->size)
|
|
|
|
return 0;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bttv_irq_switch_video(struct bttv *btv)
|
|
|
|
{
|
|
|
|
struct bttv_buffer_set new;
|
|
|
|
struct bttv_buffer_set old;
|
|
|
|
dma_addr_t rc;
|
|
|
|
|
|
|
|
spin_lock(&btv->s_lock);
|
|
|
|
|
|
|
|
/* new buffer set */
|
|
|
|
bttv_irq_next_video(btv, &new);
|
|
|
|
rc = btread(BT848_RISC_COUNT);
|
|
|
|
if ((btv->curr.top && is_active(&btv->curr.top->top, rc)) ||
|
|
|
|
(btv->curr.bottom && is_active(&btv->curr.bottom->bottom, rc))) {
|
|
|
|
btv->framedrop++;
|
|
|
|
if (debug_latency)
|
|
|
|
bttv_irq_debug_low_latency(btv, rc);
|
|
|
|
spin_unlock(&btv->s_lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* switch over */
|
|
|
|
old = btv->curr;
|
|
|
|
btv->curr = new;
|
|
|
|
btv->loop_irq &= ~1;
|
|
|
|
bttv_buffer_activate_video(btv, &new);
|
|
|
|
bttv_set_dma(btv, 0);
|
|
|
|
|
|
|
|
/* switch input */
|
|
|
|
if (UNSET != btv->new_input) {
|
|
|
|
video_mux(btv,btv->new_input);
|
|
|
|
btv->new_input = UNSET;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* wake up finished buffers */
|
|
|
|
bttv_irq_wakeup_video(btv, &old, &new, STATE_DONE);
|
|
|
|
spin_unlock(&btv->s_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
bttv_irq_switch_vbi(struct bttv *btv)
|
|
|
|
{
|
|
|
|
struct bttv_buffer *new = NULL;
|
|
|
|
struct bttv_buffer *old;
|
|
|
|
u32 rc;
|
|
|
|
|
|
|
|
spin_lock(&btv->s_lock);
|
|
|
|
|
|
|
|
if (!list_empty(&btv->vcapture))
|
|
|
|
new = list_entry(btv->vcapture.next, struct bttv_buffer, vb.queue);
|
|
|
|
old = btv->cvbi;
|
|
|
|
|
|
|
|
rc = btread(BT848_RISC_COUNT);
|
|
|
|
if (NULL != old && (is_active(&old->top, rc) ||
|
|
|
|
is_active(&old->bottom, rc))) {
|
|
|
|
btv->framedrop++;
|
|
|
|
if (debug_latency)
|
|
|
|
bttv_irq_debug_low_latency(btv, rc);
|
|
|
|
spin_unlock(&btv->s_lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* switch */
|
|
|
|
btv->cvbi = new;
|
|
|
|
btv->loop_irq &= ~4;
|
|
|
|
bttv_buffer_activate_vbi(btv, new);
|
|
|
|
bttv_set_dma(btv, 0);
|
|
|
|
|
|
|
|
bttv_irq_wakeup_vbi(btv, old, STATE_DONE);
|
|
|
|
spin_unlock(&btv->s_lock);
|
|
|
|
}
|
|
|
|
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
static irqreturn_t bttv_irq(int irq, void *dev_id)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
u32 stat,astat;
|
|
|
|
u32 dstat;
|
|
|
|
int count;
|
|
|
|
struct bttv *btv;
|
|
|
|
int handled = 0;
|
|
|
|
|
|
|
|
btv=(struct bttv *)dev_id;
|
2005-11-13 19:07:52 -05:00
|
|
|
|
2006-01-09 12:25:25 -05:00
|
|
|
if (btv->custom_irq)
|
|
|
|
handled = btv->custom_irq(btv);
|
2005-11-13 19:07:52 -05:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
count=0;
|
|
|
|
while (1) {
|
|
|
|
/* get/clear interrupt status bits */
|
|
|
|
stat=btread(BT848_INT_STAT);
|
|
|
|
astat=stat&btread(BT848_INT_MASK);
|
|
|
|
if (!astat)
|
|
|
|
break;
|
|
|
|
handled = 1;
|
|
|
|
btwrite(stat,BT848_INT_STAT);
|
|
|
|
|
|
|
|
/* get device status bits */
|
|
|
|
dstat=btread(BT848_DSTATUS);
|
|
|
|
|
|
|
|
if (irq_debug) {
|
|
|
|
printk(KERN_DEBUG "bttv%d: irq loop=%d fc=%d "
|
|
|
|
"riscs=%x, riscc=%08x, ",
|
|
|
|
btv->c.nr, count, btv->field_count,
|
|
|
|
stat>>28, btread(BT848_RISC_COUNT));
|
|
|
|
bttv_print_irqbits(stat,astat);
|
|
|
|
if (stat & BT848_INT_HLOCK)
|
|
|
|
printk(" HLOC => %s", (dstat & BT848_DSTATUS_HLOC)
|
|
|
|
? "yes" : "no");
|
|
|
|
if (stat & BT848_INT_VPRES)
|
|
|
|
printk(" PRES => %s", (dstat & BT848_DSTATUS_PRES)
|
|
|
|
? "yes" : "no");
|
|
|
|
if (stat & BT848_INT_FMTCHG)
|
|
|
|
printk(" NUML => %s", (dstat & BT848_DSTATUS_NUML)
|
|
|
|
? "625" : "525");
|
|
|
|
printk("\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (astat&BT848_INT_VSYNC)
|
2005-11-09 00:37:43 -05:00
|
|
|
btv->field_count++;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2006-01-09 12:25:25 -05:00
|
|
|
if ((astat & BT848_INT_GPINT) && btv->remote) {
|
2005-04-16 18:20:36 -04:00
|
|
|
wake_up(&btv->gpioq);
|
2006-01-09 12:25:25 -05:00
|
|
|
bttv_input_irq(btv);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
if (astat & BT848_INT_I2CDONE) {
|
|
|
|
btv->i2c_done = stat;
|
|
|
|
wake_up(&btv->i2c_queue);
|
|
|
|
}
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
if ((astat & BT848_INT_RISCI) && (stat & (4<<28)))
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_irq_switch_vbi(btv);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
if ((astat & BT848_INT_RISCI) && (stat & (2<<28)))
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_irq_wakeup_top(btv);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
if ((astat & BT848_INT_RISCI) && (stat & (1<<28)))
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_irq_switch_video(btv);
|
|
|
|
|
|
|
|
if ((astat & BT848_INT_HLOCK) && btv->opt_automute)
|
2006-03-18 19:31:00 -05:00
|
|
|
audio_mute(btv, btv->mute); /* trigger automute */
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) {
|
|
|
|
printk(KERN_INFO "bttv%d: %s%s @ %08x,",btv->c.nr,
|
|
|
|
(astat & BT848_INT_SCERR) ? "SCERR" : "",
|
|
|
|
(astat & BT848_INT_OCERR) ? "OCERR" : "",
|
|
|
|
btread(BT848_RISC_COUNT));
|
|
|
|
bttv_print_irqbits(stat,astat);
|
|
|
|
printk("\n");
|
|
|
|
if (bttv_debug)
|
|
|
|
bttv_print_riscaddr(btv);
|
|
|
|
}
|
|
|
|
if (fdsr && astat & BT848_INT_FDSR) {
|
|
|
|
printk(KERN_INFO "bttv%d: FDSR @ %08x\n",
|
|
|
|
btv->c.nr,btread(BT848_RISC_COUNT));
|
|
|
|
if (bttv_debug)
|
|
|
|
bttv_print_riscaddr(btv);
|
|
|
|
}
|
|
|
|
|
|
|
|
count++;
|
|
|
|
if (count > 4) {
|
2005-11-09 00:37:41 -05:00
|
|
|
|
|
|
|
if (count > 8 || !(astat & BT848_INT_GPINT)) {
|
2005-11-09 00:37:43 -05:00
|
|
|
btwrite(0, BT848_INT_MASK);
|
2005-11-09 00:37:41 -05:00
|
|
|
|
|
|
|
printk(KERN_ERR
|
|
|
|
"bttv%d: IRQ lockup, cleared int mask [", btv->c.nr);
|
|
|
|
} else {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"bttv%d: IRQ lockup, clearing GPINT from int mask [", btv->c.nr);
|
|
|
|
|
|
|
|
btwrite(btread(BT848_INT_MASK) & (-1 ^ BT848_INT_GPINT),
|
|
|
|
BT848_INT_MASK);
|
|
|
|
};
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_print_irqbits(stat,astat);
|
2005-11-09 00:37:41 -05:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
printk("]\n");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
btv->irq_total++;
|
|
|
|
if (handled)
|
|
|
|
btv->irq_me++;
|
|
|
|
return IRQ_RETVAL(handled);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* initialitation */
|
|
|
|
|
|
|
|
static struct video_device *vdev_init(struct bttv *btv,
|
|
|
|
struct video_device *template,
|
|
|
|
char *type)
|
|
|
|
{
|
|
|
|
struct video_device *vfd;
|
|
|
|
|
|
|
|
vfd = video_device_alloc();
|
|
|
|
if (NULL == vfd)
|
|
|
|
return NULL;
|
|
|
|
*vfd = *template;
|
|
|
|
vfd->minor = -1;
|
|
|
|
vfd->dev = &btv->c.pci->dev;
|
|
|
|
vfd->release = video_device_release;
|
|
|
|
snprintf(vfd->name, sizeof(vfd->name), "BT%d%s %s (%s)",
|
|
|
|
btv->id, (btv->id==848 && btv->revision==0x12) ? "A" : "",
|
|
|
|
type, bttv_tvcards[btv->c.type].name);
|
|
|
|
return vfd;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bttv_unregister_video(struct bttv *btv)
|
|
|
|
{
|
|
|
|
if (btv->video_dev) {
|
|
|
|
if (-1 != btv->video_dev->minor)
|
|
|
|
video_unregister_device(btv->video_dev);
|
|
|
|
else
|
|
|
|
video_device_release(btv->video_dev);
|
|
|
|
btv->video_dev = NULL;
|
|
|
|
}
|
|
|
|
if (btv->vbi_dev) {
|
|
|
|
if (-1 != btv->vbi_dev->minor)
|
|
|
|
video_unregister_device(btv->vbi_dev);
|
|
|
|
else
|
|
|
|
video_device_release(btv->vbi_dev);
|
|
|
|
btv->vbi_dev = NULL;
|
|
|
|
}
|
|
|
|
if (btv->radio_dev) {
|
|
|
|
if (-1 != btv->radio_dev->minor)
|
|
|
|
video_unregister_device(btv->radio_dev);
|
|
|
|
else
|
|
|
|
video_device_release(btv->radio_dev);
|
|
|
|
btv->radio_dev = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* register video4linux devices */
|
|
|
|
static int __devinit bttv_register_video(struct bttv *btv)
|
|
|
|
{
|
2005-08-04 15:53:30 -04:00
|
|
|
if (no_overlay <= 0) {
|
|
|
|
bttv_video_template.type |= VID_TYPE_OVERLAY;
|
|
|
|
} else {
|
|
|
|
printk("bttv: Overlay support disabled.\n");
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* video */
|
|
|
|
btv->video_dev = vdev_init(btv, &bttv_video_template, "video");
|
2005-11-09 00:37:43 -05:00
|
|
|
if (NULL == btv->video_dev)
|
2005-04-16 18:20:36 -04:00
|
|
|
goto err;
|
|
|
|
if (video_register_device(btv->video_dev,VFL_TYPE_GRABBER,video_nr)<0)
|
|
|
|
goto err;
|
|
|
|
printk(KERN_INFO "bttv%d: registered device video%d\n",
|
|
|
|
btv->c.nr,btv->video_dev->minor & 0x1f);
|
2006-07-29 16:18:06 -04:00
|
|
|
if (class_device_create_file(&btv->video_dev->class_dev,
|
|
|
|
&class_device_attr_card)<0) {
|
|
|
|
printk(KERN_ERR "bttv%d: class_device_create_file 'card' "
|
|
|
|
"failed\n", btv->c.nr);
|
|
|
|
goto err;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* vbi */
|
|
|
|
btv->vbi_dev = vdev_init(btv, &bttv_vbi_template, "vbi");
|
2005-11-09 00:37:43 -05:00
|
|
|
if (NULL == btv->vbi_dev)
|
2005-04-16 18:20:36 -04:00
|
|
|
goto err;
|
2005-11-09 00:37:43 -05:00
|
|
|
if (video_register_device(btv->vbi_dev,VFL_TYPE_VBI,vbi_nr)<0)
|
2005-04-16 18:20:36 -04:00
|
|
|
goto err;
|
|
|
|
printk(KERN_INFO "bttv%d: registered device vbi%d\n",
|
|
|
|
btv->c.nr,btv->vbi_dev->minor & 0x1f);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
if (!btv->has_radio)
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
/* radio */
|
|
|
|
btv->radio_dev = vdev_init(btv, &radio_template, "radio");
|
2005-11-09 00:37:43 -05:00
|
|
|
if (NULL == btv->radio_dev)
|
2005-04-16 18:20:36 -04:00
|
|
|
goto err;
|
|
|
|
if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,radio_nr)<0)
|
|
|
|
goto err;
|
|
|
|
printk(KERN_INFO "bttv%d: registered device radio%d\n",
|
|
|
|
btv->c.nr,btv->radio_dev->minor & 0x1f);
|
|
|
|
|
|
|
|
/* all done */
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err:
|
|
|
|
bttv_unregister_video(btv);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* on OpenFirmware machines (PowerMac at least), PCI memory cycle */
|
|
|
|
/* response on cards with no firmware is not enabled by OF */
|
|
|
|
static void pci_set_command(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
#if defined(__powerpc__)
|
2005-11-09 00:37:43 -05:00
|
|
|
unsigned int cmd;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
pci_read_config_dword(dev, PCI_COMMAND, &cmd);
|
|
|
|
cmd = (cmd | PCI_COMMAND_MEMORY );
|
|
|
|
pci_write_config_dword(dev, PCI_COMMAND, cmd);
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit bttv_probe(struct pci_dev *dev,
|
|
|
|
const struct pci_device_id *pci_id)
|
|
|
|
{
|
|
|
|
int result;
|
|
|
|
unsigned char lat;
|
|
|
|
struct bttv *btv;
|
|
|
|
|
|
|
|
if (bttv_num == BTTV_MAX)
|
|
|
|
return -ENOMEM;
|
|
|
|
printk(KERN_INFO "bttv: Bt8xx card found (%d).\n", bttv_num);
|
2005-11-09 00:37:43 -05:00
|
|
|
btv=&bttvs[bttv_num];
|
2005-04-16 18:20:36 -04:00
|
|
|
memset(btv,0,sizeof(*btv));
|
|
|
|
btv->c.nr = bttv_num;
|
|
|
|
sprintf(btv->c.name,"bttv%d",btv->c.nr);
|
|
|
|
|
|
|
|
/* initialize structs / fill in defaults */
|
2006-01-13 11:10:24 -05:00
|
|
|
mutex_init(&btv->lock);
|
2005-11-09 00:37:43 -05:00
|
|
|
spin_lock_init(&btv->s_lock);
|
|
|
|
spin_lock_init(&btv->gpio_lock);
|
|
|
|
init_waitqueue_head(&btv->gpioq);
|
|
|
|
init_waitqueue_head(&btv->i2c_queue);
|
|
|
|
INIT_LIST_HEAD(&btv->c.subs);
|
|
|
|
INIT_LIST_HEAD(&btv->capture);
|
|
|
|
INIT_LIST_HEAD(&btv->vcapture);
|
2005-04-16 18:20:36 -04:00
|
|
|
v4l2_prio_init(&btv->prio);
|
|
|
|
|
|
|
|
init_timer(&btv->timeout);
|
|
|
|
btv->timeout.function = bttv_irq_timeout;
|
|
|
|
btv->timeout.data = (unsigned long)btv;
|
|
|
|
|
2005-11-09 00:36:21 -05:00
|
|
|
btv->i2c_rc = -1;
|
|
|
|
btv->tuner_type = UNSET;
|
2005-04-16 18:20:36 -04:00
|
|
|
btv->new_input = UNSET;
|
|
|
|
btv->has_radio=radio[btv->c.nr];
|
|
|
|
|
|
|
|
/* pci stuff (init, get irq/mmio, ... */
|
|
|
|
btv->c.pci = dev;
|
2005-11-09 00:36:21 -05:00
|
|
|
btv->id = dev->device;
|
2005-04-16 18:20:36 -04:00
|
|
|
if (pci_enable_device(dev)) {
|
2005-11-09 00:36:21 -05:00
|
|
|
printk(KERN_WARNING "bttv%d: Can't enable device.\n",
|
2005-04-16 18:20:36 -04:00
|
|
|
btv->c.nr);
|
|
|
|
return -EIO;
|
|
|
|
}
|
2005-11-09 00:37:43 -05:00
|
|
|
if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
|
|
|
|
printk(KERN_WARNING "bttv%d: No suitable DMA available.\n",
|
2005-04-16 18:20:36 -04:00
|
|
|
btv->c.nr);
|
|
|
|
return -EIO;
|
2005-11-09 00:37:43 -05:00
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
if (!request_mem_region(pci_resource_start(dev,0),
|
|
|
|
pci_resource_len(dev,0),
|
|
|
|
btv->c.name)) {
|
2006-06-12 18:16:52 -04:00
|
|
|
printk(KERN_WARNING "bttv%d: can't request iomem (0x%llx).\n",
|
|
|
|
btv->c.nr,
|
|
|
|
(unsigned long long)pci_resource_start(dev,0));
|
2005-04-16 18:20:36 -04:00
|
|
|
return -EBUSY;
|
|
|
|
}
|
2005-11-09 00:37:43 -05:00
|
|
|
pci_set_master(dev);
|
2005-04-16 18:20:36 -04:00
|
|
|
pci_set_command(dev);
|
|
|
|
pci_set_drvdata(dev,btv);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision);
|
|
|
|
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
|
|
|
|
printk(KERN_INFO "bttv%d: Bt%d (rev %d) at %s, ",
|
|
|
|
bttv_num,btv->id, btv->revision, pci_name(dev));
|
2006-06-12 18:16:52 -04:00
|
|
|
printk("irq: %d, latency: %d, mmio: 0x%llx\n",
|
|
|
|
btv->c.pci->irq, lat,
|
|
|
|
(unsigned long long)pci_resource_start(dev,0));
|
2005-04-16 18:20:36 -04:00
|
|
|
schedule();
|
|
|
|
|
2006-12-20 08:08:56 -05:00
|
|
|
btv->bt848_mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
|
|
|
|
if (NULL == btv->bt848_mmio) {
|
2005-04-16 18:20:36 -04:00
|
|
|
printk("bttv%d: ioremap() failed\n", btv->c.nr);
|
|
|
|
result = -EIO;
|
|
|
|
goto fail1;
|
|
|
|
}
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* identify card */
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_idcard(btv);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* disable irqs, register irq handler */
|
2005-04-16 18:20:36 -04:00
|
|
|
btwrite(0, BT848_INT_MASK);
|
2005-11-09 00:37:43 -05:00
|
|
|
result = request_irq(btv->c.pci->irq, bttv_irq,
|
2006-07-01 22:29:37 -04:00
|
|
|
IRQF_SHARED | IRQF_DISABLED,btv->c.name,(void *)btv);
|
2005-11-09 00:37:43 -05:00
|
|
|
if (result < 0) {
|
|
|
|
printk(KERN_ERR "bttv%d: can't get IRQ %d\n",
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_num,btv->c.pci->irq);
|
|
|
|
goto fail1;
|
2005-11-09 00:37:43 -05:00
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
if (0 != bttv_handle_chipset(btv)) {
|
|
|
|
result = -EIO;
|
|
|
|
goto fail2;
|
2005-11-09 00:37:43 -05:00
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* init options from insmod args */
|
|
|
|
btv->opt_combfilter = combfilter;
|
|
|
|
btv->opt_lumafilter = lumafilter;
|
|
|
|
btv->opt_automute = automute;
|
|
|
|
btv->opt_chroma_agc = chroma_agc;
|
|
|
|
btv->opt_adc_crush = adc_crush;
|
|
|
|
btv->opt_vcr_hack = vcr_hack;
|
|
|
|
btv->opt_whitecrush_upper = whitecrush_upper;
|
|
|
|
btv->opt_whitecrush_lower = whitecrush_lower;
|
2005-06-28 23:45:25 -04:00
|
|
|
btv->opt_uv_ratio = uv_ratio;
|
|
|
|
btv->opt_full_luma_range = full_luma_range;
|
|
|
|
btv->opt_coring = coring;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* fill struct bttv with some useful defaults */
|
|
|
|
btv->init.btv = btv;
|
|
|
|
btv->init.ov.w.width = 320;
|
|
|
|
btv->init.ov.w.height = 240;
|
|
|
|
btv->init.fmt = format_by_palette(VIDEO_PALETTE_RGB24);
|
|
|
|
btv->init.width = 320;
|
|
|
|
btv->init.height = 240;
|
|
|
|
btv->input = 0;
|
|
|
|
|
|
|
|
/* initialize hardware */
|
2005-11-09 00:37:43 -05:00
|
|
|
if (bttv_gpio)
|
|
|
|
bttv_gpio_tracking(btv,"pre-init");
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
bttv_risc_init_main(btv);
|
|
|
|
init_bt848(btv);
|
|
|
|
|
|
|
|
/* gpio */
|
2005-11-09 00:37:43 -05:00
|
|
|
btwrite(0x00, BT848_GPIO_REG_INP);
|
|
|
|
btwrite(0x00, BT848_GPIO_OUT_EN);
|
|
|
|
if (bttv_verbose)
|
|
|
|
bttv_gpio_tracking(btv,"init");
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* needs to be done before i2c is registered */
|
|
|
|
bttv_init_card1(btv);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* register i2c + gpio */
|
|
|
|
init_bttv_i2c(btv);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* some card-specific stuff (needs working i2c) */
|
|
|
|
bttv_init_card2(btv);
|
2005-04-16 18:20:36 -04:00
|
|
|
init_irqreg(btv);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* register video4linux + input */
|
2005-04-16 18:20:36 -04:00
|
|
|
if (!bttv_tvcards[btv->c.type].no_video) {
|
|
|
|
bttv_register_video(btv);
|
|
|
|
bt848_bright(btv,32768);
|
|
|
|
bt848_contrast(btv,32768);
|
|
|
|
bt848_hue(btv,32768);
|
|
|
|
bt848_sat(btv,32768);
|
2006-03-18 19:31:00 -05:00
|
|
|
audio_mute(btv, 1);
|
V4L/DVB (5808): Bttv: fix v4l1 breaking the driver
If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as
the first user after the driver is loaded, the driver wedges itself and will
never capture properly. Even if one uses a V4L2 application later, it still
won't work.
If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2
driver, then the driver will be ok. One can then run a V4L1 application, and
it will work.
It turns out the problem is with norm changing and the crop support that was
added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was
set too across opens. If one changes the norm via V4L1, the cropping
parameters are not reset like they should be, and they'll remain broken across
device opens.
This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl
VIDIOCSCHAN handler. The norm is set via the existing call to set_input(),
which calls set_tvnorm(), which will reset the cropping values now that it is
able to detect the norm change.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03 14:08:10 -04:00
|
|
|
set_input(btv, 0, btv->tvnorm);
|
V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting
applications to capture or overlay a subsection of the picture or to
extend the capture window beyond active video, into the VBI area and the
horizontal blanking. VBI capturing can start and end on any line,
including the picture area, and apps can capture different lines of each
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping.
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which
depend on former driver limitations, such as never getting more than 640
pixels regardless of the requested width.
Also, new freedoms require additional checks for conflicts and some
applications may not expect an EBUSY error from the VIDIOC_QBUF and
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.
Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-18 14:17:39 -05:00
|
|
|
bttv_crop_reset(&btv->crop[0], btv->tvnorm);
|
|
|
|
btv->crop[1] = btv->crop[0]; /* current = default */
|
|
|
|
disclaim_vbi_lines(btv);
|
|
|
|
disclaim_video_lines(btv);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2007-03-24 14:23:50 -04:00
|
|
|
/* add subdevices and autoload dvb-bt8xx if needed */
|
|
|
|
if (bttv_tvcards[btv->c.type].has_dvb) {
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_sub_add_device(&btv->c, "dvb");
|
2007-03-24 14:23:50 -04:00
|
|
|
request_modules(btv);
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2006-01-09 12:25:25 -05:00
|
|
|
bttv_input_init(btv);
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* everything is fine */
|
|
|
|
bttv_num++;
|
2005-11-09 00:37:43 -05:00
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
fail2:
|
2005-11-09 00:37:43 -05:00
|
|
|
free_irq(btv->c.pci->irq,btv);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
fail1:
|
|
|
|
if (btv->bt848_mmio)
|
|
|
|
iounmap(btv->bt848_mmio);
|
|
|
|
release_mem_region(pci_resource_start(btv->c.pci,0),
|
|
|
|
pci_resource_len(btv->c.pci,0));
|
|
|
|
pci_set_drvdata(dev,NULL);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __devexit bttv_remove(struct pci_dev *pci_dev)
|
|
|
|
{
|
2005-11-09 00:37:43 -05:00
|
|
|
struct bttv *btv = pci_get_drvdata(pci_dev);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
if (bttv_verbose)
|
|
|
|
printk("bttv%d: unloading\n",btv->c.nr);
|
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* shutdown everything (DMA+IRQs) */
|
2005-04-16 18:20:36 -04:00
|
|
|
btand(~15, BT848_GPIO_DMA_CTL);
|
|
|
|
btwrite(0, BT848_INT_MASK);
|
|
|
|
btwrite(~0x0, BT848_INT_STAT);
|
|
|
|
btwrite(0x0, BT848_GPIO_OUT_EN);
|
|
|
|
if (bttv_gpio)
|
|
|
|
bttv_gpio_tracking(btv,"cleanup");
|
|
|
|
|
|
|
|
/* tell gpio modules we are leaving ... */
|
|
|
|
btv->shutdown=1;
|
|
|
|
wake_up(&btv->gpioq);
|
2006-01-09 12:25:25 -05:00
|
|
|
bttv_input_fini(btv);
|
2006-01-09 12:25:28 -05:00
|
|
|
bttv_sub_del_devices(&btv->c);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-09 00:37:43 -05:00
|
|
|
/* unregister i2c_bus + input */
|
2005-04-16 18:20:36 -04:00
|
|
|
fini_bttv_i2c(btv);
|
|
|
|
|
|
|
|
/* unregister video4linux */
|
|
|
|
bttv_unregister_video(btv);
|
|
|
|
|
|
|
|
/* free allocated memory */
|
|
|
|
btcx_riscmem_free(btv->c.pci,&btv->main);
|
|
|
|
|
|
|
|
/* free ressources */
|
2005-11-09 00:37:43 -05:00
|
|
|
free_irq(btv->c.pci->irq,btv);
|
2005-04-16 18:20:36 -04:00
|
|
|
iounmap(btv->bt848_mmio);
|
2005-11-09 00:37:43 -05:00
|
|
|
release_mem_region(pci_resource_start(btv->c.pci,0),
|
|
|
|
pci_resource_len(btv->c.pci,0));
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
pci_set_drvdata(pci_dev, NULL);
|
2005-11-09 00:37:43 -05:00
|
|
|
return;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2006-08-12 21:01:27 -04:00
|
|
|
#ifdef CONFIG_PM
|
2005-04-16 18:20:36 -04:00
|
|
|
static int bttv_suspend(struct pci_dev *pci_dev, pm_message_t state)
|
|
|
|
{
|
2005-11-09 00:37:43 -05:00
|
|
|
struct bttv *btv = pci_get_drvdata(pci_dev);
|
2005-04-16 18:20:36 -04:00
|
|
|
struct bttv_buffer_set idle;
|
|
|
|
unsigned long flags;
|
|
|
|
|
2005-09-09 16:04:05 -04:00
|
|
|
dprintk("bttv%d: suspend %d\n", btv->c.nr, state.event);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* stop dma + irqs */
|
|
|
|
spin_lock_irqsave(&btv->s_lock,flags);
|
|
|
|
memset(&idle, 0, sizeof(idle));
|
|
|
|
btv->state.video = btv->curr;
|
|
|
|
btv->state.vbi = btv->cvbi;
|
|
|
|
btv->state.loop_irq = btv->loop_irq;
|
|
|
|
btv->curr = idle;
|
|
|
|
btv->loop_irq = 0;
|
|
|
|
bttv_buffer_activate_video(btv, &idle);
|
|
|
|
bttv_buffer_activate_vbi(btv, NULL);
|
|
|
|
bttv_set_dma(btv, 0);
|
|
|
|
btwrite(0, BT848_INT_MASK);
|
|
|
|
spin_unlock_irqrestore(&btv->s_lock,flags);
|
|
|
|
|
|
|
|
/* save bt878 state */
|
|
|
|
btv->state.gpio_enable = btread(BT848_GPIO_OUT_EN);
|
|
|
|
btv->state.gpio_data = gpio_read();
|
|
|
|
|
|
|
|
/* save pci state */
|
|
|
|
pci_save_state(pci_dev);
|
|
|
|
if (0 != pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state))) {
|
|
|
|
pci_disable_device(pci_dev);
|
|
|
|
btv->state.disabled = 1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bttv_resume(struct pci_dev *pci_dev)
|
|
|
|
{
|
2005-11-09 00:37:43 -05:00
|
|
|
struct bttv *btv = pci_get_drvdata(pci_dev);
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned long flags;
|
2005-09-09 16:03:55 -04:00
|
|
|
int err;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
dprintk("bttv%d: resume\n", btv->c.nr);
|
|
|
|
|
|
|
|
/* restore pci state */
|
|
|
|
if (btv->state.disabled) {
|
2005-09-09 16:03:55 -04:00
|
|
|
err=pci_enable_device(pci_dev);
|
|
|
|
if (err) {
|
|
|
|
printk(KERN_WARNING "bttv%d: Can't enable device.\n",
|
|
|
|
btv->c.nr);
|
|
|
|
return err;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
btv->state.disabled = 0;
|
|
|
|
}
|
2005-09-09 16:03:55 -04:00
|
|
|
err=pci_set_power_state(pci_dev, PCI_D0);
|
|
|
|
if (err) {
|
|
|
|
pci_disable_device(pci_dev);
|
|
|
|
printk(KERN_WARNING "bttv%d: Can't enable device.\n",
|
|
|
|
btv->c.nr);
|
|
|
|
btv->state.disabled = 1;
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
pci_restore_state(pci_dev);
|
|
|
|
|
|
|
|
/* restore bt878 state */
|
|
|
|
bttv_reinit_bt848(btv);
|
|
|
|
gpio_inout(0xffffff, btv->state.gpio_enable);
|
|
|
|
gpio_write(btv->state.gpio_data);
|
|
|
|
|
|
|
|
/* restart dma */
|
|
|
|
spin_lock_irqsave(&btv->s_lock,flags);
|
|
|
|
btv->curr = btv->state.video;
|
|
|
|
btv->cvbi = btv->state.vbi;
|
|
|
|
btv->loop_irq = btv->state.loop_irq;
|
|
|
|
bttv_buffer_activate_video(btv, &btv->curr);
|
|
|
|
bttv_buffer_activate_vbi(btv, btv->cvbi);
|
|
|
|
bttv_set_dma(btv, 0);
|
|
|
|
spin_unlock_irqrestore(&btv->s_lock,flags);
|
|
|
|
return 0;
|
|
|
|
}
|
2006-08-12 21:01:27 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
static struct pci_device_id bttv_pci_tbl[] = {
|
2005-11-09 00:37:43 -05:00
|
|
|
{PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848,
|
|
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
2005-04-16 18:20:36 -04:00
|
|
|
{PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849,
|
2005-11-09 00:37:43 -05:00
|
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
2005-04-16 18:20:36 -04:00
|
|
|
{PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878,
|
2005-11-09 00:37:43 -05:00
|
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
2005-04-16 18:20:36 -04:00
|
|
|
{PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879,
|
2005-11-09 00:37:43 -05:00
|
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
|
|
{0,}
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, bttv_pci_tbl);
|
|
|
|
|
|
|
|
static struct pci_driver bttv_pci_driver = {
|
2005-11-09 00:37:43 -05:00
|
|
|
.name = "bttv",
|
|
|
|
.id_table = bttv_pci_tbl,
|
|
|
|
.probe = bttv_probe,
|
|
|
|
.remove = __devexit_p(bttv_remove),
|
2006-08-12 21:01:27 -04:00
|
|
|
#ifdef CONFIG_PM
|
2005-04-16 18:20:36 -04:00
|
|
|
.suspend = bttv_suspend,
|
|
|
|
.resume = bttv_resume,
|
2006-08-12 21:01:27 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
|
|
|
|
|
|
|
static int bttv_init_module(void)
|
|
|
|
{
|
2006-07-15 08:08:26 -04:00
|
|
|
int ret;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
bttv_num = 0;
|
|
|
|
|
|
|
|
printk(KERN_INFO "bttv: driver version %d.%d.%d loaded\n",
|
|
|
|
(BTTV_VERSION_CODE >> 16) & 0xff,
|
|
|
|
(BTTV_VERSION_CODE >> 8) & 0xff,
|
|
|
|
BTTV_VERSION_CODE & 0xff);
|
|
|
|
#ifdef SNAPSHOT
|
|
|
|
printk(KERN_INFO "bttv: snapshot date %04d-%02d-%02d\n",
|
|
|
|
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
|
|
|
|
#endif
|
|
|
|
if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME)
|
|
|
|
gbuffers = 2;
|
|
|
|
if (gbufsize < 0 || gbufsize > BTTV_MAX_FBUF)
|
|
|
|
gbufsize = BTTV_MAX_FBUF;
|
|
|
|
gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK;
|
|
|
|
if (bttv_verbose)
|
|
|
|
printk(KERN_INFO "bttv: using %d buffers with %dk (%d pages) each for capture\n",
|
|
|
|
gbuffers, gbufsize >> 10, gbufsize >> PAGE_SHIFT);
|
|
|
|
|
|
|
|
bttv_check_chipset();
|
|
|
|
|
2006-07-15 08:08:26 -04:00
|
|
|
ret = bus_register(&bttv_sub_bus_type);
|
|
|
|
if (ret < 0) {
|
|
|
|
printk(KERN_WARNING "bttv: bus_register error: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
2006-01-09 12:25:17 -05:00
|
|
|
return pci_register_driver(&bttv_pci_driver);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static void bttv_cleanup_module(void)
|
|
|
|
{
|
|
|
|
pci_unregister_driver(&bttv_pci_driver);
|
|
|
|
bus_unregister(&bttv_sub_bus_type);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(bttv_init_module);
|
|
|
|
module_exit(bttv_cleanup_module);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Local variables:
|
|
|
|
* c-basic-offset: 8
|
|
|
|
* End:
|
|
|
|
*/
|