2019-02-18 18:02:31 -05:00
|
|
|
MDS - Microarchitectural Data Sampling
|
|
|
|
======================================
|
|
|
|
|
|
|
|
Microarchitectural Data Sampling is a hardware vulnerability which allows
|
|
|
|
unprivileged speculative access to data which is available in various CPU
|
|
|
|
internal buffers.
|
|
|
|
|
|
|
|
Affected processors
|
|
|
|
-------------------
|
|
|
|
|
|
|
|
This vulnerability affects a wide range of Intel processors. The
|
|
|
|
vulnerability is not present on:
|
|
|
|
|
|
|
|
- Processors from AMD, Centaur and other non Intel vendors
|
|
|
|
|
|
|
|
- Older processor models, where the CPU family is < 6
|
|
|
|
|
|
|
|
- Some Atoms (Bonnell, Saltwell, Goldmont, GoldmontPlus)
|
|
|
|
|
|
|
|
- Intel processors which have the ARCH_CAP_MDS_NO bit set in the
|
|
|
|
IA32_ARCH_CAPABILITIES MSR.
|
|
|
|
|
|
|
|
Whether a processor is affected or not can be read out from the MDS
|
|
|
|
vulnerability file in sysfs. See :ref:`mds_sys_info`.
|
|
|
|
|
|
|
|
Not all processors are affected by all variants of MDS, but the mitigation
|
|
|
|
is identical for all of them so the kernel treats them as a single
|
|
|
|
vulnerability.
|
|
|
|
|
|
|
|
Related CVEs
|
|
|
|
------------
|
|
|
|
|
|
|
|
The following CVE entries are related to the MDS vulnerability:
|
|
|
|
|
2019-05-06 15:23:50 -04:00
|
|
|
============== ===== ===================================================
|
2019-02-18 18:02:31 -05:00
|
|
|
CVE-2018-12126 MSBDS Microarchitectural Store Buffer Data Sampling
|
|
|
|
CVE-2018-12130 MFBDS Microarchitectural Fill Buffer Data Sampling
|
|
|
|
CVE-2018-12127 MLPDS Microarchitectural Load Port Data Sampling
|
2019-05-06 15:23:50 -04:00
|
|
|
CVE-2019-11091 MDSUM Microarchitectural Data Sampling Uncacheable Memory
|
|
|
|
============== ===== ===================================================
|
2019-02-18 18:02:31 -05:00
|
|
|
|
|
|
|
Problem
|
|
|
|
-------
|
|
|
|
|
|
|
|
When performing store, load, L1 refill operations, processors write data
|
|
|
|
into temporary microarchitectural structures (buffers). The data in the
|
|
|
|
buffer can be forwarded to load operations as an optimization.
|
|
|
|
|
|
|
|
Under certain conditions, usually a fault/assist caused by a load
|
|
|
|
operation, data unrelated to the load memory address can be speculatively
|
|
|
|
forwarded from the buffers. Because the load operation causes a fault or
|
|
|
|
assist and its result will be discarded, the forwarded data will not cause
|
|
|
|
incorrect program execution or state changes. But a malicious operation
|
|
|
|
may be able to forward this speculative data to a disclosure gadget which
|
|
|
|
allows in turn to infer the value via a cache side channel attack.
|
|
|
|
|
|
|
|
Because the buffers are potentially shared between Hyper-Threads cross
|
|
|
|
Hyper-Thread attacks are possible.
|
|
|
|
|
|
|
|
Deeper technical information is available in the MDS specific x86
|
|
|
|
architecture section: :ref:`Documentation/x86/mds.rst <mds>`.
|
|
|
|
|
|
|
|
|
|
|
|
Attack scenarios
|
|
|
|
----------------
|
|
|
|
|
|
|
|
Attacks against the MDS vulnerabilities can be mounted from malicious non
|
|
|
|
priviledged user space applications running on hosts or guest. Malicious
|
|
|
|
guest OSes can obviously mount attacks as well.
|
|
|
|
|
|
|
|
Contrary to other speculation based vulnerabilities the MDS vulnerability
|
|
|
|
does not allow the attacker to control the memory target address. As a
|
|
|
|
consequence the attacks are purely sampling based, but as demonstrated with
|
|
|
|
the TLBleed attack samples can be postprocessed successfully.
|
|
|
|
|
|
|
|
Web-Browsers
|
|
|
|
^^^^^^^^^^^^
|
|
|
|
|
|
|
|
It's unclear whether attacks through Web-Browsers are possible at
|
|
|
|
all. The exploitation through Java-Script is considered very unlikely,
|
|
|
|
but other widely used web technologies like Webassembly could possibly be
|
|
|
|
abused.
|
|
|
|
|
|
|
|
|
|
|
|
.. _mds_sys_info:
|
|
|
|
|
|
|
|
MDS system information
|
|
|
|
-----------------------
|
|
|
|
|
|
|
|
The Linux kernel provides a sysfs interface to enumerate the current MDS
|
|
|
|
status of the system: whether the system is vulnerable, and which
|
|
|
|
mitigations are active. The relevant sysfs file is:
|
|
|
|
|
|
|
|
/sys/devices/system/cpu/vulnerabilities/mds
|
|
|
|
|
|
|
|
The possible values in this file are:
|
|
|
|
|
2019-05-06 19:52:58 -04:00
|
|
|
.. list-table::
|
|
|
|
|
|
|
|
* - 'Not affected'
|
|
|
|
- The processor is not vulnerable
|
|
|
|
* - 'Vulnerable'
|
|
|
|
- The processor is vulnerable, but no mitigation enabled
|
|
|
|
* - 'Vulnerable: Clear CPU buffers attempted, no microcode'
|
|
|
|
- The processor is vulnerable but microcode is not updated.
|
|
|
|
|
|
|
|
The mitigation is enabled on a best effort basis. See :ref:`vmwerv`
|
|
|
|
* - 'Mitigation: Clear CPU buffers'
|
|
|
|
- The processor is vulnerable and the CPU buffer clearing mitigation is
|
|
|
|
enabled.
|
2019-02-18 18:02:31 -05:00
|
|
|
|
|
|
|
If the processor is vulnerable then the following information is appended
|
|
|
|
to the above information:
|
|
|
|
|
|
|
|
======================== ============================================
|
|
|
|
'SMT vulnerable' SMT is enabled
|
|
|
|
'SMT mitigated' SMT is enabled and mitigated
|
|
|
|
'SMT disabled' SMT is disabled
|
|
|
|
'SMT Host state unknown' Kernel runs in a VM, Host SMT state unknown
|
|
|
|
======================== ============================================
|
|
|
|
|
|
|
|
.. _vmwerv:
|
|
|
|
|
|
|
|
Best effort mitigation mode
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
If the processor is vulnerable, but the availability of the microcode based
|
|
|
|
mitigation mechanism is not advertised via CPUID the kernel selects a best
|
|
|
|
effort mitigation mode. This mode invokes the mitigation instructions
|
|
|
|
without a guarantee that they clear the CPU buffers.
|
|
|
|
|
|
|
|
This is done to address virtualization scenarios where the host has the
|
|
|
|
microcode update applied, but the hypervisor is not yet updated to expose
|
|
|
|
the CPUID to the guest. If the host has updated microcode the protection
|
|
|
|
takes effect otherwise a few cpu cycles are wasted pointlessly.
|
|
|
|
|
|
|
|
The state in the mds sysfs file reflects this situation accordingly.
|
|
|
|
|
|
|
|
|
|
|
|
Mitigation mechanism
|
|
|
|
-------------------------
|
|
|
|
|
|
|
|
The kernel detects the affected CPUs and the presence of the microcode
|
|
|
|
which is required.
|
|
|
|
|
|
|
|
If a CPU is affected and the microcode is available, then the kernel
|
|
|
|
enables the mitigation by default. The mitigation can be controlled at boot
|
|
|
|
time via a kernel command line option. See
|
|
|
|
:ref:`mds_mitigation_control_command_line`.
|
|
|
|
|
|
|
|
.. _cpu_buffer_clear:
|
|
|
|
|
|
|
|
CPU buffer clearing
|
|
|
|
^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
The mitigation for MDS clears the affected CPU buffers on return to user
|
|
|
|
space and when entering a guest.
|
|
|
|
|
|
|
|
If SMT is enabled it also clears the buffers on idle entry when the CPU
|
|
|
|
is only affected by MSBDS and not any other MDS variant, because the
|
|
|
|
other variants cannot be protected against cross Hyper-Thread attacks.
|
|
|
|
|
|
|
|
For CPUs which are only affected by MSBDS the user space, guest and idle
|
|
|
|
transition mitigations are sufficient and SMT is not affected.
|
|
|
|
|
|
|
|
.. _virt_mechanism:
|
|
|
|
|
|
|
|
Virtualization mitigation
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
The protection for host to guest transition depends on the L1TF
|
|
|
|
vulnerability of the CPU:
|
|
|
|
|
|
|
|
- CPU is affected by L1TF:
|
|
|
|
|
|
|
|
If the L1D flush mitigation is enabled and up to date microcode is
|
|
|
|
available, the L1D flush mitigation is automatically protecting the
|
|
|
|
guest transition.
|
|
|
|
|
|
|
|
If the L1D flush mitigation is disabled then the MDS mitigation is
|
|
|
|
invoked explicit when the host MDS mitigation is enabled.
|
|
|
|
|
|
|
|
For details on L1TF and virtualization see:
|
|
|
|
:ref:`Documentation/admin-guide/hw-vuln//l1tf.rst <mitigation_control_kvm>`.
|
|
|
|
|
|
|
|
- CPU is not affected by L1TF:
|
|
|
|
|
|
|
|
CPU buffers are flushed before entering the guest when the host MDS
|
|
|
|
mitigation is enabled.
|
|
|
|
|
|
|
|
The resulting MDS protection matrix for the host to guest transition:
|
|
|
|
|
|
|
|
============ ===== ============= ============ =================
|
|
|
|
L1TF MDS VMX-L1FLUSH Host MDS MDS-State
|
|
|
|
|
|
|
|
Don't care No Don't care N/A Not affected
|
|
|
|
|
|
|
|
Yes Yes Disabled Off Vulnerable
|
|
|
|
|
|
|
|
Yes Yes Disabled Full Mitigated
|
|
|
|
|
|
|
|
Yes Yes Enabled Don't care Mitigated
|
|
|
|
|
|
|
|
No Yes N/A Off Vulnerable
|
|
|
|
|
|
|
|
No Yes N/A Full Mitigated
|
|
|
|
============ ===== ============= ============ =================
|
|
|
|
|
|
|
|
This only covers the host to guest transition, i.e. prevents leakage from
|
|
|
|
host to guest, but does not protect the guest internally. Guests need to
|
|
|
|
have their own protections.
|
|
|
|
|
|
|
|
.. _xeon_phi:
|
|
|
|
|
|
|
|
XEON PHI specific considerations
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
The XEON PHI processor family is affected by MSBDS which can be exploited
|
|
|
|
cross Hyper-Threads when entering idle states. Some XEON PHI variants allow
|
|
|
|
to use MWAIT in user space (Ring 3) which opens an potential attack vector
|
|
|
|
for malicious user space. The exposure can be disabled on the kernel
|
|
|
|
command line with the 'ring3mwait=disable' command line option.
|
|
|
|
|
|
|
|
XEON PHI is not affected by the other MDS variants and MSBDS is mitigated
|
|
|
|
before the CPU enters a idle state. As XEON PHI is not affected by L1TF
|
|
|
|
either disabling SMT is not required for full protection.
|
|
|
|
|
|
|
|
.. _mds_smt_control:
|
|
|
|
|
|
|
|
SMT control
|
|
|
|
^^^^^^^^^^^
|
|
|
|
|
|
|
|
All MDS variants except MSBDS can be attacked cross Hyper-Threads. That
|
|
|
|
means on CPUs which are affected by MFBDS or MLPDS it is necessary to
|
|
|
|
disable SMT for full protection. These are most of the affected CPUs; the
|
|
|
|
exception is XEON PHI, see :ref:`xeon_phi`.
|
|
|
|
|
|
|
|
Disabling SMT can have a significant performance impact, but the impact
|
|
|
|
depends on the type of workloads.
|
|
|
|
|
|
|
|
See the relevant chapter in the L1TF mitigation documentation for details:
|
|
|
|
:ref:`Documentation/admin-guide/hw-vuln/l1tf.rst <smt_control>`.
|
|
|
|
|
|
|
|
|
|
|
|
.. _mds_mitigation_control_command_line:
|
|
|
|
|
|
|
|
Mitigation control on the kernel command line
|
|
|
|
---------------------------------------------
|
|
|
|
|
|
|
|
The kernel command line allows to control the MDS mitigations at boot
|
|
|
|
time with the option "mds=". The valid arguments for this option are:
|
|
|
|
|
|
|
|
============ =============================================================
|
|
|
|
full If the CPU is vulnerable, enable all available mitigations
|
|
|
|
for the MDS vulnerability, CPU buffer clearing on exit to
|
|
|
|
userspace and when entering a VM. Idle transitions are
|
|
|
|
protected as well if SMT is enabled.
|
|
|
|
|
|
|
|
It does not automatically disable SMT.
|
|
|
|
|
2019-04-02 10:59:33 -04:00
|
|
|
full,nosmt The same as mds=full, with SMT disabled on vulnerable
|
|
|
|
CPUs. This is the complete mitigation.
|
|
|
|
|
2019-02-18 18:02:31 -05:00
|
|
|
off Disables MDS mitigations completely.
|
|
|
|
|
|
|
|
============ =============================================================
|
|
|
|
|
2019-11-15 11:14:44 -05:00
|
|
|
Not specifying this option is equivalent to "mds=full". For processors
|
|
|
|
that are affected by both TAA (TSX Asynchronous Abort) and MDS,
|
|
|
|
specifying just "mds=off" without an accompanying "tsx_async_abort=off"
|
|
|
|
will have no effect as the same mitigation is used for both
|
|
|
|
vulnerabilities.
|
2019-02-18 18:02:31 -05:00
|
|
|
|
|
|
|
Mitigation selection guide
|
|
|
|
--------------------------
|
|
|
|
|
|
|
|
1. Trusted userspace
|
|
|
|
^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
If all userspace applications are from a trusted source and do not
|
|
|
|
execute untrusted code which is supplied externally, then the mitigation
|
|
|
|
can be disabled.
|
|
|
|
|
|
|
|
|
|
|
|
2. Virtualization with trusted guests
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
The same considerations as above versus trusted user space apply.
|
|
|
|
|
|
|
|
3. Virtualization with untrusted guests
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
The protection depends on the state of the L1TF mitigations.
|
|
|
|
See :ref:`virt_mechanism`.
|
|
|
|
|
|
|
|
If the MDS mitigation is enabled and SMT is disabled, guest to host and
|
|
|
|
guest to guest attacks are prevented.
|
|
|
|
|
|
|
|
.. _mds_default_mitigations:
|
|
|
|
|
|
|
|
Default mitigations
|
|
|
|
-------------------
|
|
|
|
|
|
|
|
The kernel default mitigations for vulnerable processors are:
|
|
|
|
|
|
|
|
- Enable CPU buffer clearing
|
|
|
|
|
|
|
|
The kernel does not by default enforce the disabling of SMT, which leaves
|
|
|
|
SMT systems vulnerable when running untrusted code. The same rationale as
|
|
|
|
for L1TF applies.
|
|
|
|
See :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst <default_mitigations>`.
|