android_kernel_xiaomi_sm8350/drivers/scsi/qla4xxx/ql4_glbl.h

81 lines
3.3 KiB
C
Raw Normal View History

/*
* QLogic iSCSI HBA Driver
* Copyright (c) 2003-2006 QLogic Corporation
*
* See LICENSE.qla4xxx for copyright and licensing details.
*/
#ifndef __QLA4x_GBL_H
#define __QLA4x_GBL_H
int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a);
int qla4xxx_send_tgts(struct scsi_qla_host *ha, char *ip, uint16_t port);
int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb);
int qla4xxx_initialize_adapter(struct scsi_qla_host * ha,
uint8_t renew_ddb_list);
int qla4xxx_soft_reset(struct scsi_qla_host *ha);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id);
void qla4xxx_free_ddb_list(struct scsi_qla_host * ha);
void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen);
int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha);
int qla4xxx_relogin_device(struct scsi_qla_host * ha,
struct ddb_entry * ddb_entry);
int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
int lun);
int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr,
uint32_t offset, uint32_t len);
int qla4xxx_get_firmware_status(struct scsi_qla_host * ha);
int qla4xxx_get_firmware_state(struct scsi_qla_host * ha);
int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha);
/* FIXME: Goodness! this really wants a small struct to hold the
* parameters. On x86 the args will get passed on the stack! */
int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
uint16_t fw_ddb_index,
struct dev_db_entry *fw_ddb_entry,
dma_addr_t fw_ddb_entry_dma,
uint32_t *num_valid_ddb_entries,
uint32_t *next_ddb_index,
uint32_t *fw_ddb_device_state,
uint32_t *conn_err_detail,
uint16_t *tcp_source_port_num,
uint16_t *connection_id);
struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host * ha,
uint32_t fw_ddb_index);
int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index,
dma_addr_t fw_ddb_entry_dma);
void qla4xxx_mark_device_missing(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry);
u16 rd_nvram_word(struct scsi_qla_host * ha, int offset);
void qla4xxx_get_crash_record(struct scsi_qla_host * ha);
struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha);
int qla4xxx_add_sess(struct ddb_entry *);
void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry);
int qla4xxx_conn_close_sess_logout(struct scsi_qla_host * ha,
uint16_t fw_ddb_index,
uint16_t connection_id,
uint16_t option);
int qla4xxx_clear_database_entry(struct scsi_qla_host * ha,
uint16_t fw_ddb_index);
int qla4xxx_is_nvram_configuration_valid(struct scsi_qla_host * ha);
int qla4xxx_get_fw_version(struct scsi_qla_host * ha);
void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha,
uint32_t intr_status);
int qla4xxx_init_rings(struct scsi_qla_host * ha);
void qla4xxx_dump_buffer(void *b, uint32_t size);
struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index);
void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb);
int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host * ha);
int qla4xxx_process_ddb_changed(struct scsi_qla_host * ha,
uint32_t fw_ddb_index, uint32_t state);
extern int ql4xextended_error_logging;
extern int ql4xdiscoverywait;
extern int ql4xdontresethba;
extern int ql4_mod_unload;
#endif /* _QLA4x_GBL_H */