android_kernel_xiaomi_sm8350/arch/x86/mm/fault.c

1156 lines
26 KiB
C
Raw Normal View History

/*
* Copyright (C) 1995 Linus Torvalds
* Copyright (C) 2001, 2002 Andi Kleen, SuSE Labs.
*/
#include <linux/interrupt.h>
#include <linux/mmiotrace.h>
#include <linux/bootmem.h>
#include <linux/compiler.h>
#include <linux/highmem.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/vt_kern.h>
#include <linux/signal.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/string.h>
#include <linux/module.h>
#include <linux/kdebug.h>
#include <linux/errno.h>
#include <linux/magic.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/mman.h>
#include <linux/tty.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <asm-generic/sections.h>
#include <asm/tlbflush.h>
#include <asm/pgalloc.h>
#include <asm/segment.h>
#include <asm/system.h>
#include <asm/proto.h>
#include <asm/traps.h>
#include <asm/desc.h>
/*
* Page fault error code bits:
*
* bit 0 == 0: no page found 1: protection fault
* bit 1 == 0: read access 1: write access
* bit 2 == 0: kernel-mode access 1: user-mode access
* bit 3 == 1: use of reserved bit detected
* bit 4 == 1: fault was an instruction fetch
*/
enum x86_pf_error_code {
PF_PROT = 1 << 0,
PF_WRITE = 1 << 1,
PF_USER = 1 << 2,
PF_RSVD = 1 << 3,
PF_INSTR = 1 << 4,
};
x86: mmiotrace full patch, preview 1 kmmio.c handles the list of mmio probes with callbacks, list of traced pages, and attaching into the page fault handler and die notifier. It arms, traps and disarms the given pages, this is the core of mmiotrace. mmio-mod.c is a user interface, hooking into ioremap functions and registering the mmio probes. It also decodes the required information from trapped mmio accesses via the pre and post callbacks in each probe. Currently, hooking into ioremap functions works by redefining the symbols of the target (binary) kernel module, so that it calls the traced versions of the functions. The most notable changes done since the last discussion are: - kmmio.c is a built-in, not part of the module - direct call from fault.c to kmmio.c, removing all dynamic hooks - prepare for unregistering probes at any time - make kmmio re-initializable and accessible to more than one user - rewrite kmmio locking to remove all spinlocks from page fault path Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe() or is there a better way? The function called via call_rcu() itself calls call_rcu() again, will this work or break? There I need a second grace period for RCU after the first grace period for page faults. Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack that next. At some point I will start looking into how to make mmiotrace a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should make the user space part of mmiotracing as simple as 'cat /debug/trace/mmio > dump.txt'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 15:20:57 -04:00
static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
{
#ifdef CONFIG_MMIOTRACE
x86: mmiotrace full patch, preview 1 kmmio.c handles the list of mmio probes with callbacks, list of traced pages, and attaching into the page fault handler and die notifier. It arms, traps and disarms the given pages, this is the core of mmiotrace. mmio-mod.c is a user interface, hooking into ioremap functions and registering the mmio probes. It also decodes the required information from trapped mmio accesses via the pre and post callbacks in each probe. Currently, hooking into ioremap functions works by redefining the symbols of the target (binary) kernel module, so that it calls the traced versions of the functions. The most notable changes done since the last discussion are: - kmmio.c is a built-in, not part of the module - direct call from fault.c to kmmio.c, removing all dynamic hooks - prepare for unregistering probes at any time - make kmmio re-initializable and accessible to more than one user - rewrite kmmio locking to remove all spinlocks from page fault path Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe() or is there a better way? The function called via call_rcu() itself calls call_rcu() again, will this work or break? There I need a second grace period for RCU after the first grace period for page faults. Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack that next. At some point I will start looking into how to make mmiotrace a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should make the user space part of mmiotracing as simple as 'cat /debug/trace/mmio > dump.txt'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 15:20:57 -04:00
if (unlikely(is_kmmio_active()))
if (kmmio_handler(regs, addr) == 1)
return -1;
#endif
x86: mmiotrace full patch, preview 1 kmmio.c handles the list of mmio probes with callbacks, list of traced pages, and attaching into the page fault handler and die notifier. It arms, traps and disarms the given pages, this is the core of mmiotrace. mmio-mod.c is a user interface, hooking into ioremap functions and registering the mmio probes. It also decodes the required information from trapped mmio accesses via the pre and post callbacks in each probe. Currently, hooking into ioremap functions works by redefining the symbols of the target (binary) kernel module, so that it calls the traced versions of the functions. The most notable changes done since the last discussion are: - kmmio.c is a built-in, not part of the module - direct call from fault.c to kmmio.c, removing all dynamic hooks - prepare for unregistering probes at any time - make kmmio re-initializable and accessible to more than one user - rewrite kmmio locking to remove all spinlocks from page fault path Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe() or is there a better way? The function called via call_rcu() itself calls call_rcu() again, will this work or break? There I need a second grace period for RCU after the first grace period for page faults. Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack that next. At some point I will start looking into how to make mmiotrace a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should make the user space part of mmiotracing as simple as 'cat /debug/trace/mmio > dump.txt'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 15:20:57 -04:00
return 0;
}
static inline int notify_page_fault(struct pt_regs *regs)
[PATCH] Notify page fault call chain for x86_64 Currently in the do_page_fault() code path, we call notify_die(DIE_PAGE_FAULT, ...) to notify the page fault. Since notify_die() is highly overloaded, this page fault notification is currently being sent to all the components registered with register_die_notification() which uses the same die_chain to loop for all the registered components which is unnecessary. In order to optimize the do_page_fault() code path, this critical page fault notification is now moved to different call chain and the test results showed great improvements. And the kprobes which is interested in this notifications, now registers onto this new call chain only when it need to, i.e Kprobes now registers for page fault notification only when their are an active probes and unregisters from this page fault notification when no probes are active. I have incorporated all the feedback given by Ananth and Keith and everyone, and thanks for all the review feedback. This patch: Overloading of page fault notification with the notify_die() has performance issues(since the only interested components for page fault is kprobes and/or kdb) and hence this patch introduces the new notifier call chain exclusively for page fault notifications their by avoiding notifying unnecessary components in the do_page_fault() code path. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 03:25:25 -04:00
{
#ifdef CONFIG_KPROBES
int ret = 0;
/* kprobe_running() needs smp_processor_id() */
if (!user_mode_vm(regs)) {
preempt_disable();
if (kprobe_running() && kprobe_fault_handler(regs, 14))
ret = 1;
preempt_enable();
}
[PATCH] Notify page fault call chain for x86_64 Currently in the do_page_fault() code path, we call notify_die(DIE_PAGE_FAULT, ...) to notify the page fault. Since notify_die() is highly overloaded, this page fault notification is currently being sent to all the components registered with register_die_notification() which uses the same die_chain to loop for all the registered components which is unnecessary. In order to optimize the do_page_fault() code path, this critical page fault notification is now moved to different call chain and the test results showed great improvements. And the kprobes which is interested in this notifications, now registers onto this new call chain only when it need to, i.e Kprobes now registers for page fault notification only when their are an active probes and unregisters from this page fault notification when no probes are active. I have incorporated all the feedback given by Ananth and Keith and everyone, and thanks for all the review feedback. This patch: Overloading of page fault notification with the notify_die() has performance issues(since the only interested components for page fault is kprobes and/or kdb) and hence this patch introduces the new notifier call chain exclusively for page fault notifications their by avoiding notifying unnecessary components in the do_page_fault() code path. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 03:25:25 -04:00
return ret;
#else
return 0;
#endif
}
[PATCH] Notify page fault call chain for x86_64 Currently in the do_page_fault() code path, we call notify_die(DIE_PAGE_FAULT, ...) to notify the page fault. Since notify_die() is highly overloaded, this page fault notification is currently being sent to all the components registered with register_die_notification() which uses the same die_chain to loop for all the registered components which is unnecessary. In order to optimize the do_page_fault() code path, this critical page fault notification is now moved to different call chain and the test results showed great improvements. And the kprobes which is interested in this notifications, now registers onto this new call chain only when it need to, i.e Kprobes now registers for page fault notification only when their are an active probes and unregisters from this page fault notification when no probes are active. I have incorporated all the feedback given by Ananth and Keith and everyone, and thanks for all the review feedback. This patch: Overloading of page fault notification with the notify_die() has performance issues(since the only interested components for page fault is kprobes and/or kdb) and hence this patch introduces the new notifier call chain exclusively for page fault notifications their by avoiding notifying unnecessary components in the do_page_fault() code path. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 03:25:25 -04:00
/*
* Prefetch quirks:
*
* 32-bit mode:
*
* Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
* Check that here and ignore it.
*
* 64-bit mode:
*
* Sometimes the CPU reports invalid exceptions on prefetch.
* Check that here and ignore it.
*
* Opcode checker based on code by Richard Brunner.
*/
static int
is_prefetch(struct pt_regs *regs, unsigned long error_code, unsigned long addr)
{
unsigned char *max_instr;
unsigned char *instr;
int scan_more = 1;
int prefetch = 0;
/*
* If it was a exec (instruction fetch) fault on NX page, then
* do not ignore the fault:
*/
if (error_code & PF_INSTR)
return 0;
instr = (unsigned char *)convert_ip_to_linear(current, regs);
max_instr = instr + 15;
if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
return 0;
while (scan_more && instr < max_instr) {
unsigned char instr_hi;
unsigned char instr_lo;
unsigned char opcode;
if (probe_kernel_address(instr, opcode))
break;
instr_hi = opcode & 0xf0;
instr_lo = opcode & 0x0f;
instr++;
switch (instr_hi) {
case 0x20:
case 0x30:
/*
* Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
* In X86_64 long mode, the CPU will signal invalid
* opcode if some of these prefixes are present so
* X86_64 will never get here anyway
*/
scan_more = ((instr_lo & 7) == 0x6);
break;
#ifdef CONFIG_X86_64
case 0x40:
/*
* In AMD64 long mode 0x40..0x4F are valid REX prefixes
* Need to figure out under what instruction mode the
* instruction was issued. Could check the LDT for lm,
* but for now it's good enough to assume that long
* mode only uses well known segments or kernel.
*/
scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS);
break;
#endif
case 0x60:
/* 0x64 thru 0x67 are valid prefixes in all modes. */
scan_more = (instr_lo & 0xC) == 0x4;
break;
case 0xF0:
/* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
scan_more = !instr_lo || (instr_lo>>1) == 1;
break;
case 0x00:
/* Prefetch instruction is 0x0F0D or 0x0F18 */
scan_more = 0;
if (probe_kernel_address(instr, opcode))
break;
prefetch = (instr_lo == 0xF) &&
(opcode == 0x0D || opcode == 0x18);
break;
default:
scan_more = 0;
break;
}
}
return prefetch;
}
static void
force_sig_info_fault(int si_signo, int si_code, unsigned long address,
struct task_struct *tsk)
{
siginfo_t info;
info.si_signo = si_signo;
info.si_errno = 0;
info.si_code = si_code;
info.si_addr = (void __user *)address;
force_sig_info(si_signo, &info, tsk);
}
#ifdef CONFIG_X86_64
static int bad_address(void *p)
{
unsigned long dummy;
return probe_kernel_address((unsigned long *)p, dummy);
}
#endif
static void dump_pagetable(unsigned long address)
{
#ifdef CONFIG_X86_32
__typeof__(pte_val(__pte(0))) page;
page = read_cr3();
page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
#ifdef CONFIG_X86_PAE
printk("*pdpt = %016Lx ", page);
if ((page >> PAGE_SHIFT) < max_low_pfn
&& page & _PAGE_PRESENT) {
page &= PAGE_MASK;
page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
& (PTRS_PER_PMD - 1)];
printk(KERN_CONT "*pde = %016Lx ", page);
page &= ~_PAGE_NX;
}
#else
printk("*pde = %08lx ", page);
#endif
/*
* We must not directly access the pte in the highpte
* case if the page table is located in highmem.
* And let's rather not kmap-atomic the pte, just in case
* it's allocated already:
*/
if ((page >> PAGE_SHIFT) < max_low_pfn
&& (page & _PAGE_PRESENT)
&& !(page & _PAGE_PSE)) {
page &= PAGE_MASK;
page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
& (PTRS_PER_PTE - 1)];
printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
}
printk("\n");
#else /* CONFIG_X86_64 */
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
pgd = (pgd_t *)read_cr3();
pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
pgd += pgd_index(address);
if (bad_address(pgd))
goto bad;
printk("PGD %lx ", pgd_val(*pgd));
if (!pgd_present(*pgd))
goto out;
pud = pud_offset(pgd, address);
if (bad_address(pud))
goto bad;
printk("PUD %lx ", pud_val(*pud));
if (!pud_present(*pud) || pud_large(*pud))
goto out;
pmd = pmd_offset(pud, address);
if (bad_address(pmd))
goto bad;
printk("PMD %lx ", pmd_val(*pmd));
if (!pmd_present(*pmd) || pmd_large(*pmd))
goto out;
pte = pte_offset_kernel(pmd, address);
if (bad_address(pte))
goto bad;
printk("PTE %lx", pte_val(*pte));
out:
printk("\n");
return;
bad:
printk("BAD\n");
#endif
}
#ifdef CONFIG_X86_32
static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
{
unsigned index = pgd_index(address);
pgd_t *pgd_k;
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pgd += index;
pgd_k = init_mm.pgd + index;
if (!pgd_present(*pgd_k))
return NULL;
/*
* set_pgd(pgd, *pgd_k); here would be useless on PAE
* and redundant with the set_pmd() on non-PAE. As would
* set_pud.
*/
pud = pud_offset(pgd, address);
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
return NULL;
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
return NULL;
if (!pmd_present(*pmd)) {
set_pmd(pmd, *pmd_k);
arch_flush_lazy_mmu_mode();
} else {
BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
}
return pmd_k;
}
#endif
#ifdef CONFIG_X86_64
static const char errata93_warning[] =
KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
KERN_ERR "******* Please consider a BIOS update.\n"
KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
#endif
/*
* Workaround for K8 erratum #93 & buggy BIOS.
*
* BIOS SMM functions are required to use a specific workaround
* to avoid corruption of the 64bit RIP register on C stepping K8.
*
* A lot of BIOS that didn't get tested properly miss this.
*
* The OS sees this as a page fault with the upper 32bits of RIP cleared.
* Try to work around it here.
*
* Note we only handle faults in kernel here.
* Does nothing on 32-bit.
*/
static int is_errata93(struct pt_regs *regs, unsigned long address)
{
#ifdef CONFIG_X86_64
static int once;
if (address != regs->ip)
return 0;
if ((address >> 32) != 0)
return 0;
address |= 0xffffffffUL << 32;
if ((address >= (u64)_stext && address <= (u64)_etext) ||
(address >= MODULES_VADDR && address <= MODULES_END)) {
if (!once) {
printk(errata93_warning);
once = 1;
}
regs->ip = address;
return 1;
}
#endif
return 0;
}
/*
* Work around K8 erratum #100 K8 in compat mode occasionally jumps
* to illegal addresses >4GB.
*
* We catch this in the page fault handler because these addresses
* are not reachable. Just detect this case and return. Any code
* segment in LDT is compatibility mode.
*/
static int is_errata100(struct pt_regs *regs, unsigned long address)
{
#ifdef CONFIG_X86_64
if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) && (address >> 32))
return 1;
#endif
return 0;
}
static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
{
#ifdef CONFIG_X86_F00F_BUG
unsigned long nr;
/*
* Pentium F0 0F C7 C8 bug workaround:
*/
if (boot_cpu_data.f00f_bug) {
nr = (address - idt_descr.address) >> 3;
if (nr == 6) {
do_invalid_op(regs, 0);
return 1;
}
}
#endif
return 0;
}
static void
show_fault_oops(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
{
#ifdef CONFIG_X86_32
if (!oops_may_print())
return;
#endif
#ifdef CONFIG_X86_PAE
if (error_code & PF_INSTR) {
unsigned int level;
pte_t *pte = lookup_address(address, &level);
if (pte && pte_present(*pte) && !pte_exec(*pte)) {
printk(KERN_CRIT "kernel tried to execute "
"NX-protected page - exploit attempt? "
"(uid: %d)\n", current_uid());
}
}
#endif
printk(KERN_ALERT "BUG: unable to handle kernel ");
if (address < PAGE_SIZE)
printk(KERN_CONT "NULL pointer dereference");
else
printk(KERN_CONT "paging request");
printk(KERN_CONT " at %p\n", (void *) address);
printk(KERN_ALERT "IP:");
printk_address(regs->ip, 1);
dump_pagetable(address);
}
#ifdef CONFIG_X86_64
static noinline void
pgtable_bad(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
{
struct task_struct *tsk;
unsigned long flags;
int sig;
flags = oops_begin();
tsk = current;
sig = SIGKILL;
printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
tsk->comm, address);
dump_pagetable(address);
tsk->thread.cr2 = address;
tsk->thread.trap_no = 14;
tsk->thread.error_code = error_code;
if (__die("Bad pagetable", regs, error_code))
sig = 0;
oops_end(flags, regs, sig);
}
#endif
static noinline void
no_context(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
struct task_struct *tsk = current;
unsigned long *stackend;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
#ifdef CONFIG_X86_64
unsigned long flags;
int sig;
#endif
/* Are we prepared to handle this kernel fault? */
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (fixup_exception(regs))
return;
/*
* 32-bit:
*
* Valid to do another page fault here, because if this fault
* had been triggered by is_prefetch fixup_exception would have
* handled it.
*
* 64-bit:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
*
* Hall of shame of CPU/BIOS bugs.
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
*/
if (is_prefetch(regs, error_code, address))
return;
if (is_errata93(regs, address))
return;
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
*/
#ifdef CONFIG_X86_32
bust_spinlocks(1);
#else
flags = oops_begin();
#endif
show_fault_oops(regs, error_code, address);
stackend = end_of_stack(tsk);
if (*stackend != STACK_END_MAGIC)
printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
tsk->thread.cr2 = address;
tsk->thread.trap_no = 14;
tsk->thread.error_code = error_code;
#ifdef CONFIG_X86_32
die("Oops", regs, error_code);
bust_spinlocks(0);
do_exit(SIGKILL);
#else
sig = SIGKILL;
if (__die("Oops", regs, error_code))
sig = 0;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
/* Executive summary in case the body of the oops scrolled away */
printk(KERN_EMERG "CR2: %016lx\n", address);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
oops_end(flags, regs, sig);
#endif
}
/*
* Print out info about fatal segfaults, if the show_unhandled_signals
* sysctl is set:
*/
static inline void
show_signal_msg(struct pt_regs *regs, unsigned long error_code,
unsigned long address, struct task_struct *tsk)
{
if (!unhandled_signal(tsk, SIGSEGV))
return;
if (!printk_ratelimit())
return;
printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
tsk->comm, task_pid_nr(tsk), address,
(void *)regs->ip, (void *)regs->sp, error_code);
print_vma_addr(KERN_CONT " in ", regs->ip);
printk(KERN_CONT "\n");
}
static void
__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
unsigned long address, int si_code)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
struct task_struct *tsk = current;
/* User mode accesses just cause a SIGSEGV */
if (error_code & PF_USER) {
/*
* It's possible to have interrupts off here:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
*/
local_irq_enable();
/*
* Valid to do another page fault here because this one came
* from user space:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
*/
if (is_prefetch(regs, error_code, address))
return;
if (is_errata100(regs, address))
return;
if (unlikely(show_unhandled_signals))
show_signal_msg(regs, error_code, address, tsk);
/* Kernel addresses are always protection faults: */
tsk->thread.cr2 = address;
tsk->thread.error_code = error_code | (address >= TASK_SIZE);
tsk->thread.trap_no = 14;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
force_sig_info_fault(SIGSEGV, si_code, address, tsk);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
return;
}
if (is_f00f_bug(regs, address))
return;
no_context(regs, error_code, address);
}
static noinline void
bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
__bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
}
static void
__bad_area(struct pt_regs *regs, unsigned long error_code,
unsigned long address, int si_code)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
struct mm_struct *mm = current->mm;
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
up_read(&mm->mmap_sem);
__bad_area_nosemaphore(regs, error_code, address, si_code);
}
static noinline void
bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
__bad_area(regs, error_code, address, SEGV_MAPERR);
}
static noinline void
bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
__bad_area(regs, error_code, address, SEGV_ACCERR);
}
/* TODO: fixup for "mm-invoke-oom-killer-from-page-fault.patch" */
static void
out_of_memory(struct pt_regs *regs, unsigned long error_code,
unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
/*
* We ran out of memory, call the OOM killer, and return the userspace
* (which will retry the fault, or kill us if we got oom-killed):
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
*/
up_read(&current->mm->mmap_sem);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
pagefault_out_of_memory();
}
static void
do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
up_read(&mm->mmap_sem);
/* Kernel mode? Handle exceptions or die: */
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (!(error_code & PF_USER))
no_context(regs, error_code, address);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
#ifdef CONFIG_X86_32
/* User space => ok to do another page fault: */
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (is_prefetch(regs, error_code, address))
return;
#endif
tsk->thread.cr2 = address;
tsk->thread.error_code = error_code;
tsk->thread.trap_no = 14;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
}
static noinline void
mm_fault_error(struct pt_regs *regs, unsigned long error_code,
unsigned long address, unsigned int fault)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
if (fault & VM_FAULT_OOM) {
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
out_of_memory(regs, error_code, address);
} else {
if (fault & VM_FAULT_SIGBUS)
do_sigbus(regs, error_code, address);
else
BUG();
}
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
}
static int spurious_fault_check(unsigned long error_code, pte_t *pte)
{
if ((error_code & PF_WRITE) && !pte_write(*pte))
return 0;
if ((error_code & PF_INSTR) && !pte_exec(*pte))
return 0;
return 1;
}
/*
* Handle a spurious fault caused by a stale TLB entry.
*
* This allows us to lazily refresh the TLB when increasing the
* permissions of a kernel page (RO -> RW or NX -> X). Doing it
* eagerly is very expensive since that implies doing a full
* cross-processor TLB flush, even if no stale TLB entries exist
* on other processors.
*
* There are no security implications to leaving a stale TLB when
* increasing the permissions on a page.
*/
static noinline int
spurious_fault(unsigned long error_code, unsigned long address)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
int ret;
/* Reserved-bit violation or user access to kernel space? */
if (error_code & (PF_USER | PF_RSVD))
return 0;
pgd = init_mm.pgd + pgd_index(address);
if (!pgd_present(*pgd))
return 0;
pud = pud_offset(pgd, address);
if (!pud_present(*pud))
return 0;
if (pud_large(*pud))
return spurious_fault_check(error_code, (pte_t *) pud);
pmd = pmd_offset(pud, address);
if (!pmd_present(*pmd))
return 0;
if (pmd_large(*pmd))
return spurious_fault_check(error_code, (pte_t *) pmd);
pte = pte_offset_kernel(pmd, address);
if (!pte_present(*pte))
return 0;
ret = spurious_fault_check(error_code, pte);
if (!ret)
return 0;
/*
* Make sure we have permissions in PMD.
* If not, then there's a bug in the page tables:
*/
ret = spurious_fault_check(error_code, (pte_t *) pmd);
WARN_ONCE(!ret, "PMD has incorrect permission bits\n");
return ret;
}
/*
* 32-bit:
*
* Handle a fault on the vmalloc or module mapping area
*
* 64-bit:
*
* Handle a fault on the vmalloc area
*
* This assumes no large pages in there.
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
static noinline int vmalloc_fault(unsigned long address)
{
#ifdef CONFIG_X86_32
unsigned long pgd_paddr;
pmd_t *pmd_k;
pte_t *pte_k;
x86: fix endless page faults in mount_block_root for Linux 2.6 Page faults in kernel address space between PAGE_OFFSET up to VMALLOC_START should not try to map as vmalloc. Fix rarely endless page faults inside mount_block_root for root filesystem at boot time. All 32bit kernels up to 2.6.25 can fail into this hole. I can not present this under native linux kernel. I see, that the 64bit has fixed the problem. I copied the same lines into 32bit part. Recorded debugs are from coLinux kernel 2.6.22.18 (virtualisation): http://www.henrynestler.com/colinux/testing/pfn-check-0.7.3/20080410-antinx/bug16-recursive-page-fault-endless.txt The physicaly memory was trimmed down to 192MB to better catch the bug. More memory gets the bug more rarely. Details, how every x86 32bit system can fail: Start from "mount_block_root", http://lxr.linux.no/linux/init/do_mounts.c#L297 There the variable "fs_names" got one memory page with 4096 bytes. Variable "p" walks through the existing file system types. The first string is no problem. But, with the second loop in mount_block_root the offset of "p" is not at beginning of page, the offset is for example +9, if "reiserfs" is the first in list. Than calls do_mount_root, and lands in sys_mount. Remember: Variable "type_page" contains now "fs_type+9" and not contains a full page. The sys_mount copies 4096 bytes with function "exact_copy_from_user()": http://lxr.linux.no/linux/fs/namespace.c#L1540 Mostly exist pages after the buffer "fs_names+4096+9" and the page fault handler was not called. No problem. In the case, if the page after "fs_names+4096" is not mapped, the page fault handler was called from http://lxr.linux.no/linux/fs/namespace.c#L1320 The do_page_fault gots an address 0xc03b4000. It's kernel address, address >= TASK_SIZE, but not from vmalloc! It's from "__getname()" alias "kmem_cache_alloc". The "error_code" is 0. "vmalloc_fault" will be call: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L332 "vmalloc_fault" tryed to find the physical page for a non existing virtual memory area. The macro "pte_present" in vmalloc_fault() got a next page fault for 0xc0000ed0 at: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L282 No PTE exist for such virtual address. The page fault handler was trying to sync the physical page for the PTE lockup. This called vmalloc_fault() again for address 0xc000000, and that also was not existing. The endless began... In normal case the cpu would still loop with disabled interrrupts. Under coLinux this was catched by a stack overflow inside printk debugs. Signed-off-by: Henry Nestler <henry.nestler@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 09:44:39 -04:00
/* Make sure we are in vmalloc area: */
x86: fix endless page faults in mount_block_root for Linux 2.6 Page faults in kernel address space between PAGE_OFFSET up to VMALLOC_START should not try to map as vmalloc. Fix rarely endless page faults inside mount_block_root for root filesystem at boot time. All 32bit kernels up to 2.6.25 can fail into this hole. I can not present this under native linux kernel. I see, that the 64bit has fixed the problem. I copied the same lines into 32bit part. Recorded debugs are from coLinux kernel 2.6.22.18 (virtualisation): http://www.henrynestler.com/colinux/testing/pfn-check-0.7.3/20080410-antinx/bug16-recursive-page-fault-endless.txt The physicaly memory was trimmed down to 192MB to better catch the bug. More memory gets the bug more rarely. Details, how every x86 32bit system can fail: Start from "mount_block_root", http://lxr.linux.no/linux/init/do_mounts.c#L297 There the variable "fs_names" got one memory page with 4096 bytes. Variable "p" walks through the existing file system types. The first string is no problem. But, with the second loop in mount_block_root the offset of "p" is not at beginning of page, the offset is for example +9, if "reiserfs" is the first in list. Than calls do_mount_root, and lands in sys_mount. Remember: Variable "type_page" contains now "fs_type+9" and not contains a full page. The sys_mount copies 4096 bytes with function "exact_copy_from_user()": http://lxr.linux.no/linux/fs/namespace.c#L1540 Mostly exist pages after the buffer "fs_names+4096+9" and the page fault handler was not called. No problem. In the case, if the page after "fs_names+4096" is not mapped, the page fault handler was called from http://lxr.linux.no/linux/fs/namespace.c#L1320 The do_page_fault gots an address 0xc03b4000. It's kernel address, address >= TASK_SIZE, but not from vmalloc! It's from "__getname()" alias "kmem_cache_alloc". The "error_code" is 0. "vmalloc_fault" will be call: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L332 "vmalloc_fault" tryed to find the physical page for a non existing virtual memory area. The macro "pte_present" in vmalloc_fault() got a next page fault for 0xc0000ed0 at: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L282 No PTE exist for such virtual address. The page fault handler was trying to sync the physical page for the PTE lockup. This called vmalloc_fault() again for address 0xc000000, and that also was not existing. The endless began... In normal case the cpu would still loop with disabled interrrupts. Under coLinux this was catched by a stack overflow inside printk debugs. Signed-off-by: Henry Nestler <henry.nestler@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 09:44:39 -04:00
if (!(address >= VMALLOC_START && address < VMALLOC_END))
return -1;
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*
* Do _not_ use "current" here. We might be inside
* an interrupt in the middle of a task switch..
*/
pgd_paddr = read_cr3();
pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
if (!pmd_k)
return -1;
pte_k = pte_offset_kernel(pmd_k, address);
if (!pte_present(*pte_k))
return -1;
return 0;
#else
pgd_t *pgd, *pgd_ref;
pud_t *pud, *pud_ref;
pmd_t *pmd, *pmd_ref;
pte_t *pte, *pte_ref;
/* Make sure we are in vmalloc area: */
if (!(address >= VMALLOC_START && address < VMALLOC_END))
return -1;
/*
* Copy kernel mappings over when needed. This can also
* happen within a race in page table update. In the later
* case just flush:
*/
pgd = pgd_offset(current->active_mm, address);
pgd_ref = pgd_offset_k(address);
if (pgd_none(*pgd_ref))
return -1;
if (pgd_none(*pgd))
set_pgd(pgd, *pgd_ref);
else
BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
/*
* Below here mismatches are bugs because these lower tables
* are shared:
*/
pud = pud_offset(pgd, address);
pud_ref = pud_offset(pgd_ref, address);
if (pud_none(*pud_ref))
return -1;
if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
BUG();
pmd = pmd_offset(pud, address);
pmd_ref = pmd_offset(pud_ref, address);
if (pmd_none(*pmd_ref))
return -1;
if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
BUG();
pte_ref = pte_offset_kernel(pmd_ref, address);
if (!pte_present(*pte_ref))
return -1;
pte = pte_offset_kernel(pmd, address);
/*
* Don't use pte_page here, because the mappings can point
* outside mem_map, and the NUMA hash lookup cannot handle
* that:
*/
if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
BUG();
return 0;
#endif
}
int show_unhandled_signals = 1;
static inline int
access_error(unsigned long error_code, int write, struct vm_area_struct *vma)
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
{
if (write) {
/* write, present and write, not present: */
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (unlikely(!(vma->vm_flags & VM_WRITE)))
return 1;
return 0;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
}
/* read, present: */
if (unlikely(error_code & PF_PROT))
return 1;
/* read, not present: */
if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
return 1;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
return 0;
}
static int fault_in_kernel_space(unsigned long address)
{
#ifdef CONFIG_X86_32
return address >= TASK_SIZE;
#else
return address >= TASK_SIZE64;
#endif
}
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*/
#ifdef CONFIG_X86_64
asmlinkage
#endif
void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
{
struct vm_area_struct *vma;
struct task_struct *tsk;
unsigned long address;
struct mm_struct *mm;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
int write;
int fault;
tsk = current;
mm = tsk->mm;
prefetchw(&mm->mmap_sem);
/* Get the faulting address: */
address = read_cr2();
x86: mmiotrace full patch, preview 1 kmmio.c handles the list of mmio probes with callbacks, list of traced pages, and attaching into the page fault handler and die notifier. It arms, traps and disarms the given pages, this is the core of mmiotrace. mmio-mod.c is a user interface, hooking into ioremap functions and registering the mmio probes. It also decodes the required information from trapped mmio accesses via the pre and post callbacks in each probe. Currently, hooking into ioremap functions works by redefining the symbols of the target (binary) kernel module, so that it calls the traced versions of the functions. The most notable changes done since the last discussion are: - kmmio.c is a built-in, not part of the module - direct call from fault.c to kmmio.c, removing all dynamic hooks - prepare for unregistering probes at any time - make kmmio re-initializable and accessible to more than one user - rewrite kmmio locking to remove all spinlocks from page fault path Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe() or is there a better way? The function called via call_rcu() itself calls call_rcu() again, will this work or break? There I need a second grace period for RCU after the first grace period for page faults. Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack that next. At some point I will start looking into how to make mmiotrace a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should make the user space part of mmiotracing as simple as 'cat /debug/trace/mmio > dump.txt'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 15:20:57 -04:00
if (unlikely(kmmio_fault(regs, address)))
return;
/*
* We fault-in kernel-space virtual memory on-demand. The
* 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*
* This verifies that the fault happens in kernel space
* (error_code & 4) == 0, and that the fault was not a
* protection error (error_code & 9) == 0.
*/
if (unlikely(fault_in_kernel_space(address))) {
if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
vmalloc_fault(address) >= 0)
return;
/* Can handle a stale RO->RW TLB: */
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (spurious_fault(error_code, address))
return;
/* kprobes don't want to hook the spurious faults: */
if (notify_page_fault(regs))
return;
/*
* Don't take the mm semaphore here. If we fixup a prefetch
* fault we could otherwise deadlock:
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
bad_area_nosemaphore(regs, error_code, address);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
return;
}
/* kprobes don't want to hook the spurious faults: */
if (unlikely(notify_page_fault(regs)))
return;
/*
* It's safe to allow irq's after cr2 has been saved and the
* vmalloc fault has been handled.
*
* User-mode registers count as a user access even for any
* potential system fault or CPU buglet:
*/
if (user_mode_vm(regs)) {
local_irq_enable();
error_code |= PF_USER;
} else {
if (regs->flags & X86_EFLAGS_IF)
local_irq_enable();
}
#ifdef CONFIG_X86_64
if (unlikely(error_code & PF_RSVD))
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
pgtable_bad(regs, error_code, address);
#endif
/*
* If we're in an interrupt, have no user context or are running
* in an atomic region then we must not take the fault:
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (unlikely(in_atomic() || !mm)) {
bad_area_nosemaphore(regs, error_code, address);
return;
}
/*
* When running in the kernel we expect faults to occur only to
* addresses in user space. All other faults represent errors in
* the kernel and should generate an OOPS. Unfortunately, in the
* case of an erroneous fault occurring in a code path which already
* holds mmap_sem we will deadlock attempting to validate the fault
* against the address space. Luckily the kernel only validly
* references user space from well defined areas of code, which are
* listed in the exceptions table.
*
* As the vast majority of faults will be valid we will only perform
* the source reference check when there is a possibility of a
* deadlock. Attempt to lock the address space, if we cannot we then
* validate the source. If this is invalid we can skip the address
* space check, thus avoiding the deadlock:
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
if ((error_code & PF_USER) == 0 &&
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
!search_exception_tables(regs->ip)) {
bad_area_nosemaphore(regs, error_code, address);
return;
}
down_read(&mm->mmap_sem);
} else {
/*
* The above down_read_trylock() might have succeeded in
* which case we'll have missed the might_sleep() from
* down_read():
*/
might_sleep();
}
vma = find_vma(mm, address);
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (unlikely(!vma)) {
bad_area(regs, error_code, address);
return;
}
if (likely(vma->vm_start <= address))
goto good_area;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
bad_area(regs, error_code, address);
return;
}
if (error_code & PF_USER) {
/*
* Accessing the stack below %sp is always a bug.
* The large cushion allows instructions like enter
* and pusha to work. ("enter $65535, $31" pushes
* 32 pointers and then decrements %sp by 65535.)
*/
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (unlikely(address + 65536 + 32 * sizeof(unsigned long) < regs->sp)) {
bad_area(regs, error_code, address);
return;
}
}
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (unlikely(expand_stack(vma, address))) {
bad_area(regs, error_code, address);
return;
}
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
write = error_code & PF_WRITE;
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
if (unlikely(access_error(error_code, write, vma))) {
bad_area_access_error(regs, error_code, address);
return;
}
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault:
*/
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 04:47:05 -04:00
fault = handle_mm_fault(mm, vma, address, write);
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 04:47:05 -04:00
if (unlikely(fault & VM_FAULT_ERROR)) {
x86: optimise x86's do_page_fault (C entry point for the page fault path) Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19 22:24:26 -05:00
mm_fault_error(regs, error_code, address, fault);
return;
}
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 04:47:05 -04:00
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
#ifdef CONFIG_X86_32
/*
* Did it hit the DOS screen memory VA from vm86 mode?
*/
if (v8086_mode(regs)) {
unsigned long bit = (address - 0xA0000) >> PAGE_SHIFT;
if (bit < 32)
tsk->thread.screen_bitmap |= 1 << bit;
}
#endif
up_read(&mm->mmap_sem);
}
DEFINE_SPINLOCK(pgd_lock);
LIST_HEAD(pgd_list);
void vmalloc_sync_all(void)
{
unsigned long address;
#ifdef CONFIG_X86_32
if (SHARED_KERNEL_PMD)
return;
for (address = VMALLOC_START & PMD_MASK;
address >= TASK_SIZE && address < FIXADDR_TOP;
address += PMD_SIZE) {
unsigned long flags;
struct page *page;
spin_lock_irqsave(&pgd_lock, flags);
list_for_each_entry(page, &pgd_list, lru) {
if (!vmalloc_sync_one(page_address(page), address))
break;
}
spin_unlock_irqrestore(&pgd_lock, flags);
}
#else /* CONFIG_X86_64 */
for (address = VMALLOC_START & PGDIR_MASK; address <= VMALLOC_END;
address += PGDIR_SIZE) {
const pgd_t *pgd_ref = pgd_offset_k(address);
unsigned long flags;
struct page *page;
if (pgd_none(*pgd_ref))
continue;
spin_lock_irqsave(&pgd_lock, flags);
list_for_each_entry(page, &pgd_list, lru) {
pgd_t *pgd;
pgd = (pgd_t *)page_address(page) + pgd_index(address);
if (pgd_none(*pgd))
set_pgd(pgd, *pgd_ref);
else
BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
}
spin_unlock_irqrestore(&pgd_lock, flags);
}
#endif
}