[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
/*
|
|
|
|
* include/asm-powerpc/immap_qe.h
|
|
|
|
*
|
|
|
|
* QUICC Engine (QE) Internal Memory Map.
|
|
|
|
* The Internal Memory Map for devices with QE on them. This
|
|
|
|
* is the superset of all QE devices (8360, etc.).
|
|
|
|
|
|
|
|
* Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
|
|
|
|
*
|
|
|
|
* Authors: Shlomi Gridish <gridish@freescale.com>
|
|
|
|
* Li Yang <leoli@freescale.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*/
|
|
|
|
#ifndef _ASM_POWERPC_IMMAP_QE_H
|
|
|
|
#define _ASM_POWERPC_IMMAP_QE_H
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
|
|
|
|
#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
|
|
|
|
|
|
|
|
/* QE I-RAM */
|
|
|
|
struct qe_iram {
|
|
|
|
__be32 iadd; /* I-RAM Address Register */
|
|
|
|
__be32 idata; /* I-RAM Data Register */
|
|
|
|
u8 res0[0x78];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* QE Interrupt Controller */
|
|
|
|
struct qe_ic_regs {
|
|
|
|
__be32 qicr;
|
|
|
|
__be32 qivec;
|
|
|
|
__be32 qripnr;
|
|
|
|
__be32 qipnr;
|
|
|
|
__be32 qipxcc;
|
|
|
|
__be32 qipycc;
|
|
|
|
__be32 qipwcc;
|
|
|
|
__be32 qipzcc;
|
|
|
|
__be32 qimr;
|
|
|
|
__be32 qrimr;
|
|
|
|
__be32 qicnr;
|
|
|
|
u8 res0[0x4];
|
|
|
|
__be32 qiprta;
|
|
|
|
__be32 qiprtb;
|
|
|
|
u8 res1[0x4];
|
|
|
|
__be32 qricr;
|
|
|
|
u8 res2[0x20];
|
|
|
|
__be32 qhivec;
|
|
|
|
u8 res3[0x1C];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* Communications Processor */
|
|
|
|
struct cp_qe {
|
|
|
|
__be32 cecr; /* QE command register */
|
|
|
|
__be32 ceccr; /* QE controller configuration register */
|
|
|
|
__be32 cecdr; /* QE command data register */
|
|
|
|
u8 res0[0xA];
|
|
|
|
__be16 ceter; /* QE timer event register */
|
|
|
|
u8 res1[0x2];
|
|
|
|
__be16 cetmr; /* QE timers mask register */
|
|
|
|
__be32 cetscr; /* QE time-stamp timer control register */
|
|
|
|
__be32 cetsr1; /* QE time-stamp register 1 */
|
|
|
|
__be32 cetsr2; /* QE time-stamp register 2 */
|
|
|
|
u8 res2[0x8];
|
|
|
|
__be32 cevter; /* QE virtual tasks event register */
|
|
|
|
__be32 cevtmr; /* QE virtual tasks mask register */
|
|
|
|
__be16 cercr; /* QE RAM control register */
|
|
|
|
u8 res3[0x2];
|
|
|
|
u8 res4[0x24];
|
|
|
|
__be16 ceexe1; /* QE external request 1 event register */
|
|
|
|
u8 res5[0x2];
|
|
|
|
__be16 ceexm1; /* QE external request 1 mask register */
|
|
|
|
u8 res6[0x2];
|
|
|
|
__be16 ceexe2; /* QE external request 2 event register */
|
|
|
|
u8 res7[0x2];
|
|
|
|
__be16 ceexm2; /* QE external request 2 mask register */
|
|
|
|
u8 res8[0x2];
|
|
|
|
__be16 ceexe3; /* QE external request 3 event register */
|
|
|
|
u8 res9[0x2];
|
|
|
|
__be16 ceexm3; /* QE external request 3 mask register */
|
|
|
|
u8 res10[0x2];
|
|
|
|
__be16 ceexe4; /* QE external request 4 event register */
|
|
|
|
u8 res11[0x2];
|
|
|
|
__be16 ceexm4; /* QE external request 4 mask register */
|
2007-09-26 13:03:40 -04:00
|
|
|
u8 res12[0x3A];
|
|
|
|
__be32 ceurnr; /* QE microcode revision number register */
|
|
|
|
u8 res13[0x244];
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* QE Multiplexer */
|
|
|
|
struct qe_mux {
|
|
|
|
__be32 cmxgcr; /* CMX general clock route register */
|
|
|
|
__be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
|
|
|
|
__be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
|
|
|
|
__be32 cmxsi1syr; /* CMX SI1 SYNC route register */
|
2007-10-03 12:34:59 -04:00
|
|
|
__be32 cmxucr[4]; /* CMX UCCx clock route registers */
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
__be32 cmxupcr; /* CMX UPC clock route register */
|
|
|
|
u8 res0[0x1C];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* QE Timers */
|
|
|
|
struct qe_timers {
|
|
|
|
u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
|
|
|
|
u8 res0[0x3];
|
|
|
|
u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
|
|
|
|
u8 res1[0xB];
|
|
|
|
__be16 gtmdr1; /* Timer 1 mode register */
|
|
|
|
__be16 gtmdr2; /* Timer 2 mode register */
|
|
|
|
__be16 gtrfr1; /* Timer 1 reference register */
|
|
|
|
__be16 gtrfr2; /* Timer 2 reference register */
|
|
|
|
__be16 gtcpr1; /* Timer 1 capture register */
|
|
|
|
__be16 gtcpr2; /* Timer 2 capture register */
|
|
|
|
__be16 gtcnr1; /* Timer 1 counter */
|
|
|
|
__be16 gtcnr2; /* Timer 2 counter */
|
|
|
|
__be16 gtmdr3; /* Timer 3 mode register */
|
|
|
|
__be16 gtmdr4; /* Timer 4 mode register */
|
|
|
|
__be16 gtrfr3; /* Timer 3 reference register */
|
|
|
|
__be16 gtrfr4; /* Timer 4 reference register */
|
|
|
|
__be16 gtcpr3; /* Timer 3 capture register */
|
|
|
|
__be16 gtcpr4; /* Timer 4 capture register */
|
|
|
|
__be16 gtcnr3; /* Timer 3 counter */
|
|
|
|
__be16 gtcnr4; /* Timer 4 counter */
|
|
|
|
__be16 gtevr1; /* Timer 1 event register */
|
|
|
|
__be16 gtevr2; /* Timer 2 event register */
|
|
|
|
__be16 gtevr3; /* Timer 3 event register */
|
|
|
|
__be16 gtevr4; /* Timer 4 event register */
|
|
|
|
__be16 gtps; /* Timer 1 prescale register */
|
|
|
|
u8 res2[0x46];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* BRG */
|
|
|
|
struct qe_brg {
|
2006-11-09 16:42:44 -05:00
|
|
|
__be32 brgc[16]; /* BRG configuration registers */
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
u8 res0[0x40];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* SPI */
|
|
|
|
struct spi {
|
|
|
|
u8 res0[0x20];
|
|
|
|
__be32 spmode; /* SPI mode register */
|
|
|
|
u8 res1[0x2];
|
|
|
|
u8 spie; /* SPI event register */
|
|
|
|
u8 res2[0x1];
|
|
|
|
u8 res3[0x2];
|
|
|
|
u8 spim; /* SPI mask register */
|
|
|
|
u8 res4[0x1];
|
|
|
|
u8 res5[0x1];
|
|
|
|
u8 spcom; /* SPI command register */
|
|
|
|
u8 res6[0x2];
|
|
|
|
__be32 spitd; /* SPI transmit data register (cpu mode) */
|
|
|
|
__be32 spird; /* SPI receive data register (cpu mode) */
|
|
|
|
u8 res7[0x8];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* SI */
|
|
|
|
struct si1 {
|
|
|
|
__be16 siamr1; /* SI1 TDMA mode register */
|
|
|
|
__be16 sibmr1; /* SI1 TDMB mode register */
|
|
|
|
__be16 sicmr1; /* SI1 TDMC mode register */
|
|
|
|
__be16 sidmr1; /* SI1 TDMD mode register */
|
|
|
|
u8 siglmr1_h; /* SI1 global mode register high */
|
|
|
|
u8 res0[0x1];
|
|
|
|
u8 sicmdr1_h; /* SI1 command register high */
|
|
|
|
u8 res2[0x1];
|
|
|
|
u8 sistr1_h; /* SI1 status register high */
|
|
|
|
u8 res3[0x1];
|
|
|
|
__be16 sirsr1_h; /* SI1 RAM shadow address register high */
|
|
|
|
u8 sitarc1; /* SI1 RAM counter Tx TDMA */
|
|
|
|
u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
|
|
|
|
u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
|
|
|
|
u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
|
|
|
|
u8 sirarc1; /* SI1 RAM counter Rx TDMA */
|
|
|
|
u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
|
|
|
|
u8 sircrc1; /* SI1 RAM counter Rx TDMC */
|
|
|
|
u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
|
|
|
|
u8 res4[0x8];
|
|
|
|
__be16 siemr1; /* SI1 TDME mode register 16 bits */
|
|
|
|
__be16 sifmr1; /* SI1 TDMF mode register 16 bits */
|
|
|
|
__be16 sigmr1; /* SI1 TDMG mode register 16 bits */
|
|
|
|
__be16 sihmr1; /* SI1 TDMH mode register 16 bits */
|
|
|
|
u8 siglmg1_l; /* SI1 global mode register low 8 bits */
|
|
|
|
u8 res5[0x1];
|
|
|
|
u8 sicmdr1_l; /* SI1 command register low 8 bits */
|
|
|
|
u8 res6[0x1];
|
|
|
|
u8 sistr1_l; /* SI1 status register low 8 bits */
|
|
|
|
u8 res7[0x1];
|
|
|
|
__be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
|
|
|
|
u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
|
|
|
|
u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
|
|
|
|
u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
|
|
|
|
u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
|
|
|
|
u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
|
|
|
|
u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
|
|
|
|
u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
|
|
|
|
u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
|
|
|
|
u8 res8[0x8];
|
|
|
|
__be32 siml1; /* SI1 multiframe limit register */
|
|
|
|
u8 siedm1; /* SI1 extended diagnostic mode register */
|
|
|
|
u8 res9[0xBB];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* SI Routing Tables */
|
|
|
|
struct sir {
|
|
|
|
u8 tx[0x400];
|
|
|
|
u8 rx[0x400];
|
|
|
|
u8 res0[0x800];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* USB Controller */
|
|
|
|
struct usb_ctlr {
|
|
|
|
u8 usb_usmod;
|
|
|
|
u8 usb_usadr;
|
|
|
|
u8 usb_uscom;
|
|
|
|
u8 res1[1];
|
|
|
|
__be16 usb_usep1;
|
|
|
|
__be16 usb_usep2;
|
|
|
|
__be16 usb_usep3;
|
|
|
|
__be16 usb_usep4;
|
|
|
|
u8 res2[4];
|
|
|
|
__be16 usb_usber;
|
|
|
|
u8 res3[2];
|
|
|
|
__be16 usb_usbmr;
|
|
|
|
u8 res4[1];
|
|
|
|
u8 usb_usbs;
|
|
|
|
__be16 usb_ussft;
|
|
|
|
u8 res5[2];
|
|
|
|
__be16 usb_usfrn;
|
|
|
|
u8 res6[0x22];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* MCC */
|
|
|
|
struct mcc {
|
|
|
|
__be32 mcce; /* MCC event register */
|
|
|
|
__be32 mccm; /* MCC mask register */
|
|
|
|
__be32 mccf; /* MCC configuration register */
|
|
|
|
__be32 merl; /* MCC emergency request level register */
|
|
|
|
u8 res0[0xF0];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* QE UCC Slow */
|
|
|
|
struct ucc_slow {
|
|
|
|
__be32 gumr_l; /* UCCx general mode register (low) */
|
|
|
|
__be32 gumr_h; /* UCCx general mode register (high) */
|
|
|
|
__be16 upsmr; /* UCCx protocol-specific mode register */
|
|
|
|
u8 res0[0x2];
|
|
|
|
__be16 utodr; /* UCCx transmit on demand register */
|
|
|
|
__be16 udsr; /* UCCx data synchronization register */
|
|
|
|
__be16 ucce; /* UCCx event register */
|
|
|
|
u8 res1[0x2];
|
|
|
|
__be16 uccm; /* UCCx mask register */
|
|
|
|
u8 res2[0x1];
|
|
|
|
u8 uccs; /* UCCx status register */
|
|
|
|
u8 res3[0x24];
|
|
|
|
__be16 utpt;
|
2007-03-26 15:25:42 -04:00
|
|
|
u8 res4[0x52];
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
u8 guemr; /* UCC general extended mode register */
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* QE UCC Fast */
|
|
|
|
struct ucc_fast {
|
|
|
|
__be32 gumr; /* UCCx general mode register */
|
|
|
|
__be32 upsmr; /* UCCx protocol-specific mode register */
|
|
|
|
__be16 utodr; /* UCCx transmit on demand register */
|
|
|
|
u8 res0[0x2];
|
|
|
|
__be16 udsr; /* UCCx data synchronization register */
|
|
|
|
u8 res1[0x2];
|
|
|
|
__be32 ucce; /* UCCx event register */
|
|
|
|
__be32 uccm; /* UCCx mask register */
|
|
|
|
u8 uccs; /* UCCx status register */
|
|
|
|
u8 res2[0x7];
|
|
|
|
__be32 urfb; /* UCC receive FIFO base */
|
|
|
|
__be16 urfs; /* UCC receive FIFO size */
|
|
|
|
u8 res3[0x2];
|
|
|
|
__be16 urfet; /* UCC receive FIFO emergency threshold */
|
|
|
|
__be16 urfset; /* UCC receive FIFO special emergency
|
|
|
|
threshold */
|
|
|
|
__be32 utfb; /* UCC transmit FIFO base */
|
|
|
|
__be16 utfs; /* UCC transmit FIFO size */
|
|
|
|
u8 res4[0x2];
|
|
|
|
__be16 utfet; /* UCC transmit FIFO emergency threshold */
|
|
|
|
u8 res5[0x2];
|
|
|
|
__be16 utftt; /* UCC transmit FIFO transmit threshold */
|
|
|
|
u8 res6[0x2];
|
|
|
|
__be16 utpt; /* UCC transmit polling timer */
|
|
|
|
u8 res7[0x2];
|
|
|
|
__be32 urtry; /* UCC retry counter register */
|
|
|
|
u8 res8[0x4C];
|
|
|
|
u8 guemr; /* UCC general extended mode register */
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
struct ucc {
|
|
|
|
union {
|
|
|
|
struct ucc_slow slow;
|
|
|
|
struct ucc_fast fast;
|
2007-10-03 12:34:59 -04:00
|
|
|
u8 res[0x200]; /* UCC blocks are 512 bytes each */
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
};
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* MultiPHY UTOPIA POS Controllers (UPC) */
|
|
|
|
struct upc {
|
|
|
|
__be32 upgcr; /* UTOPIA/POS general configuration register */
|
|
|
|
__be32 uplpa; /* UTOPIA/POS last PHY address */
|
|
|
|
__be32 uphec; /* ATM HEC register */
|
|
|
|
__be32 upuc; /* UTOPIA/POS UCC configuration */
|
|
|
|
__be32 updc1; /* UTOPIA/POS device 1 configuration */
|
|
|
|
__be32 updc2; /* UTOPIA/POS device 2 configuration */
|
|
|
|
__be32 updc3; /* UTOPIA/POS device 3 configuration */
|
|
|
|
__be32 updc4; /* UTOPIA/POS device 4 configuration */
|
|
|
|
__be32 upstpa; /* UTOPIA/POS STPA threshold */
|
|
|
|
u8 res0[0xC];
|
|
|
|
__be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
|
|
|
|
__be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
|
|
|
|
__be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
|
|
|
|
__be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
|
|
|
|
__be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
|
|
|
|
__be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
|
|
|
|
__be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
|
|
|
|
__be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
|
|
|
|
__be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
|
|
|
|
__be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
|
|
|
|
__be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
|
|
|
|
__be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
|
|
|
|
__be32 upde1; /* UTOPIA/POS device 1 event */
|
|
|
|
__be32 upde2; /* UTOPIA/POS device 2 event */
|
|
|
|
__be32 upde3; /* UTOPIA/POS device 3 event */
|
|
|
|
__be32 upde4; /* UTOPIA/POS device 4 event */
|
|
|
|
__be16 uprp1;
|
|
|
|
__be16 uprp2;
|
|
|
|
__be16 uprp3;
|
|
|
|
__be16 uprp4;
|
|
|
|
u8 res1[0x8];
|
|
|
|
__be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
|
|
|
|
__be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
|
|
|
|
__be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
|
|
|
|
__be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
|
|
|
|
__be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
|
|
|
|
__be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
|
|
|
|
__be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
|
|
|
|
__be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
|
|
|
|
__be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
|
|
|
|
__be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
|
|
|
|
__be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
|
|
|
|
__be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
|
|
|
|
__be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
|
|
|
|
__be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
|
|
|
|
__be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
|
|
|
|
__be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
|
|
|
|
__be32 uper1; /* Device 1 port enable register */
|
|
|
|
__be32 uper2; /* Device 2 port enable register */
|
|
|
|
__be32 uper3; /* Device 3 port enable register */
|
|
|
|
__be32 uper4; /* Device 4 port enable register */
|
|
|
|
u8 res2[0x150];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* SDMA */
|
|
|
|
struct sdma {
|
|
|
|
__be32 sdsr; /* Serial DMA status register */
|
|
|
|
__be32 sdmr; /* Serial DMA mode register */
|
|
|
|
__be32 sdtr1; /* SDMA system bus threshold register */
|
|
|
|
__be32 sdtr2; /* SDMA secondary bus threshold register */
|
|
|
|
__be32 sdhy1; /* SDMA system bus hysteresis register */
|
|
|
|
__be32 sdhy2; /* SDMA secondary bus hysteresis register */
|
|
|
|
__be32 sdta1; /* SDMA system bus address register */
|
|
|
|
__be32 sdta2; /* SDMA secondary bus address register */
|
|
|
|
__be32 sdtm1; /* SDMA system bus MSNUM register */
|
|
|
|
__be32 sdtm2; /* SDMA secondary bus MSNUM register */
|
|
|
|
u8 res0[0x10];
|
|
|
|
__be32 sdaqr; /* SDMA address bus qualify register */
|
|
|
|
__be32 sdaqmr; /* SDMA address bus qualify mask register */
|
|
|
|
u8 res1[0x4];
|
|
|
|
__be32 sdebcr; /* SDMA CAM entries base register */
|
|
|
|
u8 res2[0x38];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* Debug Space */
|
|
|
|
struct dbg {
|
|
|
|
__be32 bpdcr; /* Breakpoint debug command register */
|
|
|
|
__be32 bpdsr; /* Breakpoint debug status register */
|
|
|
|
__be32 bpdmr; /* Breakpoint debug mask register */
|
|
|
|
__be32 bprmrr0; /* Breakpoint request mode risc register 0 */
|
|
|
|
__be32 bprmrr1; /* Breakpoint request mode risc register 1 */
|
|
|
|
u8 res0[0x8];
|
|
|
|
__be32 bprmtr0; /* Breakpoint request mode trb register 0 */
|
|
|
|
__be32 bprmtr1; /* Breakpoint request mode trb register 1 */
|
|
|
|
u8 res1[0x8];
|
|
|
|
__be32 bprmir; /* Breakpoint request mode immediate register */
|
|
|
|
__be32 bprmsr; /* Breakpoint request mode serial register */
|
|
|
|
__be32 bpemr; /* Breakpoint exit mode register */
|
|
|
|
u8 res2[0x48];
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
/* RISC Special Registers (Trap and Breakpoint) */
|
|
|
|
struct rsp {
|
2007-10-03 12:34:59 -04:00
|
|
|
u32 reg[0x40]; /* 64 32-bit registers */
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
struct qe_immap {
|
|
|
|
struct qe_iram iram; /* I-RAM */
|
|
|
|
struct qe_ic_regs ic; /* Interrupt Controller */
|
|
|
|
struct cp_qe cp; /* Communications Processor */
|
|
|
|
struct qe_mux qmx; /* QE Multiplexer */
|
|
|
|
struct qe_timers qet; /* QE Timers */
|
|
|
|
struct spi spi[0x2]; /* spi */
|
|
|
|
struct mcc mcc; /* mcc */
|
|
|
|
struct qe_brg brg; /* brg */
|
|
|
|
struct usb_ctlr usb; /* USB */
|
|
|
|
struct si1 si1; /* SI */
|
|
|
|
u8 res11[0x800];
|
|
|
|
struct sir sir; /* SI Routing Tables */
|
|
|
|
struct ucc ucc1; /* ucc1 */
|
|
|
|
struct ucc ucc3; /* ucc3 */
|
|
|
|
struct ucc ucc5; /* ucc5 */
|
|
|
|
struct ucc ucc7; /* ucc7 */
|
|
|
|
u8 res12[0x600];
|
|
|
|
struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
|
|
|
|
struct ucc ucc2; /* ucc2 */
|
|
|
|
struct ucc ucc4; /* ucc4 */
|
|
|
|
struct ucc ucc6; /* ucc6 */
|
|
|
|
struct ucc ucc8; /* ucc8 */
|
|
|
|
u8 res13[0x600];
|
|
|
|
struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
|
|
|
|
struct sdma sdma; /* SDMA */
|
2007-10-03 12:34:59 -04:00
|
|
|
struct dbg dbg; /* 0x104080 - 0x1040FF
|
|
|
|
Debug Space */
|
|
|
|
struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF
|
|
|
|
RISC Special Registers
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
(Trap and Breakpoint) */
|
2007-10-03 12:34:59 -04:00
|
|
|
u8 res14[0x300]; /* 0x104300 - 0x1045FF */
|
|
|
|
u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
u8 res16[0x8000]; /* 0x108000 - 0x110000 */
|
|
|
|
u8 muram[0xC000]; /* 0x110000 - 0x11C000
|
|
|
|
Multi-user RAM */
|
|
|
|
u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
|
|
|
|
u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
|
|
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
|
|
extern struct qe_immap *qe_immr;
|
|
|
|
extern phys_addr_t get_qe_base(void);
|
|
|
|
|
2007-10-03 12:34:59 -04:00
|
|
|
static inline unsigned long immrbar_virt_to_phys(void *address)
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 00:10:46 -04:00
|
|
|
{
|
|
|
|
if ( ((u32)address >= (u32)qe_immr) &&
|
|
|
|
((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
|
|
|
|
return (unsigned long)(address - (u32)qe_immr +
|
|
|
|
(u32)get_qe_base());
|
|
|
|
return (unsigned long)virt_to_phys(address);
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* _ASM_POWERPC_IMMAP_QE_H */
|