[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density. The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit. It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 02:32:13 -04:00
|
|
|
/*
|
|
|
|
* AVR32 TLB operations
|
|
|
|
*
|
|
|
|
* Copyright (C) 2004-2006 Atmel Corporation
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
#include <linux/mm.h>
|
|
|
|
|
|
|
|
#include <asm/mmu_context.h>
|
|
|
|
|
|
|
|
#define _TLBEHI_I 0x100
|
|
|
|
|
|
|
|
void show_dtlb_entry(unsigned int index)
|
|
|
|
{
|
2006-09-27 04:50:14 -04:00
|
|
|
unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
|
|
|
|
unsigned long flags;
|
[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density. The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit. It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 02:32:13 -04:00
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
mmucr_save = sysreg_read(MMUCR);
|
|
|
|
tlbehi_save = sysreg_read(TLBEHI);
|
|
|
|
mmucr = mmucr_save & 0x13;
|
|
|
|
mmucr |= index << 14;
|
|
|
|
sysreg_write(MMUCR, mmucr);
|
|
|
|
|
|
|
|
asm volatile("tlbr" : : : "memory");
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
|
|
|
|
tlbehi = sysreg_read(TLBEHI);
|
|
|
|
tlbelo = sysreg_read(TLBELO);
|
|
|
|
|
|
|
|
printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
|
|
|
|
index,
|
|
|
|
(tlbehi & 0x200)?'1':'0',
|
|
|
|
(tlbelo & 0x100)?'1':'0',
|
|
|
|
(tlbehi & 0xff),
|
|
|
|
(tlbehi >> 12), (tlbelo >> 12),
|
|
|
|
(tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
|
|
|
|
(tlbelo & 0x200)?'1':'0',
|
|
|
|
(tlbelo & 0x080)?'1':'0',
|
|
|
|
(tlbelo & 0x001)?'1':'0',
|
|
|
|
(tlbelo & 0x002)?'1':'0');
|
|
|
|
|
|
|
|
sysreg_write(MMUCR, mmucr_save);
|
|
|
|
sysreg_write(TLBEHI, tlbehi_save);
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
void dump_dtlb(void)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
printk("ID V G ASID VPN PFN AP SZ C B W D\n");
|
|
|
|
for (i = 0; i < 32; i++)
|
|
|
|
show_dtlb_entry(i);
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long last_mmucr;
|
|
|
|
|
|
|
|
static inline void set_replacement_pointer(unsigned shift)
|
|
|
|
{
|
|
|
|
unsigned long mmucr, mmucr_save;
|
|
|
|
|
|
|
|
mmucr = mmucr_save = sysreg_read(MMUCR);
|
|
|
|
|
|
|
|
/* Does this mapping already exist? */
|
|
|
|
__asm__ __volatile__(
|
|
|
|
" tlbs\n"
|
|
|
|
" mfsr %0, %1"
|
|
|
|
: "=r"(mmucr)
|
|
|
|
: "i"(SYSREG_MMUCR));
|
|
|
|
|
|
|
|
if (mmucr & SYSREG_BIT(MMUCR_N)) {
|
|
|
|
/* Not found -- pick a not-recently-accessed entry */
|
|
|
|
unsigned long rp;
|
|
|
|
unsigned long tlbar = sysreg_read(TLBARLO);
|
|
|
|
|
|
|
|
rp = 32 - fls(tlbar);
|
|
|
|
if (rp == 32) {
|
|
|
|
rp = 0;
|
|
|
|
sysreg_write(TLBARLO, -1L);
|
|
|
|
}
|
|
|
|
|
|
|
|
mmucr &= 0x13;
|
|
|
|
mmucr |= (rp << shift);
|
|
|
|
|
|
|
|
sysreg_write(MMUCR, mmucr);
|
|
|
|
}
|
|
|
|
|
|
|
|
last_mmucr = mmucr;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid)
|
|
|
|
{
|
|
|
|
unsigned long vpn;
|
|
|
|
|
|
|
|
vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid;
|
|
|
|
sysreg_write(TLBEHI, vpn);
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
|
|
|
|
set_replacement_pointer(14);
|
|
|
|
|
|
|
|
sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK);
|
|
|
|
|
|
|
|
/* Let's go */
|
|
|
|
asm volatile("nop\n\ttlbw" : : : "memory");
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
}
|
|
|
|
|
|
|
|
void update_mmu_cache(struct vm_area_struct *vma,
|
|
|
|
unsigned long address, pte_t pte)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
/* ptrace may call this routine */
|
|
|
|
if (vma && current->active_mm != vma->vm_mm)
|
|
|
|
return;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
update_dtlb(address, pte, get_asid());
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
void __flush_tlb_page(unsigned long asid, unsigned long page)
|
|
|
|
{
|
|
|
|
unsigned long mmucr, tlbehi;
|
|
|
|
|
|
|
|
page |= asid;
|
|
|
|
sysreg_write(TLBEHI, page);
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
asm volatile("tlbs");
|
|
|
|
mmucr = sysreg_read(MMUCR);
|
|
|
|
|
|
|
|
if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
|
|
|
|
unsigned long tlbarlo;
|
|
|
|
unsigned long entry;
|
|
|
|
|
|
|
|
/* Clear the "valid" bit */
|
|
|
|
tlbehi = sysreg_read(TLBEHI);
|
|
|
|
tlbehi &= ~_TLBEHI_VALID;
|
|
|
|
sysreg_write(TLBEHI, tlbehi);
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
|
|
|
|
/* mark the entry as "not accessed" */
|
|
|
|
entry = (mmucr >> 14) & 0x3f;
|
|
|
|
tlbarlo = sysreg_read(TLBARLO);
|
|
|
|
tlbarlo |= (0x80000000 >> entry);
|
|
|
|
sysreg_write(TLBARLO, tlbarlo);
|
|
|
|
|
|
|
|
/* update the entry with valid bit clear */
|
|
|
|
asm volatile("tlbw");
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
|
|
|
|
{
|
|
|
|
if (vma->vm_mm && vma->vm_mm->context != NO_CONTEXT) {
|
|
|
|
unsigned long flags, asid;
|
|
|
|
unsigned long saved_asid = MMU_NO_ASID;
|
|
|
|
|
|
|
|
asid = vma->vm_mm->context & MMU_CONTEXT_ASID_MASK;
|
|
|
|
page &= PAGE_MASK;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (vma->vm_mm != current->mm) {
|
|
|
|
saved_asid = get_asid();
|
|
|
|
set_asid(asid);
|
|
|
|
}
|
|
|
|
|
|
|
|
__flush_tlb_page(asid, page);
|
|
|
|
|
|
|
|
if (saved_asid != MMU_NO_ASID)
|
|
|
|
set_asid(saved_asid);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
|
|
|
|
unsigned long end)
|
|
|
|
{
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
|
|
|
|
if (mm->context != NO_CONTEXT) {
|
|
|
|
unsigned long flags;
|
|
|
|
int size;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
|
|
|
|
if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
|
|
|
|
mm->context = NO_CONTEXT;
|
|
|
|
if (mm == current->mm)
|
|
|
|
activate_context(mm);
|
|
|
|
} else {
|
|
|
|
unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK;
|
|
|
|
unsigned long saved_asid = MMU_NO_ASID;
|
|
|
|
|
|
|
|
start &= PAGE_MASK;
|
|
|
|
end += (PAGE_SIZE - 1);
|
|
|
|
end &= PAGE_MASK;
|
|
|
|
if (mm != current->mm) {
|
|
|
|
saved_asid = get_asid();
|
|
|
|
set_asid(asid);
|
|
|
|
}
|
|
|
|
|
|
|
|
while (start < end) {
|
|
|
|
__flush_tlb_page(asid, start);
|
|
|
|
start += PAGE_SIZE;
|
|
|
|
}
|
|
|
|
if (saved_asid != MMU_NO_ASID)
|
|
|
|
set_asid(saved_asid);
|
|
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO: If this is only called for addresses > TASK_SIZE, we can probably
|
|
|
|
* skip the ASID stuff and just use the Global bit...
|
|
|
|
*/
|
|
|
|
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
int size;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
|
|
|
|
if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
|
|
|
|
flush_tlb_all();
|
|
|
|
} else {
|
|
|
|
unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK;
|
|
|
|
unsigned long saved_asid = get_asid();
|
|
|
|
|
|
|
|
start &= PAGE_MASK;
|
|
|
|
end += (PAGE_SIZE - 1);
|
|
|
|
end &= PAGE_MASK;
|
|
|
|
set_asid(asid);
|
|
|
|
while (start < end) {
|
|
|
|
__flush_tlb_page(asid, start);
|
|
|
|
start += PAGE_SIZE;
|
|
|
|
}
|
|
|
|
set_asid(saved_asid);
|
|
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
void flush_tlb_mm(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
/* Invalidate all TLB entries of this process by getting a new ASID */
|
|
|
|
if (mm->context != NO_CONTEXT) {
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
mm->context = NO_CONTEXT;
|
|
|
|
if (mm == current->mm)
|
|
|
|
activate_context(mm);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void flush_tlb_all(void)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
sysreg_write(MMUCR, sysreg_read(MMUCR) | SYSREG_BIT(MMUCR_I));
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
|
|
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <linux/proc_fs.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
|
|
|
static void *tlb_start(struct seq_file *tlb, loff_t *pos)
|
|
|
|
{
|
|
|
|
static unsigned long tlb_index;
|
|
|
|
|
|
|
|
if (*pos >= 32)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
tlb_index = 0;
|
|
|
|
return &tlb_index;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void *tlb_next(struct seq_file *tlb, void *v, loff_t *pos)
|
|
|
|
{
|
|
|
|
unsigned long *index = v;
|
|
|
|
|
|
|
|
if (*index >= 31)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
++*pos;
|
|
|
|
++*index;
|
|
|
|
return index;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tlb_stop(struct seq_file *tlb, void *v)
|
|
|
|
{
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tlb_show(struct seq_file *tlb, void *v)
|
|
|
|
{
|
2006-09-27 04:50:14 -04:00
|
|
|
unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
|
|
|
|
unsigned long flags;
|
[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density. The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit. It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 02:32:13 -04:00
|
|
|
unsigned long *index = v;
|
|
|
|
|
|
|
|
if (*index == 0)
|
|
|
|
seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n");
|
|
|
|
|
|
|
|
BUG_ON(*index >= 32);
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
mmucr_save = sysreg_read(MMUCR);
|
|
|
|
tlbehi_save = sysreg_read(TLBEHI);
|
|
|
|
mmucr = mmucr_save & 0x13;
|
|
|
|
mmucr |= *index << 14;
|
|
|
|
sysreg_write(MMUCR, mmucr);
|
|
|
|
|
|
|
|
asm volatile("tlbr" : : : "memory");
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
|
|
|
|
tlbehi = sysreg_read(TLBEHI);
|
|
|
|
tlbelo = sysreg_read(TLBELO);
|
|
|
|
|
|
|
|
sysreg_write(MMUCR, mmucr_save);
|
|
|
|
sysreg_write(TLBEHI, tlbehi_save);
|
|
|
|
cpu_sync_pipeline();
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
|
|
|
|
*index,
|
|
|
|
(tlbehi & 0x200)?'1':'0',
|
|
|
|
(tlbelo & 0x100)?'1':'0',
|
|
|
|
(tlbehi & 0xff),
|
|
|
|
(tlbehi >> 12), (tlbelo >> 12),
|
|
|
|
(tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
|
|
|
|
(tlbelo & 0x200)?'1':'0',
|
|
|
|
(tlbelo & 0x080)?'1':'0',
|
|
|
|
(tlbelo & 0x001)?'1':'0',
|
|
|
|
(tlbelo & 0x002)?'1':'0');
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-01-22 14:41:37 -05:00
|
|
|
static const struct seq_operations tlb_ops = {
|
[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density. The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit. It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 02:32:13 -04:00
|
|
|
.start = tlb_start,
|
|
|
|
.next = tlb_next,
|
|
|
|
.stop = tlb_stop,
|
|
|
|
.show = tlb_show,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int tlb_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return seq_open(file, &tlb_ops);
|
|
|
|
}
|
|
|
|
|
2007-02-12 03:55:31 -05:00
|
|
|
static const struct file_operations proc_tlb_operations = {
|
[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density. The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit. It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 02:32:13 -04:00
|
|
|
.open = tlb_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = seq_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init proctlb_init(void)
|
|
|
|
{
|
|
|
|
struct proc_dir_entry *entry;
|
|
|
|
|
|
|
|
entry = create_proc_entry("tlb", 0, NULL);
|
|
|
|
if (entry)
|
|
|
|
entry->proc_fops = &proc_tlb_operations;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
late_initcall(proctlb_init);
|
|
|
|
#endif /* CONFIG_PROC_FS */
|