lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3fac061393
android_kernel_xiaomi_sm8350/arch/powerpc/kernel/entry_64.S

812 lines
18 KiB
ArmAsm
Raw Normal View History

powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
* Adapted for Power Macintosh by Paul Mackerras.
* Low-level exception handlers and MMU support
* rewritten by Paul Mackerras.
* Copyright (C) 1996 Paul Mackerras.
* MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
*
* This file contains the system call entry code, context switch
* code, and exception/interrupt return code for PowerPC.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/errno.h>
#include <asm/unistd.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
#endif
/*
* System calls.
*/
.section ".toc","aw"
.SYS_CALL_TABLE:
.tc .sys_call_table[TC],.sys_call_table
/* This value is used to mark exception frames on the stack. */
exception_marker:
.tc ID_72656773_68657265[TC],0x7265677368657265
.section ".text"
.align 7
#undef SHOW_SYSCALLS
.globl system_call_common
system_call_common:
andi. r10,r12,MSR_PR
mr r10,r1
addi r1,r1,-INT_FRAME_SIZE
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
[POWERPC] system call micro optimisation In the syscall path we currently have: crclr so mfcr r9 If we shift the crclr up we can avoid a stall on some CPUs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 11:15:55 -04:00
crclr so
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-23 18:06:59 -05:00
ACCOUNT_CPU_USER_ENTRY(r10, r11)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
std r2,GPR2(r1)
std r3,GPR3(r1)
std r4,GPR4(r1)
std r5,GPR5(r1)
std r6,GPR6(r1)
std r7,GPR7(r1)
std r8,GPR8(r1)
li r11,0
std r11,GPR9(r1)
std r11,GPR10(r1)
std r11,GPR11(r1)
std r11,GPR12(r1)
std r9,GPR13(r1)
mfcr r9
mflr r10
li r11,0xc01
std r9,_CCR(r1)
std r10,_LINK(r1)
std r11,_TRAP(r1)
mfxer r9
mfctr r10
std r9,_XER(r1)
std r10,_CTR(r1)
std r3,ORIG_GPR3(r1)
ld r2,PACATOC(r13)
addi r9,r1,STACK_FRAME_OVERHEAD
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
#ifdef CONFIG_PPC_ISERIES
/* Hack for handling interrupts when soft-enabling on iSeries */
cmpdi cr1,r0,0x5555 /* syscall 0x5555 */
andi. r10,r12,MSR_PR /* from kernel */
crand 4*cr0+eq,4*cr1+eq,4*cr0+eq
beq hardware_interrupt_entry
lbz r10,PACAPROCENABLED(r13)
std r10,SOFTE(r1)
#endif
mfmsr r11
ori r11,r11,MSR_EE
mtmsrd r11,1
#ifdef SHOW_SYSCALLS
bl .do_show_syscall
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
addi r9,r1,STACK_FRAME_OVERHEAD
#endif
clrrdi r11,r1,THREAD_SHIFT
ld r10,TI_FLAGS(r11)
andi. r11,r10,_TIF_SYSCALL_T_OR_A
bne- syscall_dotrace
syscall_dotrace_cont:
cmpldi 0,r0,NR_syscalls
bge- syscall_enosys
system_call: /* label this so stack traces look sane */
/*
* Need to vector to 32 Bit or default sys_call_table here,
* based on caller's run-mode / personality.
*/
ld r11,.SYS_CALL_TABLE@toc(2)
andi. r10,r10,_TIF_32BIT
beq 15f
addi r11,r11,8 /* use 32-bit syscall entries */
clrldi r3,r3,32
clrldi r4,r4,32
clrldi r5,r5,32
clrldi r6,r6,32
clrldi r7,r7,32
clrldi r8,r8,32
15:
slwi r0,r0,4
ldx r10,r11,r0 /* Fetch system call handler [ptr] */
mtctr r10
bctrl /* Call handler */
syscall_exit:
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
std r3,RESULT(r1)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
#ifdef SHOW_SYSCALLS
bl .do_show_syscall_exit
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
ld r3,RESULT(r1)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
#endif
clrrdi r12,r1,THREAD_SHIFT
/* disable interrupts so current_thread_info()->flags can't change,
and so that we don't get interrupted after loading SRR0/1. */
ld r8,_MSR(r1)
andi. r10,r8,MSR_RI
beq- unrecov_restore
mfmsr r10
rldicl r10,r10,48,1
rotldi r10,r10,16
mtmsrd r10,1
ld r9,TI_FLAGS(r12)
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
li r11,-_LAST_ERRNO
powerpc: Fix various syscall/signal/swapcontext bugs A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-07 21:24:22 -05:00
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
bne- syscall_exit_work
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
cmpld r3,r11
ld r5,_CCR(r1)
bge- syscall_error
syscall_error_cont:
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
ld r7,_NIP(r1)
stdcx. r0,0,r1 /* to clear the reservation */
andi. r6,r8,MSR_PR
ld r4,_LINK(r1)
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-23 18:06:59 -05:00
beq- 1f
ACCOUNT_CPU_USER_EXIT(r11, r12)
ld r13,GPR13(r1) /* only restore r13 if returning to usermode */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
1: ld r2,GPR2(r1)
li r12,MSR_RI
powerpc: correct register usage in 64-bit syscall exit path Since we don't restore the volatile registers in the syscall exit path, we need to make sure we don't leak any potentially interesting values from the kernel to userspace. This was already the case for all except r11. This makes it use r11 for an MSR value, so r11 will have an (uninteresting) MSR value in it on return to userspace. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-19 23:38:47 -05:00
andc r11,r10,r12
mtmsrd r11,1 /* clear MSR.RI */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
ld r1,GPR1(r1)
mtlr r4
mtcr r5
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
rfid
b . /* prevent speculative execution */
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
syscall_error:
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
oris r5,r5,0x1000 /* Set SO bit in CR */
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
neg r3,r3
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
std r5,_CCR(r1)
b syscall_error_cont
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
/* Traced system call support */
syscall_dotrace:
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_syscall_trace_enter
ld r0,GPR0(r1) /* Restore original registers */
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r5,GPR5(r1)
ld r6,GPR6(r1)
ld r7,GPR7(r1)
ld r8,GPR8(r1)
addi r9,r1,STACK_FRAME_OVERHEAD
clrrdi r10,r1,THREAD_SHIFT
ld r10,TI_FLAGS(r10)
b syscall_dotrace_cont
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
syscall_enosys:
li r3,-ENOSYS
b syscall_exit
syscall_exit_work:
/* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
If TIF_NOERROR is set, just save r3 as it is. */
andi. r0,r9,_TIF_RESTOREALL
powerpc: Fix various syscall/signal/swapcontext bugs A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-07 21:24:22 -05:00
beq+ 0f
REST_NVGPRS(r1)
b 2f
0: cmpld r3,r11 /* r10 is -LAST_ERRNO */
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
ld r5,_CCR(r1)
neg r3,r3
oris r5,r5,0x1000 /* Set SO bit in CR */
std r5,_CCR(r1)
1: std r3,GPR3(r1)
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
powerpc: Fix various syscall/signal/swapcontext bugs A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-07 21:24:22 -05:00
/* Clear per-syscall TIF flags if any are set. */
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
3: ldarx r10,0,r12
andc r10,r10,r11
stdcx. r10,0,r12
bne- 3b
subi r12,r12,TI_FLAGS
powerpc: Fix various syscall/signal/swapcontext bugs A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-07 21:24:22 -05:00
4: /* Anything else left to do? */
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
beq .ret_from_except_lite
/* Re-enable interrupts */
mfmsr r10
ori r10,r10,MSR_EE
mtmsrd r10,1
powerpc: Fix various syscall/signal/swapcontext bugs A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-07 21:24:22 -05:00
bl .save_nvgprs
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_syscall_trace_leave
powerpc: Fix various syscall/signal/swapcontext bugs A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-07 21:24:22 -05:00
b .ret_from_except
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
ld r11,_TRAP(r1)
andi. r0,r11,1
beqlr-
SAVE_NVGPRS(r1)
clrrdi r0,r11,1
std r0,_TRAP(r1)
blr
[PATCH] syscall entry/exit revamp This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:52:18 -05:00
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
/*
* The sigsuspend and rt_sigsuspend system calls can call do_signal
* and thus put the process into the stopped state where we might
* want to examine its user state with ptrace. Therefore we need
* to save all the nonvolatile registers (r14 - r31) before calling
* the C code. Similarly, fork, vfork and clone need the full
* register state on the stack so that it can be copied to the child.
*/
_GLOBAL(ppc_fork)
bl .save_nvgprs
bl .sys_fork
b syscall_exit
_GLOBAL(ppc_vfork)
bl .save_nvgprs
bl .sys_vfork
b syscall_exit
_GLOBAL(ppc_clone)
bl .save_nvgprs
bl .sys_clone
b syscall_exit
powerpc: Fix various syscall/signal/swapcontext bugs A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-07 21:24:22 -05:00
_GLOBAL(ppc32_swapcontext)
bl .save_nvgprs
bl .compat_sys_swapcontext
b syscall_exit
_GLOBAL(ppc64_swapcontext)
bl .save_nvgprs
bl .sys_swapcontext
b syscall_exit
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
_GLOBAL(ret_from_fork)
bl .schedule_tail
REST_NVGPRS(r1)
li r3,0
b syscall_exit
/*
* This routine switches between two different tasks. The process
* state of one is saved on its kernel stack. Then the state
* of the other is restored from its kernel stack. The memory
* management hardware is updated to the second process's state.
* Finally, we can return to the second process, via ret_from_except.
* On entry, r3 points to the THREAD for the current task, r4
* points to the THREAD for the new task.
*
* Note: there are two ways to get to the "going out" portion
* of this code; either by coming in via the entry (_switch)
* or via "fork" which must set up an environment equivalent
* to the "_switch" path. If you change this you'll have to change
* the fork code also.
*
* The code which creates the new task context is in 'copy_thread'
[PATCH] powerpc: trivial: modify comments to refer to new location of files This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-23 11:58:20 -05:00
* in arch/powerpc/kernel/process.c
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
*/
.align 7
_GLOBAL(_switch)
mflr r0
std r0,16(r1)
stdu r1,-SWITCH_FRAME_SIZE(r1)
/* r3-r13 are caller saved -- Cort */
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
mflr r20 /* Return to switch caller */
mfmsr r22
li r0, MSR_FP
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
oris r0,r0,MSR_VEC@h /* Disable altivec */
mfspr r24,SPRN_VRSAVE /* save vrsave register value */
std r24,THREAD_VRSAVE(r3)
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
and. r0,r0,r22
beq+ 1f
andc r22,r22,r0
mtmsrd r22
isync
1: std r20,_NIP(r1)
mfcr r23
std r23,_CCR(r1)
std r1,KSP(r3) /* Set old stack pointer */
#ifdef CONFIG_SMP
/* We need a sync somewhere here to make sure that if the
* previous task gets rescheduled on another CPU, it sees all
* stores it has performed on this one.
*/
sync
#endif /* CONFIG_SMP */
addi r6,r4,-THREAD /* Convert THREAD to 'current' */
std r6,PACACURRENT(r13) /* Set new 'current' */
ld r8,KSP(r4) /* new stack pointer */
BEGIN_FTR_SECTION
clrrdi r6,r8,28 /* get its ESID */
clrrdi r9,r1,28 /* get current sp ESID */
clrldi. r0,r6,2 /* is new ESID c00000000? */
cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */
cror eq,4*cr1+eq,eq
beq 2f /* if yes, don't slbie it */
/* Bolt in the new stack SLB entry */
ld r7,KSP_VSID(r4) /* Get new stack's VSID */
oris r0,r6,(SLB_ESID_V)@h
ori r0,r0,(SLB_NUM_BOLTED-1)@l
slbie r6
slbie r6 /* Workaround POWER5 < DD2.1 issue */
slbmte r7,r0
isync
2:
END_FTR_SECTION_IFSET(CPU_FTR_SLB)
clrrdi r7,r8,THREAD_SHIFT /* base of new stack */
/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
because we don't need to leave the 288-byte ABI gap at the
top of the kernel stack. */
addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE
mr r1,r8 /* start using new stack pointer */
std r7,PACAKSAVE(r13)
ld r6,_CCR(r1)
mtcrf 0xFF,r6
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
ld r0,THREAD_VRSAVE(r4)
mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
/* r3-r13 are destroyed -- Cort */
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */
mtlr r7
addi r1,r1,SWITCH_FRAME_SIZE
blr
.align 7
_GLOBAL(ret_from_except)
ld r11,_TRAP(r1)
andi. r0,r11,1
bne .ret_from_except_lite
REST_NVGPRS(r1)
_GLOBAL(ret_from_except_lite)
/*
* Disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt.
*/
mfmsr r10 /* Get current interrupt state */
rldicl r9,r10,48,1 /* clear MSR_EE */
rotldi r9,r9,16
mtmsrd r9,1 /* Update machine state */
#ifdef CONFIG_PREEMPT
clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */
li r0,_TIF_NEED_RESCHED /* bits to check */
ld r3,_MSR(r1)
ld r4,TI_FLAGS(r9)
/* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */
rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING
and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */
bne do_work
#else /* !CONFIG_PREEMPT */
ld r3,_MSR(r1) /* Returning to user mode? */
andi. r3,r3,MSR_PR
beq restore /* if not, just restore regs and return */
/* Check current_thread_info()->flags */
clrrdi r9,r1,THREAD_SHIFT
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_USER_WORK_MASK
bne do_work
#endif
restore:
#ifdef CONFIG_PPC_ISERIES
ld r5,SOFTE(r1)
cmpdi 0,r5,0
beq 4f
/* Check for pending interrupts (iSeries) */
[PATCH] powerpc: Remove lppaca structure from the PACA At present the lppaca - the structure shared with the iSeries hypervisor and phyp - is contained within the PACA, our own low-level per-cpu structure. This doesn't have to be so, the patch below removes it, making a separate array of lppaca structures. This saves approximately 500*NR_CPUS bytes of image size and kernel memory, because we don't need aligning gap between the Linux and hypervisor portions of every PACA. On the other hand it means an extra level of dereference in many accesses to the lppaca. The patch also gets rid of several places where we assign the paca address to a local variable for no particular reason. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 18:26:42 -05:00
ld r3,PACALPPACAPTR(r13)
ld r3,LPPACAANYINT(r3)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
cmpdi r3,0
beq+ 4f /* skip do_IRQ if no interrupts */
li r3,0
stb r3,PACAPROCENABLED(r13) /* ensure we are soft-disabled */
ori r10,r10,MSR_EE
mtmsrd r10 /* hard-enable again */
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_IRQ
b .ret_from_except_lite /* loop back and handle more */
4: stb r5,PACAPROCENABLED(r13)
#endif
ld r3,_MSR(r1)
andi. r0,r3,MSR_RI
beq- unrecov_restore
andi. r0,r3,MSR_PR
/*
* r13 is our per cpu area, only restore it if we are returning to
* userspace
*/
beq 1f
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-23 18:06:59 -05:00
ACCOUNT_CPU_USER_EXIT(r3, r4)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
REST_GPR(13, r1)
1:
ld r3,_CTR(r1)
ld r0,_LINK(r1)
mtctr r3
mtlr r0
ld r3,_XER(r1)
mtspr SPRN_XER,r3
REST_8GPRS(5, r1)
stdcx. r0,0,r1 /* to clear the reservation */
mfmsr r0
li r2, MSR_RI
andc r0,r0,r2
mtmsrd r0,1
ld r0,_MSR(r1)
mtspr SPRN_SRR1,r0
ld r2,_CCR(r1)
mtcrf 0xFF,r2
ld r2,_NIP(r1)
mtspr SPRN_SRR0,r2
ld r0,GPR0(r1)
ld r2,GPR2(r1)
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r1,GPR1(r1)
rfid
b . /* prevent speculative execution */
/* Note: this must change if we start using the TIF_NOTIFY_RESUME bit */
do_work:
#ifdef CONFIG_PREEMPT
andi. r0,r3,MSR_PR /* Returning to user mode? */
bne user_work
/* Check that preempt_count() == 0 and interrupts are enabled */
lwz r8,TI_PREEMPT(r9)
cmpwi cr1,r8,0
#ifdef CONFIG_PPC_ISERIES
ld r0,SOFTE(r1)
cmpdi r0,0
#else
andi. r0,r3,MSR_EE
#endif
crandc eq,cr1*4+eq,eq
bne restore
/* here we are preempting the current task */
1:
#ifdef CONFIG_PPC_ISERIES
li r0,1
stb r0,PACAPROCENABLED(r13)
#endif
ori r10,r10,MSR_EE
mtmsrd r10,1 /* reenable interrupts */
bl .preempt_schedule
mfmsr r10
clrrdi r9,r1,THREAD_SHIFT
rldicl r10,r10,48,1 /* disable interrupts again */
rotldi r10,r10,16
mtmsrd r10,1
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
b restore
user_work:
#endif
/* Enable interrupts */
ori r10,r10,MSR_EE
mtmsrd r10,1
andi. r0,r4,_TIF_NEED_RESCHED
beq 1f
bl .schedule
b .ret_from_except_lite
1: bl .save_nvgprs
li r3,0
addi r4,r1,STACK_FRAME_OVERHEAD
bl .do_signal
b .ret_from_except
unrecov_restore:
addi r3,r1,STACK_FRAME_OVERHEAD
bl .unrecoverable_exception
b unrecov_restore
#ifdef CONFIG_PPC_RTAS
/*
* On CHRP, the Run-Time Abstraction Services (RTAS) have to be
* called with the MMU off.
*
* In addition, we need to be in 32b mode, at least for now.
*
* Note: r3 is an input parameter to rtas, so don't trash it...
*/
_GLOBAL(enter_rtas)
mflr r0
std r0,16(r1)
stdu r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */
/* Because RTAS is running in 32b mode, it clobbers the high order half
* of all registers that it saves. We therefore save those registers
* RTAS might touch to the stack. (r0, r3-r13 are caller saved)
*/
SAVE_GPR(2, r1) /* Save the TOC */
SAVE_GPR(13, r1) /* Save paca */
SAVE_8GPRS(14, r1) /* Save the non-volatiles */
SAVE_10GPRS(22, r1) /* ditto */
mfcr r4
std r4,_CCR(r1)
mfctr r5
std r5,_CTR(r1)
mfspr r6,SPRN_XER
std r6,_XER(r1)
mfdar r7
std r7,_DAR(r1)
mfdsisr r8
std r8,_DSISR(r1)
mfsrr0 r9
std r9,_SRR0(r1)
mfsrr1 r10
std r10,_SRR1(r1)
[PATCH] powerpc: Workaround for pSeries RTAS bug A bug in the RTAS services incorrectly interprets some bits in the CR when called from the OS. Specifically, bits in CR4. The result could be a firmware crash that also takes down the partition. A firmware fix is in the works. We have seen this situation when performing DLPAR operations. As a temporary workaround, clear the CR in enter_rtas(). Note that enter_rtas() will not set any bits in CR4 before calling RTAS. Also note that the 32 bit version of enter_rtas() should have the same work around even though the chances of hitting the bug are much smaller due to the lack of DLPAR on 32 bit kernels. However, my assembly skills are a bit rusty and the 32 bit code doesn't seem to follow the conventions for where things should be saved. In addition, I don't have a system to test 32 bit kernels. Help creating and at least touch testing the same workaround for 32 bit would be appreciated. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 18:20:00 -05:00
/* Temporary workaround to clear CR until RTAS can be modified to
* ignore all bits.
*/
li r0,0
mtcr r0
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
/* There is no way it is acceptable to get here with interrupts enabled,
* check it with the asm equivalent of WARN_ON
*/
mfmsr r6
andi. r0,r6,MSR_EE
1: tdnei r0,0
.section __bug_table,"a"
.llong 1b,__LINE__ + 0x1000000, 1f, 2f
.previous
.section .rodata,"a"
1: .asciz __FILE__
2: .asciz "enter_rtas"
.previous
/* Unfortunately, the stack pointer and the MSR are also clobbered,
* so they are saved in the PACA which allows us to restore
* our original state after RTAS returns.
*/
std r1,PACAR1(r13)
std r6,PACASAVEDMSR(r13)
/* Setup our real return addr */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 22:56:25 -05:00
LOAD_REG_ADDR(r4,.rtas_return_loc)
clrldi r4,r4,2 /* convert to realmode address */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
mtlr r4
li r0,0
ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI
andc r0,r6,r0
li r9,1
rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP
andc r6,r0,r9
ori r6,r6,MSR_RI
sync /* disable interrupts so SRR0/1 */
mtmsrd r0 /* don't get trashed */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 22:56:25 -05:00
LOAD_REG_ADDR(r4, rtas)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
ld r5,RTASENTRY(r4) /* get the rtas->entry value */
ld r4,RTASBASE(r4) /* get the rtas->base value */
mtspr SPRN_SRR0,r5
mtspr SPRN_SRR1,r6
rfid
b . /* prevent speculative execution */
_STATIC(rtas_return_loc)
/* relocation is off at this point */
mfspr r4,SPRN_SPRG3 /* Get PACA */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 22:56:25 -05:00
clrldi r4,r4,2 /* convert to realmode address */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
mfmsr r6
li r0,MSR_RI
andc r6,r6,r0
sync
mtmsrd r6
ld r1,PACAR1(r4) /* Restore our SP */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 22:56:25 -05:00
LOAD_REG_IMMEDIATE(r3,.rtas_restore_regs)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 08:36:14 -04:00
ld r4,PACASAVEDMSR(r4) /* Restore our MSR */
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
rfid
b . /* prevent speculative execution */
_STATIC(rtas_restore_regs)
/* relocation is on at this point */
REST_GPR(2, r1) /* Restore the TOC */
REST_GPR(13, r1) /* Restore paca */
REST_8GPRS(14, r1) /* Restore the non-volatiles */
REST_10GPRS(22, r1) /* ditto */
mfspr r13,SPRN_SPRG3
ld r4,_CCR(r1)
mtcr r4
ld r5,_CTR(r1)
mtctr r5
ld r6,_XER(r1)
mtspr SPRN_XER,r6
ld r7,_DAR(r1)
mtdar r7
ld r8,_DSISR(r1)
mtdsisr r8
ld r9,_SRR0(r1)
mtsrr0 r9
ld r10,_SRR1(r1)
mtsrr1 r10
addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */
ld r0,16(r1) /* get return address */
mtlr r0
blr /* return to caller */
#endif /* CONFIG_PPC_RTAS */
#ifdef CONFIG_PPC_MULTIPLATFORM
_GLOBAL(enter_prom)
mflr r0
std r0,16(r1)
stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
/* Because PROM is running in 32b mode, it clobbers the high order half
* of all registers that it saves. We therefore save those registers
* PROM might touch to the stack. (r0, r3-r13 are caller saved)
*/
SAVE_8GPRS(2, r1)
SAVE_GPR(13, r1)
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
mfcr r4
std r4,_CCR(r1)
mfctr r5
std r5,_CTR(r1)
mfspr r6,SPRN_XER
std r6,_XER(r1)
mfdar r7
std r7,_DAR(r1)
mfdsisr r8
std r8,_DSISR(r1)
mfsrr0 r9
std r9,_SRR0(r1)
mfsrr1 r10
std r10,_SRR1(r1)
mfmsr r11
std r11,_MSR(r1)
/* Get the PROM entrypoint */
ld r0,GPR4(r1)
mtlr r0
/* Switch MSR to 32 bits mode
*/
mfmsr r11
li r12,1
rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
andc r11,r11,r12
li r12,1
rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
andc r11,r11,r12
mtmsrd r11
isync
/* Restore arguments & enter PROM here... */
ld r3,GPR3(r1)
blrl
/* Just make sure that r1 top 32 bits didn't get
* corrupt by OF
*/
rldicl r1,r1,0,32
/* Restore the MSR (back to 64 bits) */
ld r0,_MSR(r1)
mtmsrd r0
isync
/* Restore other registers */
REST_GPR(2, r1)
REST_GPR(13, r1)
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
ld r4,_CCR(r1)
mtcr r4
ld r5,_CTR(r1)
mtctr r5
ld r6,_XER(r1)
mtspr SPRN_XER,r6
ld r7,_DAR(r1)
mtdar r7
ld r8,_DSISR(r1)
mtdsisr r8
ld r9,_SRR0(r1)
mtsrr0 r9
ld r10,_SRR1(r1)
mtsrr1 r10
addi r1,r1,PROM_FRAME_SIZE
ld r0,16(r1)
mtlr r0
blr
#endif /* CONFIG_PPC_MULTIPLATFORM */
Reference in New Issue Copy Permalink