android_kernel_xiaomi_sm8350/arch/blackfin/include/asm/signal.h

161 lines
3.5 KiB
C
Raw Normal View History

blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
#ifndef _BLACKFIN_SIGNAL_H
#define _BLACKFIN_SIGNAL_H
#include <linux/types.h>
/* Avoid too many header ordering problems. */
struct siginfo;
#ifdef __KERNEL__
/* Most things should be clean enough to redefine this at will, if care
is taken to make libc match. */
#define _NSIG 64
#define _NSIG_BPW 32
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
typedef unsigned long old_sigset_t; /* at least 32 bits */
typedef struct {
unsigned long sig[_NSIG_WORDS];
} sigset_t;
#else
/* Here we must cater to libcs that poke about in kernel headers. */
#define NSIG 32
typedef unsigned long sigset_t;
#endif /* __KERNEL__ */
#define SIGHUP 1
#define SIGINT 2
#define SIGQUIT 3
#define SIGILL 4
#define SIGTRAP 5
#define SIGABRT 6
#define SIGIOT 6
#define SIGBUS 7
#define SIGFPE 8
#define SIGKILL 9
#define SIGUSR1 10
#define SIGSEGV 11
#define SIGUSR2 12
#define SIGPIPE 13
#define SIGALRM 14
#define SIGTERM 15
#define SIGSTKFLT 16
#define SIGCHLD 17
#define SIGCONT 18
#define SIGSTOP 19
#define SIGTSTP 20
#define SIGTTIN 21
#define SIGTTOU 22
#define SIGURG 23
#define SIGXCPU 24
#define SIGXFSZ 25
#define SIGVTALRM 26
#define SIGPROF 27
#define SIGWINCH 28
#define SIGIO 29
#define SIGPOLL SIGIO
/*
#define SIGLOST 29
*/
#define SIGPWR 30
#define SIGSYS 31
#define SIGUNUSED 31
/* These should not be considered constants from userland. */
#define SIGRTMIN 32
#define SIGRTMAX _NSIG
/*
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
* SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
* SA_NODEFER prevents the current signal from being masked in the handler.
*
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
* Unix names RESETHAND and NODEFER respectively.
*/
#define SA_NOCLDSTOP 0x00000001
#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
#define SA_SIGINFO 0x00000004
#define SA_ONSTACK 0x08000000
#define SA_RESTART 0x10000000
#define SA_NODEFER 0x40000000
#define SA_RESETHAND 0x80000000
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
/*
* sigaltstack controls
*/
#define SS_ONSTACK 1
#define SS_DISABLE 2
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
#include <asm-generic/signal.h>
#ifdef __KERNEL__
struct old_sigaction {
__sighandler_t sa_handler;
old_sigset_t sa_mask;
unsigned long sa_flags;
void (*sa_restorer) (void);
};
struct sigaction {
__sighandler_t sa_handler;
unsigned long sa_flags;
void (*sa_restorer) (void);
sigset_t sa_mask; /* mask last for extensibility */
};
struct k_sigaction {
struct sigaction sa;
};
#else
/* Here we must cater to libcs that poke about in kernel headers. */
struct sigaction {
union {
__sighandler_t _sa_handler;
void (*_sa_sigaction) (int, struct siginfo *, void *);
} _u;
sigset_t sa_mask;
unsigned long sa_flags;
void (*sa_restorer) (void);
};
#define sa_handler _u._sa_handler
#define sa_sigaction _u._sa_sigaction
#endif /* __KERNEL__ */
typedef struct sigaltstack {
void __user *ss_sp;
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 17:50:22 -04:00
int ss_flags;
size_t ss_size;
} stack_t;
#ifdef __KERNEL__
#include <asm/sigcontext.h>
#undef __HAVE_ARCH_SIG_BITOPS
#define ptrace_signal_deliver(regs, cookie) do { } while (0)
#endif /* __KERNEL__ */
#endif /* _BLACKFIN_SIGNAL_H */