android_kernel_xiaomi_sm8350/fs/gfs2/ops_super.c

702 lines
16 KiB
C
Raw Normal View History

/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
* Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License version 2.
*/
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
#include <linux/statfs.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
#include <linux/kthread.h>
#include <linux/delay.h>
#include <linux/gfs2_ondisk.h>
#include <linux/crc32.h>
#include <linux/lm_interface.h>
#include <linux/time.h>
#include "gfs2.h"
#include "incore.h"
#include "glock.h"
#include "inode.h"
#include "log.h"
#include "mount.h"
#include "quota.h"
#include "recovery.h"
#include "rgrp.h"
#include "super.h"
#include "sys.h"
#include "util.h"
#include "trans.h"
#include "dir.h"
#include "eattr.h"
#include "bmap.h"
#include "meta_io.h"
/**
* gfs2_write_inode - Make sure the inode is stable on the disk
* @inode: The inode
* @sync: synchronous write flag
*
* Returns: errno
*/
static int gfs2_write_inode(struct inode *inode, int sync)
{
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct gfs2_holder gh;
struct buffer_head *bh;
struct timespec atime;
struct gfs2_dinode *di;
int ret = 0;
/* Check this is a "normal" inode, etc */
if (!test_bit(GIF_USER, &ip->i_flags) ||
(current->flags & PF_MEMALLOC))
return 0;
ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
if (ret)
goto do_flush;
ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
if (ret)
goto do_unlock;
ret = gfs2_meta_inode_buffer(ip, &bh);
if (ret == 0) {
di = (struct gfs2_dinode *)bh->b_data;
atime.tv_sec = be64_to_cpu(di->di_atime);
atime.tv_nsec = be32_to_cpu(di->di_atime_nsec);
if (timespec_compare(&inode->i_atime, &atime) > 0) {
gfs2_trans_add_bh(ip->i_gl, bh, 1);
gfs2_dinode_out(ip, bh->b_data);
}
brelse(bh);
}
gfs2_trans_end(sdp);
do_unlock:
gfs2_glock_dq_uninit(&gh);
do_flush:
if (sync != 0)
gfs2_log_flush(GFS2_SB(inode), ip->i_gl);
return ret;
}
/**
* gfs2_make_fs_ro - Turn a Read-Write FS into a Read-Only one
* @sdp: the filesystem
*
* Returns: errno
*/
static int gfs2_make_fs_ro(struct gfs2_sbd *sdp)
{
struct gfs2_holder t_gh;
int error;
gfs2_quota_sync(sdp);
gfs2_statfs_sync(sdp);
error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED, GL_NOCACHE,
&t_gh);
if (error && !test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
return error;
gfs2_meta_syncfs(sdp);
gfs2_log_shutdown(sdp);
clear_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags);
if (t_gh.gh_gl)
gfs2_glock_dq_uninit(&t_gh);
gfs2_quota_cleanup(sdp);
return error;
}
/**
* gfs2_put_super - Unmount the filesystem
* @sb: The VFS superblock
*
*/
static void gfs2_put_super(struct super_block *sb)
{
struct gfs2_sbd *sdp = sb->s_fs_info;
int error;
/* Unfreeze the filesystem, if we need to */
mutex_lock(&sdp->sd_freeze_lock);
if (sdp->sd_freeze_count)
gfs2_glock_dq_uninit(&sdp->sd_freeze_gh);
mutex_unlock(&sdp->sd_freeze_lock);
kthread_stop(sdp->sd_quotad_process);
kthread_stop(sdp->sd_logd_process);
kthread_stop(sdp->sd_recoverd_process);
if (!(sb->s_flags & MS_RDONLY)) {
error = gfs2_make_fs_ro(sdp);
if (error)
gfs2_io_error(sdp);
}
/* At this point, we're through modifying the disk */
/* Release stuff */
iput(sdp->sd_jindex);
iput(sdp->sd_inum_inode);
iput(sdp->sd_statfs_inode);
iput(sdp->sd_rindex);
iput(sdp->sd_quota_inode);
gfs2_glock_put(sdp->sd_rename_gl);
gfs2_glock_put(sdp->sd_trans_gl);
if (!sdp->sd_args.ar_spectator) {
gfs2_glock_dq_uninit(&sdp->sd_journal_gh);
gfs2_glock_dq_uninit(&sdp->sd_jinode_gh);
gfs2_glock_dq_uninit(&sdp->sd_ir_gh);
gfs2_glock_dq_uninit(&sdp->sd_sc_gh);
gfs2_glock_dq_uninit(&sdp->sd_qc_gh);
iput(sdp->sd_ir_inode);
iput(sdp->sd_sc_inode);
iput(sdp->sd_qc_inode);
}
gfs2_glock_dq_uninit(&sdp->sd_live_gh);
gfs2_clear_rgrpd(sdp);
gfs2_jindex_free(sdp);
/* Take apart glock structures and buffer lists */
gfs2_gl_hash_clear(sdp);
/* Unmount the locking protocol */
gfs2_lm_unmount(sdp);
/* At this point, we're through participating in the lockspace */
gfs2_sys_fs_del(sdp);
}
/**
* gfs2_write_super
* @sb: the superblock
*
*/
static void gfs2_write_super(struct super_block *sb)
{
sb->s_dirt = 0;
}
/**
* gfs2_sync_fs - sync the filesystem
* @sb: the superblock
*
* Flushes the log to disk.
*/
static int gfs2_sync_fs(struct super_block *sb, int wait)
{
sb->s_dirt = 0;
if (wait && sb->s_fs_info)
gfs2_log_flush(sb->s_fs_info, NULL);
return 0;
}
/**
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 19:40:58 -05:00
* gfs2_freeze - prevent further writes to the filesystem
* @sb: the VFS structure for the filesystem
*
*/
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 19:40:58 -05:00
static int gfs2_freeze(struct super_block *sb)
{
struct gfs2_sbd *sdp = sb->s_fs_info;
int error;
if (test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 19:40:58 -05:00
return -EINVAL;
for (;;) {
error = gfs2_freeze_fs(sdp);
if (!error)
break;
switch (error) {
case -EBUSY:
fs_err(sdp, "waiting for recovery before freeze\n");
break;
default:
fs_err(sdp, "error freezing FS: %d\n", error);
break;
}
fs_err(sdp, "retrying...\n");
msleep(1000);
}
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 19:40:58 -05:00
return 0;
}
/**
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 19:40:58 -05:00
* gfs2_unfreeze - reallow writes to the filesystem
* @sb: the VFS structure for the filesystem
*
*/
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 19:40:58 -05:00
static int gfs2_unfreeze(struct super_block *sb)
{
gfs2_unfreeze_fs(sb->s_fs_info);
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 19:40:58 -05:00
return 0;
}
/**
* statfs_fill - fill in the sg for a given RG
* @rgd: the RG
* @sc: the sc structure
*
* Returns: 0 on success, -ESTALE if the LVB is invalid
*/
static int statfs_slow_fill(struct gfs2_rgrpd *rgd,
struct gfs2_statfs_change_host *sc)
{
gfs2_rgrp_verify(rgd);
sc->sc_total += rgd->rd_data;
sc->sc_free += rgd->rd_free;
sc->sc_dinodes += rgd->rd_dinodes;
return 0;
}
/**
* gfs2_statfs_slow - Stat a filesystem using asynchronous locking
* @sdp: the filesystem
* @sc: the sc info that will be returned
*
* Any error (other than a signal) will cause this routine to fall back
* to the synchronous version.
*
* FIXME: This really shouldn't busy wait like this.
*
* Returns: errno
*/
static int gfs2_statfs_slow(struct gfs2_sbd *sdp, struct gfs2_statfs_change_host *sc)
{
struct gfs2_holder ri_gh;
struct gfs2_rgrpd *rgd_next;
struct gfs2_holder *gha, *gh;
unsigned int slots = 64;
unsigned int x;
int done;
int error = 0, err;
memset(sc, 0, sizeof(struct gfs2_statfs_change_host));
gha = kcalloc(slots, sizeof(struct gfs2_holder), GFP_KERNEL);
if (!gha)
return -ENOMEM;
error = gfs2_rindex_hold(sdp, &ri_gh);
if (error)
goto out;
rgd_next = gfs2_rgrpd_get_first(sdp);
for (;;) {
done = 1;
for (x = 0; x < slots; x++) {
gh = gha + x;
if (gh->gh_gl && gfs2_glock_poll(gh)) {
err = gfs2_glock_wait(gh);
if (err) {
gfs2_holder_uninit(gh);
error = err;
} else {
if (!error)
error = statfs_slow_fill(
gh->gh_gl->gl_object, sc);
gfs2_glock_dq_uninit(gh);
}
}
if (gh->gh_gl)
done = 0;
else if (rgd_next && !error) {
error = gfs2_glock_nq_init(rgd_next->rd_gl,
LM_ST_SHARED,
GL_ASYNC,
gh);
rgd_next = gfs2_rgrpd_get_next(rgd_next);
done = 0;
}
if (signal_pending(current))
error = -ERESTARTSYS;
}
if (done)
break;
yield();
}
gfs2_glock_dq_uninit(&ri_gh);
out:
kfree(gha);
return error;
}
/**
* gfs2_statfs_i - Do a statfs
* @sdp: the filesystem
* @sg: the sg structure
*
* Returns: errno
*/
static int gfs2_statfs_i(struct gfs2_sbd *sdp, struct gfs2_statfs_change_host *sc)
{
struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
spin_lock(&sdp->sd_statfs_spin);
*sc = *m_sc;
sc->sc_total += l_sc->sc_total;
sc->sc_free += l_sc->sc_free;
sc->sc_dinodes += l_sc->sc_dinodes;
spin_unlock(&sdp->sd_statfs_spin);
if (sc->sc_free < 0)
sc->sc_free = 0;
if (sc->sc_free > sc->sc_total)
sc->sc_free = sc->sc_total;
if (sc->sc_dinodes < 0)
sc->sc_dinodes = 0;
return 0;
}
/**
* gfs2_statfs - Gather and return stats about the filesystem
* @sb: The superblock
* @statfsbuf: The buffer
*
* Returns: 0 on success or error code
*/
static int gfs2_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_inode->i_sb;
struct gfs2_sbd *sdp = sb->s_fs_info;
struct gfs2_statfs_change_host sc;
int error;
if (gfs2_tune_get(sdp, gt_statfs_slow))
error = gfs2_statfs_slow(sdp, &sc);
else
error = gfs2_statfs_i(sdp, &sc);
if (error)
return error;
buf->f_type = GFS2_MAGIC;
buf->f_bsize = sdp->sd_sb.sb_bsize;
buf->f_blocks = sc.sc_total;
buf->f_bfree = sc.sc_free;
buf->f_bavail = sc.sc_free;
buf->f_files = sc.sc_dinodes + sc.sc_free;
buf->f_ffree = sc.sc_free;
buf->f_namelen = GFS2_FNAMESIZE;
return 0;
}
/**
* gfs2_remount_fs - called when the FS is remounted
* @sb: the filesystem
* @flags: the remount flags
* @data: extra data passed in (not used right now)
*
* Returns: errno
*/
static int gfs2_remount_fs(struct super_block *sb, int *flags, char *data)
{
struct gfs2_sbd *sdp = sb->s_fs_info;
int error;
error = gfs2_mount_args(sdp, data, 1);
if (error)
return error;
if (sdp->sd_args.ar_spectator)
*flags |= MS_RDONLY;
else {
if (*flags & MS_RDONLY) {
if (!(sb->s_flags & MS_RDONLY))
error = gfs2_make_fs_ro(sdp);
} else if (!(*flags & MS_RDONLY) &&
(sb->s_flags & MS_RDONLY)) {
error = gfs2_make_fs_rw(sdp);
}
}
return error;
}
/**
* gfs2_drop_inode - Drop an inode (test for remote unlink)
* @inode: The inode to drop
*
* If we've received a callback on an iopen lock then its because a
* remote node tried to deallocate the inode but failed due to this node
* still having the inode open. Here we mark the link count zero
* since we know that it must have reached zero if the GLF_DEMOTE flag
* is set on the iopen glock. If we didn't do a disk read since the
* remote node removed the final link then we might otherwise miss
* this event. This check ensures that this node will deallocate the
* inode's blocks, or alternatively pass the baton on to another
* node for later deallocation.
*/
static void gfs2_drop_inode(struct inode *inode)
{
struct gfs2_inode *ip = GFS2_I(inode);
if (test_bit(GIF_USER, &ip->i_flags) && inode->i_nlink) {
struct gfs2_glock *gl = ip->i_iopen_gh.gh_gl;
if (gl && test_bit(GLF_DEMOTE, &gl->gl_flags))
clear_nlink(inode);
}
generic_drop_inode(inode);
}
/**
* gfs2_clear_inode - Deallocate an inode when VFS is done with it
* @inode: The VFS inode
*
*/
static void gfs2_clear_inode(struct inode *inode)
{
struct gfs2_inode *ip = GFS2_I(inode);
/* This tells us its a "real" inode and not one which only
* serves to contain an address space (see rgrp.c, meta_io.c)
* which therefore doesn't have its own glocks.
*/
if (test_bit(GIF_USER, &ip->i_flags)) {
ip->i_gl->gl_object = NULL;
gfs2_glock_put(ip->i_gl);
ip->i_gl = NULL;
if (ip->i_iopen_gh.gh_gl) {
ip->i_iopen_gh.gh_gl->gl_object = NULL;
gfs2_glock_dq_uninit(&ip->i_iopen_gh);
}
}
}
static int is_ancestor(const struct dentry *d1, const struct dentry *d2)
{
do {
if (d1 == d2)
return 1;
d1 = d1->d_parent;
} while (!IS_ROOT(d1));
return 0;
}
/**
* gfs2_show_options - Show mount options for /proc/mounts
* @s: seq_file structure
* @mnt: vfsmount
*
* Returns: 0 on success or error code
*/
static int gfs2_show_options(struct seq_file *s, struct vfsmount *mnt)
{
struct gfs2_sbd *sdp = mnt->mnt_sb->s_fs_info;
struct gfs2_args *args = &sdp->sd_args;
if (is_ancestor(mnt->mnt_root, sdp->sd_master_dir))
seq_printf(s, ",meta");
if (args->ar_lockproto[0])
seq_printf(s, ",lockproto=%s", args->ar_lockproto);
if (args->ar_locktable[0])
seq_printf(s, ",locktable=%s", args->ar_locktable);
if (args->ar_hostdata[0])
seq_printf(s, ",hostdata=%s", args->ar_hostdata);
if (args->ar_spectator)
seq_printf(s, ",spectator");
if (args->ar_ignore_local_fs)
seq_printf(s, ",ignore_local_fs");
if (args->ar_localflocks)
seq_printf(s, ",localflocks");
if (args->ar_localcaching)
seq_printf(s, ",localcaching");
if (args->ar_debug)
seq_printf(s, ",debug");
if (args->ar_upgrade)
seq_printf(s, ",upgrade");
if (args->ar_posix_acl)
seq_printf(s, ",acl");
if (args->ar_quota != GFS2_QUOTA_DEFAULT) {
char *state;
switch (args->ar_quota) {
case GFS2_QUOTA_OFF:
state = "off";
break;
case GFS2_QUOTA_ACCOUNT:
state = "account";
break;
case GFS2_QUOTA_ON:
state = "on";
break;
default:
state = "unknown";
break;
}
seq_printf(s, ",quota=%s", state);
}
if (args->ar_suiddir)
seq_printf(s, ",suiddir");
if (args->ar_data != GFS2_DATA_DEFAULT) {
char *state;
switch (args->ar_data) {
case GFS2_DATA_WRITEBACK:
state = "writeback";
break;
case GFS2_DATA_ORDERED:
state = "ordered";
break;
default:
state = "unknown";
break;
}
seq_printf(s, ",data=%s", state);
}
return 0;
}
/*
* We have to (at the moment) hold the inodes main lock to cover
* the gap between unlocking the shared lock on the iopen lock and
* taking the exclusive lock. I'd rather do a shared -> exclusive
* conversion on the iopen lock, but we can change that later. This
* is safe, just less efficient.
*/
static void gfs2_delete_inode(struct inode *inode)
{
struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_holder gh;
int error;
if (!test_bit(GIF_USER, &ip->i_flags))
goto out;
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
if (unlikely(error)) {
gfs2_glock_dq_uninit(&ip->i_iopen_gh);
goto out;
}
gfs2_glock_dq_wait(&ip->i_iopen_gh);
gfs2_holder_reinit(LM_ST_EXCLUSIVE, LM_FLAG_TRY_1CB | GL_NOCACHE, &ip->i_iopen_gh);
error = gfs2_glock_nq(&ip->i_iopen_gh);
if (error)
goto out_truncate;
if (S_ISDIR(inode->i_mode) &&
(ip->i_diskflags & GFS2_DIF_EXHASH)) {
error = gfs2_dir_exhash_dealloc(ip);
if (error)
goto out_unlock;
}
if (ip->i_eattr) {
error = gfs2_ea_dealloc(ip);
if (error)
goto out_unlock;
}
if (!gfs2_is_stuffed(ip)) {
error = gfs2_file_dealloc(ip);
if (error)
goto out_unlock;
}
error = gfs2_dinode_dealloc(ip);
if (error)
goto out_unlock;
out_truncate:
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
goto out_unlock;
/* Needs to be done before glock release & also in a transaction */
truncate_inode_pages(&inode->i_data, 0);
gfs2_trans_end(sdp);
out_unlock:
if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags))
gfs2_glock_dq(&ip->i_iopen_gh);
gfs2_holder_uninit(&ip->i_iopen_gh);
gfs2_glock_dq_uninit(&gh);
if (error && error != GLR_TRYFAILED)
fs_warn(sdp, "gfs2_delete_inode: %d\n", error);
out:
truncate_inode_pages(&inode->i_data, 0);
clear_inode(inode);
}
static struct inode *gfs2_alloc_inode(struct super_block *sb)
{
struct gfs2_inode *ip;
ip = kmem_cache_alloc(gfs2_inode_cachep, GFP_KERNEL);
if (ip) {
ip->i_flags = 0;
ip->i_gl = NULL;
}
return &ip->i_inode;
}
static void gfs2_destroy_inode(struct inode *inode)
{
kmem_cache_free(gfs2_inode_cachep, inode);
}
const struct super_operations gfs2_super_ops = {
.alloc_inode = gfs2_alloc_inode,
.destroy_inode = gfs2_destroy_inode,
.write_inode = gfs2_write_inode,
.delete_inode = gfs2_delete_inode,
.put_super = gfs2_put_super,
.write_super = gfs2_write_super,
.sync_fs = gfs2_sync_fs,
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 19:40:58 -05:00
.freeze_fs = gfs2_freeze,
.unfreeze_fs = gfs2_unfreeze,
.statfs = gfs2_statfs,
.remount_fs = gfs2_remount_fs,
.clear_inode = gfs2_clear_inode,
.drop_inode = gfs2_drop_inode,
.show_options = gfs2_show_options,
};