android_kernel_xiaomi_sm8350/arch/powerpc/boot/dts/kmeter1.dts

528 lines
13 KiB
Plaintext
Raw Normal View History

/*
* Keymile KMETER1 Device Tree Source
*
* 2008 DENX Software Engineering GmbH
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "KMETER1";
compatible = "keymile,KMETER1";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet_piggy2;
ethernet1 = &enet_estar1;
ethernet2 = &enet_estar2;
ethernet3 = &enet_eth1;
ethernet4 = &enet_eth2;
ethernet5 = &enet_eth3;
ethernet6 = &enet_eth4;
serial0 = &serial0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8360@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <32768>; // L1, 32K
i-cache-size = <32768>; // L1, 32K
timebase-frequency = <0>; /* Filled in by U-Boot */
bus-frequency = <0>; /* Filled in by U-Boot */
clock-frequency = <0>; /* Filled in by U-Boot */
};
};
memory {
device_type = "memory";
reg = <0 0>; /* Filled in by U-Boot */
};
soc8360@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8360-immr", "simple-bus";
ranges = <0x0 0xe0000000 0x00200000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; /* Filled in by U-Boot */
pmc: power@b00 {
compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
ipic: pic@700 {
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "fsl,pq2pro-pic", "fsl,ipic";
interrupt-controller;
reg = <0x700 0x100>;
};
par_io@1400 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1400 0x100>;
compatible = "fsl,mpc8360-par_io";
num-ports = <7>;
pio_ucc1: ucc_pin@0 {
reg = <0>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
0 3 1 0 1 0 /* TxD0 */
0 4 1 0 1 0 /* TxD1 */
0 5 1 0 1 0 /* TxD2 */
0 6 1 0 1 0 /* TxD3 */
0 9 2 0 1 0 /* RxD0 */
0 10 2 0 1 0 /* RxD1 */
0 11 2 0 1 0 /* RxD2 */
0 12 2 0 1 0 /* RxD3 */
0 7 1 0 1 0 /* TX_EN */
0 8 1 0 1 0 /* TX_ER */
0 15 2 0 1 0 /* RX_DV */
0 16 2 0 1 0 /* RX_ER */
0 0 2 0 1 0 /* RX_CLK */
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0 /* GTX125 - CLK9 */
>;
};
pio_ucc2: ucc_pin@1 {
reg = <1>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
0 17 1 0 1 0 /* TxD0 */
0 18 1 0 1 0 /* TxD1 */
0 19 1 0 1 0 /* TxD2 */
0 20 1 0 1 0 /* TxD3 */
0 23 2 0 1 0 /* RxD0 */
0 24 2 0 1 0 /* RxD1 */
0 25 2 0 1 0 /* RxD2 */
0 26 2 0 1 0 /* RxD3 */
0 21 1 0 1 0 /* TX_EN */
0 22 1 0 1 0 /* TX_ER */
0 29 2 0 1 0 /* RX_DV */
0 30 2 0 1 0 /* RX_ER */
0 31 2 0 1 0 /* RX_CLK */
2 2 1 0 2 0 /* GTX_CLK - CLK3 */
2 3 2 0 1 0 /* GTX125 - CLK4 */
>;
};
pio_ucc4: ucc_pin@3 {
reg = <3>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */
1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */
1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */
1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */
1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */
1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */
1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */
2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */
>;
};
pio_ucc5: ucc_pin@4 {
reg = <4>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */
3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */
3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */
3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */
3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */
3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */
3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */
>;
};
pio_ucc6: ucc_pin@5 {
reg = <5>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */
3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */
3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */
3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */
3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */
3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */
3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */
>;
};
pio_ucc7: ucc_pin@6 {
reg = <6>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */
4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */
4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */
4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */
4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */
4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */
4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */
>;
};
pio_ucc8: ucc_pin@7 {
reg = <7>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */
4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */
4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */
4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */
4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */
4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */
4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */
2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */
>;
};
};
qe@100000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe";
ranges = <0x0 0x100000 0x100000>;
reg = <0x100000 0x480>;
clock-frequency = <0>; /* Filled in by U-Boot */
brg-frequency = <0>; /* Filled in by U-Boot */
bus-frequency = <0>; /* Filled in by U-Boot */
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x00010000 0x0000c000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0xc000>;
};
};
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
enet_estar1: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk9";
phy-handle = <&phy_estar1>;
phy-connection-type = "rgmii-id";
pio-handle = <&pio_ucc1>;
};
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
enet_estar2: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk4";
phy-handle = <&phy_estar2>;
phy-connection-type = "rgmii-id";
pio-handle = <&pio_ucc2>;
};
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
enet_piggy2: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <4>;
reg = <0x3200 0x200>;
interrupts = <35>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
phy-handle = <&phy_piggy2>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc4>;
};
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
enet_eth1: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <5>;
reg = <0x2400 0x200>;
interrupts = <40>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth1>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc5>;
};
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
enet_eth2: ucc@3400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <6>;
reg = <0x3400 0x200>;
interrupts = <41>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth2>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc6>;
};
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
enet_eth3: ucc@2600 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <7>;
reg = <0x2600 0x200>;
interrupts = <42>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth3>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc7>;
};
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
enet_eth4: ucc@3600 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <8>;
reg = <0x3600 0x200>;
interrupts = <43>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth4>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc8>;
};
mdio@3320 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3320 0x18>;
compatible = "fsl,ucc-mdio";
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
phy_piggy2: ethernet-phy@00 {
reg = <0x0>;
};
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
phy_eth1: ethernet-phy@08 {
reg = <0x08>;
};
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
phy_eth2: ethernet-phy@09 {
reg = <0x09>;
};
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
phy_eth3: ethernet-phy@0a {
reg = <0x0a>;
};
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
phy_eth4: ethernet-phy@0b {
reg = <0x0b>;
};
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
phy_estar1: ethernet-phy@10 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x10>;
};
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
phy_estar2: ethernet-phy@11 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x11>;
};
};
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <32 8 33 8>;
interrupt-parent = <&ipic>;
};
};
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
"simple-bus";
reg = <0xe0005000 0xd8>;
ranges = <0 0 0xf0000000 0x04000000>; /* Filled in by U-Boot */
flash@f0000000,0 {
compatible = "cfi-flash";
/*
* The Intel P30 chip has 2 non-identical chips on
* one die, so we need to define 2 separate regions
* that are scanned by physmap_of independantly.
*/
reg = <0 0x00000000 0x02000000
0 0x02000000 0x02000000>; /* Filled in by U-Boot */
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0 0x40000>;
};
partition@40000 {
label = "env";
reg = <0x40000 0x40000>;
};
partition@80000 {
label = "dtb";
reg = <0x80000 0x20000>;
};
partition@a0000 {
label = "kernel";
reg = <0xa0000 0x300000>;
};
partition@3a0000 {
label = "ramdisk";
reg = <0x3a0000 0x800000>;
};
partition@ba0000 {
label = "user";
reg = <0xba0000 0x3460000>;
};
};
};
};