412 lines
14 KiB
C
412 lines
14 KiB
C
|
/*
|
||
|
* Definitions for a Sony interface CDROM drive.
|
||
|
*
|
||
|
* Corey Minyard (minyard@wf-rch.cirr.com)
|
||
|
*
|
||
|
* Copyright (C) 1993 Corey Minyard
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License as published by
|
||
|
* the Free Software Foundation; either version 2 of the License, or
|
||
|
* (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
* General defines.
|
||
|
*/
|
||
|
#define SONY_XA_DISK_TYPE 0x20
|
||
|
|
||
|
/*
|
||
|
* Offsets (from the base address) and bits for the various write registers
|
||
|
* of the drive.
|
||
|
*/
|
||
|
#define SONY_CMD_REG_OFFSET 0
|
||
|
#define SONY_PARAM_REG_OFFSET 1
|
||
|
#define SONY_WRITE_REG_OFFSET 2
|
||
|
#define SONY_CONTROL_REG_OFFSET 3
|
||
|
# define SONY_ATTN_CLR_BIT 0x01
|
||
|
# define SONY_RES_RDY_CLR_BIT 0x02
|
||
|
# define SONY_DATA_RDY_CLR_BIT 0x04
|
||
|
# define SONY_ATTN_INT_EN_BIT 0x08
|
||
|
# define SONY_RES_RDY_INT_EN_BIT 0x10
|
||
|
# define SONY_DATA_RDY_INT_EN_BIT 0x20
|
||
|
# define SONY_PARAM_CLR_BIT 0x40
|
||
|
# define SONY_DRIVE_RESET_BIT 0x80
|
||
|
|
||
|
/*
|
||
|
* Offsets (from the base address) and bits for the various read registers
|
||
|
* of the drive.
|
||
|
*/
|
||
|
#define SONY_STATUS_REG_OFFSET 0
|
||
|
# define SONY_ATTN_BIT 0x01
|
||
|
# define SONY_RES_RDY_BIT 0x02
|
||
|
# define SONY_DATA_RDY_BIT 0x04
|
||
|
# define SONY_ATTN_INT_ST_BIT 0x08
|
||
|
# define SONY_RES_RDY_INT_ST_BIT 0x10
|
||
|
# define SONY_DATA_RDY_INT_ST_BIT 0x20
|
||
|
# define SONY_DATA_REQUEST_BIT 0x40
|
||
|
# define SONY_BUSY_BIT 0x80
|
||
|
#define SONY_RESULT_REG_OFFSET 1
|
||
|
#define SONY_READ_REG_OFFSET 2
|
||
|
#define SONY_FIFOST_REG_OFFSET 3
|
||
|
# define SONY_PARAM_WRITE_RDY_BIT 0x01
|
||
|
# define SONY_PARAM_REG_EMPTY_BIT 0x02
|
||
|
# define SONY_RES_REG_NOT_EMP_BIT 0x04
|
||
|
# define SONY_RES_REG_FULL_BIT 0x08
|
||
|
|
||
|
#define LOG_START_OFFSET 150 /* Offset of first logical sector */
|
||
|
|
||
|
#define SONY_DETECT_TIMEOUT (8*HZ/10) /* Maximum amount of time
|
||
|
that drive detection code
|
||
|
will wait for response
|
||
|
from drive (in 1/100th's
|
||
|
of seconds). */
|
||
|
|
||
|
#define SONY_JIFFIES_TIMEOUT (10*HZ) /* Maximum number of times the
|
||
|
drive will wait/try for an
|
||
|
operation */
|
||
|
#define SONY_RESET_TIMEOUT HZ /* Maximum number of times the
|
||
|
drive will wait/try a reset
|
||
|
operation */
|
||
|
#define SONY_READY_RETRIES 20000 /* How many times to retry a
|
||
|
spin waiting for a register
|
||
|
to come ready */
|
||
|
|
||
|
#define MAX_CDU31A_RETRIES 3 /* How many times to retry an
|
||
|
operation */
|
||
|
|
||
|
/* Commands to request or set drive control parameters and disc information */
|
||
|
#define SONY_REQ_DRIVE_CONFIG_CMD 0x00 /* Returns s_sony_drive_config */
|
||
|
#define SONY_REQ_DRIVE_MODE_CMD 0x01
|
||
|
#define SONY_REQ_DRIVE_PARAM_CMD 0x02
|
||
|
#define SONY_REQ_MECH_STATUS_CMD 0x03
|
||
|
#define SONY_REQ_AUDIO_STATUS_CMD 0x04
|
||
|
#define SONY_SET_DRIVE_PARAM_CMD 0x10
|
||
|
#define SONY_REQ_TOC_DATA_CMD 0x20 /* Returns s_sony_toc */
|
||
|
#define SONY_REQ_SUBCODE_ADDRESS_CMD 0x21 /* Returns s_sony_subcode */
|
||
|
#define SONY_REQ_UPC_EAN_CMD 0x22
|
||
|
#define SONY_REQ_ISRC_CMD 0x23
|
||
|
#define SONY_REQ_TOC_DATA_SPEC_CMD 0x24 /* Returns s_sony_session_toc */
|
||
|
|
||
|
/* Commands to request information from the drive */
|
||
|
#define SONY_READ_TOC_CMD 0x30 /* let the drive firmware grab the TOC */
|
||
|
#define SONY_SEEK_CMD 0x31
|
||
|
#define SONY_READ_CMD 0x32
|
||
|
#define SONY_READ_BLKERR_STAT_CMD 0x34
|
||
|
#define SONY_ABORT_CMD 0x35
|
||
|
#define SONY_READ_TOC_SPEC_CMD 0x36
|
||
|
|
||
|
/* Commands to control audio */
|
||
|
#define SONY_AUDIO_PLAYBACK_CMD 0x40
|
||
|
#define SONY_AUDIO_STOP_CMD 0x41
|
||
|
#define SONY_AUDIO_SCAN_CMD 0x42
|
||
|
|
||
|
/* Miscellaneous control commands */
|
||
|
#define SONY_EJECT_CMD 0x50
|
||
|
#define SONY_SPIN_UP_CMD 0x51
|
||
|
#define SONY_SPIN_DOWN_CMD 0x52
|
||
|
|
||
|
/* Diagnostic commands */
|
||
|
#define SONY_WRITE_BUFFER_CMD 0x60
|
||
|
#define SONY_READ_BUFFER_CMD 0x61
|
||
|
#define SONY_DIAGNOSTICS_CMD 0x62
|
||
|
|
||
|
|
||
|
/*
|
||
|
* The following are command parameters for the set drive parameter command
|
||
|
*/
|
||
|
#define SONY_SD_DECODE_PARAM 0x00
|
||
|
#define SONY_SD_INTERFACE_PARAM 0x01
|
||
|
#define SONY_SD_BUFFERING_PARAM 0x02
|
||
|
#define SONY_SD_AUDIO_PARAM 0x03
|
||
|
#define SONY_SD_AUDIO_VOLUME 0x04
|
||
|
#define SONY_SD_MECH_CONTROL 0x05
|
||
|
#define SONY_SD_AUTO_SPIN_DOWN_TIME 0x06
|
||
|
|
||
|
/*
|
||
|
* The following are parameter bits for the mechanical control command
|
||
|
*/
|
||
|
#define SONY_AUTO_SPIN_UP_BIT 0x01
|
||
|
#define SONY_AUTO_EJECT_BIT 0x02
|
||
|
#define SONY_DOUBLE_SPEED_BIT 0x04
|
||
|
|
||
|
/*
|
||
|
* The following extract information from the drive configuration about
|
||
|
* the drive itself.
|
||
|
*/
|
||
|
#define SONY_HWC_GET_LOAD_MECH(c) (c.hw_config[0] & 0x03)
|
||
|
#define SONY_HWC_EJECT(c) (c.hw_config[0] & 0x04)
|
||
|
#define SONY_HWC_LED_SUPPORT(c) (c.hw_config[0] & 0x08)
|
||
|
#define SONY_HWC_DOUBLE_SPEED(c) (c.hw_config[0] & 0x10)
|
||
|
#define SONY_HWC_GET_BUF_MEM_SIZE(c) ((c.hw_config[0] & 0xc0) >> 6)
|
||
|
#define SONY_HWC_AUDIO_PLAYBACK(c) (c.hw_config[1] & 0x01)
|
||
|
#define SONY_HWC_ELECTRIC_VOLUME(c) (c.hw_config[1] & 0x02)
|
||
|
#define SONY_HWC_ELECTRIC_VOLUME_CTL(c) (c.hw_config[1] & 0x04)
|
||
|
|
||
|
#define SONY_HWC_CADDY_LOAD_MECH 0x00
|
||
|
#define SONY_HWC_TRAY_LOAD_MECH 0x01
|
||
|
#define SONY_HWC_POPUP_LOAD_MECH 0x02
|
||
|
#define SONY_HWC_UNKWN_LOAD_MECH 0x03
|
||
|
|
||
|
#define SONY_HWC_8KB_BUFFER 0x00
|
||
|
#define SONY_HWC_32KB_BUFFER 0x01
|
||
|
#define SONY_HWC_64KB_BUFFER 0x02
|
||
|
#define SONY_HWC_UNKWN_BUFFER 0x03
|
||
|
|
||
|
/*
|
||
|
* This is the complete status returned from the drive configuration request
|
||
|
* command.
|
||
|
*/
|
||
|
struct s_sony_drive_config
|
||
|
{
|
||
|
unsigned char exec_status[2];
|
||
|
char vendor_id[8];
|
||
|
char product_id[16];
|
||
|
char product_rev_level[8];
|
||
|
unsigned char hw_config[2];
|
||
|
};
|
||
|
|
||
|
/* The following is returned from the request subcode address command */
|
||
|
struct s_sony_subcode
|
||
|
{
|
||
|
unsigned char exec_status[2];
|
||
|
unsigned char address :4;
|
||
|
unsigned char control :4;
|
||
|
unsigned char track_num;
|
||
|
unsigned char index_num;
|
||
|
unsigned char rel_msf[3];
|
||
|
unsigned char reserved1;
|
||
|
unsigned char abs_msf[3];
|
||
|
};
|
||
|
|
||
|
#define MAX_TRACKS 100 /* The maximum tracks a disk may have. */
|
||
|
/*
|
||
|
* The following is returned from the request TOC (Table Of Contents) command.
|
||
|
* (last_track_num-first_track_num+1) values are valid in tracks.
|
||
|
*/
|
||
|
struct s_sony_toc
|
||
|
{
|
||
|
unsigned char exec_status[2];
|
||
|
unsigned char address0 :4;
|
||
|
unsigned char control0 :4;
|
||
|
unsigned char point0;
|
||
|
unsigned char first_track_num;
|
||
|
unsigned char disk_type;
|
||
|
unsigned char dummy0;
|
||
|
unsigned char address1 :4;
|
||
|
unsigned char control1 :4;
|
||
|
unsigned char point1;
|
||
|
unsigned char last_track_num;
|
||
|
unsigned char dummy1;
|
||
|
unsigned char dummy2;
|
||
|
unsigned char address2 :4;
|
||
|
unsigned char control2 :4;
|
||
|
unsigned char point2;
|
||
|
unsigned char lead_out_start_msf[3];
|
||
|
struct
|
||
|
{
|
||
|
unsigned char address :4;
|
||
|
unsigned char control :4;
|
||
|
unsigned char track;
|
||
|
unsigned char track_start_msf[3];
|
||
|
} tracks[MAX_TRACKS];
|
||
|
|
||
|
unsigned int lead_out_start_lba;
|
||
|
};
|
||
|
|
||
|
struct s_sony_session_toc
|
||
|
{
|
||
|
unsigned char exec_status[2];
|
||
|
unsigned char session_number;
|
||
|
unsigned char address0 :4;
|
||
|
unsigned char control0 :4;
|
||
|
unsigned char point0;
|
||
|
unsigned char first_track_num;
|
||
|
unsigned char disk_type;
|
||
|
unsigned char dummy0;
|
||
|
unsigned char address1 :4;
|
||
|
unsigned char control1 :4;
|
||
|
unsigned char point1;
|
||
|
unsigned char last_track_num;
|
||
|
unsigned char dummy1;
|
||
|
unsigned char dummy2;
|
||
|
unsigned char address2 :4;
|
||
|
unsigned char control2 :4;
|
||
|
unsigned char point2;
|
||
|
unsigned char lead_out_start_msf[3];
|
||
|
unsigned char addressb0 :4;
|
||
|
unsigned char controlb0 :4;
|
||
|
unsigned char pointb0;
|
||
|
unsigned char next_poss_prog_area_msf[3];
|
||
|
unsigned char num_mode_5_pointers;
|
||
|
unsigned char max_start_outer_leadout_msf[3];
|
||
|
unsigned char addressb1 :4;
|
||
|
unsigned char controlb1 :4;
|
||
|
unsigned char pointb1;
|
||
|
unsigned char dummyb0_1[4];
|
||
|
unsigned char num_skip_interval_pointers;
|
||
|
unsigned char num_skip_track_assignments;
|
||
|
unsigned char dummyb0_2;
|
||
|
unsigned char addressb2 :4;
|
||
|
unsigned char controlb2 :4;
|
||
|
unsigned char pointb2;
|
||
|
unsigned char tracksb2[7];
|
||
|
unsigned char addressb3 :4;
|
||
|
unsigned char controlb3 :4;
|
||
|
unsigned char pointb3;
|
||
|
unsigned char tracksb3[7];
|
||
|
unsigned char addressb4 :4;
|
||
|
unsigned char controlb4 :4;
|
||
|
unsigned char pointb4;
|
||
|
unsigned char tracksb4[7];
|
||
|
unsigned char addressc0 :4;
|
||
|
unsigned char controlc0 :4;
|
||
|
unsigned char pointc0;
|
||
|
unsigned char dummyc0[7];
|
||
|
struct
|
||
|
{
|
||
|
unsigned char address :4;
|
||
|
unsigned char control :4;
|
||
|
unsigned char track;
|
||
|
unsigned char track_start_msf[3];
|
||
|
} tracks[MAX_TRACKS];
|
||
|
|
||
|
unsigned int start_track_lba;
|
||
|
unsigned int lead_out_start_lba;
|
||
|
unsigned int mint;
|
||
|
unsigned int maxt;
|
||
|
};
|
||
|
|
||
|
struct s_all_sessions_toc
|
||
|
{
|
||
|
unsigned char sessions;
|
||
|
unsigned int track_entries;
|
||
|
unsigned char first_track_num;
|
||
|
unsigned char last_track_num;
|
||
|
unsigned char disk_type;
|
||
|
unsigned char lead_out_start_msf[3];
|
||
|
struct
|
||
|
{
|
||
|
unsigned char address :4;
|
||
|
unsigned char control :4;
|
||
|
unsigned char track;
|
||
|
unsigned char track_start_msf[3];
|
||
|
} tracks[MAX_TRACKS];
|
||
|
|
||
|
unsigned int start_track_lba;
|
||
|
unsigned int lead_out_start_lba;
|
||
|
};
|
||
|
|
||
|
|
||
|
/*
|
||
|
* The following are errors returned from the drive.
|
||
|
*/
|
||
|
|
||
|
/* Command error group */
|
||
|
#define SONY_ILL_CMD_ERR 0x10
|
||
|
#define SONY_ILL_PARAM_ERR 0x11
|
||
|
|
||
|
/* Mechanism group */
|
||
|
#define SONY_NOT_LOAD_ERR 0x20
|
||
|
#define SONY_NO_DISK_ERR 0x21
|
||
|
#define SONY_NOT_SPIN_ERR 0x22
|
||
|
#define SONY_SPIN_ERR 0x23
|
||
|
#define SONY_SPINDLE_SERVO_ERR 0x25
|
||
|
#define SONY_FOCUS_SERVO_ERR 0x26
|
||
|
#define SONY_EJECT_MECH_ERR 0x29
|
||
|
#define SONY_AUDIO_PLAYING_ERR 0x2a
|
||
|
#define SONY_EMERGENCY_EJECT_ERR 0x2c
|
||
|
|
||
|
/* Seek error group */
|
||
|
#define SONY_FOCUS_ERR 0x30
|
||
|
#define SONY_FRAME_SYNC_ERR 0x31
|
||
|
#define SONY_SUBCODE_ADDR_ERR 0x32
|
||
|
#define SONY_BLOCK_SYNC_ERR 0x33
|
||
|
#define SONY_HEADER_ADDR_ERR 0x34
|
||
|
|
||
|
/* Read error group */
|
||
|
#define SONY_ILL_TRACK_R_ERR 0x40
|
||
|
#define SONY_MODE_0_R_ERR 0x41
|
||
|
#define SONY_ILL_MODE_R_ERR 0x42
|
||
|
#define SONY_ILL_BLOCK_SIZE_R_ERR 0x43
|
||
|
#define SONY_MODE_R_ERR 0x44
|
||
|
#define SONY_FORM_R_ERR 0x45
|
||
|
#define SONY_LEAD_OUT_R_ERR 0x46
|
||
|
#define SONY_BUFFER_OVERRUN_R_ERR 0x47
|
||
|
|
||
|
/* Data error group */
|
||
|
#define SONY_UNREC_CIRC_ERR 0x53
|
||
|
#define SONY_UNREC_LECC_ERR 0x57
|
||
|
|
||
|
/* Subcode error group */
|
||
|
#define SONY_NO_TOC_ERR 0x60
|
||
|
#define SONY_SUBCODE_DATA_NVAL_ERR 0x61
|
||
|
#define SONY_FOCUS_ON_TOC_READ_ERR 0x63
|
||
|
#define SONY_FRAME_SYNC_ON_TOC_READ_ERR 0x64
|
||
|
#define SONY_TOC_DATA_ERR 0x65
|
||
|
|
||
|
/* Hardware failure group */
|
||
|
#define SONY_HW_FAILURE_ERR 0x70
|
||
|
#define SONY_LEAD_IN_A_ERR 0x91
|
||
|
#define SONY_LEAD_OUT_A_ERR 0x92
|
||
|
#define SONY_DATA_TRACK_A_ERR 0x93
|
||
|
|
||
|
/*
|
||
|
* The following are returned from the Read With Block Error Status command.
|
||
|
* They are not errors but information (Errors from the 0x5x group above may
|
||
|
* also be returned
|
||
|
*/
|
||
|
#define SONY_NO_CIRC_ERR_BLK_STAT 0x50
|
||
|
#define SONY_NO_LECC_ERR_BLK_STAT 0x54
|
||
|
#define SONY_RECOV_LECC_ERR_BLK_STAT 0x55
|
||
|
#define SONY_NO_ERR_DETECTION_STAT 0x59
|
||
|
|
||
|
/*
|
||
|
* The following is not an error returned by the drive, but by the code
|
||
|
* that talks to the drive. It is returned because of a timeout.
|
||
|
*/
|
||
|
#define SONY_TIMEOUT_OP_ERR 0x01
|
||
|
#define SONY_SIGNAL_OP_ERR 0x02
|
||
|
#define SONY_BAD_DATA_ERR 0x03
|
||
|
|
||
|
|
||
|
/*
|
||
|
* The following are attention code for asynchronous events from the drive.
|
||
|
*/
|
||
|
|
||
|
/* Standard attention group */
|
||
|
#define SONY_EMER_EJECT_ATTN 0x2c
|
||
|
#define SONY_HW_FAILURE_ATTN 0x70
|
||
|
#define SONY_MECH_LOADED_ATTN 0x80
|
||
|
#define SONY_EJECT_PUSHED_ATTN 0x81
|
||
|
|
||
|
/* Audio attention group */
|
||
|
#define SONY_AUDIO_PLAY_DONE_ATTN 0x90
|
||
|
#define SONY_LEAD_IN_ERR_ATTN 0x91
|
||
|
#define SONY_LEAD_OUT_ERR_ATTN 0x92
|
||
|
#define SONY_DATA_TRACK_ERR_ATTN 0x93
|
||
|
#define SONY_AUDIO_PLAYBACK_ERR_ATTN 0x94
|
||
|
|
||
|
/* Auto spin up group */
|
||
|
#define SONY_SPIN_UP_COMPLETE_ATTN 0x24
|
||
|
#define SONY_SPINDLE_SERVO_ERR_ATTN 0x25
|
||
|
#define SONY_FOCUS_SERVO_ERR_ATTN 0x26
|
||
|
#define SONY_TOC_READ_DONE_ATTN 0x62
|
||
|
#define SONY_FOCUS_ON_TOC_READ_ERR_ATTN 0x63
|
||
|
#define SONY_SYNC_ON_TOC_READ_ERR_ATTN 0x65
|
||
|
|
||
|
/* Auto eject group */
|
||
|
#define SONY_SPIN_DOWN_COMPLETE_ATTN 0x27
|
||
|
#define SONY_EJECT_COMPLETE_ATTN 0x28
|
||
|
#define SONY_EJECT_MECH_ERR_ATTN 0x29
|