2005-05-28 18:52:09 -04:00
|
|
|
/*
|
|
|
|
*
|
|
|
|
* (C) Copyright 2003
|
|
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
*
|
|
|
|
* (C) Copyright 2004 Red Hat, Inc.
|
|
|
|
*
|
|
|
|
* 2005 (c) MontaVista Software, Inc.
|
|
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
|
|
*
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
* project.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
|
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <asm/machdep.h>
|
|
|
|
#include <asm/pci-bridge.h>
|
|
|
|
#include <asm/immap_cpm2.h>
|
|
|
|
#include <asm/mpc8260.h>
|
|
|
|
#include <asm/cpm2.h>
|
|
|
|
|
|
|
|
#include "m82xx_pci.h"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Interrupt routing
|
|
|
|
*/
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
|
|
|
|
{
|
|
|
|
static char pci_irq_table[][4] =
|
|
|
|
/*
|
|
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
|
|
* A B C D
|
|
|
|
*/
|
|
|
|
{
|
|
|
|
{ PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */
|
|
|
|
{ PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */
|
|
|
|
{ PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */
|
|
|
|
};
|
|
|
|
|
|
|
|
const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
|
|
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
pq2pci_mask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
int bit = irq - NR_CPM_INTS;
|
|
|
|
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
pq2pci_unmask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
int bit = irq - NR_CPM_INTS;
|
|
|
|
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
pq2pci_mask_and_ack(unsigned int irq)
|
|
|
|
{
|
|
|
|
int bit = irq - NR_CPM_INTS;
|
|
|
|
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
pq2pci_end_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
int bit = irq - NR_CPM_INTS;
|
|
|
|
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct hw_interrupt_type pq2pci_ic = {
|
|
|
|
"PQ2 PCI",
|
|
|
|
NULL,
|
|
|
|
NULL,
|
|
|
|
pq2pci_unmask_irq,
|
|
|
|
pq2pci_mask_irq,
|
|
|
|
pq2pci_mask_and_ack,
|
|
|
|
pq2pci_end_irq,
|
|
|
|
0
|
|
|
|
};
|
|
|
|
|
|
|
|
static irqreturn_t
|
|
|
|
pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs)
|
|
|
|
{
|
|
|
|
unsigned long stat, mask, pend;
|
|
|
|
int bit;
|
|
|
|
|
|
|
|
for(;;) {
|
|
|
|
stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
|
|
|
|
mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
|
|
|
|
pend = stat & ~mask & 0xf0000000;
|
|
|
|
if (!pend)
|
|
|
|
break;
|
|
|
|
for (bit = 0; pend != 0; ++bit, pend <<= 1) {
|
|
|
|
if (pend & 0x80000000)
|
|
|
|
__do_IRQ(NR_CPM_INTS + bit, regs);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irqaction pq2pci_irqaction = {
|
|
|
|
.handler = pq2pci_irq_demux,
|
2006-07-01 22:29:22 -04:00
|
|
|
.flags = IRQF_DISABLED,
|
2005-05-28 18:52:09 -04:00
|
|
|
.mask = CPU_MASK_NONE,
|
|
|
|
.name = "PQ2 PCI cascade",
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
pq2pci_init_irq(void)
|
|
|
|
{
|
|
|
|
int irq;
|
|
|
|
volatile cpm2_map_t *immap = cpm2_immr;
|
|
|
|
#if defined CONFIG_ADS8272
|
|
|
|
/* configure chip select for PCI interrupt controller */
|
|
|
|
immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
|
|
|
|
immap->im_memctl.memc_or3 = 0xffff8010;
|
|
|
|
#elif defined CONFIG_PQ2FADS
|
|
|
|
immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
|
|
|
|
immap->im_memctl.memc_or8 = 0xffff8010;
|
|
|
|
#endif
|
|
|
|
for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
|
[PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.
While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.
The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.
This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.
As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.
The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.
We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.
This patch:
rename desc->handler to desc->chip.
Originally i did not want to do this, because it's a big patch. But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.
I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.
So lets get over with this quickly. The conversion was done automatically
via scripts and converts all the code in the kernel.
This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.
[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 05:24:36 -04:00
|
|
|
irq_desc[irq].chip = &pq2pci_ic;
|
2005-05-28 18:52:09 -04:00
|
|
|
|
|
|
|
/* make PCI IRQ level sensitive */
|
|
|
|
immap->im_intctl.ic_siexr &=
|
|
|
|
~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
|
|
|
|
|
|
|
|
/* mask all PCI interrupts */
|
|
|
|
*(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
|
|
|
|
|
|
|
|
/* install the demultiplexer for the PCI cascade interrupt */
|
|
|
|
setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
pq2pci_exclude_device(u_char bus, u_char devfn)
|
|
|
|
{
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* PCI bus configuration registers.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
pq2ads_setup_pci(struct pci_controller *hose)
|
|
|
|
{
|
|
|
|
__u32 val;
|
|
|
|
volatile cpm2_map_t *immap = cpm2_immr;
|
|
|
|
bd_t* binfo = (bd_t*) __res;
|
|
|
|
u32 sccr = immap->im_clkrst.car_sccr;
|
|
|
|
uint pci_div,freq,time;
|
|
|
|
/* PCI int lowest prio */
|
|
|
|
/* Each 4 bits is a device bus request and the MS 4bits
|
|
|
|
is highest priority */
|
|
|
|
/* Bus 4bit value
|
|
|
|
--- ----------
|
|
|
|
CPM high 0b0000
|
|
|
|
CPM middle 0b0001
|
|
|
|
CPM low 0b0010
|
|
|
|
PCI reguest 0b0011
|
|
|
|
Reserved 0b0100
|
|
|
|
Reserved 0b0101
|
|
|
|
Internal Core 0b0110
|
|
|
|
External Master 1 0b0111
|
|
|
|
External Master 2 0b1000
|
|
|
|
External Master 3 0b1001
|
|
|
|
The rest are reserved
|
|
|
|
*/
|
|
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
|
|
|
|
/* park bus on core */
|
|
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
|
|
|
|
/*
|
|
|
|
* Set up master windows that allow the CPU to access PCI space. These
|
|
|
|
* windows are set up using the two SIU PCIBR registers.
|
|
|
|
*/
|
|
|
|
|
|
|
|
immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
|
|
|
|
immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
|
|
|
|
|
|
|
|
#ifdef M82xx_PCI_SEC_WND_SIZE
|
|
|
|
immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
|
|
|
|
immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if defined CONFIG_ADS8272
|
|
|
|
immap->im_siu_conf.siu_82xx.sc_siumcr =
|
|
|
|
(immap->im_siu_conf.siu_82xx.sc_siumcr &
|
|
|
|
~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
|
|
|
|
SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
|
|
|
|
SIUMCR_LBPC11 | SIUMCR_APPC11 |
|
|
|
|
SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
|
|
|
|
SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
|
|
|
|
SIUMCR_APPC10 | SIUMCR_CS10PC00 |
|
|
|
|
SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
|
|
|
|
|
|
|
|
#elif defined CONFIG_PQ2FADS
|
|
|
|
/*
|
|
|
|
* Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
|
|
|
|
* and local bus for PCI (SIUMCR [LBPC]).
|
|
|
|
*/
|
2005-07-27 14:44:09 -04:00
|
|
|
immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.siu_82xx.sc_siumcr &
|
|
|
|
~(SIUMCR_L2CPC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
|
|
|
|
SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10);
|
2005-05-28 18:52:09 -04:00
|
|
|
#endif
|
|
|
|
/* Enable PCI */
|
|
|
|
immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
|
|
|
|
|
|
|
|
pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
|
|
|
|
( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
|
|
|
|
freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
|
2005-12-01 03:51:15 -05:00
|
|
|
time = (int)66666666/freq;
|
|
|
|
|
2005-05-28 18:52:09 -04:00
|
|
|
/* due to PCI Local Bus spec, some devices needs to wait such a long
|
|
|
|
time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
|
|
|
|
printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
|
|
|
|
(time==1) ? "0.5 seconds":"1 second" );
|
|
|
|
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
for(i=0;i<(500*time);i++)
|
|
|
|
udelay(1000);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* setup ATU registers */
|
|
|
|
immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
|
|
|
|
((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
|
|
|
|
immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
|
|
|
|
immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
|
|
|
|
|
|
|
|
/* Set-up non-prefetchable window */
|
|
|
|
immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
|
|
|
|
immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
|
|
|
|
immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
|
|
|
|
|
|
|
|
/* Set-up prefetchable window */
|
|
|
|
immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
|
|
|
|
(~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
|
|
|
|
immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
|
|
|
|
immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
|
|
|
|
|
|
|
|
/* Inbound transactions from PCI memory space */
|
|
|
|
immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
|
|
|
|
((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
|
|
|
|
immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
|
|
|
|
immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
|
|
|
|
|
|
|
|
#if defined CONFIG_ADS8272
|
|
|
|
/* PCI int highest prio */
|
|
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
|
|
|
|
#elif defined CONFIG_PQ2FADS
|
|
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
|
|
|
|
#endif
|
|
|
|
/* park bus on PCI */
|
|
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
|
|
|
|
|
|
|
|
/* Enable bus mastering and inbound memory transactions */
|
|
|
|
early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
|
|
|
|
val &= 0xffff0000;
|
|
|
|
val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
|
|
|
|
early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
void __init pq2_find_bridges(void)
|
|
|
|
{
|
2005-10-20 06:57:05 -04:00
|
|
|
extern int pci_assign_all_buses;
|
2005-05-28 18:52:09 -04:00
|
|
|
struct pci_controller * hose;
|
|
|
|
int host_bridge;
|
|
|
|
|
2005-10-24 15:50:46 -04:00
|
|
|
pci_assign_all_buses = 1;
|
2005-05-28 18:52:09 -04:00
|
|
|
|
|
|
|
hose = pcibios_alloc_controller();
|
|
|
|
|
|
|
|
if (!hose)
|
|
|
|
return;
|
|
|
|
|
|
|
|
ppc_md.pci_swizzle = common_swizzle;
|
|
|
|
|
|
|
|
hose->first_busno = 0;
|
|
|
|
hose->bus_offset = 0;
|
|
|
|
hose->last_busno = 0xff;
|
|
|
|
|
|
|
|
#ifdef CONFIG_ADS8272
|
|
|
|
hose->set_cfg_type = 1;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
setup_m8260_indirect_pci(hose,
|
|
|
|
(unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
|
|
|
|
(unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
|
|
|
|
|
|
|
|
/* Make sure it is a supported bridge */
|
|
|
|
early_read_config_dword(hose,
|
|
|
|
0,
|
|
|
|
PCI_DEVFN(0,0),
|
|
|
|
PCI_VENDOR_ID,
|
|
|
|
&host_bridge);
|
|
|
|
switch (host_bridge) {
|
|
|
|
case PCI_DEVICE_ID_MPC8265:
|
|
|
|
break;
|
|
|
|
case PCI_DEVICE_ID_MPC8272:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
printk("Attempting to use unrecognized host bridge ID"
|
|
|
|
" 0x%08x.\n", host_bridge);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
pq2ads_setup_pci(hose);
|
|
|
|
|
|
|
|
hose->io_space.start = M82xx_PCI_LOWER_IO;
|
|
|
|
hose->io_space.end = M82xx_PCI_UPPER_IO;
|
|
|
|
hose->mem_space.start = M82xx_PCI_LOWER_MEM;
|
|
|
|
hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
|
|
|
|
hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
|
|
|
|
|
|
|
|
isa_io_base =
|
|
|
|
(unsigned long) ioremap(M82xx_PCI_IO_BASE,
|
|
|
|
M82xx_PCI_IO_SIZE);
|
|
|
|
hose->io_base_virt = (void *) isa_io_base;
|
|
|
|
|
|
|
|
/* setup resources */
|
|
|
|
pci_init_resource(&hose->mem_resources[0],
|
|
|
|
M82xx_PCI_LOWER_MEM,
|
|
|
|
M82xx_PCI_UPPER_MEM,
|
|
|
|
IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
|
|
|
|
|
|
|
|
pci_init_resource(&hose->mem_resources[1],
|
|
|
|
M82xx_PCI_LOWER_MMIO,
|
|
|
|
M82xx_PCI_UPPER_MMIO,
|
|
|
|
IORESOURCE_MEM, "PCI memory");
|
|
|
|
|
|
|
|
pci_init_resource(&hose->io_resource,
|
|
|
|
M82xx_PCI_LOWER_IO,
|
|
|
|
M82xx_PCI_UPPER_IO,
|
|
|
|
IORESOURCE_IO | 1, "PCI I/O");
|
|
|
|
|
|
|
|
ppc_md.pci_exclude_device = pq2pci_exclude_device;
|
|
|
|
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
|
|
|
|
|
|
|
|
ppc_md.pci_map_irq = pq2pci_map_irq;
|
|
|
|
ppc_md.pcibios_fixup = NULL;
|
|
|
|
ppc_md.pcibios_fixup_bus = NULL;
|
|
|
|
|
|
|
|
}
|