android_kernel_xiaomi_sm8350/kernel/irq/migration.c

69 lines
1.5 KiB
C
Raw Normal View History

#include <linux/irq.h>
#include <linux/interrupt.h>
#include "internals.h"
[PATCH] genirq: irq: add moved_masked_irq Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:29 -04:00
void move_masked_irq(int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
[PATCH] genirq: irq: convert the move_irq flag from a 32bit word to a single bit The primary aim of this patchset is to remove maintenances problems caused by the irq infrastructure. The two big issues I address are an artificially small cap on the number of irqs, and that MSI assumes vector == irq. My primary focus is on x86_64 but I have touched other architectures where necessary to keep them from breaking. - To increase the number of irqs I modify the code to look at the (cpu, vector) pair instead of just looking at the vector. With a large number of irqs available systems with a large irq count no longer need to compress their irq numbers to fit. Removing a lot of brittle special cases. For acpi guys the result is that irq == gsi. - Addressing the fact that MSI assumes irq == vector takes a few more patches. But suffice it to say when I am done none of the generic irq code even knows what a vector is. In quick testing on a large Unisys x86_64 machine we stumbled over at least one driver that assumed that NR_IRQS could always fit into an 8 bit number. This driver is clearly buggy today. But this has become a class of bugs that it is now much easier to hit. This patch: This is a minor space optimization. In practice I don't think this has any affect because of our alignment constraints and the other fields but there is not point in chewing up an uncessary word and since we already read the flag field this should improve the cache hit ratio of the irq handler. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:27 -04:00
if (likely(!(desc->status & IRQ_MOVE_PENDING)))
return;
/*
* Paranoia: cpu-local interrupts shouldn't be calling in here anyway.
*/
if (CHECK_IRQ_PER_CPU(desc->status)) {
WARN_ON(1);
return;
}
[PATCH] genirq: irq: convert the move_irq flag from a 32bit word to a single bit The primary aim of this patchset is to remove maintenances problems caused by the irq infrastructure. The two big issues I address are an artificially small cap on the number of irqs, and that MSI assumes vector == irq. My primary focus is on x86_64 but I have touched other architectures where necessary to keep them from breaking. - To increase the number of irqs I modify the code to look at the (cpu, vector) pair instead of just looking at the vector. With a large number of irqs available systems with a large irq count no longer need to compress their irq numbers to fit. Removing a lot of brittle special cases. For acpi guys the result is that irq == gsi. - Addressing the fact that MSI assumes irq == vector takes a few more patches. But suffice it to say when I am done none of the generic irq code even knows what a vector is. In quick testing on a large Unisys x86_64 machine we stumbled over at least one driver that assumed that NR_IRQS could always fit into an 8 bit number. This driver is clearly buggy today. But this has become a class of bugs that it is now much easier to hit. This patch: This is a minor space optimization. In practice I don't think this has any affect because of our alignment constraints and the other fields but there is not point in chewing up an uncessary word and since we already read the flag field this should improve the cache hit ratio of the irq handler. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:27 -04:00
desc->status &= ~IRQ_MOVE_PENDING;
if (unlikely(cpumask_empty(desc->pending_mask)))
return;
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 05:24:36 -04:00
if (!desc->chip->set_affinity)
return;
assert_spin_locked(&desc->lock);
/*
* If there was a valid mask to work with, please
* do the disable, re-program, enable sequence.
* This is *not* particularly important for level triggered
* but in a edge trigger case, we might be setting rte
* when an active trigger is comming in. This could
* cause some ioapics to mal-function.
* Being paranoid i guess!
[PATCH] genirq: irq: add moved_masked_irq Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:29 -04:00
*
* For correct operation this depends on the caller
* masking the irqs.
*/
if (likely(cpumask_any_and(desc->pending_mask, cpu_online_mask)
< nr_cpu_ids))
if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
cpumask_copy(desc->affinity, desc->pending_mask);
irq_set_thread_affinity(desc);
}
cpumask_clear(desc->pending_mask);
}
[PATCH] genirq: irq: add moved_masked_irq Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:29 -04:00
void move_native_irq(int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
[PATCH] genirq: irq: add moved_masked_irq Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:29 -04:00
if (likely(!(desc->status & IRQ_MOVE_PENDING)))
return;
if (unlikely(desc->status & IRQ_DISABLED))
return;
[PATCH] genirq: irq: add moved_masked_irq Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:29 -04:00
desc->chip->mask(irq);
[PATCH] genirq: irq: add moved_masked_irq Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:29 -04:00
move_masked_irq(irq);
desc->chip->unmask(irq);
[PATCH] genirq: irq: add moved_masked_irq Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 05:16:29 -04:00
}