lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5e8351de74
android_kernel_xiaomi_sm8350/arch/arm/configs/exynos_defconfig

136 lines
2.9 KiB
Plaintext
Raw Normal View History

ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_SYSVIPC=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_EXYNOS=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_S3C_LOWLEVEL_UART_PORT=3
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_S3C24XX_PWM=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_MACH_EXYNOS4_DT=y
CONFIG_SMP=y
ARM: exynos_defconfig: increase CONFIG_NR_CPUS value to 8 Current CONFIG_NR_CPUS value (2) is too small for: - EXYNOS4412 (4 cores) - EXYNOS5440 (4 cores) - EXYNOS5410 (8 cores) - EXYNOS5420 (8 cores) Set CONFIG_NR_CPUS to 8 so it is correct for all currently supported SoCs. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-01 17:33:38 -05:00
CONFIG_NR_CPUS=8
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_PREEMPT=y
CONFIG_AEABI=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_BLK_DEV_CRYPTOLOOP=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_INPUT_EVDEV=y
ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers Many of the boards use GPIO-mapped buttons for generic input. For Arndale board, these buttons also serve as wakeup source. And the issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based systems. Hence it would be better to re-enable RTC support for EXYNOS5250. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [mturquette@linaro.org: ack on RTC enabling] Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18 11:35:01 -04:00
CONFIG_KEYBOARD_GPIO=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_KEYBOARD_CROS_EC=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_CYAPA=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_HW_RANDOM=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_I2C=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount High speed I2C is used on Exynos5 based SoCs. Enable it. The MMC partition for Root filesystem cannot be mounted without this enabling HS-I2C and regulators on many boards are connected HS-I2C bus so the regulators don't come by default without this. Actually, we are not able to get arndale-octa board to boot and mount an MMC partition without this change. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Tested-by: Javi Merino <javi.merino@arm.com> [kgene.kim@samsung.com: modified description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-14 15:14:16 -04:00
CONFIG_I2C_EXYNOS5=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_I2C_S3C2410=y
CONFIG_DEBUG_GPIO=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
# CONFIG_HWMON is not set
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_SEC_CORE=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_MFD_TPS65090=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77686=y
Linux 3.13-rc5 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQEcBAABAgAGBQJSt1TYAAoJEHm+PkMAQRiGvWgH/iWg8TmEWz4KUKuHthuUi0uh 9+2YDN+4k577Xa0obaG24giQeqkCdxMr3oJrS3FO9jeAmaNRHEGhxUPneisb7RtN 9jIVsz5bPa9/DcK9nqtaUQdvA0O5AWTE6AAPmwleTVy+8CygBo987T2uGELnQCSR FrKCrMePc7Pj0uthMVXrpJ17Ffm/j7jkfRtPhrxHJyngh3jEux+tPbpynH/aKuO2 47unsSQimoFk7n2SPFvNu3E/vZE2xVbu5SH9MCl5yyiCifFjpi3B71LV/FW51lvm cK8Jzn2BmYDygRFjnZfq4zJHqYJCBHzpjCLWmR37Dm/JS91aGq3+Cg0stDP8UTs= =+Hcn -----END PGP SIGNATURE----- Merge tag 'v3.13-rc5' into next/boards Need a newer base version to get a regulator fix for Samsung platforms that they enable building in a defconfig. Linux 3.13-rc5
2013-12-29 00:37:03 -05:00
CONFIG_REGULATOR_S2MPS11=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_REGULATOR_S5M8767=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_REGULATOR_TPS65090=y
CONFIG_FB=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_SIMPLE=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
CONFIG_EXYNOS_DP=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_7x14=y
CONFIG_LOGO=y
CONFIG_USB=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_USB_EHCI_HCD=y
ARM: exynos_defconfig: Update EHCI config entry Commit 29824c167bea ("USB: host: Rename ehci-s5p to ehci-exynos") renamed the config entry of EHCI host driver. Similar change needs to be done in exynos_defconfig as well. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-15 12:02:33 -05:00
CONFIG_USB_EHCI_EXYNOS=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
CONFIG_USB_PHY=y
CONFIG_SAMSUNG_USB2PHY=y
CONFIG_SAMSUNG_USB3PHY=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_EXYNOS=y
ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers Many of the boards use GPIO-mapped buttons for generic input. For Arndale board, these buttons also serve as wakeup source. And the issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based systems. Hence it would be better to re-enable RTC support for EXYNOS5250. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [mturquette@linaro.org: ack on RTC enabling] Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18 11:35:01 -04:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_S3C=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_COMMON_CLK_MAX77686=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_PRINTK_TIME=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 16:58:19 -04:00
CONFIG_CRYPTO_SHA256=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16 19:43:44 -04:00
CONFIG_CRC_CCITT=y
Reference in New Issue Copy Permalink