lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5e8351de74
android_kernel_xiaomi_sm8350/arch/arm/mach-kirkwood/Makefile

15 lines
657 B
Makefile
Raw Normal View History

ARM: kirkwood: Separate board-dt from common and pcie code. In order to be able to move DT support into mach-mvebu, the DT code needs to be cleanly separated from common and pcie code. Import the needed bits of these files into board-dt.c. The "common" code then becomes purely legacy, supporting non-DT boards, so reflect this in the Makefile targets. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22 14:14:47 -05:00
obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o
ARM: kirkwood: Add standby support Implements standby support for Kirkwood SoC. When the SoC enters standby state the memory PM units are disabled, the DDR is set in self-refresh mode, and the CPU is set in WFI. At this point there's no clock gating, as that is considered each driver's task. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-22 11:49:07 -04:00
obj-$(CONFIG_PM) += pm.o
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-08 18:41:27 -04:00
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
[ARM] Kirkwood: remove duplicated code in LaCie setup files Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19 09:33:59 -04:00
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-08 18:41:27 -04:00
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
[ARM] Kirkwood: Add support for HP t5325 Thin Client Add support for the HP t5325 Thin Client. This thin client is based on a Marvell Kirkwood chip at 1.2 GHz and features 512 MB RAM, 512 MB SATA-attached flash and an XGI Volari Z11 GPU. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-06-13 15:00:16 -04:00
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-08 18:41:27 -04:00
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
[ARM] Kirkwood: CPU idle driver The patch adds support for Kirkwood cpu idle. Two idle states are defined: 1. Wait-for-interrupt (replacing default kirkwood wfi) 2. Wait-for-interrupt and DDR self refresh Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-24 10:10:15 -04:00
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-27 11:07:13 -05:00
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
Reference in New Issue Copy Permalink