android_kernel_xiaomi_sm8350/net/mac80211/ieee80211_ioctl.c

1134 lines
30 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <asm/uaccess.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "ieee80211_rate.h"
#include "wpa.h"
#include "aes_ccm.h"
static int ieee80211_set_encryption(struct net_device *dev, u8 *sta_addr,
int idx, int alg, int remove,
int set_tx_key, const u8 *_key,
size_t key_len)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int ret = 0;
struct sta_info *sta;
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 17:01:55 -04:00
struct ieee80211_key *key;
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (idx < 0 || idx >= NUM_DEFAULT_KEYS) {
printk(KERN_DEBUG "%s: set_encrypt - invalid idx=%d\n",
dev->name, idx);
return -EINVAL;
}
if (is_broadcast_ether_addr(sta_addr)) {
sta = NULL;
key = sdata->keys[idx];
} else {
set_tx_key = 0;
/*
* According to the standard, the key index of a pairwise
* key must be zero. However, some AP are broken when it
* comes to WEP key indices, so we work around this.
*/
if (idx != 0 && alg != ALG_WEP) {
printk(KERN_DEBUG "%s: set_encrypt - non-zero idx for "
"individual key\n", dev->name);
return -EINVAL;
}
sta = sta_info_get(local, sta_addr);
if (!sta) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
DECLARE_MAC_BUF(mac);
printk(KERN_DEBUG "%s: set_encrypt - unknown addr "
"%s\n",
dev->name, print_mac(mac, sta_addr));
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
return -ENOENT;
}
key = sta->key;
}
if (remove) {
ieee80211_key_free(key);
key = NULL;
} else {
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 17:01:55 -04:00
/*
[MAC80211]: fix race conditions with keys During receive processing, we select the key long before using it and because there's no locking it is possible that we kfree() the key after having selected it but before using it for crypto operations. Obviously, this is bad. Secondly, during transmit processing, there are two possible races: We have a similar race between select_key() and using it for encryption, but we also have a race here between select_key() and hardware encryption (both when a key is removed.) This patch solves these issues by using RCU: when a key is to be freed, we first remove the pointer from the appropriate places (sdata->keys, sdata->default_key, sta->key) using rcu_assign_pointer() and then synchronize_rcu(). Then, we can safely kfree() the key and remove it from the hardware. There's a window here where the hardware may still be using it for decryption, but we can't work around that without having two hardware callbacks, one to disable the key for RX and one to disable it for TX; but the worst thing that will happen is that we receive a packet decrypted that we don't find a key for any more and then drop it. When we add a key, we first need to upload it to the hardware and then, using rcu_assign_pointer() again, link it into our structures. In the code using keys (TX/RX paths) we use rcu_dereference() to get the key and enclose the whole tx/rx section in a rcu_read_lock() ... rcu_read_unlock() block. Because we've uploaded the key to hardware before linking it into internal structures, we can guarantee that it is valid once get to into tx(). One possible race condition remains, however: when we have hardware acceleration enabled and the driver shuts down the queues, we end up queueing the frame. If now somebody removes the key, the key will be removed from hwaccel and then then driver will be asked to encrypt the frame with a key index that has been removed. Hence, drivers will need to be aware that the hw_key_index they are passed might not be under all circumstances. Most drivers will, however, simply ignore that condition and encrypt the frame with the selected key anyway, this only results in a frame being encrypted with a wrong key or dropped (rightfully) because the key was not valid. There isn't much we can do about it unless we want to walk the pending frame queue every time a key is removed and remove all frames that used it. This race condition, however, will most likely be solved once we add multiqueue support to mac80211 because then frames will be queued further up the stack instead of after being processed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-14 11:10:24 -04:00
* Automatically frees any old key if present.
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 17:01:55 -04:00
*/
key = ieee80211_key_alloc(sdata, sta, alg, idx, key_len, _key);
if (!key) {
ret = -ENOMEM;
goto err_out;
}
}
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 17:01:55 -04:00
if (set_tx_key || (!sta && !sdata->default_key && key))
ieee80211_set_default_key(sdata, idx);
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 17:01:55 -04:00
ret = 0;
err_out:
if (sta)
sta_info_put(sta);
return ret;
}
static int ieee80211_ioctl_siwgenie(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->flags & IEEE80211_SDATA_USERSPACE_MLME)
return -EOPNOTSUPP;
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS) {
int ret = ieee80211_sta_set_extra_ie(dev, extra, data->length);
if (ret)
return ret;
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
ieee80211_sta_req_auth(dev, &sdata->u.sta);
return 0;
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_giwname(struct net_device *dev,
struct iw_request_info *info,
char *name, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
switch (local->hw.conf.phymode) {
case MODE_IEEE80211A:
strcpy(name, "IEEE 802.11a");
break;
case MODE_IEEE80211B:
strcpy(name, "IEEE 802.11b");
break;
case MODE_IEEE80211G:
strcpy(name, "IEEE 802.11g");
break;
default:
strcpy(name, "IEEE 802.11");
break;
}
return 0;
}
static int ieee80211_ioctl_giwrange(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct iw_range *range = (struct iw_range *) extra;
struct ieee80211_hw_mode *mode = NULL;
int c = 0;
data->length = sizeof(struct iw_range);
memset(range, 0, sizeof(struct iw_range));
range->we_version_compiled = WIRELESS_EXT;
range->we_version_source = 21;
range->retry_capa = IW_RETRY_LIMIT;
range->retry_flags = IW_RETRY_LIMIT;
range->min_retry = 0;
range->max_retry = 255;
range->min_rts = 0;
range->max_rts = 2347;
range->min_frag = 256;
range->max_frag = 2346;
range->encoding_size[0] = 5;
range->encoding_size[1] = 13;
range->num_encoding_sizes = 2;
range->max_encoding_tokens = NUM_DEFAULT_KEYS;
range->max_qual.qual = local->hw.max_signal;
range->max_qual.level = local->hw.max_rssi;
range->max_qual.noise = local->hw.max_noise;
range->max_qual.updated = local->wstats_flags;
range->avg_qual.qual = local->hw.max_signal/2;
range->avg_qual.level = 0;
range->avg_qual.noise = 0;
range->avg_qual.updated = local->wstats_flags;
range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
list_for_each_entry(mode, &local->modes_list, list) {
int i = 0;
if (!(local->enabled_modes & (1 << mode->mode)) ||
(local->hw_modes & local->enabled_modes &
(1 << MODE_IEEE80211G) && mode->mode == MODE_IEEE80211B))
continue;
while (i < mode->num_channels && c < IW_MAX_FREQUENCIES) {
struct ieee80211_channel *chan = &mode->channels[i];
if (chan->flag & IEEE80211_CHAN_W_SCAN) {
range->freq[c].i = chan->chan;
range->freq[c].m = chan->freq * 100000;
range->freq[c].e = 1;
c++;
}
i++;
}
}
range->num_channels = c;
range->num_frequency = c;
IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
return 0;
}
static int ieee80211_ioctl_siwmode(struct net_device *dev,
struct iw_request_info *info,
__u32 *mode, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int type;
if (sdata->type == IEEE80211_IF_TYPE_VLAN)
return -EOPNOTSUPP;
switch (*mode) {
case IW_MODE_INFRA:
type = IEEE80211_IF_TYPE_STA;
break;
case IW_MODE_ADHOC:
type = IEEE80211_IF_TYPE_IBSS;
break;
case IW_MODE_MONITOR:
type = IEEE80211_IF_TYPE_MNTR;
break;
default:
return -EINVAL;
}
if (type == sdata->type)
return 0;
if (netif_running(dev))
return -EBUSY;
ieee80211_if_reinit(dev);
ieee80211_if_set_type(dev, type);
return 0;
}
static int ieee80211_ioctl_giwmode(struct net_device *dev,
struct iw_request_info *info,
__u32 *mode, char *extra)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
switch (sdata->type) {
case IEEE80211_IF_TYPE_AP:
*mode = IW_MODE_MASTER;
break;
case IEEE80211_IF_TYPE_STA:
*mode = IW_MODE_INFRA;
break;
case IEEE80211_IF_TYPE_IBSS:
*mode = IW_MODE_ADHOC;
break;
case IEEE80211_IF_TYPE_MNTR:
*mode = IW_MODE_MONITOR;
break;
case IEEE80211_IF_TYPE_WDS:
*mode = IW_MODE_REPEAT;
break;
case IEEE80211_IF_TYPE_VLAN:
*mode = IW_MODE_SECOND; /* FIXME */
break;
default:
*mode = IW_MODE_AUTO;
break;
}
return 0;
}
int ieee80211_set_channel(struct ieee80211_local *local, int channel, int freq)
{
struct ieee80211_hw_mode *mode;
int c, set = 0;
int ret = -EINVAL;
list_for_each_entry(mode, &local->modes_list, list) {
if (!(local->enabled_modes & (1 << mode->mode)))
continue;
for (c = 0; c < mode->num_channels; c++) {
struct ieee80211_channel *chan = &mode->channels[c];
if (chan->flag & IEEE80211_CHAN_W_SCAN &&
((chan->chan == channel) || (chan->freq == freq))) {
local->oper_channel = chan;
local->oper_hw_mode = mode;
set = 1;
break;
}
}
if (set)
break;
}
if (set) {
if (local->sta_scanning)
ret = 0;
else
ret = ieee80211_hw_config(local);
rate_control_clear(local);
}
return ret;
}
static int ieee80211_ioctl_siwfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type == IEEE80211_IF_TYPE_STA)
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_CHANNEL_SEL;
/* freq->e == 0: freq->m = channel; otherwise freq = m * 10^e */
if (freq->e == 0) {
if (freq->m < 0) {
if (sdata->type == IEEE80211_IF_TYPE_STA)
sdata->u.sta.flags |=
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
return ieee80211_set_channel(local, freq->m, -1);
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
if (div > 0)
return ieee80211_set_channel(local, -1, freq->m / div);
else
return -EINVAL;
}
}
static int ieee80211_ioctl_giwfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
/* TODO: in station mode (Managed/Ad-hoc) might need to poll low-level
* driver for the current channel with firmware-based management */
freq->m = local->hw.conf.freq;
freq->e = 6;
return 0;
}
static int ieee80211_ioctl_siwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
struct ieee80211_sub_if_data *sdata;
size_t len = data->length;
/* iwconfig uses nul termination in SSID.. */
if (len > 0 && ssid[len - 1] == '\0')
len--;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS) {
int ret;
if (sdata->flags & IEEE80211_SDATA_USERSPACE_MLME) {
if (len > IEEE80211_MAX_SSID_LEN)
return -EINVAL;
memcpy(sdata->u.sta.ssid, ssid, len);
sdata->u.sta.ssid_len = len;
return 0;
}
if (data->flags)
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
else
sdata->u.sta.flags |= IEEE80211_STA_AUTO_SSID_SEL;
ret = ieee80211_sta_set_ssid(dev, ssid, len);
if (ret)
return ret;
ieee80211_sta_req_auth(dev, &sdata->u.sta);
return 0;
}
if (sdata->type == IEEE80211_IF_TYPE_AP) {
memcpy(sdata->u.ap.ssid, ssid, len);
memset(sdata->u.ap.ssid + len, 0,
IEEE80211_MAX_SSID_LEN - len);
sdata->u.ap.ssid_len = len;
return ieee80211_if_config(dev);
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_giwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
size_t len;
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS) {
int res = ieee80211_sta_get_ssid(dev, ssid, &len);
if (res == 0) {
data->length = len;
data->flags = 1;
} else
data->flags = 0;
return res;
}
if (sdata->type == IEEE80211_IF_TYPE_AP) {
len = sdata->u.ap.ssid_len;
if (len > IW_ESSID_MAX_SIZE)
len = IW_ESSID_MAX_SIZE;
memcpy(ssid, sdata->u.ap.ssid, len);
data->length = len;
data->flags = 1;
return 0;
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_siwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS) {
int ret;
if (sdata->flags & IEEE80211_SDATA_USERSPACE_MLME) {
memcpy(sdata->u.sta.bssid, (u8 *) &ap_addr->sa_data,
ETH_ALEN);
return 0;
}
if (is_zero_ether_addr((u8 *) &ap_addr->sa_data))
sdata->u.sta.flags |= IEEE80211_STA_AUTO_BSSID_SEL |
IEEE80211_STA_AUTO_CHANNEL_SEL;
else if (is_broadcast_ether_addr((u8 *) &ap_addr->sa_data))
sdata->u.sta.flags |= IEEE80211_STA_AUTO_BSSID_SEL;
else
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
ret = ieee80211_sta_set_bssid(dev, (u8 *) &ap_addr->sa_data);
if (ret)
return ret;
ieee80211_sta_req_auth(dev, &sdata->u.sta);
return 0;
} else if (sdata->type == IEEE80211_IF_TYPE_WDS) {
if (memcmp(sdata->u.wds.remote_addr, (u8 *) &ap_addr->sa_data,
ETH_ALEN) == 0)
return 0;
return ieee80211_if_update_wds(dev, (u8 *) &ap_addr->sa_data);
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_giwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
return 0;
} else if (sdata->type == IEEE80211_IF_TYPE_WDS) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
return 0;
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_siwscan(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct iw_scan_req *req = NULL;
u8 *ssid = NULL;
size_t ssid_len = 0;
if (!netif_running(dev))
return -ENETDOWN;
switch (sdata->type) {
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
if (local->scan_flags & IEEE80211_SCAN_MATCH_SSID) {
ssid = sdata->u.sta.ssid;
ssid_len = sdata->u.sta.ssid_len;
}
break;
case IEEE80211_IF_TYPE_AP:
if (local->scan_flags & IEEE80211_SCAN_MATCH_SSID) {
ssid = sdata->u.ap.ssid;
ssid_len = sdata->u.ap.ssid_len;
}
break;
default:
return -EOPNOTSUPP;
}
/* if SSID was specified explicitly then use that */
if (wrqu->data.length == sizeof(struct iw_scan_req) &&
wrqu->data.flags & IW_SCAN_THIS_ESSID) {
req = (struct iw_scan_req *)extra;
ssid = req->essid;
ssid_len = req->essid_len;
}
return ieee80211_sta_req_scan(dev, ssid, ssid_len);
}
static int ieee80211_ioctl_giwscan(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
int res;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (local->sta_scanning)
return -EAGAIN;
res = ieee80211_sta_scan_results(dev, extra, data->length);
if (res >= 0) {
data->length = res;
return 0;
}
data->length = 0;
return res;
}
static int ieee80211_ioctl_siwrate(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rate, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hw_mode *mode;
int i;
u32 target_rate = rate->value / 100000;
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (!sdata->bss)
return -ENODEV;
mode = local->oper_hw_mode;
/* target_rate = -1, rate->fixed = 0 means auto only, so use all rates
* target_rate = X, rate->fixed = 1 means only rate X
* target_rate = X, rate->fixed = 0 means all rates <= X */
sdata->bss->max_ratectrl_rateidx = -1;
sdata->bss->force_unicast_rateidx = -1;
if (rate->value < 0)
return 0;
for (i=0; i< mode->num_rates; i++) {
struct ieee80211_rate *rates = &mode->rates[i];
int this_rate = rates->rate;
if (target_rate == this_rate) {
sdata->bss->max_ratectrl_rateidx = i;
if (rate->fixed)
sdata->bss->force_unicast_rateidx = i;
break;
}
}
return 0;
}
static int ieee80211_ioctl_giwrate(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rate, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type == IEEE80211_IF_TYPE_STA)
sta = sta_info_get(local, sdata->u.sta.bssid);
else
return -EOPNOTSUPP;
if (!sta)
return -ENODEV;
if (sta->txrate < local->oper_hw_mode->num_rates)
rate->value = local->oper_hw_mode->rates[sta->txrate].rate * 100000;
else
rate->value = 0;
sta_info_put(sta);
return 0;
}
static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *data, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
bool need_reconfig = 0;
if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
return -EINVAL;
if (data->txpower.flags & IW_TXPOW_RANGE)
return -EINVAL;
if (!data->txpower.fixed)
return -EINVAL;
if (local->hw.conf.power_level != data->txpower.value) {
local->hw.conf.power_level = data->txpower.value;
need_reconfig = 1;
}
if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
local->hw.conf.radio_enabled = !(data->txpower.disabled);
need_reconfig = 1;
}
if (need_reconfig) {
ieee80211_hw_config(local);
/* The return value of hw_config is not of big interest here,
* as it doesn't say that it failed because of _this_ config
* change or something else. Ignore it. */
}
return 0;
}
static int ieee80211_ioctl_giwtxpower(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *data, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
data->txpower.fixed = 1;
data->txpower.disabled = !(local->hw.conf.radio_enabled);
data->txpower.value = local->hw.conf.power_level;
data->txpower.flags = IW_TXPOW_DBM;
return 0;
}
static int ieee80211_ioctl_siwrts(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rts, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (rts->disabled)
local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
else if (rts->value < 0 || rts->value > IEEE80211_MAX_RTS_THRESHOLD)
return -EINVAL;
else
local->rts_threshold = rts->value;
/* If the wlan card performs RTS/CTS in hardware/firmware,
* configure it here */
if (local->ops->set_rts_threshold)
local->ops->set_rts_threshold(local_to_hw(local),
local->rts_threshold);
return 0;
}
static int ieee80211_ioctl_giwrts(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rts, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
rts->value = local->rts_threshold;
rts->disabled = (rts->value >= IEEE80211_MAX_RTS_THRESHOLD);
rts->fixed = 1;
return 0;
}
static int ieee80211_ioctl_siwfrag(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *frag, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (frag->disabled)
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
else if (frag->value < 256 ||
frag->value > IEEE80211_MAX_FRAG_THRESHOLD)
return -EINVAL;
else {
/* Fragment length must be even, so strip LSB. */
local->fragmentation_threshold = frag->value & ~0x1;
}
/* If the wlan card performs fragmentation in hardware/firmware,
* configure it here */
if (local->ops->set_frag_threshold)
local->ops->set_frag_threshold(
local_to_hw(local),
local->fragmentation_threshold);
return 0;
}
static int ieee80211_ioctl_giwfrag(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *frag, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
frag->value = local->fragmentation_threshold;
frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD);
frag->fixed = 1;
return 0;
}
static int ieee80211_ioctl_siwretry(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *retry, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (retry->disabled ||
(retry->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT)
return -EINVAL;
if (retry->flags & IW_RETRY_MAX)
local->long_retry_limit = retry->value;
else if (retry->flags & IW_RETRY_MIN)
local->short_retry_limit = retry->value;
else {
local->long_retry_limit = retry->value;
local->short_retry_limit = retry->value;
}
if (local->ops->set_retry_limit) {
return local->ops->set_retry_limit(
local_to_hw(local),
local->short_retry_limit,
local->long_retry_limit);
}
return 0;
}
static int ieee80211_ioctl_giwretry(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *retry, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
retry->disabled = 0;
if (retry->flags == 0 || retry->flags & IW_RETRY_MIN) {
/* first return min value, iwconfig will ask max value
* later if needed */
retry->flags |= IW_RETRY_LIMIT;
retry->value = local->short_retry_limit;
if (local->long_retry_limit != local->short_retry_limit)
retry->flags |= IW_RETRY_MIN;
return 0;
}
if (retry->flags & IW_RETRY_MAX) {
retry->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
retry->value = local->long_retry_limit;
}
return 0;
}
static int ieee80211_ioctl_siwmlme(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct ieee80211_sub_if_data *sdata;
struct iw_mlme *mlme = (struct iw_mlme *) extra;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type != IEEE80211_IF_TYPE_STA &&
sdata->type != IEEE80211_IF_TYPE_IBSS)
return -EINVAL;
switch (mlme->cmd) {
case IW_MLME_DEAUTH:
/* TODO: mlme->addr.sa_data */
return ieee80211_sta_deauthenticate(dev, mlme->reason_code);
case IW_MLME_DISASSOC:
/* TODO: mlme->addr.sa_data */
return ieee80211_sta_disassociate(dev, mlme->reason_code);
default:
return -EOPNOTSUPP;
}
}
static int ieee80211_ioctl_siwencode(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *erq, char *keybuf)
{
struct ieee80211_sub_if_data *sdata;
int idx, i, alg = ALG_WEP;
u8 bcaddr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
int remove = 0;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
idx = erq->flags & IW_ENCODE_INDEX;
if (idx == 0) {
if (sdata->default_key)
for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
if (sdata->default_key == sdata->keys[i]) {
idx = i;
break;
}
}
} else if (idx < 1 || idx > 4)
return -EINVAL;
else
idx--;
if (erq->flags & IW_ENCODE_DISABLED)
remove = 1;
else if (erq->length == 0) {
/* No key data - just set the default TX key index */
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 17:01:55 -04:00
ieee80211_set_default_key(sdata, idx);
return 0;
}
return ieee80211_set_encryption(
dev, bcaddr,
idx, alg, remove,
!sdata->default_key,
keybuf, erq->length);
}
static int ieee80211_ioctl_giwencode(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *erq, char *key)
{
struct ieee80211_sub_if_data *sdata;
int idx, i;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
idx = erq->flags & IW_ENCODE_INDEX;
if (idx < 1 || idx > 4) {
idx = -1;
if (!sdata->default_key)
idx = 0;
else for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
if (sdata->default_key == sdata->keys[i]) {
idx = i;
break;
}
}
if (idx < 0)
return -EINVAL;
} else
idx--;
erq->flags = idx + 1;
if (!sdata->keys[idx]) {
erq->length = 0;
erq->flags |= IW_ENCODE_DISABLED;
return 0;
}
memcpy(key, sdata->keys[idx]->conf.key,
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 17:01:55 -04:00
min_t(int, erq->length, sdata->keys[idx]->conf.keylen));
erq->length = sdata->keys[idx]->conf.keylen;
erq->flags |= IW_ENCODE_ENABLED;
return 0;
}
static int ieee80211_ioctl_siwauth(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *data, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int ret = 0;
switch (data->flags & IW_AUTH_INDEX) {
case IW_AUTH_WPA_VERSION:
case IW_AUTH_CIPHER_PAIRWISE:
case IW_AUTH_CIPHER_GROUP:
case IW_AUTH_WPA_ENABLED:
case IW_AUTH_RX_UNENCRYPTED_EAPOL:
break;
case IW_AUTH_KEY_MGMT:
if (sdata->type != IEEE80211_IF_TYPE_STA)
ret = -EINVAL;
else {
/*
* Key management was set by wpa_supplicant,
* we only need this to associate to a network
* that has privacy enabled regardless of not
* having a key.
*/
sdata->u.sta.key_management_enabled = !!data->value;
}
break;
case IW_AUTH_80211_AUTH_ALG:
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS)
sdata->u.sta.auth_algs = data->value;
else
ret = -EOPNOTSUPP;
break;
case IW_AUTH_PRIVACY_INVOKED:
if (local->ops->set_privacy_invoked)
ret = local->ops->set_privacy_invoked(
local_to_hw(local), data->value);
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
/* Get wireless statistics. Called by /proc/net/wireless and by SIOCGIWSTATS */
static struct iw_statistics *ieee80211_get_wireless_stats(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct iw_statistics *wstats = &local->wstats;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta = NULL;
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS)
sta = sta_info_get(local, sdata->u.sta.bssid);
if (!sta) {
wstats->discard.fragment = 0;
wstats->discard.misc = 0;
wstats->qual.qual = 0;
wstats->qual.level = 0;
wstats->qual.noise = 0;
wstats->qual.updated = IW_QUAL_ALL_INVALID;
} else {
wstats->qual.level = sta->last_rssi;
wstats->qual.qual = sta->last_signal;
wstats->qual.noise = sta->last_noise;
wstats->qual.updated = local->wstats_flags;
sta_info_put(sta);
}
return wstats;
}
static int ieee80211_ioctl_giwauth(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *data, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int ret = 0;
switch (data->flags & IW_AUTH_INDEX) {
case IW_AUTH_80211_AUTH_ALG:
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS)
data->value = sdata->u.sta.auth_algs;
else
ret = -EOPNOTSUPP;
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
static int ieee80211_ioctl_siwencodeext(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *erq, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
int uninitialized_var(alg), idx, i, remove = 0;
switch (ext->alg) {
case IW_ENCODE_ALG_NONE:
remove = 1;
break;
case IW_ENCODE_ALG_WEP:
alg = ALG_WEP;
break;
case IW_ENCODE_ALG_TKIP:
alg = ALG_TKIP;
break;
case IW_ENCODE_ALG_CCMP:
alg = ALG_CCMP;
break;
default:
return -EOPNOTSUPP;
}
if (erq->flags & IW_ENCODE_DISABLED)
remove = 1;
idx = erq->flags & IW_ENCODE_INDEX;
if (idx < 1 || idx > 4) {
idx = -1;
if (!sdata->default_key)
idx = 0;
else for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
if (sdata->default_key == sdata->keys[i]) {
idx = i;
break;
}
}
if (idx < 0)
return -EINVAL;
} else
idx--;
return ieee80211_set_encryption(dev, ext->addr.sa_data, idx, alg,
remove,
ext->ext_flags &
IW_ENCODE_EXT_SET_TX_KEY,
ext->key, ext->key_len);
}
/* Structures to export the Wireless Handlers */
static const iw_handler ieee80211_handler[] =
{
(iw_handler) NULL, /* SIOCSIWCOMMIT */
(iw_handler) ieee80211_ioctl_giwname, /* SIOCGIWNAME */
(iw_handler) NULL, /* SIOCSIWNWID */
(iw_handler) NULL, /* SIOCGIWNWID */
(iw_handler) ieee80211_ioctl_siwfreq, /* SIOCSIWFREQ */
(iw_handler) ieee80211_ioctl_giwfreq, /* SIOCGIWFREQ */
(iw_handler) ieee80211_ioctl_siwmode, /* SIOCSIWMODE */
(iw_handler) ieee80211_ioctl_giwmode, /* SIOCGIWMODE */
(iw_handler) NULL, /* SIOCSIWSENS */
(iw_handler) NULL, /* SIOCGIWSENS */
(iw_handler) NULL /* not used */, /* SIOCSIWRANGE */
(iw_handler) ieee80211_ioctl_giwrange, /* SIOCGIWRANGE */
(iw_handler) NULL /* not used */, /* SIOCSIWPRIV */
(iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */
(iw_handler) NULL /* not used */, /* SIOCSIWSTATS */
(iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */
(iw_handler) NULL, /* SIOCSIWSPY */
(iw_handler) NULL, /* SIOCGIWSPY */
(iw_handler) NULL, /* SIOCSIWTHRSPY */
(iw_handler) NULL, /* SIOCGIWTHRSPY */
(iw_handler) ieee80211_ioctl_siwap, /* SIOCSIWAP */
(iw_handler) ieee80211_ioctl_giwap, /* SIOCGIWAP */
(iw_handler) ieee80211_ioctl_siwmlme, /* SIOCSIWMLME */
(iw_handler) NULL, /* SIOCGIWAPLIST */
(iw_handler) ieee80211_ioctl_siwscan, /* SIOCSIWSCAN */
(iw_handler) ieee80211_ioctl_giwscan, /* SIOCGIWSCAN */
(iw_handler) ieee80211_ioctl_siwessid, /* SIOCSIWESSID */
(iw_handler) ieee80211_ioctl_giwessid, /* SIOCGIWESSID */
(iw_handler) NULL, /* SIOCSIWNICKN */
(iw_handler) NULL, /* SIOCGIWNICKN */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) ieee80211_ioctl_siwrate, /* SIOCSIWRATE */
(iw_handler) ieee80211_ioctl_giwrate, /* SIOCGIWRATE */
(iw_handler) ieee80211_ioctl_siwrts, /* SIOCSIWRTS */
(iw_handler) ieee80211_ioctl_giwrts, /* SIOCGIWRTS */
(iw_handler) ieee80211_ioctl_siwfrag, /* SIOCSIWFRAG */
(iw_handler) ieee80211_ioctl_giwfrag, /* SIOCGIWFRAG */
(iw_handler) ieee80211_ioctl_siwtxpower, /* SIOCSIWTXPOW */
(iw_handler) ieee80211_ioctl_giwtxpower, /* SIOCGIWTXPOW */
(iw_handler) ieee80211_ioctl_siwretry, /* SIOCSIWRETRY */
(iw_handler) ieee80211_ioctl_giwretry, /* SIOCGIWRETRY */
(iw_handler) ieee80211_ioctl_siwencode, /* SIOCSIWENCODE */
(iw_handler) ieee80211_ioctl_giwencode, /* SIOCGIWENCODE */
(iw_handler) NULL, /* SIOCSIWPOWER */
(iw_handler) NULL, /* SIOCGIWPOWER */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) ieee80211_ioctl_siwgenie, /* SIOCSIWGENIE */
(iw_handler) NULL, /* SIOCGIWGENIE */
(iw_handler) ieee80211_ioctl_siwauth, /* SIOCSIWAUTH */
(iw_handler) ieee80211_ioctl_giwauth, /* SIOCGIWAUTH */
(iw_handler) ieee80211_ioctl_siwencodeext, /* SIOCSIWENCODEEXT */
(iw_handler) NULL, /* SIOCGIWENCODEEXT */
(iw_handler) NULL, /* SIOCSIWPMKSA */
(iw_handler) NULL, /* -- hole -- */
};
const struct iw_handler_def ieee80211_iw_handler_def =
{
.num_standard = ARRAY_SIZE(ieee80211_handler),
.standard = (iw_handler *) ieee80211_handler,
.get_wireless_stats = ieee80211_get_wireless_stats,
};