[ARM] 3369/1: ep93xx: add core cirrus ep93xx support
Patch from Lennert Buytenhek
This patch adds support for the Cirrus ep93xx series of CPUs. The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.
This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 12:10:13 -05:00
|
|
|
/*
|
2008-08-05 11:14:15 -04:00
|
|
|
* arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
|
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support
Patch from Lennert Buytenhek
This patch adds support for the Cirrus ep93xx series of CPUs. The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.
This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 12:10:13 -05:00
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __ASM_ARCH_EP93XX_REGS_H
|
|
|
|
#define __ASM_ARCH_EP93XX_REGS_H
|
|
|
|
|
2008-10-06 17:43:02 -04:00
|
|
|
/*
|
|
|
|
* EP93xx Physical Memory Map:
|
|
|
|
*
|
|
|
|
* The ASDO pin is sampled at system reset to select a synchronous or
|
|
|
|
* asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
|
|
|
|
* the synchronous boot mode is selected. When ASDO is "0" (i.e
|
|
|
|
* pulled-down) the asynchronous boot mode is selected.
|
|
|
|
*
|
|
|
|
* In synchronous boot mode nSDCE3 is decoded starting at physical address
|
|
|
|
* 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
|
|
|
|
* boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
|
|
|
|
* decoded at 0xf0000000.
|
|
|
|
*
|
|
|
|
* There is known errata for the EP93xx dealing with External Memory
|
|
|
|
* Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
|
|
|
|
* Guidelines" for more information. This document can be found at:
|
|
|
|
*
|
|
|
|
* http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
|
|
|
|
#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
|
|
|
|
#define EP93XX_CS1_PHYS_BASE 0x10000000
|
|
|
|
#define EP93XX_CS2_PHYS_BASE 0x20000000
|
|
|
|
#define EP93XX_CS3_PHYS_BASE 0x30000000
|
|
|
|
#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
|
|
|
|
#define EP93XX_CS6_PHYS_BASE 0x60000000
|
|
|
|
#define EP93XX_CS7_PHYS_BASE 0x70000000
|
|
|
|
#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
|
|
|
|
#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
|
|
|
|
#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
|
|
|
|
#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
|
|
|
|
#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
|
|
|
|
|
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support
Patch from Lennert Buytenhek
This patch adds support for the Cirrus ep93xx series of CPUs. The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.
This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 12:10:13 -05:00
|
|
|
/*
|
|
|
|
* EP93xx linux memory map:
|
|
|
|
*
|
|
|
|
* virt phys size
|
|
|
|
* fe800000 5M per-platform mappings
|
|
|
|
* fed00000 80800000 2M APB
|
|
|
|
* fef00000 80000000 1M AHB
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define EP93XX_AHB_PHYS_BASE 0x80000000
|
|
|
|
#define EP93XX_AHB_VIRT_BASE 0xfef00000
|
|
|
|
#define EP93XX_AHB_SIZE 0x00100000
|
|
|
|
|
|
|
|
#define EP93XX_APB_PHYS_BASE 0x80800000
|
|
|
|
#define EP93XX_APB_VIRT_BASE 0xfed00000
|
|
|
|
#define EP93XX_APB_SIZE 0x00200000
|
|
|
|
|
|
|
|
|
|
|
|
/* AHB peripherals */
|
|
|
|
#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
|
|
|
|
|
|
|
|
#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
|
2006-09-21 20:28:13 -04:00
|
|
|
#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
|
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support
Patch from Lennert Buytenhek
This patch adds support for the Cirrus ep93xx series of CPUs. The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.
This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 12:10:13 -05:00
|
|
|
|
|
|
|
#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
|
|
|
|
#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
|
|
|
|
|
|
|
|
#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
|
|
|
|
|
|
|
|
#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
|
|
|
|
|
|
|
|
#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
|
|
|
|
|
|
|
|
#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
|
|
|
|
|
|
|
|
#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
|
|
|
|
|
|
|
|
#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
|
|
|
|
|
|
|
|
#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
|
|
|
|
|
|
|
|
#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
|
|
|
|
|
|
|
|
|
|
|
|
/* APB peripherals */
|
|
|
|
#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
|
|
|
|
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
|
|
|
|
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
|
|
|
|
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
|
|
|
|
#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
|
|
|
|
#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
|
|
|
|
#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
|
|
|
|
#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
|
|
|
|
#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
|
|
|
|
#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
|
|
|
|
#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
|
|
|
|
#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
|
|
|
|
#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
|
|
|
|
#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
|
|
|
|
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
|
|
|
|
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
|
|
|
|
|
|
|
|
#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
|
|
|
|
|
|
|
|
#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
|
|
|
|
|
|
|
|
#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
|
2006-03-20 12:10:14 -05:00
|
|
|
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
|
2007-02-04 18:38:48 -05:00
|
|
|
#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
|
|
|
|
#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
|
|
|
|
#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
|
|
|
|
#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
|
|
|
|
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
|
2006-03-20 16:02:37 -05:00
|
|
|
#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
|
|
|
|
#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
|
|
|
|
#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
|
|
|
|
#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
|
|
|
|
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
|
|
|
|
#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
|
|
|
|
#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
|
|
|
|
#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
|
|
|
|
#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
|
|
|
|
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
|
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support
Patch from Lennert Buytenhek
This patch adds support for the Cirrus ep93xx series of CPUs. The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.
This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 12:10:13 -05:00
|
|
|
|
|
|
|
#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
|
|
|
|
|
|
|
|
#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
|
|
|
|
|
|
|
|
#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
|
|
|
|
|
|
|
|
#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
|
|
|
|
#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
|
|
|
|
|
|
|
|
#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
|
|
|
|
#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
|
|
|
|
|
|
|
|
#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
|
|
|
|
#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
|
|
|
|
|
|
|
|
#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
|
|
|
|
|
|
|
|
#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
|
|
|
|
#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
|
|
|
|
|
|
|
|
#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
|
|
|
|
|
|
|
|
#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
|
|
|
|
|
|
|
|
#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
|
|
|
|
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
|
|
|
|
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
|
|
|
|
#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
|
|
|
|
#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
|
|
|
|
#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
|
|
|
|
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
|
|
|
|
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
|
2006-06-24 05:33:02 -04:00
|
|
|
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
|
|
|
|
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
|
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support
Patch from Lennert Buytenhek
This patch adds support for the Cirrus ep93xx series of CPUs. The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.
This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 12:10:13 -05:00
|
|
|
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
|
|
|
|
#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
|
|
|
|
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
|
|
|
|
|
|
|
|
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
|
|
|
|
|
|
|
|
|
|
|
|
#endif
|