android_kernel_xiaomi_sm8350/kernel/trace/trace_boot.c

187 lines
4.0 KiB
C
Raw Normal View History

/*
* ring buffer based initcalls tracer
*
* Copyright (C) 2008 Frederic Weisbecker <fweisbec@gmail.com>
*
*/
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/ftrace.h>
#include <linux/kallsyms.h>
#include "trace.h"
static struct trace_array *boot_trace;
static bool pre_initcalls_finished;
/* Tells the boot tracer that the pre_smp_initcalls are finished.
* So we are ready .
* It doesn't enable sched events tracing however.
* You have to call enable_boot_trace to do so.
*/
void start_boot_trace(void)
{
pre_initcalls_finished = true;
}
void enable_boot_trace(void)
{
if (pre_initcalls_finished)
tracing_start_sched_switch_record();
}
void disable_boot_trace(void)
{
if (pre_initcalls_finished)
tracing_stop_sched_switch_record();
}
static int boot_trace_init(struct trace_array *tr)
{
int cpu;
boot_trace = tr;
for_each_cpu(cpu, cpu_possible_mask)
tracing_reset(tr, cpu);
tracing_sched_switch_assign_trace(tr);
return 0;
}
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
static enum print_line_t
initcall_call_print_line(struct trace_iterator *iter)
{
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
struct trace_entry *entry = iter->ent;
struct trace_seq *s = &iter->seq;
struct trace_boot_call *field;
struct boot_trace_call *call;
u64 ts;
unsigned long nsec_rem;
int ret;
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
trace_assign_type(field, entry);
call = &field->boot_call;
ts = iter->ts;
nsec_rem = do_div(ts, 1000000000);
ret = trace_seq_printf(s, "[%5ld.%09ld] calling %s @ %i\n",
(unsigned long)ts, nsec_rem, call->func, call->caller);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
else
return TRACE_TYPE_HANDLED;
}
static enum print_line_t
initcall_ret_print_line(struct trace_iterator *iter)
{
struct trace_entry *entry = iter->ent;
struct trace_seq *s = &iter->seq;
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
struct trace_boot_ret *field;
struct boot_trace_ret *init_ret;
u64 ts;
unsigned long nsec_rem;
int ret;
trace_assign_type(field, entry);
init_ret = &field->boot_ret;
ts = iter->ts;
nsec_rem = do_div(ts, 1000000000);
ret = trace_seq_printf(s, "[%5ld.%09ld] initcall %s "
"returned %d after %llu msecs\n",
(unsigned long) ts,
nsec_rem,
init_ret->func, init_ret->result, init_ret->duration);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
else
return TRACE_TYPE_HANDLED;
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
}
static enum print_line_t initcall_print_line(struct trace_iterator *iter)
{
struct trace_entry *entry = iter->ent;
switch (entry->type) {
case TRACE_BOOT_CALL:
return initcall_call_print_line(iter);
case TRACE_BOOT_RET:
return initcall_ret_print_line(iter);
default:
return TRACE_TYPE_UNHANDLED;
}
}
struct tracer boot_tracer __read_mostly =
{
.name = "initcall",
.init = boot_trace_init,
.reset = tracing_reset_online_cpus,
.print_line = initcall_print_line,
};
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
void trace_boot_call(struct boot_trace_call *bt, initcall_t fn)
{
struct ring_buffer_event *event;
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
struct trace_boot_call *entry;
unsigned long irq_flags;
struct trace_array *tr = boot_trace;
if (!pre_initcalls_finished)
return;
/* Get its name now since this function could
* disappear because it is in the .init section.
*/
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
sprint_symbol(bt->func, (unsigned long)fn);
preempt_disable();
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
if (!event)
goto out;
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, 0);
entry->ent.type = TRACE_BOOT_CALL;
entry->boot_call = *bt;
ring_buffer_unlock_commit(tr->buffer, event, irq_flags);
trace_wake_up();
out:
preempt_enable();
}
void trace_boot_ret(struct boot_trace_ret *bt, initcall_t fn)
{
struct ring_buffer_event *event;
struct trace_boot_ret *entry;
unsigned long irq_flags;
struct trace_array *tr = boot_trace;
if (!pre_initcalls_finished)
return;
sprint_symbol(bt->func, (unsigned long)fn);
preempt_disable();
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
if (!event)
goto out;
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, 0);
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 17:24:42 -05:00
entry->ent.type = TRACE_BOOT_RET;
entry->boot_ret = *bt;
ring_buffer_unlock_commit(tr->buffer, event, irq_flags);
trace_wake_up();
out:
preempt_enable();
}