2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168).
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* Copyright (C) 2002, 2005 - 2008 by Andreas Mohr <andi AT lisas.de>
|
2005-04-16 18:20:36 -04:00
|
|
|
*
|
|
|
|
* Framework borrowed from Bart Hartgers's als4000.c.
|
|
|
|
* Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801),
|
|
|
|
* found in a Fujitsu-Siemens PC ("Cordant", aluminum case).
|
|
|
|
* Other versions are:
|
|
|
|
* PCI168 A(W), sub ID 1800
|
|
|
|
* PCI168 A/AP, sub ID 8000
|
|
|
|
* Please give me feedback in case you try my driver with one of these!!
|
|
|
|
*
|
|
|
|
* GPL LICENSE
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*
|
|
|
|
* NOTES
|
|
|
|
* Since Aztech does not provide any chipset documentation,
|
|
|
|
* even on repeated request to various addresses,
|
|
|
|
* and the answer that was finally given was negative
|
|
|
|
* (and I was stupid enough to manage to get hold of a PCI168 soundcard
|
|
|
|
* in the first place >:-P}),
|
|
|
|
* I was forced to base this driver on reverse engineering
|
|
|
|
* (3 weeks' worth of evenings filled with driver work).
|
2006-05-17 05:04:19 -04:00
|
|
|
* (and no, I did NOT go the easy way: to pick up a SB PCI128 for 9 Euros)
|
2005-04-16 18:20:36 -04:00
|
|
|
*
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* It is quite likely that the AZF3328 chip is the PCI cousin of the
|
|
|
|
* AZF3318 ("azt1020 pnp", "MM Pro 16") ISA chip, given very similar specs.
|
|
|
|
*
|
2005-04-16 18:20:36 -04:00
|
|
|
* The AZF3328 chip (note: AZF3328, *not* AZT3328, that's just the driver name
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* for compatibility reasons) from Azfin (joint-venture of Aztech and Fincitec,
|
|
|
|
* Fincitec acquired by National Semiconductor in 2002, together with the
|
|
|
|
* Fincitec-related company ARSmikro) has the following features:
|
2005-04-16 18:20:36 -04:00
|
|
|
*
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - compatibility & compliance:
|
|
|
|
* - Microsoft PC 97 ("PC 97 Hardware Design Guide",
|
|
|
|
* http://www.microsoft.com/whdc/archive/pcguides.mspx)
|
|
|
|
* - Microsoft PC 98 Baseline Audio
|
|
|
|
* - MPU401 UART
|
|
|
|
* - Sound Blaster Emulation (DOS Box)
|
2005-04-16 18:20:36 -04:00
|
|
|
* - builtin AC97 conformant codec (SNR over 80dB)
|
2006-05-17 05:03:16 -04:00
|
|
|
* Note that "conformant" != "compliant"!! this chip's mixer register layout
|
|
|
|
* *differs* from the standard AC97 layout:
|
|
|
|
* they chose to not implement the headphone register (which is not a
|
|
|
|
* problem since it's merely optional), yet when doing this, they committed
|
|
|
|
* the grave sin of letting other registers follow immediately instead of
|
|
|
|
* keeping a headphone dummy register, thereby shifting the mixer register
|
|
|
|
* addresses illegally. So far unfortunately it looks like the very flexible
|
|
|
|
* ALSA AC97 support is still not enough to easily compensate for such a
|
|
|
|
* grave layout violation despite all tweaks and quirks mechanisms it offers.
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - builtin genuine OPL3 - verified to work fine, 20080506
|
2005-04-16 18:20:36 -04:00
|
|
|
* - full duplex 16bit playback/record at independent sampling rate
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - MPU401 (+ legacy address support, claimed by one official spec sheet)
|
|
|
|
* FIXME: how to enable legacy addr??
|
2005-04-16 18:20:36 -04:00
|
|
|
* - game port (legacy address support)
|
2007-03-26 06:49:45 -04:00
|
|
|
* - builtin DirectInput support, helps reduce CPU overhead (interrupt-driven
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* features supported). - See common term "Digital Enhanced Game Port"...
|
|
|
|
* (probably DirectInput 3.0 spec - confirm)
|
|
|
|
* - builtin 3D enhancement (said to be YAMAHA Ymersion)
|
2005-04-16 18:20:36 -04:00
|
|
|
* - built-in General DirectX timer having a 20 bits counter
|
2005-10-25 05:17:45 -04:00
|
|
|
* with 1us resolution (see below!)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - I2S serial output port for external DAC
|
2005-04-16 18:20:36 -04:00
|
|
|
* - supports 33MHz PCI spec 2.1, PCI power management 1.0, compliant with ACPI
|
|
|
|
* - supports hardware volume control
|
|
|
|
* - single chip low cost solution (128 pin QFP)
|
|
|
|
* - supports programmable Sub-vendor and Sub-system ID
|
|
|
|
* required for Microsoft's logo compliance (FIXME: where?)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* At least the Trident 4D Wave DX has one bit somewhere
|
|
|
|
* to enable writes to PCI subsystem VID registers, that should be it.
|
|
|
|
* This might easily be in extended PCI reg space, since PCI168 also has
|
|
|
|
* some custom data starting at 0x80. What kind of config settings
|
|
|
|
* are located in our extended PCI space anyway??
|
2005-04-16 18:20:36 -04:00
|
|
|
* - PCI168 AP(W) card: power amplifier with 4 Watts/channel at 4 Ohms
|
|
|
|
*
|
2005-10-25 05:17:45 -04:00
|
|
|
* Note that this driver now is actually *better* than the Windows driver,
|
|
|
|
* since it additionally supports the card's 1MHz DirectX timer - just try
|
|
|
|
* the following snd-seq module parameters etc.:
|
|
|
|
* - options snd-seq seq_default_timer_class=2 seq_default_timer_sclass=0
|
|
|
|
* seq_default_timer_card=0 seq_client_load=1 seq_default_timer_device=0
|
|
|
|
* seq_default_timer_subdevice=0 seq_default_timer_resolution=1000000
|
|
|
|
* - "timidity -iAv -B2,8 -Os -EFreverb=0"
|
|
|
|
* - "pmidi -p 128:0 jazz.mid"
|
|
|
|
*
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* OPL3 hardware playback testing, try something like:
|
|
|
|
* cat /proc/asound/hwdep
|
|
|
|
* and
|
|
|
|
* aconnect -o
|
|
|
|
* Then use
|
|
|
|
* sbiload -Dhw:x,y --opl3 /usr/share/sounds/opl3/std.o3 ......./drums.o3
|
|
|
|
* where x,y is the xx-yy number as given in hwdep.
|
|
|
|
* Then try
|
|
|
|
* pmidi -p a:b jazz.mid
|
|
|
|
* where a:b is the client number plus 0 usually, as given by aconnect above.
|
|
|
|
* Oh, and make sure to unmute the FM mixer control (doh!)
|
|
|
|
* NOTE: power use during OPL3 playback is _VERY_ high (70W --> 90W!)
|
|
|
|
* despite no CPU activity, possibly due to hindering ACPI idling somehow.
|
|
|
|
* Shouldn't be a problem of the AZF3328 chip itself, I'd hope.
|
|
|
|
* Higher PCM / FM mixer levels seem to conflict (causes crackling),
|
|
|
|
* at least sometimes. Maybe even use with hardware sequencer timer above :)
|
|
|
|
* adplay/adplug-utils might soon offer hardware-based OPL3 playback, too.
|
|
|
|
*
|
2005-04-16 18:20:36 -04:00
|
|
|
* Certain PCI versions of this card are susceptible to DMA traffic underruns
|
|
|
|
* in some systems (resulting in sound crackling/clicking/popping),
|
|
|
|
* probably because they don't have a DMA FIFO buffer or so.
|
|
|
|
* Overview (PCI ID/PCI subID/PCI rev.):
|
|
|
|
* - no DMA crackling on SiS735: 0x50DC/0x1801/16
|
|
|
|
* - unknown performance: 0x50DC/0x1801/10
|
2005-10-25 05:17:45 -04:00
|
|
|
* (well, it's not bad on an Athlon 1800 with now very optimized IRQ handler)
|
|
|
|
*
|
2005-04-16 18:20:36 -04:00
|
|
|
* Crackling happens with VIA chipsets or, in my case, an SiS735, which is
|
|
|
|
* supposed to be very fast and supposed to get rid of crackling much
|
|
|
|
* better than a VIA, yet ironically I still get crackling, like many other
|
|
|
|
* people with the same chipset.
|
|
|
|
* Possible remedies:
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - use speaker (amplifier) output instead of headphone output
|
|
|
|
* (in case crackling is due to overloaded output clipping)
|
2005-04-16 18:20:36 -04:00
|
|
|
* - plug card into a different PCI slot, preferrably one that isn't shared
|
|
|
|
* too much (this helps a lot, but not completely!)
|
|
|
|
* - get rid of PCI VGA card, use AGP instead
|
|
|
|
* - upgrade or downgrade BIOS
|
|
|
|
* - fiddle with PCI latency settings (setpci -v -s BUSID latency_timer=XX)
|
|
|
|
* Not too helpful.
|
|
|
|
* - Disable ACPI/power management/"Auto Detect RAM/PCI Clk" in BIOS
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
*
|
2005-04-16 18:20:36 -04:00
|
|
|
* BUGS
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - full-duplex might *still* be problematic, however a recent test was fine
|
2007-03-26 06:49:45 -04:00
|
|
|
* - (non-bug) "Bass/Treble or 3D settings don't work" - they do get evaluated
|
|
|
|
* if you set PCM output switch to "pre 3D" instead of "post 3D".
|
|
|
|
* If this can't be set, then get a mixer application that Isn't Stupid (tm)
|
|
|
|
* (e.g. kmix, gamix) - unfortunately several are!!
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - locking is not entirely clean, especially the audio stream activity
|
|
|
|
* ints --> may be racy
|
|
|
|
* - an _unconnected_ secondary joystick at the gameport will be reported
|
|
|
|
* to be "active" (floating values, not precisely -1) due to the way we need
|
|
|
|
* to read the Digital Enhanced Game Port. Not sure whether it is fixable.
|
|
|
|
*
|
2005-04-16 18:20:36 -04:00
|
|
|
* TODO
|
|
|
|
* - test MPU401 MIDI playback etc.
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - add more power micro-management (disable various units of the card
|
|
|
|
* as long as they're unused). However this requires more I/O ports which I
|
2006-05-17 05:02:24 -04:00
|
|
|
* haven't figured out yet and which thus might not even exist...
|
|
|
|
* The standard suspend/resume functionality could probably make use of
|
|
|
|
* some improvement, too...
|
2005-04-16 18:20:36 -04:00
|
|
|
* - figure out what all unknown port bits are responsible for
|
2006-05-17 05:03:16 -04:00
|
|
|
* - figure out some cleverly evil scheme to possibly make ALSA AC97 code
|
|
|
|
* fully accept our quite incompatible ""AC97"" mixer and thus save some
|
|
|
|
* code (but I'm not too optimistic that doing this is possible at all)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
* - use MMIO (memory-mapped I/O)? Slightly faster access, e.g. for gameport.
|
2005-04-16 18:20:36 -04:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/gameport.h>
|
|
|
|
#include <linux/moduleparam.h>
|
2006-03-28 04:56:48 -05:00
|
|
|
#include <linux/dma-mapping.h>
|
2005-04-16 18:20:36 -04:00
|
|
|
#include <sound/core.h>
|
|
|
|
#include <sound/control.h>
|
|
|
|
#include <sound/pcm.h>
|
|
|
|
#include <sound/rawmidi.h>
|
|
|
|
#include <sound/mpu401.h>
|
|
|
|
#include <sound/opl3.h>
|
|
|
|
#include <sound/initval.h>
|
|
|
|
#include "azt3328.h"
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
MODULE_AUTHOR("Andreas Mohr <andi AT lisas.de>");
|
2005-04-16 18:20:36 -04:00
|
|
|
MODULE_DESCRIPTION("Aztech AZF3328 (PCI168)");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}");
|
|
|
|
|
|
|
|
#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#define SUPPORT_GAMEPORT 1
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#define DEBUG_MISC 0
|
|
|
|
#define DEBUG_CALLS 0
|
|
|
|
#define DEBUG_MIXER 0
|
|
|
|
#define DEBUG_PLAY_REC 0
|
|
|
|
#define DEBUG_IO 0
|
2005-10-25 05:17:45 -04:00
|
|
|
#define DEBUG_TIMER 0
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#define DEBUG_GAME 0
|
2005-04-16 18:20:36 -04:00
|
|
|
#define MIXER_TESTING 0
|
|
|
|
|
|
|
|
#if DEBUG_MISC
|
|
|
|
#define snd_azf3328_dbgmisc(format, args...) printk(KERN_ERR format, ##args)
|
|
|
|
#else
|
|
|
|
#define snd_azf3328_dbgmisc(format, args...)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
#if DEBUG_CALLS
|
|
|
|
#define snd_azf3328_dbgcalls(format, args...) printk(format, ##args)
|
2008-03-03 18:32:18 -05:00
|
|
|
#define snd_azf3328_dbgcallenter() printk(KERN_ERR "--> %s\n", __func__)
|
|
|
|
#define snd_azf3328_dbgcallleave() printk(KERN_ERR "<-- %s\n", __func__)
|
2005-04-16 18:20:36 -04:00
|
|
|
#else
|
|
|
|
#define snd_azf3328_dbgcalls(format, args...)
|
|
|
|
#define snd_azf3328_dbgcallenter()
|
|
|
|
#define snd_azf3328_dbgcallleave()
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
#if DEBUG_MIXER
|
|
|
|
#define snd_azf3328_dbgmixer(format, args...) printk(format, ##args)
|
|
|
|
#else
|
|
|
|
#define snd_azf3328_dbgmixer(format, args...)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
#if DEBUG_PLAY_REC
|
|
|
|
#define snd_azf3328_dbgplay(format, args...) printk(KERN_ERR format, ##args)
|
|
|
|
#else
|
|
|
|
#define snd_azf3328_dbgplay(format, args...)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
#if DEBUG_MISC
|
|
|
|
#define snd_azf3328_dbgtimer(format, args...) printk(KERN_ERR format, ##args)
|
2005-04-16 18:20:36 -04:00
|
|
|
#else
|
2005-10-25 05:17:45 -04:00
|
|
|
#define snd_azf3328_dbgtimer(format, args...)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#if DEBUG_GAME
|
|
|
|
#define snd_azf3328_dbggame(format, args...) printk(KERN_ERR format, ##args)
|
|
|
|
#else
|
|
|
|
#define snd_azf3328_dbggame(format, args...)
|
|
|
|
#endif
|
2005-10-25 05:17:45 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
|
|
|
|
module_param_array(index, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(index, "Index value for AZF3328 soundcard.");
|
|
|
|
|
|
|
|
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
|
|
|
|
module_param_array(id, charp, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(id, "ID string for AZF3328 soundcard.");
|
|
|
|
|
|
|
|
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
|
|
|
|
module_param_array(enable, bool, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(enable, "Enable AZF3328 soundcard.");
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int seqtimer_scaling = 128;
|
|
|
|
module_param(seqtimer_scaling, int, 0444);
|
|
|
|
MODULE_PARM_DESC(seqtimer_scaling, "Set 1024000Hz sequencer timer scale factor (lockup danger!). Default 128.");
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
struct snd_azf3328_audio_stream {
|
|
|
|
struct snd_pcm_substream *substream;
|
|
|
|
int enabled;
|
|
|
|
int running;
|
|
|
|
unsigned long portbase;
|
|
|
|
};
|
|
|
|
|
|
|
|
enum snd_azf3328_stream_index {
|
|
|
|
AZF_PLAYBACK = 0,
|
|
|
|
AZF_CAPTURE = 1,
|
|
|
|
};
|
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 {
|
2005-10-25 05:17:45 -04:00
|
|
|
/* often-used fields towards beginning, then grouped */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
unsigned long codec_io; /* usually 0xb000, size 128 */
|
|
|
|
unsigned long game_io; /* usually 0xb400, size 8 */
|
|
|
|
unsigned long mpu_io; /* usually 0xb800, size 4 */
|
|
|
|
unsigned long opl3_io; /* usually 0xbc00, size 8 */
|
|
|
|
unsigned long mixer_io; /* usually 0xc000, size 64 */
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
spinlock_t reg_lock;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_timer *timer;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_pcm *pcm;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
struct snd_azf3328_audio_stream audio_stream[2];
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_card *card;
|
|
|
|
struct snd_rawmidi *rmidi;
|
2005-10-25 05:17:45 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#ifdef SUPPORT_GAMEPORT
|
2005-10-25 05:17:45 -04:00
|
|
|
struct gameport *gameport;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
int axes[4];
|
2005-10-25 05:17:45 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
struct pci_dev *pci;
|
|
|
|
int irq;
|
2006-05-17 05:02:24 -04:00
|
|
|
|
2008-06-23 05:50:47 -04:00
|
|
|
/* register 0x6a is write-only, thus need to remember setting.
|
|
|
|
* If we need to add more registers here, then we might try to fold this
|
|
|
|
* into some transparent combined shadow register handling with
|
|
|
|
* CONFIG_PM register storage below, but that's slightly difficult. */
|
|
|
|
u16 shadow_reg_codec_6AH;
|
|
|
|
|
2006-05-17 05:02:24 -04:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* register value containers for power management
|
|
|
|
* Note: not always full I/O range preserved (just like Win driver!) */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
u16 saved_regs_codec[AZF_IO_SIZE_CODEC_PM / 2];
|
|
|
|
u16 saved_regs_game [AZF_IO_SIZE_GAME_PM / 2];
|
|
|
|
u16 saved_regs_mpu [AZF_IO_SIZE_MPU_PM / 2];
|
|
|
|
u16 saved_regs_opl3 [AZF_IO_SIZE_OPL3_PM / 2];
|
2006-05-17 05:02:24 -04:00
|
|
|
u16 saved_regs_mixer[AZF_IO_SIZE_MIXER_PM / 2];
|
|
|
|
#endif
|
2005-11-17 09:02:42 -05:00
|
|
|
};
|
2005-10-25 05:17:45 -04:00
|
|
|
|
2006-07-05 10:51:05 -04:00
|
|
|
static const struct pci_device_id snd_azf3328_ids[] = {
|
2005-04-16 18:20:36 -04:00
|
|
|
{ 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* PCI168/3328 */
|
|
|
|
{ 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* 3328 */
|
|
|
|
{ 0, }
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, snd_azf3328_ids);
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
static int
|
|
|
|
snd_azf3328_io_reg_setb(unsigned reg, u8 mask, int do_set)
|
|
|
|
{
|
|
|
|
u8 prev = inb(reg), new;
|
|
|
|
|
|
|
|
new = (do_set) ? (prev|mask) : (prev & ~mask);
|
|
|
|
/* we need to always write the new value no matter whether it differs
|
|
|
|
* or not, since some register bits don't indicate their setting */
|
|
|
|
outb(new, reg);
|
|
|
|
if (new != prev)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static inline void
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
outb(value, chip->codec_io + reg);
|
2005-10-25 05:17:45 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline u8
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_inb(const struct snd_azf3328 *chip, unsigned reg)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
return inb(chip->codec_io + reg);
|
2005-10-25 05:17:45 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
outw(value, chip->codec_io + reg);
|
2005-10-25 05:17:45 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline u16
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_inw(const struct snd_azf3328 *chip, unsigned reg)
|
|
|
|
{
|
|
|
|
return inw(chip->codec_io + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
snd_azf3328_codec_outl(const struct snd_azf3328 *chip, unsigned reg, u32 value)
|
|
|
|
{
|
|
|
|
outl(value, chip->codec_io + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32
|
|
|
|
snd_azf3328_codec_inl(const struct snd_azf3328 *chip, unsigned reg)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
return inl(chip->codec_io + reg);
|
2005-10-25 05:17:45 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_game_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
outb(value, chip->game_io + reg);
|
2005-10-25 05:17:45 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_game_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
outw(value, chip->game_io + reg);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static inline u8
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_game_inb(const struct snd_azf3328 *chip, unsigned reg)
|
|
|
|
{
|
|
|
|
return inb(chip->game_io + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u16
|
|
|
|
snd_azf3328_game_inw(const struct snd_azf3328 *chip, unsigned reg)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
return inw(chip->game_io + reg);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static inline void
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_mixer_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
outw(value, chip->mixer_io + reg);
|
2005-10-25 05:17:45 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline u16
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_mixer_inw(const struct snd_azf3328 *chip, unsigned reg)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
return inw(chip->mixer_io + reg);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#define AZF_MUTE_BIT 0x80
|
|
|
|
|
|
|
|
static int
|
|
|
|
snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip,
|
|
|
|
unsigned reg, int do_mute
|
|
|
|
)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
unsigned long portbase = chip->mixer_io + reg + 1;
|
|
|
|
int updated;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* the mute bit is on the *second* (i.e. right) register of a
|
|
|
|
* left/right channel setting */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
updated = snd_azf3328_io_reg_setb(portbase, AZF_MUTE_BIT, do_mute);
|
|
|
|
|
|
|
|
/* indicate whether it was muted before */
|
|
|
|
return (do_mute) ? !updated : updated;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static void
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip,
|
|
|
|
unsigned reg,
|
|
|
|
unsigned char dst_vol_left,
|
|
|
|
unsigned char dst_vol_right,
|
|
|
|
int chan_sel, int delay
|
|
|
|
)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
unsigned long portbase = chip->mixer_io + reg;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned char curr_vol_left = 0, curr_vol_right = 0;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
int left_change = 0, right_change = 0;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallenter();
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
if (chan_sel & SET_CHAN_LEFT) {
|
2005-10-25 05:17:45 -04:00
|
|
|
curr_vol_left = inb(portbase + 1);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
/* take care of muting flag contained in left channel */
|
|
|
|
if (curr_vol_left & AZF_MUTE_BIT)
|
|
|
|
dst_vol_left |= AZF_MUTE_BIT;
|
|
|
|
else
|
|
|
|
dst_vol_left &= ~AZF_MUTE_BIT;
|
|
|
|
|
|
|
|
left_change = (curr_vol_left > dst_vol_left) ? -1 : 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (chan_sel & SET_CHAN_RIGHT) {
|
2005-10-25 05:17:45 -04:00
|
|
|
curr_vol_right = inb(portbase + 0);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
right_change = (curr_vol_right > dst_vol_right) ? -1 : 1;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2006-05-17 05:04:19 -04:00
|
|
|
do {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (left_change) {
|
|
|
|
if (curr_vol_left != dst_vol_left) {
|
|
|
|
curr_vol_left += left_change;
|
|
|
|
outb(curr_vol_left, portbase + 1);
|
|
|
|
} else
|
|
|
|
left_change = 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (right_change) {
|
|
|
|
if (curr_vol_right != dst_vol_right) {
|
|
|
|
curr_vol_right += right_change;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* during volume change, the right channel is crackling
|
|
|
|
* somewhat more than the left channel, unfortunately.
|
|
|
|
* This seems to be a hardware issue. */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
outb(curr_vol_right, portbase + 0);
|
|
|
|
} else
|
|
|
|
right_change = 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
if (delay)
|
|
|
|
mdelay(delay);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
} while ((left_change) || (right_change));
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* general mixer element
|
|
|
|
*/
|
2005-11-17 09:02:42 -05:00
|
|
|
struct azf3328_mixer_reg {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
unsigned reg;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int lchan_shift, rchan_shift;
|
|
|
|
unsigned int mask;
|
|
|
|
unsigned int invert: 1;
|
|
|
|
unsigned int stereo: 1;
|
|
|
|
unsigned int enum_c: 4;
|
2005-11-17 09:02:42 -05:00
|
|
|
};
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
#define COMPOSE_MIXER_REG(reg,lchan_shift,rchan_shift,mask,invert,stereo,enum_c) \
|
2005-10-25 05:17:45 -04:00
|
|
|
((reg) | (lchan_shift << 8) | (rchan_shift << 12) | \
|
|
|
|
(mask << 16) | \
|
|
|
|
(invert << 24) | \
|
|
|
|
(stereo << 25) | \
|
|
|
|
(enum_c << 26))
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
static void snd_azf3328_mixer_reg_decode(struct azf3328_mixer_reg *r, unsigned long val)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
r->reg = val & 0xff;
|
|
|
|
r->lchan_shift = (val >> 8) & 0x0f;
|
|
|
|
r->rchan_shift = (val >> 12) & 0x0f;
|
|
|
|
r->mask = (val >> 16) & 0xff;
|
|
|
|
r->invert = (val >> 24) & 1;
|
|
|
|
r->stereo = (val >> 25) & 1;
|
|
|
|
r->enum_c = (val >> 26) & 0x0f;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mixer switches/volumes
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define AZF3328_MIXER_SWITCH(xname, reg, shift, invert) \
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
|
|
.info = snd_azf3328_info_mixer, \
|
|
|
|
.get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \
|
|
|
|
.private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0x1, invert, 0, 0), \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define AZF3328_MIXER_VOL_STEREO(xname, reg, mask, invert) \
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
|
|
.info = snd_azf3328_info_mixer, \
|
|
|
|
.get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \
|
|
|
|
.private_value = COMPOSE_MIXER_REG(reg, 8, 0, mask, invert, 1, 0), \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define AZF3328_MIXER_VOL_MONO(xname, reg, mask, is_right_chan) \
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
|
|
.info = snd_azf3328_info_mixer, \
|
|
|
|
.get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \
|
|
|
|
.private_value = COMPOSE_MIXER_REG(reg, is_right_chan ? 0 : 8, 0, mask, 1, 0, 0), \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define AZF3328_MIXER_VOL_SPECIAL(xname, reg, mask, shift, invert) \
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
|
|
.info = snd_azf3328_info_mixer, \
|
|
|
|
.get = snd_azf3328_get_mixer, .put = snd_azf3328_put_mixer, \
|
|
|
|
.private_value = COMPOSE_MIXER_REG(reg, shift, 0, mask, invert, 0, 0), \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define AZF3328_MIXER_ENUM(xname, reg, enum_c, shift) \
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
|
|
.info = snd_azf3328_info_mixer_enum, \
|
|
|
|
.get = snd_azf3328_get_mixer_enum, .put = snd_azf3328_put_mixer_enum, \
|
|
|
|
.private_value = COMPOSE_MIXER_REG(reg, shift, 0, 0, 0, 0, enum_c), \
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_info_mixer(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct azf3328_mixer_reg reg;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
2005-10-25 05:17:45 -04:00
|
|
|
uinfo->type = reg.mask == 1 ?
|
|
|
|
SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
|
2005-04-16 18:20:36 -04:00
|
|
|
uinfo->count = reg.stereo + 1;
|
|
|
|
uinfo->value.integer.min = 0;
|
|
|
|
uinfo->value.integer.max = reg.mask;
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_get_mixer(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct azf3328_mixer_reg reg;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int oreg, val;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
oreg = snd_azf3328_mixer_inw(chip, reg.reg);
|
2005-04-16 18:20:36 -04:00
|
|
|
val = (oreg >> reg.lchan_shift) & reg.mask;
|
|
|
|
if (reg.invert)
|
|
|
|
val = reg.mask - val;
|
|
|
|
ucontrol->value.integer.value[0] = val;
|
|
|
|
if (reg.stereo) {
|
|
|
|
val = (oreg >> reg.rchan_shift) & reg.mask;
|
|
|
|
if (reg.invert)
|
|
|
|
val = reg.mask - val;
|
|
|
|
ucontrol->value.integer.value[1] = val;
|
|
|
|
}
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgmixer("get: %02x is %04x -> vol %02lx|%02lx "
|
|
|
|
"(shift %02d|%02d, mask %02x, inv. %d, stereo %d)\n",
|
|
|
|
reg.reg, oreg,
|
|
|
|
ucontrol->value.integer.value[0], ucontrol->value.integer.value[1],
|
|
|
|
reg.lchan_shift, reg.rchan_shift, reg.mask, reg.invert, reg.stereo);
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_put_mixer(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct azf3328_mixer_reg reg;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int oreg, nreg, val;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
2005-10-25 05:17:45 -04:00
|
|
|
oreg = snd_azf3328_mixer_inw(chip, reg.reg);
|
2005-04-16 18:20:36 -04:00
|
|
|
val = ucontrol->value.integer.value[0] & reg.mask;
|
|
|
|
if (reg.invert)
|
|
|
|
val = reg.mask - val;
|
|
|
|
nreg = oreg & ~(reg.mask << reg.lchan_shift);
|
|
|
|
nreg |= (val << reg.lchan_shift);
|
|
|
|
if (reg.stereo) {
|
|
|
|
val = ucontrol->value.integer.value[1] & reg.mask;
|
|
|
|
if (reg.invert)
|
|
|
|
val = reg.mask - val;
|
|
|
|
nreg &= ~(reg.mask << reg.rchan_shift);
|
|
|
|
nreg |= (val << reg.rchan_shift);
|
|
|
|
}
|
|
|
|
if (reg.mask >= 0x07) /* it's a volume control, so better take care */
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_mixer_write_volume_gradually(
|
|
|
|
chip, reg.reg, nreg >> 8, nreg & 0xff,
|
|
|
|
/* just set both channels, doesn't matter */
|
|
|
|
SET_CHAN_LEFT|SET_CHAN_RIGHT,
|
|
|
|
0);
|
2005-04-16 18:20:36 -04:00
|
|
|
else
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_mixer_outw(chip, reg.reg, nreg);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgmixer("put: %02x to %02lx|%02lx, "
|
|
|
|
"oreg %04x; shift %02d|%02d -> nreg %04x; after: %04x\n",
|
|
|
|
reg.reg, ucontrol->value.integer.value[0], ucontrol->value.integer.value[1],
|
|
|
|
oreg, reg.lchan_shift, reg.rchan_shift,
|
|
|
|
nreg, snd_azf3328_mixer_inw(chip, reg.reg));
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return (nreg != oreg);
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-10-25 05:17:45 -04:00
|
|
|
static const char * const texts1[] = {
|
2006-05-17 05:03:16 -04:00
|
|
|
"Mic1", "Mic2"
|
2005-10-25 05:17:45 -04:00
|
|
|
};
|
|
|
|
static const char * const texts2[] = {
|
2006-05-17 05:03:16 -04:00
|
|
|
"Mix", "Mic"
|
2005-10-25 05:17:45 -04:00
|
|
|
};
|
|
|
|
static const char * const texts3[] = {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
"Mic", "CD", "Video", "Aux",
|
2005-10-25 05:17:45 -04:00
|
|
|
"Line", "Mix", "Mix Mono", "Phone"
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
2006-05-17 05:03:16 -04:00
|
|
|
static const char * const texts4[] = {
|
|
|
|
"pre 3D", "post 3D"
|
|
|
|
};
|
2005-11-17 09:02:42 -05:00
|
|
|
struct azf3328_mixer_reg reg;
|
2008-06-23 05:50:47 -04:00
|
|
|
const char * const *p = NULL;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
|
|
uinfo->count = (reg.reg == IDX_MIXER_REC_SELECT) ? 2 : 1;
|
|
|
|
uinfo->value.enumerated.items = reg.enum_c;
|
|
|
|
if (uinfo->value.enumerated.item > reg.enum_c - 1U)
|
|
|
|
uinfo->value.enumerated.item = reg.enum_c - 1U;
|
2006-05-17 05:04:19 -04:00
|
|
|
if (reg.reg == IDX_MIXER_ADVCTL2) {
|
2006-05-17 05:03:16 -04:00
|
|
|
switch(reg.lchan_shift) {
|
|
|
|
case 8: /* modem out sel */
|
2008-06-23 05:50:47 -04:00
|
|
|
p = texts1;
|
2006-05-17 05:03:16 -04:00
|
|
|
break;
|
|
|
|
case 9: /* mono sel source */
|
2008-06-23 05:50:47 -04:00
|
|
|
p = texts2;
|
2006-05-17 05:03:16 -04:00
|
|
|
break;
|
|
|
|
case 15: /* PCM Out Path */
|
2008-06-23 05:50:47 -04:00
|
|
|
p = texts4;
|
2006-05-17 05:03:16 -04:00
|
|
|
break;
|
|
|
|
}
|
2006-05-17 05:04:19 -04:00
|
|
|
} else
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (reg.reg == IDX_MIXER_REC_SELECT)
|
2008-06-23 05:50:47 -04:00
|
|
|
p = texts3;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2008-06-23 05:50:47 -04:00
|
|
|
strcpy(uinfo->value.enumerated.name, p[uinfo->value.enumerated.item]);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_get_mixer_enum(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct azf3328_mixer_reg reg;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned short val;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
2005-10-25 05:17:45 -04:00
|
|
|
val = snd_azf3328_mixer_inw(chip, reg.reg);
|
2006-05-17 05:04:19 -04:00
|
|
|
if (reg.reg == IDX_MIXER_REC_SELECT) {
|
2005-04-16 18:20:36 -04:00
|
|
|
ucontrol->value.enumerated.item[0] = (val >> 8) & (reg.enum_c - 1);
|
|
|
|
ucontrol->value.enumerated.item[1] = (val >> 0) & (reg.enum_c - 1);
|
2006-05-17 05:04:19 -04:00
|
|
|
} else
|
2005-04-16 18:20:36 -04:00
|
|
|
ucontrol->value.enumerated.item[0] = (val >> reg.lchan_shift) & (reg.enum_c - 1);
|
2005-10-25 05:17:45 -04:00
|
|
|
|
|
|
|
snd_azf3328_dbgmixer("get_enum: %02x is %04x -> %d|%d (shift %02d, enum_c %d)\n",
|
|
|
|
reg.reg, val, ucontrol->value.enumerated.item[0], ucontrol->value.enumerated.item[1],
|
|
|
|
reg.lchan_shift, reg.enum_c);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_put_mixer_enum(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
|
|
|
|
struct azf3328_mixer_reg reg;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int oreg, nreg, val;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
|
2005-10-25 05:17:45 -04:00
|
|
|
oreg = snd_azf3328_mixer_inw(chip, reg.reg);
|
2005-04-16 18:20:36 -04:00
|
|
|
val = oreg;
|
2006-05-17 05:04:19 -04:00
|
|
|
if (reg.reg == IDX_MIXER_REC_SELECT) {
|
2005-04-16 18:20:36 -04:00
|
|
|
if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U ||
|
|
|
|
ucontrol->value.enumerated.item[1] > reg.enum_c - 1U)
|
|
|
|
return -EINVAL;
|
|
|
|
val = (ucontrol->value.enumerated.item[0] << 8) |
|
|
|
|
(ucontrol->value.enumerated.item[1] << 0);
|
2006-05-17 05:04:19 -04:00
|
|
|
} else {
|
2005-04-16 18:20:36 -04:00
|
|
|
if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U)
|
|
|
|
return -EINVAL;
|
|
|
|
val &= ~((reg.enum_c - 1) << reg.lchan_shift);
|
|
|
|
val |= (ucontrol->value.enumerated.item[0] << reg.lchan_shift);
|
|
|
|
}
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_mixer_outw(chip, reg.reg, val);
|
2005-04-16 18:20:36 -04:00
|
|
|
nreg = val;
|
|
|
|
|
|
|
|
snd_azf3328_dbgmixer("put_enum: %02x to %04x, oreg %04x\n", reg.reg, val, oreg);
|
|
|
|
return (nreg != oreg);
|
|
|
|
}
|
|
|
|
|
2007-03-13 17:13:47 -04:00
|
|
|
static struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata = {
|
2005-04-16 18:20:36 -04:00
|
|
|
AZF3328_MIXER_SWITCH("Master Playback Switch", IDX_MIXER_PLAY_MASTER, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_STEREO("Master Playback Volume", IDX_MIXER_PLAY_MASTER, 0x1f, 1),
|
2008-06-23 05:50:47 -04:00
|
|
|
AZF3328_MIXER_SWITCH("PCM Playback Switch", IDX_MIXER_WAVEOUT, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_STEREO("PCM Playback Volume",
|
|
|
|
IDX_MIXER_WAVEOUT, 0x1f, 1),
|
|
|
|
AZF3328_MIXER_SWITCH("PCM 3D Bypass Playback Switch",
|
|
|
|
IDX_MIXER_ADVCTL2, 7, 1),
|
2005-04-16 18:20:36 -04:00
|
|
|
AZF3328_MIXER_SWITCH("FM Playback Switch", IDX_MIXER_FMSYNTH, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_STEREO("FM Playback Volume", IDX_MIXER_FMSYNTH, 0x1f, 1),
|
|
|
|
AZF3328_MIXER_SWITCH("CD Playback Switch", IDX_MIXER_CDAUDIO, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_STEREO("CD Playback Volume", IDX_MIXER_CDAUDIO, 0x1f, 1),
|
|
|
|
AZF3328_MIXER_SWITCH("Capture Switch", IDX_MIXER_REC_VOLUME, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_STEREO("Capture Volume", IDX_MIXER_REC_VOLUME, 0x0f, 0),
|
|
|
|
AZF3328_MIXER_ENUM("Capture Source", IDX_MIXER_REC_SELECT, 8, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("Mic Playback Switch", IDX_MIXER_MIC, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_MONO("Mic Playback Volume", IDX_MIXER_MIC, 0x1f, 1),
|
|
|
|
AZF3328_MIXER_SWITCH("Mic Boost (+20dB)", IDX_MIXER_MIC, 6, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("Line Playback Switch", IDX_MIXER_LINEIN, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_STEREO("Line Playback Volume", IDX_MIXER_LINEIN, 0x1f, 1),
|
2005-10-25 05:17:45 -04:00
|
|
|
AZF3328_MIXER_SWITCH("PC Speaker Playback Switch", IDX_MIXER_PCBEEP, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_SPECIAL("PC Speaker Playback Volume", IDX_MIXER_PCBEEP, 0x0f, 1, 1),
|
2005-04-16 18:20:36 -04:00
|
|
|
AZF3328_MIXER_SWITCH("Video Playback Switch", IDX_MIXER_VIDEO, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_STEREO("Video Playback Volume", IDX_MIXER_VIDEO, 0x1f, 1),
|
|
|
|
AZF3328_MIXER_SWITCH("Aux Playback Switch", IDX_MIXER_AUX, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_STEREO("Aux Playback Volume", IDX_MIXER_AUX, 0x1f, 1),
|
|
|
|
AZF3328_MIXER_SWITCH("Modem Playback Switch", IDX_MIXER_MODEMOUT, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_MONO("Modem Playback Volume", IDX_MIXER_MODEMOUT, 0x1f, 1),
|
|
|
|
AZF3328_MIXER_SWITCH("Modem Capture Switch", IDX_MIXER_MODEMIN, 15, 1),
|
|
|
|
AZF3328_MIXER_VOL_MONO("Modem Capture Volume", IDX_MIXER_MODEMIN, 0x1f, 1),
|
2006-05-17 05:03:16 -04:00
|
|
|
AZF3328_MIXER_ENUM("Mic Select", IDX_MIXER_ADVCTL2, 2, 8),
|
|
|
|
AZF3328_MIXER_ENUM("Mono Output Select", IDX_MIXER_ADVCTL2, 2, 9),
|
2007-03-26 06:49:45 -04:00
|
|
|
AZF3328_MIXER_ENUM("PCM Output Route", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */
|
2005-04-16 18:20:36 -04:00
|
|
|
AZF3328_MIXER_VOL_SPECIAL("Tone Control - Treble", IDX_MIXER_BASSTREBLE, 0x07, 1, 0),
|
|
|
|
AZF3328_MIXER_VOL_SPECIAL("Tone Control - Bass", IDX_MIXER_BASSTREBLE, 0x07, 9, 0),
|
2005-10-25 05:17:45 -04:00
|
|
|
AZF3328_MIXER_SWITCH("3D Control - Switch", IDX_MIXER_ADVCTL2, 13, 0),
|
2006-05-17 05:03:16 -04:00
|
|
|
AZF3328_MIXER_VOL_SPECIAL("3D Control - Width", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */
|
|
|
|
AZF3328_MIXER_VOL_SPECIAL("3D Control - Depth", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */
|
2005-04-16 18:20:36 -04:00
|
|
|
#if MIXER_TESTING
|
|
|
|
AZF3328_MIXER_SWITCH("0", IDX_MIXER_ADVCTL2, 0, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("1", IDX_MIXER_ADVCTL2, 1, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("2", IDX_MIXER_ADVCTL2, 2, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("3", IDX_MIXER_ADVCTL2, 3, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("4", IDX_MIXER_ADVCTL2, 4, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("5", IDX_MIXER_ADVCTL2, 5, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("6", IDX_MIXER_ADVCTL2, 6, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("7", IDX_MIXER_ADVCTL2, 7, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("8", IDX_MIXER_ADVCTL2, 8, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("9", IDX_MIXER_ADVCTL2, 9, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("10", IDX_MIXER_ADVCTL2, 10, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("11", IDX_MIXER_ADVCTL2, 11, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("12", IDX_MIXER_ADVCTL2, 12, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("13", IDX_MIXER_ADVCTL2, 13, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("14", IDX_MIXER_ADVCTL2, 14, 0),
|
|
|
|
AZF3328_MIXER_SWITCH("15", IDX_MIXER_ADVCTL2, 15, 0),
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
2007-03-13 17:13:47 -04:00
|
|
|
static u16 __devinitdata snd_azf3328_init_values[][2] = {
|
2005-04-16 18:20:36 -04:00
|
|
|
{ IDX_MIXER_PLAY_MASTER, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_MODEMOUT, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_BASSTREBLE, 0x0000 },
|
|
|
|
{ IDX_MIXER_PCBEEP, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_MODEMIN, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_MIC, MIXER_MUTE_MASK|0x001f },
|
|
|
|
{ IDX_MIXER_LINEIN, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_CDAUDIO, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_VIDEO, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_AUX, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_WAVEOUT, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_FMSYNTH, MIXER_MUTE_MASK|0x1f1f },
|
|
|
|
{ IDX_MIXER_REC_VOLUME, MIXER_MUTE_MASK|0x0707 },
|
|
|
|
};
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int __devinit
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_mixer_new(struct snd_azf3328 *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_card *card;
|
|
|
|
const struct snd_kcontrol_new *sw;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int idx;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
snd_assert(chip != NULL && chip->card != NULL, return -EINVAL);
|
|
|
|
|
|
|
|
card = chip->card;
|
|
|
|
|
|
|
|
/* mixer reset */
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* mute and zero volume channels */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_init_values); ++idx) {
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_mixer_outw(chip,
|
|
|
|
snd_azf3328_init_values[idx][0],
|
|
|
|
snd_azf3328_init_values[idx][1]);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* add mixer controls */
|
|
|
|
sw = snd_azf3328_mixer_controls;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_mixer_controls);
|
|
|
|
++idx, ++sw) {
|
2005-04-16 18:20:36 -04:00
|
|
|
if ((err = snd_ctl_add(chip->card, snd_ctl_new1(sw, chip))) < 0)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
snd_component_add(card, "AZF3328 mixer");
|
|
|
|
strcpy(card->mixername, "AZF3328 mixer");
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_hw_params(struct snd_pcm_substream *substream,
|
|
|
|
struct snd_pcm_hw_params *hw_params)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
int res;
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
res = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_hw_free(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
snd_pcm_lib_free_pages(substream);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static void
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_setfmt(struct snd_azf3328 *chip,
|
|
|
|
unsigned reg,
|
2008-06-23 05:50:47 -04:00
|
|
|
enum azf_freq_t bitrate,
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int format_width,
|
|
|
|
unsigned int channels
|
|
|
|
)
|
|
|
|
{
|
2005-10-25 05:17:45 -04:00
|
|
|
u16 val = 0xff00;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
switch (bitrate) {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
case AZF_FREQ_4000: val |= SOUNDFORMAT_FREQ_SUSPECTED_4000; break;
|
|
|
|
case AZF_FREQ_4800: val |= SOUNDFORMAT_FREQ_SUSPECTED_4800; break;
|
|
|
|
case AZF_FREQ_5512:
|
|
|
|
/* the AZF3328 names it "5510" for some strange reason */
|
|
|
|
val |= SOUNDFORMAT_FREQ_5510; break;
|
|
|
|
case AZF_FREQ_6620: val |= SOUNDFORMAT_FREQ_6620; break;
|
|
|
|
case AZF_FREQ_8000: val |= SOUNDFORMAT_FREQ_8000; break;
|
|
|
|
case AZF_FREQ_9600: val |= SOUNDFORMAT_FREQ_9600; break;
|
|
|
|
case AZF_FREQ_11025: val |= SOUNDFORMAT_FREQ_11025; break;
|
|
|
|
case AZF_FREQ_13240: val |= SOUNDFORMAT_FREQ_SUSPECTED_13240; break;
|
|
|
|
case AZF_FREQ_16000: val |= SOUNDFORMAT_FREQ_16000; break;
|
|
|
|
case AZF_FREQ_22050: val |= SOUNDFORMAT_FREQ_22050; break;
|
|
|
|
case AZF_FREQ_32000: val |= SOUNDFORMAT_FREQ_32000; break;
|
2005-04-16 18:20:36 -04:00
|
|
|
default:
|
2005-10-20 12:26:44 -04:00
|
|
|
snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* fall-through */
|
|
|
|
case AZF_FREQ_44100: val |= SOUNDFORMAT_FREQ_44100; break;
|
|
|
|
case AZF_FREQ_48000: val |= SOUNDFORMAT_FREQ_48000; break;
|
|
|
|
case AZF_FREQ_66200: val |= SOUNDFORMAT_FREQ_SUSPECTED_66200; break;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
2005-10-25 05:17:45 -04:00
|
|
|
/* val = 0xff07; 3m27.993s (65301Hz; -> 64000Hz???) hmm, 66120, 65967, 66123 */
|
|
|
|
/* val = 0xff09; 17m15.098s (13123,478Hz; -> 12000Hz???) hmm, 13237.2Hz? */
|
|
|
|
/* val = 0xff0a; 47m30.599s (4764,891Hz; -> 4800Hz???) yup, 4803Hz */
|
|
|
|
/* val = 0xff0c; 57m0.510s (4010,263Hz; -> 4000Hz???) yup, 4003Hz */
|
2005-04-16 18:20:36 -04:00
|
|
|
/* val = 0xff05; 5m11.556s (... -> 44100Hz) */
|
|
|
|
/* val = 0xff03; 10m21.529s (21872,463Hz; -> 22050Hz???) */
|
|
|
|
/* val = 0xff0f; 20m41.883s (10937,993Hz; -> 11025Hz???) */
|
|
|
|
/* val = 0xff0d; 41m23.135s (5523,600Hz; -> 5512Hz???) */
|
|
|
|
/* val = 0xff0e; 28m30.777s (8017Hz; -> 8000Hz???) */
|
2005-10-25 05:17:45 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (channels == 2)
|
|
|
|
val |= SOUNDFORMAT_FLAG_2CHANNELS;
|
|
|
|
|
|
|
|
if (format_width == 16)
|
|
|
|
val |= SOUNDFORMAT_FLAG_16BIT;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* set bitrate/format */
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, reg, val);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* changing the bitrate/format settings switches off the
|
|
|
|
* audio output with an annoying click in case of 8/16bit format change
|
|
|
|
* (maybe shutting down DAC/ADC?), thus immediately
|
|
|
|
* do some tweaking to reenable it and get rid of the clicking
|
|
|
|
* (FIXME: yes, it works, but what exactly am I doing here?? :)
|
|
|
|
* FIXME: does this have some side effects for full-duplex
|
|
|
|
* or other dramatic side effects? */
|
|
|
|
if (reg == IDX_IO_PLAY_SOUNDFORMAT) /* only do it for playback */
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) |
|
|
|
|
DMA_PLAY_SOMETHING1 |
|
|
|
|
DMA_PLAY_SOMETHING2 |
|
|
|
|
SOMETHING_ALMOST_ALWAYS_SET |
|
|
|
|
DMA_EPILOGUE_SOMETHING |
|
|
|
|
DMA_SOMETHING_ELSE
|
|
|
|
);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
}
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
static inline void
|
|
|
|
snd_azf3328_codec_setfmt_lowpower(struct snd_azf3328 *chip,
|
|
|
|
unsigned reg
|
|
|
|
)
|
|
|
|
{
|
|
|
|
/* choose lowest frequency for low power consumption.
|
|
|
|
* While this will cause louder noise due to rather coarse frequency,
|
|
|
|
* it should never matter since output should always
|
|
|
|
* get disabled properly when idle anyway. */
|
|
|
|
snd_azf3328_codec_setfmt(chip, reg, AZF_FREQ_4000, 8, 1);
|
|
|
|
}
|
|
|
|
|
2008-06-23 05:50:47 -04:00
|
|
|
static void
|
|
|
|
snd_azf3328_codec_reg_6AH_update(struct snd_azf3328 *chip,
|
|
|
|
unsigned bitmask,
|
|
|
|
int enable
|
|
|
|
)
|
|
|
|
{
|
|
|
|
if (enable)
|
|
|
|
chip->shadow_reg_codec_6AH &= ~bitmask;
|
|
|
|
else
|
|
|
|
chip->shadow_reg_codec_6AH |= bitmask;
|
|
|
|
snd_azf3328_dbgplay("6AH_update mask 0x%04x enable %d: val 0x%04x\n",
|
|
|
|
bitmask, enable, chip->shadow_reg_codec_6AH);
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_6AH, chip->shadow_reg_codec_6AH);
|
|
|
|
}
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
static inline void
|
|
|
|
snd_azf3328_codec_enable(struct snd_azf3328 *chip, int enable)
|
|
|
|
{
|
2008-06-23 05:50:47 -04:00
|
|
|
snd_azf3328_dbgplay("codec_enable %d\n", enable);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* no idea what exactly is being done here, but I strongly assume it's
|
|
|
|
* PM related */
|
2008-06-23 05:50:47 -04:00
|
|
|
snd_azf3328_codec_reg_6AH_update(
|
|
|
|
chip, IO_6A_PAUSE_PLAYBACK_BIT8, enable
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
snd_azf3328_codec_activity(struct snd_azf3328 *chip,
|
|
|
|
enum snd_azf3328_stream_index stream_type,
|
|
|
|
int enable
|
|
|
|
)
|
|
|
|
{
|
|
|
|
int need_change = (chip->audio_stream[stream_type].running != enable);
|
|
|
|
|
|
|
|
snd_azf3328_dbgplay(
|
|
|
|
"codec_activity: type %d, enable %d, need_change %d\n",
|
|
|
|
stream_type, enable, need_change
|
|
|
|
);
|
|
|
|
if (need_change) {
|
|
|
|
enum snd_azf3328_stream_index other =
|
|
|
|
(stream_type == AZF_PLAYBACK) ?
|
|
|
|
AZF_CAPTURE : AZF_PLAYBACK;
|
|
|
|
/* small check to prevent shutting down the other party
|
|
|
|
* in case it's active */
|
|
|
|
if ((enable) || !(chip->audio_stream[other].running))
|
|
|
|
snd_azf3328_codec_enable(chip, enable);
|
|
|
|
|
|
|
|
/* ...and adjust clock, too
|
|
|
|
* (reduce noise and power consumption) */
|
|
|
|
if (!enable)
|
|
|
|
snd_azf3328_codec_setfmt_lowpower(
|
|
|
|
chip,
|
|
|
|
chip->audio_stream[stream_type].portbase
|
|
|
|
+ IDX_IO_PLAY_SOUNDFORMAT
|
|
|
|
);
|
|
|
|
}
|
|
|
|
chip->audio_stream[stream_type].running = enable;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static void
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_setdmaa(struct snd_azf3328 *chip,
|
2005-04-16 18:20:36 -04:00
|
|
|
long unsigned int addr,
|
|
|
|
unsigned int count,
|
|
|
|
unsigned int size,
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
enum snd_azf3328_stream_index stream_type
|
|
|
|
)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
snd_azf3328_dbgcallenter();
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (!chip->audio_stream[stream_type].running) {
|
|
|
|
/* AZF3328 uses a two buffer pointer DMA playback approach */
|
|
|
|
|
|
|
|
unsigned long flags, portbase, addr_area2;
|
|
|
|
|
|
|
|
/* width 32bit (prevent overflow): */
|
|
|
|
unsigned long count_areas, count_tmp;
|
2005-10-25 05:17:45 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
portbase = chip->audio_stream[stream_type].portbase;
|
2005-10-25 05:17:45 -04:00
|
|
|
count_areas = size/2;
|
|
|
|
addr_area2 = addr+count_areas;
|
|
|
|
count_areas--; /* max. index */
|
|
|
|
snd_azf3328_dbgplay("set DMA: buf1 %08lx[%lu], buf2 %08lx[%lu]\n", addr, count_areas, addr_area2, count_areas);
|
|
|
|
|
|
|
|
/* build combined I/O buffer length word */
|
|
|
|
count_tmp = count_areas;
|
|
|
|
count_areas |= (count_tmp << 16);
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
2005-10-25 05:17:45 -04:00
|
|
|
outl(addr, portbase + IDX_IO_PLAY_DMA_START_1);
|
|
|
|
outl(addr_area2, portbase + IDX_IO_PLAY_DMA_START_2);
|
|
|
|
outl(count_areas, portbase + IDX_IO_PLAY_DMA_LEN_1);
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
}
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_playback_prepare(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
#if 0
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int size = snd_pcm_lib_buffer_bytes(substream);
|
|
|
|
unsigned int count = snd_pcm_lib_period_bytes(substream);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
#if 0
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT,
|
2005-10-25 05:17:45 -04:00
|
|
|
runtime->rate,
|
|
|
|
snd_pcm_format_width(runtime->format),
|
|
|
|
runtime->channels);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, AZF_PLAYBACK);
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_capture_prepare(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
#if 0
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
2005-04-16 18:20:36 -04:00
|
|
|
unsigned int size = snd_pcm_lib_buffer_bytes(substream);
|
|
|
|
unsigned int count = snd_pcm_lib_period_bytes(substream);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
#if 0
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_setfmt(chip, IDX_IO_REC_SOUNDFORMAT,
|
2005-10-25 05:17:45 -04:00
|
|
|
runtime->rate,
|
|
|
|
snd_pcm_format_width(runtime->format),
|
|
|
|
runtime->channels);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, AZF_CAPTURE);
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
2005-04-16 18:20:36 -04:00
|
|
|
int result = 0;
|
|
|
|
unsigned int status1;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
int previously_muted;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_azf3328_dbgcalls("snd_azf3328_playback_trigger cmd %d\n", cmd);
|
2005-10-25 05:17:45 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
switch (cmd) {
|
|
|
|
case SNDRV_PCM_TRIGGER_START:
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("START PLAYBACK\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* mute WaveOut (avoid clicking during setup) */
|
|
|
|
previously_muted =
|
|
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT,
|
2005-10-25 05:17:45 -04:00
|
|
|
runtime->rate,
|
|
|
|
snd_pcm_format_width(runtime->format),
|
|
|
|
runtime->channels);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
spin_lock(&chip->reg_lock);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* first, remember current value: */
|
2005-10-25 05:17:45 -04:00
|
|
|
status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
/* stop playback */
|
2005-04-16 18:20:36 -04:00
|
|
|
status1 &= ~DMA_RESUME;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* FIXME: clear interrupts or what??? */
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_IRQTYPE, 0xffff);
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_setdmaa(chip, runtime->dma_addr,
|
|
|
|
snd_pcm_lib_period_bytes(substream),
|
|
|
|
snd_pcm_lib_buffer_bytes(substream),
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
AZF_PLAYBACK);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
#ifdef WIN9X
|
|
|
|
/* FIXME: enable playback/recording??? */
|
|
|
|
status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* start playback again */
|
|
|
|
/* FIXME: what is this value (0x0010)??? */
|
|
|
|
status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
#else /* NT4 */
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
|
|
0x0000);
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
|
|
DMA_PLAY_SOMETHING1);
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
|
|
DMA_PLAY_SOMETHING1 |
|
|
|
|
DMA_PLAY_SOMETHING2);
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
|
|
DMA_RESUME |
|
|
|
|
SOMETHING_ALMOST_ALWAYS_SET |
|
|
|
|
DMA_EPILOGUE_SOMETHING |
|
|
|
|
DMA_SOMETHING_ELSE);
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
spin_unlock(&chip->reg_lock);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* now unmute WaveOut */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (!previously_muted)
|
|
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("STARTED PLAYBACK\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
2006-05-17 05:02:24 -04:00
|
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
|
|
snd_azf3328_dbgplay("RESUME PLAYBACK\n");
|
|
|
|
/* resume playback if we were active */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
if (chip->audio_stream[AZF_PLAYBACK].running)
|
2006-05-17 05:02:24 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | DMA_RESUME);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
spin_unlock(&chip->reg_lock);
|
2006-05-17 05:02:24 -04:00
|
|
|
break;
|
2005-10-25 05:17:45 -04:00
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
|
|
snd_azf3328_dbgplay("STOP PLAYBACK\n");
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* mute WaveOut (avoid clicking during setup) */
|
|
|
|
previously_muted =
|
|
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
spin_lock(&chip->reg_lock);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* first, remember current value: */
|
2005-10-25 05:17:45 -04:00
|
|
|
status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* stop playback */
|
2005-04-16 18:20:36 -04:00
|
|
|
status1 &= ~DMA_RESUME;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
/* hmm, is this really required? we're resetting the same bit
|
|
|
|
* immediately thereafter... */
|
2005-04-16 18:20:36 -04:00
|
|
|
status1 |= DMA_PLAY_SOMETHING1;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
status1 &= ~DMA_PLAY_SOMETHING1;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_unlock(&chip->reg_lock);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 0);
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* now unmute WaveOut */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (!previously_muted)
|
|
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0);
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("STOPPED PLAYBACK\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
2006-05-17 05:02:24 -04:00
|
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
|
|
snd_azf3328_dbgplay("SUSPEND PLAYBACK\n");
|
|
|
|
/* make sure playback is stopped */
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
|
|
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) & ~DMA_RESUME);
|
|
|
|
break;
|
2005-04-16 18:20:36 -04:00
|
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
2005-10-20 12:26:44 -04:00
|
|
|
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
2005-10-20 12:26:44 -04:00
|
|
|
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
default:
|
2006-05-17 05:02:24 -04:00
|
|
|
printk(KERN_ERR "FIXME: unknown trigger mode!\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* this is just analogous to playback; I'm not quite sure whether recording
|
|
|
|
* should actually be triggered like that */
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
2005-04-16 18:20:36 -04:00
|
|
|
int result = 0;
|
|
|
|
unsigned int status1;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcalls("snd_azf3328_capture_trigger cmd %d\n", cmd);
|
2005-10-25 05:17:45 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
switch (cmd) {
|
|
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("START CAPTURE\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_setfmt(chip, IDX_IO_REC_SOUNDFORMAT,
|
2005-10-25 05:17:45 -04:00
|
|
|
runtime->rate,
|
|
|
|
snd_pcm_format_width(runtime->format),
|
|
|
|
runtime->channels);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
spin_lock(&chip->reg_lock);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* first, remember current value: */
|
2005-10-25 05:17:45 -04:00
|
|
|
status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
/* stop recording */
|
2005-04-16 18:20:36 -04:00
|
|
|
status1 &= ~DMA_RESUME;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* FIXME: clear interrupts or what??? */
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_IRQTYPE, 0xffff);
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_setdmaa(chip, runtime->dma_addr,
|
|
|
|
snd_pcm_lib_period_bytes(substream),
|
|
|
|
snd_pcm_lib_buffer_bytes(substream),
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
AZF_CAPTURE);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
#ifdef WIN9X
|
|
|
|
/* FIXME: enable playback/recording??? */
|
|
|
|
status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
/* start capture again */
|
2005-04-16 18:20:36 -04:00
|
|
|
/* FIXME: what is this value (0x0010)??? */
|
|
|
|
status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
#else
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
|
|
0x0000);
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
|
|
DMA_PLAY_SOMETHING1);
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
|
|
DMA_PLAY_SOMETHING1 |
|
|
|
|
DMA_PLAY_SOMETHING2);
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
|
|
DMA_RESUME |
|
|
|
|
SOMETHING_ALMOST_ALWAYS_SET |
|
|
|
|
DMA_EPILOGUE_SOMETHING |
|
|
|
|
DMA_SOMETHING_ELSE);
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
spin_unlock(&chip->reg_lock);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_activity(chip, AZF_CAPTURE, 1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("STARTED CAPTURE\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
2006-05-17 05:02:24 -04:00
|
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
|
|
snd_azf3328_dbgplay("RESUME CAPTURE\n");
|
|
|
|
/* resume recording if we were active */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
if (chip->audio_stream[AZF_CAPTURE].running)
|
2006-05-17 05:02:24 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
|
|
snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) | DMA_RESUME);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
spin_unlock(&chip->reg_lock);
|
2006-05-17 05:02:24 -04:00
|
|
|
break;
|
2005-04-16 18:20:36 -04:00
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("STOP CAPTURE\n");
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_lock(&chip->reg_lock);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* first, remember current value: */
|
2005-10-25 05:17:45 -04:00
|
|
|
status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* stop recording */
|
2005-04-16 18:20:36 -04:00
|
|
|
status1 &= ~DMA_RESUME;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
status1 |= DMA_PLAY_SOMETHING1;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
status1 &= ~DMA_PLAY_SOMETHING1;
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_unlock(&chip->reg_lock);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_activity(chip, AZF_CAPTURE, 0);
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("STOPPED CAPTURE\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
2006-05-17 05:02:24 -04:00
|
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
|
|
snd_azf3328_dbgplay("SUSPEND CAPTURE\n");
|
|
|
|
/* make sure recording is stopped */
|
|
|
|
snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
|
|
|
|
snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) & ~DMA_RESUME);
|
|
|
|
break;
|
2005-04-16 18:20:36 -04:00
|
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
2005-10-20 12:26:44 -04:00
|
|
|
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
2005-10-20 12:26:44 -04:00
|
|
|
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
default:
|
2006-05-17 05:02:24 -04:00
|
|
|
printk(KERN_ERR "FIXME: unknown trigger mode!\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static snd_pcm_uframes_t
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_playback_pointer(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
2005-10-25 05:17:45 -04:00
|
|
|
unsigned long bufptr, result;
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_pcm_uframes_t frmres;
|
|
|
|
|
|
|
|
#ifdef QUERY_HARDWARE
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
bufptr = snd_azf3328_codec_inl(chip, IDX_IO_PLAY_DMA_START_1);
|
2005-04-16 18:20:36 -04:00
|
|
|
#else
|
|
|
|
bufptr = substream->runtime->dma_addr;
|
|
|
|
#endif
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
result = snd_azf3328_codec_inl(chip, IDX_IO_PLAY_DMA_CURRPOS);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
/* calculate offset */
|
|
|
|
result -= bufptr;
|
|
|
|
frmres = bytes_to_frames( substream->runtime, result);
|
|
|
|
snd_azf3328_dbgplay("PLAY @ 0x%8lx, frames %8ld\n", result, frmres);
|
2005-04-16 18:20:36 -04:00
|
|
|
return frmres;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static snd_pcm_uframes_t
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_capture_pointer(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
2005-10-25 05:17:45 -04:00
|
|
|
unsigned long bufptr, result;
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_pcm_uframes_t frmres;
|
|
|
|
|
|
|
|
#ifdef QUERY_HARDWARE
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
bufptr = snd_azf3328_codec_inl(chip, IDX_IO_REC_DMA_START_1);
|
2005-04-16 18:20:36 -04:00
|
|
|
#else
|
|
|
|
bufptr = substream->runtime->dma_addr;
|
|
|
|
#endif
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
result = snd_azf3328_codec_inl(chip, IDX_IO_REC_DMA_CURRPOS);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
/* calculate offset */
|
|
|
|
result -= bufptr;
|
|
|
|
frmres = bytes_to_frames( substream->runtime, result);
|
|
|
|
snd_azf3328_dbgplay("REC @ 0x%8lx, frames %8ld\n", result, frmres);
|
2005-04-16 18:20:36 -04:00
|
|
|
return frmres;
|
|
|
|
}
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/******************************************************************/
|
|
|
|
|
|
|
|
#ifdef SUPPORT_GAMEPORT
|
|
|
|
static inline void
|
|
|
|
snd_azf3328_gameport_irq_enable(struct snd_azf3328 *chip, int enable)
|
|
|
|
{
|
|
|
|
snd_azf3328_io_reg_setb(
|
|
|
|
chip->game_io+IDX_GAME_HWCONFIG,
|
|
|
|
GAME_HWCFG_IRQ_ENABLE,
|
|
|
|
enable
|
|
|
|
);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
snd_azf3328_gameport_legacy_address_enable(struct snd_azf3328 *chip, int enable)
|
|
|
|
{
|
|
|
|
snd_azf3328_io_reg_setb(
|
|
|
|
chip->game_io+IDX_GAME_HWCONFIG,
|
|
|
|
GAME_HWCFG_LEGACY_ADDRESS_ENABLE,
|
|
|
|
enable
|
|
|
|
);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, int enable)
|
|
|
|
{
|
2008-06-23 05:50:47 -04:00
|
|
|
snd_azf3328_codec_reg_6AH_update(
|
|
|
|
chip, IO_6A_SOMETHING2_GAMEPORT, enable
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
snd_azf3328_gameport_interrupt(struct snd_azf3328 *chip)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* skeleton handler only
|
|
|
|
* (we do not want axis reading in interrupt handler - too much load!)
|
|
|
|
*/
|
|
|
|
snd_azf3328_dbggame("gameport irq\n");
|
|
|
|
|
|
|
|
/* this should ACK the gameport IRQ properly, hopefully. */
|
|
|
|
snd_azf3328_game_inw(chip, IDX_GAME_AXIS_VALUE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
snd_azf3328_gameport_open(struct gameport *gameport, int mode)
|
|
|
|
{
|
|
|
|
struct snd_azf3328 *chip = gameport_get_port_data(gameport);
|
|
|
|
int res;
|
|
|
|
|
|
|
|
snd_azf3328_dbggame("gameport_open, mode %d\n", mode);
|
|
|
|
switch (mode) {
|
|
|
|
case GAMEPORT_MODE_COOKED:
|
|
|
|
case GAMEPORT_MODE_RAW:
|
|
|
|
res = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
res = -1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
snd_azf3328_gameport_axis_circuit_enable(chip, (res == 0));
|
|
|
|
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
snd_azf3328_gameport_close(struct gameport *gameport)
|
|
|
|
{
|
|
|
|
struct snd_azf3328 *chip = gameport_get_port_data(gameport);
|
|
|
|
|
|
|
|
snd_azf3328_dbggame("gameport_close\n");
|
|
|
|
snd_azf3328_gameport_axis_circuit_enable(chip, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
snd_azf3328_gameport_cooked_read(struct gameport *gameport,
|
|
|
|
int *axes,
|
|
|
|
int *buttons
|
|
|
|
)
|
|
|
|
{
|
|
|
|
struct snd_azf3328 *chip = gameport_get_port_data(gameport);
|
|
|
|
int i;
|
|
|
|
u8 val;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
snd_assert(chip, return 0);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
val = snd_azf3328_game_inb(chip, IDX_GAME_LEGACY_COMPATIBLE);
|
|
|
|
*buttons = (~(val) >> 4) & 0xf;
|
|
|
|
|
|
|
|
/* ok, this one is a bit dirty: cooked_read is being polled by a timer,
|
|
|
|
* thus we're atomic and cannot actively wait in here
|
|
|
|
* (which would be useful for us since it probably would be better
|
|
|
|
* to trigger a measurement in here, then wait a short amount of
|
|
|
|
* time until it's finished, then read values of _this_ measurement).
|
|
|
|
*
|
|
|
|
* Thus we simply resort to reading values if they're available already
|
|
|
|
* and trigger the next measurement.
|
|
|
|
*/
|
|
|
|
|
|
|
|
val = snd_azf3328_game_inb(chip, IDX_GAME_AXES_CONFIG);
|
|
|
|
if (val & GAME_AXES_SAMPLING_READY) {
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
/* configure the axis to read */
|
|
|
|
val = (i << 4) | 0x0f;
|
|
|
|
snd_azf3328_game_outb(chip, IDX_GAME_AXES_CONFIG, val);
|
|
|
|
|
|
|
|
chip->axes[i] = snd_azf3328_game_inw(
|
|
|
|
chip, IDX_GAME_AXIS_VALUE
|
|
|
|
);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* trigger next axes sampling, to be evaluated the next time we
|
|
|
|
* enter this function */
|
|
|
|
|
|
|
|
/* for some very, very strange reason we cannot enable
|
|
|
|
* Measurement Ready monitoring for all axes here,
|
|
|
|
* at least not when only one joystick connected */
|
|
|
|
val = 0x03; /* we're able to monitor axes 1 and 2 only */
|
|
|
|
snd_azf3328_game_outb(chip, IDX_GAME_AXES_CONFIG, val);
|
|
|
|
|
|
|
|
snd_azf3328_game_outw(chip, IDX_GAME_AXIS_VALUE, 0xffff);
|
|
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
axes[i] = chip->axes[i];
|
|
|
|
if (axes[i] == 0xffff)
|
|
|
|
axes[i] = -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
snd_azf3328_dbggame("cooked_read: axes %d %d %d %d buttons %d\n",
|
|
|
|
axes[0], axes[1], axes[2], axes[3], *buttons
|
|
|
|
);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit
|
|
|
|
snd_azf3328_gameport(struct snd_azf3328 *chip, int dev)
|
|
|
|
{
|
|
|
|
struct gameport *gp;
|
|
|
|
|
|
|
|
chip->gameport = gp = gameport_allocate_port();
|
|
|
|
if (!gp) {
|
|
|
|
printk(KERN_ERR "azt3328: cannot alloc memory for gameport\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
gameport_set_name(gp, "AZF3328 Gameport");
|
|
|
|
gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci));
|
|
|
|
gameport_set_dev_parent(gp, &chip->pci->dev);
|
2008-06-23 05:50:47 -04:00
|
|
|
gp->io = chip->game_io;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
gameport_set_port_data(gp, chip);
|
|
|
|
|
|
|
|
gp->open = snd_azf3328_gameport_open;
|
|
|
|
gp->close = snd_azf3328_gameport_close;
|
|
|
|
gp->fuzz = 16; /* seems ok */
|
|
|
|
gp->cooked_read = snd_azf3328_gameport_cooked_read;
|
|
|
|
|
|
|
|
/* DISABLE legacy address: we don't need it! */
|
|
|
|
snd_azf3328_gameport_legacy_address_enable(chip, 0);
|
|
|
|
|
|
|
|
snd_azf3328_gameport_axis_circuit_enable(chip, 0);
|
|
|
|
|
|
|
|
gameport_register_port(chip->gameport);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
snd_azf3328_gameport_free(struct snd_azf3328 *chip)
|
|
|
|
{
|
|
|
|
if (chip->gameport) {
|
|
|
|
gameport_unregister_port(chip->gameport);
|
|
|
|
chip->gameport = NULL;
|
|
|
|
}
|
|
|
|
snd_azf3328_gameport_irq_enable(chip, 0);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline int
|
|
|
|
snd_azf3328_gameport(struct snd_azf3328 *chip, int dev) { return -ENOSYS; }
|
|
|
|
static inline void
|
|
|
|
snd_azf3328_gameport_free(struct snd_azf3328 *chip) { }
|
|
|
|
static inline void
|
|
|
|
snd_azf3328_gameport_interrupt(struct snd_azf3328 *chip)
|
|
|
|
{
|
|
|
|
printk(KERN_WARNING "huh, game port IRQ occurred!?\n");
|
|
|
|
}
|
|
|
|
#endif /* SUPPORT_GAMEPORT */
|
|
|
|
|
|
|
|
/******************************************************************/
|
|
|
|
|
2008-06-23 05:50:47 -04:00
|
|
|
static inline void
|
|
|
|
snd_azf3328_irq_log_unknown_type(u8 which)
|
|
|
|
{
|
|
|
|
snd_azf3328_dbgplay(
|
|
|
|
"azt3328: unknown IRQ type (%x) occurred, please report!\n",
|
|
|
|
which
|
|
|
|
);
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static irqreturn_t
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
snd_azf3328_interrupt(int irq, void *dev_id)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = dev_id;
|
2005-10-25 05:17:45 -04:00
|
|
|
u8 status, which;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#if DEBUG_PLAY_REC
|
2005-10-25 05:17:45 -04:00
|
|
|
static unsigned long irq_count;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
status = snd_azf3328_codec_inb(chip, IDX_IO_IRQSTATUS);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* fast path out, to ease interrupt sharing */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (!(status &
|
|
|
|
(IRQ_PLAYBACK|IRQ_RECORDING|IRQ_GAMEPORT|IRQ_MPU401|IRQ_TIMER)
|
|
|
|
))
|
2005-04-16 18:20:36 -04:00
|
|
|
return IRQ_NONE; /* must be interrupt for another device */
|
|
|
|
|
2008-06-23 05:50:47 -04:00
|
|
|
snd_azf3328_dbgplay(
|
|
|
|
"irq_count %ld! IDX_IO_PLAY_FLAGS %04x, "
|
|
|
|
"IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n",
|
|
|
|
irq_count++ /* debug-only */,
|
|
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS),
|
|
|
|
snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE),
|
|
|
|
status
|
|
|
|
);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2006-05-17 05:04:19 -04:00
|
|
|
if (status & IRQ_TIMER) {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* snd_azf3328_dbgplay("timer %ld\n",
|
|
|
|
snd_azf3328_codec_inl(chip, IDX_IO_TIMER_VALUE)
|
|
|
|
& TIMER_VALUE_MASK
|
|
|
|
); */
|
2005-10-25 05:17:45 -04:00
|
|
|
if (chip->timer)
|
|
|
|
snd_timer_interrupt(chip->timer, chip->timer->sticks);
|
|
|
|
/* ACK timer */
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07);
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
snd_azf3328_dbgplay("azt3328: timer IRQ\n");
|
|
|
|
}
|
2006-05-17 05:04:19 -04:00
|
|
|
if (status & IRQ_PLAYBACK) {
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_lock(&chip->reg_lock);
|
2005-10-25 05:17:45 -04:00
|
|
|
which = snd_azf3328_codec_inb(chip, IDX_IO_PLAY_IRQTYPE);
|
|
|
|
/* ack all IRQ types immediately */
|
|
|
|
snd_azf3328_codec_outb(chip, IDX_IO_PLAY_IRQTYPE, which);
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (chip->pcm && chip->audio_stream[AZF_PLAYBACK].substream) {
|
|
|
|
snd_pcm_period_elapsed(
|
|
|
|
chip->audio_stream[AZF_PLAYBACK].substream
|
|
|
|
);
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("PLAY period done (#%x), @ %x\n",
|
|
|
|
which,
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_inl(
|
|
|
|
chip, IDX_IO_PLAY_DMA_CURRPOS
|
|
|
|
)
|
|
|
|
);
|
2006-05-17 05:04:19 -04:00
|
|
|
} else
|
2008-06-23 05:50:47 -04:00
|
|
|
printk(KERN_WARNING "azt3328: irq handler problem!\n");
|
2005-10-25 05:17:45 -04:00
|
|
|
if (which & IRQ_PLAY_SOMETHING)
|
2008-06-23 05:50:47 -04:00
|
|
|
snd_azf3328_irq_log_unknown_type(which);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
2006-05-17 05:04:19 -04:00
|
|
|
if (status & IRQ_RECORDING) {
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_lock(&chip->reg_lock);
|
2005-10-25 05:17:45 -04:00
|
|
|
which = snd_azf3328_codec_inb(chip, IDX_IO_REC_IRQTYPE);
|
|
|
|
/* ack all IRQ types immediately */
|
|
|
|
snd_azf3328_codec_outb(chip, IDX_IO_REC_IRQTYPE, which);
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (chip->pcm && chip->audio_stream[AZF_CAPTURE].substream) {
|
|
|
|
snd_pcm_period_elapsed(
|
|
|
|
chip->audio_stream[AZF_CAPTURE].substream
|
|
|
|
);
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_dbgplay("REC period done (#%x), @ %x\n",
|
|
|
|
which,
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_codec_inl(
|
|
|
|
chip, IDX_IO_REC_DMA_CURRPOS
|
|
|
|
)
|
|
|
|
);
|
2006-05-17 05:04:19 -04:00
|
|
|
} else
|
2008-06-23 05:50:47 -04:00
|
|
|
printk(KERN_WARNING "azt3328: irq handler problem!\n");
|
2005-10-25 05:17:45 -04:00
|
|
|
if (which & IRQ_REC_SOMETHING)
|
2008-06-23 05:50:47 -04:00
|
|
|
snd_azf3328_irq_log_unknown_type(which);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (status & IRQ_GAMEPORT)
|
|
|
|
snd_azf3328_gameport_interrupt(chip);
|
2005-10-25 05:17:45 -04:00
|
|
|
/* MPU401 has less critical IRQ requirements
|
|
|
|
* than timer and playback/recording, right? */
|
2006-05-17 05:04:19 -04:00
|
|
|
if (status & IRQ_MPU401) {
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data);
|
2005-10-25 05:17:45 -04:00
|
|
|
|
|
|
|
/* hmm, do we have to ack the IRQ here somehow?
|
|
|
|
* If so, then I don't know how... */
|
|
|
|
snd_azf3328_dbgplay("azt3328: MPU401 IRQ\n");
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*****************************************************************/
|
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
static const struct snd_pcm_hardware snd_azf3328_playback =
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
/* FIXME!! Correct? */
|
2005-10-25 05:17:45 -04:00
|
|
|
.info = SNDRV_PCM_INFO_MMAP |
|
|
|
|
SNDRV_PCM_INFO_INTERLEAVED |
|
|
|
|
SNDRV_PCM_INFO_MMAP_VALID,
|
|
|
|
.formats = SNDRV_PCM_FMTBIT_S8 |
|
|
|
|
SNDRV_PCM_FMTBIT_U8 |
|
|
|
|
SNDRV_PCM_FMTBIT_S16_LE |
|
|
|
|
SNDRV_PCM_FMTBIT_U16_LE,
|
|
|
|
.rates = SNDRV_PCM_RATE_5512 |
|
|
|
|
SNDRV_PCM_RATE_8000_48000 |
|
|
|
|
SNDRV_PCM_RATE_KNOT,
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
.rate_min = AZF_FREQ_4000,
|
|
|
|
.rate_max = AZF_FREQ_66200,
|
2005-04-16 18:20:36 -04:00
|
|
|
.channels_min = 1,
|
|
|
|
.channels_max = 2,
|
|
|
|
.buffer_bytes_max = 65536,
|
|
|
|
.period_bytes_min = 64,
|
|
|
|
.period_bytes_max = 65536,
|
|
|
|
.periods_min = 1,
|
|
|
|
.periods_max = 1024,
|
|
|
|
/* FIXME: maybe that card actually has a FIFO?
|
|
|
|
* Hmm, it seems newer revisions do have one, but we still don't know
|
|
|
|
* its size... */
|
|
|
|
.fifo_size = 0,
|
|
|
|
};
|
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
static const struct snd_pcm_hardware snd_azf3328_capture =
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
/* FIXME */
|
2005-10-25 05:17:45 -04:00
|
|
|
.info = SNDRV_PCM_INFO_MMAP |
|
|
|
|
SNDRV_PCM_INFO_INTERLEAVED |
|
|
|
|
SNDRV_PCM_INFO_MMAP_VALID,
|
|
|
|
.formats = SNDRV_PCM_FMTBIT_S8 |
|
|
|
|
SNDRV_PCM_FMTBIT_U8 |
|
|
|
|
SNDRV_PCM_FMTBIT_S16_LE |
|
|
|
|
SNDRV_PCM_FMTBIT_U16_LE,
|
|
|
|
.rates = SNDRV_PCM_RATE_5512 |
|
|
|
|
SNDRV_PCM_RATE_8000_48000 |
|
|
|
|
SNDRV_PCM_RATE_KNOT,
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
.rate_min = AZF_FREQ_4000,
|
|
|
|
.rate_max = AZF_FREQ_66200,
|
2005-04-16 18:20:36 -04:00
|
|
|
.channels_min = 1,
|
|
|
|
.channels_max = 2,
|
|
|
|
.buffer_bytes_max = 65536,
|
|
|
|
.period_bytes_min = 64,
|
|
|
|
.period_bytes_max = 65536,
|
|
|
|
.periods_min = 1,
|
|
|
|
.periods_max = 1024,
|
|
|
|
.fifo_size = 0,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static unsigned int snd_azf3328_fixed_rates[] = {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
AZF_FREQ_4000,
|
|
|
|
AZF_FREQ_4800,
|
|
|
|
AZF_FREQ_5512,
|
|
|
|
AZF_FREQ_6620,
|
|
|
|
AZF_FREQ_8000,
|
|
|
|
AZF_FREQ_9600,
|
|
|
|
AZF_FREQ_11025,
|
|
|
|
AZF_FREQ_13240,
|
|
|
|
AZF_FREQ_16000,
|
|
|
|
AZF_FREQ_22050,
|
|
|
|
AZF_FREQ_32000,
|
|
|
|
AZF_FREQ_44100,
|
|
|
|
AZF_FREQ_48000,
|
|
|
|
AZF_FREQ_66200
|
|
|
|
};
|
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
static struct snd_pcm_hw_constraint_list snd_azf3328_hw_constraints_rates = {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
.count = ARRAY_SIZE(snd_azf3328_fixed_rates),
|
2005-04-16 18:20:36 -04:00
|
|
|
.list = snd_azf3328_fixed_rates,
|
|
|
|
.mask = 0,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*****************************************************************/
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_playback_open(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
chip->audio_stream[AZF_PLAYBACK].substream = substream;
|
2005-04-16 18:20:36 -04:00
|
|
|
runtime->hw = snd_azf3328_playback;
|
|
|
|
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
|
|
|
|
&snd_azf3328_hw_constraints_rates);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_capture_open(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
|
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
chip->audio_stream[AZF_CAPTURE].substream = substream;
|
2005-04-16 18:20:36 -04:00
|
|
|
runtime->hw = snd_azf3328_capture;
|
|
|
|
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
|
|
|
|
&snd_azf3328_hw_constraints_rates);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_playback_close(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
chip->audio_stream[AZF_PLAYBACK].substream = NULL;
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_capture_close(struct snd_pcm_substream *substream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
chip->audio_stream[AZF_CAPTURE].substream = NULL;
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/******************************************************************/
|
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
static struct snd_pcm_ops snd_azf3328_playback_ops = {
|
2005-04-16 18:20:36 -04:00
|
|
|
.open = snd_azf3328_playback_open,
|
|
|
|
.close = snd_azf3328_playback_close,
|
|
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
|
|
.hw_params = snd_azf3328_hw_params,
|
|
|
|
.hw_free = snd_azf3328_hw_free,
|
|
|
|
.prepare = snd_azf3328_playback_prepare,
|
|
|
|
.trigger = snd_azf3328_playback_trigger,
|
|
|
|
.pointer = snd_azf3328_playback_pointer
|
|
|
|
};
|
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
static struct snd_pcm_ops snd_azf3328_capture_ops = {
|
2005-04-16 18:20:36 -04:00
|
|
|
.open = snd_azf3328_capture_open,
|
|
|
|
.close = snd_azf3328_capture_close,
|
|
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
|
|
.hw_params = snd_azf3328_hw_params,
|
|
|
|
.hw_free = snd_azf3328_hw_free,
|
|
|
|
.prepare = snd_azf3328_capture_prepare,
|
|
|
|
.trigger = snd_azf3328_capture_trigger,
|
|
|
|
.pointer = snd_azf3328_capture_pointer
|
|
|
|
};
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int __devinit
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_pcm(struct snd_azf3328 *chip, int device)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_pcm *pcm;
|
2005-04-16 18:20:36 -04:00
|
|
|
int err;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
if ((err = snd_pcm_new(chip->card, "AZF3328 DSP", device, 1, 1, &pcm)) < 0)
|
|
|
|
return err;
|
|
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_azf3328_playback_ops);
|
|
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_azf3328_capture_ops);
|
|
|
|
|
|
|
|
pcm->private_data = chip;
|
|
|
|
pcm->info_flags = 0;
|
|
|
|
strcpy(pcm->name, chip->card->shortname);
|
|
|
|
chip->pcm = pcm;
|
|
|
|
|
|
|
|
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
|
|
|
snd_dma_pci_data(chip->pci), 64*1024, 64*1024);
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/******************************************************************/
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/*** NOTE: the physical timer resolution actually is 1024000 ticks per second
|
|
|
|
*** (probably derived from main crystal via a divider of 24),
|
2005-10-25 05:17:45 -04:00
|
|
|
*** but announcing those attributes to user-space would make programs
|
|
|
|
*** configure the timer to a 1 tick value, resulting in an absolutely fatal
|
|
|
|
*** timer IRQ storm.
|
|
|
|
*** Thus I chose to announce a down-scaled virtual timer to the outside and
|
|
|
|
*** calculate real timer countdown values internally.
|
|
|
|
*** (the scale factor can be set via module parameter "seqtimer_scaling").
|
|
|
|
***/
|
|
|
|
|
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_timer_start(struct snd_timer *timer)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip;
|
2005-10-25 05:17:45 -04:00
|
|
|
unsigned long flags;
|
|
|
|
unsigned int delay;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
chip = snd_timer_chip(timer);
|
|
|
|
delay = ((timer->sticks * seqtimer_scaling) - 1) & TIMER_VALUE_MASK;
|
2006-05-17 05:04:19 -04:00
|
|
|
if (delay < 49) {
|
2005-10-25 05:17:45 -04:00
|
|
|
/* uhoh, that's not good, since user-space won't know about
|
|
|
|
* this timing tweak
|
|
|
|
* (we need to do it to avoid a lockup, though) */
|
|
|
|
|
|
|
|
snd_azf3328_dbgtimer("delay was too low (%d)!\n", delay);
|
|
|
|
delay = 49; /* minimum time is 49 ticks */
|
|
|
|
}
|
|
|
|
snd_azf3328_dbgtimer("setting timer countdown value %d, add COUNTDOWN|IRQ\n", delay);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
delay |= TIMER_COUNTDOWN_ENABLE | TIMER_IRQ_ENABLE;
|
2005-10-25 05:17:45 -04:00
|
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
snd_azf3328_codec_outl(chip, IDX_IO_TIMER_VALUE, delay);
|
|
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_timer_stop(struct snd_timer *timer)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip;
|
2005-10-25 05:17:45 -04:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
chip = snd_timer_chip(timer);
|
|
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
/* disable timer countdown and interrupt */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* FIXME: should we write TIMER_IRQ_ACK here? */
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
|
|
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_timer_precise_resolution(struct snd_timer *timer,
|
2005-10-25 05:17:45 -04:00
|
|
|
unsigned long *num, unsigned long *den)
|
|
|
|
{
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
*num = 1;
|
|
|
|
*den = 1024000 / seqtimer_scaling;
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:02:42 -05:00
|
|
|
static struct snd_timer_hardware snd_azf3328_timer_hw = {
|
2005-10-25 05:17:45 -04:00
|
|
|
.flags = SNDRV_TIMER_HW_AUTO,
|
|
|
|
.resolution = 977, /* 1000000/1024000 = 0.9765625us */
|
|
|
|
.ticks = 1024000, /* max tick count, defined by the value register; actually it's not 1024000, but 1048576, but we don't care */
|
|
|
|
.start = snd_azf3328_timer_start,
|
|
|
|
.stop = snd_azf3328_timer_stop,
|
|
|
|
.precise_resolution = snd_azf3328_timer_precise_resolution,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __devinit
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_timer(struct snd_azf3328 *chip, int device)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_timer *timer = NULL;
|
|
|
|
struct snd_timer_id tid;
|
2005-10-25 05:17:45 -04:00
|
|
|
int err;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
tid.dev_class = SNDRV_TIMER_CLASS_CARD;
|
|
|
|
tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE;
|
|
|
|
tid.card = chip->card->number;
|
|
|
|
tid.device = device;
|
|
|
|
tid.subdevice = 0;
|
|
|
|
|
|
|
|
snd_azf3328_timer_hw.resolution *= seqtimer_scaling;
|
|
|
|
snd_azf3328_timer_hw.ticks /= seqtimer_scaling;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
err = snd_timer_new(chip->card, "AZF3328", &tid, &timer);
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out;
|
|
|
|
|
|
|
|
strcpy(timer->name, "AZF3328 timer");
|
|
|
|
timer->private_data = chip;
|
|
|
|
timer->hw = snd_azf3328_timer_hw;
|
|
|
|
|
|
|
|
chip->timer = timer;
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_timer_stop(timer);
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
err = 0;
|
|
|
|
|
|
|
|
out:
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
/******************************************************************/
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
static int
|
|
|
|
snd_azf3328_free(struct snd_azf3328 *chip)
|
|
|
|
{
|
|
|
|
if (chip->irq < 0)
|
|
|
|
goto __end_hw;
|
|
|
|
|
|
|
|
/* reset (close) mixer:
|
|
|
|
* first mute master volume, then reset
|
|
|
|
*/
|
|
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1);
|
|
|
|
snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000);
|
|
|
|
|
|
|
|
snd_azf3328_timer_stop(chip->timer);
|
|
|
|
snd_azf3328_gameport_free(chip);
|
|
|
|
|
|
|
|
if (chip->irq >= 0)
|
|
|
|
synchronize_irq(chip->irq);
|
|
|
|
__end_hw:
|
|
|
|
if (chip->irq >= 0)
|
|
|
|
free_irq(chip->irq, chip);
|
|
|
|
pci_release_regions(chip->pci);
|
|
|
|
pci_disable_device(chip->pci);
|
|
|
|
|
|
|
|
kfree(chip);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
snd_azf3328_dev_free(struct snd_device *device)
|
|
|
|
{
|
|
|
|
struct snd_azf3328 *chip = device->device_data;
|
|
|
|
return snd_azf3328_free(chip);
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
#if 0
|
|
|
|
/* check whether a bit can be modified */
|
2005-10-25 05:17:45 -04:00
|
|
|
static void
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_test_bit(unsigned unsigned reg, int bit)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
unsigned char val, valoff, valon;
|
|
|
|
|
|
|
|
val = inb(reg);
|
|
|
|
|
|
|
|
outb(val & ~(1 << bit), reg);
|
|
|
|
valoff = inb(reg);
|
|
|
|
|
|
|
|
outb(val|(1 << bit), reg);
|
|
|
|
valon = inb(reg);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
outb(val, reg);
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
printk(KERN_ERR "reg %04x bit %d: %02x %02x %02x\n",
|
|
|
|
reg, bit, val, valoff, valon
|
|
|
|
);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
static inline void
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip)
|
2005-10-25 05:17:45 -04:00
|
|
|
{
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#if DEBUG_MISC
|
2005-10-25 05:17:45 -04:00
|
|
|
u16 tmp;
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_dbgmisc(
|
|
|
|
"codec_io 0x%lx, game_io 0x%lx, mpu_io 0x%lx, "
|
|
|
|
"opl3_io 0x%lx, mixer_io 0x%lx, irq %d\n",
|
|
|
|
chip->codec_io, chip->game_io, chip->mpu_io,
|
|
|
|
chip->opl3_io, chip->mixer_io, chip->irq
|
|
|
|
);
|
|
|
|
|
|
|
|
snd_azf3328_dbgmisc("game %02x %02x %02x %02x %02x %02x\n",
|
|
|
|
snd_azf3328_game_inb(chip, 0),
|
|
|
|
snd_azf3328_game_inb(chip, 1),
|
|
|
|
snd_azf3328_game_inb(chip, 2),
|
|
|
|
snd_azf3328_game_inb(chip, 3),
|
|
|
|
snd_azf3328_game_inb(chip, 4),
|
|
|
|
snd_azf3328_game_inb(chip, 5)
|
|
|
|
);
|
|
|
|
|
|
|
|
for (tmp = 0; tmp < 0x07; tmp += 1)
|
|
|
|
snd_azf3328_dbgmisc("mpu_io 0x%04x\n", inb(chip->mpu_io + tmp));
|
|
|
|
|
|
|
|
for (tmp = 0; tmp <= 0x07; tmp += 1)
|
|
|
|
snd_azf3328_dbgmisc("0x%02x: game200 0x%04x, game208 0x%04x\n",
|
|
|
|
tmp, inb(0x200 + tmp), inb(0x208 + tmp));
|
|
|
|
|
|
|
|
for (tmp = 0; tmp <= 0x01; tmp += 1)
|
|
|
|
snd_azf3328_dbgmisc(
|
|
|
|
"0x%02x: mpu300 0x%04x, mpu310 0x%04x, mpu320 0x%04x, "
|
|
|
|
"mpu330 0x%04x opl388 0x%04x opl38c 0x%04x\n",
|
|
|
|
tmp,
|
|
|
|
inb(0x300 + tmp),
|
|
|
|
inb(0x310 + tmp),
|
|
|
|
inb(0x320 + tmp),
|
|
|
|
inb(0x330 + tmp),
|
|
|
|
inb(0x388 + tmp),
|
|
|
|
inb(0x38c + tmp)
|
|
|
|
);
|
2005-10-25 05:17:45 -04:00
|
|
|
|
2007-03-26 06:49:45 -04:00
|
|
|
for (tmp = 0; tmp < AZF_IO_SIZE_CODEC; tmp += 2)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_dbgmisc("codec 0x%02x: 0x%04x\n",
|
|
|
|
tmp, snd_azf3328_codec_inw(chip, tmp)
|
|
|
|
);
|
2007-03-26 06:49:45 -04:00
|
|
|
|
|
|
|
for (tmp = 0; tmp < AZF_IO_SIZE_MIXER; tmp += 2)
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_dbgmisc("mixer 0x%02x: 0x%04x\n",
|
|
|
|
tmp, snd_azf3328_mixer_inw(chip, tmp)
|
|
|
|
);
|
|
|
|
#endif /* DEBUG_MISC */
|
2005-10-25 05:17:45 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit
|
2005-11-17 09:02:42 -05:00
|
|
|
snd_azf3328_create(struct snd_card *card,
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
struct pci_dev *pci,
|
|
|
|
unsigned long device_type,
|
|
|
|
struct snd_azf3328 **rchip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_azf3328 *chip;
|
2005-04-16 18:20:36 -04:00
|
|
|
int err;
|
2005-11-17 09:02:42 -05:00
|
|
|
static struct snd_device_ops ops = {
|
2005-04-16 18:20:36 -04:00
|
|
|
.dev_free = snd_azf3328_dev_free,
|
|
|
|
};
|
|
|
|
u16 tmp;
|
|
|
|
|
|
|
|
*rchip = NULL;
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
err = pci_enable_device(pci);
|
|
|
|
if (err < 0)
|
2005-04-16 18:20:36 -04:00
|
|
|
return err;
|
|
|
|
|
[ALSA] Replace with kzalloc() - pci stuff
AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver
BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver
VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver
Replace kcalloc(1,..) with kzalloc().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-09 08:21:46 -04:00
|
|
|
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (chip == NULL) {
|
2005-10-25 05:17:45 -04:00
|
|
|
err = -ENOMEM;
|
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
spin_lock_init(&chip->reg_lock);
|
|
|
|
chip->card = card;
|
|
|
|
chip->pci = pci;
|
|
|
|
chip->irq = -1;
|
|
|
|
|
|
|
|
/* check if we can restrict PCI DMA transfers to 24 bits */
|
2006-03-28 04:56:48 -05:00
|
|
|
if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
|
|
|
|
pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_printk(KERN_ERR "architecture does not support "
|
|
|
|
"24bit PCI busmaster DMA\n"
|
|
|
|
);
|
2005-10-25 05:17:45 -04:00
|
|
|
err = -ENXIO;
|
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
err = pci_request_regions(pci, "Aztech AZF3328");
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
chip->codec_io = pci_resource_start(pci, 0);
|
|
|
|
chip->game_io = pci_resource_start(pci, 1);
|
|
|
|
chip->mpu_io = pci_resource_start(pci, 2);
|
|
|
|
chip->opl3_io = pci_resource_start(pci, 3);
|
|
|
|
chip->mixer_io = pci_resource_start(pci, 4);
|
|
|
|
|
|
|
|
chip->audio_stream[AZF_PLAYBACK].portbase = chip->codec_io + 0x00;
|
|
|
|
chip->audio_stream[AZF_CAPTURE].portbase = chip->codec_io + 0x20;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2006-11-21 06:14:23 -05:00
|
|
|
if (request_irq(pci->irq, snd_azf3328_interrupt,
|
|
|
|
IRQF_SHARED, card->shortname, chip)) {
|
2005-10-20 12:26:44 -04:00
|
|
|
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
|
2005-10-25 05:17:45 -04:00
|
|
|
err = -EBUSY;
|
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
chip->irq = pci->irq;
|
|
|
|
pci_set_master(pci);
|
|
|
|
synchronize_irq(chip->irq);
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_azf3328_debug_show_ports(chip);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* create mixer interface & switches */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
err = snd_azf3328_mixer_new(chip);
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* shutdown codecs to save power */
|
|
|
|
/* have snd_azf3328_codec_activity() act properly */
|
|
|
|
chip->audio_stream[AZF_PLAYBACK].running = 1;
|
|
|
|
snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 0);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* standard chip init stuff */
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* default IRQ init value */
|
2005-10-25 05:17:45 -04:00
|
|
|
tmp = DMA_PLAY_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
spin_lock_irq(&chip->reg_lock);
|
|
|
|
snd_azf3328_codec_outb(chip, IDX_IO_PLAY_FLAGS, tmp);
|
|
|
|
snd_azf3328_codec_outb(chip, IDX_IO_REC_FLAGS, tmp);
|
|
|
|
snd_azf3328_codec_outb(chip, IDX_IO_SOMETHING_FLAGS, tmp);
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_unlock_irq(&chip->reg_lock);
|
|
|
|
|
|
|
|
snd_card_set_dev(card, &pci->dev);
|
|
|
|
|
|
|
|
*rchip = chip;
|
2005-10-25 05:17:45 -04:00
|
|
|
|
|
|
|
err = 0;
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
out_err:
|
|
|
|
if (chip)
|
|
|
|
snd_azf3328_free(chip);
|
|
|
|
pci_disable_device(pci);
|
|
|
|
|
|
|
|
out:
|
|
|
|
return err;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int __devinit
|
|
|
|
snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
static int dev;
|
2005-11-17 09:02:42 -05:00
|
|
|
struct snd_card *card;
|
|
|
|
struct snd_azf3328 *chip;
|
|
|
|
struct snd_opl3 *opl3;
|
2005-04-16 18:20:36 -04:00
|
|
|
int err;
|
|
|
|
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
if (dev >= SNDRV_CARDS)
|
|
|
|
return -ENODEV;
|
|
|
|
if (!enable[dev]) {
|
|
|
|
dev++;
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (card == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
strcpy(card->driver, "AZF3328");
|
|
|
|
strcpy(card->shortname, "Aztech AZF3328 (PCI168)");
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
err = snd_azf3328_create(card, pci, pci_id->driver_data, &chip);
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2006-05-17 05:02:24 -04:00
|
|
|
card->private_data = chip;
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
err = snd_mpu401_uart_new(
|
|
|
|
card, 0, MPU401_HW_MPU401, chip->mpu_io, MPU401_INFO_INTEGRATED,
|
|
|
|
pci->irq, 0, &chip->rmidi
|
|
|
|
);
|
|
|
|
if (err < 0) {
|
|
|
|
snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n",
|
|
|
|
chip->mpu_io
|
|
|
|
);
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
|
|
|
}
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
err = snd_azf3328_timer(chip, 0);
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
err = snd_azf3328_pcm(chip, 0);
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
if (snd_opl3_create(card, chip->opl3_io, chip->opl3_io+2,
|
2005-04-16 18:20:36 -04:00
|
|
|
OPL3_HW_AUTO, 1, &opl3) < 0) {
|
2005-10-20 12:26:44 -04:00
|
|
|
snd_printk(KERN_ERR "azf3328: no OPL3 device at 0x%lx-0x%lx?\n",
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
chip->opl3_io, chip->opl3_io+2
|
|
|
|
);
|
2005-04-16 18:20:36 -04:00
|
|
|
} else {
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
/* need to use IDs 1, 2 since ID 0 is snd_azf3328_timer above */
|
|
|
|
err = snd_opl3_timer_new(opl3, 1, 2);
|
|
|
|
if (err < 0)
|
|
|
|
goto out_err;
|
|
|
|
err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2006-05-17 05:02:24 -04:00
|
|
|
opl3->private_data = chip;
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
sprintf(card->longname, "%s at 0x%lx, irq %i",
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
card->shortname, chip->codec_io, chip->irq);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
err = snd_card_register(card);
|
|
|
|
if (err < 0)
|
2005-10-25 05:17:45 -04:00
|
|
|
goto out_err;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
printk(
|
2007-03-26 06:49:45 -04:00
|
|
|
"azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168.\n"
|
|
|
|
"azt3328: Hardware was completely undocumented, unfortunately.\n"
|
2005-10-25 05:17:45 -04:00
|
|
|
"azt3328: Feel free to contact andi AT lisas.de for bug reports etc.!\n"
|
|
|
|
"azt3328: User-scalable sequencer timer set to %dHz (1024000Hz / %d).\n",
|
|
|
|
1024000 / seqtimer_scaling, seqtimer_scaling);
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_azf3328_gameport(chip, dev);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
pci_set_drvdata(pci, card);
|
|
|
|
dev++;
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
err = 0;
|
|
|
|
goto out;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
out_err:
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
snd_printk(KERN_ERR "azf3328: something failed, exiting\n");
|
2005-10-25 05:17:45 -04:00
|
|
|
snd_card_free(card);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
out:
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
2005-10-25 05:17:45 -04:00
|
|
|
return err;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static void __devexit
|
|
|
|
snd_azf3328_remove(struct pci_dev *pci)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
snd_card_free(pci_get_drvdata(pci));
|
|
|
|
pci_set_drvdata(pci, NULL);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
}
|
|
|
|
|
2006-05-17 05:02:24 -04:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int
|
|
|
|
snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state)
|
|
|
|
{
|
|
|
|
struct snd_card *card = pci_get_drvdata(pci);
|
|
|
|
struct snd_azf3328 *chip = card->private_data;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
unsigned reg;
|
2006-05-17 05:02:24 -04:00
|
|
|
|
|
|
|
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
2006-05-17 05:02:24 -04:00
|
|
|
snd_pcm_suspend_all(chip->pcm);
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; ++reg)
|
|
|
|
chip->saved_regs_mixer[reg] = inw(chip->mixer_io + reg * 2);
|
2006-05-17 05:02:24 -04:00
|
|
|
|
|
|
|
/* make sure to disable master volume etc. to prevent looping sound */
|
|
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1);
|
|
|
|
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg)
|
|
|
|
chip->saved_regs_codec[reg] = inw(chip->codec_io + reg * 2);
|
2008-06-23 05:50:47 -04:00
|
|
|
|
|
|
|
/* manually store the one currently relevant write-only reg, too */
|
|
|
|
chip->saved_regs_codec[IDX_IO_6AH / 2] = chip->shadow_reg_codec_6AH;
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg)
|
|
|
|
chip->saved_regs_game[reg] = inw(chip->game_io + reg * 2);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg)
|
|
|
|
chip->saved_regs_mpu[reg] = inw(chip->mpu_io + reg * 2);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_OPL3_PM / 2; ++reg)
|
|
|
|
chip->saved_regs_opl3[reg] = inw(chip->opl3_io + reg * 2);
|
2006-05-17 05:02:24 -04:00
|
|
|
|
|
|
|
pci_disable_device(pci);
|
|
|
|
pci_save_state(pci);
|
2006-10-11 12:52:53 -04:00
|
|
|
pci_set_power_state(pci, pci_choose_state(pci, state));
|
2006-05-17 05:02:24 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
snd_azf3328_resume(struct pci_dev *pci)
|
|
|
|
{
|
|
|
|
struct snd_card *card = pci_get_drvdata(pci);
|
|
|
|
struct snd_azf3328 *chip = card->private_data;
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
unsigned reg;
|
2006-05-17 05:02:24 -04:00
|
|
|
|
|
|
|
pci_set_power_state(pci, PCI_D0);
|
2006-10-11 12:52:53 -04:00
|
|
|
pci_restore_state(pci);
|
|
|
|
if (pci_enable_device(pci) < 0) {
|
|
|
|
printk(KERN_ERR "azt3328: pci_enable_device failed, "
|
|
|
|
"disabling device\n");
|
|
|
|
snd_card_disconnect(card);
|
|
|
|
return -EIO;
|
|
|
|
}
|
2006-05-17 05:02:24 -04:00
|
|
|
pci_set_master(pci);
|
|
|
|
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg)
|
|
|
|
outw(chip->saved_regs_game[reg], chip->game_io + reg * 2);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg)
|
|
|
|
outw(chip->saved_regs_mpu[reg], chip->mpu_io + reg * 2);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_OPL3_PM / 2; ++reg)
|
|
|
|
outw(chip->saved_regs_opl3[reg], chip->opl3_io + reg * 2);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; ++reg)
|
|
|
|
outw(chip->saved_regs_mixer[reg], chip->mixer_io + reg * 2);
|
|
|
|
for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg)
|
|
|
|
outw(chip->saved_regs_codec[reg], chip->codec_io + reg * 2);
|
2006-05-17 05:02:24 -04:00
|
|
|
|
|
|
|
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
|
|
|
|
return 0;
|
|
|
|
}
|
[ALSA] PCI168 snd-azt3328 Linux driver: another huge update
- figured out 'Digital(ly) Enhanced Game Port' functionality,
implemented support for it (eliminating gameport polling overhead)
- removed optional joystick activation, gameport now enabled unconditionally,
since we now support it via the PCI I/O space, not via conflict-prone
legacy I/O (which I was thus able to DISABLE now)!
- fix playback bug (a muted wave output would get unmuted upon start of
playback, of course this is not what we want, thus remember mute state)
- implement partial power management: when idle, lower clock rate and disable
codec (reduced noise!), and disable gameport circuit when unused
- instantiate OPL3 timer, too
- much better implementation of snd_azf3328_mixer_write_volume_gradually()
- slightly optimized interrupt handling
- lots of cleanup
This time, I also found a way to verify proper OPL3 operation
via MIDI file playback (emulation via synth hardware).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-16 06:18:29 -04:00
|
|
|
#endif /* CONFIG_PM */
|
2006-05-17 05:02:24 -04:00
|
|
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
static struct pci_driver driver = {
|
|
|
|
.name = "AZF3328",
|
|
|
|
.id_table = snd_azf3328_ids,
|
|
|
|
.probe = snd_azf3328_probe,
|
|
|
|
.remove = __devexit_p(snd_azf3328_remove),
|
2006-05-17 05:02:24 -04:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
.suspend = snd_azf3328_suspend,
|
|
|
|
.resume = snd_azf3328_resume,
|
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static int __init
|
|
|
|
alsa_card_azf3328_init(void)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
int err;
|
|
|
|
snd_azf3328_dbgcallenter();
|
[ALSA] Replace pci_module_init() with pci_register_driver()
Documentation,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
ALI5451 driver,au88x0 driver,CA0106 driver,CS46xx driver
EMU10K1/EMU10K2 driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,RME HDSP driver
RME9652 driver,Trident driver,Digigram VX222 driver,YMFPCI driver
Replace the obsolete pci_module_init() with pci_register_driver().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-04-11 10:58:24 -04:00
|
|
|
err = pci_register_driver(&driver);
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2005-10-25 05:17:45 -04:00
|
|
|
static void __exit
|
|
|
|
alsa_card_azf3328_exit(void)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
snd_azf3328_dbgcallenter();
|
|
|
|
pci_unregister_driver(&driver);
|
|
|
|
snd_azf3328_dbgcallleave();
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(alsa_card_azf3328_init)
|
|
|
|
module_exit(alsa_card_azf3328_exit)
|