lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
6fd60fa97b
android_kernel_xiaomi_sm8350/Documentation/networking/sis900.txt

258 lines
9.6 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
SiS 900/7016 Fast Ethernet Device Driver
Ollie Lho
Lei Chun Chang
Copyright <20> 1999 by Silicon Integrated System Corp.
This document gives some information on installation and usage of SiS
900/7016 device driver under Linux.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at
your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
USA
_________________________________________________________________
Table of Contents
1. Introduction
2. Changes
3. Tested Environment
4. Files in This Package
5. Installation
Building the driver as loadable module
Building the driver into kernel
6. Known Problems and Bugs
7. Revision History
8. Acknowledgements
_________________________________________________________________
Chapter 1. Introduction
This document describes the revision 1.06 and 1.07 of SiS 900/7016
Fast Ethernet device driver under Linux. The driver is developed by
Silicon Integrated System Corp. and distributed freely under the GNU
General Public License (GPL). The driver can be compiled as a loadable
module and used under Linux kernel version 2.2.x. (rev. 1.06) With
minimal changes, the driver can also be used under 2.3.x and 2.4.x
kernel (rev. 1.07), please see Chapter 5. If you are intended to use
the driver for earlier kernels, you are on your own.
The driver is tested with usual TCP/IP applications including FTP,
Telnet, Netscape etc. and is used constantly by the developers.
Please send all comments/fixes/questions to Lei-Chun Chang.
_________________________________________________________________
Chapter 2. Changes
Changes made in Revision 1.07
1. Separation of sis900.c and sis900.h in order to move most constant
definition to sis900.h (many of those constants were corrected)
2. Clean up PCI detection, the pci-scan from Donald Becker were not
used, just simple pci_find_*.
3. MII detection is modified to support multiple mii transceiver.
4. Bugs in read_eeprom, mdio_* were removed.
5. Lot of sis900 irrelevant comments were removed/changed and more
comments were added to reflect the real situation.
6. Clean up of physical/virtual address space mess in buffer
descriptors.
7. Better transmit/receive error handling.
8. The driver now uses zero-copy single buffer management scheme to
improve performance.
9. Names of variables were changed to be more consistent.
10. Clean up of auo-negotiation and timer code.
11. Automatic detection and change of PHY on the fly.
12. Bug in mac probing fixed.
13. Fix 630E equalier problem by modifying the equalizer workaround
rule.
14. Support for ICS1893 10/100 Interated PHYceiver.
15. Support for media select by ifconfig.
16. Added kernel-doc extratable documentation.
_________________________________________________________________
Chapter 3. Tested Environment
This driver is developed on the following hardware
* Intel Celeron 500 with SiS 630 (rev 02) chipset
* SiS 900 (rev 01) and SiS 7016/7014 Fast Ethernet Card
and tested with these software environments
* Red Hat Linux version 6.2
* Linux kernel version 2.4.0
* Netscape version 4.6
* NcFTP 3.0.0 beta 18
* Samba version 2.0.3
_________________________________________________________________
Chapter 4. Files in This Package
In the package you can find these files:
sis900.c
Driver source file in C
sis900.h
Header file for sis900.c
sis900.sgml
DocBook SGML source of the document
sis900.txt
Driver document in plain text
_________________________________________________________________
Chapter 5. Installation
Silicon Integrated System Corp. is cooperating closely with core Linux
Kernel developers. The revisions of SiS 900 driver are distributed by
the usuall channels for kernel tar files and patches. Those kernel tar
files for official kernel and patches for kernel pre-release can be
download at official kernel ftp site and its mirrors. The 1.06
revision can be found in kernel version later than 2.3.15 and
pre-2.2.14, and 1.07 revision can be found in kernel version 2.4.0. If
you have no prior experience in networking under Linux, please read
Ethernet HOWTO and Networking HOWTO available from Linux Documentation
Project (LDP).
The driver is bundled in release later than 2.2.11 and 2.3.15 so this
is the most easy case. Be sure you have the appropriate packages for
compiling kernel source. Those packages are listed in Document/Changes
in kernel source distribution. If you have to install the driver other
than those bundled in kernel release, you should have your driver file
sis900.c and sis900.h copied into /usr/src/linux/drivers/net/ first.
There are two alternative ways to install the driver
_________________________________________________________________
Building the driver as loadable module
To build the driver as a loadable kernel module you have to
reconfigure the kernel to activate network support by
make menuconfig
Choose "Loadable module support --->", then select "Enable loadable
module support".
Choose "Network Device Support --->", select "Ethernet (10 or
100Mbit)". Then select "EISA, VLB, PCI and on board controllers", and
choose "SiS 900/7016 PCI Fast Ethernet Adapter support" to "M".
After reconfiguring the kernel, you can make the driver module by
make modules
The driver should be compiled with no errors. After compiling the
driver, the driver can be installed to proper place by
make modules_install
Load the driver into kernel by
insmod sis900
When loading the driver into memory, some information message can be
view by
dmesg
or
cat /var/log/message
If the driver is loaded properly you will have messages similar to
this:
sis900.c: v1.07.06 11/07/2000
eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 10, 00:00:e8:83:7f:a4.
eth0: SiS 900 Internal MII PHY transceiver found at address 1.
eth0: Using SiS 900 Internal MII PHY as default
showing the version of the driver and the results of probing routine.
Once the driver is loaded, network can be brought up by
/sbin/ifconfig eth0 IPADDR broadcast BROADCAST netmask NETMASK media TYPE
where IPADDR, BROADCAST, NETMASK are your IP address, broadcast
address and netmask respectively. TYPE is used to set medium type used
by the device. Typical values are "10baseT"(twisted-pair 10Mbps
Ethernet) or "100baseT" (twisted-pair 100Mbps Ethernet). For more
information on how to configure network interface, please refer to
Networking HOWTO.
The link status is also shown by kernel messages. For example, after
the network interface is activated, you may have the message:
eth0: Media Link On 100mbps full-duplex
If you try to unplug the twist pair (TP) cable you will get
eth0: Media Link Off
indicating that the link is failed.
_________________________________________________________________
Building the driver into kernel
If you want to make the driver into kernel, choose "Y" rather than "M"
on "SiS 900/7016 PCI Fast Ethernet Adapter support" when configuring
the kernel. Build the kernel image in the usual way
make clean
make bzlilo
Next time the system reboot, you have the driver in memory.
_________________________________________________________________
Chapter 6. Known Problems and Bugs
There are some known problems and bugs. If you find any other bugs
please mail to lcchang@sis.com.tw
1. AM79C901 HomePNA PHY is not thoroughly tested, there may be some
bugs in the "on the fly" change of transceiver.
2. A bug is hidden somewhere in the receive buffer management code,
the bug causes NULL pointer reference in the kernel. This fault is
caught before bad things happen and reported with the message:
eth0: NULL pointer encountered in Rx ring, skipping which can be
viewed with dmesg or cat /var/log/message.
3. The media type change from 10Mbps to 100Mbps twisted-pair ethernet
by ifconfig causes the media link down.
_________________________________________________________________
Chapter 7. Revision History
* November 13, 2000, Revision 1.07, seventh release, 630E problem
fixed and further clean up.
* November 4, 1999, Revision 1.06, Second release, lots of clean up
and optimization.
* August 8, 1999, Revision 1.05, Initial Public Release
_________________________________________________________________
Chapter 8. Acknowledgements
This driver was originally derived form Donald Becker's pci-skeleton
and rtl8139 drivers. Donald also provided various suggestion regarded
with improvements made in revision 1.06.
The 1.05 revision was created by Jim Huang, AMD 79c901 support was
added by Chin-Shan Li.
Reference in New Issue Copy Permalink