[ARM] add Marvell Kirkwood (88F6000) SoC support
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a
Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface,
a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS
interface, and IDMA/XOR engines, and depending on the model, also
features one or two Gigabit Ethernet interfaces, two SATA II
interfaces, one or two TWSI interfaces, one or two UARTs, a
TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and
an SDIO interface.
This patch adds supports for the Marvell DB-88F6281-BP Development
Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs,
enabling support for the PCIe interface, the USB interface, the
ethernet interfaces, the SATA interfaces, the TWSI interfaces, the
UARTs, and the NAND controller.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 16:45:06 -04:00
|
|
|
/*
|
|
|
|
* arch/arm/mach-kirkwood/pcie.c
|
|
|
|
*
|
|
|
|
* PCIe functions for Marvell Kirkwood SoCs
|
|
|
|
*
|
|
|
|
* This file is licensed under the terms of the GNU General Public
|
|
|
|
* License version 2. This program is licensed "as is" without any
|
|
|
|
* warranty of any kind, whether express or implied.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/mbus.h>
|
2009-01-06 22:47:02 -05:00
|
|
|
#include <asm/irq.h>
|
[ARM] add Marvell Kirkwood (88F6000) SoC support
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a
Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface,
a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS
interface, and IDMA/XOR engines, and depending on the model, also
features one or two Gigabit Ethernet interfaces, two SATA II
interfaces, one or two TWSI interfaces, one or two UARTs, a
TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and
an SDIO interface.
This patch adds supports for the Marvell DB-88F6281-BP Development
Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs,
enabling support for the PCIe interface, the USB interface, the
ethernet interfaces, the SATA interfaces, the TWSI interfaces, the
UARTs, and the NAND controller.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 16:45:06 -04:00
|
|
|
#include <asm/mach/pci.h>
|
2008-08-09 07:44:58 -04:00
|
|
|
#include <plat/pcie.h>
|
[ARM] add Marvell Kirkwood (88F6000) SoC support
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a
Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface,
a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS
interface, and IDMA/XOR engines, and depending on the model, also
features one or two Gigabit Ethernet interfaces, two SATA II
interfaces, one or two TWSI interfaces, one or two UARTs, a
TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and
an SDIO interface.
This patch adds supports for the Marvell DB-88F6281-BP Development
Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs,
enabling support for the PCIe interface, the USB interface, the
ethernet interfaces, the SATA interfaces, the TWSI interfaces, the
UARTs, and the NAND controller.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 16:45:06 -04:00
|
|
|
#include "common.h"
|
|
|
|
|
|
|
|
|
|
|
|
#define PCIE_BASE ((void __iomem *)PCIE_VIRT_BASE)
|
|
|
|
|
2008-09-15 03:40:35 -04:00
|
|
|
void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
|
|
|
|
{
|
|
|
|
*dev = orion_pcie_dev_id(PCIE_BASE);
|
|
|
|
*rev = orion_pcie_rev(PCIE_BASE);
|
|
|
|
}
|
|
|
|
|
[ARM] add Marvell Kirkwood (88F6000) SoC support
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a
Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface,
a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS
interface, and IDMA/XOR engines, and depending on the model, also
features one or two Gigabit Ethernet interfaces, two SATA II
interfaces, one or two TWSI interfaces, one or two UARTs, a
TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and
an SDIO interface.
This patch adds supports for the Marvell DB-88F6281-BP Development
Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs,
enabling support for the PCIe interface, the USB interface, the
ethernet interfaces, the SATA interfaces, the TWSI interfaces, the
UARTs, and the NAND controller.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 16:45:06 -04:00
|
|
|
static int pcie_valid_config(int bus, int dev)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Don't go out when trying to access --
|
|
|
|
* 1. nonexisting device on local bus
|
|
|
|
* 2. where there's no device connected (no link)
|
|
|
|
*/
|
|
|
|
if (bus == 0 && dev == 0)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
if (!orion_pcie_link_up(PCIE_BASE))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (bus == 0 && dev != 1)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCIe config cycles are done by programming the PCIE_CONF_ADDR register
|
|
|
|
* and then reading the PCIE_CONF_DATA register. Need to make sure these
|
|
|
|
* transactions are atomic.
|
|
|
|
*/
|
|
|
|
static DEFINE_SPINLOCK(kirkwood_pcie_lock);
|
|
|
|
|
|
|
|
static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
|
|
|
|
int size, u32 *val)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
|
|
|
|
*val = 0xffffffff;
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&kirkwood_pcie_lock, flags);
|
|
|
|
ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
|
|
|
|
spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
|
|
|
|
int where, int size, u32 val)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&kirkwood_pcie_lock, flags);
|
|
|
|
ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
|
|
|
|
spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pci_ops pcie_ops = {
|
|
|
|
.read = pcie_rd_conf,
|
|
|
|
.write = pcie_wr_conf,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
|
|
|
|
{
|
|
|
|
struct resource *res;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Generic PCIe unit setup.
|
|
|
|
*/
|
|
|
|
orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Request resources.
|
|
|
|
*/
|
|
|
|
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
|
|
|
if (!res)
|
|
|
|
panic("pcie_setup unable to alloc resources");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IORESOURCE_IO
|
|
|
|
*/
|
|
|
|
res[0].name = "PCIe I/O Space";
|
|
|
|
res[0].flags = IORESOURCE_IO;
|
|
|
|
res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
|
|
|
|
res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
|
|
|
|
if (request_resource(&ioport_resource, &res[0]))
|
|
|
|
panic("Request PCIe IO resource failed\n");
|
|
|
|
sys->resource[0] = &res[0];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IORESOURCE_MEM
|
|
|
|
*/
|
|
|
|
res[1].name = "PCIe Memory Space";
|
|
|
|
res[1].flags = IORESOURCE_MEM;
|
|
|
|
res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
|
|
|
|
res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
|
|
|
|
if (request_resource(&iomem_resource, &res[1]))
|
|
|
|
panic("Request PCIe Memory resource failed\n");
|
|
|
|
sys->resource[1] = &res[1];
|
|
|
|
|
|
|
|
sys->resource[2] = NULL;
|
|
|
|
sys->io_offset = 0;
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __devinit rc_pci_fixup(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Prevent enumeration of root complex.
|
|
|
|
*/
|
|
|
|
if (dev->bus->parent == NULL && dev->devfn == 0) {
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
|
|
|
dev->resource[i].start = 0;
|
|
|
|
dev->resource[i].end = 0;
|
|
|
|
dev->resource[i].flags = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
|
|
|
|
|
|
|
|
static struct pci_bus __init *
|
|
|
|
kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
|
|
|
|
{
|
|
|
|
struct pci_bus *bus;
|
|
|
|
|
|
|
|
if (nr == 0) {
|
|
|
|
bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
|
|
|
|
} else {
|
|
|
|
bus = NULL;
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
|
|
|
|
return bus;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
|
|
{
|
|
|
|
return IRQ_KIRKWOOD_PCIE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct hw_pci kirkwood_pci __initdata = {
|
|
|
|
.nr_controllers = 1,
|
|
|
|
.swizzle = pci_std_swizzle,
|
|
|
|
.setup = kirkwood_pcie_setup,
|
|
|
|
.scan = kirkwood_pcie_scan_bus,
|
|
|
|
.map_irq = kirkwood_pcie_map_irq,
|
|
|
|
};
|
|
|
|
|
|
|
|
void __init kirkwood_pcie_init(void)
|
|
|
|
{
|
|
|
|
pci_common_init(&kirkwood_pci);
|
|
|
|
}
|