2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* PMac DBDMA lowlevel functions
|
|
|
|
*
|
|
|
|
* Copyright (c) by Takashi Iwai <tiwai@suse.de>
|
|
|
|
* code based on dmasound.c.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/interrupt.h>
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
2005-04-16 18:20:36 -04:00
|
|
|
#include <sound/core.h>
|
|
|
|
#include "pmac.h"
|
|
|
|
#include <sound/pcm_params.h>
|
|
|
|
#include <asm/pmac_feature.h>
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
#include <asm/pci-bridge.h>
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
|
|
|
/* fixed frequency table for awacs, screamer, burgundy, DACA (44100 max) */
|
|
|
|
static int awacs_freqs[8] = {
|
|
|
|
44100, 29400, 22050, 17640, 14700, 11025, 8820, 7350
|
|
|
|
};
|
|
|
|
/* fixed frequency table for tumbler */
|
|
|
|
static int tumbler_freqs[1] = {
|
|
|
|
44100
|
|
|
|
};
|
|
|
|
|
2008-01-16 09:57:08 -05:00
|
|
|
|
|
|
|
/*
|
|
|
|
* we will allocate a single 'emergency' dbdma cmd block to use if the
|
|
|
|
* tx status comes up "DEAD". This happens on some PowerComputing Pmac
|
|
|
|
* clones, either owing to a bug in dbdma or some interaction between
|
|
|
|
* IDE and sound. However, this measure would deal with DEAD status if
|
|
|
|
* it appeared elsewhere.
|
|
|
|
*/
|
|
|
|
static struct pmac_dbdma emergency_dbdma;
|
|
|
|
static int emergency_in_use;
|
|
|
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* allocate DBDMA command arrays
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_dbdma_alloc(struct snd_pmac *chip, struct pmac_dbdma *rec, int size)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
unsigned int rsize = sizeof(struct dbdma_cmd) * (size + 1);
|
|
|
|
|
|
|
|
rec->space = dma_alloc_coherent(&chip->pdev->dev, rsize,
|
|
|
|
&rec->dma_base, GFP_KERNEL);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (rec->space == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
rec->size = size;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
memset(rec->space, 0, rsize);
|
2005-04-16 18:20:36 -04:00
|
|
|
rec->cmds = (void __iomem *)DBDMA_ALIGN(rec->space);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
rec->addr = rec->dma_base + (unsigned long)((char *)rec->cmds - (char *)rec->space);
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static void snd_pmac_dbdma_free(struct snd_pmac *chip, struct pmac_dbdma *rec)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2006-02-07 23:04:18 -05:00
|
|
|
if (rec->space) {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
unsigned int rsize = sizeof(struct dbdma_cmd) * (rec->size + 1);
|
|
|
|
|
|
|
|
dma_free_coherent(&chip->pdev->dev, rsize, rec->space, rec->dma_base);
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* pcm stuff
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* look up frequency table
|
|
|
|
*/
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
unsigned int snd_pmac_rate_index(struct snd_pmac *chip, struct pmac_stream *rec, unsigned int rate)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
int i, ok, found;
|
|
|
|
|
|
|
|
ok = rec->cur_freqs;
|
|
|
|
if (rate > chip->freq_table[0])
|
|
|
|
return 0;
|
|
|
|
found = 0;
|
|
|
|
for (i = 0; i < chip->num_freqs; i++, ok >>= 1) {
|
|
|
|
if (! (ok & 1)) continue;
|
|
|
|
found = i;
|
|
|
|
if (rate >= chip->freq_table[i])
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return found;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* check whether another stream is active
|
|
|
|
*/
|
|
|
|
static inline int another_stream(int stream)
|
|
|
|
{
|
|
|
|
return (stream == SNDRV_PCM_STREAM_PLAYBACK) ?
|
|
|
|
SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* allocate buffers
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_pcm_hw_params(struct snd_pcm_substream *subs,
|
|
|
|
struct snd_pcm_hw_params *hw_params)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
return snd_pcm_lib_malloc_pages(subs, params_buffer_bytes(hw_params));
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* release buffers
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_pcm_hw_free(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
snd_pcm_lib_free_pages(subs);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* get a stream of the opposite direction
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static struct pmac_stream *snd_pmac_get_stream(struct snd_pmac *chip, int stream)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
switch (stream) {
|
|
|
|
case SNDRV_PCM_STREAM_PLAYBACK:
|
|
|
|
return &chip->playback;
|
|
|
|
case SNDRV_PCM_STREAM_CAPTURE:
|
|
|
|
return &chip->capture;
|
|
|
|
default:
|
|
|
|
snd_BUG();
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* wait while run status is on
|
|
|
|
*/
|
2005-07-27 14:46:09 -04:00
|
|
|
static inline void
|
2005-11-17 09:09:46 -05:00
|
|
|
snd_pmac_wait_ack(struct pmac_stream *rec)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
int timeout = 50000;
|
|
|
|
while ((in_le32(&rec->dma->status) & RUN) && timeout-- > 0)
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* set the format and rate to the chip.
|
|
|
|
* call the lowlevel function if defined (e.g. for AWACS).
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static void snd_pmac_pcm_set_format(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
/* set up frequency and format */
|
|
|
|
out_le32(&chip->awacs->control, chip->control_mask | (chip->rate_index << 8));
|
|
|
|
out_le32(&chip->awacs->byteswap, chip->format == SNDRV_PCM_FORMAT_S16_LE ? 1 : 0);
|
|
|
|
if (chip->set_format)
|
|
|
|
chip->set_format(chip);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* stop the DMA transfer
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static inline void snd_pmac_dma_stop(struct pmac_stream *rec)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
out_le32(&rec->dma->control, (RUN|WAKE|FLUSH|PAUSE) << 16);
|
|
|
|
snd_pmac_wait_ack(rec);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* set the command pointer address
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static inline void snd_pmac_dma_set_command(struct pmac_stream *rec, struct pmac_dbdma *cmd)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
out_le32(&rec->dma->cmdptr, cmd->addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* start the DMA
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static inline void snd_pmac_dma_run(struct pmac_stream *rec, int status)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
out_le32(&rec->dma->control, status | (status << 16));
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* prepare playback/capture stream
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_pcm_prepare(struct snd_pmac *chip, struct pmac_stream *rec, struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
volatile struct dbdma_cmd __iomem *cp;
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pcm_runtime *runtime = subs->runtime;
|
2005-04-16 18:20:36 -04:00
|
|
|
int rate_index;
|
|
|
|
long offset;
|
2005-11-17 09:09:46 -05:00
|
|
|
struct pmac_stream *astr;
|
2008-04-16 07:16:05 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
rec->dma_size = snd_pcm_lib_buffer_bytes(subs);
|
|
|
|
rec->period_size = snd_pcm_lib_period_bytes(subs);
|
|
|
|
rec->nperiods = rec->dma_size / rec->period_size;
|
|
|
|
rec->cur_period = 0;
|
|
|
|
rate_index = snd_pmac_rate_index(chip, rec, runtime->rate);
|
|
|
|
|
|
|
|
/* set up constraints */
|
|
|
|
astr = snd_pmac_get_stream(chip, another_stream(rec->stream));
|
2005-10-10 05:46:31 -04:00
|
|
|
if (! astr)
|
|
|
|
return -EINVAL;
|
2005-04-16 18:20:36 -04:00
|
|
|
astr->cur_freqs = 1 << rate_index;
|
|
|
|
astr->cur_formats = 1 << runtime->format;
|
|
|
|
chip->rate_index = rate_index;
|
|
|
|
chip->format = runtime->format;
|
|
|
|
|
|
|
|
/* We really want to execute a DMA stop command, after the AWACS
|
|
|
|
* is initialized.
|
|
|
|
* For reasons I don't understand, it stops the hissing noise
|
|
|
|
* common to many PowerBook G3 systems and random noise otherwise
|
|
|
|
* captured on iBook2's about every third time. -ReneR
|
|
|
|
*/
|
|
|
|
spin_lock_irq(&chip->reg_lock);
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
st_le16(&chip->extra_dma.cmds->command, DBDMA_STOP);
|
|
|
|
snd_pmac_dma_set_command(rec, &chip->extra_dma);
|
|
|
|
snd_pmac_dma_run(rec, RUN);
|
|
|
|
spin_unlock_irq(&chip->reg_lock);
|
|
|
|
mdelay(5);
|
|
|
|
spin_lock_irq(&chip->reg_lock);
|
|
|
|
/* continuous DMA memory type doesn't provide the physical address,
|
|
|
|
* so we need to resolve the address here...
|
|
|
|
*/
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
offset = runtime->dma_addr;
|
2005-04-16 18:20:36 -04:00
|
|
|
for (i = 0, cp = rec->cmd.cmds; i < rec->nperiods; i++, cp++) {
|
|
|
|
st_le32(&cp->phy_addr, offset);
|
|
|
|
st_le16(&cp->req_count, rec->period_size);
|
|
|
|
/*st_le16(&cp->res_count, 0);*/
|
|
|
|
st_le16(&cp->xfer_status, 0);
|
|
|
|
offset += rec->period_size;
|
|
|
|
}
|
|
|
|
/* make loop */
|
|
|
|
st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
|
|
|
|
st_le32(&cp->cmd_dep, rec->cmd.addr);
|
|
|
|
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
snd_pmac_dma_set_command(rec, &rec->cmd);
|
|
|
|
spin_unlock_irq(&chip->reg_lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCM trigger/stop
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_pcm_trigger(struct snd_pmac *chip, struct pmac_stream *rec,
|
|
|
|
struct snd_pcm_substream *subs, int cmd)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
volatile struct dbdma_cmd __iomem *cp;
|
|
|
|
int i, command;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
|
|
if (rec->running)
|
|
|
|
return -EBUSY;
|
|
|
|
command = (subs->stream == SNDRV_PCM_STREAM_PLAYBACK ?
|
|
|
|
OUTPUT_MORE : INPUT_MORE) + INTR_ALWAYS;
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
snd_pmac_beep_stop(chip);
|
|
|
|
snd_pmac_pcm_set_format(chip);
|
|
|
|
for (i = 0, cp = rec->cmd.cmds; i < rec->nperiods; i++, cp++)
|
|
|
|
out_le16(&cp->command, command);
|
|
|
|
snd_pmac_dma_set_command(rec, &rec->cmd);
|
|
|
|
(void)in_le32(&rec->dma->status);
|
|
|
|
snd_pmac_dma_run(rec, RUN|WAKE);
|
|
|
|
rec->running = 1;
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
rec->running = 0;
|
2009-02-05 10:02:46 -05:00
|
|
|
/*printk(KERN_DEBUG "stopped!!\n");*/
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
for (i = 0, cp = rec->cmd.cmds; i < rec->nperiods; i++, cp++)
|
|
|
|
out_le16(&cp->command, DBDMA_STOP);
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* return the current pointer
|
|
|
|
*/
|
|
|
|
inline
|
2005-11-17 09:09:46 -05:00
|
|
|
static snd_pcm_uframes_t snd_pmac_pcm_pointer(struct snd_pmac *chip,
|
|
|
|
struct pmac_stream *rec,
|
|
|
|
struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
int count = 0;
|
|
|
|
|
|
|
|
#if 1 /* hmm.. how can we get the current dma pointer?? */
|
|
|
|
int stat;
|
|
|
|
volatile struct dbdma_cmd __iomem *cp = &rec->cmd.cmds[rec->cur_period];
|
|
|
|
stat = ld_le16(&cp->xfer_status);
|
|
|
|
if (stat & (ACTIVE|DEAD)) {
|
|
|
|
count = in_le16(&cp->res_count);
|
|
|
|
if (count)
|
|
|
|
count = rec->period_size - count;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
count += rec->cur_period * rec->period_size;
|
2009-02-05 10:02:46 -05:00
|
|
|
/*printk(KERN_DEBUG "pointer=%d\n", count);*/
|
2005-04-16 18:20:36 -04:00
|
|
|
return bytes_to_frames(subs->runtime, count);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* playback
|
|
|
|
*/
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_playback_prepare(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
return snd_pmac_pcm_prepare(chip, &chip->playback, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_playback_trigger(struct snd_pcm_substream *subs,
|
2005-04-16 18:20:36 -04:00
|
|
|
int cmd)
|
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
return snd_pmac_pcm_trigger(chip, &chip->playback, subs, cmd);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static snd_pcm_uframes_t snd_pmac_playback_pointer(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
return snd_pmac_pcm_pointer(chip, &chip->playback, subs);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* capture
|
|
|
|
*/
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_capture_prepare(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
return snd_pmac_pcm_prepare(chip, &chip->capture, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_capture_trigger(struct snd_pcm_substream *subs,
|
2005-04-16 18:20:36 -04:00
|
|
|
int cmd)
|
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
return snd_pmac_pcm_trigger(chip, &chip->capture, subs, cmd);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static snd_pcm_uframes_t snd_pmac_capture_pointer(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
return snd_pmac_pcm_pointer(chip, &chip->capture, subs);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2008-01-16 09:57:08 -05:00
|
|
|
/*
|
|
|
|
* Handle DEAD DMA transfers:
|
|
|
|
* if the TX status comes up "DEAD" - reported on some Power Computing machines
|
|
|
|
* we need to re-start the dbdma - but from a different physical start address
|
|
|
|
* and with a different transfer length. It would get very messy to do this
|
|
|
|
* with the normal dbdma_cmd blocks - we would have to re-write the buffer start
|
|
|
|
* addresses each time. So, we will keep a single dbdma_cmd block which can be
|
|
|
|
* fiddled with.
|
|
|
|
* When DEAD status is first reported the content of the faulted dbdma block is
|
|
|
|
* copied into the emergency buffer and we note that the buffer is in use.
|
|
|
|
* we then bump the start physical address by the amount that was successfully
|
|
|
|
* output before it died.
|
|
|
|
* On any subsequent DEAD result we just do the bump-ups (we know that we are
|
|
|
|
* already using the emergency dbdma_cmd).
|
|
|
|
* CHECK: this just tries to "do it". It is possible that we should abandon
|
|
|
|
* xfers when the number of residual bytes gets below a certain value - I can
|
|
|
|
* see that this might cause a loop-forever if a too small transfer causes
|
|
|
|
* DEAD status. However this is a TODO for now - we'll see what gets reported.
|
|
|
|
* When we get a successful transfer result with the emergency buffer we just
|
|
|
|
* pretend that it completed using the original dmdma_cmd and carry on. The
|
|
|
|
* 'next_cmd' field will already point back to the original loop of blocks.
|
|
|
|
*/
|
|
|
|
static inline void snd_pmac_pcm_dead_xfer(struct pmac_stream *rec,
|
|
|
|
volatile struct dbdma_cmd __iomem *cp)
|
|
|
|
{
|
|
|
|
unsigned short req, res ;
|
|
|
|
unsigned int phy ;
|
|
|
|
|
|
|
|
/* printk(KERN_WARNING "snd-powermac: DMA died - patching it up!\n"); */
|
|
|
|
|
|
|
|
/* to clear DEAD status we must first clear RUN
|
|
|
|
set it to quiescent to be on the safe side */
|
|
|
|
(void)in_le32(&rec->dma->status);
|
|
|
|
out_le32(&rec->dma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
|
|
|
|
|
|
|
|
if (!emergency_in_use) { /* new problem */
|
|
|
|
memcpy((void *)emergency_dbdma.cmds, (void *)cp,
|
|
|
|
sizeof(struct dbdma_cmd));
|
|
|
|
emergency_in_use = 1;
|
|
|
|
st_le16(&cp->xfer_status, 0);
|
|
|
|
st_le16(&cp->req_count, rec->period_size);
|
|
|
|
cp = emergency_dbdma.cmds;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* now bump the values to reflect the amount
|
|
|
|
we haven't yet shifted */
|
|
|
|
req = ld_le16(&cp->req_count);
|
|
|
|
res = ld_le16(&cp->res_count);
|
|
|
|
phy = ld_le32(&cp->phy_addr);
|
|
|
|
phy += (req - res);
|
|
|
|
st_le16(&cp->req_count, res);
|
|
|
|
st_le16(&cp->res_count, 0);
|
|
|
|
st_le16(&cp->xfer_status, 0);
|
|
|
|
st_le32(&cp->phy_addr, phy);
|
|
|
|
|
|
|
|
st_le32(&cp->cmd_dep, rec->cmd.addr
|
|
|
|
+ sizeof(struct dbdma_cmd)*((rec->cur_period+1)%rec->nperiods));
|
|
|
|
|
|
|
|
st_le16(&cp->command, OUTPUT_MORE | BR_ALWAYS | INTR_ALWAYS);
|
|
|
|
|
|
|
|
/* point at our patched up command block */
|
|
|
|
out_le32(&rec->dma->cmdptr, emergency_dbdma.addr);
|
|
|
|
|
|
|
|
/* we must re-start the controller */
|
|
|
|
(void)in_le32(&rec->dma->status);
|
|
|
|
/* should complete clearing the DEAD status */
|
|
|
|
out_le32(&rec->dma->control, ((RUN|WAKE) << 16) + (RUN|WAKE));
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* update playback/capture pointer from interrupts
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static void snd_pmac_pcm_update(struct snd_pmac *chip, struct pmac_stream *rec)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
volatile struct dbdma_cmd __iomem *cp;
|
|
|
|
int c;
|
|
|
|
int stat;
|
|
|
|
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
if (rec->running) {
|
|
|
|
for (c = 0; c < rec->nperiods; c++) { /* at most all fragments */
|
2008-01-16 09:57:08 -05:00
|
|
|
|
|
|
|
if (emergency_in_use) /* already using DEAD xfer? */
|
|
|
|
cp = emergency_dbdma.cmds;
|
|
|
|
else
|
|
|
|
cp = &rec->cmd.cmds[rec->cur_period];
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
stat = ld_le16(&cp->xfer_status);
|
2008-01-16 09:57:08 -05:00
|
|
|
|
|
|
|
if (stat & DEAD) {
|
|
|
|
snd_pmac_pcm_dead_xfer(rec, cp);
|
|
|
|
break; /* this block is still going */
|
|
|
|
}
|
|
|
|
|
|
|
|
if (emergency_in_use)
|
|
|
|
emergency_in_use = 0 ; /* done that */
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (! (stat & ACTIVE))
|
|
|
|
break;
|
2008-01-16 09:57:08 -05:00
|
|
|
|
2009-02-05 10:02:46 -05:00
|
|
|
/*printk(KERN_DEBUG "update frag %d\n", rec->cur_period);*/
|
2005-04-16 18:20:36 -04:00
|
|
|
st_le16(&cp->xfer_status, 0);
|
|
|
|
st_le16(&cp->req_count, rec->period_size);
|
|
|
|
/*st_le16(&cp->res_count, 0);*/
|
|
|
|
rec->cur_period++;
|
|
|
|
if (rec->cur_period >= rec->nperiods) {
|
|
|
|
rec->cur_period = 0;
|
2008-01-16 09:57:08 -05:00
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
snd_pcm_period_elapsed(rec->substream);
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* hw info
|
|
|
|
*/
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static struct snd_pcm_hardware snd_pmac_playback =
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
.info = (SNDRV_PCM_INFO_INTERLEAVED |
|
|
|
|
SNDRV_PCM_INFO_MMAP |
|
|
|
|
SNDRV_PCM_INFO_MMAP_VALID |
|
|
|
|
SNDRV_PCM_INFO_RESUME),
|
|
|
|
.formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_LE,
|
|
|
|
.rates = SNDRV_PCM_RATE_8000_44100,
|
|
|
|
.rate_min = 7350,
|
|
|
|
.rate_max = 44100,
|
|
|
|
.channels_min = 2,
|
|
|
|
.channels_max = 2,
|
|
|
|
.buffer_bytes_max = 131072,
|
|
|
|
.period_bytes_min = 256,
|
|
|
|
.period_bytes_max = 16384,
|
|
|
|
.periods_min = 3,
|
|
|
|
.periods_max = PMAC_MAX_FRAGS,
|
|
|
|
};
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static struct snd_pcm_hardware snd_pmac_capture =
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
.info = (SNDRV_PCM_INFO_INTERLEAVED |
|
|
|
|
SNDRV_PCM_INFO_MMAP |
|
|
|
|
SNDRV_PCM_INFO_MMAP_VALID |
|
|
|
|
SNDRV_PCM_INFO_RESUME),
|
|
|
|
.formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_LE,
|
|
|
|
.rates = SNDRV_PCM_RATE_8000_44100,
|
|
|
|
.rate_min = 7350,
|
|
|
|
.rate_max = 44100,
|
|
|
|
.channels_min = 2,
|
|
|
|
.channels_max = 2,
|
|
|
|
.buffer_bytes_max = 131072,
|
|
|
|
.period_bytes_min = 256,
|
|
|
|
.period_bytes_max = 16384,
|
|
|
|
.periods_min = 3,
|
|
|
|
.periods_max = PMAC_MAX_FRAGS,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
#if 0 // NYI
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_hw_rule_rate(struct snd_pcm_hw_params *params,
|
|
|
|
struct snd_pcm_hw_rule *rule)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = rule->private;
|
|
|
|
struct pmac_stream *rec = snd_pmac_get_stream(chip, rule->deps[0]);
|
2005-04-16 18:20:36 -04:00
|
|
|
int i, freq_table[8], num_freqs;
|
|
|
|
|
2005-10-10 05:46:31 -04:00
|
|
|
if (! rec)
|
|
|
|
return -EINVAL;
|
2005-04-16 18:20:36 -04:00
|
|
|
num_freqs = 0;
|
|
|
|
for (i = chip->num_freqs - 1; i >= 0; i--) {
|
|
|
|
if (rec->cur_freqs & (1 << i))
|
|
|
|
freq_table[num_freqs++] = chip->freq_table[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
return snd_interval_list(hw_param_interval(params, rule->var),
|
|
|
|
num_freqs, freq_table, 0);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_hw_rule_format(struct snd_pcm_hw_params *params,
|
|
|
|
struct snd_pcm_hw_rule *rule)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = rule->private;
|
|
|
|
struct pmac_stream *rec = snd_pmac_get_stream(chip, rule->deps[0]);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-10-10 05:46:31 -04:00
|
|
|
if (! rec)
|
|
|
|
return -EINVAL;
|
2005-04-16 18:20:36 -04:00
|
|
|
return snd_mask_refine_set(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
|
|
|
|
rec->cur_formats);
|
|
|
|
}
|
|
|
|
#endif // NYI
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_pcm_open(struct snd_pmac *chip, struct pmac_stream *rec,
|
|
|
|
struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pcm_runtime *runtime = subs->runtime;
|
2007-08-13 11:40:54 -04:00
|
|
|
int i;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* look up frequency table and fill bit mask */
|
|
|
|
runtime->hw.rates = 0;
|
2007-08-13 11:40:54 -04:00
|
|
|
for (i = 0; i < chip->num_freqs; i++)
|
|
|
|
if (chip->freqs_ok & (1 << i))
|
|
|
|
runtime->hw.rates |=
|
|
|
|
snd_pcm_rate_to_rate_bit(chip->freq_table[i]);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* check for minimum and maximum rates */
|
|
|
|
for (i = 0; i < chip->num_freqs; i++) {
|
|
|
|
if (chip->freqs_ok & (1 << i)) {
|
|
|
|
runtime->hw.rate_max = chip->freq_table[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
for (i = chip->num_freqs - 1; i >= 0; i--) {
|
|
|
|
if (chip->freqs_ok & (1 << i)) {
|
|
|
|
runtime->hw.rate_min = chip->freq_table[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
runtime->hw.formats = chip->formats_ok;
|
|
|
|
if (chip->can_capture) {
|
|
|
|
if (! chip->can_duplex)
|
|
|
|
runtime->hw.info |= SNDRV_PCM_INFO_HALF_DUPLEX;
|
|
|
|
runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX;
|
|
|
|
}
|
|
|
|
runtime->private_data = rec;
|
|
|
|
rec->substream = subs;
|
|
|
|
|
|
|
|
#if 0 /* FIXME: still under development.. */
|
|
|
|
snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
|
|
|
|
snd_pmac_hw_rule_rate, chip, rec->stream, -1);
|
|
|
|
snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT,
|
|
|
|
snd_pmac_hw_rule_format, chip, rec->stream, -1);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
runtime->hw.periods_max = rec->cmd.size - 1;
|
|
|
|
|
|
|
|
/* constraints to fix choppy sound */
|
|
|
|
snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_pcm_close(struct snd_pmac *chip, struct pmac_stream *rec,
|
|
|
|
struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct pmac_stream *astr;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
|
|
|
|
astr = snd_pmac_get_stream(chip, another_stream(rec->stream));
|
2005-10-10 05:46:31 -04:00
|
|
|
if (! astr)
|
|
|
|
return -EINVAL;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* reset constraints */
|
|
|
|
astr->cur_freqs = chip->freqs_ok;
|
|
|
|
astr->cur_formats = chip->formats_ok;
|
2008-04-16 07:16:05 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_playback_open(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
subs->runtime->hw = snd_pmac_playback;
|
|
|
|
return snd_pmac_pcm_open(chip, &chip->playback, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_capture_open(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
subs->runtime->hw = snd_pmac_capture;
|
|
|
|
return snd_pmac_pcm_open(chip, &chip->capture, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_playback_close(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
return snd_pmac_pcm_close(chip, &chip->playback, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_capture_close(struct snd_pcm_substream *subs)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
return snd_pmac_pcm_close(chip, &chip->capture, subs);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
*/
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static struct snd_pcm_ops snd_pmac_playback_ops = {
|
2005-04-16 18:20:36 -04:00
|
|
|
.open = snd_pmac_playback_open,
|
|
|
|
.close = snd_pmac_playback_close,
|
|
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
|
|
.hw_params = snd_pmac_pcm_hw_params,
|
|
|
|
.hw_free = snd_pmac_pcm_hw_free,
|
|
|
|
.prepare = snd_pmac_playback_prepare,
|
|
|
|
.trigger = snd_pmac_playback_trigger,
|
|
|
|
.pointer = snd_pmac_playback_pointer,
|
|
|
|
};
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static struct snd_pcm_ops snd_pmac_capture_ops = {
|
2005-04-16 18:20:36 -04:00
|
|
|
.open = snd_pmac_capture_open,
|
|
|
|
.close = snd_pmac_capture_close,
|
|
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
|
|
.hw_params = snd_pmac_pcm_hw_params,
|
|
|
|
.hw_free = snd_pmac_pcm_hw_free,
|
|
|
|
.prepare = snd_pmac_capture_prepare,
|
|
|
|
.trigger = snd_pmac_capture_trigger,
|
|
|
|
.pointer = snd_pmac_capture_pointer,
|
|
|
|
};
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
int __init snd_pmac_pcm_new(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pcm *pcm;
|
2005-04-16 18:20:36 -04:00
|
|
|
int err;
|
|
|
|
int num_captures = 1;
|
|
|
|
|
|
|
|
if (! chip->can_capture)
|
|
|
|
num_captures = 0;
|
|
|
|
err = snd_pcm_new(chip->card, chip->card->driver, 0, 1, num_captures, &pcm);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_pmac_playback_ops);
|
|
|
|
if (chip->can_capture)
|
|
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_pmac_capture_ops);
|
|
|
|
|
|
|
|
pcm->private_data = chip;
|
|
|
|
pcm->info_flags = SNDRV_PCM_INFO_JOINT_DUPLEX;
|
|
|
|
strcpy(pcm->name, chip->card->shortname);
|
|
|
|
chip->pcm = pcm;
|
|
|
|
|
|
|
|
chip->formats_ok = SNDRV_PCM_FMTBIT_S16_BE;
|
|
|
|
if (chip->can_byte_swap)
|
|
|
|
chip->formats_ok |= SNDRV_PCM_FMTBIT_S16_LE;
|
|
|
|
|
|
|
|
chip->playback.cur_formats = chip->formats_ok;
|
|
|
|
chip->capture.cur_formats = chip->formats_ok;
|
|
|
|
chip->playback.cur_freqs = chip->freqs_ok;
|
|
|
|
chip->capture.cur_freqs = chip->freqs_ok;
|
|
|
|
|
|
|
|
/* preallocate 64k buffer */
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
|
|
|
&chip->pdev->dev,
|
2005-04-16 18:20:36 -04:00
|
|
|
64 * 1024, 64 * 1024);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static void snd_pmac_dbdma_reset(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
out_le32(&chip->playback.dma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
|
|
|
|
snd_pmac_wait_ack(&chip->playback);
|
|
|
|
out_le32(&chip->capture.dma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
|
|
|
|
snd_pmac_wait_ack(&chip->capture);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* handling beep
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
void snd_pmac_beep_dma_start(struct snd_pmac *chip, int bytes, unsigned long addr, int speed)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct pmac_stream *rec = &chip->playback;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
st_le16(&chip->extra_dma.cmds->req_count, bytes);
|
|
|
|
st_le16(&chip->extra_dma.cmds->xfer_status, 0);
|
|
|
|
st_le32(&chip->extra_dma.cmds->cmd_dep, chip->extra_dma.addr);
|
|
|
|
st_le32(&chip->extra_dma.cmds->phy_addr, addr);
|
|
|
|
st_le16(&chip->extra_dma.cmds->command, OUTPUT_MORE + BR_ALWAYS);
|
|
|
|
out_le32(&chip->awacs->control,
|
|
|
|
(in_le32(&chip->awacs->control) & ~0x1f00)
|
|
|
|
| (speed << 8));
|
|
|
|
out_le32(&chip->awacs->byteswap, 0);
|
|
|
|
snd_pmac_dma_set_command(rec, &chip->extra_dma);
|
|
|
|
snd_pmac_dma_run(rec, RUN);
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
void snd_pmac_beep_dma_stop(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
snd_pmac_dma_stop(&chip->playback);
|
|
|
|
st_le16(&chip->extra_dma.cmds->command, DBDMA_STOP);
|
|
|
|
snd_pmac_pcm_set_format(chip); /* reset format */
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* interrupt handlers
|
|
|
|
*/
|
|
|
|
static irqreturn_t
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
snd_pmac_tx_intr(int irq, void *devid)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = devid;
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_pmac_pcm_update(chip, &chip->playback);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static irqreturn_t
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
snd_pmac_rx_intr(int irq, void *devid)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = devid;
|
2005-04-16 18:20:36 -04:00
|
|
|
snd_pmac_pcm_update(chip, &chip->capture);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static irqreturn_t
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
snd_pmac_ctrl_intr(int irq, void *devid)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = devid;
|
2005-04-16 18:20:36 -04:00
|
|
|
int ctrl = in_le32(&chip->awacs->control);
|
|
|
|
|
2009-02-05 10:02:46 -05:00
|
|
|
/*printk(KERN_DEBUG "pmac: control interrupt.. 0x%x\n", ctrl);*/
|
2005-04-16 18:20:36 -04:00
|
|
|
if (ctrl & MASK_PORTCHG) {
|
|
|
|
/* do something when headphone is plugged/unplugged? */
|
|
|
|
if (chip->update_automute)
|
|
|
|
chip->update_automute(chip, 1);
|
|
|
|
}
|
|
|
|
if (ctrl & MASK_CNTLERR) {
|
|
|
|
int err = (in_le32(&chip->awacs->codec_stat) & MASK_ERRCODE) >> 16;
|
|
|
|
if (err && chip->model <= PMAC_SCREAMER)
|
|
|
|
snd_printk(KERN_DEBUG "error %x\n", err);
|
|
|
|
}
|
|
|
|
/* Writing 1s to the CNTLERR and PORTCHG bits clears them... */
|
|
|
|
out_le32(&chip->awacs->control, ctrl);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* a wrapper to feature call for compatibility
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static void snd_pmac_sound_feature(struct snd_pmac *chip, int enable)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-08-17 06:36:35 -04:00
|
|
|
if (ppc_md.feature_call)
|
|
|
|
ppc_md.feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, chip->node, 0, enable);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* release resources
|
|
|
|
*/
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_free(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
/* stop sounds */
|
|
|
|
if (chip->initialized) {
|
|
|
|
snd_pmac_dbdma_reset(chip);
|
|
|
|
/* disable interrupts from awacs interface */
|
|
|
|
out_le32(&chip->awacs->control, in_le32(&chip->awacs->control) & 0xfff);
|
|
|
|
}
|
|
|
|
|
2007-06-19 00:37:39 -04:00
|
|
|
if (chip->node)
|
|
|
|
snd_pmac_sound_feature(chip, 0);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* clean up mixer if any */
|
|
|
|
if (chip->mixer_free)
|
|
|
|
chip->mixer_free(chip);
|
|
|
|
|
|
|
|
snd_pmac_detach_beep(chip);
|
|
|
|
|
|
|
|
/* release resources */
|
|
|
|
if (chip->irq >= 0)
|
|
|
|
free_irq(chip->irq, (void*)chip);
|
|
|
|
if (chip->tx_irq >= 0)
|
|
|
|
free_irq(chip->tx_irq, (void*)chip);
|
|
|
|
if (chip->rx_irq >= 0)
|
|
|
|
free_irq(chip->rx_irq, (void*)chip);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
snd_pmac_dbdma_free(chip, &chip->playback.cmd);
|
|
|
|
snd_pmac_dbdma_free(chip, &chip->capture.cmd);
|
|
|
|
snd_pmac_dbdma_free(chip, &chip->extra_dma);
|
2008-01-16 09:57:08 -05:00
|
|
|
snd_pmac_dbdma_free(chip, &emergency_dbdma);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (chip->macio_base)
|
|
|
|
iounmap(chip->macio_base);
|
|
|
|
if (chip->latch_base)
|
|
|
|
iounmap(chip->latch_base);
|
|
|
|
if (chip->awacs)
|
|
|
|
iounmap(chip->awacs);
|
|
|
|
if (chip->playback.dma)
|
|
|
|
iounmap(chip->playback.dma);
|
|
|
|
if (chip->capture.dma)
|
|
|
|
iounmap(chip->capture.dma);
|
2005-12-13 02:01:21 -05:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (chip->node) {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
int i;
|
2005-04-16 18:20:36 -04:00
|
|
|
for (i = 0; i < 3; i++) {
|
2005-12-13 02:01:21 -05:00
|
|
|
if (chip->requested & (1 << i))
|
|
|
|
release_mem_region(chip->rsrc[i].start,
|
|
|
|
chip->rsrc[i].end -
|
|
|
|
chip->rsrc[i].start + 1);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
}
|
2005-12-13 02:01:21 -05:00
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
if (chip->pdev)
|
|
|
|
pci_dev_put(chip->pdev);
|
2007-04-23 23:53:04 -04:00
|
|
|
of_node_put(chip->node);
|
2005-04-16 18:20:36 -04:00
|
|
|
kfree(chip);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* free the device
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static int snd_pmac_dev_free(struct snd_device *device)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = device->device_data;
|
2005-04-16 18:20:36 -04:00
|
|
|
return snd_pmac_free(chip);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* check the machine support byteswap (little-endian)
|
|
|
|
*/
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static void __init detect_byte_swap(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
struct device_node *mio;
|
|
|
|
|
|
|
|
/* if seems that Keylargo can't byte-swap */
|
|
|
|
for (mio = chip->node->parent; mio; mio = mio->parent) {
|
|
|
|
if (strcmp(mio->name, "mac-io") == 0) {
|
2007-05-03 03:26:52 -04:00
|
|
|
if (of_device_is_compatible(mio, "Keylargo"))
|
2005-04-16 18:20:36 -04:00
|
|
|
chip->can_byte_swap = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* it seems the Pismo & iBook can't byte-swap in hardware. */
|
|
|
|
if (machine_is_compatible("PowerBook3,1") ||
|
|
|
|
machine_is_compatible("PowerBook2,1"))
|
|
|
|
chip->can_byte_swap = 0 ;
|
|
|
|
|
|
|
|
if (machine_is_compatible("PowerBook2,1"))
|
|
|
|
chip->can_duplex = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* detect a sound chip
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static int __init snd_pmac_detect(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2007-04-23 23:53:04 -04:00
|
|
|
struct device_node *sound;
|
|
|
|
struct device_node *dn;
|
2007-04-03 08:39:14 -04:00
|
|
|
const unsigned int *prop;
|
|
|
|
unsigned int l;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
struct macio_chip* macio;
|
|
|
|
|
2006-03-28 07:15:54 -05:00
|
|
|
if (!machine_is(powermac))
|
2005-04-16 18:20:36 -04:00
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
chip->subframe = 0;
|
|
|
|
chip->revision = 0;
|
|
|
|
chip->freqs_ok = 0xff; /* all ok */
|
|
|
|
chip->model = PMAC_AWACS;
|
|
|
|
chip->can_byte_swap = 1;
|
|
|
|
chip->can_duplex = 1;
|
|
|
|
chip->can_capture = 1;
|
|
|
|
chip->num_freqs = ARRAY_SIZE(awacs_freqs);
|
|
|
|
chip->freq_table = awacs_freqs;
|
2006-02-07 23:04:18 -05:00
|
|
|
chip->pdev = NULL;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
chip->control_mask = MASK_IEPC | MASK_IEE | 0x11; /* default */
|
|
|
|
|
|
|
|
/* check machine type */
|
|
|
|
if (machine_is_compatible("AAPL,3400/2400")
|
|
|
|
|| machine_is_compatible("AAPL,3500"))
|
|
|
|
chip->is_pbook_3400 = 1;
|
|
|
|
else if (machine_is_compatible("PowerBook1,1")
|
|
|
|
|| machine_is_compatible("AAPL,PowerBook1998"))
|
|
|
|
chip->is_pbook_G3 = 1;
|
2007-04-23 23:53:04 -04:00
|
|
|
chip->node = of_find_node_by_name(NULL, "awacs");
|
|
|
|
sound = of_node_get(chip->node);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* powermac G3 models have a node called "davbus"
|
|
|
|
* with a child called "sound".
|
|
|
|
*/
|
2005-05-18 10:31:51 -04:00
|
|
|
if (!chip->node)
|
2007-04-23 23:53:04 -04:00
|
|
|
chip->node = of_find_node_by_name(NULL, "davbus");
|
2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* if we didn't find a davbus device, try 'i2s-a' since
|
|
|
|
* this seems to be what iBooks have
|
|
|
|
*/
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
if (! chip->node) {
|
2007-04-23 23:53:04 -04:00
|
|
|
chip->node = of_find_node_by_name(NULL, "i2s-a");
|
2005-05-18 10:31:51 -04:00
|
|
|
if (chip->node && chip->node->parent &&
|
|
|
|
chip->node->parent->parent) {
|
2007-05-03 03:26:52 -04:00
|
|
|
if (of_device_is_compatible(chip->node->parent->parent,
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
"K2-Keylargo"))
|
|
|
|
chip->is_k2 = 1;
|
|
|
|
}
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
if (! chip->node)
|
|
|
|
return -ENODEV;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
|
2005-05-18 10:31:51 -04:00
|
|
|
if (!sound) {
|
2007-04-23 23:53:04 -04:00
|
|
|
sound = of_find_node_by_name(NULL, "sound");
|
2005-05-18 10:31:51 -04:00
|
|
|
while (sound && sound->parent != chip->node)
|
2007-04-23 23:53:04 -04:00
|
|
|
sound = of_find_node_by_name(sound, "sound");
|
2005-05-18 10:31:51 -04:00
|
|
|
}
|
2007-04-23 23:53:04 -04:00
|
|
|
if (! sound) {
|
|
|
|
of_node_put(chip->node);
|
2007-06-19 00:37:39 -04:00
|
|
|
chip->node = NULL;
|
2005-04-16 18:20:36 -04:00
|
|
|
return -ENODEV;
|
2007-04-23 23:53:04 -04:00
|
|
|
}
|
2007-04-03 08:39:14 -04:00
|
|
|
prop = of_get_property(sound, "sub-frame", NULL);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (prop && *prop < 16)
|
|
|
|
chip->subframe = *prop;
|
2007-04-03 08:39:14 -04:00
|
|
|
prop = of_get_property(sound, "layout-id", NULL);
|
2006-06-21 09:43:44 -04:00
|
|
|
if (prop) {
|
|
|
|
/* partly deprecate snd-powermac, for those machines
|
|
|
|
* that have a layout-id property for now */
|
|
|
|
printk(KERN_INFO "snd-powermac no longer handles any "
|
|
|
|
"machines with a layout-id property "
|
|
|
|
"in the device-tree, use snd-aoa.\n");
|
2007-06-19 00:37:39 -04:00
|
|
|
of_node_put(sound);
|
2007-04-23 23:53:04 -04:00
|
|
|
of_node_put(chip->node);
|
2007-06-19 00:37:39 -04:00
|
|
|
chip->node = NULL;
|
2006-06-21 09:43:44 -04:00
|
|
|
return -ENODEV;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
/* This should be verified on older screamers */
|
2007-05-03 03:26:52 -04:00
|
|
|
if (of_device_is_compatible(sound, "screamer")) {
|
2005-04-16 18:20:36 -04:00
|
|
|
chip->model = PMAC_SCREAMER;
|
|
|
|
// chip->can_byte_swap = 0; /* FIXME: check this */
|
|
|
|
}
|
2007-05-03 03:26:52 -04:00
|
|
|
if (of_device_is_compatible(sound, "burgundy")) {
|
2005-04-16 18:20:36 -04:00
|
|
|
chip->model = PMAC_BURGUNDY;
|
|
|
|
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
|
|
|
|
}
|
2007-05-03 03:26:52 -04:00
|
|
|
if (of_device_is_compatible(sound, "daca")) {
|
2005-04-16 18:20:36 -04:00
|
|
|
chip->model = PMAC_DACA;
|
|
|
|
chip->can_capture = 0; /* no capture */
|
|
|
|
chip->can_duplex = 0;
|
|
|
|
// chip->can_byte_swap = 0; /* FIXME: check this */
|
|
|
|
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
|
|
|
|
}
|
2007-05-03 03:26:52 -04:00
|
|
|
if (of_device_is_compatible(sound, "tumbler")) {
|
2005-04-16 18:20:36 -04:00
|
|
|
chip->model = PMAC_TUMBLER;
|
2009-01-20 15:01:16 -05:00
|
|
|
chip->can_capture = machine_is_compatible("PowerMac4,2")
|
|
|
|
|| machine_is_compatible("PowerBook4,1");
|
2005-04-16 18:20:36 -04:00
|
|
|
chip->can_duplex = 0;
|
|
|
|
// chip->can_byte_swap = 0; /* FIXME: check this */
|
|
|
|
chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
|
|
|
|
chip->freq_table = tumbler_freqs;
|
|
|
|
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
|
|
|
|
}
|
2007-05-03 03:26:52 -04:00
|
|
|
if (of_device_is_compatible(sound, "snapper")) {
|
2005-04-16 18:20:36 -04:00
|
|
|
chip->model = PMAC_SNAPPER;
|
|
|
|
// chip->can_byte_swap = 0; /* FIXME: check this */
|
|
|
|
chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
|
|
|
|
chip->freq_table = tumbler_freqs;
|
|
|
|
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
|
|
|
|
}
|
2007-04-03 08:39:14 -04:00
|
|
|
prop = of_get_property(sound, "device-id", NULL);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (prop)
|
|
|
|
chip->device_id = *prop;
|
2007-04-23 23:53:04 -04:00
|
|
|
dn = of_find_node_by_name(NULL, "perch");
|
|
|
|
chip->has_iic = (dn != NULL);
|
|
|
|
of_node_put(dn);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
/* We need the PCI device for DMA allocations, let's use a crude method
|
|
|
|
* for now ...
|
|
|
|
*/
|
|
|
|
macio = macio_find(chip->node, macio_unknown);
|
|
|
|
if (macio == NULL)
|
|
|
|
printk(KERN_WARNING "snd-powermac: can't locate macio !\n");
|
|
|
|
else {
|
|
|
|
struct pci_dev *pdev = NULL;
|
|
|
|
|
|
|
|
for_each_pci_dev(pdev) {
|
|
|
|
struct device_node *np = pci_device_to_OF_node(pdev);
|
|
|
|
if (np && np == macio->of_node) {
|
|
|
|
chip->pdev = pdev;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (chip->pdev == NULL)
|
2005-05-18 10:31:51 -04:00
|
|
|
printk(KERN_WARNING "snd-powermac: can't locate macio PCI"
|
|
|
|
" device !\n");
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
detect_byte_swap(chip);
|
|
|
|
|
|
|
|
/* look for a property saying what sample rates
|
|
|
|
are available */
|
2007-04-03 08:39:14 -04:00
|
|
|
prop = of_get_property(sound, "sample-rates", &l);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (! prop)
|
2007-04-03 08:39:14 -04:00
|
|
|
prop = of_get_property(sound, "output-frame-rates", &l);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (prop) {
|
|
|
|
int i;
|
|
|
|
chip->freqs_ok = 0;
|
|
|
|
for (l /= sizeof(int); l > 0; --l) {
|
|
|
|
unsigned int r = *prop++;
|
|
|
|
/* Apple 'Fixed' format */
|
|
|
|
if (r >= 0x10000)
|
|
|
|
r >>= 16;
|
|
|
|
for (i = 0; i < chip->num_freqs; ++i) {
|
|
|
|
if (r == chip->freq_table[i]) {
|
|
|
|
chip->freqs_ok |= (1 << i);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* assume only 44.1khz */
|
|
|
|
chip->freqs_ok = 1;
|
|
|
|
}
|
|
|
|
|
2007-04-23 23:53:04 -04:00
|
|
|
of_node_put(sound);
|
2005-04-16 18:20:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef PMAC_SUPPORT_AUTOMUTE
|
|
|
|
/*
|
|
|
|
* auto-mute
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
static int pmac_auto_mute_get(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
2005-04-16 18:20:36 -04:00
|
|
|
ucontrol->value.integer.value[0] = chip->auto_mute;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int pmac_auto_mute_put(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (ucontrol->value.integer.value[0] != chip->auto_mute) {
|
2007-11-15 10:14:12 -05:00
|
|
|
chip->auto_mute = !!ucontrol->value.integer.value[0];
|
2005-04-16 18:20:36 -04:00
|
|
|
if (chip->update_automute)
|
|
|
|
chip->update_automute(chip, 1);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static int pmac_hp_detect_get(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (chip->detect_headphone)
|
|
|
|
ucontrol->value.integer.value[0] = chip->detect_headphone(chip);
|
|
|
|
else
|
|
|
|
ucontrol->value.integer.value[0] = 0;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
static struct snd_kcontrol_new auto_mute_controls[] __initdata = {
|
2005-04-16 18:20:36 -04:00
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Auto Mute Switch",
|
|
|
|
.info = snd_pmac_boolean_mono_info,
|
|
|
|
.get = pmac_auto_mute_get,
|
|
|
|
.put = pmac_auto_mute_put,
|
|
|
|
},
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Headphone Detection",
|
|
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ,
|
|
|
|
.info = snd_pmac_boolean_mono_info,
|
|
|
|
.get = pmac_hp_detect_get,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2005-11-17 09:09:46 -05:00
|
|
|
int __init snd_pmac_add_automute(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
int err;
|
|
|
|
chip->auto_mute = 1;
|
|
|
|
err = snd_ctl_add(chip->card, snd_ctl_new1(&auto_mute_controls[0], chip));
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
if (err < 0) {
|
|
|
|
printk(KERN_ERR "snd-powermac: Failed to add automute control\n");
|
2005-04-16 18:20:36 -04:00
|
|
|
return err;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
chip->hp_detect_ctl = snd_ctl_new1(&auto_mute_controls[1], chip);
|
|
|
|
return snd_ctl_add(chip->card, chip->hp_detect_ctl);
|
|
|
|
}
|
|
|
|
#endif /* PMAC_SUPPORT_AUTOMUTE */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* create and detect a pmac chip record
|
|
|
|
*/
|
2005-11-17 09:09:46 -05:00
|
|
|
int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
2005-11-17 09:09:46 -05:00
|
|
|
struct snd_pmac *chip;
|
2005-04-16 18:20:36 -04:00
|
|
|
struct device_node *np;
|
|
|
|
int i, err;
|
2006-07-03 07:36:01 -04:00
|
|
|
unsigned int irq;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
unsigned long ctrl_addr, txdma_addr, rxdma_addr;
|
2005-11-17 09:09:46 -05:00
|
|
|
static struct snd_device_ops ops = {
|
2005-04-16 18:20:36 -04:00
|
|
|
.dev_free = snd_pmac_dev_free,
|
|
|
|
};
|
|
|
|
|
|
|
|
*chip_return = NULL;
|
|
|
|
|
[ALSA] Replace with kzalloc() - others
Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3
OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers
AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver
SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth
USB generic driver,USB USX2Y
Replace kcalloc(1,..) with kzalloc().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-09 08:22:34 -04:00
|
|
|
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (chip == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
chip->card = card;
|
|
|
|
|
|
|
|
spin_lock_init(&chip->reg_lock);
|
|
|
|
chip->irq = chip->tx_irq = chip->rx_irq = -1;
|
|
|
|
|
|
|
|
chip->playback.stream = SNDRV_PCM_STREAM_PLAYBACK;
|
|
|
|
chip->capture.stream = SNDRV_PCM_STREAM_CAPTURE;
|
|
|
|
|
|
|
|
if ((err = snd_pmac_detect(chip)) < 0)
|
|
|
|
goto __error;
|
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
if (snd_pmac_dbdma_alloc(chip, &chip->playback.cmd, PMAC_MAX_FRAGS + 1) < 0 ||
|
|
|
|
snd_pmac_dbdma_alloc(chip, &chip->capture.cmd, PMAC_MAX_FRAGS + 1) < 0 ||
|
2008-01-16 09:57:08 -05:00
|
|
|
snd_pmac_dbdma_alloc(chip, &chip->extra_dma, 2) < 0 ||
|
|
|
|
snd_pmac_dbdma_alloc(chip, &emergency_dbdma, 2) < 0) {
|
2005-04-16 18:20:36 -04:00
|
|
|
err = -ENOMEM;
|
|
|
|
goto __error;
|
|
|
|
}
|
|
|
|
|
|
|
|
np = chip->node;
|
2005-12-13 02:01:21 -05:00
|
|
|
chip->requested = 0;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
if (chip->is_k2) {
|
2005-12-13 02:01:21 -05:00
|
|
|
static char *rnames[] = {
|
|
|
|
"Sound Control", "Sound DMA" };
|
|
|
|
for (i = 0; i < 2; i ++) {
|
|
|
|
if (of_address_to_resource(np->parent, i,
|
|
|
|
&chip->rsrc[i])) {
|
|
|
|
printk(KERN_ERR "snd: can't translate rsrc "
|
|
|
|
" %d (%s)\n", i, rnames[i]);
|
|
|
|
err = -ENODEV;
|
|
|
|
goto __error;
|
|
|
|
}
|
|
|
|
if (request_mem_region(chip->rsrc[i].start,
|
|
|
|
chip->rsrc[i].end -
|
|
|
|
chip->rsrc[i].start + 1,
|
|
|
|
rnames[i]) == NULL) {
|
|
|
|
printk(KERN_ERR "snd: can't request rsrc "
|
2006-07-01 21:55:03 -04:00
|
|
|
" %d (%s: 0x%016llx:%016llx)\n",
|
2006-06-12 17:50:27 -04:00
|
|
|
i, rnames[i],
|
|
|
|
(unsigned long long)chip->rsrc[i].start,
|
|
|
|
(unsigned long long)chip->rsrc[i].end);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
err = -ENODEV;
|
|
|
|
goto __error;
|
|
|
|
}
|
2005-12-13 02:01:21 -05:00
|
|
|
chip->requested |= (1 << i);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
}
|
2005-12-13 02:01:21 -05:00
|
|
|
ctrl_addr = chip->rsrc[0].start;
|
|
|
|
txdma_addr = chip->rsrc[1].start;
|
|
|
|
rxdma_addr = txdma_addr + 0x100;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
} else {
|
2005-12-13 02:01:21 -05:00
|
|
|
static char *rnames[] = {
|
|
|
|
"Sound Control", "Sound Tx DMA", "Sound Rx DMA" };
|
|
|
|
for (i = 0; i < 3; i ++) {
|
2006-02-01 06:04:43 -05:00
|
|
|
if (of_address_to_resource(np, i,
|
2005-12-13 02:01:21 -05:00
|
|
|
&chip->rsrc[i])) {
|
|
|
|
printk(KERN_ERR "snd: can't translate rsrc "
|
|
|
|
" %d (%s)\n", i, rnames[i]);
|
|
|
|
err = -ENODEV;
|
|
|
|
goto __error;
|
|
|
|
}
|
|
|
|
if (request_mem_region(chip->rsrc[i].start,
|
|
|
|
chip->rsrc[i].end -
|
|
|
|
chip->rsrc[i].start + 1,
|
|
|
|
rnames[i]) == NULL) {
|
|
|
|
printk(KERN_ERR "snd: can't request rsrc "
|
2006-06-12 17:50:27 -04:00
|
|
|
" %d (%s: 0x%016llx:%016llx)\n",
|
|
|
|
i, rnames[i],
|
|
|
|
(unsigned long long)chip->rsrc[i].start,
|
|
|
|
(unsigned long long)chip->rsrc[i].end);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
err = -ENODEV;
|
|
|
|
goto __error;
|
|
|
|
}
|
2005-12-13 02:01:21 -05:00
|
|
|
chip->requested |= (1 << i);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
}
|
2005-12-13 02:01:21 -05:00
|
|
|
ctrl_addr = chip->rsrc[0].start;
|
|
|
|
txdma_addr = chip->rsrc[1].start;
|
|
|
|
rxdma_addr = chip->rsrc[2].start;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:32 -04:00
|
|
|
chip->awacs = ioremap(ctrl_addr, 0x1000);
|
|
|
|
chip->playback.dma = ioremap(txdma_addr, 0x100);
|
|
|
|
chip->capture.dma = ioremap(rxdma_addr, 0x100);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (chip->model <= PMAC_BURGUNDY) {
|
2006-07-03 07:36:01 -04:00
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
|
|
if (request_irq(irq, snd_pmac_ctrl_intr, 0,
|
2005-04-16 18:20:36 -04:00
|
|
|
"PMac", (void*)chip)) {
|
2006-07-03 07:36:01 -04:00
|
|
|
snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n",
|
|
|
|
irq);
|
2005-04-16 18:20:36 -04:00
|
|
|
err = -EBUSY;
|
|
|
|
goto __error;
|
|
|
|
}
|
2006-07-03 07:36:01 -04:00
|
|
|
chip->irq = irq;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
2006-07-03 07:36:01 -04:00
|
|
|
irq = irq_of_parse_and_map(np, 1);
|
|
|
|
if (request_irq(irq, snd_pmac_tx_intr, 0, "PMac Output", (void*)chip)){
|
|
|
|
snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", irq);
|
2005-04-16 18:20:36 -04:00
|
|
|
err = -EBUSY;
|
|
|
|
goto __error;
|
|
|
|
}
|
2006-07-03 07:36:01 -04:00
|
|
|
chip->tx_irq = irq;
|
|
|
|
irq = irq_of_parse_and_map(np, 2);
|
|
|
|
if (request_irq(irq, snd_pmac_rx_intr, 0, "PMac Input", (void*)chip)) {
|
|
|
|
snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", irq);
|
2005-04-16 18:20:36 -04:00
|
|
|
err = -EBUSY;
|
|
|
|
goto __error;
|
|
|
|
}
|
2006-07-03 07:36:01 -04:00
|
|
|
chip->rx_irq = irq;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
snd_pmac_sound_feature(chip, 1);
|
|
|
|
|
2008-04-16 07:15:38 -04:00
|
|
|
/* reset & enable interrupts */
|
|
|
|
if (chip->model <= PMAC_BURGUNDY)
|
|
|
|
out_le32(&chip->awacs->control, chip->control_mask);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/* Powerbooks have odd ways of enabling inputs such as
|
|
|
|
an expansion-bay CD or sound from an internal modem
|
|
|
|
or a PC-card modem. */
|
|
|
|
if (chip->is_pbook_3400) {
|
|
|
|
/* Enable CD and PC-card sound inputs. */
|
|
|
|
/* This is done by reading from address
|
|
|
|
* f301a000, + 0x10 to enable the expansion-bay
|
|
|
|
* CD sound input, + 0x80 to enable the PC-card
|
|
|
|
* sound input. The 0x100 enables the SCSI bus
|
|
|
|
* terminator power.
|
|
|
|
*/
|
|
|
|
chip->latch_base = ioremap (0xf301a000, 0x1000);
|
|
|
|
in_8(chip->latch_base + 0x190);
|
|
|
|
} else if (chip->is_pbook_G3) {
|
|
|
|
struct device_node* mio;
|
|
|
|
for (mio = chip->node->parent; mio; mio = mio->parent) {
|
2005-12-13 02:01:21 -05:00
|
|
|
if (strcmp(mio->name, "mac-io") == 0) {
|
|
|
|
struct resource r;
|
|
|
|
if (of_address_to_resource(mio, 0, &r) == 0)
|
|
|
|
chip->macio_base =
|
|
|
|
ioremap(r.start, 0x40);
|
2005-04-16 18:20:36 -04:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Enable CD sound input. */
|
|
|
|
/* The relevant bits for writing to this byte are 0x8f.
|
|
|
|
* I haven't found out what the 0x80 bit does.
|
|
|
|
* For the 0xf bits, writing 3 or 7 enables the CD
|
|
|
|
* input, any other value disables it. Values
|
|
|
|
* 1, 3, 5, 7 enable the microphone. Values 0, 2,
|
|
|
|
* 4, 6, 8 - f enable the input from the modem.
|
|
|
|
*/
|
|
|
|
if (chip->macio_base)
|
|
|
|
out_8(chip->macio_base + 0x37, 3);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset dbdma channels */
|
|
|
|
snd_pmac_dbdma_reset(chip);
|
|
|
|
|
|
|
|
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0)
|
|
|
|
goto __error;
|
|
|
|
|
|
|
|
*chip_return = chip;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
__error:
|
|
|
|
snd_pmac_free(chip);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* sleep notify for powerbook
|
|
|
|
*/
|
|
|
|
|
2005-06-27 17:36:34 -04:00
|
|
|
#ifdef CONFIG_PM
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Save state when going to sleep, restore it afterwards.
|
|
|
|
*/
|
|
|
|
|
2005-11-17 11:17:08 -05:00
|
|
|
void snd_pmac_suspend(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
2005-11-17 11:17:08 -05:00
|
|
|
snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
|
2005-04-16 18:20:36 -04:00
|
|
|
if (chip->suspend)
|
|
|
|
chip->suspend(chip);
|
|
|
|
snd_pcm_suspend_all(chip->pcm);
|
|
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
snd_pmac_beep_stop(chip);
|
|
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
if (chip->irq >= 0)
|
|
|
|
disable_irq(chip->irq);
|
|
|
|
if (chip->tx_irq >= 0)
|
|
|
|
disable_irq(chip->tx_irq);
|
|
|
|
if (chip->rx_irq >= 0)
|
|
|
|
disable_irq(chip->rx_irq);
|
|
|
|
snd_pmac_sound_feature(chip, 0);
|
|
|
|
}
|
|
|
|
|
2005-11-17 11:17:08 -05:00
|
|
|
void snd_pmac_resume(struct snd_pmac *chip)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
snd_pmac_sound_feature(chip, 1);
|
|
|
|
if (chip->resume)
|
|
|
|
chip->resume(chip);
|
|
|
|
/* enable CD sound input */
|
2005-11-17 11:17:08 -05:00
|
|
|
if (chip->macio_base && chip->is_pbook_G3)
|
2005-04-16 18:20:36 -04:00
|
|
|
out_8(chip->macio_base + 0x37, 3);
|
2005-11-17 11:17:08 -05:00
|
|
|
else if (chip->is_pbook_3400)
|
2005-04-16 18:20:36 -04:00
|
|
|
in_8(chip->latch_base + 0x190);
|
|
|
|
|
|
|
|
snd_pmac_pcm_set_format(chip);
|
|
|
|
|
|
|
|
if (chip->irq >= 0)
|
|
|
|
enable_irq(chip->irq);
|
|
|
|
if (chip->tx_irq >= 0)
|
|
|
|
enable_irq(chip->tx_irq);
|
|
|
|
if (chip->rx_irq >= 0)
|
|
|
|
enable_irq(chip->rx_irq);
|
|
|
|
|
2005-11-17 11:17:08 -05:00
|
|
|
snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2005-06-27 17:36:34 -04:00
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|