2005-04-16 18:20:36 -04:00
|
|
|
#ifndef _LINUX_SIGNAL_H
|
|
|
|
#define _LINUX_SIGNAL_H
|
|
|
|
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/signal.h>
|
|
|
|
#include <asm/siginfo.h>
|
|
|
|
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
|
2005-05-01 11:59:02 -04:00
|
|
|
/*
|
|
|
|
* These values of sa_flags are used only by the kernel as part of the
|
|
|
|
* irq handling routines.
|
|
|
|
*
|
|
|
|
* SA_INTERRUPT is also used by the irq handling routines.
|
|
|
|
* SA_SHIRQ is for shared interrupt support on PCI and EISA.
|
|
|
|
*/
|
|
|
|
#define SA_PROBE SA_ONESHOT
|
|
|
|
#define SA_SAMPLE_RANDOM SA_RESTART
|
|
|
|
#define SA_SHIRQ 0x04000000
|
[PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels. For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.
Currently, ARM drivers do (eg) the following:
err = request_irq(irq, ...);
set_irq_type(irq, IRQT_RISING);
However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.
Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt. The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.
Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like. The IRQ controller code should do its
best to select the most appropriate supported mode.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 04:02:07 -05:00
|
|
|
/*
|
|
|
|
* As above, these correspond to the IORESOURCE_IRQ_* defines in
|
|
|
|
* linux/ioport.h to select the interrupt line behaviour. When
|
|
|
|
* requesting an interrupt without specifying a SA_TRIGGER, the
|
|
|
|
* setting should be assumed to be "as already configured", which
|
|
|
|
* may be as per machine or firmware initialisation.
|
|
|
|
*/
|
|
|
|
#define SA_TRIGGER_LOW 0x00000008
|
|
|
|
#define SA_TRIGGER_HIGH 0x00000004
|
|
|
|
#define SA_TRIGGER_FALLING 0x00000002
|
|
|
|
#define SA_TRIGGER_RISING 0x00000001
|
|
|
|
#define SA_TRIGGER_MASK (SA_TRIGGER_HIGH|SA_TRIGGER_LOW|\
|
|
|
|
SA_TRIGGER_RISING|SA_TRIGGER_FALLING)
|
2005-05-01 11:59:02 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* Real Time signals may be queued.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct sigqueue {
|
|
|
|
struct list_head list;
|
|
|
|
int flags;
|
|
|
|
siginfo_t info;
|
|
|
|
struct user_struct *user;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* flags values. */
|
|
|
|
#define SIGQUEUE_PREALLOC 1
|
|
|
|
|
|
|
|
struct sigpending {
|
|
|
|
struct list_head list;
|
|
|
|
sigset_t signal;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Define some primitives to manipulate sigset_t.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __HAVE_ARCH_SIG_BITOPS
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
|
|
|
|
/* We don't use <linux/bitops.h> for these because there is no need to
|
|
|
|
be atomic. */
|
|
|
|
static inline void sigaddset(sigset_t *set, int _sig)
|
|
|
|
{
|
|
|
|
unsigned long sig = _sig - 1;
|
|
|
|
if (_NSIG_WORDS == 1)
|
|
|
|
set->sig[0] |= 1UL << sig;
|
|
|
|
else
|
|
|
|
set->sig[sig / _NSIG_BPW] |= 1UL << (sig % _NSIG_BPW);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void sigdelset(sigset_t *set, int _sig)
|
|
|
|
{
|
|
|
|
unsigned long sig = _sig - 1;
|
|
|
|
if (_NSIG_WORDS == 1)
|
|
|
|
set->sig[0] &= ~(1UL << sig);
|
|
|
|
else
|
|
|
|
set->sig[sig / _NSIG_BPW] &= ~(1UL << (sig % _NSIG_BPW));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int sigismember(sigset_t *set, int _sig)
|
|
|
|
{
|
|
|
|
unsigned long sig = _sig - 1;
|
|
|
|
if (_NSIG_WORDS == 1)
|
|
|
|
return 1 & (set->sig[0] >> sig);
|
|
|
|
else
|
|
|
|
return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int sigfindinword(unsigned long word)
|
|
|
|
{
|
|
|
|
return ffz(~word);
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* __HAVE_ARCH_SIG_BITOPS */
|
|
|
|
|
2006-01-08 04:02:48 -05:00
|
|
|
static inline int sigisemptyset(sigset_t *set)
|
|
|
|
{
|
|
|
|
extern void _NSIG_WORDS_is_unsupported_size(void);
|
|
|
|
switch (_NSIG_WORDS) {
|
|
|
|
case 4:
|
|
|
|
return (set->sig[3] | set->sig[2] |
|
|
|
|
set->sig[1] | set->sig[0]) == 0;
|
|
|
|
case 2:
|
|
|
|
return (set->sig[1] | set->sig[0]) == 0;
|
|
|
|
case 1:
|
|
|
|
return set->sig[0] == 0;
|
|
|
|
default:
|
|
|
|
_NSIG_WORDS_is_unsupported_size();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
#define sigmask(sig) (1UL << ((sig) - 1))
|
|
|
|
|
|
|
|
#ifndef __HAVE_ARCH_SIG_SETOPS
|
|
|
|
#include <linux/string.h>
|
|
|
|
|
|
|
|
#define _SIG_SET_BINOP(name, op) \
|
|
|
|
static inline void name(sigset_t *r, const sigset_t *a, const sigset_t *b) \
|
|
|
|
{ \
|
|
|
|
extern void _NSIG_WORDS_is_unsupported_size(void); \
|
|
|
|
unsigned long a0, a1, a2, a3, b0, b1, b2, b3; \
|
|
|
|
\
|
|
|
|
switch (_NSIG_WORDS) { \
|
|
|
|
case 4: \
|
|
|
|
a3 = a->sig[3]; a2 = a->sig[2]; \
|
|
|
|
b3 = b->sig[3]; b2 = b->sig[2]; \
|
|
|
|
r->sig[3] = op(a3, b3); \
|
|
|
|
r->sig[2] = op(a2, b2); \
|
|
|
|
case 2: \
|
|
|
|
a1 = a->sig[1]; b1 = b->sig[1]; \
|
|
|
|
r->sig[1] = op(a1, b1); \
|
|
|
|
case 1: \
|
|
|
|
a0 = a->sig[0]; b0 = b->sig[0]; \
|
|
|
|
r->sig[0] = op(a0, b0); \
|
|
|
|
break; \
|
|
|
|
default: \
|
|
|
|
_NSIG_WORDS_is_unsupported_size(); \
|
|
|
|
} \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define _sig_or(x,y) ((x) | (y))
|
|
|
|
_SIG_SET_BINOP(sigorsets, _sig_or)
|
|
|
|
|
|
|
|
#define _sig_and(x,y) ((x) & (y))
|
|
|
|
_SIG_SET_BINOP(sigandsets, _sig_and)
|
|
|
|
|
|
|
|
#define _sig_nand(x,y) ((x) & ~(y))
|
|
|
|
_SIG_SET_BINOP(signandsets, _sig_nand)
|
|
|
|
|
|
|
|
#undef _SIG_SET_BINOP
|
|
|
|
#undef _sig_or
|
|
|
|
#undef _sig_and
|
|
|
|
#undef _sig_nand
|
|
|
|
|
|
|
|
#define _SIG_SET_OP(name, op) \
|
|
|
|
static inline void name(sigset_t *set) \
|
|
|
|
{ \
|
|
|
|
extern void _NSIG_WORDS_is_unsupported_size(void); \
|
|
|
|
\
|
|
|
|
switch (_NSIG_WORDS) { \
|
|
|
|
case 4: set->sig[3] = op(set->sig[3]); \
|
|
|
|
set->sig[2] = op(set->sig[2]); \
|
|
|
|
case 2: set->sig[1] = op(set->sig[1]); \
|
|
|
|
case 1: set->sig[0] = op(set->sig[0]); \
|
|
|
|
break; \
|
|
|
|
default: \
|
|
|
|
_NSIG_WORDS_is_unsupported_size(); \
|
|
|
|
} \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define _sig_not(x) (~(x))
|
|
|
|
_SIG_SET_OP(signotset, _sig_not)
|
|
|
|
|
|
|
|
#undef _SIG_SET_OP
|
|
|
|
#undef _sig_not
|
|
|
|
|
|
|
|
static inline void sigemptyset(sigset_t *set)
|
|
|
|
{
|
|
|
|
switch (_NSIG_WORDS) {
|
|
|
|
default:
|
|
|
|
memset(set, 0, sizeof(sigset_t));
|
|
|
|
break;
|
|
|
|
case 2: set->sig[1] = 0;
|
|
|
|
case 1: set->sig[0] = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void sigfillset(sigset_t *set)
|
|
|
|
{
|
|
|
|
switch (_NSIG_WORDS) {
|
|
|
|
default:
|
|
|
|
memset(set, -1, sizeof(sigset_t));
|
|
|
|
break;
|
|
|
|
case 2: set->sig[1] = -1;
|
|
|
|
case 1: set->sig[0] = -1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Some extensions for manipulating the low 32 signals in particular. */
|
|
|
|
|
|
|
|
static inline void sigaddsetmask(sigset_t *set, unsigned long mask)
|
|
|
|
{
|
|
|
|
set->sig[0] |= mask;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void sigdelsetmask(sigset_t *set, unsigned long mask)
|
|
|
|
{
|
|
|
|
set->sig[0] &= ~mask;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int sigtestsetmask(sigset_t *set, unsigned long mask)
|
|
|
|
{
|
|
|
|
return (set->sig[0] & mask) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void siginitset(sigset_t *set, unsigned long mask)
|
|
|
|
{
|
|
|
|
set->sig[0] = mask;
|
|
|
|
switch (_NSIG_WORDS) {
|
|
|
|
default:
|
|
|
|
memset(&set->sig[1], 0, sizeof(long)*(_NSIG_WORDS-1));
|
|
|
|
break;
|
|
|
|
case 2: set->sig[1] = 0;
|
|
|
|
case 1: ;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void siginitsetinv(sigset_t *set, unsigned long mask)
|
|
|
|
{
|
|
|
|
set->sig[0] = ~mask;
|
|
|
|
switch (_NSIG_WORDS) {
|
|
|
|
default:
|
|
|
|
memset(&set->sig[1], -1, sizeof(long)*(_NSIG_WORDS-1));
|
|
|
|
break;
|
|
|
|
case 2: set->sig[1] = -1;
|
|
|
|
case 1: ;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* __HAVE_ARCH_SIG_SETOPS */
|
|
|
|
|
|
|
|
static inline void init_sigpending(struct sigpending *sig)
|
|
|
|
{
|
|
|
|
sigemptyset(&sig->signal);
|
|
|
|
INIT_LIST_HEAD(&sig->list);
|
|
|
|
}
|
|
|
|
|
2005-05-01 11:59:13 -04:00
|
|
|
/* Test if 'sig' is valid signal. Use this instead of testing _NSIG directly */
|
|
|
|
static inline int valid_signal(unsigned long sig)
|
|
|
|
{
|
|
|
|
return sig <= _NSIG ? 1 : 0;
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
|
|
|
|
extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
|
|
|
|
extern long do_sigpending(void __user *, unsigned long);
|
|
|
|
extern int sigprocmask(int, sigset_t *, sigset_t *);
|
|
|
|
|
|
|
|
struct pt_regs;
|
|
|
|
extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
|
|
|
|
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
|
|
|
|
#endif /* _LINUX_SIGNAL_H */
|