android_kernel_xiaomi_sm8350/net/mac80211/sta_info.h

418 lines
12 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Devicescape Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef STA_INFO_H
#define STA_INFO_H
#include <linux/list.h>
#include <linux/types.h>
#include <linux/if_ether.h>
#include "key.h"
/**
* enum ieee80211_sta_info_flags - Stations flags
*
* These flags are used with &struct sta_info's @flags member.
*
* @WLAN_STA_AUTH: Station is authenticated.
* @WLAN_STA_ASSOC: Station is associated.
* @WLAN_STA_PS: Station is in power-save mode
* @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic.
* This bit is always checked so needs to be enabled for all stations
* when virtual port control is not in use.
* @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
* frames.
* @WLAN_STA_ASSOC_AP: We're associated to that station, it is an AP.
* @WLAN_STA_WME: Station is a QoS-STA.
* @WLAN_STA_WDS: Station is one of our WDS peers.
* @WLAN_STA_PSPOLL: Station has just PS-polled us.
* @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
* IEEE80211_TXCTL_CLEAR_PS_FILT control flag) when the next
* frame to this station is transmitted.
*/
enum ieee80211_sta_info_flags {
WLAN_STA_AUTH = 1<<0,
WLAN_STA_ASSOC = 1<<1,
WLAN_STA_PS = 1<<2,
WLAN_STA_AUTHORIZED = 1<<3,
WLAN_STA_SHORT_PREAMBLE = 1<<4,
WLAN_STA_ASSOC_AP = 1<<5,
WLAN_STA_WME = 1<<6,
WLAN_STA_WDS = 1<<7,
WLAN_STA_PSPOLL = 1<<8,
WLAN_STA_CLEAR_PS_FILT = 1<<9,
};
#define STA_TID_NUM 16
#define ADDBA_RESP_INTERVAL HZ
#define HT_AGG_MAX_RETRIES (0x3)
#define HT_AGG_STATE_INITIATOR_SHIFT (4)
#define HT_ADDBA_REQUESTED_MSK BIT(0)
#define HT_ADDBA_DRV_READY_MSK BIT(1)
#define HT_ADDBA_RECEIVED_MSK BIT(2)
#define HT_AGG_STATE_REQ_STOP_BA_MSK BIT(3)
#define HT_AGG_STATE_INITIATOR_MSK BIT(HT_AGG_STATE_INITIATOR_SHIFT)
#define HT_AGG_STATE_IDLE (0x0)
#define HT_AGG_STATE_OPERATIONAL (HT_ADDBA_REQUESTED_MSK | \
HT_ADDBA_DRV_READY_MSK | \
HT_ADDBA_RECEIVED_MSK)
#define HT_AGG_STATE_DEBUGFS_CTL BIT(7)
/**
* struct tid_ampdu_tx - TID aggregation information (Tx).
*
* @addba_resp_timer: timer for peer's response to addba request
* @ssn: Starting Sequence Number expected to be aggregated.
* @dialog_token: dialog token for aggregation session
*/
struct tid_ampdu_tx {
struct timer_list addba_resp_timer;
u16 ssn;
u8 dialog_token;
};
/**
* struct tid_ampdu_rx - TID aggregation information (Rx).
*
* @reorder_buf: buffer to reorder incoming aggregated MPDUs
* @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
* @head_seq_num: head sequence number in reordering buffer.
* @stored_mpdu_num: number of MPDUs in reordering buffer
* @ssn: Starting Sequence Number expected to be aggregated.
* @buf_size: buffer size for incoming A-MPDUs
* @timeout: reset timer value.
* @dialog_token: dialog token for aggregation session
*/
struct tid_ampdu_rx {
struct sk_buff **reorder_buf;
struct timer_list session_timer;
u16 head_seq_num;
u16 stored_mpdu_num;
u16 ssn;
u16 buf_size;
u16 timeout;
u8 dialog_token;
};
/**
* enum plink_state - state of a mesh peer link finite state machine
*
* @PLINK_LISTEN: initial state, considered the implicit state of non existant
* mesh peer links
* @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh peer
* @PLINK_OPN_RCVD: mesh plink open frame has been received from this mesh peer
* @PLINK_CNF_RCVD: mesh plink confirm frame has been received from this mesh
* peer
* @PLINK_ESTAB: mesh peer link is established
* @PLINK_HOLDING: mesh peer link is being closed or cancelled
* @PLINK_BLOCKED: all frames transmitted from this mesh plink are discarded
*/
enum plink_state {
PLINK_LISTEN,
PLINK_OPN_SNT,
PLINK_OPN_RCVD,
PLINK_CNF_RCVD,
PLINK_ESTAB,
PLINK_HOLDING,
PLINK_BLOCKED
};
/**
* struct sta_ampdu_mlme - STA aggregation information.
*
* @tid_state_rx: TID's state in Rx session state machine.
* @tid_rx: aggregation info for Rx per TID
* @tid_state_tx: TID's state in Tx session state machine.
* @tid_tx: aggregation info for Tx per TID
* @addba_req_num: number of times addBA request has been sent.
* @dialog_token_allocator: dialog token enumerator for each new session;
*/
struct sta_ampdu_mlme {
/* rx */
u8 tid_state_rx[STA_TID_NUM];
struct tid_ampdu_rx *tid_rx[STA_TID_NUM];
/* tx */
u8 tid_state_tx[STA_TID_NUM];
struct tid_ampdu_tx *tid_tx[STA_TID_NUM];
u8 addba_req_num[STA_TID_NUM];
u8 dialog_token_allocator;
};
/* see __sta_info_unlink */
#define STA_INFO_PIN_STAT_NORMAL 0
#define STA_INFO_PIN_STAT_PINNED 1
#define STA_INFO_PIN_STAT_DESTROY 2
/**
* struct sta_info - STA information
*
* This structure collects information about a station that
* mac80211 is communicating with.
*
* @list: global linked list entry
* @hnext: hash table linked list pointer
* @local: pointer to the global information
* @addr: MAC address of this STA
* @aid: STA's unique AID (1..2007, 0 = not assigned yet),
* only used in AP (and IBSS?) mode
* @flags: STA flags, see &enum ieee80211_sta_info_flags
* @ps_tx_buf: buffer of frames to transmit to this station
* when it leaves power saving state
* @tx_filtered: buffer of frames we already tried to transmit
* but were filtered by hardware due to STA having entered
* power saving state
* @rx_packets: Number of MSDUs received from this STA
* @rx_bytes: Number of bytes received from this STA
* @supp_rates: Bitmap of supported rates (per band)
* @ht_info: HT capabilities of this STA
* @lock: used for locking all fields that require locking, see comments
* in the header file.
*/
struct sta_info {
/* General information, mostly static */
struct list_head list;
struct sta_info *hnext;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_key *key;
struct rate_control_ref *rate_ctrl;
void *rate_ctrl_priv;
spinlock_t lock;
struct ieee80211_ht_info ht_info;
u64 supp_rates[IEEE80211_NUM_BANDS];
u8 addr[ETH_ALEN];
u16 aid;
u16 listen_interval;
/*
* for use by the internal lifetime management,
* see __sta_info_unlink
*/
u8 pin_status;
/* frequently updated information, locked with lock spinlock */
u32 flags;
/*
* STA powersave frame queues, no more than the internal
* locking required.
*/
struct sk_buff_head ps_tx_buf;
struct sk_buff_head tx_filtered;
/* Updated from RX path only, no locking requirements */
unsigned long rx_packets, rx_bytes;
unsigned long wep_weak_iv_count;
unsigned long last_rx;
unsigned long num_duplicates; /* number of duplicate frames received
* from this STA */
unsigned long rx_fragments; /* number of received MPDUs */
unsigned long rx_dropped; /* number of dropped MPDUs from this STA */
int last_signal; /* signal of last received frame from this STA */
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 13:15:40 -04:00
int last_qual; /* qual of last received frame from this STA */
int last_noise; /* noise of last received frame from this STA */
/* last received seq/frag number from this STA (per RX queue) */
__le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
unsigned int wme_rx_queue[NUM_RX_DATA_QUEUES];
#endif
/* Updated from TX status path only, no locking requirements */
unsigned long tx_filtered_count;
unsigned long tx_retry_failed, tx_retry_count;
/* TODO: update in generic code not rate control? */
u32 tx_num_consecutive_failures;
u32 tx_num_mpdu_ok;
u32 tx_num_mpdu_fail;
/* moving percentage of failed MSDUs */
unsigned int fail_avg;
/* Updated from TX path only, no locking requirements */
unsigned long tx_packets; /* number of RX/TX MSDUs */
unsigned long tx_bytes;
unsigned long tx_fragments; /* number of transmitted MPDUs */
int txrate_idx;
int last_txrate_idx;
#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
unsigned int wme_tx_queue[NUM_RX_DATA_QUEUES];
#endif
/* Debug counters, no locking doesn't matter */
int channel_use;
int channel_use_raw;
/*
* Aggregation information, locked with lock.
*/
struct sta_ampdu_mlme ampdu_mlme;
u8 timer_to_tid[STA_TID_NUM]; /* identity mapping to ID timers */
u8 tid_to_tx_q[STA_TID_NUM]; /* map tid to tx queue */
#ifdef CONFIG_MAC80211_MESH
/*
* Mesh peer link attributes
* TODO: move to a sub-structure that is referenced with pointer?
*/
__le16 llid; /* Local link ID */
__le16 plid; /* Peer link ID */
__le16 reason; /* Cancel reason on PLINK_HOLDING state */
u8 plink_retries; /* Retries in establishment */
bool ignore_plink_timer;
enum plink_state plink_state;
u32 plink_timeout;
struct timer_list plink_timer;
#endif
#ifdef CONFIG_MAC80211_DEBUGFS
struct sta_info_debugfsdentries {
struct dentry *dir;
struct dentry *flags;
struct dentry *num_ps_buf_frames;
struct dentry *inactive_ms;
struct dentry *last_seq_ctrl;
#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
struct dentry *wme_rx_queue;
struct dentry *wme_tx_queue;
#endif
struct dentry *agg_status;
} debugfs;
#endif
};
static inline enum plink_state sta_plink_state(struct sta_info *sta)
{
#ifdef CONFIG_MAC80211_MESH
return sta->plink_state;
#endif
return PLINK_LISTEN;
}
static inline void set_sta_flags(struct sta_info *sta, const u32 flags)
{
spin_lock_bh(&sta->lock);
sta->flags |= flags;
spin_unlock_bh(&sta->lock);
}
static inline void clear_sta_flags(struct sta_info *sta, const u32 flags)
{
spin_lock_bh(&sta->lock);
sta->flags &= ~flags;
spin_unlock_bh(&sta->lock);
}
static inline void set_and_clear_sta_flags(struct sta_info *sta,
const u32 set, const u32 clear)
{
spin_lock_bh(&sta->lock);
sta->flags |= set;
sta->flags &= ~clear;
spin_unlock_bh(&sta->lock);
}
static inline u32 test_sta_flags(struct sta_info *sta, const u32 flags)
{
u32 ret;
spin_lock_bh(&sta->lock);
ret = sta->flags & flags;
spin_unlock_bh(&sta->lock);
return ret;
}
static inline u32 test_and_clear_sta_flags(struct sta_info *sta,
const u32 flags)
{
u32 ret;
spin_lock_bh(&sta->lock);
ret = sta->flags & flags;
sta->flags &= ~flags;
spin_unlock_bh(&sta->lock);
return ret;
}
static inline u32 get_sta_flags(struct sta_info *sta)
{
u32 ret;
spin_lock_bh(&sta->lock);
ret = sta->flags;
spin_unlock_bh(&sta->lock);
return ret;
}
/* Maximum number of concurrently registered stations */
#define MAX_STA_COUNT 2007
#define STA_HASH_SIZE 256
#define STA_HASH(sta) (sta[5])
/* Maximum number of frames to buffer per power saving station */
#define STA_MAX_TX_BUFFER 128
/* Minimum buffered frame expiry time. If STA uses listen interval that is
* smaller than this value, the minimum value here is used instead. */
#define STA_TX_BUFFER_EXPIRE (10 * HZ)
/* How often station data is cleaned up (e.g., expiration of buffered frames)
*/
#define STA_INFO_CLEANUP_INTERVAL (10 * HZ)
/*
* Get a STA info, must have be under RCU read lock.
*/
struct sta_info *sta_info_get(struct ieee80211_local *local, u8 *addr);
/*
* Get STA info by index, BROKEN!
*/
struct sta_info *sta_info_get_by_idx(struct ieee80211_local *local, int idx,
struct net_device *dev);
/*
* Create a new STA info, caller owns returned structure
* until sta_info_insert().
*/
struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
u8 *addr, gfp_t gfp);
/*
* Insert STA info into hash table/list, returns zero or a
* -EEXIST if (if the same MAC address is already present).
*
* Calling this without RCU protection makes the caller
* relinquish its reference to @sta.
*/
int sta_info_insert(struct sta_info *sta);
/*
* Unlink a STA info from the hash table/list.
* This can NULL the STA pointer if somebody else
* has already unlinked it.
*/
void sta_info_unlink(struct sta_info **sta);
void __sta_info_unlink(struct sta_info **sta);
void sta_info_destroy(struct sta_info *sta);
void sta_info_set_tim_bit(struct sta_info *sta);
void sta_info_clear_tim_bit(struct sta_info *sta);
void sta_info_init(struct ieee80211_local *local);
int sta_info_start(struct ieee80211_local *local);
void sta_info_stop(struct ieee80211_local *local);
int sta_info_flush(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata);
void sta_info_flush_delayed(struct ieee80211_sub_if_data *sdata);
#endif /* STA_INFO_H */