2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
* Normal mappings of chips in physical memory
|
|
|
|
*
|
|
|
|
* Copyright (C) 2003 MontaVista Software Inc.
|
|
|
|
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
|
|
|
|
*
|
|
|
|
* 031022 - [jsun] add run-time configure and partition setup
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/platform_device.h>
|
2005-04-16 18:20:36 -04:00
|
|
|
#include <linux/mtd/mtd.h>
|
|
|
|
#include <linux/mtd/map.h>
|
|
|
|
#include <linux/mtd/partitions.h>
|
2005-11-29 09:49:38 -05:00
|
|
|
#include <linux/mtd/physmap.h>
|
2008-02-01 09:26:54 -05:00
|
|
|
#include <linux/mtd/concat.h>
|
2008-11-26 05:26:29 -05:00
|
|
|
#include <linux/io.h>
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2008-02-01 09:26:54 -05:00
|
|
|
#define MAX_RESOURCES 4
|
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
struct physmap_flash_info {
|
2008-02-01 09:26:54 -05:00
|
|
|
struct mtd_info *mtd[MAX_RESOURCES];
|
|
|
|
struct mtd_info *cmtd;
|
|
|
|
struct map_info map[MAX_RESOURCES];
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
int nr_parts;
|
2009-02-11 16:12:17 -05:00
|
|
|
struct mtd_partition *parts;
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
};
|
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
static int physmap_flash_remove(struct platform_device *dev)
|
|
|
|
{
|
|
|
|
struct physmap_flash_info *info;
|
|
|
|
struct physmap_flash_data *physmap_data;
|
2008-02-01 09:26:54 -05:00
|
|
|
int i;
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
|
|
|
|
info = platform_get_drvdata(dev);
|
|
|
|
if (info == NULL)
|
|
|
|
return 0;
|
|
|
|
platform_set_drvdata(dev, NULL);
|
|
|
|
|
|
|
|
physmap_data = dev->dev.platform_data;
|
|
|
|
|
2009-03-10 15:55:55 -04:00
|
|
|
if (info->cmtd) {
|
2009-02-11 16:12:17 -05:00
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
2009-03-10 15:55:55 -04:00
|
|
|
if (info->nr_parts || physmap_data->nr_parts)
|
|
|
|
del_mtd_partitions(info->cmtd);
|
|
|
|
else
|
|
|
|
del_mtd_device(info->cmtd);
|
2009-02-11 16:12:17 -05:00
|
|
|
#else
|
2009-03-10 15:55:55 -04:00
|
|
|
del_mtd_device(info->cmtd);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
if (info->nr_parts)
|
|
|
|
kfree(info->parts);
|
2009-02-11 16:12:17 -05:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_MTD_CONCAT
|
|
|
|
if (info->cmtd != info->mtd[0])
|
2008-02-01 09:26:54 -05:00
|
|
|
mtd_concat_destroy(info->cmtd);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
for (i = 0; i < MAX_RESOURCES; i++) {
|
2009-02-11 16:12:17 -05:00
|
|
|
if (info->mtd[i] != NULL)
|
2008-02-01 09:26:54 -05:00
|
|
|
map_destroy(info->mtd[i]);
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
}
|
|
|
|
return 0;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
2008-12-16 13:22:39 -05:00
|
|
|
static const char *rom_probe_types[] = {
|
|
|
|
"cfi_probe",
|
|
|
|
"jedec_probe",
|
|
|
|
"qinfo_probe",
|
|
|
|
"map_rom",
|
|
|
|
NULL };
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
|
|
static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static int physmap_flash_probe(struct platform_device *dev)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
struct physmap_flash_data *physmap_data;
|
|
|
|
struct physmap_flash_info *info;
|
|
|
|
const char **probe_type;
|
2008-02-01 09:26:54 -05:00
|
|
|
int err = 0;
|
|
|
|
int i;
|
|
|
|
int devices_found = 0;
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
|
|
|
|
physmap_data = dev->dev.platform_data;
|
|
|
|
if (physmap_data == NULL)
|
|
|
|
return -ENODEV;
|
|
|
|
|
2008-11-26 05:26:29 -05:00
|
|
|
info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info),
|
|
|
|
GFP_KERNEL);
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
if (info == NULL) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto err_out;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
platform_set_drvdata(dev, info);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2008-02-01 09:26:54 -05:00
|
|
|
for (i = 0; i < dev->num_resources; i++) {
|
|
|
|
printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n",
|
|
|
|
(unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1),
|
|
|
|
(unsigned long long)dev->resource[i].start);
|
|
|
|
|
2008-11-26 05:26:29 -05:00
|
|
|
if (!devm_request_mem_region(&dev->dev,
|
|
|
|
dev->resource[i].start,
|
|
|
|
dev->resource[i].end - dev->resource[i].start + 1,
|
2008-12-23 05:00:14 -05:00
|
|
|
dev_name(&dev->dev))) {
|
2008-02-01 09:26:54 -05:00
|
|
|
dev_err(&dev->dev, "Could not reserve memory region\n");
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto err_out;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2008-12-23 05:00:14 -05:00
|
|
|
info->map[i].name = dev_name(&dev->dev);
|
2008-02-01 09:26:54 -05:00
|
|
|
info->map[i].phys = dev->resource[i].start;
|
|
|
|
info->map[i].size = dev->resource[i].end - dev->resource[i].start + 1;
|
|
|
|
info->map[i].bankwidth = physmap_data->width;
|
|
|
|
info->map[i].set_vpp = physmap_data->set_vpp;
|
2008-12-16 13:22:39 -05:00
|
|
|
info->map[i].pfow_base = physmap_data->pfow_base;
|
2008-02-01 09:26:54 -05:00
|
|
|
|
2008-11-26 05:26:29 -05:00
|
|
|
info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys,
|
|
|
|
info->map[i].size);
|
2008-02-01 09:26:54 -05:00
|
|
|
if (info->map[i].virt == NULL) {
|
|
|
|
dev_err(&dev->dev, "Failed to ioremap flash region\n");
|
|
|
|
err = EIO;
|
|
|
|
goto err_out;
|
|
|
|
}
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
|
2008-02-01 09:26:54 -05:00
|
|
|
simple_map_init(&info->map[i]);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2008-02-01 09:26:54 -05:00
|
|
|
probe_type = rom_probe_types;
|
|
|
|
for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
|
|
|
|
info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
|
|
|
|
if (info->mtd[i] == NULL) {
|
|
|
|
dev_err(&dev->dev, "map_probe failed\n");
|
|
|
|
err = -ENXIO;
|
|
|
|
goto err_out;
|
|
|
|
} else {
|
|
|
|
devices_found++;
|
|
|
|
}
|
|
|
|
info->mtd[i]->owner = THIS_MODULE;
|
2009-03-26 03:42:50 -04:00
|
|
|
info->mtd[i]->dev.parent = &dev->dev;
|
2008-02-01 09:26:54 -05:00
|
|
|
}
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
|
2008-02-01 09:26:54 -05:00
|
|
|
if (devices_found == 1) {
|
|
|
|
info->cmtd = info->mtd[0];
|
|
|
|
} else if (devices_found > 1) {
|
|
|
|
/*
|
|
|
|
* We detected multiple devices. Concatenate them together.
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_MTD_CONCAT
|
2008-12-23 05:00:14 -05:00
|
|
|
info->cmtd = mtd_concat_create(info->mtd, devices_found, dev_name(&dev->dev));
|
2008-02-01 09:26:54 -05:00
|
|
|
if (info->cmtd == NULL)
|
|
|
|
err = -ENXIO;
|
|
|
|
#else
|
|
|
|
printk(KERN_ERR "physmap-flash: multiple devices "
|
|
|
|
"found but MTD concat support disabled.\n");
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
err = -ENXIO;
|
2008-02-01 09:26:54 -05:00
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
2008-02-01 09:26:54 -05:00
|
|
|
if (err)
|
|
|
|
goto err_out;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
2009-02-11 16:12:17 -05:00
|
|
|
err = parse_mtd_partitions(info->cmtd, part_probe_types,
|
|
|
|
&info->parts, 0);
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
if (err > 0) {
|
2009-02-11 16:12:17 -05:00
|
|
|
add_mtd_partitions(info->cmtd, info->parts, err);
|
|
|
|
info->nr_parts = err;
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
if (physmap_data->nr_parts) {
|
|
|
|
printk(KERN_NOTICE "Using physmap partition information\n");
|
2008-02-01 09:26:54 -05:00
|
|
|
add_mtd_partitions(info->cmtd, physmap_data->parts,
|
|
|
|
physmap_data->nr_parts);
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2008-02-01 09:26:54 -05:00
|
|
|
add_mtd_device(info->cmtd);
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_out:
|
|
|
|
physmap_flash_remove(dev);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2006-09-21 17:16:48 -04:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state)
|
|
|
|
{
|
|
|
|
struct physmap_flash_info *info = platform_get_drvdata(dev);
|
|
|
|
int ret = 0;
|
2008-02-01 09:26:54 -05:00
|
|
|
int i;
|
2006-09-21 17:16:48 -04:00
|
|
|
|
2008-03-28 17:16:09 -04:00
|
|
|
for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
|
2008-07-22 03:39:01 -04:00
|
|
|
if (info->mtd[i]->suspend) {
|
|
|
|
ret = info->mtd[i]->suspend(info->mtd[i]);
|
|
|
|
if (ret)
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
|
|
for (--i; i >= 0; --i)
|
|
|
|
if (info->mtd[i]->suspend) {
|
|
|
|
BUG_ON(!info->mtd[i]->resume);
|
|
|
|
info->mtd[i]->resume(info->mtd[i]);
|
|
|
|
}
|
2006-09-21 17:16:48 -04:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int physmap_flash_resume(struct platform_device *dev)
|
|
|
|
{
|
|
|
|
struct physmap_flash_info *info = platform_get_drvdata(dev);
|
2008-02-01 09:26:54 -05:00
|
|
|
int i;
|
|
|
|
|
2008-03-28 17:16:09 -04:00
|
|
|
for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
|
2008-07-22 03:39:00 -04:00
|
|
|
if (info->mtd[i]->resume)
|
|
|
|
info->mtd[i]->resume(info->mtd[i]);
|
2008-03-28 17:16:09 -04:00
|
|
|
|
2006-09-21 17:16:48 -04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void physmap_flash_shutdown(struct platform_device *dev)
|
|
|
|
{
|
|
|
|
struct physmap_flash_info *info = platform_get_drvdata(dev);
|
2008-02-01 09:26:54 -05:00
|
|
|
int i;
|
|
|
|
|
2008-03-28 17:16:09 -04:00
|
|
|
for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
|
2008-07-22 03:39:00 -04:00
|
|
|
if (info->mtd[i]->suspend && info->mtd[i]->resume)
|
|
|
|
if (info->mtd[i]->suspend(info->mtd[i]) == 0)
|
|
|
|
info->mtd[i]->resume(info->mtd[i]);
|
2006-09-21 17:16:48 -04:00
|
|
|
}
|
2008-02-03 15:56:03 -05:00
|
|
|
#else
|
|
|
|
#define physmap_flash_suspend NULL
|
|
|
|
#define physmap_flash_resume NULL
|
|
|
|
#define physmap_flash_shutdown NULL
|
2006-09-21 17:16:48 -04:00
|
|
|
#endif
|
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
static struct platform_driver physmap_flash_driver = {
|
|
|
|
.probe = physmap_flash_probe,
|
|
|
|
.remove = physmap_flash_remove,
|
2006-09-21 17:16:48 -04:00
|
|
|
.suspend = physmap_flash_suspend,
|
|
|
|
.resume = physmap_flash_resume,
|
|
|
|
.shutdown = physmap_flash_shutdown,
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
.driver = {
|
|
|
|
.name = "physmap-flash",
|
2008-04-18 16:44:26 -04:00
|
|
|
.owner = THIS_MODULE,
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
},
|
|
|
|
};
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
2008-12-01 17:23:40 -05:00
|
|
|
#ifdef CONFIG_MTD_PHYSMAP_COMPAT
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
static struct physmap_flash_data physmap_flash_data = {
|
|
|
|
.width = CONFIG_MTD_PHYSMAP_BANKWIDTH,
|
|
|
|
};
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
static struct resource physmap_flash_resource = {
|
|
|
|
.start = CONFIG_MTD_PHYSMAP_START,
|
2006-06-27 09:38:15 -04:00
|
|
|
.end = CONFIG_MTD_PHYSMAP_START + CONFIG_MTD_PHYSMAP_LEN - 1,
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
};
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
static struct platform_device physmap_flash = {
|
|
|
|
.name = "physmap-flash",
|
|
|
|
.id = 0,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &physmap_flash_data,
|
|
|
|
},
|
|
|
|
.num_resources = 1,
|
|
|
|
.resource = &physmap_flash_resource,
|
|
|
|
};
|
|
|
|
|
|
|
|
void physmap_configure(unsigned long addr, unsigned long size,
|
|
|
|
int bankwidth, void (*set_vpp)(struct map_info *, int))
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
physmap_flash_resource.start = addr;
|
|
|
|
physmap_flash_resource.end = addr + size - 1;
|
|
|
|
physmap_flash_data.width = bankwidth;
|
|
|
|
physmap_flash_data.set_vpp = set_vpp;
|
|
|
|
}
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
|
|
|
|
{
|
|
|
|
physmap_flash_data.nr_parts = num_parts;
|
|
|
|
physmap_flash_data.parts = parts;
|
|
|
|
}
|
|
|
|
#endif
|
2005-04-16 18:20:36 -04:00
|
|
|
#endif
|
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
static int __init physmap_init(void)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = platform_driver_register(&physmap_flash_driver);
|
2008-12-01 17:23:40 -05:00
|
|
|
#ifdef CONFIG_MTD_PHYSMAP_COMPAT
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
if (err == 0)
|
|
|
|
platform_device_register(&physmap_flash);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return err;
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
static void __exit physmap_exit(void)
|
|
|
|
{
|
2008-12-01 17:23:40 -05:00
|
|
|
#ifdef CONFIG_MTD_PHYSMAP_COMPAT
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
platform_device_unregister(&physmap_flash);
|
|
|
|
#endif
|
|
|
|
platform_driver_unregister(&physmap_flash_driver);
|
|
|
|
}
|
2005-04-16 18:20:36 -04:00
|
|
|
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
module_init(physmap_init);
|
|
|
|
module_exit(physmap_exit);
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
|
|
|
|
MODULE_DESCRIPTION("Generic configurable MTD map driver");
|
2008-04-18 16:44:26 -04:00
|
|
|
|
|
|
|
/* legacy platform drivers can't hotplug or coldplg */
|
2008-12-01 17:23:40 -05:00
|
|
|
#ifndef CONFIG_MTD_PHYSMAP_COMPAT
|
2008-04-18 16:44:26 -04:00
|
|
|
/* work with hotplug and coldplug */
|
|
|
|
MODULE_ALIAS("platform:physmap-flash");
|
|
|
|
#endif
|