android_kernel_xiaomi_sm8350/net/sunrpc/xprtrdma/svc_rdma_sendto.c

526 lines
15 KiB
C
Raw Normal View History

/*
* Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the BSD-type
* license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* Neither the name of the Network Appliance, Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Author: Tom Tucker <tom@opengridcomputing.com>
*/
#include <linux/sunrpc/debug.h>
#include <linux/sunrpc/rpc_rdma.h>
#include <linux/spinlock.h>
#include <asm/unaligned.h>
#include <rdma/ib_verbs.h>
#include <rdma/rdma_cm.h>
#include <linux/sunrpc/svc_rdma.h>
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
/* Encode an XDR as an array of IB SGE
*
* Assumptions:
* - head[0] is physically contiguous.
* - tail[0] is physically contiguous.
* - pages[] is not physically or virtually contigous and consists of
* PAGE_SIZE elements.
*
* Output:
* SGE[0] reserved for RCPRDMA header
* SGE[1] data from xdr->head[]
* SGE[2..sge_count-2] data from xdr->pages[]
* SGE[sge_count-1] data from xdr->tail.
*
* The max SGE we need is the length of the XDR / pagesize + one for
* head + one for tail + one for RPCRDMA header. Since RPCSVC_MAXPAGES
* reserves a page for both the request and the reply header, and this
* array is only concerned with the reply we are assured that we have
* on extra page for the RPCRMDA header.
*/
static void xdr_to_sge(struct svcxprt_rdma *xprt,
struct xdr_buf *xdr,
struct svc_rdma_req_map *vec)
{
int sge_max = (xdr->len+PAGE_SIZE-1) / PAGE_SIZE + 3;
int sge_no;
u32 sge_bytes;
u32 page_bytes;
u32 page_off;
int page_no;
BUG_ON(xdr->len !=
(xdr->head[0].iov_len + xdr->page_len + xdr->tail[0].iov_len));
/* Skip the first sge, this is for the RPCRDMA header */
sge_no = 1;
/* Head SGE */
vec->sge[sge_no].iov_base = xdr->head[0].iov_base;
vec->sge[sge_no].iov_len = xdr->head[0].iov_len;
sge_no++;
/* pages SGE */
page_no = 0;
page_bytes = xdr->page_len;
page_off = xdr->page_base;
while (page_bytes) {
vec->sge[sge_no].iov_base =
page_address(xdr->pages[page_no]) + page_off;
sge_bytes = min_t(u32, page_bytes, (PAGE_SIZE - page_off));
page_bytes -= sge_bytes;
vec->sge[sge_no].iov_len = sge_bytes;
sge_no++;
page_no++;
page_off = 0; /* reset for next time through loop */
}
/* Tail SGE */
if (xdr->tail[0].iov_len) {
vec->sge[sge_no].iov_base = xdr->tail[0].iov_base;
vec->sge[sge_no].iov_len = xdr->tail[0].iov_len;
sge_no++;
}
BUG_ON(sge_no > sge_max);
vec->count = sge_no;
}
/* Assumptions:
* - The specified write_len can be represented in sc_max_sge * PAGE_SIZE
*/
static int send_write(struct svcxprt_rdma *xprt, struct svc_rqst *rqstp,
u32 rmr, u64 to,
u32 xdr_off, int write_len,
struct svc_rdma_req_map *vec)
{
struct ib_send_wr write_wr;
struct ib_sge *sge;
int xdr_sge_no;
int sge_no;
int sge_bytes;
int sge_off;
int bc;
struct svc_rdma_op_ctxt *ctxt;
BUG_ON(vec->count > RPCSVC_MAXPAGES);
dprintk("svcrdma: RDMA_WRITE rmr=%x, to=%llx, xdr_off=%d, "
"write_len=%d, vec->sge=%p, vec->count=%lu\n",
rmr, (unsigned long long)to, xdr_off,
write_len, vec->sge, vec->count);
ctxt = svc_rdma_get_context(xprt);
ctxt->direction = DMA_TO_DEVICE;
sge = ctxt->sge;
/* Find the SGE associated with xdr_off */
for (bc = xdr_off, xdr_sge_no = 1; bc && xdr_sge_no < vec->count;
xdr_sge_no++) {
if (vec->sge[xdr_sge_no].iov_len > bc)
break;
bc -= vec->sge[xdr_sge_no].iov_len;
}
sge_off = bc;
bc = write_len;
sge_no = 0;
/* Copy the remaining SGE */
while (bc != 0 && xdr_sge_no < vec->count) {
sge[sge_no].lkey = xprt->sc_phys_mr->lkey;
sge_bytes = min((size_t)bc,
(size_t)(vec->sge[xdr_sge_no].iov_len-sge_off));
sge[sge_no].length = sge_bytes;
atomic_inc(&xprt->sc_dma_used);
sge[sge_no].addr =
ib_dma_map_single(xprt->sc_cm_id->device,
(void *)
vec->sge[xdr_sge_no].iov_base + sge_off,
sge_bytes, DMA_TO_DEVICE);
dma-mapping: add the device argument to dma_mapping_error() Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 22:44:49 -04:00
if (dma_mapping_error(xprt->sc_cm_id->device->dma_device,
sge[sge_no].addr))
goto err;
sge_off = 0;
sge_no++;
ctxt->count++;
xdr_sge_no++;
bc -= sge_bytes;
}
BUG_ON(bc != 0);
BUG_ON(xdr_sge_no > vec->count);
/* Prepare WRITE WR */
memset(&write_wr, 0, sizeof write_wr);
ctxt->wr_op = IB_WR_RDMA_WRITE;
write_wr.wr_id = (unsigned long)ctxt;
write_wr.sg_list = &sge[0];
write_wr.num_sge = sge_no;
write_wr.opcode = IB_WR_RDMA_WRITE;
write_wr.send_flags = IB_SEND_SIGNALED;
write_wr.wr.rdma.rkey = rmr;
write_wr.wr.rdma.remote_addr = to;
/* Post It */
atomic_inc(&rdma_stat_write);
if (svc_rdma_send(xprt, &write_wr))
goto err;
return 0;
err:
svc_rdma_put_context(ctxt, 0);
/* Fatal error, close transport */
return -EIO;
}
static int send_write_chunks(struct svcxprt_rdma *xprt,
struct rpcrdma_msg *rdma_argp,
struct rpcrdma_msg *rdma_resp,
struct svc_rqst *rqstp,
struct svc_rdma_req_map *vec)
{
u32 xfer_len = rqstp->rq_res.page_len + rqstp->rq_res.tail[0].iov_len;
int write_len;
int max_write;
u32 xdr_off;
int chunk_off;
int chunk_no;
struct rpcrdma_write_array *arg_ary;
struct rpcrdma_write_array *res_ary;
int ret;
arg_ary = svc_rdma_get_write_array(rdma_argp);
if (!arg_ary)
return 0;
res_ary = (struct rpcrdma_write_array *)
&rdma_resp->rm_body.rm_chunks[1];
max_write = xprt->sc_max_sge * PAGE_SIZE;
/* Write chunks start at the pagelist */
for (xdr_off = rqstp->rq_res.head[0].iov_len, chunk_no = 0;
xfer_len && chunk_no < arg_ary->wc_nchunks;
chunk_no++) {
struct rpcrdma_segment *arg_ch;
u64 rs_offset;
arg_ch = &arg_ary->wc_array[chunk_no].wc_target;
write_len = min(xfer_len, arg_ch->rs_length);
/* Prepare the response chunk given the length actually
* written */
rs_offset = get_unaligned(&(arg_ch->rs_offset));
svc_rdma_xdr_encode_array_chunk(res_ary, chunk_no,
arg_ch->rs_handle,
rs_offset,
write_len);
chunk_off = 0;
while (write_len) {
int this_write;
this_write = min(write_len, max_write);
ret = send_write(xprt, rqstp,
arg_ch->rs_handle,
rs_offset + chunk_off,
xdr_off,
this_write,
vec);
if (ret) {
dprintk("svcrdma: RDMA_WRITE failed, ret=%d\n",
ret);
return -EIO;
}
chunk_off += this_write;
xdr_off += this_write;
xfer_len -= this_write;
write_len -= this_write;
}
}
/* Update the req with the number of chunks actually used */
svc_rdma_xdr_encode_write_list(rdma_resp, chunk_no);
return rqstp->rq_res.page_len + rqstp->rq_res.tail[0].iov_len;
}
static int send_reply_chunks(struct svcxprt_rdma *xprt,
struct rpcrdma_msg *rdma_argp,
struct rpcrdma_msg *rdma_resp,
struct svc_rqst *rqstp,
struct svc_rdma_req_map *vec)
{
u32 xfer_len = rqstp->rq_res.len;
int write_len;
int max_write;
u32 xdr_off;
int chunk_no;
int chunk_off;
struct rpcrdma_segment *ch;
struct rpcrdma_write_array *arg_ary;
struct rpcrdma_write_array *res_ary;
int ret;
arg_ary = svc_rdma_get_reply_array(rdma_argp);
if (!arg_ary)
return 0;
/* XXX: need to fix when reply lists occur with read-list and or
* write-list */
res_ary = (struct rpcrdma_write_array *)
&rdma_resp->rm_body.rm_chunks[2];
max_write = xprt->sc_max_sge * PAGE_SIZE;
/* xdr offset starts at RPC message */
for (xdr_off = 0, chunk_no = 0;
xfer_len && chunk_no < arg_ary->wc_nchunks;
chunk_no++) {
u64 rs_offset;
ch = &arg_ary->wc_array[chunk_no].wc_target;
write_len = min(xfer_len, ch->rs_length);
/* Prepare the reply chunk given the length actually
* written */
rs_offset = get_unaligned(&(ch->rs_offset));
svc_rdma_xdr_encode_array_chunk(res_ary, chunk_no,
ch->rs_handle, rs_offset,
write_len);
chunk_off = 0;
while (write_len) {
int this_write;
this_write = min(write_len, max_write);
ret = send_write(xprt, rqstp,
ch->rs_handle,
rs_offset + chunk_off,
xdr_off,
this_write,
vec);
if (ret) {
dprintk("svcrdma: RDMA_WRITE failed, ret=%d\n",
ret);
return -EIO;
}
chunk_off += this_write;
xdr_off += this_write;
xfer_len -= this_write;
write_len -= this_write;
}
}
/* Update the req with the number of chunks actually used */
svc_rdma_xdr_encode_reply_array(res_ary, chunk_no);
return rqstp->rq_res.len;
}
/* This function prepares the portion of the RPCRDMA message to be
* sent in the RDMA_SEND. This function is called after data sent via
* RDMA has already been transmitted. There are three cases:
* - The RPCRDMA header, RPC header, and payload are all sent in a
* single RDMA_SEND. This is the "inline" case.
* - The RPCRDMA header and some portion of the RPC header and data
* are sent via this RDMA_SEND and another portion of the data is
* sent via RDMA.
* - The RPCRDMA header [NOMSG] is sent in this RDMA_SEND and the RPC
* header and data are all transmitted via RDMA.
* In all three cases, this function prepares the RPCRDMA header in
* sge[0], the 'type' parameter indicates the type to place in the
* RPCRDMA header, and the 'byte_count' field indicates how much of
* the XDR to include in this RDMA_SEND.
*/
static int send_reply(struct svcxprt_rdma *rdma,
struct svc_rqst *rqstp,
struct page *page,
struct rpcrdma_msg *rdma_resp,
struct svc_rdma_op_ctxt *ctxt,
struct svc_rdma_req_map *vec,
int byte_count)
{
struct ib_send_wr send_wr;
int sge_no;
int sge_bytes;
int page_no;
int ret;
/* Post a recv buffer to handle another request. */
ret = svc_rdma_post_recv(rdma);
if (ret) {
printk(KERN_INFO
"svcrdma: could not post a receive buffer, err=%d."
"Closing transport %p.\n", ret, rdma);
set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
svc_rdma_put_context(ctxt, 0);
return -ENOTCONN;
}
/* Prepare the context */
ctxt->pages[0] = page;
ctxt->count = 1;
/* Prepare the SGE for the RPCRDMA Header */
atomic_inc(&rdma->sc_dma_used);
ctxt->sge[0].addr =
ib_dma_map_page(rdma->sc_cm_id->device,
page, 0, PAGE_SIZE, DMA_TO_DEVICE);
ctxt->direction = DMA_TO_DEVICE;
ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
ctxt->sge[0].lkey = rdma->sc_phys_mr->lkey;
/* Determine how many of our SGE are to be transmitted */
for (sge_no = 1; byte_count && sge_no < vec->count; sge_no++) {
sge_bytes = min_t(size_t, vec->sge[sge_no].iov_len, byte_count);
byte_count -= sge_bytes;
atomic_inc(&rdma->sc_dma_used);
ctxt->sge[sge_no].addr =
ib_dma_map_single(rdma->sc_cm_id->device,
vec->sge[sge_no].iov_base,
sge_bytes, DMA_TO_DEVICE);
ctxt->sge[sge_no].length = sge_bytes;
ctxt->sge[sge_no].lkey = rdma->sc_phys_mr->lkey;
}
BUG_ON(byte_count != 0);
/* Save all respages in the ctxt and remove them from the
* respages array. They are our pages until the I/O
* completes.
*/
for (page_no = 0; page_no < rqstp->rq_resused; page_no++) {
ctxt->pages[page_no+1] = rqstp->rq_respages[page_no];
ctxt->count++;
rqstp->rq_respages[page_no] = NULL;
/* If there are more pages than SGE, terminate SGE list */
if (page_no+1 >= sge_no)
ctxt->sge[page_no+1].length = 0;
}
BUG_ON(sge_no > rdma->sc_max_sge);
memset(&send_wr, 0, sizeof send_wr);
ctxt->wr_op = IB_WR_SEND;
send_wr.wr_id = (unsigned long)ctxt;
send_wr.sg_list = ctxt->sge;
send_wr.num_sge = sge_no;
send_wr.opcode = IB_WR_SEND;
send_wr.send_flags = IB_SEND_SIGNALED;
ret = svc_rdma_send(rdma, &send_wr);
if (ret)
svc_rdma_put_context(ctxt, 1);
return ret;
}
void svc_rdma_prep_reply_hdr(struct svc_rqst *rqstp)
{
}
/*
* Return the start of an xdr buffer.
*/
static void *xdr_start(struct xdr_buf *xdr)
{
return xdr->head[0].iov_base -
(xdr->len -
xdr->page_len -
xdr->tail[0].iov_len -
xdr->head[0].iov_len);
}
int svc_rdma_sendto(struct svc_rqst *rqstp)
{
struct svc_xprt *xprt = rqstp->rq_xprt;
struct svcxprt_rdma *rdma =
container_of(xprt, struct svcxprt_rdma, sc_xprt);
struct rpcrdma_msg *rdma_argp;
struct rpcrdma_msg *rdma_resp;
struct rpcrdma_write_array *reply_ary;
enum rpcrdma_proc reply_type;
int ret;
int inline_bytes;
struct page *res_page;
struct svc_rdma_op_ctxt *ctxt;
struct svc_rdma_req_map *vec;
dprintk("svcrdma: sending response for rqstp=%p\n", rqstp);
/* Get the RDMA request header. */
rdma_argp = xdr_start(&rqstp->rq_arg);
/* Build an req vec for the XDR */
ctxt = svc_rdma_get_context(rdma);
ctxt->direction = DMA_TO_DEVICE;
vec = svc_rdma_get_req_map();
xdr_to_sge(rdma, &rqstp->rq_res, vec);
inline_bytes = rqstp->rq_res.len;
/* Create the RDMA response header */
res_page = svc_rdma_get_page();
rdma_resp = page_address(res_page);
reply_ary = svc_rdma_get_reply_array(rdma_argp);
if (reply_ary)
reply_type = RDMA_NOMSG;
else
reply_type = RDMA_MSG;
svc_rdma_xdr_encode_reply_header(rdma, rdma_argp,
rdma_resp, reply_type);
/* Send any write-chunk data and build resp write-list */
ret = send_write_chunks(rdma, rdma_argp, rdma_resp,
rqstp, vec);
if (ret < 0) {
printk(KERN_ERR "svcrdma: failed to send write chunks, rc=%d\n",
ret);
goto error;
}
inline_bytes -= ret;
/* Send any reply-list data and update resp reply-list */
ret = send_reply_chunks(rdma, rdma_argp, rdma_resp,
rqstp, vec);
if (ret < 0) {
printk(KERN_ERR "svcrdma: failed to send reply chunks, rc=%d\n",
ret);
goto error;
}
inline_bytes -= ret;
ret = send_reply(rdma, rqstp, res_page, rdma_resp, ctxt, vec,
inline_bytes);
svc_rdma_put_req_map(vec);
dprintk("svcrdma: send_reply returns %d\n", ret);
return ret;
error:
svc_rdma_put_req_map(vec);
svc_rdma_put_context(ctxt, 0);
put_page(res_page);
return ret;
}