android_kernel_xiaomi_sm8350/arch/x86_64/kernel/pci-calgary.c

1070 lines
26 KiB
C
Raw Normal View History

/*
* Derived from arch/powerpc/kernel/iommu.c
*
* Copyright (C) IBM Corporation, 2006
*
* Author: Jon Mason <jdmason@us.ibm.com>
* Author: Muli Ben-Yehuda <muli@il.ibm.com>
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <asm/proto.h>
#include <asm/calgary.h>
#include <asm/tce.h>
#include <asm/pci-direct.h>
#include <asm/system.h>
#include <asm/dma.h>
#define PCI_DEVICE_ID_IBM_CALGARY 0x02a1
#define PCI_VENDOR_DEVICE_ID_CALGARY \
(PCI_VENDOR_ID_IBM | PCI_DEVICE_ID_IBM_CALGARY << 16)
/* we need these for register space address calculation */
#define START_ADDRESS 0xfe000000
#define CHASSIS_BASE 0
#define ONE_BASED_CHASSIS_NUM 1
/* register offsets inside the host bridge space */
#define PHB_CSR_OFFSET 0x0110
#define PHB_PLSSR_OFFSET 0x0120
#define PHB_CONFIG_RW_OFFSET 0x0160
#define PHB_IOBASE_BAR_LOW 0x0170
#define PHB_IOBASE_BAR_HIGH 0x0180
#define PHB_MEM_1_LOW 0x0190
#define PHB_MEM_1_HIGH 0x01A0
#define PHB_IO_ADDR_SIZE 0x01B0
#define PHB_MEM_1_SIZE 0x01C0
#define PHB_MEM_ST_OFFSET 0x01D0
#define PHB_AER_OFFSET 0x0200
#define PHB_CONFIG_0_HIGH 0x0220
#define PHB_CONFIG_0_LOW 0x0230
#define PHB_CONFIG_0_END 0x0240
#define PHB_MEM_2_LOW 0x02B0
#define PHB_MEM_2_HIGH 0x02C0
#define PHB_MEM_2_SIZE_HIGH 0x02D0
#define PHB_MEM_2_SIZE_LOW 0x02E0
#define PHB_DOSHOLE_OFFSET 0x08E0
/* PHB_CONFIG_RW */
#define PHB_TCE_ENABLE 0x20000000
#define PHB_SLOT_DISABLE 0x1C000000
#define PHB_DAC_DISABLE 0x01000000
#define PHB_MEM2_ENABLE 0x00400000
#define PHB_MCSR_ENABLE 0x00100000
/* TAR (Table Address Register) */
#define TAR_SW_BITS 0x0000ffffffff800fUL
#define TAR_VALID 0x0000000000000008UL
/* CSR (Channel/DMA Status Register) */
#define CSR_AGENT_MASK 0xffe0ffff
#define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
#define MAX_NUM_CHASSIS 8 /* max number of chassis */
/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */
#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2)
#define PHBS_PER_CALGARY 4
/* register offsets in Calgary's internal register space */
static const unsigned long tar_offsets[] = {
0x0580 /* TAR0 */,
0x0588 /* TAR1 */,
0x0590 /* TAR2 */,
0x0598 /* TAR3 */
};
static const unsigned long split_queue_offsets[] = {
0x4870 /* SPLIT QUEUE 0 */,
0x5870 /* SPLIT QUEUE 1 */,
0x6870 /* SPLIT QUEUE 2 */,
0x7870 /* SPLIT QUEUE 3 */
};
static const unsigned long phb_offsets[] = {
0x8000 /* PHB0 */,
0x9000 /* PHB1 */,
0xA000 /* PHB2 */,
0xB000 /* PHB3 */
};
unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED;
static int translate_empty_slots __read_mostly = 0;
static int calgary_detected __read_mostly = 0;
struct calgary_bus_info {
void *tce_space;
unsigned char translation_disabled;
signed char phbid;
};
static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
static void tce_cache_blast(struct iommu_table *tbl);
/* enable this to stress test the chip's TCE cache */
#ifdef CONFIG_IOMMU_DEBUG
int debugging __read_mostly = 1;
static inline unsigned long verify_bit_range(unsigned long* bitmap,
int expected, unsigned long start, unsigned long end)
{
unsigned long idx = start;
BUG_ON(start >= end);
while (idx < end) {
if (!!test_bit(idx, bitmap) != expected)
return idx;
++idx;
}
/* all bits have the expected value */
return ~0UL;
}
#else /* debugging is disabled */
int debugging __read_mostly = 0;
static inline unsigned long verify_bit_range(unsigned long* bitmap,
int expected, unsigned long start, unsigned long end)
{
return ~0UL;
}
#endif /* CONFIG_IOMMU_DEBUG */
static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen)
{
unsigned int npages;
npages = PAGE_ALIGN(dma + dmalen) - (dma & PAGE_MASK);
npages >>= PAGE_SHIFT;
return npages;
}
static inline int translate_phb(struct pci_dev* dev)
{
int disabled = bus_info[dev->bus->number].translation_disabled;
return !disabled;
}
static void iommu_range_reserve(struct iommu_table *tbl,
unsigned long start_addr, unsigned int npages)
{
unsigned long index;
unsigned long end;
unsigned long badbit;
index = start_addr >> PAGE_SHIFT;
/* bail out if we're asked to reserve a region we don't cover */
if (index >= tbl->it_size)
return;
end = index + npages;
if (end > tbl->it_size) /* don't go off the table */
end = tbl->it_size;
badbit = verify_bit_range(tbl->it_map, 0, index, end);
if (badbit != ~0UL) {
if (printk_ratelimit())
printk(KERN_ERR "Calgary: entry already allocated at "
"0x%lx tbl %p dma 0x%lx npages %u\n",
badbit, tbl, start_addr, npages);
}
set_bit_string(tbl->it_map, index, npages);
}
static unsigned long iommu_range_alloc(struct iommu_table *tbl,
unsigned int npages)
{
unsigned long offset;
BUG_ON(npages == 0);
offset = find_next_zero_string(tbl->it_map, tbl->it_hint,
tbl->it_size, npages);
if (offset == ~0UL) {
tce_cache_blast(tbl);
offset = find_next_zero_string(tbl->it_map, 0,
tbl->it_size, npages);
if (offset == ~0UL) {
printk(KERN_WARNING "Calgary: IOMMU full.\n");
if (panic_on_overflow)
panic("Calgary: fix the allocator.\n");
else
return bad_dma_address;
}
}
set_bit_string(tbl->it_map, offset, npages);
tbl->it_hint = offset + npages;
BUG_ON(tbl->it_hint > tbl->it_size);
return offset;
}
static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *vaddr,
unsigned int npages, int direction)
{
unsigned long entry, flags;
dma_addr_t ret = bad_dma_address;
spin_lock_irqsave(&tbl->it_lock, flags);
entry = iommu_range_alloc(tbl, npages);
if (unlikely(entry == bad_dma_address))
goto error;
/* set the return dma address */
ret = (entry << PAGE_SHIFT) | ((unsigned long)vaddr & ~PAGE_MASK);
/* put the TCEs in the HW table */
tce_build(tbl, entry, npages, (unsigned long)vaddr & PAGE_MASK,
direction);
spin_unlock_irqrestore(&tbl->it_lock, flags);
return ret;
error:
spin_unlock_irqrestore(&tbl->it_lock, flags);
printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
"iommu %p\n", npages, tbl);
return bad_dma_address;
}
static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
unsigned int npages)
{
unsigned long entry;
unsigned long badbit;
entry = dma_addr >> PAGE_SHIFT;
BUG_ON(entry + npages > tbl->it_size);
tce_free(tbl, entry, npages);
badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages);
if (badbit != ~0UL) {
if (printk_ratelimit())
printk(KERN_ERR "Calgary: bit is off at 0x%lx "
"tbl %p dma 0x%Lx entry 0x%lx npages %u\n",
badbit, tbl, dma_addr, entry, npages);
}
__clear_bit_string(tbl->it_map, entry, npages);
}
static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
unsigned int npages)
{
unsigned long flags;
spin_lock_irqsave(&tbl->it_lock, flags);
__iommu_free(tbl, dma_addr, npages);
spin_unlock_irqrestore(&tbl->it_lock, flags);
}
static void __calgary_unmap_sg(struct iommu_table *tbl,
struct scatterlist *sglist, int nelems, int direction)
{
while (nelems--) {
unsigned int npages;
dma_addr_t dma = sglist->dma_address;
unsigned int dmalen = sglist->dma_length;
if (dmalen == 0)
break;
npages = num_dma_pages(dma, dmalen);
__iommu_free(tbl, dma, npages);
sglist++;
}
}
void calgary_unmap_sg(struct device *dev, struct scatterlist *sglist,
int nelems, int direction)
{
unsigned long flags;
struct iommu_table *tbl = to_pci_dev(dev)->bus->self->sysdata;
if (!translate_phb(to_pci_dev(dev)))
return;
spin_lock_irqsave(&tbl->it_lock, flags);
__calgary_unmap_sg(tbl, sglist, nelems, direction);
spin_unlock_irqrestore(&tbl->it_lock, flags);
}
static int calgary_nontranslate_map_sg(struct device* dev,
struct scatterlist *sg, int nelems, int direction)
{
int i;
for (i = 0; i < nelems; i++ ) {
struct scatterlist *s = &sg[i];
BUG_ON(!s->page);
s->dma_address = virt_to_bus(page_address(s->page) +s->offset);
s->dma_length = s->length;
}
return nelems;
}
int calgary_map_sg(struct device *dev, struct scatterlist *sg,
int nelems, int direction)
{
struct iommu_table *tbl = to_pci_dev(dev)->bus->self->sysdata;
unsigned long flags;
unsigned long vaddr;
unsigned int npages;
unsigned long entry;
int i;
if (!translate_phb(to_pci_dev(dev)))
return calgary_nontranslate_map_sg(dev, sg, nelems, direction);
spin_lock_irqsave(&tbl->it_lock, flags);
for (i = 0; i < nelems; i++ ) {
struct scatterlist *s = &sg[i];
BUG_ON(!s->page);
vaddr = (unsigned long)page_address(s->page) + s->offset;
npages = num_dma_pages(vaddr, s->length);
entry = iommu_range_alloc(tbl, npages);
if (entry == bad_dma_address) {
/* makes sure unmap knows to stop */
s->dma_length = 0;
goto error;
}
s->dma_address = (entry << PAGE_SHIFT) | s->offset;
/* insert into HW table */
tce_build(tbl, entry, npages, vaddr & PAGE_MASK,
direction);
s->dma_length = s->length;
}
spin_unlock_irqrestore(&tbl->it_lock, flags);
return nelems;
error:
__calgary_unmap_sg(tbl, sg, nelems, direction);
for (i = 0; i < nelems; i++) {
sg[i].dma_address = bad_dma_address;
sg[i].dma_length = 0;
}
spin_unlock_irqrestore(&tbl->it_lock, flags);
return 0;
}
dma_addr_t calgary_map_single(struct device *dev, void *vaddr,
size_t size, int direction)
{
dma_addr_t dma_handle = bad_dma_address;
unsigned long uaddr;
unsigned int npages;
struct iommu_table *tbl = to_pci_dev(dev)->bus->self->sysdata;
uaddr = (unsigned long)vaddr;
npages = num_dma_pages(uaddr, size);
if (translate_phb(to_pci_dev(dev)))
dma_handle = iommu_alloc(tbl, vaddr, npages, direction);
else
dma_handle = virt_to_bus(vaddr);
return dma_handle;
}
void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
size_t size, int direction)
{
struct iommu_table *tbl = to_pci_dev(dev)->bus->self->sysdata;
unsigned int npages;
if (!translate_phb(to_pci_dev(dev)))
return;
npages = num_dma_pages(dma_handle, size);
iommu_free(tbl, dma_handle, npages);
}
void* calgary_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
void *ret = NULL;
dma_addr_t mapping;
unsigned int npages, order;
struct iommu_table *tbl;
tbl = to_pci_dev(dev)->bus->self->sysdata;
size = PAGE_ALIGN(size); /* size rounded up to full pages */
npages = size >> PAGE_SHIFT;
order = get_order(size);
/* alloc enough pages (and possibly more) */
ret = (void *)__get_free_pages(flag, order);
if (!ret)
goto error;
memset(ret, 0, size);
if (translate_phb(to_pci_dev(dev))) {
/* set up tces to cover the allocated range */
mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL);
if (mapping == bad_dma_address)
goto free;
*dma_handle = mapping;
} else /* non translated slot */
*dma_handle = virt_to_bus(ret);
return ret;
free:
free_pages((unsigned long)ret, get_order(size));
ret = NULL;
error:
return ret;
}
static struct dma_mapping_ops calgary_dma_ops = {
.alloc_coherent = calgary_alloc_coherent,
.map_single = calgary_map_single,
.unmap_single = calgary_unmap_single,
.map_sg = calgary_map_sg,
.unmap_sg = calgary_unmap_sg,
};
static inline int busno_to_phbid(unsigned char num)
{
return bus_info[num].phbid;
}
static inline unsigned long split_queue_offset(unsigned char num)
{
size_t idx = busno_to_phbid(num);
return split_queue_offsets[idx];
}
static inline unsigned long tar_offset(unsigned char num)
{
size_t idx = busno_to_phbid(num);
return tar_offsets[idx];
}
static inline unsigned long phb_offset(unsigned char num)
{
size_t idx = busno_to_phbid(num);
return phb_offsets[idx];
}
static inline void __iomem* calgary_reg(void __iomem *bar, unsigned long offset)
{
unsigned long target = ((unsigned long)bar) | offset;
return (void __iomem*)target;
}
static void tce_cache_blast(struct iommu_table *tbl)
{
u64 val;
u32 aer;
int i = 0;
void __iomem *bbar = tbl->bbar;
void __iomem *target;
/* disable arbitration on the bus */
target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_AER_OFFSET);
aer = readl(target);
writel(0, target);
/* read plssr to ensure it got there */
target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_PLSSR_OFFSET);
val = readl(target);
/* poll split queues until all DMA activity is done */
target = calgary_reg(bbar, split_queue_offset(tbl->it_busno));
do {
val = readq(target);
i++;
} while ((val & 0xff) != 0xff && i < 100);
if (i == 100)
printk(KERN_WARNING "Calgary: PCI bus not quiesced, "
"continuing anyway\n");
/* invalidate TCE cache */
target = calgary_reg(bbar, tar_offset(tbl->it_busno));
writeq(tbl->tar_val, target);
/* enable arbitration */
target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_AER_OFFSET);
writel(aer, target);
(void)readl(target); /* flush */
}
static void __init calgary_reserve_mem_region(struct pci_dev *dev, u64 start,
u64 limit)
{
unsigned int numpages;
limit = limit | 0xfffff;
limit++;
numpages = ((limit - start) >> PAGE_SHIFT);
iommu_range_reserve(dev->sysdata, start, numpages);
}
static void __init calgary_reserve_peripheral_mem_1(struct pci_dev *dev)
{
void __iomem *target;
u64 low, high, sizelow;
u64 start, limit;
struct iommu_table *tbl = dev->sysdata;
unsigned char busnum = dev->bus->number;
void __iomem *bbar = tbl->bbar;
/* peripheral MEM_1 region */
target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_LOW);
low = be32_to_cpu(readl(target));
target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_HIGH);
high = be32_to_cpu(readl(target));
target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_SIZE);
sizelow = be32_to_cpu(readl(target));
start = (high << 32) | low;
limit = sizelow;
calgary_reserve_mem_region(dev, start, limit);
}
static void __init calgary_reserve_peripheral_mem_2(struct pci_dev *dev)
{
void __iomem *target;
u32 val32;
u64 low, high, sizelow, sizehigh;
u64 start, limit;
struct iommu_table *tbl = dev->sysdata;
unsigned char busnum = dev->bus->number;
void __iomem *bbar = tbl->bbar;
/* is it enabled? */
target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET);
val32 = be32_to_cpu(readl(target));
if (!(val32 & PHB_MEM2_ENABLE))
return;
target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_LOW);
low = be32_to_cpu(readl(target));
target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_HIGH);
high = be32_to_cpu(readl(target));
target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_SIZE_LOW);
sizelow = be32_to_cpu(readl(target));
target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_SIZE_HIGH);
sizehigh = be32_to_cpu(readl(target));
start = (high << 32) | low;
limit = (sizehigh << 32) | sizelow;
calgary_reserve_mem_region(dev, start, limit);
}
/*
* some regions of the IO address space do not get translated, so we
* must not give devices IO addresses in those regions. The regions
* are the 640KB-1MB region and the two PCI peripheral memory holes.
* Reserve all of them in the IOMMU bitmap to avoid giving them out
* later.
*/
static void __init calgary_reserve_regions(struct pci_dev *dev)
{
unsigned int npages;
void __iomem *bbar;
unsigned char busnum;
u64 start;
struct iommu_table *tbl = dev->sysdata;
bbar = tbl->bbar;
busnum = dev->bus->number;
/* reserve bad_dma_address in case it's a legal address */
iommu_range_reserve(tbl, bad_dma_address, 1);
/* avoid the BIOS/VGA first 640KB-1MB region */
start = (640 * 1024);
npages = ((1024 - 640) * 1024) >> PAGE_SHIFT;
iommu_range_reserve(tbl, start, npages);
/* reserve the two PCI peripheral memory regions in IO space */
calgary_reserve_peripheral_mem_1(dev);
calgary_reserve_peripheral_mem_2(dev);
}
static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)
{
u64 val64;
u64 table_phys;
void __iomem *target;
int ret;
struct iommu_table *tbl;
/* build TCE tables for each PHB */
ret = build_tce_table(dev, bbar);
if (ret)
return ret;
tbl = dev->sysdata;
tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
tce_free(tbl, 0, tbl->it_size);
calgary_reserve_regions(dev);
/* set TARs for each PHB */
target = calgary_reg(bbar, tar_offset(dev->bus->number));
val64 = be64_to_cpu(readq(target));
/* zero out all TAR bits under sw control */
val64 &= ~TAR_SW_BITS;
tbl = dev->sysdata;
table_phys = (u64)__pa(tbl->it_base);
val64 |= table_phys;
BUG_ON(specified_table_size > TCE_TABLE_SIZE_8M);
val64 |= (u64) specified_table_size;
tbl->tar_val = cpu_to_be64(val64);
writeq(tbl->tar_val, target);
readq(target); /* flush */
return 0;
}
static void __init calgary_free_bus(struct pci_dev *dev)
{
u64 val64;
struct iommu_table *tbl = dev->sysdata;
void __iomem *target;
unsigned int bitmapsz;
target = calgary_reg(tbl->bbar, tar_offset(dev->bus->number));
val64 = be64_to_cpu(readq(target));
val64 &= ~TAR_SW_BITS;
writeq(cpu_to_be64(val64), target);
readq(target); /* flush */
bitmapsz = tbl->it_size / BITS_PER_BYTE;
free_pages((unsigned long)tbl->it_map, get_order(bitmapsz));
tbl->it_map = NULL;
kfree(tbl);
dev->sysdata = NULL;
/* Can't free bootmem allocated memory after system is up :-( */
bus_info[dev->bus->number].tce_space = NULL;
}
static void calgary_watchdog(unsigned long data)
{
struct pci_dev *dev = (struct pci_dev *)data;
struct iommu_table *tbl = dev->sysdata;
void __iomem *bbar = tbl->bbar;
u32 val32;
void __iomem *target;
target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_CSR_OFFSET);
val32 = be32_to_cpu(readl(target));
/* If no error, the agent ID in the CSR is not valid */
if (val32 & CSR_AGENT_MASK) {
printk(KERN_EMERG "calgary_watchdog: DMA error on bus %d, "
"CSR = %#x\n", dev->bus->number, val32);
writel(0, target);
/* Disable bus that caused the error */
target = calgary_reg(bbar, phb_offset(tbl->it_busno) |
PHB_CONFIG_RW_OFFSET);
val32 = be32_to_cpu(readl(target));
val32 |= PHB_SLOT_DISABLE;
writel(cpu_to_be32(val32), target);
readl(target); /* flush */
} else {
/* Reset the timer */
mod_timer(&tbl->watchdog_timer, jiffies + 2 * HZ);
}
}
static void __init calgary_enable_translation(struct pci_dev *dev)
{
u32 val32;
unsigned char busnum;
void __iomem *target;
void __iomem *bbar;
struct iommu_table *tbl;
busnum = dev->bus->number;
tbl = dev->sysdata;
bbar = tbl->bbar;
/* enable TCE in PHB Config Register */
target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET);
val32 = be32_to_cpu(readl(target));
val32 |= PHB_TCE_ENABLE | PHB_DAC_DISABLE | PHB_MCSR_ENABLE;
printk(KERN_INFO "Calgary: enabling translation on PHB %d\n", busnum);
printk(KERN_INFO "Calgary: errant DMAs will now be prevented on this "
"bus.\n");
writel(cpu_to_be32(val32), target);
readl(target); /* flush */
init_timer(&tbl->watchdog_timer);
tbl->watchdog_timer.function = &calgary_watchdog;
tbl->watchdog_timer.data = (unsigned long)dev;
mod_timer(&tbl->watchdog_timer, jiffies);
}
static void __init calgary_disable_translation(struct pci_dev *dev)
{
u32 val32;
unsigned char busnum;
void __iomem *target;
void __iomem *bbar;
struct iommu_table *tbl;
busnum = dev->bus->number;
tbl = dev->sysdata;
bbar = tbl->bbar;
/* disable TCE in PHB Config Register */
target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET);
val32 = be32_to_cpu(readl(target));
val32 &= ~(PHB_TCE_ENABLE | PHB_DAC_DISABLE | PHB_MCSR_ENABLE);
printk(KERN_INFO "Calgary: disabling translation on PHB %d!\n", busnum);
writel(cpu_to_be32(val32), target);
readl(target); /* flush */
del_timer_sync(&tbl->watchdog_timer);
}
static inline unsigned int __init locate_register_space(struct pci_dev *dev)
{
int rionodeid;
u32 address;
rionodeid = (dev->bus->number % 15 > 4) ? 3 : 2;
/*
* register space address calculation as follows:
* FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase)
* ChassisBase is always zero for x366/x260/x460
* RioNodeId is 2 for first Calgary, 3 for second Calgary
*/
address = START_ADDRESS -
(0x800000 * (ONE_BASED_CHASSIS_NUM + dev->bus->number / 15)) +
(0x100000) * (rionodeid - CHASSIS_BASE);
return address;
}
static void __init calgary_init_one_nontraslated(struct pci_dev *dev)
{
pci_dev_get(dev);
dev->sysdata = NULL;
dev->bus->self = dev;
}
static int __init calgary_init_one(struct pci_dev *dev)
{
u32 address;
void __iomem *bbar;
int ret;
address = locate_register_space(dev);
/* map entire 1MB of Calgary config space */
bbar = ioremap_nocache(address, 1024 * 1024);
if (!bbar) {
ret = -ENODATA;
goto done;
}
ret = calgary_setup_tar(dev, bbar);
if (ret)
goto iounmap;
pci_dev_get(dev);
dev->bus->self = dev;
calgary_enable_translation(dev);
return 0;
iounmap:
iounmap(bbar);
done:
return ret;
}
static int __init calgary_init(void)
{
int i, ret = -ENODEV;
struct pci_dev *dev = NULL;
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
for (i = 0; i < MAX_PHB_BUS_NUM; i++) {
dev = pci_get_device(PCI_VENDOR_ID_IBM,
PCI_DEVICE_ID_IBM_CALGARY,
dev);
if (!dev)
break;
if (!translate_phb(dev)) {
calgary_init_one_nontraslated(dev);
continue;
}
if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots)
continue;
ret = calgary_init_one(dev);
if (ret)
goto error;
}
return ret;
error:
for (i--; i >= 0; i--) {
dev = pci_find_device_reverse(PCI_VENDOR_ID_IBM,
PCI_DEVICE_ID_IBM_CALGARY,
dev);
if (!dev)
break;
if (!translate_phb(dev)) {
pci_dev_put(dev);
continue;
}
if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots)
continue;
calgary_disable_translation(dev);
calgary_free_bus(dev);
pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
}
return ret;
}
static inline int __init determine_tce_table_size(u64 ram)
{
int ret;
if (specified_table_size != TCE_TABLE_SIZE_UNSPECIFIED)
return specified_table_size;
/*
* Table sizes are from 0 to 7 (TCE_TABLE_SIZE_64K to
* TCE_TABLE_SIZE_8M). Table size 0 has 8K entries and each
* larger table size has twice as many entries, so shift the
* max ram address by 13 to divide by 8K and then look at the
* order of the result to choose between 0-7.
*/
ret = get_order(ram >> 13);
if (ret > TCE_TABLE_SIZE_8M)
ret = TCE_TABLE_SIZE_8M;
return ret;
}
void __init detect_calgary(void)
{
u32 val;
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
int bus;
void *tbl;
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
int calgary_found = 0;
int phb = -1;
/*
* if the user specified iommu=off or iommu=soft or we found
* another HW IOMMU already, bail out.
*/
if (swiotlb || no_iommu || iommu_detected)
return;
if (!early_pci_allowed())
return;
specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
int dev;
struct calgary_bus_info *info = &bus_info[bus];
info->phbid = -1;
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
if (read_pci_config(bus, 0, 0, 0) != PCI_VENDOR_DEVICE_ID_CALGARY)
continue;
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
/*
* There are 4 PHBs per Calgary chip. Set phb to which phb (0-3)
* it is connected to releative to the clagary chip.
*/
phb = (phb + 1) % PHBS_PER_CALGARY;
if (info->translation_disabled)
continue;
/*
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
* Scan the slots of the PCI bus to see if there is a device present.
* The parent bus will be the zero-ith device, so start at 1.
*/
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
for (dev = 1; dev < 8; dev++) {
val = read_pci_config(bus, dev, 0, 0);
if (val != 0xffffffff || translate_empty_slots) {
tbl = alloc_tce_table();
if (!tbl)
goto cleanup;
info->tce_space = tbl;
info->phbid = phb;
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
calgary_found = 1;
break;
}
}
}
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
if (calgary_found) {
iommu_detected = 1;
calgary_detected = 1;
printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n");
printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
"CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
debugging ? "enabled" : "disabled");
}
return;
cleanup:
for (--bus; bus >= 0; --bus) {
struct calgary_bus_info *info = &bus_info[bus];
if (info->tce_space)
free_tce_table(info->tce_space);
}
}
int __init calgary_iommu_init(void)
{
int ret;
if (no_iommu || swiotlb)
return -ENODEV;
if (!calgary_detected)
return -ENODEV;
/* ok, we're trying to use Calgary - let's roll */
printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n");
ret = calgary_init();
if (ret) {
printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
"falling back to no_iommu\n", ret);
if (end_pfn > MAX_DMA32_PFN)
printk(KERN_ERR "WARNING more than 4GB of memory, "
"32bit PCI may malfunction.\n");
return ret;
}
force_iommu = 1;
dma_ops = &calgary_dma_ops;
return 0;
}
static int __init calgary_parse_options(char *p)
{
unsigned int bridge;
size_t len;
char* endp;
while (*p) {
if (!strncmp(p, "64k", 3))
specified_table_size = TCE_TABLE_SIZE_64K;
else if (!strncmp(p, "128k", 4))
specified_table_size = TCE_TABLE_SIZE_128K;
else if (!strncmp(p, "256k", 4))
specified_table_size = TCE_TABLE_SIZE_256K;
else if (!strncmp(p, "512k", 4))
specified_table_size = TCE_TABLE_SIZE_512K;
else if (!strncmp(p, "1M", 2))
specified_table_size = TCE_TABLE_SIZE_1M;
else if (!strncmp(p, "2M", 2))
specified_table_size = TCE_TABLE_SIZE_2M;
else if (!strncmp(p, "4M", 2))
specified_table_size = TCE_TABLE_SIZE_4M;
else if (!strncmp(p, "8M", 2))
specified_table_size = TCE_TABLE_SIZE_8M;
len = strlen("translate_empty_slots");
if (!strncmp(p, "translate_empty_slots", len))
translate_empty_slots = 1;
len = strlen("disable");
if (!strncmp(p, "disable", len)) {
p += len;
if (*p == '=')
++p;
if (*p == '\0')
break;
bridge = simple_strtol(p, &endp, 0);
if (p == endp)
break;
[PATCH] x86_64: Calgary IOMMU - Multi-Node NULL pointer dereference fix Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-29 15:42:43 -04:00
if (bridge < MAX_PHB_BUS_NUM) {
printk(KERN_INFO "Calgary: disabling "
"translation for PHB 0x%x\n", bridge);
bus_info[bridge].translation_disabled = 1;
}
}
p = strpbrk(p, ",");
if (!p)
break;
p++; /* skip ',' */
}
return 1;
}
__setup("calgary=", calgary_parse_options);