android_kernel_xiaomi_sm8350/arch/arm/plat-mxc/Makefile

#
# Makefile for the linux kernel.
#

# Common support
obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o

# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
obj-$(CONFIG_MXC_TZIC) += tzic.o

obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM)  += pwm.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
[ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2007-07-09 17:06:53 -04:00			`#`
			`# Makefile for the linux kernel.`
			`#`

			`# Common support`
mxc: add arch_reset() function This patch adds arch_reset() function for all mxc platforms. It also removes (unsused) arch/arm/mach-mx2/system.c file. This patch has been tested on i.MX1/27/31/35 Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> 2009-03-02 18:49:23 -05:00			`obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o`
i.MX2 family: Add GPIO multiplexing support This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> 2008-07-05 04:02:55 -04:00
mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family Freescale i.MX51 processor uses a new interrupt controller. Add driver for TrustZone Interrupt Controller Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> 2009-12-03 15:36:41 -05:00			`# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)`
			`obj-$(CONFIG_MXC_TZIC) += tzic.o`

arm/imx/iomux-v1: rename source file and reorganize Kconfig stuff Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> 2010-02-15 03:42:59 -05:00			`obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o`
			`obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o`
			`obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o`
MXC: Add iomux support for MX35 SoCs This iomux is called iomux-v3 in the tree because it is the third known incarnation of MXC iomuxers. It is not only found on the MX35 but also on the MX51 and probably others. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> 2009-04-01 05:11:48 -04:00			`obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o`
[ARM] MXC: add pwm driver for i.MX SoCs This driver has been tested on MX27/MX31. It should work on MX1/MX1 aswell, but the actual setting of the PWM is missing so far. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> 2009-01-16 09:17:16 -05:00			`obj-$(CONFIG_MXC_PWM) += pwm.o`
USB: Add EHCI support for MX27 and MX31 based boards The Freescale MX27 and MX31 SoCs have a EHCI controller onboard. The controller is capable of USB on the go. This patch adds a driver to support all three of them. Users have to pass details about serial interface configuration in the platform data. The USB OTG core used here is the ARC core, so the driver should be renamed and probably be merged with ehci-fsl.c eventually. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 2009-10-27 20:14:59 -04:00			`obj-$(CONFIG_USB_EHCI_MXC) += ehci.o`
MXC: Add support for ULPI Viewports The ARC USB OTG Core has support for accessing ULPI tranceivers through so called ULPI viewports. Export a set of function for use with the USB OTG framework. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-usb@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> 2009-11-05 03:44:09 -05:00			`obj-$(CONFIG_MXC_ULPI) += ulpi.o`
MXC: Add a digital audio multiplexer driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> 2009-10-29 12:12:39 -04:00			`obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o`
			`obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o`