lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a0e90ad8ce
android_kernel_xiaomi_sm8350/arch/riscv/configs/defconfig

106 lines
2.1 KiB
Plaintext
Raw Normal View History

RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS This patch enables NO_HZ_IDLE (idle dynamic ticks) and HIGH_RES_TIMERS (hrtimers) in RV32 and RV64 defconfigs. Both of the above options are enabled by default for architectures such as x86, ARM, and ARM64. The idle dynamic ticks helps use save power by stopping timer ticks when the system is idle whereas hrtimers is a much improved timer subsystem compared to the old "timer wheel" based system. This patch is tested on SiFive Unleashed board and QEMU Virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-05-15 02:30:39 -04:00
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_CGROUP_BPF=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
RISC-V: refresh defconfig This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 01:10:32 -04:00
CONFIG_CHECKPOINT_RESTORE=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_BPF_SYSCALL=y
riscv: defconfig: enable SOC_SIFIVE Enable SOC_SIFIVE so the default upstream config is bootable on the SiFive Unleashed Board. And have basic support for future boards based on the same SoC. Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-27 19:27:57 -04:00
CONFIG_SOC_SIFIVE=y
RISC-V: refresh defconfig This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 01:10:32 -04:00
CONFIG_SMP=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NETLINK_DIAG=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-04 12:16:16 -04:00
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX} eb01d42a7778 ("PCI: consolidate PCI config entry in drivers/pci") reorganized the PCI-related Kconfig entries and resulted in a diff in our defconfig. This simply removes the diff. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23 15:59:17 -05:00
CONFIG_PCI=y
RISC-V: defconfig: Enable Generic PCIE by default Enable generic PCIe by default in the RISC-V defconfig, this allows us to use QEMU's PCIe support out of the box. CONFIG_RAS=y is automatically selected by generic PCIe, so it has been dropped from the defconfig. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> [Palmer: Split out PCIE_XILINX and CRYPTO_DEV_VIRTIO] Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-11 19:41:26 -05:00
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_HOST_GENERIC=y
RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX} eb01d42a7778 ("PCI: consolidate PCI config entry in drivers/pci") reorganized the PCI-related Kconfig entries and resulted in a diff in our defconfig. This simply removes the diff. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23 15:59:17 -05:00
CONFIG_PCIE_XILINX=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_DEVTMPFS=y
riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" Align the RV64 defconfig to the output of "make savedefconfig" to avoid unnecessary deltas for future defconfig patches. This patch should have no runtime functional impact. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25 18:05:59 -04:00
CONFIG_DEVTMPFS_MOUNT=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-04 12:16:16 -04:00
CONFIG_SCSI_VIRTIO=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_VIRTIO_NET=y
CONFIG_MACB=y
CONFIG_E1000E=y
CONFIG_R8169=y
CONFIG_MICROSEMI_PHY=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
RISC-V: defconfig: Enable RISC-V SBI earlycon support This patch enables RISC-V SBI earlycon support in default defconfig so that we can use "earlycon=sbi" in kernel parameters for early debug prints. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-04 08:55:06 -05:00
CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig The SBI exists on all RISC-V systems, so there's no reason not to compile this driver in. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-03-08 16:57:58 -05:00
CONFIG_HVC_RISCV_SBI=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-04 12:16:16 -04:00
CONFIG_VIRTIO_CONSOLE=y
riscv: defconfig: Update the defconfig Update the defconfig: - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable VirtIORNG when running on QEMU Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-13 19:32:30 -04:00
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" Align the RV64 defconfig to the output of "make savedefconfig" to avoid unnecessary deltas for future defconfig patches. This patch should have no runtime functional impact. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25 18:05:59 -04:00
CONFIG_SPI=y
CONFIG_SPI_SIFIVE=y
riscv: defconfig: enable gpio support for HiFive Unleashed [ Upstream commit 0983834a83931606a647c275e5d4165ce4e7b49f ] Ethernet phy VSC8541-01 on HiFive Unleashed has its reset line connected to a gpio, so enable GPIO driver's required to reset the phy. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10 10:22:12 -05:00
CONFIG_GPIOLIB=y
CONFIG_GPIO_SIFIVE=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_DRM=y
CONFIG_DRM_RADEON=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-04 12:16:16 -04:00
CONFIG_DRM_VIRTIO_GPU=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=y
riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" Align the RV64 defconfig to the output of "make savedefconfig" to avoid unnecessary deltas for future defconfig patches. This patch should have no runtime functional impact. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25 18:05:59 -04:00
CONFIG_MMC=y
CONFIG_MMC_SPI=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-04 12:16:16 -04:00
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_VIRTIO_MMIO=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-04 12:16:16 -04:00
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_VIRTIO=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_NFS_FS=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_ROOT_NFS=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-04 12:16:16 -04:00
CONFIG_9P_FS=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-04 17:37:02 -05:00
CONFIG_CRYPTO_USER_API_HASH=y
RISC-V: defconfig: Add CRYPTO_DEV_VIRTIO=y This allows acceleration of cryptography inside QEMU. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23 17:09:01 -05:00
CONFIG_CRYPTO_DEV_VIRTIO=y
RISC-V: defconfig: Enable printk timestamps The printk timestamps are very useful information to visually see where kernel is spending time during boot. It also helps us see the timing of hotplug events at runtime. This patch enables printk timestamps in RISC-V defconfig so that we have it enabled by default (similar to other architectures such as x86_64, arm64, etc). Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 01:10:33 -04:00
CONFIG_PRINTK_TIME=y
RISC-V: refresh defconfig This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 01:10:32 -04:00
# CONFIG_RCU_TRACE is not set
Reference in New Issue Copy Permalink