android_kernel_xiaomi_sm8350/drivers/sh/Makefile

#
# Makefile for the SuperH specific drivers.
#
obj-y	:= intc/

obj-$(CONFIG_HAVE_CLK)		+= clk/
obj-$(CONFIG_MAPLE)		+= maple/
obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
obj-$(CONFIG_GENERIC_GPIO)	+= pfc.o

#
# For the moment we only use this framework for ARM-based SH/R-Mobile
# platforms and generic SH. SH-based SH-Mobile platforms are still using
# an older framework that is pending up-porting, at which point this
# special casing can go away.
#
obj-$(CONFIG_SUPERH)$(CONFIG_ARCH_SHMOBILE)	+= pm_runtime.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 18:20:36 -04:00			`#`
			`# Makefile for the SuperH specific drivers.`
			`#`
sh: clkfwk: Shuffle around to match the intc split up. This shuffles the clock framework code around to a drivers/sh/clk subdir, to follow the intc split up. This will make it easier to subsequently break things out as well as plug in different helpers for non-CPG users. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2010-10-18 08:32:58 -04:00			`obj-y := intc/`
ARM: mach-shmobile: Use shared clock framework Teach SH-Mobile ARM how to make use of the shared SH clock framework. This commit is one atomic switch that dumps the local hackery and instead links in the shared clock framework code in drivers/sh. A few local functions are kept in clock.c. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2010-05-12 10:21:24 -04:00
sh: clkfwk: Shuffle around to match the intc split up. This shuffles the clock framework code around to a drivers/sh/clk subdir, to follow the intc split up. This will make it easier to subsequently break things out as well as plug in different helpers for non-CPG users. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2010-10-18 08:32:58 -04:00			`obj-$(CONFIG_HAVE_CLK) += clk/`
sh: Add maple bus support for the SEGA Dreamcast. The Maple bus is SEGA's proprietary serial bus for peripherals (keyboard, mouse, controller etc). The bus is capable of some (limited) hotplugging and operates at up to 2 M/bits. Drivers of one sort or another existed/exist for 2.4 and a rudimentary port, which didn't support the 2.6 device driver model was also in existence. This driver - for the bus logic itself and for the keyboard (other drivers will follow) are based on the code and concepts of those old drivers but have lots of completely rewritten parts. I have the maple bus code as a built in now as that seems the sane and rational way to handle something like that - you either want the bus or you don't. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2007-09-21 02:55:55 -04:00			`obj-$(CONFIG_MAPLE) += maple/`
sh: clkfwk: Shuffle around to match the intc split up. This shuffles the clock framework code around to a drivers/sh/clk subdir, to follow the intc split up. This will make it easier to subsequently break things out as well as plug in different helpers for non-CPG users. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2010-10-18 08:32:58 -04:00			`obj-$(CONFIG_SUPERHYWAY) += superhyway/`
sh: Break out SuperH PFC code This file breaks out the SuperH PFC code from arch/sh/kernel/gpio.c + arch/sh/include/asm/gpio.h to drivers/sh/pfc.c + include/linux/sh_pfc.h. Similar to the INTC stuff. The non-SuperH specific file location makes it possible to share the code between multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2009-11-27 02:38:01 -05:00			`obj-$(CONFIG_GENERIC_GPIO) += pfc.o`
drivers: sh: Generalize runtime PM platform stub. The runtime PM platform support stub in use by ARM-based SH/R-Mobile platforms contains nothing that's specifically ARM-related and instead of wholly generic to anything using the clock framework. The recent runtime PM changes interact rather badly with the lazy disabling of clocks late in the boot process through the clock framework, leading to situations where the runtime suspend/resume paths are entered without a clock being actively driven due to having been lazily gated off. In order to correct this we can trivially tie in the aforementioned stub as a general fallback for all SH platforms that don't presently have their own runtime PM implementations (the corner case being SH-based SH-Mobile platforms, which have their own stub through the hwblk API -- which in turn has bitrotted and will be subsequently adapted to use the same stub as everyone else), regardless of whether the platforms choose to define power domains of their own or not. This fixes up regressions for clock framework users who also build in runtime PM support without any specific power domains of their own, which was previously causing the serial console to be lost when warring with lazy clock disabling. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2011-11-11 01:41:50 -05:00
			`#`
			`# For the moment we only use this framework for ARM-based SH/R-Mobile`
			`# platforms and generic SH. SH-based SH-Mobile platforms are still using`
			`# an older framework that is pending up-porting, at which point this`
			`# special casing can go away.`
			`#`
			`obj-$(CONFIG_SUPERH)$(CONFIG_ARCH_SHMOBILE) += pm_runtime.o`