android_kernel_xiaomi_sm8350/mm/memory_hotplug.c

859 lines
20 KiB
C
Raw Normal View History

/*
* linux/mm/memory_hotplug.c
*
* Copyright (C)
*/
#include <linux/stddef.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/interrupt.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
#include <linux/compiler.h>
#include <linux/module.h>
#include <linux/pagevec.h>
#include <linux/writeback.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/cpu.h>
#include <linux/memory.h>
#include <linux/memory_hotplug.h>
#include <linux/highmem.h>
#include <linux/vmalloc.h>
#include <linux/ioport.h>
[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_map Change the list of memory nodes allowed to tasks in the top (root) nodeset to dynamically track what cpus are online, using a call to a cpuset hook from the memory hotplug code. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support memory hotplug, then these tasks cannot make use of memory nodes that are added after system boot, because the memory nodes are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. One key motivation for this change is to remain consistent with the behaviour for the top_cpuset's 'cpus', which is also read-only, and which automatically tracks the cpu_online_map. This change also has the minor benefit that it fixes a long standing, little noticed, minor bug in cpusets. The cpuset performance tweak to short circuit the cpuset_zone_allowed() check on systems with just a single cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply changing the 'mems' of the top_cpuset had no affect, even though the change (the write system call) appeared to succeed. With the following change, that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly refuses to be changed via user space writes. Thus no one should be mislead into thinking they've changed the top_cpusets's 'mems' when in affect they haven't. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'mems' file in the top (root) cpuset, making it read only, and making it automatically track the value of node_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged memory nodes allowed by their cpuset. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 05:01:16 -04:00
#include <linux/cpuset.h>
#include <linux/delay.h>
#include <linux/migrate.h>
#include <linux/page-isolation.h>
#include <asm/tlbflush.h>
#include "internal.h"
/* add this memory to iomem resource */
static struct resource *register_memory_resource(u64 start, u64 size)
{
struct resource *res;
res = kzalloc(sizeof(struct resource), GFP_KERNEL);
BUG_ON(!res);
res->name = "System RAM";
res->start = start;
res->end = start + size - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&iomem_resource, res) < 0) {
printk("System RAM resource %llx - %llx cannot be added\n",
(unsigned long long)res->start, (unsigned long long)res->end);
kfree(res);
res = NULL;
}
return res;
}
static void release_memory_resource(struct resource *res)
{
if (!res)
return;
release_resource(res);
kfree(res);
return;
}
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
memory hotplug: register section/node id to free This patch set is to free pages which is allocated by bootmem for memory-hotremove. Some structures of memory management are allocated by bootmem. ex) memmap, etc. To remove memory physically, some of them must be freed according to circumstance. This patch set makes basis to free those pages, and free memmaps. Basic my idea is using remain members of struct page to remember information of users of bootmem (section number or node id). When the section is removing, kernel can confirm it. By this information, some issues can be solved. 1) When the memmap of removing section is allocated on other section by bootmem, it should/can be free. 2) When the memmap of removing section is allocated on the same section, it shouldn't be freed. Because the section has to be logical memory offlined already and all pages must be isolated against page allocater. If it is freed, page allocator may use it which will be removed physically soon. 3) When removing section has other section's memmap, kernel will be able to show easily which section should be removed before it for user. (Not implemented yet) 4) When the above case 2), the page isolation will be able to check and skip memmap's page when logical memory offline (offline_pages()). Current page isolation code fails in this case because this page is just reserved page and it can't distinguish this pages can be removed or not. But, it will be able to do by this patch. (Not implemented yet.) 5) The node information like pgdat has similar issues. But, this will be able to be solved too by this. (Not implemented yet, but, remembering node id in the pages.) Fortunately, current bootmem allocator just keeps PageReserved flags, and doesn't use any other members of page struct. The users of bootmem doesn't use them too. This patch: This is to register information which is node or section's id. Kernel can distinguish which node/section uses the pages allcated by bootmem. This is basis for hot-remove sections or nodes. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 05:13:31 -04:00
#ifndef CONFIG_SPARSEMEM_VMEMMAP
static void get_page_bootmem(unsigned long info, struct page *page, int type)
memory hotplug: register section/node id to free This patch set is to free pages which is allocated by bootmem for memory-hotremove. Some structures of memory management are allocated by bootmem. ex) memmap, etc. To remove memory physically, some of them must be freed according to circumstance. This patch set makes basis to free those pages, and free memmaps. Basic my idea is using remain members of struct page to remember information of users of bootmem (section number or node id). When the section is removing, kernel can confirm it. By this information, some issues can be solved. 1) When the memmap of removing section is allocated on other section by bootmem, it should/can be free. 2) When the memmap of removing section is allocated on the same section, it shouldn't be freed. Because the section has to be logical memory offlined already and all pages must be isolated against page allocater. If it is freed, page allocator may use it which will be removed physically soon. 3) When removing section has other section's memmap, kernel will be able to show easily which section should be removed before it for user. (Not implemented yet) 4) When the above case 2), the page isolation will be able to check and skip memmap's page when logical memory offline (offline_pages()). Current page isolation code fails in this case because this page is just reserved page and it can't distinguish this pages can be removed or not. But, it will be able to do by this patch. (Not implemented yet.) 5) The node information like pgdat has similar issues. But, this will be able to be solved too by this. (Not implemented yet, but, remembering node id in the pages.) Fortunately, current bootmem allocator just keeps PageReserved flags, and doesn't use any other members of page struct. The users of bootmem doesn't use them too. This patch: This is to register information which is node or section's id. Kernel can distinguish which node/section uses the pages allcated by bootmem. This is basis for hot-remove sections or nodes. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 05:13:31 -04:00
{
atomic_set(&page->_mapcount, type);
memory hotplug: register section/node id to free This patch set is to free pages which is allocated by bootmem for memory-hotremove. Some structures of memory management are allocated by bootmem. ex) memmap, etc. To remove memory physically, some of them must be freed according to circumstance. This patch set makes basis to free those pages, and free memmaps. Basic my idea is using remain members of struct page to remember information of users of bootmem (section number or node id). When the section is removing, kernel can confirm it. By this information, some issues can be solved. 1) When the memmap of removing section is allocated on other section by bootmem, it should/can be free. 2) When the memmap of removing section is allocated on the same section, it shouldn't be freed. Because the section has to be logical memory offlined already and all pages must be isolated against page allocater. If it is freed, page allocator may use it which will be removed physically soon. 3) When removing section has other section's memmap, kernel will be able to show easily which section should be removed before it for user. (Not implemented yet) 4) When the above case 2), the page isolation will be able to check and skip memmap's page when logical memory offline (offline_pages()). Current page isolation code fails in this case because this page is just reserved page and it can't distinguish this pages can be removed or not. But, it will be able to do by this patch. (Not implemented yet.) 5) The node information like pgdat has similar issues. But, this will be able to be solved too by this. (Not implemented yet, but, remembering node id in the pages.) Fortunately, current bootmem allocator just keeps PageReserved flags, and doesn't use any other members of page struct. The users of bootmem doesn't use them too. This patch: This is to register information which is node or section's id. Kernel can distinguish which node/section uses the pages allcated by bootmem. This is basis for hot-remove sections or nodes. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 05:13:31 -04:00
SetPagePrivate(page);
set_page_private(page, info);
atomic_inc(&page->_count);
}
void put_page_bootmem(struct page *page)
{
int type;
memory hotplug: register section/node id to free This patch set is to free pages which is allocated by bootmem for memory-hotremove. Some structures of memory management are allocated by bootmem. ex) memmap, etc. To remove memory physically, some of them must be freed according to circumstance. This patch set makes basis to free those pages, and free memmaps. Basic my idea is using remain members of struct page to remember information of users of bootmem (section number or node id). When the section is removing, kernel can confirm it. By this information, some issues can be solved. 1) When the memmap of removing section is allocated on other section by bootmem, it should/can be free. 2) When the memmap of removing section is allocated on the same section, it shouldn't be freed. Because the section has to be logical memory offlined already and all pages must be isolated against page allocater. If it is freed, page allocator may use it which will be removed physically soon. 3) When removing section has other section's memmap, kernel will be able to show easily which section should be removed before it for user. (Not implemented yet) 4) When the above case 2), the page isolation will be able to check and skip memmap's page when logical memory offline (offline_pages()). Current page isolation code fails in this case because this page is just reserved page and it can't distinguish this pages can be removed or not. But, it will be able to do by this patch. (Not implemented yet.) 5) The node information like pgdat has similar issues. But, this will be able to be solved too by this. (Not implemented yet, but, remembering node id in the pages.) Fortunately, current bootmem allocator just keeps PageReserved flags, and doesn't use any other members of page struct. The users of bootmem doesn't use them too. This patch: This is to register information which is node or section's id. Kernel can distinguish which node/section uses the pages allcated by bootmem. This is basis for hot-remove sections or nodes. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 05:13:31 -04:00
type = atomic_read(&page->_mapcount);
BUG_ON(type >= -1);
memory hotplug: register section/node id to free This patch set is to free pages which is allocated by bootmem for memory-hotremove. Some structures of memory management are allocated by bootmem. ex) memmap, etc. To remove memory physically, some of them must be freed according to circumstance. This patch set makes basis to free those pages, and free memmaps. Basic my idea is using remain members of struct page to remember information of users of bootmem (section number or node id). When the section is removing, kernel can confirm it. By this information, some issues can be solved. 1) When the memmap of removing section is allocated on other section by bootmem, it should/can be free. 2) When the memmap of removing section is allocated on the same section, it shouldn't be freed. Because the section has to be logical memory offlined already and all pages must be isolated against page allocater. If it is freed, page allocator may use it which will be removed physically soon. 3) When removing section has other section's memmap, kernel will be able to show easily which section should be removed before it for user. (Not implemented yet) 4) When the above case 2), the page isolation will be able to check and skip memmap's page when logical memory offline (offline_pages()). Current page isolation code fails in this case because this page is just reserved page and it can't distinguish this pages can be removed or not. But, it will be able to do by this patch. (Not implemented yet.) 5) The node information like pgdat has similar issues. But, this will be able to be solved too by this. (Not implemented yet, but, remembering node id in the pages.) Fortunately, current bootmem allocator just keeps PageReserved flags, and doesn't use any other members of page struct. The users of bootmem doesn't use them too. This patch: This is to register information which is node or section's id. Kernel can distinguish which node/section uses the pages allcated by bootmem. This is basis for hot-remove sections or nodes. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 05:13:31 -04:00
if (atomic_dec_return(&page->_count) == 1) {
ClearPagePrivate(page);
set_page_private(page, 0);
reset_page_mapcount(page);
__free_pages_bootmem(page, 0);
}
}
static void register_page_bootmem_info_section(unsigned long start_pfn)
memory hotplug: register section/node id to free This patch set is to free pages which is allocated by bootmem for memory-hotremove. Some structures of memory management are allocated by bootmem. ex) memmap, etc. To remove memory physically, some of them must be freed according to circumstance. This patch set makes basis to free those pages, and free memmaps. Basic my idea is using remain members of struct page to remember information of users of bootmem (section number or node id). When the section is removing, kernel can confirm it. By this information, some issues can be solved. 1) When the memmap of removing section is allocated on other section by bootmem, it should/can be free. 2) When the memmap of removing section is allocated on the same section, it shouldn't be freed. Because the section has to be logical memory offlined already and all pages must be isolated against page allocater. If it is freed, page allocator may use it which will be removed physically soon. 3) When removing section has other section's memmap, kernel will be able to show easily which section should be removed before it for user. (Not implemented yet) 4) When the above case 2), the page isolation will be able to check and skip memmap's page when logical memory offline (offline_pages()). Current page isolation code fails in this case because this page is just reserved page and it can't distinguish this pages can be removed or not. But, it will be able to do by this patch. (Not implemented yet.) 5) The node information like pgdat has similar issues. But, this will be able to be solved too by this. (Not implemented yet, but, remembering node id in the pages.) Fortunately, current bootmem allocator just keeps PageReserved flags, and doesn't use any other members of page struct. The users of bootmem doesn't use them too. This patch: This is to register information which is node or section's id. Kernel can distinguish which node/section uses the pages allcated by bootmem. This is basis for hot-remove sections or nodes. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 05:13:31 -04:00
{
unsigned long *usemap, mapsize, section_nr, i;
struct mem_section *ms;
struct page *page, *memmap;
if (!pfn_valid(start_pfn))
return;
section_nr = pfn_to_section_nr(start_pfn);
ms = __nr_to_section(section_nr);
/* Get section's memmap address */
memmap = sparse_decode_mem_map(ms->section_mem_map, section_nr);
/*
* Get page for the memmap's phys address
* XXX: need more consideration for sparse_vmemmap...
*/
page = virt_to_page(memmap);
mapsize = sizeof(struct page) * PAGES_PER_SECTION;
mapsize = PAGE_ALIGN(mapsize) >> PAGE_SHIFT;
/* remember memmap's page */
for (i = 0; i < mapsize; i++, page++)
get_page_bootmem(section_nr, page, SECTION_INFO);
usemap = __nr_to_section(section_nr)->pageblock_flags;
page = virt_to_page(usemap);
mapsize = PAGE_ALIGN(usemap_size()) >> PAGE_SHIFT;
for (i = 0; i < mapsize; i++, page++)
get_page_bootmem(section_nr, page, MIX_SECTION_INFO);
memory hotplug: register section/node id to free This patch set is to free pages which is allocated by bootmem for memory-hotremove. Some structures of memory management are allocated by bootmem. ex) memmap, etc. To remove memory physically, some of them must be freed according to circumstance. This patch set makes basis to free those pages, and free memmaps. Basic my idea is using remain members of struct page to remember information of users of bootmem (section number or node id). When the section is removing, kernel can confirm it. By this information, some issues can be solved. 1) When the memmap of removing section is allocated on other section by bootmem, it should/can be free. 2) When the memmap of removing section is allocated on the same section, it shouldn't be freed. Because the section has to be logical memory offlined already and all pages must be isolated against page allocater. If it is freed, page allocator may use it which will be removed physically soon. 3) When removing section has other section's memmap, kernel will be able to show easily which section should be removed before it for user. (Not implemented yet) 4) When the above case 2), the page isolation will be able to check and skip memmap's page when logical memory offline (offline_pages()). Current page isolation code fails in this case because this page is just reserved page and it can't distinguish this pages can be removed or not. But, it will be able to do by this patch. (Not implemented yet.) 5) The node information like pgdat has similar issues. But, this will be able to be solved too by this. (Not implemented yet, but, remembering node id in the pages.) Fortunately, current bootmem allocator just keeps PageReserved flags, and doesn't use any other members of page struct. The users of bootmem doesn't use them too. This patch: This is to register information which is node or section's id. Kernel can distinguish which node/section uses the pages allcated by bootmem. This is basis for hot-remove sections or nodes. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 05:13:31 -04:00
}
void register_page_bootmem_info_node(struct pglist_data *pgdat)
{
unsigned long i, pfn, end_pfn, nr_pages;
int node = pgdat->node_id;
struct page *page;
struct zone *zone;
nr_pages = PAGE_ALIGN(sizeof(struct pglist_data)) >> PAGE_SHIFT;
page = virt_to_page(pgdat);
for (i = 0; i < nr_pages; i++, page++)
get_page_bootmem(node, page, NODE_INFO);
zone = &pgdat->node_zones[0];
for (; zone < pgdat->node_zones + MAX_NR_ZONES - 1; zone++) {
if (zone->wait_table) {
nr_pages = zone->wait_table_hash_nr_entries
* sizeof(wait_queue_head_t);
nr_pages = PAGE_ALIGN(nr_pages) >> PAGE_SHIFT;
page = virt_to_page(zone->wait_table);
for (i = 0; i < nr_pages; i++, page++)
get_page_bootmem(node, page, NODE_INFO);
}
}
pfn = pgdat->node_start_pfn;
end_pfn = pfn + pgdat->node_spanned_pages;
/* register_section info */
for (; pfn < end_pfn; pfn += PAGES_PER_SECTION)
register_page_bootmem_info_section(pfn);
}
#endif /* !CONFIG_SPARSEMEM_VMEMMAP */
memory_hotplug: always initialize pageblock bitmap Trying to online a new memory section that was added via memory hotplug sometimes results in crashes when the new pages are added via __free_page. Reason for that is that the pageblock bitmap isn't initialized and hence contains random stuff. That means that get_pageblock_migratetype() returns also random stuff and therefore list_add(&page->lru, &zone->free_area[order].free_list[migratetype]); in __free_one_page() tries to do a list_add to something that isn't even necessarily a list. This happens since 86051ca5eaf5e560113ec7673462804c54284456 ("mm: fix usemap initialization") which makes sure that the pageblock bitmap gets only initialized for pages present in a zone. Unfortunately for hot-added memory the zones "grow" after the memmap and the pageblock memmap have been initialized. Which means that the new pages have an unitialized bitmap. To solve this the calls to grow_zone_span() and grow_pgdat_span() are moved to __add_zone() just before the initialization happens. The patch also moves the two functions since __add_zone() is the only caller and I didn't want to add a forward declaration. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 19:05:52 -04:00
static void grow_zone_span(struct zone *zone, unsigned long start_pfn,
unsigned long end_pfn)
{
unsigned long old_zone_end_pfn;
zone_span_writelock(zone);
old_zone_end_pfn = zone->zone_start_pfn + zone->spanned_pages;
if (start_pfn < zone->zone_start_pfn)
zone->zone_start_pfn = start_pfn;
zone->spanned_pages = max(old_zone_end_pfn, end_pfn) -
zone->zone_start_pfn;
zone_span_writeunlock(zone);
}
static void grow_pgdat_span(struct pglist_data *pgdat, unsigned long start_pfn,
unsigned long end_pfn)
{
unsigned long old_pgdat_end_pfn =
pgdat->node_start_pfn + pgdat->node_spanned_pages;
if (start_pfn < pgdat->node_start_pfn)
pgdat->node_start_pfn = start_pfn;
pgdat->node_spanned_pages = max(old_pgdat_end_pfn, end_pfn) -
pgdat->node_start_pfn;
}
static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int nr_pages = PAGES_PER_SECTION;
int nid = pgdat->node_id;
int zone_type;
memory_hotplug: always initialize pageblock bitmap Trying to online a new memory section that was added via memory hotplug sometimes results in crashes when the new pages are added via __free_page. Reason for that is that the pageblock bitmap isn't initialized and hence contains random stuff. That means that get_pageblock_migratetype() returns also random stuff and therefore list_add(&page->lru, &zone->free_area[order].free_list[migratetype]); in __free_one_page() tries to do a list_add to something that isn't even necessarily a list. This happens since 86051ca5eaf5e560113ec7673462804c54284456 ("mm: fix usemap initialization") which makes sure that the pageblock bitmap gets only initialized for pages present in a zone. Unfortunately for hot-added memory the zones "grow" after the memmap and the pageblock memmap have been initialized. Which means that the new pages have an unitialized bitmap. To solve this the calls to grow_zone_span() and grow_pgdat_span() are moved to __add_zone() just before the initialization happens. The patch also moves the two functions since __add_zone() is the only caller and I didn't want to add a forward declaration. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 19:05:52 -04:00
unsigned long flags;
zone_type = zone - pgdat->node_zones;
memory_hotplug: always initialize pageblock bitmap Trying to online a new memory section that was added via memory hotplug sometimes results in crashes when the new pages are added via __free_page. Reason for that is that the pageblock bitmap isn't initialized and hence contains random stuff. That means that get_pageblock_migratetype() returns also random stuff and therefore list_add(&page->lru, &zone->free_area[order].free_list[migratetype]); in __free_one_page() tries to do a list_add to something that isn't even necessarily a list. This happens since 86051ca5eaf5e560113ec7673462804c54284456 ("mm: fix usemap initialization") which makes sure that the pageblock bitmap gets only initialized for pages present in a zone. Unfortunately for hot-added memory the zones "grow" after the memmap and the pageblock memmap have been initialized. Which means that the new pages have an unitialized bitmap. To solve this the calls to grow_zone_span() and grow_pgdat_span() are moved to __add_zone() just before the initialization happens. The patch also moves the two functions since __add_zone() is the only caller and I didn't want to add a forward declaration. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 19:05:52 -04:00
if (!zone->wait_table) {
int ret;
ret = init_currently_empty_zone(zone, phys_start_pfn,
nr_pages, MEMMAP_HOTPLUG);
if (ret)
return ret;
}
pgdat_resize_lock(zone->zone_pgdat, &flags);
grow_zone_span(zone, phys_start_pfn, phys_start_pfn + nr_pages);
grow_pgdat_span(zone->zone_pgdat, phys_start_pfn,
phys_start_pfn + nr_pages);
pgdat_resize_unlock(zone->zone_pgdat, &flags);
memmap_init_zone(nr_pages, nid, zone_type,
phys_start_pfn, MEMMAP_HOTPLUG);
return 0;
}
static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
{
int nr_pages = PAGES_PER_SECTION;
int ret;
if (pfn_valid(phys_start_pfn))
return -EEXIST;
ret = sparse_add_one_section(zone, phys_start_pfn, nr_pages);
if (ret < 0)
return ret;
ret = __add_zone(zone, phys_start_pfn);
if (ret < 0)
return ret;
return register_new_memory(__pfn_to_section(phys_start_pfn));
}
#ifdef CONFIG_SPARSEMEM_VMEMMAP
static int __remove_section(struct zone *zone, struct mem_section *ms)
{
/*
* XXX: Freeing memmap with vmemmap is not implement yet.
* This should be removed later.
*/
return -EBUSY;
}
#else
static int __remove_section(struct zone *zone, struct mem_section *ms)
{
unsigned long flags;
struct pglist_data *pgdat = zone->zone_pgdat;
int ret = -EINVAL;
if (!valid_section(ms))
return ret;
ret = unregister_memory_section(ms);
if (ret)
return ret;
pgdat_resize_lock(pgdat, &flags);
sparse_remove_one_section(zone, ms);
pgdat_resize_unlock(pgdat, &flags);
return 0;
}
#endif
/*
* Reasonably generic function for adding memory. It is
* expected that archs that support memory hotplug will
* call this function after deciding the zone to which to
* add the new pages.
*/
int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
unsigned long nr_pages)
{
unsigned long i;
int err = 0;
int start_sec, end_sec;
/* during initialize mem_map, align hot-added range to section */
start_sec = pfn_to_section_nr(phys_start_pfn);
end_sec = pfn_to_section_nr(phys_start_pfn + nr_pages - 1);
for (i = start_sec; i <= end_sec; i++) {
err = __add_section(zone, i << PFN_SECTION_SHIFT);
/*
* EEXIST is finally dealt with by ioresource collision
* check. see add_memory() => register_memory_resource()
* Warning will be printed if there is collision.
*/
if (err && (err != -EEXIST))
break;
err = 0;
}
return err;
}
EXPORT_SYMBOL_GPL(__add_pages);
/**
* __remove_pages() - remove sections of pages from a zone
* @zone: zone from which pages need to be removed
* @phys_start_pfn: starting pageframe (must be aligned to start of a section)
* @nr_pages: number of pages to remove (must be multiple of section size)
*
* Generic helper function to remove section mappings and sysfs entries
* for the section of the memory we are removing. Caller needs to make
* sure that pages are marked reserved and zones are adjust properly by
* calling offline_pages().
*/
int __remove_pages(struct zone *zone, unsigned long phys_start_pfn,
unsigned long nr_pages)
{
unsigned long i, ret = 0;
int sections_to_remove;
/*
* We can only remove entire sections
*/
BUG_ON(phys_start_pfn & ~PAGE_SECTION_MASK);
BUG_ON(nr_pages % PAGES_PER_SECTION);
release_mem_region(phys_start_pfn << PAGE_SHIFT, nr_pages * PAGE_SIZE);
sections_to_remove = nr_pages / PAGES_PER_SECTION;
for (i = 0; i < sections_to_remove; i++) {
unsigned long pfn = phys_start_pfn + i*PAGES_PER_SECTION;
ret = __remove_section(zone, __pfn_to_section(pfn));
if (ret)
break;
}
return ret;
}
EXPORT_SYMBOL_GPL(__remove_pages);
void online_page(struct page *page)
{
totalram_pages++;
num_physpages++;
#ifdef CONFIG_HIGHMEM
if (PageHighMem(page))
totalhigh_pages++;
#endif
#ifdef CONFIG_FLATMEM
max_mapnr = max(page_to_pfn(page), max_mapnr);
#endif
ClearPageReserved(page);
init_page_count(page);
__free_page(page);
}
static int online_pages_range(unsigned long start_pfn, unsigned long nr_pages,
void *arg)
{
unsigned long i;
unsigned long onlined_pages = *(unsigned long *)arg;
struct page *page;
if (PageReserved(pfn_to_page(start_pfn)))
for (i = 0; i < nr_pages; i++) {
page = pfn_to_page(start_pfn + i);
online_page(page);
onlined_pages++;
}
*(unsigned long *)arg = onlined_pages;
return 0;
}
int online_pages(unsigned long pfn, unsigned long nr_pages)
{
unsigned long onlined_pages = 0;
struct zone *zone;
int need_zonelists_rebuild = 0;
int nid;
int ret;
struct memory_notify arg;
arg.start_pfn = pfn;
arg.nr_pages = nr_pages;
arg.status_change_nid = -1;
nid = page_to_nid(pfn_to_page(pfn));
if (node_present_pages(nid) == 0)
arg.status_change_nid = nid;
ret = memory_notify(MEM_GOING_ONLINE, &arg);
ret = notifier_to_errno(ret);
if (ret) {
memory_notify(MEM_CANCEL_ONLINE, &arg);
return ret;
}
/*
* This doesn't need a lock to do pfn_to_page().
* The section can't be removed here because of the
* memory_block->state_mutex.
*/
zone = page_zone(pfn_to_page(pfn));
/*
* If this zone is not populated, then it is not in zonelist.
* This means the page allocator ignores this zone.
* So, zonelist must be updated after online.
*/
if (!populated_zone(zone))
need_zonelists_rebuild = 1;
ret = walk_memory_resource(pfn, nr_pages, &onlined_pages,
online_pages_range);
if (ret) {
printk(KERN_DEBUG "online_pages %lx at %lx failed\n",
nr_pages, pfn);
memory_notify(MEM_CANCEL_ONLINE, &arg);
return ret;
}
zone->present_pages += onlined_pages;
zone->zone_pgdat->node_present_pages += onlined_pages;
setup_per_zone_pages_min();
if (onlined_pages) {
kswapd_run(zone_to_nid(zone));
node_set_state(zone_to_nid(zone), N_HIGH_MEMORY);
}
if (need_zonelists_rebuild)
build_all_zonelists();
else
vm_total_pages = nr_free_pagecache_pages();
writeback_set_ratelimit();
if (onlined_pages)
memory_notify(MEM_ONLINE, &arg);
return 0;
}
#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
[PATCH] pgdat allocation for new node add (call pgdat allocation) Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 05:53:34 -04:00
static pg_data_t *hotadd_new_pgdat(int nid, u64 start)
{
struct pglist_data *pgdat;
unsigned long zones_size[MAX_NR_ZONES] = {0};
unsigned long zholes_size[MAX_NR_ZONES] = {0};
unsigned long start_pfn = start >> PAGE_SHIFT;
pgdat = arch_alloc_nodedata(nid);
if (!pgdat)
return NULL;
arch_refresh_nodedata(nid, pgdat);
/* we can use NODE_DATA(nid) from here */
/* init node's zones as empty zones, we don't have any present pages.*/
free_area_init_node(nid, zones_size, start_pfn, zholes_size);
[PATCH] pgdat allocation for new node add (call pgdat allocation) Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 05:53:34 -04:00
return pgdat;
}
static void rollback_node_hotadd(int nid, pg_data_t *pgdat)
{
arch_refresh_nodedata(nid, NULL);
arch_free_nodedata(pgdat);
return;
}
int add_memory(int nid, u64 start, u64 size)
{
[PATCH] pgdat allocation for new node add (call pgdat allocation) Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 05:53:34 -04:00
pg_data_t *pgdat = NULL;
int new_pgdat = 0;
struct resource *res;
int ret;
res = register_memory_resource(start, size);
if (!res)
return -EEXIST;
[PATCH] pgdat allocation for new node add (call pgdat allocation) Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 05:53:34 -04:00
if (!node_online(nid)) {
pgdat = hotadd_new_pgdat(nid, start);
if (!pgdat)
return -ENOMEM;
new_pgdat = 1;
}
/* call arch's memory hotadd */
ret = arch_add_memory(nid, start, size);
[PATCH] pgdat allocation for new node add (call pgdat allocation) Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 05:53:34 -04:00
if (ret < 0)
goto error;
/* we online node here. we can't roll back from here. */
[PATCH] pgdat allocation for new node add (call pgdat allocation) Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 05:53:34 -04:00
node_set_online(nid);
[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_map Change the list of memory nodes allowed to tasks in the top (root) nodeset to dynamically track what cpus are online, using a call to a cpuset hook from the memory hotplug code. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support memory hotplug, then these tasks cannot make use of memory nodes that are added after system boot, because the memory nodes are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. One key motivation for this change is to remain consistent with the behaviour for the top_cpuset's 'cpus', which is also read-only, and which automatically tracks the cpu_online_map. This change also has the minor benefit that it fixes a long standing, little noticed, minor bug in cpusets. The cpuset performance tweak to short circuit the cpuset_zone_allowed() check on systems with just a single cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply changing the 'mems' of the top_cpuset had no affect, even though the change (the write system call) appeared to succeed. With the following change, that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly refuses to be changed via user space writes. Thus no one should be mislead into thinking they've changed the top_cpusets's 'mems' when in affect they haven't. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'mems' file in the top (root) cpuset, making it read only, and making it automatically track the value of node_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged memory nodes allowed by their cpuset. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 05:01:16 -04:00
cpuset_track_online_nodes();
if (new_pgdat) {
ret = register_one_node(nid);
/*
* If sysfs file of new node can't create, cpu on the node
* can't be hot-added. There is no rollback way now.
* So, check by BUG_ON() to catch it reluctantly..
*/
BUG_ON(ret);
}
[PATCH] pgdat allocation for new node add (call pgdat allocation) Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 05:53:34 -04:00
return ret;
error:
/* rollback pgdat allocation and others */
if (new_pgdat)
rollback_node_hotadd(nid, pgdat);
if (res)
release_memory_resource(res);
[PATCH] pgdat allocation for new node add (call pgdat allocation) Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 05:53:34 -04:00
return ret;
}
EXPORT_SYMBOL_GPL(add_memory);
#ifdef CONFIG_MEMORY_HOTREMOVE
memory-hotplug: add sysfs removable attribute for hotplug memory remove Memory may be hot-removed on a per-memory-block basis, particularly on POWER where the SPARSEMEM section size often matches the memory-block size. A user-level agent must be able to identify which sections of memory are likely to be removable before attempting the potentially expensive operation. This patch adds a file called "removable" to the memory directory in sysfs to help such an agent. In this patch, a memory block is considered removable if; o It contains only MOVABLE pageblocks o It contains only pageblocks with free pages regardless of pageblock type On the other hand, a memory block starting with a PageReserved() page will never be considered removable. Without this patch, the user-agent is forced to choose a memory block to remove randomly. Sample output of the sysfs files: ./memory/memory0/removable: 0 ./memory/memory1/removable: 0 ./memory/memory2/removable: 0 ./memory/memory3/removable: 0 ./memory/memory4/removable: 0 ./memory/memory5/removable: 0 ./memory/memory6/removable: 0 ./memory/memory7/removable: 1 ./memory/memory8/removable: 0 ./memory/memory9/removable: 0 ./memory/memory10/removable: 0 ./memory/memory11/removable: 0 ./memory/memory12/removable: 0 ./memory/memory13/removable: 0 ./memory/memory14/removable: 0 ./memory/memory15/removable: 0 ./memory/memory16/removable: 0 ./memory/memory17/removable: 1 ./memory/memory18/removable: 1 ./memory/memory19/removable: 1 ./memory/memory20/removable: 1 ./memory/memory21/removable: 1 ./memory/memory22/removable: 1 Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 00:28:19 -04:00
/*
* A free page on the buddy free lists (not the per-cpu lists) has PageBuddy
* set and the size of the free page is given by page_order(). Using this,
* the function determines if the pageblock contains only free pages.
* Due to buddy contraints, a free page at least the size of a pageblock will
* be located at the start of the pageblock
*/
static inline int pageblock_free(struct page *page)
{
return PageBuddy(page) && page_order(page) >= pageblock_order;
}
/* Return the start of the next active pageblock after a given page */
static struct page *next_active_pageblock(struct page *page)
{
int pageblocks_stride;
/* Ensure the starting page is pageblock-aligned */
BUG_ON(page_to_pfn(page) & (pageblock_nr_pages - 1));
/* Move forward by at least 1 * pageblock_nr_pages */
pageblocks_stride = 1;
/* If the entire pageblock is free, move to the end of free page */
if (pageblock_free(page))
pageblocks_stride += page_order(page) - pageblock_order;
return page + (pageblocks_stride * pageblock_nr_pages);
}
/* Checks if this range of memory is likely to be hot-removable. */
int is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
{
int type;
struct page *page = pfn_to_page(start_pfn);
struct page *end_page = page + nr_pages;
/* Check the starting page of each pageblock within the range */
for (; page < end_page; page = next_active_pageblock(page)) {
type = get_pageblock_migratetype(page);
/*
* A pageblock containing MOVABLE or free pages is considered
* removable
*/
if (type != MIGRATE_MOVABLE && !pageblock_free(page))
return 0;
/*
* A pageblock starting with a PageReserved page is not
* considered removable.
*/
if (PageReserved(page))
return 0;
}
/* All pageblocks in the memory block are likely to be hot-removable */
return 1;
}
/*
* Confirm all pages in a range [start, end) is belongs to the same zone.
*/
static int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn)
{
unsigned long pfn;
struct zone *zone = NULL;
struct page *page;
int i;
for (pfn = start_pfn;
pfn < end_pfn;
pfn += MAX_ORDER_NR_PAGES) {
i = 0;
/* This is just a CONFIG_HOLES_IN_ZONE check.*/
while ((i < MAX_ORDER_NR_PAGES) && !pfn_valid_within(pfn + i))
i++;
if (i == MAX_ORDER_NR_PAGES)
continue;
page = pfn_to_page(pfn + i);
if (zone && page_zone(page) != zone)
return 0;
zone = page_zone(page);
}
return 1;
}
/*
* Scanning pfn is much easier than scanning lru list.
* Scan pfn from start to end and Find LRU page.
*/
int scan_lru_pages(unsigned long start, unsigned long end)
{
unsigned long pfn;
struct page *page;
for (pfn = start; pfn < end; pfn++) {
if (pfn_valid(pfn)) {
page = pfn_to_page(pfn);
if (PageLRU(page))
return pfn;
}
}
return 0;
}
static struct page *
hotremove_migrate_alloc(struct page *page,
unsigned long private,
int **x)
{
/* This should be improoooooved!! */
return alloc_page(GFP_HIGHUSER_PAGECACHE);
}
#define NR_OFFLINE_AT_ONCE_PAGES (256)
static int
do_migrate_range(unsigned long start_pfn, unsigned long end_pfn)
{
unsigned long pfn;
struct page *page;
int move_pages = NR_OFFLINE_AT_ONCE_PAGES;
int not_managed = 0;
int ret = 0;
LIST_HEAD(source);
for (pfn = start_pfn; pfn < end_pfn && move_pages > 0; pfn++) {
if (!pfn_valid(pfn))
continue;
page = pfn_to_page(pfn);
if (!page_count(page))
continue;
/*
* We can skip free pages. And we can only deal with pages on
* LRU.
*/
ret = isolate_lru_page(page, &source);
if (!ret) { /* Success */
move_pages--;
} else {
/* Becasue we don't have big zone->lock. we should
check this again here. */
if (page_count(page))
not_managed++;
#ifdef CONFIG_DEBUG_VM
printk(KERN_INFO "removing from LRU failed"
" %lx/%d/%lx\n",
pfn, page_count(page), page->flags);
#endif
}
}
ret = -EBUSY;
if (not_managed) {
if (!list_empty(&source))
putback_lru_pages(&source);
goto out;
}
ret = 0;
if (list_empty(&source))
goto out;
/* this function returns # of failed pages */
ret = migrate_pages(&source, hotremove_migrate_alloc, 0);
out:
return ret;
}
/*
* remove from free_area[] and mark all as Reserved.
*/
static int
offline_isolated_pages_cb(unsigned long start, unsigned long nr_pages,
void *data)
{
__offline_isolated_pages(start, start + nr_pages);
return 0;
}
static void
offline_isolated_pages(unsigned long start_pfn, unsigned long end_pfn)
{
walk_memory_resource(start_pfn, end_pfn - start_pfn, NULL,
offline_isolated_pages_cb);
}
/*
* Check all pages in range, recoreded as memory resource, are isolated.
*/
static int
check_pages_isolated_cb(unsigned long start_pfn, unsigned long nr_pages,
void *data)
{
int ret;
long offlined = *(long *)data;
ret = test_pages_isolated(start_pfn, start_pfn + nr_pages);
offlined = nr_pages;
if (!ret)
*(long *)data += offlined;
return ret;
}
static long
check_pages_isolated(unsigned long start_pfn, unsigned long end_pfn)
{
long offlined = 0;
int ret;
ret = walk_memory_resource(start_pfn, end_pfn - start_pfn, &offlined,
check_pages_isolated_cb);
if (ret < 0)
offlined = (long)ret;
return offlined;
}
int offline_pages(unsigned long start_pfn,
unsigned long end_pfn, unsigned long timeout)
{
unsigned long pfn, nr_pages, expire;
long offlined_pages;
int ret, drain, retry_max, node;
struct zone *zone;
struct memory_notify arg;
BUG_ON(start_pfn >= end_pfn);
/* at least, alignment against pageblock is necessary */
if (!IS_ALIGNED(start_pfn, pageblock_nr_pages))
return -EINVAL;
if (!IS_ALIGNED(end_pfn, pageblock_nr_pages))
return -EINVAL;
/* This makes hotplug much easier...and readable.
we assume this for now. .*/
if (!test_pages_in_a_zone(start_pfn, end_pfn))
return -EINVAL;
zone = page_zone(pfn_to_page(start_pfn));
node = zone_to_nid(zone);
nr_pages = end_pfn - start_pfn;
/* set above range as isolated */
ret = start_isolate_page_range(start_pfn, end_pfn);
if (ret)
return ret;
arg.start_pfn = start_pfn;
arg.nr_pages = nr_pages;
arg.status_change_nid = -1;
if (nr_pages >= node_present_pages(node))
arg.status_change_nid = node;
ret = memory_notify(MEM_GOING_OFFLINE, &arg);
ret = notifier_to_errno(ret);
if (ret)
goto failed_removal;
pfn = start_pfn;
expire = jiffies + timeout;
drain = 0;
retry_max = 5;
repeat:
/* start memory hot removal */
ret = -EAGAIN;
if (time_after(jiffies, expire))
goto failed_removal;
ret = -EINTR;
if (signal_pending(current))
goto failed_removal;
ret = 0;
if (drain) {
lru_add_drain_all();
flush_scheduled_work();
cond_resched();
drain_all_pages();
}
pfn = scan_lru_pages(start_pfn, end_pfn);
if (pfn) { /* We have page on LRU */
ret = do_migrate_range(pfn, end_pfn);
if (!ret) {
drain = 1;
goto repeat;
} else {
if (ret < 0)
if (--retry_max == 0)
goto failed_removal;
yield();
drain = 1;
goto repeat;
}
}
/* drain all zone's lru pagevec, this is asyncronous... */
lru_add_drain_all();
flush_scheduled_work();
yield();
/* drain pcp pages , this is synchrouns. */
drain_all_pages();
/* check again */
offlined_pages = check_pages_isolated(start_pfn, end_pfn);
if (offlined_pages < 0) {
ret = -EBUSY;
goto failed_removal;
}
printk(KERN_INFO "Offlined Pages %ld\n", offlined_pages);
/* Ok, all of our target is islaoted.
We cannot do rollback at this point. */
offline_isolated_pages(start_pfn, end_pfn);
/* reset pagetype flags and makes migrate type to be MOVABLE */
undo_isolate_page_range(start_pfn, end_pfn);
/* removal success */
zone->present_pages -= offlined_pages;
zone->zone_pgdat->node_present_pages -= offlined_pages;
totalram_pages -= offlined_pages;
num_physpages -= offlined_pages;
vm_total_pages = nr_free_pagecache_pages();
writeback_set_ratelimit();
memory_notify(MEM_OFFLINE, &arg);
return 0;
failed_removal:
printk(KERN_INFO "memory offlining %lx to %lx failed\n",
start_pfn, end_pfn);
memory_notify(MEM_CANCEL_OFFLINE, &arg);
/* pushback to free area */
undo_isolate_page_range(start_pfn, end_pfn);
return ret;
}
#else
int remove_memory(u64 start, u64 size)
{
return -EINVAL;
}
EXPORT_SYMBOL_GPL(remove_memory);
#endif /* CONFIG_MEMORY_HOTREMOVE */