lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a7e9c45219
android_kernel_xiaomi_sm8350/drivers/firewire/Kconfig

70 lines
2.1 KiB
Plaintext
Raw Normal View History

firewire, ieee1394: update Kconfig help Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-25 19:36:53 -05:00
menu "IEEE 1394 (FireWire) support"
depends on PCI || BROKEN
# firewire-core does not depend on PCI but is
# not useful without PCI controller driver
firewire: new stack is no longer experimental The new stack is now recommended over the old one if used for industrial video (IIDC/DCAM) or for storage devices (SBP-2) due to better performance, improved compatibility, added features, and security. It should also be functionally on par with and is more secure than the old ieee1394 stack in the use case of consumer video devices. IP-over-1394 support for the new stack is currently emerging, and a backend of the firedtv DVB driver to the new stack should be available soon. The one remaining area where the old stack is still required are audio devices, as the new stack is not yet able to support the FFADO FireWire audio framework. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16 16:36:34 -04:00
comment "You can enable one or both FireWire driver stacks."
firewire, ieee1394: update Kconfig help Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-25 19:36:53 -05:00
comment "The newer stack is recommended."
firewire: Kconfig menu touch-up Emphasize the recommendation to build only one stack. Trim the prompts to better fit into short attention spans. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-06-14 08:24:53 -04:00
firewire: rename CONFIG_FW to CONFIG_FIREWIRE to avoid confusion with CONFIG_FW_LOADER. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-03-17 20:39:28 -04:00
config FIREWIRE
firewire: new stack is no longer experimental The new stack is now recommended over the old one if used for industrial video (IIDC/DCAM) or for storage devices (SBP-2) due to better performance, improved compatibility, added features, and security. It should also be functionally on par with and is more secure than the old ieee1394 stack in the use case of consumer video devices. IP-over-1394 support for the new stack is currently emerging, and a backend of the firedtv DVB driver to the new stack should be available soon. The one remaining area where the old stack is still required are audio devices, as the new stack is not yet able to support the FFADO FireWire audio framework. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16 16:36:34 -04:00
tristate "FireWire driver stack"
firewire: Use lib/ implementation of CRC ITU-T. With the CRC ITU-T implementation available in lib/ we can use that instead. This also fixes a bug in the topology map crc computation. Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed Kconfig)
2007-05-07 20:33:31 -04:00
select CRC_ITU_T
firewire: Add core firewire stack. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-19 19:58:27 -05:00
help
firewire: new stack is no longer experimental The new stack is now recommended over the old one if used for industrial video (IIDC/DCAM) or for storage devices (SBP-2) due to better performance, improved compatibility, added features, and security. It should also be functionally on par with and is more secure than the old ieee1394 stack in the use case of consumer video devices. IP-over-1394 support for the new stack is currently emerging, and a backend of the firedtv DVB driver to the new stack should be available soon. The one remaining area where the old stack is still required are audio devices, as the new stack is not yet able to support the FFADO FireWire audio framework. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16 16:36:34 -04:00
This is the new-generation IEEE 1394 (FireWire) driver stack
a.k.a. Juju, a new implementation designed for robustness and
simplicity.
See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
for information about migration from the older Linux 1394 stack
to the new driver stack.
firewire: Add core firewire stack. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-19 19:58:27 -05:00
firewire: add Kconfig help on building both stacks Alas that won't work so good, because nobody reads help texts. I thought about adding some crude multiple choice selection (build the old stack, build the new stack, build both stacks). It's possible, but it would introduce awkward dummy config variables. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-06-25 16:18:40 -04:00
To compile this driver as a module, say M here: the module will be
firewire: state userland requirements in Kconfig help Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-25 10:24:19 -04:00
called firewire-core.
firewire: rename CONFIG_FW to CONFIG_FIREWIRE to avoid confusion with CONFIG_FW_LOADER. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-03-17 20:39:28 -04:00
config FIREWIRE_OHCI
firewire: Kconfig menu touch-up Emphasize the recommendation to build only one stack. Trim the prompts to better fit into short attention spans. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-06-14 08:24:53 -04:00
tristate "OHCI-1394 controllers"
firewire: rename CONFIG_FW to CONFIG_FIREWIRE to avoid confusion with CONFIG_FW_LOADER. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-03-17 20:39:28 -04:00
depends on PCI && FIREWIRE
firewire: Add driver for OHCI firewire host controllers. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-19 19:58:35 -05:00
help
firewire: typo in Kconfig Correct a typo. Also spell FireWire consistently. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-01-04 12:35:00 -05:00
Enable this driver if you have a FireWire controller based
firewire: Add driver for OHCI firewire host controllers. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-19 19:58:35 -05:00
on the OHCI specification. For all practical purposes, this
is the only chipset in use, so say Y here.
firewire: additional help in Kconfig Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-01-07 16:33:59 -05:00
To compile this driver as a module, say M here: The module will be
firewire, ieee1394: update Kconfig help Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-25 19:36:53 -05:00
called firewire-ohci.
firewire: Add driver for OHCI firewire host controllers. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-19 19:58:35 -05:00
firewire: debug interrupt events This adds debug printks for asynchronous transmission and reception and for self ID reception. They can be enabled at module load time, and at runtime via /sys/module/firewire_ohci/parameters/debug. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Also added: Logging of interrupt event codes and of cancelled AT packets. The code now depends on a Kconfig variable. This makes it easier to build firewire-ohci without the feature or to make it an option in the future. The variable is currently hidden and always on. This feature inflates firewire-ohci.ko by 7 kB = 27% on x86-64 and by 4 kB = 23% on i686. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-20 17:04:36 -04:00
config FIREWIRE_OHCI_DEBUG
bool
depends on FIREWIRE_OHCI
default y
firewire: rename CONFIG_FW to CONFIG_FIREWIRE to avoid confusion with CONFIG_FW_LOADER. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-03-17 20:39:28 -04:00
config FIREWIRE_SBP2
firewire: Kconfig menu touch-up Emphasize the recommendation to build only one stack. Trim the prompts to better fit into short attention spans. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-06-14 08:24:53 -04:00
tristate "Storage devices (SBP-2 protocol)"
firewire: rename CONFIG_FW to CONFIG_FIREWIRE to avoid confusion with CONFIG_FW_LOADER. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-03-17 20:39:28 -04:00
depends on FIREWIRE && SCSI
firewire: Add SBP-2 protocol driver for storage devices. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-19 19:58:40 -05:00
help
firewire: typo in Kconfig Correct a typo. Also spell FireWire consistently. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-01-04 12:35:00 -05:00
This option enables you to use SBP-2 devices connected to a
FireWire bus. SBP-2 devices include storage devices like
firewire: Add SBP-2 protocol driver for storage devices. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-19 19:58:40 -05:00
harddisks and DVD drives, also some other FireWire devices
like scanners.
firewire: additional help in Kconfig Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-01-07 16:33:59 -05:00
To compile this driver as a module, say M here: The module will be
firewire, ieee1394: update Kconfig help Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-25 19:36:53 -05:00
called firewire-sbp2.
firewire: additional help in Kconfig Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-01-07 16:33:59 -05:00
firewire: Add SBP-2 protocol driver for storage devices. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-19 19:58:40 -05:00
You should also enable support for disks, CD-ROMs, etc. in the SCSI
configuration section.
firewire: net: add Kconfig item, rename driver The driver is now called firewire-net. It might implement the transport of other networking protocols in the future, notably IPv6 per RFC 3146. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-07 16:57:53 -04:00
config FIREWIRE_NET
firewire: new stack is no longer experimental The new stack is now recommended over the old one if used for industrial video (IIDC/DCAM) or for storage devices (SBP-2) due to better performance, improved compatibility, added features, and security. It should also be functionally on par with and is more secure than the old ieee1394 stack in the use case of consumer video devices. IP-over-1394 support for the new stack is currently emerging, and a backend of the firedtv DVB driver to the new stack should be available soon. The one remaining area where the old stack is still required are audio devices, as the new stack is not yet able to support the FFADO FireWire audio framework. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16 16:36:34 -04:00
tristate "IP networking over 1394 (EXPERIMENTAL)"
depends on FIREWIRE && INET && EXPERIMENTAL
firewire: net: add Kconfig item, rename driver The driver is now called firewire-net. It might implement the transport of other networking protocols in the future, notably IPv6 per RFC 3146. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-07 16:57:53 -04:00
help
This enables IPv4 over IEEE 1394, providing IP connectivity with
other implementations of RFC 2734 as found on several operating
systems. Multicast support is currently limited.
firewire: new stack is no longer experimental The new stack is now recommended over the old one if used for industrial video (IIDC/DCAM) or for storage devices (SBP-2) due to better performance, improved compatibility, added features, and security. It should also be functionally on par with and is more secure than the old ieee1394 stack in the use case of consumer video devices. IP-over-1394 support for the new stack is currently emerging, and a backend of the firedtv DVB driver to the new stack should be available soon. The one remaining area where the old stack is still required are audio devices, as the new stack is not yet able to support the FFADO FireWire audio framework. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16 16:36:34 -04:00
NOTE, this driver is not stable yet!
firewire: net: add Kconfig item, rename driver The driver is now called firewire-net. It might implement the transport of other networking protocols in the future, notably IPv6 per RFC 3146. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-07 16:57:53 -04:00
To compile this driver as a module, say M here: The module will be
firewire, ieee1394: update Kconfig help Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-25 19:36:53 -05:00
called firewire-net.
source "drivers/ieee1394/Kconfig"
endmenu
Reference in New Issue Copy Permalink